Merge tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver specific changes from Arnd Bergmann:
 "These changes are all driver specific and cross over between arm-soc
  contents and some other subsystem, in these cases cpufreq, crypto,
  dma, pinctrl, mailbox and usb, and the subsystem owners agreed to have
  these changes merged through arm-soc.

  As we proceed to untangle the dependencies between platform code and
  driver code, the amount of changes in this category is fortunately
  shrinking, for 3.11 we have 16 branches here and 101 non-merge
  changesets, the majority of which are for the stedma40 dma engine
  driver used in the ux500 platform.  Cleaning up that code touches
  multiple subsystems, but gets rid of the dependency in the end.

  The mailbox code moved out from mach-omap2 to drivers/mailbox is an
  intermediate step and is still omap specific at the moment.  Patches
  exist to generalize the subsystem and add other drivers with the same
  API, but those did not make it for 3.11."

* tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (101 commits)
  crypto: ux500: use dmaengine_submit API
  crypto: ux500: use dmaengine_prep_slave_sg API
  crypto: ux500: use dmaengine_device_control API
  crypto: ux500/crypt: add missing __iomem qualifiers
  crypto: ux500/hash: add missing static qualifiers
  crypto: ux500/hash: use readl on iomem addresses
  dmaengine: ste_dma40: Declare memcpy config as static
  ARM: ux500: Remove mop500_snowball_ethernet_clock_enable()
  ARM: ux500: Correct the EN_3v3 regulator's on/off GPIO
  ARM: ux500: Provide a AB8500 GPIO Device Tree node
  gpio: rcar: fix gpio_rcar_of_table
  gpio-rcar: Remove #ifdef CONFIG_OF around OF-specific sections
  gpio-rcar: Reference core gpio documentation in the DT bindings
  clk: exynos5250: Add enum entries for divider clock of i2s1 and i2s2
  ARM: dts: Update Samsung I2S documentation
  ARM: dts: add clock provider information for i2s controllers in Exynos5250
  ARM: dts: add Exynos audio subsystem clock controller node
  clk: samsung: register audio subsystem clocks using common clock framework
  ARM: dts: use #include for all device trees for Samsung
  pinctrl: s3c24xx: use correct header for chained_irq functions
  ...

44 files changed, 4899 insertions, 572 deletions

diff --git a/drivers/clk/samsung/Makefile b/drivers/clk/samsung/Makefile
index b7c232e67425..187681013bdb 100644
--- a/drivers/clk/samsung/Makefile
+++ b/drivers/clk/samsung/Makefile
@@ -6,3 +6,4 @@ obj-$(CONFIG_COMMON_CLK)	+= clk.o clk-pll.o
 obj-$(CONFIG_ARCH_EXYNOS4)	+= clk-exynos4.o
 obj-$(CONFIG_SOC_EXYNOS5250)	+= clk-exynos5250.o
 obj-$(CONFIG_SOC_EXYNOS5440)	+= clk-exynos5440.o
+obj-$(CONFIG_ARCH_EXYNOS)	+= clk-exynos-audss.o
diff --git a/drivers/clk/samsung/clk-exynos-audss.c b/drivers/clk/samsung/clk-exynos-audss.c
new file mode 100644
index 000000000000..9b1bbd52fd1f
--- /dev/null
+++ b/drivers/clk/samsung/clk-exynos-audss.c
@@ -0,0 +1,133 @@
+/*
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ * Author: Padmavathi Venna <padma.v@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Common Clock Framework support for Audio Subsystem Clock Controller.
+*/
+
+#include <linux/clkdev.h>
+#include <linux/io.h>
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+#include <linux/syscore_ops.h>
+
+#include <dt-bindings/clk/exynos-audss-clk.h>
+
+static DEFINE_SPINLOCK(lock);
+static struct clk **clk_table;
+static void __iomem *reg_base;
+static struct clk_onecell_data clk_data;
+
+#define ASS_CLK_SRC 0x0
+#define ASS_CLK_DIV 0x4
+#define ASS_CLK_GATE 0x8
+
+static unsigned long reg_save[][2] = {
+	{ASS_CLK_SRC,  0},
+	{ASS_CLK_DIV,  0},
+	{ASS_CLK_GATE, 0},
+};
+
+/* list of all parent clock list */
+static const char *mout_audss_p[] = { "fin_pll", "fout_epll" };
+static const char *mout_i2s_p[] = { "mout_audss", "cdclk0", "sclk_audio0" };
+
+#ifdef CONFIG_PM_SLEEP
+static int exynos_audss_clk_suspend(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(reg_save); i++)
+		reg_save[i][1] = readl(reg_base + reg_save[i][0]);
+
+	return 0;
+}
+
+static void exynos_audss_clk_resume(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(reg_save); i++)
+		writel(reg_save[i][1], reg_base + reg_save[i][0]);
+}
+
+static struct syscore_ops exynos_audss_clk_syscore_ops = {
+	.suspend	= exynos_audss_clk_suspend,
+	.resume		= exynos_audss_clk_resume,
+};
+#endif /* CONFIG_PM_SLEEP */
+
+/* register exynos_audss clocks */
+void __init exynos_audss_clk_init(struct device_node *np)
+{
+	reg_base = of_iomap(np, 0);
+	if (!reg_base) {
+		pr_err("%s: failed to map audss registers\n", __func__);
+		return;
+	}
+
+	clk_table = kzalloc(sizeof(struct clk *) * EXYNOS_AUDSS_MAX_CLKS,
+				GFP_KERNEL);
+	if (!clk_table) {
+		pr_err("%s: could not allocate clk lookup table\n", __func__);
+		return;
+	}
+
+	clk_data.clks = clk_table;
+	clk_data.clk_num = EXYNOS_AUDSS_MAX_CLKS;
+	of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+
+	clk_table[EXYNOS_MOUT_AUDSS] = clk_register_mux(NULL, "mout_audss",
+				mout_audss_p, ARRAY_SIZE(mout_audss_p), 0,
+				reg_base + ASS_CLK_SRC, 0, 1, 0, &lock);
+
+	clk_table[EXYNOS_MOUT_I2S] = clk_register_mux(NULL, "mout_i2s",
+				mout_i2s_p, ARRAY_SIZE(mout_i2s_p), 0,
+				reg_base + ASS_CLK_SRC, 2, 2, 0, &lock);
+
+	clk_table[EXYNOS_DOUT_SRP] = clk_register_divider(NULL, "dout_srp",
+				"mout_audss", 0, reg_base + ASS_CLK_DIV, 0, 4,
+				0, &lock);
+
+	clk_table[EXYNOS_DOUT_AUD_BUS] = clk_register_divider(NULL,
+				"dout_aud_bus", "dout_srp", 0,
+				reg_base + ASS_CLK_DIV, 4, 4, 0, &lock);
+
+	clk_table[EXYNOS_DOUT_I2S] = clk_register_divider(NULL, "dout_i2s",
+				"mout_i2s", 0, reg_base + ASS_CLK_DIV, 8, 4, 0,
+				&lock);
+
+	clk_table[EXYNOS_SRP_CLK] = clk_register_gate(NULL, "srp_clk",
+				"dout_srp", CLK_SET_RATE_PARENT,
+				reg_base + ASS_CLK_GATE, 0, 0, &lock);
+
+	clk_table[EXYNOS_I2S_BUS] = clk_register_gate(NULL, "i2s_bus",
+				"dout_aud_bus", CLK_SET_RATE_PARENT,
+				reg_base + ASS_CLK_GATE, 2, 0, &lock);
+
+	clk_table[EXYNOS_SCLK_I2S] = clk_register_gate(NULL, "sclk_i2s",
+				"dout_i2s", CLK_SET_RATE_PARENT,
+				reg_base + ASS_CLK_GATE, 3, 0, &lock);
+
+	clk_table[EXYNOS_PCM_BUS] = clk_register_gate(NULL, "pcm_bus",
+				 "sclk_pcm", CLK_SET_RATE_PARENT,
+				reg_base + ASS_CLK_GATE, 4, 0, &lock);
+
+	clk_table[EXYNOS_SCLK_PCM] = clk_register_gate(NULL, "sclk_pcm",
+				"div_pcm0", CLK_SET_RATE_PARENT,
+				reg_base + ASS_CLK_GATE, 5, 0, &lock);
+
+#ifdef CONFIG_PM_SLEEP
+	register_syscore_ops(&exynos_audss_clk_syscore_ops);
+#endif
+
+	pr_info("Exynos: Audss: clock setup completed\n");
+}
+CLK_OF_DECLARE(exynos4210_audss_clk, "samsung,exynos4210-audss-clock",
+		exynos_audss_clk_init);
+CLK_OF_DECLARE(exynos5250_audss_clk, "samsung,exynos5250-audss-clock",
+		exynos_audss_clk_init);
diff --git a/drivers/clk/samsung/clk-exynos5250.c b/drivers/clk/samsung/clk-exynos5250.c
index 22d7699e7ced..6f767c515ec7 100644
--- a/drivers/clk/samsung/clk-exynos5250.c
+++ b/drivers/clk/samsung/clk-exynos5250.c
@@ -87,6 +87,7 @@ enum exynos5250_clks {
 	sclk_mmc0, sclk_mmc1, sclk_mmc2, sclk_mmc3, sclk_sata, sclk_usb3,
 	sclk_jpeg, sclk_uart0, sclk_uart1, sclk_uart2, sclk_uart3, sclk_pwm,
 	sclk_audio1, sclk_audio2, sclk_spdif, sclk_spi0, sclk_spi1, sclk_spi2,
+	div_i2s1, div_i2s2,
 
 	/* gate clocks */
 	gscl0 = 256, gscl1, gscl2, gscl3, gscl_wa, gscl_wb, smmu_gscl0,
@@ -291,8 +292,8 @@ struct samsung_div_clock exynos5250_div_clks[] __initdata = {
 	DIV(none, "div_pcm1", "sclk_audio1", DIV_PERIC4, 4, 8),
 	DIV(none, "div_audio2", "mout_audio2", DIV_PERIC4, 16, 4),
 	DIV(none, "div_pcm2", "sclk_audio2", DIV_PERIC4, 20, 8),
-	DIV(none, "div_i2s1", "sclk_audio1", DIV_PERIC5, 0, 6),
-	DIV(none, "div_i2s2", "sclk_audio2", DIV_PERIC5, 8, 6),
+	DIV(div_i2s1, "div_i2s1", "sclk_audio1", DIV_PERIC5, 0, 6),
+	DIV(div_i2s2, "div_i2s2", "sclk_audio2", DIV_PERIC5, 8, 6),
 	DIV(sclk_pixel, "div_hdmi_pixel", "sclk_vpll", DIV_DISP1_0, 28, 4),
 	DIV_A(none, "armclk", "div_arm", DIV_CPU0, 28, 3, "armclk"),
 	DIV_F(none, "div_mipi1_pre", "div_mipi1",
diff --git a/drivers/clocksource/clksrc-dbx500-prcmu.c b/drivers/clocksource/clksrc-dbx500-prcmu.c
index 54f3d119d99c..77398f8c19a0 100644
--- a/drivers/clocksource/clksrc-dbx500-prcmu.c
+++ b/drivers/clocksource/clksrc-dbx500-prcmu.c
@@ -10,7 +10,7 @@
  * DBx500-PRCMU Timer
  * The PRCMU has 5 timers which are available in a always-on
  * power domain.  We use the Timer 4 for our always-on clock
- * source on DB8500 and Timer 3 on DB5500.
+ * source on DB8500.
  */
 #include <linux/clockchips.h>
 #include <linux/clksrc-dbx500-prcmu.h>
@@ -30,15 +30,14 @@
 
 static void __iomem *clksrc_dbx500_timer_base;
 
-static cycle_t clksrc_dbx500_prcmu_read(struct clocksource *cs)
+static cycle_t notrace clksrc_dbx500_prcmu_read(struct clocksource *cs)
 {
+	void __iomem *base = clksrc_dbx500_timer_base;
 	u32 count, count2;
 
 	do {
-		count = readl(clksrc_dbx500_timer_base +
-			      PRCMU_TIMER_DOWNCOUNT);
-		count2 = readl(clksrc_dbx500_timer_base +
-			       PRCMU_TIMER_DOWNCOUNT);
+		count = readl_relaxed(base + PRCMU_TIMER_DOWNCOUNT);
+		count2 = readl_relaxed(base + PRCMU_TIMER_DOWNCOUNT);
 	} while (count2 != count);
 
 	/* Negate because the timer is a decrementing counter */
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index 6e57543fe0b9..a92440896868 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -96,6 +96,56 @@ config ARM_OMAP2PLUS_CPUFREQ
 	default ARCH_OMAP2PLUS
 	select CPU_FREQ_TABLE
 
+config ARM_S3C_CPUFREQ
+	bool
+	help
+	  Internal configuration node for common cpufreq on Samsung SoC
+
+config ARM_S3C24XX_CPUFREQ
+	bool "CPUfreq driver for Samsung S3C24XX series CPUs (EXPERIMENTAL)"
+	depends on ARCH_S3C24XX
+	select ARM_S3C_CPUFREQ
+	help
+	  This enables the CPUfreq driver for the Samsung S3C24XX family
+	  of CPUs.
+
+	  For details, take a look at <file:Documentation/cpu-freq>.
+
+	  If in doubt, say N.
+
+config ARM_S3C24XX_CPUFREQ_DEBUG
+	bool "Debug CPUfreq Samsung driver core"
+	depends on ARM_S3C24XX_CPUFREQ
+	help
+	  Enable s3c_freq_dbg for the Samsung S3C CPUfreq core
+
+config ARM_S3C24XX_CPUFREQ_IODEBUG
+	bool "Debug CPUfreq Samsung driver IO timing"
+	depends on ARM_S3C24XX_CPUFREQ
+	help
+	  Enable s3c_freq_iodbg for the Samsung S3C CPUfreq core
+
+config ARM_S3C24XX_CPUFREQ_DEBUGFS
+	bool "Export debugfs for CPUFreq"
+	depends on ARM_S3C24XX_CPUFREQ && DEBUG_FS
+	help
+	  Export status information via debugfs.
+
+config ARM_S3C2410_CPUFREQ
+	bool
+	depends on ARM_S3C24XX_CPUFREQ && CPU_S3C2410
+	select S3C2410_CPUFREQ_UTILS
+	help
+	  CPU Frequency scaling support for S3C2410
+
+config ARM_S3C2412_CPUFREQ
+	bool
+	depends on ARM_S3C24XX_CPUFREQ && CPU_S3C2412
+	default y
+	select S3C2412_IOTIMING
+	help
+	  CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs.
+
 config ARM_S3C2416_CPUFREQ
 	bool "S3C2416 CPU Frequency scaling support"
 	depends on CPU_S3C2416
@@ -118,6 +168,14 @@ config ARM_S3C2416_CPUFREQ_VCORESCALE
 
 	  If in doubt, say N.
 
+config ARM_S3C2440_CPUFREQ
+	bool "S3C2440/S3C2442 CPU Frequency scaling support"
+	depends on ARM_S3C24XX_CPUFREQ && (CPU_S3C2440 || CPU_S3C2442)
+	select S3C2410_CPUFREQ_UTILS
+	default y
+	help
+	  CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
+
 config ARM_S3C64XX_CPUFREQ
 	bool "Samsung S3C64XX"
 	depends on CPU_S3C6410
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index 315b9231feb1..6ad0b913ca17 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -65,7 +65,12 @@ obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ)	+= omap-cpufreq.o
 obj-$(CONFIG_PXA25x)			+= pxa2xx-cpufreq.o
 obj-$(CONFIG_PXA27x)			+= pxa2xx-cpufreq.o
 obj-$(CONFIG_PXA3xx)			+= pxa3xx-cpufreq.o
+obj-$(CONFIG_ARM_S3C24XX_CPUFREQ)	+= s3c24xx-cpufreq.o
+obj-$(CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS) += s3c24xx-cpufreq-debugfs.o
+obj-$(CONFIG_ARM_S3C2410_CPUFREQ)	+= s3c2410-cpufreq.o
+obj-$(CONFIG_ARM_S3C2412_CPUFREQ)	+= s3c2412-cpufreq.o
 obj-$(CONFIG_ARM_S3C2416_CPUFREQ)	+= s3c2416-cpufreq.o
+obj-$(CONFIG_ARM_S3C2440_CPUFREQ)	+= s3c2440-cpufreq.o
 obj-$(CONFIG_ARM_S3C64XX_CPUFREQ)	+= s3c64xx-cpufreq.o
 obj-$(CONFIG_ARM_S5PV210_CPUFREQ)	+= s5pv210-cpufreq.o
 obj-$(CONFIG_ARM_SA1100_CPUFREQ)	+= sa1100-cpufreq.o
diff --git a/drivers/cpufreq/s3c2410-cpufreq.c b/drivers/cpufreq/s3c2410-cpufreq.c
new file mode 100644
index 000000000000..cfa0dd8723ec
--- /dev/null
+++ b/drivers/cpufreq/s3c2410-cpufreq.c
@@ -0,0 +1,160 @@
+/*
+ * Copyright (c) 2006-2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 CPU Frequency scaling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/device.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/regs-clock.h>
+
+#include <plat/cpu.h>
+#include <plat/clock.h>
+#include <plat/cpu-freq-core.h>
+
+/* Note, 2410A has an extra mode for 1:4:4 ratio, bit 2 of CLKDIV */
+
+static void s3c2410_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
+{
+	u32 clkdiv = 0;
+
+	if (cfg->divs.h_divisor == 2)
+		clkdiv |= S3C2410_CLKDIVN_HDIVN;
+
+	if (cfg->divs.p_divisor != cfg->divs.h_divisor)
+		clkdiv |= S3C2410_CLKDIVN_PDIVN;
+
+	__raw_writel(clkdiv, S3C2410_CLKDIVN);
+}
+
+static int s3c2410_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
+{
+	unsigned long hclk, fclk, pclk;
+	unsigned int hdiv, pdiv;
+	unsigned long hclk_max;
+
+	fclk = cfg->freq.fclk;
+	hclk_max = cfg->max.hclk;
+
+	cfg->freq.armclk = fclk;
+
+	s3c_freq_dbg("%s: fclk is %lu, max hclk %lu\n",
+		      __func__, fclk, hclk_max);
+
+	hdiv = (fclk > cfg->max.hclk) ? 2 : 1;
+	hclk = fclk / hdiv;
+
+	if (hclk > cfg->max.hclk) {
+		s3c_freq_dbg("%s: hclk too big\n", __func__);
+		return -EINVAL;
+	}
+
+	pdiv = (hclk > cfg->max.pclk) ? 2 : 1;
+	pclk = hclk / pdiv;
+
+	if (pclk > cfg->max.pclk) {
+		s3c_freq_dbg("%s: pclk too big\n", __func__);
+		return -EINVAL;
+	}
+
+	pdiv *= hdiv;
+
+	/* record the result */
+	cfg->divs.p_divisor = pdiv;
+	cfg->divs.h_divisor = hdiv;
+
+	return 0;
+}
+
+static struct s3c_cpufreq_info s3c2410_cpufreq_info = {
+	.max		= {
+		.fclk	= 200000000,
+		.hclk	= 100000000,
+		.pclk	=  50000000,
+	},
+
+	/* transition latency is about 5ms worst-case, so
+	 * set 10ms to be sure */
+	.latency	= 10000000,
+
+	.locktime_m	= 150,
+	.locktime_u	= 150,
+	.locktime_bits	= 12,
+
+	.need_pll	= 1,
+
+	.name		= "s3c2410",
+	.calc_iotiming	= s3c2410_iotiming_calc,
+	.set_iotiming	= s3c2410_iotiming_set,
+	.get_iotiming	= s3c2410_iotiming_get,
+	.resume_clocks	= s3c2410_setup_clocks,
+
+	.set_fvco	= s3c2410_set_fvco,
+	.set_refresh	= s3c2410_cpufreq_setrefresh,
+	.set_divs	= s3c2410_cpufreq_setdivs,
+	.calc_divs	= s3c2410_cpufreq_calcdivs,
+
+	.debug_io_show	= s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs),
+};
+
+static int s3c2410_cpufreq_add(struct device *dev,
+			       struct subsys_interface *sif)
+{
+	return s3c_cpufreq_register(&s3c2410_cpufreq_info);
+}
+
+static struct subsys_interface s3c2410_cpufreq_interface = {
+	.name		= "s3c2410_cpufreq",
+	.subsys		= &s3c2410_subsys,
+	.add_dev	= s3c2410_cpufreq_add,
+};
+
+static int __init s3c2410_cpufreq_init(void)
+{
+	return subsys_interface_register(&s3c2410_cpufreq_interface);
+}
+arch_initcall(s3c2410_cpufreq_init);
+
+static int s3c2410a_cpufreq_add(struct device *dev,
+				struct subsys_interface *sif)
+{
+	/* alter the maximum freq settings for S3C2410A. If a board knows
+	 * it only has a maximum of 200, then it should register its own
+	 * limits. */
+
+	s3c2410_cpufreq_info.max.fclk = 266000000;
+	s3c2410_cpufreq_info.max.hclk = 133000000;
+	s3c2410_cpufreq_info.max.pclk =  66500000;
+	s3c2410_cpufreq_info.name = "s3c2410a";
+
+	return s3c2410_cpufreq_add(dev, sif);
+}
+
+static struct subsys_interface s3c2410a_cpufreq_interface = {
+	.name		= "s3c2410a_cpufreq",
+	.subsys		= &s3c2410a_subsys,
+	.add_dev	= s3c2410a_cpufreq_add,
+};
+
+static int __init s3c2410a_cpufreq_init(void)
+{
+	return subsys_interface_register(&s3c2410a_cpufreq_interface);
+}
+arch_initcall(s3c2410a_cpufreq_init);
diff --git a/drivers/cpufreq/s3c2412-cpufreq.c b/drivers/cpufreq/s3c2412-cpufreq.c
new file mode 100644
index 000000000000..4645b4898996
--- /dev/null
+++ b/drivers/cpufreq/s3c2412-cpufreq.c
@@ -0,0 +1,257 @@
+/*
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2412 CPU Frequency scalling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/regs-clock.h>
+#include <mach/s3c2412.h>
+
+#include <plat/cpu.h>
+#include <plat/clock.h>
+#include <plat/cpu-freq-core.h>
+
+/* our clock resources. */
+static struct clk *xtal;
+static struct clk *fclk;
+static struct clk *hclk;
+static struct clk *armclk;
+
+/* HDIV: 1, 2, 3, 4, 6, 8 */
+
+static int s3c2412_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
+{
+	unsigned int hdiv, pdiv, armdiv, dvs;
+	unsigned long hclk, fclk, armclk, armdiv_clk;
+	unsigned long hclk_max;
+
+	fclk = cfg->freq.fclk;
+	armclk = cfg->freq.armclk;
+	hclk_max = cfg->max.hclk;
+
+	/* We can't run hclk above armclk as at the best we have to
+	 * have armclk and hclk in dvs mode. */
+
+	if (hclk_max > armclk)
+		hclk_max = armclk;
+
+	s3c_freq_dbg("%s: fclk=%lu, armclk=%lu, hclk_max=%lu\n",
+		     __func__, fclk, armclk, hclk_max);
+	s3c_freq_dbg("%s: want f=%lu, arm=%lu, h=%lu, p=%lu\n",
+		     __func__, cfg->freq.fclk, cfg->freq.armclk,
+		     cfg->freq.hclk, cfg->freq.pclk);
+
+	armdiv = fclk / armclk;
+
+	if (armdiv < 1)
+		armdiv = 1;
+	if (armdiv > 2)
+		armdiv = 2;
+
+	cfg->divs.arm_divisor = armdiv;
+	armdiv_clk = fclk / armdiv;
+
+	hdiv = armdiv_clk / hclk_max;
+	if (hdiv < 1)
+		hdiv = 1;
+
+	cfg->freq.hclk = hclk = armdiv_clk / hdiv;
+
+	/* set dvs depending on whether we reached armclk or not. */
+	cfg->divs.dvs = dvs = armclk < armdiv_clk;
+
+	/* update the actual armclk we achieved. */
+	cfg->freq.armclk = dvs ? hclk : armdiv_clk;
+
+	s3c_freq_dbg("%s: armclk %lu, hclk %lu, armdiv %d, hdiv %d, dvs %d\n",
+		     __func__, armclk, hclk, armdiv, hdiv, cfg->divs.dvs);
+
+	if (hdiv > 4)
+		goto invalid;
+
+	pdiv = (hclk > cfg->max.pclk) ? 2 : 1;
+
+	if ((hclk / pdiv) > cfg->max.pclk)
+		pdiv++;
+
+	cfg->freq.pclk = hclk / pdiv;
+
+	s3c_freq_dbg("%s: pdiv %d\n", __func__, pdiv);
+
+	if (pdiv > 2)
+		goto invalid;
+
+	pdiv *= hdiv;
+
+	/* store the result, and then return */
+
+	cfg->divs.h_divisor = hdiv * armdiv;
+	cfg->divs.p_divisor = pdiv * armdiv;
+
+	return 0;
+
+invalid:
+	return -EINVAL;
+}
+
+static void s3c2412_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
+{
+	unsigned long clkdiv;
+	unsigned long olddiv;
+
+	olddiv = clkdiv = __raw_readl(S3C2410_CLKDIVN);
+
+	/* clear off current clock info */
+
+	clkdiv &= ~S3C2412_CLKDIVN_ARMDIVN;
+	clkdiv &= ~S3C2412_CLKDIVN_HDIVN_MASK;
+	clkdiv &= ~S3C2412_CLKDIVN_PDIVN;
+
+	if (cfg->divs.arm_divisor == 2)
+		clkdiv |= S3C2412_CLKDIVN_ARMDIVN;
+
+	clkdiv |= ((cfg->divs.h_divisor / cfg->divs.arm_divisor) - 1);
+
+	if (cfg->divs.p_divisor != cfg->divs.h_divisor)
+		clkdiv |= S3C2412_CLKDIVN_PDIVN;
+
+	s3c_freq_dbg("%s: div %08lx => %08lx\n", __func__, olddiv, clkdiv);
+	__raw_writel(clkdiv, S3C2410_CLKDIVN);
+
+	clk_set_parent(armclk, cfg->divs.dvs ? hclk : fclk);
+}
+
+static void s3c2412_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
+{
+	struct s3c_cpufreq_board *board = cfg->board;
+	unsigned long refresh;
+
+	s3c_freq_dbg("%s: refresh %u ns, hclk %lu\n", __func__,
+		     board->refresh, cfg->freq.hclk);
+
+	/* Reduce both the refresh time (in ns) and the frequency (in MHz)
+	 * by 10 each to ensure that we do not overflow 32 bit numbers. This
+	 * should work for HCLK up to 133MHz and refresh period up to 30usec.
+	 */
+
+	refresh = (board->refresh / 10);
+	refresh *= (cfg->freq.hclk / 100);
+	refresh /= (1 * 1000 * 1000);	/* 10^6 */
+
+	s3c_freq_dbg("%s: setting refresh 0x%08lx\n", __func__, refresh);
+	__raw_writel(refresh, S3C2412_REFRESH);
+}
+
+/* set the default cpu frequency information, based on an 200MHz part
+ * as we have no other way of detecting the speed rating in software.
+ */
+
+static struct s3c_cpufreq_info s3c2412_cpufreq_info = {
+	.max		= {
+		.fclk	= 200000000,
+		.hclk	= 100000000,
+		.pclk	=  50000000,
+	},
+
+	.latency	= 5000000, /* 5ms */
+
+	.locktime_m