Merge tag 'net-5.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
 "Networking fixes for 5.12-rc7, including fixes from can, ipsec,
  mac80211, wireless, and bpf trees.

  No scary regressions here or in the works, but small fixes for 5.12
  changes keep coming.

  Current release - regressions:

   - virtio: do not pull payload in skb->head

   - virtio: ensure mac header is set in virtio_net_hdr_to_skb()

   - Revert "net: correct sk_acceptq_is_full()"

   - mptcp: revert "mptcp: provide subflow aware release function"

   - ethernet: lan743x: fix ethernet frame cutoff issue

   - dsa: fix type was not set for devlink port

   - ethtool: remove link_mode param and derive link params from driver

   - sched: htb: fix null pointer dereference on a null new_q

   - wireless: iwlwifi: Fix softirq/hardirq disabling in
     iwl_pcie_enqueue_hcmd()

   - wireless: iwlwifi: fw: fix notification wait locking

   - wireless: brcmfmac: p2p: Fix deadlock introduced by avoiding the
     rtnl dependency

  Current release - new code bugs:

   - napi: fix hangup on napi_disable for threaded napi

   - bpf: take module reference for trampoline in module

   - wireless: mt76: mt7921: fix airtime reporting and related tx hangs

   - wireless: iwlwifi: mvm: rfi: don't lock mvm->mutex when sending
     config command

  Previous releases - regressions:

   - rfkill: revert back to old userspace API by default

   - nfc: fix infinite loop, refcount & memory leaks in LLCP sockets

   - let skb_orphan_partial wake-up waiters

   - xfrm/compat: Cleanup WARN()s that can be user-triggered

   - vxlan, geneve: do not modify the shared tunnel info when PMTU
     triggers an ICMP reply

   - can: fix msg_namelen values depending on CAN_REQUIRED_SIZE

   - can: uapi: mark union inside struct can_frame packed

   - sched: cls: fix action overwrite reference counting

   - sched: cls: fix err handler in tcf_action_init()

   - ethernet: mlxsw: fix ECN marking in tunnel decapsulation

   - ethernet: nfp: Fix a use after free in nfp_bpf_ctrl_msg_rx

   - ethernet: i40e: fix receiving of single packets in xsk zero-copy
     mode

   - ethernet: cxgb4: avoid collecting SGE_QBASE regs during traffic

  Previous releases - always broken:

   - bpf: Refuse non-O_RDWR flags in BPF_OBJ_GET

   - bpf: Refcount task stack in bpf_get_task_stack

   - bpf, x86: Validate computation of branch displacements

   - ieee802154: fix many similar syzbot-found bugs
       - fix NULL dereferences in netlink attribute handling
       - reject unsupported operations on monitor interfaces
       - fix error handling in llsec_key_alloc()

   - xfrm: make ipv4 pmtu check honor ip header df

   - xfrm: make hash generation lock per network namespace

   - xfrm: esp: delete NETIF_F_SCTP_CRC bit from features for esp
     offload

   - ethtool: fix incorrect datatype in set_eee ops

   - xdp: fix xdp_return_frame() kernel BUG throw for page_pool memory
     model

   - openvswitch: fix send of uninitialized stack memory in ct limit
     reply

  Misc:

   - udp: add get handling for UDP_GRO sockopt"

* tag 'net-5.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (182 commits)
  net: fix hangup on napi_disable for threaded napi
  net: hns3: Trivial spell fix in hns3 driver
  lan743x: fix ethernet frame cutoff issue
  net: ipv6: check for validity before dereferencing cfg->fc_nlinfo.nlh
  net: dsa: lantiq_gswip: Configure all remaining GSWIP_MII_CFG bits
  net: dsa: lantiq_gswip: Don't use PHY auto polling
  net: sched: sch_teql: fix null-pointer dereference
  ipv6: report errors for iftoken via netlink extack
  net: sched: fix err handler in tcf_action_init()
  net: sched: fix action overwrite reference counting
  Revert "net: sched: bump refcount for new action in ACT replace mode"
  ice: fix memory leak of aRFS after resuming from suspend
  i40e: Fix sparse warning: missing error code 'err'
  i40e: Fix sparse error: 'vsi->netdev' could be null
  i40e: Fix sparse error: uninitialized symbol 'ring'
  i40e: Fix sparse errors in i40e_txrx.c
  i40e: Fix parameters in aq_get_phy_register()
  nl80211: fix beacon head validation
  bpf, x86: Validate computation of branch displacements for x86-32
  bpf, x86: Validate computation of branch displacements for x86-64
  ...

85 files changed, 993 insertions, 370 deletions

diff --git a/drivers/net/can/spi/mcp251x.c b/drivers/net/can/spi/mcp251x.c
index f69fb4238a65..a57da43680d8 100644
--- a/drivers/net/can/spi/mcp251x.c
+++ b/drivers/net/can/spi/mcp251x.c
@@ -314,6 +314,18 @@ static int mcp251x_spi_trans(struct spi_device *spi, int len)
 	return ret;
 }
 
+static int mcp251x_spi_write(struct spi_device *spi, int len)
+{
+	struct mcp251x_priv *priv = spi_get_drvdata(spi);
+	int ret;
+
+	ret = spi_write(spi, priv->spi_tx_buf, len);
+	if (ret)
+		dev_err(&spi->dev, "spi write failed: ret = %d\n", ret);
+
+	return ret;
+}
+
 static u8 mcp251x_read_reg(struct spi_device *spi, u8 reg)
 {
 	struct mcp251x_priv *priv = spi_get_drvdata(spi);
@@ -361,7 +373,7 @@ static void mcp251x_write_reg(struct spi_device *spi, u8 reg, u8 val)
 	priv->spi_tx_buf[1] = reg;
 	priv->spi_tx_buf[2] = val;
 
-	mcp251x_spi_trans(spi, 3);
+	mcp251x_spi_write(spi, 3);
 }
 
 static void mcp251x_write_2regs(struct spi_device *spi, u8 reg, u8 v1, u8 v2)
@@ -373,7 +385,7 @@ static void mcp251x_write_2regs(struct spi_device *spi, u8 reg, u8 v1, u8 v2)
 	priv->spi_tx_buf[2] = v1;
 	priv->spi_tx_buf[3] = v2;
 
-	mcp251x_spi_trans(spi, 4);
+	mcp251x_spi_write(spi, 4);
 }
 
 static void mcp251x_write_bits(struct spi_device *spi, u8 reg,
@@ -386,7 +398,7 @@ static void mcp251x_write_bits(struct spi_device *spi, u8 reg,
 	priv->spi_tx_buf[2] = mask;
 	priv->spi_tx_buf[3] = val;
 
-	mcp251x_spi_trans(spi, 4);
+	mcp251x_spi_write(spi, 4);
 }
 
 static u8 mcp251x_read_stat(struct spi_device *spi)
@@ -618,7 +630,7 @@ static void mcp251x_hw_tx_frame(struct spi_device *spi, u8 *buf,
 					  buf[i]);
 	} else {
 		memcpy(priv->spi_tx_buf, buf, TXBDAT_OFF + len);
-		mcp251x_spi_trans(spi, TXBDAT_OFF + len);
+		mcp251x_spi_write(spi, TXBDAT_OFF + len);
 	}
 }
 
@@ -650,7 +662,7 @@ static void mcp251x_hw_tx(struct spi_device *spi, struct can_frame *frame,
 
 	/* use INSTRUCTION_RTS, to avoid "repeated frame problem" */
 	priv->spi_tx_buf[0] = INSTRUCTION_RTS(1 << tx_buf_idx);
-	mcp251x_spi_trans(priv->spi, 1);
+	mcp251x_spi_write(priv->spi, 1);
 }
 
 static void mcp251x_hw_rx_frame(struct spi_device *spi, u8 *buf,
@@ -888,7 +900,7 @@ static int mcp251x_hw_reset(struct spi_device *spi)
 	mdelay(MCP251X_OST_DELAY_MS);
 
 	priv->spi_tx_buf[0] = INSTRUCTION_RESET;
-	ret = mcp251x_spi_trans(spi, 1);
+	ret = mcp251x_spi_write(spi, 1);
 	if (ret)
 		return ret;
 
diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_core.c b/drivers/net/can/usb/peak_usb/pcan_usb_core.c
index 573b11559d73..28e916a04047 100644
--- a/drivers/net/can/usb/peak_usb/pcan_usb_core.c
+++ b/drivers/net/can/usb/peak_usb/pcan_usb_core.c
@@ -857,7 +857,7 @@ static int peak_usb_create_dev(const struct peak_usb_adapter *peak_usb_adapter,
 	if (dev->adapter->dev_set_bus) {
 		err = dev->adapter->dev_set_bus(dev, 0);
 		if (err)
-			goto lbl_unregister_candev;
+			goto adap_dev_free;
 	}
 
 	/* get device number early */
@@ -869,6 +869,10 @@ static int peak_usb_create_dev(const struct peak_usb_adapter *peak_usb_adapter,
 
 	return 0;
 
+adap_dev_free:
+	if (dev->adapter->dev_free)
+		dev->adapter->dev_free(dev);
+
 lbl_unregister_candev:
 	unregister_candev(netdev);
 
diff --git a/drivers/net/dsa/lantiq_gswip.c b/drivers/net/dsa/lantiq_gswip.c
index 52e865a3912c..bf5c62e5c0b0 100644
--- a/drivers/net/dsa/lantiq_gswip.c
+++ b/drivers/net/dsa/lantiq_gswip.c
@@ -93,8 +93,12 @@
 
 /* GSWIP MII Registers */
 #define GSWIP_MII_CFGp(p)		(0x2 * (p))
+#define  GSWIP_MII_CFG_RESET		BIT(15)
 #define  GSWIP_MII_CFG_EN		BIT(14)
+#define  GSWIP_MII_CFG_ISOLATE		BIT(13)
 #define  GSWIP_MII_CFG_LDCLKDIS		BIT(12)
+#define  GSWIP_MII_CFG_RGMII_IBS	BIT(8)
+#define  GSWIP_MII_CFG_RMII_CLK		BIT(7)
 #define  GSWIP_MII_CFG_MODE_MIIP	0x0
 #define  GSWIP_MII_CFG_MODE_MIIM	0x1
 #define  GSWIP_MII_CFG_MODE_RMIIP	0x2
@@ -190,6 +194,23 @@
 #define GSWIP_PCE_DEFPVID(p)		(0x486 + ((p) * 0xA))
 
 #define GSWIP_MAC_FLEN			0x8C5
+#define GSWIP_MAC_CTRL_0p(p)		(0x903 + ((p) * 0xC))
+#define  GSWIP_MAC_CTRL_0_PADEN		BIT(8)
+#define  GSWIP_MAC_CTRL_0_FCS_EN	BIT(7)
+#define  GSWIP_MAC_CTRL_0_FCON_MASK	0x0070
+#define  GSWIP_MAC_CTRL_0_FCON_AUTO	0x0000
+#define  GSWIP_MAC_CTRL_0_FCON_RX	0x0010
+#define  GSWIP_MAC_CTRL_0_FCON_TX	0x0020
+#define  GSWIP_MAC_CTRL_0_FCON_RXTX	0x0030
+#define  GSWIP_MAC_CTRL_0_FCON_NONE	0x0040
+#define  GSWIP_MAC_CTRL_0_FDUP_MASK	0x000C
+#define  GSWIP_MAC_CTRL_0_FDUP_AUTO	0x0000
+#define  GSWIP_MAC_CTRL_0_FDUP_EN	0x0004
+#define  GSWIP_MAC_CTRL_0_FDUP_DIS	0x000C
+#define  GSWIP_MAC_CTRL_0_GMII_MASK	0x0003
+#define  GSWIP_MAC_CTRL_0_GMII_AUTO	0x0000
+#define  GSWIP_MAC_CTRL_0_GMII_MII	0x0001
+#define  GSWIP_MAC_CTRL_0_GMII_RGMII	0x0002
 #define GSWIP_MAC_CTRL_2p(p)		(0x905 + ((p) * 0xC))
 #define GSWIP_MAC_CTRL_2_MLEN		BIT(3) /* Maximum Untagged Frame Lnegth */
 
@@ -653,16 +674,13 @@ static int gswip_port_enable(struct dsa_switch *ds, int port,
 			  GSWIP_SDMA_PCTRLp(port));
 
 	if (!dsa_is_cpu_port(ds, port)) {
-		u32 macconf = GSWIP_MDIO_PHY_LINK_AUTO |
-			      GSWIP_MDIO_PHY_SPEED_AUTO |
-			      GSWIP_MDIO_PHY_FDUP_AUTO |
-			      GSWIP_MDIO_PHY_FCONTX_AUTO |
-			      GSWIP_MDIO_PHY_FCONRX_AUTO |
-			      (phydev->mdio.addr & GSWIP_MDIO_PHY_ADDR_MASK);
-
-		gswip_mdio_w(priv, macconf, GSWIP_MDIO_PHYp(port));
-		/* Activate MDIO auto polling */
-		gswip_mdio_mask(priv, 0, BIT(port), GSWIP_MDIO_MDC_CFG0);
+		u32 mdio_phy = 0;
+
+		if (phydev)
+			mdio_phy = phydev->mdio.addr & GSWIP_MDIO_PHY_ADDR_MASK;
+
+		gswip_mdio_mask(priv, GSWIP_MDIO_PHY_ADDR_MASK, mdio_phy,
+				GSWIP_MDIO_PHYp(port));
 	}
 
 	return 0;
@@ -675,14 +693,6 @@ static void gswip_port_disable(struct dsa_switch *ds, int port)
 	if (!dsa_is_user_port(ds, port))
 		return;
 
-	if (!dsa_is_cpu_port(ds, port)) {
-		gswip_mdio_mask(priv, GSWIP_MDIO_PHY_LINK_DOWN,
-				GSWIP_MDIO_PHY_LINK_MASK,
-				GSWIP_MDIO_PHYp(port));
-		/* Deactivate MDIO auto polling */
-		gswip_mdio_mask(priv, BIT(port), 0, GSWIP_MDIO_MDC_CFG0);
-	}
-
 	gswip_switch_mask(priv, GSWIP_FDMA_PCTRL_EN, 0,
 			  GSWIP_FDMA_PCTRLp(port));
 	gswip_switch_mask(priv, GSWIP_SDMA_PCTRL_EN, 0,
@@ -794,14 +804,32 @@ static int gswip_setup(struct dsa_switch *ds)
 	gswip_switch_w(priv, BIT(cpu_port), GSWIP_PCE_PMAP2);
 	gswip_switch_w(priv, BIT(cpu_port), GSWIP_PCE_PMAP3);
 
-	/* disable PHY auto polling */
+	/* Deactivate MDIO PHY auto polling. Some PHYs as the AR8030 have an
+	 * interoperability problem with this auto polling mechanism because
+	 * their status registers think that the link is in a different state
+	 * than it actually is. For the AR8030 it has the BMSR_ESTATEN bit set
+	 * as well as ESTATUS_1000_TFULL and ESTATUS_1000_XFULL. This makes the
+	 * auto polling state machine consider the link being negotiated with
+	 * 1Gbit/s. Since the PHY itself is a Fast Ethernet RMII PHY this leads
+	 * to the switch port being completely dead (RX and TX are both not
+	 * working).
+	 * Also with various other PHY / port combinations (PHY11G GPHY, PHY22F
+	 * GPHY, external RGMII PEF7071/7072) any traffic would stop. Sometimes
+	 * it would work fine