Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:
 "This is the main pull request for MIPS for 4.7.  Here's the summary of
  the changes:

   - ATH79: Support for DTB passuing using the UHI boot protocol
   - ATH79: Remove support for builtin DTB.
   - ATH79: Add zboot debug serial support.
   - ATH79: Add initial support for Dragino MS14 (Dragine 2), Onion Omega
            and DPT-Module.
   - ATH79: Update devicetree clock support for AR9132 and AR9331.
   - ATH79: Cleanup the DT code.
   - ATH79: Support newer SOCs in ath79_ddr_ctrl_init.
   - ATH79: Fix regression in PCI window initialization.
   - BCM47xx: Move SPROM driver to drivers/firmware/
   - BCM63xx: Enable partition parser in defconfig.
   - BMIPS: BMIPS5000 has I cache filing from D cache
   - BMIPS: BMIPS: Add cpu-feature-overrides.h
   - BMIPS: Add Whirlwind support
   - BMIPS: Adjust mips-hpt-frequency for BCM7435
   - BMIPS: Remove maxcpus from BCM97435SVMB DTS
   - BMIPS: Add missing 7038 L1 register cells to BCM7435
   - BMIPS: Various tweaks to initialization code.
   - BMIPS: Enable partition parser in defconfig.
   - BMIPS: Cache tweaks.
   - BMIPS: Add UART, I2C and SATA devices to DT.
   - BMIPS: Add BCM6358 and BCM63268support
   - BMIPS: Add device tree example for BCM6358.
   - BMIPS: Improve Improve BCM6328 and BCM6368 device trees
   - Lantiq: Add support for device tree file from boot loader
   - Lantiq: Allow build with no built-in DT.
   - Loongson 3: Reserve 32MB for RS780E integrated GPU.
   - Loongson 3: Fix build error after ld-version.sh modification
   - Loongson 3: Move chipset ACPI code from drivers to arch.
   - Loongson 3: Speedup irq processing.
   - Loongson 3: Add basic Loongson 3A support.
   - Loongson 3: Set cache flush handlers to nop.
   - Loongson 3: Invalidate special TLBs when needed.
   - Loongson 3: Fast TLB refill handler.
   - MT7620: Fallback strategy for invalid syscfg0.
   - Netlogic: Fix CP0_EBASE redefinition warnings
   - Octeon: Initialization fixes
   - Octeon: Add DTS files for the D-Link DSR-1000N and EdgeRouter Lite
   - Octeon: Enable add Octeon-drivers in cavium_octeon_defconfig
   - Octeon: Correctly handle endian-swapped initramfs images.
   - Octeon: Support CN73xx, CN75xx and CN78xx.
   - Octeon: Remove dead code from cvmx-sysinfo.
   - Octeon: Extend number of supported CPUs past 32.
   - Octeon: Remove some code limiting NR_IRQS to 255.
   - Octeon: Simplify octeon_irq_ciu_gpio_set_type.
   - Octeon: Mark some functions __init in smp.c
   - Octeon: Octeon: Add Octeon III CN7xxx interface detection
   - PIC32: Add serial driver and bindings for it.
   - PIC32: Add PIC32 deadman timer driver and bindings.
   - PIC32: Add PIC32 clock timer driver and bindings.
   - Pistachio: Determine SoC revision during boot
   - Sibyte: Fix Kconfig dependencies of SIBYTE_BUS_WATCHER.
   - Sibyte: Strip redundant comments from bcm1480_regs.h.
   - Panic immediately if panic_on_oops is set.
   - module: fix incorrect IS_ERR_VALUE macro usage.
   - module: Make consistent use of pr_*
   - Remove no longer needed work_on_cpu() call.
   - Remove CONFIG_IPV6_PRIVACY from defconfigs.
   - Fix registers of non-crashing CPUs in dumps.
   - Handle MIPSisms in new vmcore_elf32_check_arch.
   - Select CONFIG_HANDLE_DOMAIN_IRQ and make it work.
   - Allow RIXI to be used on non-R2 or R6 cores.
   - Reserve nosave data for hibernation
   - Fix siginfo.h to use strict POSIX types.
   - Don't unwind user mode with EVA.
   - Fix watchpoint restoration
   - Ptrace watchpoints for R6.
   - Sync icache when it fills from dcache
   - I6400 I-cache fills from dcache.
   - Various MSA fixes.
   - Cleanup MIPS_CPU_* definitions.
   - Signal: Move generic copy_siginfo to signal.h
   - Signal: Fix uapi include in exported asm/siginfo.h
   - Timer fixes for sake of KVM.
   - XPA TLB refill fixes.
   - Treat perf counter feature
   - Update John Crispin's email address
   - Add PIC32 watchdog and bindings.
   - Handle R10000 LL/SC bug in set_pte()
   - cpufreq: Various fixes for Longson1.
   - R6: Fix R2 emulation.
   - mathemu: Cosmetic fix to ADDIUPC emulation, plenty of other small fixes
   - ELF: ABI and FP fixes.
   - Allow for relocatable kernel and use that to support KASLR.
   - Fix CPC_BASE_ADDR mask
   - Plenty fo smp-cps, CM, R6 and M6250 fixes.
   - Make reset_control_ops const.
   - Fix kernel command line handling of leading whitespace.
   - Cleanups to cache handling.
   - Add brcm, bcm6345-l1-intc device tree bindings.
   - Use generic clkdev.h header
   - Remove CLK_IS_ROOT usage.
   - Misc small cleanups.
   - CM: Fix compilation error when !MIPS_CM
   - oprofile: Fix a preemption issue
   - Detect DSP ASE v3 support:1"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (275 commits)
  MIPS: pic32mzda: fix getting timer clock rate.
  MIPS: ath79: fix regression in PCI window initialization
  MIPS: ath79: make ath79_ddr_ctrl_init() compatible for newer SoCs
  MIPS: Fix VZ probe gas errors with binutils <2.24
  MIPS: perf: Fix I6400 event numbers
  MIPS: DEC: Export `ioasic_ssr_lock' to modules
  MIPS: MSA: Fix a link error on `_init_msa_upper' with older GCC
  MIPS: CM: Fix compilation error when !MIPS_CM
  MIPS: Fix genvdso error on rebuild
  USB: ohci-jz4740: Remove obsolete driver
  MIPS: JZ4740: Probe OHCI platform device via DT
  MIPS: JZ4740: Qi LB60: Remove support for AVT2 variant
  MIPS: pistachio: Determine SoC revision during boot
  MIPS: BMIPS: Adjust mips-hpt-frequency for BCM7435
  mips: mt7620: fallback to SDRAM when syscfg0 does not have a valid value for the memory type
  MIPS: Prevent "restoration" of MSA context in non-MSA kernels
  MIPS: cevt-r4k: Dynamically calculate min_delta_ns
  MIPS: malta-time: Take seconds into account
  MIPS: malta-time: Start GIC count before syncing to RTC
  MIPS: Force CPUs to lose FP context during mode switches
  ...

28 files changed, 3915 insertions, 475 deletions

diff --git a/drivers/bus/brcmstb_gisb.c b/drivers/bus/brcmstb_gisb.c
index f364fa4d24eb..72fe0a5a8bf3 100644
--- a/drivers/bus/brcmstb_gisb.c
+++ b/drivers/bus/brcmstb_gisb.c
@@ -30,6 +30,10 @@
 #include <asm/signal.h>
 #endif
 
+#ifdef CONFIG_MIPS
+#include <asm/traps.h>
+#endif
+
 #define  ARB_ERR_CAP_CLEAR		(1 << 0)
 #define  ARB_ERR_CAP_STATUS_TIMEOUT	(1 << 12)
 #define  ARB_ERR_CAP_STATUS_TEA		(1 << 11)
@@ -238,6 +242,29 @@ static int brcmstb_bus_error_handler(unsigned long addr, unsigned int fsr,
 }
 #endif
 
+#ifdef CONFIG_MIPS
+static int brcmstb_bus_error_handler(struct pt_regs *regs, int is_fixup)
+{
+	int ret = 0;
+	struct brcmstb_gisb_arb_device *gdev;
+	u32 cap_status;
+
+	list_for_each_entry(gdev, &brcmstb_gisb_arb_device_list, next) {
+		cap_status = gisb_read(gdev, ARB_ERR_CAP_STATUS);
+
+		/* Invalid captured address, bail out */
+		if (!(cap_status & ARB_ERR_CAP_STATUS_VALID)) {
+			is_fixup = 1;
+			goto out;
+		}
+
+		ret |= brcmstb_gisb_arb_decode_addr(gdev, "bus error");
+	}
+out:
+	return is_fixup ? MIPS_BE_FIXUP : MIPS_BE_FATAL;
+}
+#endif
+
 static irqreturn_t brcmstb_gisb_timeout_handler(int irq, void *dev_id)
 {
 	brcmstb_gisb_arb_decode_addr(dev_id, "timeout");
@@ -355,6 +382,9 @@ static int __init brcmstb_gisb_arb_probe(struct platform_device *pdev)
 	hook_fault_code(22, brcmstb_bus_error_handler, SIGBUS, 0,
 			"imprecise external abort");
 #endif
+#ifdef CONFIG_MIPS
+	board_be_handler = brcmstb_bus_error_handler;
+#endif
 
 	dev_info(&pdev->dev, "registered mem: %p, irqs: %d, %d\n",
 			gdev->base, timeout_irq, tea_irq);
diff --git a/drivers/bus/mips_cdmm.c b/drivers/bus/mips_cdmm.c
index 1c543effe062..cad49bc38b3e 100644
--- a/drivers/bus/mips_cdmm.c
+++ b/drivers/bus/mips_cdmm.c
@@ -599,8 +599,8 @@ BUILD_PERDEV_HELPER(cpu_up)         /* int mips_cdmm_cpu_up_helper(...) */
  * mips_cdmm_bus_down() - Tear down the CDMM bus.
  * @data:	Pointer to unsigned int CPU number.
  *
- * This work_on_cpu callback function is executed on a given CPU to call the
- * CDMM driver cpu_down callback for all devices on that CPU.
+ * This function is executed on the hotplugged CPU and calls the CDMM
+ * driver cpu_down callback for all devices on that CPU.
  */
 static long mips_cdmm_bus_down(void *data)
 {
@@ -630,7 +630,9 @@ static long mips_cdmm_bus_down(void *data)
  * CDMM devices on that CPU, or to call the CDMM driver cpu_up callback for all
  * devices already discovered on that CPU.
  *
- * It is used during initialisation and when CPUs are brought online.
+ * It is used as work_on_cpu callback function during
+ * initialisation. When CPUs are brought online the function is
+ * invoked directly on the hotplugged CPU.
  */
 static long mips_cdmm_bus_up(void *data)
 {
@@ -677,10 +679,10 @@ static int mips_cdmm_cpu_notify(struct notifier_block *nb,
 	switch (action & ~CPU_TASKS_FROZEN) {
 	case CPU_ONLINE:
 	case CPU_DOWN_FAILED:
-		work_on_cpu(cpu, mips_cdmm_bus_up, &cpu);
+		mips_cdmm_bus_up(&cpu);
 		break;
 	case CPU_DOWN_PREPARE:
-		work_on_cpu(cpu, mips_cdmm_bus_down, &cpu);
+		mips_cdmm_bus_down(&cpu);
 		break;
 	default:
 		return NOTIFY_DONE;
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index c45554957499..90518cd7fc9c 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -197,6 +197,9 @@ config COMMON_CLK_PXA
 	---help---
 	  Support for the Marvell PXA SoC.
 
+config COMMON_CLK_PIC32
+	def_bool COMMON_CLK && MACH_PIC32
+
 source "drivers/clk/bcm/Kconfig"
 source "drivers/clk/hisilicon/Kconfig"
 source "drivers/clk/mvebu/Kconfig"
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 46869d696e4d..18e64bbeeaf4 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -58,6 +58,7 @@ obj-$(CONFIG_ARCH_MXC)			+= imx/
 obj-$(CONFIG_MACH_INGENIC)		+= ingenic/
 obj-$(CONFIG_COMMON_CLK_KEYSTONE)	+= keystone/
 obj-$(CONFIG_ARCH_MEDIATEK)		+= mediatek/
+obj-$(CONFIG_MACH_PIC32)		+= microchip/
 ifeq ($(CONFIG_COMMON_CLK), y)
 obj-$(CONFIG_ARCH_MMP)			+= mmp/
 endif
diff --git a/drivers/clk/microchip/Makefile b/drivers/clk/microchip/Makefile
new file mode 100644
index 000000000000..2152f418106a
--- /dev/null
+++ b/drivers/clk/microchip/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_COMMON_CLK_PIC32) += clk-core.o
+obj-$(CONFIG_PIC32MZDA) += clk-pic32mzda.o
diff --git a/drivers/clk/microchip/clk-core.c b/drivers/clk/microchip/clk-core.c
new file mode 100644
index 000000000000..ca85cea17839
--- /dev/null
+++ b/drivers/clk/microchip/clk-core.c
@@ -0,0 +1,1031 @@
+/*
+ * Purna Chandra Mandal,<purna.mandal@microchip.com>
+ * Copyright (C) 2015 Microchip Technology Inc.  All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ */
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/iopoll.h>
+#include <asm/mach-pic32/pic32.h>
+#include <asm/traps.h>
+
+#include "clk-core.h"
+
+/* OSCCON Reg fields */
+#define OSC_CUR_MASK		0x07
+#define OSC_CUR_SHIFT		12
+#define OSC_NEW_MASK		0x07
+#define OSC_NEW_SHIFT		8
+#define OSC_SWEN		BIT(0)
+
+/* SPLLCON Reg fields */
+#define PLL_RANGE_MASK		0x07
+#define PLL_RANGE_SHIFT		0
+#define PLL_ICLK_MASK		0x01
+#define PLL_ICLK_SHIFT		7
+#define PLL_IDIV_MASK		0x07
+#define PLL_IDIV_SHIFT		8
+#define PLL_ODIV_MASK		0x07
+#define PLL_ODIV_SHIFT		24
+#define PLL_MULT_MASK		0x7F
+#define PLL_MULT_SHIFT		16
+#define PLL_MULT_MAX		128
+#define PLL_ODIV_MIN		1
+#define PLL_ODIV_MAX		5
+
+/* Peripheral Bus Clock Reg Fields */
+#define PB_DIV_MASK		0x7f
+#define PB_DIV_SHIFT		0
+#define PB_DIV_READY		BIT(11)
+#define PB_DIV_ENABLE		BIT(15)
+#define PB_DIV_MAX		128
+#define PB_DIV_MIN		0
+
+/* Reference Oscillator Control Reg fields */
+#define REFO_SEL_MASK		0x0f
+#define REFO_SEL_SHIFT		0
+#define REFO_ACTIVE		BIT(8)
+#define REFO_DIVSW_EN		BIT(9)
+#define REFO_OE			BIT(12)
+#define REFO_ON			BIT(15)
+#define REFO_DIV_SHIFT		16
+#define REFO_DIV_MASK		0x7fff
+
+/* Reference Oscillator Trim Register Fields */
+#define REFO_TRIM_REG		0x10
+#define REFO_TRIM_MASK		0x1ff
+#define REFO_TRIM_SHIFT		23
+#define REFO_TRIM_MAX		511
+
+/* Mux Slew Control Register fields */
+#define SLEW_BUSY		BIT(0)
+#define SLEW_DOWNEN		BIT(1)
+#define SLEW_UPEN		BIT(2)
+#define SLEW_DIV		0x07
+#define SLEW_DIV_SHIFT		8
+#define SLEW_SYSDIV		0x0f
+#define SLEW_SYSDIV_SHIFT	20
+
+/* Clock Poll Timeout */
+#define LOCK_TIMEOUT_US         USEC_PER_MSEC
+
+/* SoC specific clock needed during SPLL clock rate switch */
+static struct clk_hw *pic32_sclk_hw;
+
+/* add instruction pipeline delay while CPU clock is in-transition. */
+#define cpu_nop5()			\
+do {					\
+	__asm__ __volatile__("nop");	\
+	__asm__ __volatile__("nop");	\
+	__asm__ __volatile__("nop");	\
+	__asm__ __volatile__("nop");	\
+	__asm__ __volatile__("nop");	\
+} while (0)
+
+/* Perpheral bus clocks */
+struct pic32_periph_clk {
+	struct clk_hw hw;
+	void __iomem *ctrl_reg;
+	struct pic32_clk_common *core;
+};
+
+#define clkhw_to_pbclk(_hw)	container_of(_hw, struct pic32_periph_clk, hw)
+
+static int pbclk_is_enabled(struct clk_hw *hw)
+{
+	struct pic32_periph_clk *pb = clkhw_to_pbclk(hw);
+
+	return readl(pb->ctrl_reg) & PB_DIV_ENABLE;
+}
+
+static int pbclk_enable(struct clk_hw *hw)
+{
+	struct pic32_periph_clk *pb = clkhw_to_pbclk(hw);
+
+	writel(PB_DIV_ENABLE, PIC32_SET(pb->ctrl_reg));
+	return 0;
+}
+
+static void pbclk_disable(struct clk_hw *hw)
+{
+	struct pic32_periph_clk *pb = clkhw_to_pbclk(hw);
+
+	writel(PB_DIV_ENABLE, PIC32_CLR(pb->ctrl_reg));
+}
+
+static unsigned long calc_best_divided_rate(unsigned long rate,
+					    unsigned long parent_rate,
+					    u32 divider_max,
+					    u32 divider_min)
+{
+	unsigned long divided_rate, divided_rate_down, best_rate;
+	unsigned long div, div_up;
+
+	/* eq. clk_rate = parent_rate / divider.
+	 *
+	 * Find best divider to produce closest of target divided rate.
+	 */
+	div = parent_rate / rate;
+	div = clamp_val(div, divider_min, divider_max);
+	div_up = clamp_val(div + 1, divider_min, divider_max);
+
+	divided_rate = parent_rate / div;
+	divided_rate_down = parent_rate / div_up;
+	if (abs(rate - divided_rate_down) < abs(rate - divided_rate))
+		best_rate = divided_rate_down;
+	else
+		best_rate = divided_rate;
+
+	return best_rate;
+}
+
+static inline u32 pbclk_read_pbdiv(struct pic32_periph_clk *pb)
+{
+	return ((readl(pb->ctrl_reg) >> PB_DIV_SHIFT) & PB_DIV_MASK) + 1;
+}
+
+static unsigned long pbclk_recalc_rate(struct clk_hw *hw,
+				       unsigned long parent_rate)
+{
+	struct pic32_periph_clk *pb = clkhw_to_pbclk(hw);
+
+	return parent_rate / pbclk_read_pbdiv(pb);
+}
+
+static long pbclk_round_rate(struct clk_hw *hw, unsigned long rate,
+			     unsigned long *parent_rate)
+{
+	return calc_best_divided_rate(rate, *parent_rate,
+				      PB_DIV_MAX, PB_DIV_MIN);
+}
+
+static int pbclk_set_rate(struct clk_hw *hw, unsigned long rate,
+			  unsigned long parent_rate)
+{
+	struct pic32_periph_clk *pb = clkhw_to_pbclk(hw);
+	unsigned long flags;
+	u32 v, div;
+	int err;
+
+	/* check & wait for DIV_READY */
+	err = readl_poll_timeout(pb->ctrl_reg, v, v & PB_DIV_READY,
+				 1, LOCK_TIMEOUT_US);
+	if (err)
+		return err;
+
+	/* calculate clkdiv and best rate */
+	div = DIV_ROUND_CLOSEST(parent_rate, rate);
+
+	spin_lock_irqsave(&pb->core->reg_lock, flags);
+
+	/* apply new div */
+	v = readl(pb->ctrl_reg);
+	v &= ~PB_DIV_MASK;
+	v |= (div - 1);
+
+	pic32_syskey_unlock();
+
+	writel(v, pb->ctrl_reg);
+
+	spin_unlock_irqrestore(&pb->core->reg_lock, flags);
+
+	/* wait again, for pbdivready */
+	err = readl_poll_timeout_atomic(pb->ctrl_reg, v, v & PB_DIV_READY,
+					1, LOCK_TIMEOUT_US);
+	if (err)
+		return err;
+
+	/* confirm that new div is applied correctly */
+	return (pbclk_read_pbdiv(pb) == div) ? 0 : -EBUSY;
+}
+
+const struct clk_ops pic32_pbclk_ops = {
+	.enable		= pbclk_enable,
+	.disable	= pbclk_disable,
+	.is_enabled	= pbclk_is_enabled,
+	.recalc_rate	= pbclk_recalc_rate,
+	.round_rate	= pbclk_round_rate,
+	.set_rate	= pbclk_set_rate,
+};
+
+struct clk *pic32_periph_clk_register(const struct pic32_periph_clk_data *desc,
+				      struct pic32_clk_common *core)
+{
+	struct pic32_periph_clk *pbclk;
+	struct clk *clk;
+
+	pbclk = devm_kzalloc(core->dev, sizeof(*pbclk), GFP_KERNEL);
+	if (!pbclk)
+		return ERR_PTR(-ENOMEM);
+
+	pbclk->hw.init = &desc->init_data;
+	pbclk->core = core;
+	pbclk->ctrl_reg = desc->ctrl_reg + core->iobase;
+
+	clk = devm_clk_register(core->dev, &pbclk->hw);
+	if (IS_ERR(clk)) {
+		dev_err(core->dev, "%s: clk_register() failed\n", __func__);
+		devm_kfree(core->dev, pbclk);
+	}
+
+	return clk;
+}
+
+/* Reference oscillator operations */
+struct pic32_ref_osc {
+	struct clk_hw hw;
+	void __iomem *ctrl_reg;
+	const u32 *parent_map;
+	struct pic32_clk_common *core;
+};
+
+#define clkhw_to_refosc(_hw)	container_of(_hw, struct pic32_ref_osc, hw)
+
+static int roclk_is_enabled(struct clk_hw *hw)
+{
+	struct pic32_ref_osc *refo = clkhw_to_refosc(hw);
+
+	return readl(refo->ctrl_reg) & REFO_ON;
+}
+
+static int roclk_enable(struct clk_hw *hw)
+{
+	struct pic32_ref_osc *refo = clkhw_to_refosc(hw);
+
+	writel(REFO_ON | REFO_OE, PIC32_SET(refo->ctrl_reg));
+	return 0;
+}
+
+static void roclk_disable(struct clk_hw *hw)
+{
+	struct pic32_ref_osc *refo = clkhw_to_refosc(hw);
+
+	writel(REFO_ON | REFO_OE, PIC32_CLR(refo->ctrl_reg));
+}
+
+static void roclk_init(struct clk_hw *hw)
+{
+	/* initialize clock in disabled state */
+	roclk_disable(hw);
+}
+
+static u8 roclk_get_parent(struct clk_hw *hw)
+{
+	struct pic32_ref_osc *refo = clkhw_to_refosc(hw);
+	u32 v, i;
+
+	v = (readl(refo->ctrl_reg) >> REFO_SEL_SHIFT) & REFO_SEL_MASK;
+
+	if (!refo->parent_map)
+		return v;
+
+	for (i = 0; i < clk_hw_get_num_parents(hw); i++)
+		if (refo->parent_map[i] == v)
+			return i;
+
+	return -EINVAL;
+}
+
+static unsigned long roclk_calc_rate(unsigned long parent_rate,
+				     u32 rodiv, u32 rotrim)
+{
+	u64 rate64;
+
+	/* fout = fin / [2 * {div + (trim / 512)}]
+	 *	= fin * 512 / [1024 * div + 2 * trim]
+	 *	= fin * 256 / (512 * div + trim)
+	 *	= (fin << 8) / ((div << 9) + trim)
+	 */
+	if (rotrim) {
+		rodiv = (rodiv << 9) + rotrim;
+		rate64 = parent_rate;
+		rate64 <<= 8;
+		do_div(rate64, rodiv);
+	} else if (rodiv) {
+		rate64 = parent_rate / (rodiv << 1);
+	} else {
+		rate64 = parent_rate;
+	}
+	return rate64;
+}
+
+static void roclk_calc_div_trim(unsigned long rate,
+				unsigned long parent_rate,
+				u32 *rodiv_p, u32 *rotrim_p)
+{
+	u32 div, rotrim, rodiv;
+	u64 frac;
+
+	/* Find integer approximation of floating-point arithmetic.
+	 *      fout = fin / [2 * {rodiv + (rotrim / 512)}] ... (1)
+	 * i.e. fout = fin / 2 * DIV
+	 *      whereas DIV = rodiv + (rotrim / 512)
+	 *
+	 * Since kernel does not perform floating-point arithmatic so
+	 * (rotrim/512) will be zero. And DIV & rodiv will result same.
+	 *
+	 * ie. fout = (fin * 256) / [(512 * rodiv) + rotrim]  ... from (1)
+	 * ie. rotrim = ((fin * 256) / fout) - (512 * DIV)
+	 */
+	if (parent_rate <= rate) {
+		div = 0;
+		frac = 0;
+		rodiv = 0;
+		rotrim = 0;
+	} else {
+		div = parent_rate / (rate << 1);
+		frac = parent_rate;
+		frac <<= 8;
+		do_div(frac, rate);
+		frac -= (u64)(div << 9);
+
+		rodiv = (div > REFO_DIV_MASK) ? REFO_DIV_MASK : div;
+		rotrim = (frac >= REFO_TRIM_MAX) ? REFO_TRIM_MAX : frac;
+	}
+
+	if (rodiv_p)
+		*rodiv_p = rodiv;
+
+	if (rotrim_p)
+		*rotrim_p = rotrim;
+}
+
+static unsigned long roclk_recalc_rate(struct clk_hw *hw,
+				       unsigned long parent_rate)
+{
+	struct pic32_ref_osc *refo = clkhw_to_refosc(hw);
+	u32 v, rodiv, rotrim;
+
+	/* get rodiv */
+	v = readl(refo->ctrl_reg);
+	rodiv = (v >> REFO_DIV_SHIFT) & REFO_DIV_MASK;
+
+	/* get trim */
+	v = readl(refo->ctrl_reg + REFO_TRIM_REG);
+	rotrim = (v >> REFO_TRIM_SHIFT) & REFO_TRIM_MASK;
+
+	return roclk_calc_rate(parent_rate, rodiv, rotrim);
+}
+
+static long roclk_round_rate(struct clk_hw *hw, unsigned long rate,
+			     unsigned long *parent_rate)
+{
+	u32 rotrim, rodiv;
+
+	/* calculate dividers for new rate */
+	roclk_calc_div_trim(rate, *parent_rate, &rodiv, &rotrim);
+
+	/* caclulate new rate (rounding) based on new rodiv & rotrim */
+	return roclk_calc_rate(*parent_rate, rodiv, rotrim);
+}
+
+static int roclk_determine_rate(struct clk_hw *hw,
+				struct clk_rate_request *req)
+{
+	struct clk_hw *parent_clk, *best_parent_clk = NULL;
+	unsigned int i, delta, best_delta = -1;
+	unsigned long parent_rate, best_parent_rate = 0;
+	unsigned long best = 0, nearest_rate;
+
+	/* find a parent which can generate nearest clkrate >= rate */
+	for (i = 0; i < clk_hw_get_num_parents(hw); i++) {
+		/* get parent */
+		parent_clk = clk_hw_get_parent_by_index(hw, i);
+		if (!parent_clk)
+			continue;
+
+		/* skip if parent runs slower than target rate */
+		parent_rate = clk_hw_get_rate(parent_clk);
+		if (req->rate > parent_rate)
+			continue;
+
+		nearest_rate = roclk_round_rate(hw, req->rate, &parent_rate);
+		delta = abs(nearest_rate - req->rate);
+		if ((nearest_rate >= req->rate) && (delta < best_delta)) {
+			best_parent_clk = parent_clk;
+			best_parent_rate = parent_rate;
+			best = nearest_rate;
+			best_delta = delta;
+
+			if (delta == 0)
+				break;
+		}
+	}
+
+	/* if no match found, retain old rate */
+	if (!best_parent_clk) {
+		pr_err("%s:%s, no parent found for rate %lu.\n",
+		       __func__, clk_hw_get_name(hw), req->rate);
+		return clk_hw_get_rate(hw);
+	}
+
+	pr_debug("%s,rate %lu, best_parent(%s, %lu), best %lu, delta %d\n",
+		 clk_hw_get_name(hw), req->rate,
+		 clk_hw_get_name(best_parent_clk), best_parent_rate,
+		 best, best_delta);
+
+	if (req->best_parent_rate)
+		req->best_parent_rate = best_parent_rate;
+
+	if (req->best_parent_hw)
+		req->best_parent_hw = best_parent_clk;
+
+	return best;
+}
+
+static int roclk_set_parent(struct clk_hw *hw, u8 index)
+{
+	struct pic32_ref_osc *refo = clkhw_to_refosc(hw);
+	unsigned long flags;
+	u32 v;
+	int err;
+
+	if (refo->parent_map)
+		index = refo->parent_map[index];
+
+	/* wait until ACTIVE bit is zero or timeout */
+	err = readl_poll_timeout(refo->ctrl_reg, v, !(v & REFO_ACTIVE),
+				 1, LOCK_TIMEOUT_US);
+	if (err) {
+		pr_err("%s: poll failed, clk active\n", clk_hw_get_name(hw));
+		return err;
+	}
+
+	spin_lock_irqsave(&refo->core->reg_lock, flags);
+
+	pic32_syskey_unlock();
+
+	/* calculate & apply new */
+	v = readl(refo->ctrl_reg);
+	v &= ~(REFO_SEL_MASK << REFO_SEL_SHIFT);
+	v |= index << REFO_SEL_SHIFT;
+
+	writel(v, refo->ctrl_reg);
+
+	spin_unlock_irqrestore(&refo->core->reg_lock, flags);
+
+	return 0;
+}
+
+static int roclk_set_rate_and_parent(struct clk_hw *hw,
+				     unsigned long rate,
+				     unsigned long parent_rate,
+				     u8 index)
+{
+	struct pic32_ref_osc *refo = clkhw_to_refosc(hw);
+	unsigned long flags;
+	u32 trim, rodiv, v;
+	int err;
+
+	/* calculate new rodiv & rotrim for new rate */
+	roclk_calc_div_trim(rate, parent_rate, &rodiv, &trim);
+
+	pr_debug("parent_rate = %lu, rate = %lu, div = %d, trim = %d\n",
+		 parent_rate, rate, rodiv, trim);
+
+	/* wait till source change is active */
+	err = readl_poll_timeout(refo->ctrl_reg, v,
+				 !(v & (REFO_ACTIVE | REFO_DIVSW_EN)),
+				 1, LOCK_TIMEOUT_US);
+	if (err) {
+		pr_err("%s: poll timedout, clock is still active\n", __func__);
+		return err;
+	}
+
+	spin_lock_irqsave(&refo->core->reg_lock, flags);
+	v = readl(refo->ctrl_reg);
+
+	pic32_syskey_unlock();
+
+	/* apply parent, if required */
+	if (refo->parent_map)
+		index = refo->parent_map[index];
+
+	v &= ~(REFO_SEL_MASK << REFO_SEL_SHIFT);
+	v |= index << REFO_SEL_SHIFT;
+
+	/* apply RODIV */
+	v &= ~(REFO_DIV_MASK << REFO_DIV_SHIFT);
+	v |= rodiv << REFO_DIV_SHIFT;
+	writel(v, refo->ctrl_reg);
+
+	/* apply ROTRIM */
+	v = readl(refo->ctrl_reg + REFO_TRIM_REG);
+	v &= ~(REFO_TRIM_MASK << REFO_TRIM_SHIFT);
+	v |= trim << REFO_TRIM_SHIFT;
+	writel(v, refo->ctrl_reg + REFO_TRIM_REG);
+
+	/* enable & activate divider switching */
+	writel(REFO_ON | REFO_DIVSW_EN, PIC32_SET(refo->ctrl_reg));
+
+	/* wait till divswen is in-progress */
+	err = readl_poll_timeout_atomic(refo->ctrl_reg, v, !(v & REFO_DIVSW_EN),
+					1, LOCK_TIMEOUT_US);
+	/* leave the clk gated as it was */
+	writel(REFO_ON, PIC32_CLR(refo->ctrl_reg));
+
+	spin_unlock_irqrestore(&refo->core->reg_lock, flags);
+
+	return err;
+}
+
+static int roclk_set_rate(struct clk_hw *hw, unsigned long rate,
+			  unsigned long parent_rate)
+{
+	u8 index = roclk_get_parent(hw);
+
+	return roclk_set_rate_and_parent(hw, rate, parent_rate, index);
+}
+
+const struct clk_ops pic32_roclk_ops = {
+	.enable			= roclk_enable,
+	.disable		= roclk_disable,
+	.is_enabled		= roclk_is_enabled,
+	.get_parent		= roclk_get_parent,
+	.set_parent		= roclk_set_parent,
+	.determine_rate		= roclk_determine_rate,
+	.recalc_rate		= roclk_recalc_rate,
+	.set_rate_and_parent	= roclk_set_rate_and_parent,
+	.set_rate		= roclk_set_rate,
+	.init			= roclk_init,
+};
+
+struct clk *pic32_refo_clk_register(const struct pic32_ref_osc_data *data,
+				    struct pic32_clk_common *core)
+{
+	struct pic32_ref_osc *refo;
+	struct clk *clk;
+
+	refo = devm_kzalloc(core->dev, sizeof(*refo), GFP_KERNEL);
+	if (!refo)
+		return ERR_PTR(-ENOMEM);
+
+	refo->core = core;
+	refo->hw.init = &data->init_data;
+	refo->ctrl_reg = data->ctrl_reg + core->iobase;
+	refo->parent_map = data->parent_map;
+
+	clk = devm_clk_register(core->dev, &refo->hw);
+	if (IS_ERR(clk))
+		dev_err(core->dev, "%s: clk_register() failed\n", __func__);
+
+	return clk;
+}
+
+struct pic32_sys_pll {
+	struct clk_hw hw;
+	void __iomem *ctrl_reg;
+	void __iomem *status_reg;
+	u32 lock_mask;
+	u32 idiv; /* PLL iclk divider, treated fixed */
+	struct pic32_clk_common *core;
+};
+
+#define clkhw_to_spll(_hw)	container_of(_hw, struct pic32_sys_pll, hw)
+
+static inline u32 spll_odiv_to_divider(u32 odiv)
+{
+	odiv = clamp_val(odiv, PLL_ODIV_MIN, PLL_ODIV_MAX);
+
+	return 1 << odiv;
+}
+
+static unsigned long spll_calc_mult_div(struct pic32_sys_pll *pll,
+					unsigned long rate,
+					unsigned long parent_rate,
+					u32 *mult_p, u32 *odiv_p)
+{
+	u32 mul, div, best_mul = 1, best_div = 1;
+	unsigned long new_rate, best_rate = rate;
+	unsigned int best_delta = -1, delta, match_found = 0;
+	u64 rate64;
+
+	parent_rate /= pll->idiv;
+
+	for (mul = 1; mul <= PLL_MULT_MAX; mul++) {
+		for (div = PLL_ODIV_MIN; div <= PLL_ODIV_MAX; div++) {
+			rate64 = parent_rate;
+			rate64 *= mul;
+			do_div(rate64, 1 << div);
+			new_rate = rate64;
+			delta = abs(rate - new_rate);
+			if ((new_rate >= rate) && (delta < best_delta)) {
+				best_delta = delta;
+				best_rate = new_rate;<