Merge branch 'for-linus' into for-next

Back-merge of 6.14 devel branch for further developments of TAS
codecsBack-merge of 6.14 devel branch for further developments.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

6 files changed, 43 insertions, 31 deletions

diff --git a/sound/usb/midi.c b/sound/usb/midi.c
index aa2b7c589c01..826ac870f246 100644
--- a/sound/usb/midi.c
+++ b/sound/usb/midi.c
@@ -1213,7 +1213,7 @@ static int snd_usbmidi_output_close(struct snd_rawmidi_substream *substream)
 {
 	struct usbmidi_out_port *port = substream->runtime->private_data;
 
-	cancel_work_sync(&port->ep->work);
+	flush_work(&port->ep->work);
 	return substream_open(substream, 0, 0);
 }
 
diff --git a/sound/usb/mixer_quirks.c b/sound/usb/mixer_quirks.c
index 79c8c1540ee2..49fb849f7d40 100644
--- a/sound/usb/mixer_quirks.c
+++ b/sound/usb/mixer_quirks.c
@@ -3688,8 +3688,7 @@ static const char *snd_djm_get_label(u8 device_idx, u16 wvalue, u16 windex)
 
 // common DJM capture level option values
 static const u16 snd_djm_opts_cap_level[] = {
-	0x0000, 0x0100, 0x0200, 0x0300, 0x400, 0x500 };
-
+	0x0000, 0x0100, 0x0200, 0x0300 };
 
 // DJM-250MK2
 static const u16 snd_djm_opts_250mk2_cap1[] = {
@@ -3831,6 +3830,8 @@ static const struct snd_djm_ctl snd_djm_ctls_750mk2[] = {
 
 
 // DJM-A9
+static const u16 snd_djm_opts_a9_cap_level[] = {
+	0x0000, 0x0100, 0x0200, 0x0300, 0x0400, 0x0500 };
 static const u16 snd_djm_opts_a9_cap1[] = {
 	0x0107, 0x0108, 0x0109, 0x010a, 0x010e,
 	0x111, 0x112, 0x113, 0x114, 0x0131, 0x132, 0x133, 0x134 };
@@ -3844,7 +3845,7 @@ static const u16 snd_djm_opts_a9_cap5[] = {
 	0x0501, 0x0502, 0x0503, 0x0505, 0x0506, 0x0507, 0x0508, 0x0509, 0x050a, 0x050e };
 
 static const struct snd_djm_ctl snd_djm_ctls_a9[] = {
-	SND_DJM_CTL("Capture Level", cap_level, 0, SND_DJM_WINDEX_CAPLVL),
+	SND_DJM_CTL("Capture Level", a9_cap_level, 0, SND_DJM_WINDEX_CAPLVL),
 	SND_DJM_CTL("Master Input",  a9_cap1, 3, SND_DJM_WINDEX_CAP),
 	SND_DJM_CTL("Ch1 Input",     a9_cap2, 2, SND_DJM_WINDEX_CAP),
 	SND_DJM_CTL("Ch2 Input",     a9_cap3, 2, SND_DJM_WINDEX_CAP),
diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c
index dea8bfaa7e91..9112313a9dbc 100644
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -1870,6 +1870,7 @@ void snd_usb_set_format_quirk(struct snd_usb_substream *subs,
 	case USB_ID(0x534d, 0x2109): /* MacroSilicon MS2109 */
 		subs->stream_offset_adj = 2;
 		break;
+	case USB_ID(0x2b73, 0x000a): /* Pioneer DJM-900NXS2 */
 	case USB_ID(0x2b73, 0x0013): /* Pioneer DJM-450 */
 		pioneer_djm_set_format_quirk(subs, 0x0082);
 		break;
diff --git a/sound/usb/usx2y/usbusx2y.c b/sound/usb/usx2y/usbusx2y.c
index 5f81c68fd42b..5756ff3528a2 100644
--- a/sound/usb/usx2y/usbusx2y.c
+++ b/sound/usb/usx2y/usbusx2y.c
@@ -151,6 +151,12 @@ static int snd_usx2y_card_used[SNDRV_CARDS];
 static void snd_usx2y_card_private_free(struct snd_card *card);
 static void usx2y_unlinkseq(struct snd_usx2y_async_seq *s);
 
+#ifdef USX2Y_NRPACKS_VARIABLE
+int nrpacks = USX2Y_NRPACKS; /* number of packets per urb */
+module_param(nrpacks, int, 0444);
+MODULE_PARM_DESC(nrpacks, "Number of packets per URB.");
+#endif
+
 /*
  * pipe 4 is used for switching the lamps, setting samplerate, volumes ....
  */
@@ -432,6 +438,11 @@ static int snd_usx2y_probe(struct usb_interface *intf,
 	struct snd_card *card;
 	int err;
 
+#ifdef USX2Y_NRPACKS_VARIABLE
+	if (nrpacks < 0 || nrpacks > USX2Y_NRPACKS_MAX)
+		return -EINVAL;
+#endif
+
 	if (le16_to_cpu(device->descriptor.idVendor) != 0x1604 ||
 	    (le16_to_cpu(device->descriptor.idProduct) != USB_ID_US122 &&
 	     le16_to_cpu(device->descriptor.idProduct) != USB_ID_US224 &&
diff --git a/sound/usb/usx2y/usbusx2y.h b/sound/usb/usx2y/usbusx2y.h
index 391fd7b4ed5e..6a76d04bf1c7 100644
--- a/sound/usb/usx2y/usbusx2y.h
+++ b/sound/usb/usx2y/usbusx2y.h
@@ -7,6 +7,32 @@
 
 #define NRURBS	        2
 
+/* Default value used for nr of packs per urb.
+ * 1 to 4 have been tested ok on uhci.
+ * To use 3 on ohci, you'd need a patch:
+ * look for "0000425-linux-2.6.9-rc4-mm1_ohci-hcd.patch.gz" on
+ * "https://bugtrack.alsa-project.org/alsa-bug/bug_view_page.php?bug_id=0000425"
+ *
+ * 1, 2 and 4 work out of the box on ohci, if I recall correctly.
+ * Bigger is safer operation, smaller gives lower latencies.
+ */
+#define USX2Y_NRPACKS 4
+
+#define USX2Y_NRPACKS_MAX 1024
+
+/* If your system works ok with this module's parameter
+ * nrpacks set to 1, you might as well comment
+ * this define out, and thereby produce smaller, faster code.
+ * You'd also set USX2Y_NRPACKS to 1 then.
+ */
+#define USX2Y_NRPACKS_VARIABLE 1
+
+#ifdef USX2Y_NRPACKS_VARIABLE
+extern int nrpacks;
+#define nr_of_packs() nrpacks
+#else
+#define nr_of_packs() USX2Y_NRPACKS
+#endif
 
 #define URBS_ASYNC_SEQ 10
 #define URB_DATA_LEN_ASYNC_SEQ 32
diff --git a/sound/usb/usx2y/usbusx2yaudio.c b/sound/usb/usx2y/usbusx2yaudio.c
index f540f46a0b14..acca8bead82e 100644
--- a/sound/usb/usx2y/usbusx2yaudio.c
+++ b/sound/usb/usx2y/usbusx2yaudio.c
@@ -28,33 +28,6 @@
 #include "usx2y.h"
 #include "usbusx2y.h"
 
-/* Default value used for nr of packs per urb.
- * 1 to 4 have been tested ok on uhci.
- * To use 3 on ohci, you'd need a patch:
- * look for "0000425-linux-2.6.9-rc4-mm1_ohci-hcd.patch.gz" on
- * "https://bugtrack.alsa-project.org/alsa-bug/bug_view_page.php?bug_id=0000425"
- *
- * 1, 2 and 4 work out of the box on ohci, if I recall correctly.
- * Bigger is safer operation, smaller gives lower latencies.
- */
-#define USX2Y_NRPACKS 4
-
-/* If your system works ok with this module's parameter
- * nrpacks set to 1, you might as well comment
- * this define out, and thereby produce smaller, faster code.
- * You'd also set USX2Y_NRPACKS to 1 then.
- */
-#define USX2Y_NRPACKS_VARIABLE 1
-
-#ifdef USX2Y_NRPACKS_VARIABLE
-static int nrpacks = USX2Y_NRPACKS; /* number of packets per urb */
-#define  nr_of_packs() nrpacks
-module_param(nrpacks, int, 0444);
-MODULE_PARM_DESC(nrpacks, "Number of packets per URB.");
-#else
-#define nr_of_packs() USX2Y_NRPACKS
-#endif
-
 static int usx2y_urb_capt_retire(struct snd_usx2y_substream *subs)
 {
 	struct urb	*urb = subs->completed_urb;