diff options
59 files changed, 2303 insertions, 1125 deletions
diff --git a/Documentation/devicetree/bindings/serial/8250.yaml b/Documentation/devicetree/bindings/serial/8250.yaml index c6bc27709bf7..e46bee8d25bf 100644 --- a/Documentation/devicetree/bindings/serial/8250.yaml +++ b/Documentation/devicetree/bindings/serial/8250.yaml @@ -49,6 +49,24 @@ allOf: - required: [ clock-frequency ] - required: [ clocks ] + - if: + properties: + compatible: + contains: + const: nxp,lpc1850-uart + then: + properties: + clock-names: + items: + - const: uartclk + - const: reg + else: + properties: + clock-names: + items: + - const: core + - const: bus + properties: compatible: oneOf: @@ -142,9 +160,22 @@ properties: clock-names: minItems: 1 - items: - - const: core - - const: bus + maxItems: 2 + oneOf: + - items: + - const: core + - const: bus + - items: + - const: uartclk + - const: reg + + dmas: + minItems: 1 + maxItems: 4 + + dma-names: + minItems: 1 + maxItems: 4 resets: maxItems: 1 @@ -237,9 +268,13 @@ if: properties: compatible: contains: - const: spacemit,k1-uart + enum: + - spacemit,k1-uart + - nxp,lpc1850-uart then: - required: [clock-names] + required: + - clocks + - clock-names properties: clocks: minItems: 2 diff --git a/Documentation/devicetree/bindings/serial/mediatek,uart.yaml b/Documentation/devicetree/bindings/serial/mediatek,uart.yaml index c55d9a0efa19..5bd8a8853ae0 100644 --- a/Documentation/devicetree/bindings/serial/mediatek,uart.yaml +++ b/Documentation/devicetree/bindings/serial/mediatek,uart.yaml @@ -25,6 +25,7 @@ properties: - enum: - mediatek,mt2701-uart - mediatek,mt2712-uart + - mediatek,mt6572-uart - mediatek,mt6580-uart - mediatek,mt6582-uart - mediatek,mt6589-uart diff --git a/Documentation/devicetree/bindings/serial/qcom,sa8255p-geni-uart.yaml b/Documentation/devicetree/bindings/serial/qcom,sa8255p-geni-uart.yaml new file mode 100644 index 000000000000..c8f01923cb25 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/qcom,sa8255p-geni-uart.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/serial/qcom,sa8255p-geni-uart.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Geni based QUP UART interface + +maintainers: + - Praveen Talari <quic_ptalari@quicinc.com> + +allOf: + - $ref: /schemas/serial/serial.yaml# + +properties: + compatible: + enum: + - qcom,sa8255p-geni-uart + - qcom,sa8255p-geni-debug-uart + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + items: + - description: UART core irq + - description: Wakeup irq (RX GPIO) + + interrupt-names: + description: + The UART interrupt and optionally the RX in-band wakeup interrupt + as not all UART instances have a wakeup-capable interrupt routed + via the PDC. + minItems: 1 + items: + - const: uart + - const: wakeup + + power-domains: + minItems: 2 + maxItems: 2 + + power-domain-names: + items: + - const: power + - const: perf + +required: + - compatible + - reg + - interrupts + - power-domains + - power-domain-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + serial@990000 { + compatible = "qcom,sa8255p-geni-uart"; + reg = <0x990000 0x4000>; + interrupts = <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&scmi0_pd 0>, <&scmi0_dvfs 0>; + power-domain-names = "power", "perf"; + }; +... diff --git a/Documentation/devicetree/bindings/serial/renesas,hscif.yaml b/Documentation/devicetree/bindings/serial/renesas,hscif.yaml index 9480ed30915c..4b3f98a46cd9 100644 --- a/Documentation/devicetree/bindings/serial/renesas,hscif.yaml +++ b/Documentation/devicetree/bindings/serial/renesas,hscif.yaml @@ -63,6 +63,12 @@ properties: - const: renesas,rcar-gen4-hscif # R-Car Gen4 - const: renesas,hscif # generic HSCIF compatible UART + - items: + - enum: + - renesas,hscif-r8a78000 # R-Car X5H + - const: renesas,rcar-gen5-hscif # R-Car Gen5 + - const: renesas,hscif # generic HSCIF compatible UART + reg: maxItems: 1 @@ -120,6 +126,7 @@ if: - renesas,rcar-gen2-hscif - renesas,rcar-gen3-hscif - renesas,rcar-gen4-hscif + - renesas,rcar-gen5-hscif then: required: - resets diff --git a/Documentation/devicetree/bindings/serial/renesas,rsci.yaml b/Documentation/devicetree/bindings/serial/renesas,rsci.yaml index ea879db5f485..f50d8e02f476 100644 --- a/Documentation/devicetree/bindings/serial/renesas,rsci.yaml +++ b/Documentation/devicetree/bindings/serial/renesas,rsci.yaml @@ -8,14 +8,20 @@ title: Renesas RSCI Serial Communication Interface maintainers: - Geert Uytterhoeven <geert+renesas@glider.be> - - Thierry Bultel <thierry.bultel.yh@bp.renesas.com> + - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> allOf: - $ref: serial.yaml# properties: compatible: - const: renesas,r9a09g077-rsci # RZ/T2H + oneOf: + - items: + - const: renesas,r9a09g087-rsci # RZ/N2H + - const: renesas,r9a09g077-rsci # RZ/T2H + + - items: + - const: renesas,r9a09g077-rsci # RZ/T2H reg: maxItems: 1 @@ -35,10 +41,15 @@ properties: - const: tei clocks: - maxItems: 1 + minItems: 2 + maxItems: 3 clock-names: - const: fck # UART functional clock + minItems: 2 + items: + - const: operation + - const: bus + - const: sck # optional external clock input power-domains: maxItems: 1 @@ -60,10 +71,6 @@ examples: #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/renesas-cpg-mssr.h> - aliases { - serial0 = &sci0; - }; - sci0: serial@80005000 { compatible = "renesas,r9a09g077-rsci"; reg = <0x80005000 0x400>; @@ -72,7 +79,7 @@ examples: <GIC_SPI 592 IRQ_TYPE_EDGE_RISING>, <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "eri", "rxi", "txi", "tei"; - clocks = <&cpg CPG_MOD 108>; - clock-names = "fck"; + clocks = <&cpg CPG_MOD 8>, <&cpg CPG_CORE 13>; + clock-names = "operation", "bus"; power-domains = <&cpg>; }; diff --git a/Documentation/devicetree/bindings/serial/renesas,scif.yaml b/Documentation/devicetree/bindings/serial/renesas,scif.yaml index 8e82999e6acb..e925cd4c3ac8 100644 --- a/Documentation/devicetree/bindings/serial/renesas,scif.yaml +++ b/Documentation/devicetree/bindings/serial/renesas,scif.yaml @@ -72,6 +72,12 @@ properties: - items: - enum: + - renesas,scif-r8a78000 # R-Car X5H + - const: renesas,rcar-gen5-scif # R-Car Gen5 + - const: renesas,scif # generic SCIF compatible UART + + - items: + - enum: - renesas,scif-r9a07g044 # RZ/G2{L,LC} - items: @@ -86,6 +92,7 @@ properties: - items: - enum: - renesas,scif-r9a09g047 # RZ/G3E + - renesas,scif-r9a09g056 # RZ/V2N - const: renesas,scif-r9a09g057 # RZ/V2H fallback reg: @@ -174,6 +181,7 @@ allOf: - renesas,rcar-gen2-scif - renesas,rcar-gen3-scif - renesas,rcar-gen4-scif + - renesas,rcar-gen5-scif - renesas,scif-r9a07g044 - renesas,scif-r9a09g057 then: diff --git a/Documentation/devicetree/bindings/serial/samsung_uart.yaml b/Documentation/devicetree/bindings/serial/samsung_uart.yaml index 83d9986d8e98..1a1f991d5364 100644 --- a/Documentation/devicetree/bindings/serial/samsung_uart.yaml +++ b/Documentation/devicetree/bindings/serial/samsung_uart.yaml @@ -30,6 +30,10 @@ properties: - samsung,exynos8895-uart - items: - enum: + - samsung,exynos2200-uart + - const: google,gs101-uart + - items: + - enum: - samsung,exynos7-uart - tesla,fsd-uart - const: samsung,exynos4210-uart diff --git a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml index 8f1b7f704c5b..cb9da6c97afc 100644 --- a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml +++ b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml @@ -108,6 +108,9 @@ properties: parameter. Define this if your UART does not implement the busy functionality. type: boolean + power-domains: + maxItems: 1 + resets: minItems: 1 maxItems: 2 diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,sa8255p-geni-se-qup.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,sa8255p-geni-se-qup.yaml new file mode 100644 index 000000000000..352af3426d34 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,sa8255p-geni-se-qup.yaml @@ -0,0 +1,107 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/qcom/qcom,sa8255p-geni-se-qup.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: GENI Serial Engine QUP Wrapper Controller + +maintainers: + - Praveen Talari <quic_ptalari@quicinc.com> + +description: + Generic Interface (GENI) based Qualcomm Universal Peripheral (QUP) wrapper + is a programmable module for supporting a wide range of serial interfaces + like UART, SPI, I2C, I3C, etc. A single QUP module can provide up to 8 Serial + Interfaces, using its internal Serial Engines. The GENI Serial Engine QUP + Wrapper controller is modeled as a node with zero or more child nodes each + representing a serial engine. + +properties: + compatible: + const: qcom,sa8255p-geni-se-qup + + reg: + description: QUP wrapper common register address and length. + maxItems: 1 + + "#address-cells": + const: 2 + + "#size-cells": + const: 2 + + ranges: true + + iommus: + maxItems: 1 + + dma-coherent: true + +patternProperties: + "spi@[0-9a-f]+$": + type: object + description: GENI serial engine based SPI controller. SPI in master mode + supports up to 50MHz, up to four chip selects, programmable + data path from 4 bits to 32 bits and numerous protocol + variants. + additionalProperties: true + + properties: + compatible: + const: qcom,sa8255p-geni-spi + + "i2c@[0-9a-f]+$": + type: object + description: GENI serial engine based I2C controller. + additionalProperties: true + + properties: + compatible: + const: qcom,sa8255p-geni-i2c + + "serial@[0-9a-f]+$": + type: object + description: GENI Serial Engine based UART Controller. + additionalProperties: true + + properties: + compatible: + enum: + - qcom,sa8255p-geni-uart + - qcom,sa8255p-geni-debug-uart + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + - ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + geniqup@9c0000 { + compatible = "qcom,sa8255p-geni-se-qup"; + reg = <0 0x9c0000 0 0x6000>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + serial@990000 { + compatible = "qcom,sa8255p-geni-uart"; + reg = <0 0x990000 0 0x4000>; + interrupts = <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&scmi0_pd 0>, <&scmi0_dvfs 0>; + power-domain-names = "power", "perf"; + }; + }; + }; +... diff --git a/Documentation/driver-api/serial/driver.rst b/Documentation/driver-api/serial/driver.rst index fa1ebfcd4472..c1db6a1a67c4 100644 --- a/Documentation/driver-api/serial/driver.rst +++ b/Documentation/driver-api/serial/driver.rst @@ -24,9 +24,8 @@ console support. Console Support --------------- -The serial core provides a few helper functions. This includes identifying -the correct port structure (via uart_get_console()) and decoding command line -arguments (uart_parse_options()). +The serial core provides a few helper functions. This includes +decoding command line arguments (uart_parse_options()). There is also a helper function (uart_console_write()) which performs a character by character write, translating newlines to CRLF sequences. @@ -76,7 +75,7 @@ Other functions uart_add_one_port uart_remove_one_port uart_console_write uart_parse_earlycon uart_parse_options uart_set_options uart_get_lsr_info uart_handle_dcd_change uart_handle_cts_change - uart_try_toggle_sysrq uart_get_console + uart_try_toggle_sysrq .. kernel-doc:: include/linux/serial_core.h :identifiers: uart_port_tx_limited uart_port_tx diff --git a/Documentation/driver-api/tty/tty_port.rst b/Documentation/driver-api/tty/tty_port.rst index 5cb90e954fcf..504a353f2682 100644 --- a/Documentation/driver-api/tty/tty_port.rst +++ b/Documentation/driver-api/tty/tty_port.rst @@ -42,9 +42,10 @@ TTY Refcounting TTY Helpers ----------- +.. kernel-doc:: include/linux/tty_port.h + :identifiers: tty_port_tty_hangup tty_port_tty_vhangup .. kernel-doc:: drivers/tty/tty_port.c - :identifiers: tty_port_tty_hangup tty_port_tty_wakeup - + :identifiers: tty_port_tty_wakeup Modem Signals ------------- diff --git a/arch/m68k/amiga/config.c b/arch/m68k/amiga/config.c index 0147130dc34e..242d18e750b0 100644 --- a/arch/m68k/amiga/config.c +++ b/arch/m68k/amiga/config.c @@ -16,12 +16,10 @@ #include <linux/kernel.h> #include <linux/mm.h> #include <linux/seq_file.h> -#include <linux/tty.h> #include <linux/clocksource.h> #include <linux/console.h> #include <linux/rtc.h> #include <linux/init.h> -#include <linux/vt_kern.h> #include <linux/delay.h> #include <linux/interrupt.h> #include <linux/zorro.h> diff --git a/arch/m68k/apollo/config.c b/arch/m68k/apollo/config.c index e161ecd76035..e324c5f671de 100644 --- a/arch/m68k/apollo/config.c +++ b/arch/m68k/apollo/config.c @@ -3,9 +3,7 @@ #include <linux/types.h> #include <linux/kernel.h> #include <linux/mm.h> -#include <linux/tty.h> #include <linux/rtc.h> -#include <linux/vt_kern.h> #include <linux/interrupt.h> #include <asm/setup.h> diff --git a/arch/m68k/atari/config.c b/arch/m68k/atari/config.c index b48a0606a000..ee2d061efb2a 100644 --- a/arch/m68k/atari/config.c +++ b/arch/m68k/atari/config.c @@ -33,7 +33,6 @@ #include <linux/ioport.h> #include <linux/platform_device.h> #include <linux/usb/isp116x.h> -#include <linux/vt_kern.h> #include <linux/module.h> #include <asm/bootinfo.h> diff --git a/arch/m68k/mac/config.c b/arch/m68k/mac/config.c index d26c7f4f8c36..c0033f885ed4 100644 --- a/arch/m68k/mac/config.c +++ b/arch/m68k/mac/config.c @@ -15,7 +15,6 @@ #include <linux/reboot.h> #include <linux/types.h> #include <linux/mm.h> -#include <linux/tty.h> #include <linux/console.h> #include <linux/interrupt.h> /* keyb */ @@ -23,7 +22,6 @@ #include <linux/delay.h> /* keyb */ #include <linux/init.h> -#include <linux/vt_kern.h> #include <linux/platform_device.h> #include <linux/ata_platform.h> #include <linux/adb.h> diff --git a/arch/m68k/q40/config.c b/arch/m68k/q40/config.c index de7870ad2a30..5a4258697622 100644 --- a/arch/m68k/q40/config.c +++ b/arch/m68k/q40/config.c @@ -13,14 +13,12 @@ #include <linux/types.h> #include <linux/kernel.h> #include <linux/mm.h> -#include <linux/tty.h> #include <linux/console.h> #include <linux/linkage.h> #include <linux/init.h> #include <linux/major.h> #include <linux/serial_reg.h> #include <linux/rtc.h> -#include <linux/vt_kern.h> #include <linux/bcd.h> #include <linux/platform_device.h> diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c index 1da2f6e7d2a1..ae1906bfe8a5 100644 --- a/arch/powerpc/kernel/legacy_serial.c +++ b/arch/powerpc/kernel/legacy_serial.c @@ -54,9 +54,10 @@ static int legacy_serial_console = -1; static const upf_t legacy_port_flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_FIXED_PORT; -static unsigned int tsi_serial_in(str |