diff options
40 files changed, 895 insertions, 302 deletions
diff --git a/Documentation/ABI/testing/sysfs-power b/Documentation/ABI/testing/sysfs-power index f99d433ff311..a3942b1036e2 100644 --- a/Documentation/ABI/testing/sysfs-power +++ b/Documentation/ABI/testing/sysfs-power @@ -413,6 +413,35 @@ Description: The /sys/power/suspend_stats/last_failed_step file contains the last failed step in the suspend/resume path. +What: /sys/power/suspend_stats/last_hw_sleep +Date: June 2023 +Contact: Mario Limonciello <mario.limonciello@amd.com> +Description: + The /sys/power/suspend_stats/last_hw_sleep file + contains the duration of time spent in a hardware sleep + state in the most recent system suspend-resume cycle. + This number is measured in microseconds. + +What: /sys/power/suspend_stats/total_hw_sleep +Date: June 2023 +Contact: Mario Limonciello <mario.limonciello@amd.com> +Description: + The /sys/power/suspend_stats/total_hw_sleep file + contains the aggregate of time spent in a hardware sleep + state since the kernel was booted. This number + is measured in microseconds. + +What: /sys/power/suspend_stats/max_hw_sleep +Date: June 2023 +Contact: Mario Limonciello <mario.limonciello@amd.com> +Description: + The /sys/power/suspend_stats/max_hw_sleep file + contains the maximum amount of time that the hardware can + report for time spent in a hardware sleep state. When sleep + cycles are longer than this time, the values for + 'total_hw_sleep' and 'last_hw_sleep' may not be accurate. + This number is measured in microseconds. + What: /sys/power/sync_on_suspend Date: October 2019 Contact: Jonas Meurer <jonas@freesources.org> diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index 10e2e5c3ff0b..bbecbd5797a3 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -339,6 +339,29 @@ This mode requires kvm-amd.avic=1. (Default when IOMMU HW support is present.) + amd_pstate= [X86] + disable + Do not enable amd_pstate as the default + scaling driver for the supported processors + passive + Use amd_pstate with passive mode as a scaling driver. + In this mode autonomous selection is disabled. + Driver requests a desired performance level and platform + tries to match the same performance level if it is + satisfied by guaranteed performance level. + active + Use amd_pstate_epp driver instance as the scaling driver, + driver provides a hint to the hardware if software wants + to bias toward performance (0x0) or energy efficiency (0xff) + to the CPPC firmware. then CPPC power algorithm will + calculate the runtime workload and adjust the realtime cores + frequency. + guided + Activate guided autonomous mode. Driver requests minimum and + maximum performance level and the platform autonomously + selects a performance level in this range and appropriate + to the current workload. + amijoy.map= [HW,JOY] Amiga joystick support Map of devices attached to JOY0DAT and JOY1DAT Format: <a>,<b> @@ -7062,20 +7085,3 @@ xmon commands. off xmon is disabled. - amd_pstate= [X86] - disable - Do not enable amd_pstate as the default - scaling driver for the supported processors - passive - Use amd_pstate as a scaling driver, driver requests a - desired performance on this abstract scale and the power - management firmware translates the requests into actual - hardware states (core frequency, data fabric and memory - clocks etc.) - active - Use amd_pstate_epp driver instance as the scaling driver, - driver provides a hint to the hardware if software wants - to bias toward performance (0x0) or energy efficiency (0xff) - to the CPPC firmware. then CPPC power algorithm will - calculate the runtime workload and adjust the realtime cores - frequency. diff --git a/Documentation/admin-guide/pm/amd-pstate.rst b/Documentation/admin-guide/pm/amd-pstate.rst index 6e5298b521b1..1cf40f69278c 100644 --- a/Documentation/admin-guide/pm/amd-pstate.rst +++ b/Documentation/admin-guide/pm/amd-pstate.rst @@ -303,13 +303,18 @@ efficiency frequency management method on AMD processors. AMD Pstate Driver Operation Modes ================================= -``amd_pstate`` CPPC has two operation modes: CPPC Autonomous(active) mode and -CPPC non-autonomous(passive) mode. -active mode and passive mode can be chosen by different kernel parameters. -When in Autonomous mode, CPPC ignores requests done in the Desired Performance -Target register and takes into account only the values set to the Minimum requested -performance, Maximum requested performance, and Energy Performance Preference -registers. When Autonomous is disabled, it only considers the Desired Performance Target. +``amd_pstate`` CPPC has 3 operation modes: autonomous (active) mode, +non-autonomous (passive) mode and guided autonomous (guided) mode. +Active/passive/guided mode can be chosen by different kernel parameters. + +- In autonomous mode, platform ignores the desired performance level request + and takes into account only the values set to the minimum, maximum and energy + performance preference registers. +- In non-autonomous mode, platform gets desired performance level + from OS directly through Desired Performance Register. +- In guided-autonomous mode, platform sets operating performance level + autonomously according to the current workload and within the limits set by + OS through min and max performance registers. Active Mode ------------ @@ -338,6 +343,15 @@ to the Performance Reduction Tolerance register. Above the nominal performance l processor must provide at least nominal performance requested and go higher if current operating conditions allow. +Guided Mode +----------- + +``amd_pstate=guided`` + +If ``amd_pstate=guided`` is passed to kernel command line option then this mode +is activated. In this mode, driver requests minimum and maximum performance +level and the platform autonomously selects a performance level in this range +and appropriate to the current workload. User Space Interface in ``sysfs`` - General =========================================== @@ -358,6 +372,9 @@ control its functionality at the system level. They are located in the "passive" The driver is functional and in the ``passive mode`` + "guided" + The driver is functional and in the ``guided mode`` + "disable" The driver is unregistered and not functional now. diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml index e4aa8c67d532..a6b3bb8fdf33 100644 --- a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml @@ -20,12 +20,20 @@ properties: oneOf: - description: v1 of CPUFREQ HW items: + - enum: + - qcom,qcm2290-cpufreq-hw + - qcom,sc7180-cpufreq-hw + - qcom,sdm845-cpufreq-hw + - qcom,sm6115-cpufreq-hw + - qcom,sm6350-cpufreq-hw + - qcom,sm8150-cpufreq-hw - const: qcom,cpufreq-hw - description: v2 of CPUFREQ HW (EPSS) items: - enum: - qcom,qdu1000-cpufreq-epss + - qcom,sa8775p-cpufreq-epss - qcom,sc7280-cpufreq-epss - qcom,sc8280xp-cpufreq-epss - qcom,sm6375-cpufreq-epss @@ -36,14 +44,14 @@ properties: - const: qcom,cpufreq-epss reg: - minItems: 2 + minItems: 1 items: - description: Frequency domain 0 register region - description: Frequency domain 1 register region - description: Frequency domain 2 register region reg-names: - minItems: 2 + minItems: 1 items: - const: freq-domain0 - const: freq-domain1 @@ -85,6 +93,111 @@ required: additionalProperties: false +allOf: + - if: + properties: + compatible: + contains: + enum: + - qcom,qcm2290-cpufreq-hw + then: + properties: + reg: + minItems: 1 + maxItems: 1 + + reg-names: + minItems: 1 + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 1 + + interrupt-names: + minItems: 1 + + - if: + properties: + compatible: + contains: + enum: + - qcom,qdu1000-cpufreq-epss + - qcom,sc7180-cpufreq-hw + - qcom,sc8280xp-cpufreq-epss + - qcom,sdm845-cpufreq-hw + - qcom,sm6115-cpufreq-hw + - qcom,sm6350-cpufreq-hw + - qcom,sm6375-cpufreq-epss + then: + properties: + reg: + minItems: 2 + maxItems: 2 + + reg-names: + minItems: 2 + maxItems: 2 + + interrupts: + minItems: 2 + maxItems: 2 + + interrupt-names: + minItems: 2 + + - if: + properties: + compatible: + contains: + enum: + - qcom,sc7280-cpufreq-epss + - qcom,sm8250-cpufreq-epss + - qcom,sm8350-cpufreq-epss + - qcom,sm8450-cpufreq-epss + - qcom,sm8550-cpufreq-epss + then: + properties: + reg: + minItems: 3 + maxItems: 3 + + reg-names: + minItems: 3 + maxItems: 3 + + interrupts: + minItems: 3 + maxItems: 3 + + interrupt-names: + minItems: 3 + + - if: + properties: + compatible: + contains: + enum: + - qcom,sm8150-cpufreq-hw + then: + properties: + reg: + minItems: 3 + maxItems: 3 + + reg-names: + minItems: 3 + maxItems: 3 + + # On some SoCs the Prime core shares the LMH irq with Big cores + interrupts: + minItems: 2 + maxItems: 2 + + interrupt-names: + minItems: 2 + + examples: - | #include <dt-bindings/clock/qcom,gcc-sdm845.h> @@ -235,7 +348,7 @@ examples: #size-cells = <1>; cpufreq@17d43000 { - compatible = "qcom,cpufreq-hw"; + compatible = "qcom,sdm845-cpufreq-hw", "qcom,cpufreq-hw"; reg = <0x17d43000 0x1400>, <0x17d45800 0x1400>; reg-names = "freq-domain0", "freq-domain1"; diff --git a/drivers/acpi/cppc_acpi.c b/drivers/acpi/cppc_acpi.c index c51d3ccb4cca..7ff269a78c20 100644 --- a/drivers/acpi/cppc_acpi.c +++ b/drivers/acpi/cppc_acpi.c @@ -1434,6 +1434,102 @@ int cppc_set_epp_perf(int cpu, struct cppc_perf_ctrls *perf_ctrls, bool enable) EXPORT_SYMBOL_GPL(cppc_set_epp_perf); /** + * cppc_get_auto_sel_caps - Read autonomous selection register. + * @cpunum : CPU from which to read register. + * @perf_caps : struct where autonomous selection register value is updated. + */ +int cppc_get_auto_sel_caps(int cpunum, struct cppc_perf_caps *perf_caps) +{ + struct cpc_desc *cpc_desc = per_cpu(cpc_desc_ptr, cpunum); + struct cpc_register_resource *auto_sel_reg; + u64 auto_sel; + + if (!cpc_desc) { + pr_debug("No CPC descriptor for CPU:%d\n", cpunum); + return -ENODEV; + } + + auto_sel_reg = &cpc_desc->cpc_regs[AUTO_SEL_ENABLE]; + + if (!CPC_SUPPORTED(auto_sel_reg)) + pr_warn_once("Autonomous mode is not unsupported!\n"); + + if (CPC_IN_PCC(auto_sel_reg)) { + int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpunum); + struct cppc_pcc_data *pcc_ss_data = NULL; + int ret = 0; + + if (pcc_ss_id < 0) + return -ENODEV; + + pcc_ss_data = pcc_data[pcc_ss_id]; + + down_write(&pcc_ss_data->pcc_lock); + + if (send_pcc_cmd(pcc_ss_id, CMD_READ) >= 0) { + cpc_read(cpunum, auto_sel_reg, &auto_sel); + perf_caps->auto_sel = (bool)auto_sel; + } else { + ret = -EIO; + } + + up_write(&pcc_ss_data->pcc_lock); + + return ret; + } + + return 0; +} +EXPORT_SYMBOL_GPL(cppc_get_auto_sel_caps); + +/** + * cppc_set_auto_sel - Write autonomous selection register. + * @cpu : CPU to which to write register. + * @enable : the desired value of autonomous selection resiter to be updated. + */ +int cppc_set_auto_sel(int cpu, bool enable) +{ + int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpu); + struct cpc_register_resource *auto_sel_reg; + struct cpc_desc *cpc_desc = per_cpu(cpc_desc_ptr, cpu); + struct cppc_pcc_data *pcc_ss_data = NULL; + int ret = -EINVAL; + + if (!cpc_desc) { + pr_debug("No CPC descriptor for CPU:%d\n", cpu); + return -ENODEV; + } + + auto_sel_reg = &cpc_desc->cpc_regs[AUTO_SEL_ENABLE]; + + if (CPC_IN_PCC(auto_sel_reg)) { + if (pcc_ss_id < 0) { + pr_debug("Invalid pcc_ss_id\n"); + return -ENODEV; + } + + if (CPC_SUPPORTED(auto_sel_reg)) { + ret = cpc_write(cpu, auto_sel_reg, enable); + if (ret) + return ret; + } + + pcc_ss_data = pcc_data[pcc_ss_id]; + + down_write(&pcc_ss_data->pcc_lock); + /* after writing CPC, transfer the ownership of PCC to platform */ + ret = send_pcc_cmd(pcc_ss_id, CMD_WRITE); + up_write(&pcc_ss_data->pcc_lock); + } else { + ret = -ENOTSUPP; + pr_debug("_CPC in PCC is not supported\n"); + } + + return ret; +} +EXPORT_SYMBOL_GPL(cppc_set_auto_sel); + +/** * cppc_set_enable - Set to enable CPPC on the processor by writing the * Continuous Performance Control package EnableRegister field. * @cpu: CPU for which to enable CPPC register. @@ -1488,7 +1584,7 @@ EXPORT_SYMBOL_GPL(cppc_set_enable); int cppc_set_perf(int cpu, struct cppc_perf_ctrls *perf_ctrls) { struct cpc_desc *cpc_desc = per_cpu(cpc_desc_ptr, cpu); - struct cpc_register_resource *desired_reg; + struct cpc_register_resource *desired_reg, *min_perf_reg, *max_perf_reg; int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpu); struct cppc_pcc_data *pcc_ss_data = NULL; int ret = 0; @@ -1499,6 +1595,8 @@ int cppc_set_perf(int cpu, struct cppc_perf_ctrls *perf_ctrls) } desired_reg = &cpc_desc->cpc_regs[DESIRED_PERF]; + min_perf_reg = &cpc_desc->cpc_regs[MIN_PERF]; + max_perf_reg = &cpc_desc->cpc_regs[MAX_PERF]; /* * This is Phase-I where we want to write to CPC registers @@ -1507,7 +1605,7 @@ int cppc_set_perf(int cpu, struct cppc_perf_ctrls *perf_ctrls) * Since read_lock can be acquired by multiple CPUs simultaneously we * achieve that goal here */ - if (CPC_IN_PCC(desired_reg)) { + if (CPC_IN_PCC(desired_reg) || CPC_IN_PCC(min_perf_reg) || CPC_IN_PCC(max_perf_reg)) { if (pcc_ss_id < 0) { pr_debug("Invalid pcc_ss_id\n"); return -ENODEV; @@ -1530,13 +1628,19 @@ int cppc_set_perf(int cpu, struct cppc_perf_ctrls *perf_ctrls) cpc_desc->write_cmd_status = 0; } + cpc_write(cpu, desired_reg, perf_ctrls->desired_perf); + /* - * Skip writing MIN/MAX until Linux knows how to come up with - * useful values. + * Only write if min_perf and max_perf not zero. Some drivers pass zero + * value to min and max perf, but they don't mean to set the zero value, + * they just don't want to write to those registers. */ - cpc_write(cpu, desired_reg, perf_ctrls->desired_perf); + if (perf_ctrls->min_perf) + cpc_write(cpu, min_perf_reg, perf_ctrls->min_perf); + if (perf_ctrls->max_perf) + cpc_write(cpu, max_perf_reg, perf_ctrls->max_perf); - if (CPC_IN_PCC(desired_reg)) + if (CPC_IN_PCC(desired_reg) || CPC_IN_PCC(min_perf_reg) || CPC_IN_PCC(max_perf_reg)) up_read(&pcc_ss_data->pcc_lock); /* END Phase-I */ /* * This is Phase-II where we transfer the ownership of PCC to Platform @@ -1584,7 +1688,7 @@ int cppc_set_perf(int cpu, struct cppc_perf_ctrls *perf_ctrls) * case during a CMD_READ and if there are pending writes it delivers * the write command before servicing the read command */ - if (CPC_IN_PCC(desired_reg)) { + if (CPC_IN_PCC(desired_reg) || CPC_IN_PCC(min_perf_reg) || CPC_IN_PCC(max_perf_reg)) { if (down_write_trylock(&pcc_ss_data->pcc_lock)) {/* BEGIN Phase-II */ /* Update only if there are pending write commands */ if (pcc_ss_data->pending_pcc_write_cmd) diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c index c50139207794..f85f3515c258 100644 --- a/drivers/base/power/main.c +++ b/drivers/base/power/main.c @@ -679,7 +679,7 @@ static bool dpm_async_fn(struct device *dev, async_func_t func) static void async_resume_noirq(void *data, async_cookie_t cookie) { - struct device *dev = (struct device *)data; + struct device *dev = data; int error; error = device_resume_noirq(dev, pm_transition, true); @@ -816,7 +816,7 @@ Out: static void async_resume_early(void *data, async_cookie_t cookie) { - struct device *dev = (struct device *)data; + struct device *dev = data; int error; error = device_resume_early(dev, pm_transition, true); @@ -980,7 +980,7 @@ static int device_resume(struct device *dev, pm_message_t state, bool async) static void async_resume(void *data, async_cookie_t cookie) { - struct device *dev = (struct device *)data; + struct device *dev = data; int error; error = device_resume(dev, pm_transition, true); @@ -1269,7 +1269,7 @@ Complete: static void async_suspend_noirq(void *data, async_cookie_t cookie) { - struct device *dev = (struct device *)data; + struct device *dev = data; int error; error = __device_suspend_noirq(dev, pm_transition, true); @@ -1450,7 +1450,7 @@ Complete: static void async_suspend_late(void *data, async_cookie_t cookie) { - struct device *dev = (struct device *)data; + struct device *dev = data; int error; error = __device_suspend_late(dev, pm_transition, true); @@ -1727,7 +1727,7 @@ static int __device_suspend(struct device *dev, pm_message_t state, bool async) static void async_suspend(void *data, async_cookie_t cookie) { - struct device *dev = (struct device *)data; + struct device *dev = data; int error; error = __device_suspend(dev, pm_transition, true); diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm index 97acaa2136fd..123b4bbfcfee 100644 --- a/drivers/cpufreq/Kconfig.arm +++ b/drivers/cpufreq/Kconfig.arm @@ -95,7 +95,7 @@ config ARM_BRCMSTB_AVS_CPUFREQ help Some Broadcom STB SoCs use a co-processor running proprietary firmware ("AVS") to handle voltage and frequency scaling. This driver provides - a standard CPUfreq interface to to the firmware. + a standard CPUfreq interface to the firmware. Say Y, if you have a Broadcom SoC with AVS support for DFS or DVFS. diff --git a/drivers/cpufreq/amd-pstate.c b/drivers/cpufreq/amd-pstate.c index 8dd46fad151e..fcb54a6f6598 100644 --- a/drivers/cpufreq/amd-pstate.c +++ b/drivers/cpufreq/amd-pstate.c @@ -106,6 +106,8 @@ static unsigned int epp_values[] = { [EPP_INDEX_POWERSAVE] = AMD_CPPC_EPP_POWERSAVE, }; +typedef int (*cppc_mode_transition_fn)(int); + static inline int get_mode_idx_from_str(const char *str, size_t size) { int i; @@ -308,7 +310,22 @@ static int cppc_init_perf(struct amd_cpudata *cpudata) cppc_perf.lowest_nonlinear_perf); WRITE_ONCE(cpudata->lowest_perf, cppc_perf.lowest_perf); - return 0; + if (cppc_state == AMD_PSTATE_ACTIVE) + return 0; + + ret = cppc_get_auto_sel_caps(cpudata->cpu, &cppc_perf); + if (ret) { + pr_warn("failed to get auto_sel, ret: %d\n", ret); + return 0; + } + + ret = cppc_set_auto_sel(cpudata->cpu, + (cppc_state == AMD_PSTATE_PASSIVE) ? 0 : 1); + + if (ret) + pr_warn("failed to set auto_sel, ret: %d\n", ret); + + return ret; } DEFINE_STATIC_CALL(amd_pstate_init_perf, pstate_init_perf); @@ -385,12 +402,18 @@ static inline bool amd_pstate_sample(struct amd_cpudata *cpudata) } static void amd_pstate_update(struct amd_cpudata *cpudata, u32 min_perf, - u32 des_perf, u32 max_perf, bool fast_switch) + u32 des_perf, u32 max_perf, bool fast_switch, int gov_flags) { u64 prev = READ_ONCE(cpudata->cppc_req_cached); u64 value = prev; des_perf = clamp_t(unsigned long, des_perf, min_perf, max_perf); + + if ((cppc_state == AMD_PSTATE_GUIDED) && (gov_flags & CPUFREQ_GOV_DYNAMIC_SWITCHING)) { + min_perf = des_perf; + des_perf = 0; + } + value &= ~AMD_CPPC_MIN_PERF(~0L); value |= AMD_CPPC_MIN_PERF(min_perf); @@ -445,7 +468,7 @@ static int amd_pstate_target(struct cpufreq_policy *policy, cpufreq_freq_transition_begin(policy, &freqs); amd_pstate_update(cpudata, min_perf, des_perf, - max_perf, false); + max_perf, false, policy->governor->flags); cpufreq_freq_transition_end(policy, &freqs, false); return 0; @@ -479,7 +502,8 @@ static void amd_pstate_adjust_perf(unsigned int cpu, if (max_perf < min_perf) max_perf = min_perf; - amd_pstate_update(cpudata, min_perf, des_perf, max_perf, true); + amd_pstate_update(cpudata, min_perf, des_perf, max_perf, true, + policy->governor->flags); cpufreq_cpu_put(policy); } @@ -816,6 +840,98 @@ static ssize_t show_energy_performance_preference( return sysfs_emit(buf, "%s\n", energy_perf_strings[preference]); } +static void amd_pstate_driver_cleanup(void) +{ + amd_pstate_enable(false); + cppc_state = AMD_PSTATE_DISABLE; + current_pstate_driver = NULL; +} + +static int amd_pstate_register_driver(int mode) +{ + int ret; + + if (mode == AMD_PSTATE_PASSIVE || mode == AMD_PSTATE_GUIDED) + current_pstate_driver = &amd_pstate_driver; + else if (mode == AMD_PSTATE_ACTIVE) + current_pstate_driver = &amd_pstate_epp_driver; + else + return -EINVAL; + + cppc_state = mode; + ret = cpufreq_register_driver(current_pstate_driver); + if (ret) { + amd_pstate_driver_cleanup(); + return ret; + } + return 0; +} + +static int amd_pstate_unregister_driver(int dummy) +{ + cpufreq_unregister_driver(current_pstate_driver); + amd_pstate_driver_cleanup(); + return 0; +} + +static int amd_pstate_change_mode_without_dvr_change(int mode) +{ + int cpu = 0; + + cppc_state = mode; + + if (boot_cpu_has(X86_FEATURE_CPPC) || cppc_state == AMD_PSTATE_ACTIVE) + return 0; + + for_each_present_cpu(cpu) { + cppc_set_auto_sel(cpu, (cppc_state == AMD_PSTATE_PASSIVE) ? 0 : 1); + } + + return 0; +} + +static int amd_pstate_change_driver_mode(int mode) +{ + int ret; + + ret = amd_pstate_unregister_driver(0); + if (ret) + return ret; + + ret = amd_pstate_register_driver(mode); + if (ret) + return ret; + + return 0; +} + +static cppc_mode_transition_fn mode_state_machine[AMD_PSTATE_MAX][AMD_PSTATE_MAX] = { + [AMD_PSTATE_DISABLE] = { + [AMD_PSTATE_DISABLE] = NULL, + [AMD_PSTATE_PASSIVE] = amd_pstate_register_driver, + [AMD_PSTATE_ACTIVE] = amd_pstate_register_driver, + [AMD_PSTATE_GUIDED] = amd_pstate_register_driver, + }, + [AMD_PSTATE_PASSIVE] = { + [AMD_PSTATE_DISABLE] = amd_pstate_unregister_driver, + [AMD_PSTATE_PASSIVE] = NULL, + [AMD_PSTATE_ACTIVE] = amd_pstate_change_driver_mode, + [AMD_PSTATE_GUIDED] = amd_pstate_change_mode_without_dvr_change, + }, + [AMD_PSTATE_ACTIVE] = { + [AMD_PSTATE_DISABLE] = amd_pstate_unregister_driver, + [AMD_PSTATE_PASSIVE] = amd_pstate_change_driver_mode, + [AMD_PSTATE_ACTIVE] = NULL, + [AMD_PSTATE_GUIDED] = amd_pstate_change_driver_mode, + }, + [AMD_PSTATE_GUIDED] = { + [AMD_PSTATE_DISABLE] = amd_pstate_unregister_driver, + [AMD_PSTATE_PASSIVE] = amd_pstate_change_mode_without_dvr_change, + [AMD_PSTATE_ACTIVE] = amd_pstate_change_driver_mode, + [AMD_PSTATE_GUIDED] = NULL, + }, +}; + static ssize_t amd_pstate_show_status(char *buf) { if (!current_pstate_driver) @@ -824,55 +940,22 @@ static ssize_t amd_pstate_show_status(char *buf) return sysfs_emit(buf, "%s\n", amd_pstate_mode_string[cppc_state]); |