diff options
58 files changed, 2896 insertions, 677 deletions
diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt index c733e28e18e5..764c738bb3ba 100644 --- a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt +++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt @@ -167,6 +167,23 @@ Example: }; ----------------------------------------------------------------------- +Hisilicon HiP05 PCIe-SAS system controller + +Required properties: +- compatible : "hisilicon,pcie-sas-subctrl", "syscon"; +- reg : Register address and size + +The HiP05 PCIe-SAS system controller is shared by PCIe and SAS controllers in +HiP05 Soc to implement some basic configurations. + +Example: + /* for HiP05 PCIe-SAS system */ + pcie_sas: system_controller@0xb0000000 { + compatible = "hisilicon,pcie-sas-subctrl", "syscon"; + reg = <0xb0000000 0x10000>; + }; + +----------------------------------------------------------------------- Hisilicon CPU controller Required properties: diff --git a/Documentation/devicetree/bindings/pci/altera-pcie-msi.txt b/Documentation/devicetree/bindings/pci/altera-pcie-msi.txt new file mode 100644 index 000000000000..09cd3bc4d038 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/altera-pcie-msi.txt @@ -0,0 +1,28 @@ +* Altera PCIe MSI controller + +Required properties: +- compatible: should contain "altr,msi-1.0" +- reg: specifies the physical base address of the controller and + the length of the memory mapped region. +- reg-names: must include the following entries: + "csr": CSR registers + "vector_slave": vectors slave port region +- interrupt-parent: interrupt source phandle. +- interrupts: specifies the interrupt source of the parent interrupt + controller. The format of the interrupt specifier depends on the + parent interrupt controller. +- num-vectors: number of vectors, range 1 to 32. +- msi-controller: indicates that this is MSI controller node + + +Example +msi0: msi@0xFF200000 { + compatible = "altr,msi-1.0"; + reg = <0xFF200000 0x00000010 + 0xFF200010 0x00000080>; + reg-names = "csr", "vector_slave"; + interrupt-parent = <&hps_0_arm_gic_0>; + interrupts = <0 42 4>; + msi-controller; + num-vectors = <32>; +}; diff --git a/Documentation/devicetree/bindings/pci/altera-pcie.txt b/Documentation/devicetree/bindings/pci/altera-pcie.txt new file mode 100644 index 000000000000..2951a6a50704 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/altera-pcie.txt @@ -0,0 +1,49 @@ +* Altera PCIe controller + +Required properties: +- compatible : should contain "altr,pcie-root-port-1.0" +- reg: a list of physical base address and length for TXS and CRA. +- reg-names: must include the following entries: + "Txs": TX slave port region + "Cra": Control register access region +- interrupt-parent: interrupt source phandle. +- interrupts: specifies the interrupt source of the parent interrupt controller. + The format of the interrupt specifier depends on the parent interrupt + controller. +- device_type: must be "pci" +- #address-cells: set to <3> +- #size-cells: set to <2> +- #interrupt-cells: set to <1> +- ranges: describes the translation of addresses for root ports and standard + PCI regions. +- interrupt-map-mask and interrupt-map: standard PCI properties to define the + mapping of the PCIe interface to interrupt numbers. + +Optional properties: +- msi-parent: Link to the hardware entity that serves as the MSI controller for this PCIe + controller. +- bus-range: PCI bus numbers covered + +Example + pcie_0: pcie@0xc00000000 { + compatible = "altr,pcie-root-port-1.0"; + reg = <0xc0000000 0x20000000>, + <0xff220000 0x00004000>; + reg-names = "Txs", "Cra"; + interrupt-parent = <&hps_0_arm_gic_0>; + interrupts = <0 40 4>; + interrupt-controller; + #interrupt-cells = <1>; + bus-range = <0x0 0xFF>; + device_type = "pci"; + msi-parent = <&msi_to_gic_gen_0>; + #address-cells = <3>; + #size-cells = <2>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_0 1>, + <0 0 0 2 &pcie_0 2>, + <0 0 0 3 &pcie_0 3>, + <0 0 0 4 &pcie_0 4>; + ranges = <0x82000000 0x00000000 0x00000000 0xc0000000 0x00000000 0x10000000 + 0x82000000 0x00000000 0x10000000 0xd0000000 0x00000000 0x10000000>; + }; diff --git a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt index f7ce50e38ed4..45c2a8094a9f 100644 --- a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt +++ b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt @@ -17,6 +17,21 @@ Optional properties: - phys: phandle of the PCIe PHY device - phy-names: must be "pcie-phy" +- brcm,pcie-ob: Some iProc SoCs do not have the outbound address mapping done +by the ASIC after power on reset. In this case, SW needs to configure it + +If the brcm,pcie-ob property is present, the following properties become +effective: + +Required: +- brcm,pcie-ob-axi-offset: The offset from the AXI address to the internal +address used by the iProc PCIe core (not the PCIe address) +- brcm,pcie-ob-window-size: The outbound address mapping window size (in MB) + +Optional: +- brcm,pcie-ob-oarr-size: Some iProc SoCs need the OARR size bit to be set to +increase the outbound window size + Example: pcie0: pcie@18012000 { compatible = "brcm,iproc-pcie"; @@ -38,6 +53,11 @@ Example: phys = <&phy 0 5>; phy-names = "pcie-phy"; + + brcm,pcie-ob; + brcm,pcie-ob-oarr-size; + brcm,pcie-ob-axi-offset = <0x00000000>; + brcm,pcie-ob-window-size = <256>; }; pcie1: pcie@18013000 { diff --git a/Documentation/devicetree/bindings/pci/designware-pcie.txt b/Documentation/devicetree/bindings/pci/designware-pcie.txt index 9f4faa8e8d00..5b0853df9d5a 100644 --- a/Documentation/devicetree/bindings/pci/designware-pcie.txt +++ b/Documentation/devicetree/bindings/pci/designware-pcie.txt @@ -15,14 +15,16 @@ Required properties: to define the mapping of the PCIe interface to interrupt numbers. - num-lanes: number of lanes to use -- clocks: Must contain an entry for each entry in clock-names. - See ../clocks/clock-bindings.txt for details. -- clock-names: Must include the following entries: - - "pcie" - - "pcie_bus" Optional properties: +- num-lanes: number of lanes to use (this property should be specified unless + the link is brought already up in BIOS) - reset-gpio: gpio pin number of power good signal - bus-range: PCI bus numbers covered (it is recommended for new devicetrees to specify this property, to keep backwards compatibility a range of 0x00-0xff is assumed if not present) +- clocks: Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. +- clock-names: Must include the following entries: + - "pcie" + - "pcie_bus" diff --git a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt new file mode 100644 index 000000000000..17c6ed9c6059 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt @@ -0,0 +1,44 @@ +HiSilicon PCIe host bridge DT description + +HiSilicon PCIe host controller is based on Designware PCI core. +It shares common functions with PCIe Designware core driver and inherits +common properties defined in +Documentation/devicetree/bindings/pci/designware-pci.txt. + +Additional properties are described here: + +Required properties: +- compatible: Should contain "hisilicon,hip05-pcie". +- reg: Should contain rc_dbi, config registers location and length. +- reg-names: Must include the following entries: + "rc_dbi": controller configuration registers; + "config": PCIe configuration space registers. +- msi-parent: Should be its_pcie which is an ITS receiving MSI interrupts. +- port-id: Should be 0, 1, 2 or 3. + +Optional properties: +- status: Either "ok" or "disabled". +- dma-coherent: Present if DMA operations are coherent. + +Example: + pcie@0xb0080000 { + compatible = "hisilicon,hip05-pcie", "snps,dw-pcie"; + reg = <0 0xb0080000 0 0x10000>, <0x220 0x00000000 0 0x2000>; + reg-names = "rc_dbi", "config"; + bus-range = <0 15>; + msi-parent = <&its_pcie>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + dma-coherent; + ranges = <0x82000000 0 0x00000000 0x220 0x00000000 0 0x10000000>; + num-lanes = <8>; + port-id = <1>; + #interrupts-cells = <1>; + interrupts-map-mask = <0xf800 0 0 7>; + interrupts-map = <0x0 0 0 1 &mbigen_pcie 1 10 + 0x0 0 0 2 &mbigen_pcie 2 11 + 0x0 0 0 3 &mbigen_pcie 3 12 + 0x0 0 0 4 &mbigen_pcie 4 13>; + status = "ok"; + }; diff --git a/Documentation/devicetree/bindings/pci/host-generic-pci.txt b/Documentation/devicetree/bindings/pci/host-generic-pci.txt index cf3e205e0b7e..3f1d3fca62bb 100644 --- a/Documentation/devicetree/bindings/pci/host-generic-pci.txt +++ b/Documentation/devicetree/bindings/pci/host-generic-pci.txt @@ -34,8 +34,9 @@ Properties of the host controller node: - #size-cells : Must be 2. - reg : The Configuration Space base address and size, as accessed - from the parent bus. - + from the parent bus. The base address corresponds to + the first bus in the "bus-range" property. If no + "bus-range" is specified, this will be bus 0 (the default). Properties of the /chosen node: diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt b/Documentation/devicetree/bindings/pci/layerscape-pci.txt index 6286f049bf18..e3767857d30d 100644 --- a/Documentation/devicetree/bindings/pci/layerscape-pci.txt +++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt @@ -1,10 +1,20 @@ Freescale Layerscape PCIe controller -This PCIe host controller is based on the Synopsis Designware PCIe IP +This PCIe host controller is based on the Synopsys DesignWare PCIe IP and thus inherits all the common properties defined in designware-pcie.txt. +This controller derives its clocks from the Reset Configuration Word (RCW) +which is used to describe the PLL settings at the time of chip-reset. + +Also as per the available Reference Manuals, there is no specific 'version' +register available in the Freescale PCIe controller register set, +which can allow determining the underlying DesignWare PCIe controller version +information. + Required properties: -- compatible: should contain the platform identifier such as "fsl,ls1021a-pcie" +- compatible: should contain the platform identifier such as: + "fsl,ls1021a-pcie", "snps,dw-pcie" + "fsl,ls2080a-pcie", "snps,dw-pcie" - reg: base addresses and lengths of the PCIe controller - interrupts: A list of interrupt outputs of the controller. Must contain an entry for each entry in the interrupt-names property. diff --git a/MAINTAINERS b/MAINTAINERS index 4e65fdf92347..d5506eca7fb2 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -8063,6 +8063,14 @@ F: include/linux/pci* F: arch/x86/pci/ F: arch/x86/kernel/quirks.c +PCI DRIVER FOR ALTERA PCIE IP +M: Ley Foon Tan <lftan@altera.com> +L: rfi@lists.rocketboards.org (moderated for non-subscribers) +L: linux-pci@vger.kernel.org +S: Supported +F: Documentation/devicetree/bindings/pci/altera-pcie.txt +F: drivers/pci/host/pcie-altera.c + PCI DRIVER FOR ARM VERSATILE PLATFORM M: Rob Herring <robh@kernel.org> L: linux-pci@vger.kernel.org @@ -8164,6 +8172,14 @@ L: linux-pci@vger.kernel.org S: Maintained F: drivers/pci/host/*spear* +PCI MSI DRIVER FOR ALTERA MSI IP +M: Ley Foon Tan <lftan@altera.com> +L: rfi@lists.rocketboards.org (moderated for non-subscribers) +L: linux-pci@vger.kernel.org +S: Supported +F: Documentation/devicetree/bindings/pci/altera-pcie-msi.txt +F: drivers/pci/host/pcie-altera-msi.c + PCI MSI DRIVER FOR APPLIEDMICRO XGENE M: Duc Dang <dhdang@apm.com> L: linux-pci@vger.kernel.org @@ -8172,6 +8188,13 @@ S: Maintained F: Documentation/devicetree/bindings/pci/xgene-pci-msi.txt F: drivers/pci/host/pci-xgene-msi.c +PCIE DRIVER FOR HISILICON +M: Zhou Wang <wangzhou1@hisilicon.com> +L: linux-pci@vger.kernel.org +S: Maintained +F: Documentation/devicetree/bindings/pci/hisilicon-pcie.txt +F: drivers/pci/host/pcie-hisi.c + PCMCIA SUBSYSTEM P: Linux PCMCIA Team L: linux-pcmcia@lists.infradead.org diff --git a/arch/arm/include/asm/Kbuild b/arch/arm/include/asm/Kbuild index be648eb47cd9..bd425302c97a 100644 --- a/arch/arm/include/asm/Kbuild +++ b/arch/arm/include/asm/Kbuild @@ -14,6 +14,7 @@ generic-y += local.h generic-y += local64.h generic-y += mm-arch-hooks.h generic-y += msgbuf.h +generic-y += msi.h generic-y += param.h generic-y += parport.h generic-y += poll.h diff --git a/arch/arm/include/asm/mach/pci.h b/arch/arm/include/asm/mach/pci.h index 8857d2869a5f..0070e8520cd4 100644 --- a/arch/arm/include/asm/mach/pci.h +++ b/arch/arm/include/asm/mach/pci.h @@ -52,12 +52,6 @@ struct pci_sys_data { u8 (*swizzle)(struct pci_dev *, u8 *); /* IRQ mapping */ int (*map_irq)(const struct pci_dev *, u8, u8); - /* Resource alignement requirements */ - resource_size_t (*align_resource)(struct pci_dev *dev, - const struct resource *res, - resource_size_t start, - resource_size_t size, - resource_size_t align); void *private_data; /* platform controller private data */ }; diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c index 874e1823f803..6551d28c27e6 100644 --- a/arch/arm/kernel/bios32.c +++ b/arch/arm/kernel/bios32.c @@ -17,6 +17,11 @@ #include <asm/mach/pci.h> static int debug_pci; +static resource_size_t (*align_resource)(struct pci_dev *dev, + const struct resource *res, + resource_size_t start, + resource_size_t size, + resource_size_t align) = NULL; /* * We can't use pci_get_device() here since we are @@ -456,7 +461,7 @@ static void pcibios_init_hw(struct device *parent, struct hw_pci *hw, sys->busnr = busnr; sys->swizzle = hw->swizzle; sys->map_irq = hw->map_irq; - sys->align_resource = hw->align_resource; + align_resource = hw->align_resource; INIT_LIST_HEAD(&sys->resources); if (hw->private_data) @@ -572,7 +577,6 @@ resource_size_t pcibios_align_resource(void *data, const struct resource *res, resource_size_t size, resource_size_t align) { struct pci_dev *dev = data; - struct pci_sys_data *sys = dev->sysdata; resource_size_t start = res->start; if (res->flags & IORESOURCE_IO && start & 0x300) @@ -580,8 +584,8 @@ resource_size_t pcibios_align_resource(void *data, const struct resource *res, start = (start + align - 1) & ~(align - 1); - if (sys->align_resource) - return sys->align_resource(dev, res, start, size, align); + if (align_resource) + return align_resource(dev, res, start, size, align); return start; } diff --git a/arch/arm64/boot/dts/amd/amd-overdrive.dts b/arch/arm64/boot/dts/amd/amd-overdrive.dts index 564a3f7df71d..128fa942f09e 100644 --- a/arch/arm64/boot/dts/amd/amd-overdrive.dts +++ b/arch/arm64/boot/dts/amd/amd-overdrive.dts @@ -14,7 +14,6 @@ chosen { stdout-path = &serial0; - linux,pci-probe-only; }; }; diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index 9e524c26db14..36df46eaba24 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -40,6 +40,7 @@ #include <linux/seq_file.h> #include <linux/root_dev.h> #include <linux/of.h> +#include <linux/of_pci.h> #include <linux/kexec.h> #include <asm/mmu.h> @@ -495,18 +496,7 @@ static void __init find_and_init_phbs(void) * PCI_PROBE_ONLY and PCI_REASSIGN_ALL_BUS can be set via properties * in chosen. */ - if (of_chosen) { - const int *prop; - - prop = of_get_property(of_chosen, - "linux,pci-probe-only", NULL); - if (prop) { - if (*prop) - pci_add_flags(PCI_PROBE_ONLY); - else - pci_clear_flags(PCI_PROBE_ONLY); - } - } + of_pci_check_probe_only(); } static void __init pSeries_setup_arch(void) diff --git a/arch/sparc/kernel/pci.c b/arch/sparc/kernel/pci.c index b91d7f146175..badf0951d73c 100644 --- a/arch/sparc/kernel/pci.c +++ b/arch/sparc/kernel/pci.c @@ -185,8 +185,10 @@ static unsigned long pci_parse_of_flags(u32 addr0) if (addr0 & 0x02000000) { flags = IORESOURCE_MEM | PCI_BASE_ADDRESS_SPACE_MEMORY; - flags |= (addr0 >> 22) & PCI_BASE_ADDRESS_MEM_TYPE_64; flags |= (addr0 >> 28) & PCI_BASE_ADDRESS_MEM_TYPE_1M; + if (addr0 & 0x01000000) + flags |= IORESOURCE_MEM_64 + | PCI_BASE_ADDRESS_MEM_TYPE_64; if (addr0 & 0x40000000) flags |= IORESOURCE_PREFETCH | PCI_BASE_ADDRESS_MEM_PREFETCH; @@ -655,6 +657,9 @@ struct pci_bus *pci_scan_one_pbm(struct pci_pbm_info *pbm, pbm->io_space.start); pci_add_resource_offset(&resources, &pbm->mem_space, pbm->mem_space.start); + if (pbm->mem64_space.flags) + pci_add_resource_offset(&resources, &pbm->mem64_space, + pbm->mem_space.start); pbm->busn.start = pbm->pci_first_busno; pbm->busn.end = pbm->pci_last_busno; pbm->busn.flags = IORESOURCE_BUS; diff --git a/arch/sparc/kernel/pci_common.c b/arch/sparc/kernel/pci_common.c index 944a06536ecc..33524c1d5328 100644 --- a/arch/sparc/kernel/pci_common.c +++ b/arch/sparc/kernel/pci_common.c @@ -406,6 +406,7 @@ void pci_determine_mem_io_space(struct pci_pbm_info *pbm) } num_pbm_ranges = i / sizeof(*pbm_ranges); + memset(&pbm->mem64_space, 0, sizeof(struct resource)); for (i = 0; i < num_pbm_ranges; i++) { const struct linux_prom_pci_ranges *pr = &pbm_ranges[i]; @@ -451,7 +452,12 @@ void pci_determine_mem_io_space(struct pci_pbm_info *pbm) break; case 3: - /* XXX 64-bit MEM handling XXX */ + /* 64-bit MEM handling */ + pbm->mem64_space.start = a; + pbm->mem64_space.end = a + size - 1UL; + pbm->mem64_space.flags = IORESOURCE_MEM; + saw_mem = 1; + break; default: break; @@ -465,15 +471,22 @@ void pci_determine_mem_io_space(struct pci_pbm_info *pbm) prom_halt(); } - printk("%s: PCI IO[%llx] MEM[%llx]\n", + printk("%s: PCI IO[%llx] MEM[%llx]", pbm->name, pbm->io_space.start, pbm->mem_space.start); + if (pbm->mem64_space.flags) + printk(" MEM64[%llx]", + pbm->mem64_space.start); + printk("\n"); pbm->io_space.name = pbm->mem_space.name = pbm->name; + pbm->mem64_space.name = pbm->name; request_resource(&ioport_resource, &pbm->io_space); request_resource(&iomem_resource, &pbm->mem_space); + if (pbm->mem64_space.flags) + request_resource(&iomem_resource, &pbm->mem64_space); |