diff options
63 files changed, 1932 insertions, 736 deletions
diff --git a/Documentation/devicetree/bindings/pci/designware-pcie.txt b/Documentation/devicetree/bindings/pci/designware-pcie.txt index c124f9bc11f3..5561a1c060d0 100644 --- a/Documentation/devicetree/bindings/pci/designware-pcie.txt +++ b/Documentation/devicetree/bindings/pci/designware-pcie.txt @@ -4,8 +4,11 @@ Required properties: - compatible: "snps,dw-pcie" for RC mode; "snps,dw-pcie-ep" for EP mode; -- reg: Should contain the configuration address space. -- reg-names: Must be "config" for the PCIe configuration space. +- reg: For designware cores version < 4.80 contains the configuration + address space. For designware core version >= 4.80, contains + the configuration and ATU address space +- reg-names: Must be "config" for the PCIe configuration space and "atu" for + the ATU address space. (The old way of getting the configuration address space from "ranges" is deprecated and should be avoided.) - num-lanes: number of lanes to use diff --git a/Documentation/devicetree/bindings/pci/pci-keystone.txt b/Documentation/devicetree/bindings/pci/pci-keystone.txt index 2030ee0dc4f9..47202a2938f2 100644 --- a/Documentation/devicetree/bindings/pci/pci-keystone.txt +++ b/Documentation/devicetree/bindings/pci/pci-keystone.txt @@ -11,16 +11,24 @@ described here as well as properties that are not applicable. Required Properties:- -compatibility: "ti,keystone-pcie" -reg: index 1 is the base address and length of DW application registers. - index 2 is the base address and length of PCI device ID register. +compatibility: Should be "ti,keystone-pcie" for RC on Keystone2 SoC + Should be "ti,am654-pcie-rc" for RC on AM654x SoC +reg: Three register ranges as listed in the reg-names property +reg-names: "dbics" for the DesignWare PCIe registers, "app" for the + TI specific application registers, "config" for the + configuration space address pcie_msi_intc : Interrupt controller device node for MSI IRQ chip interrupt-cells: should be set to 1 interrupts: GIC interrupt lines connected to PCI MSI interrupt lines + (required if the compatible is "ti,keystone-pcie") +msi-map: As specified in Documentation/devicetree/bindings/pci/pci-msi.txt + (required if the compatible is "ti,am654-pcie-rc". ti,syscon-pcie-id : phandle to the device control module required to set device id and vendor id. +ti,syscon-pcie-mode : phandle to the device control module required to configure + PCI in either RC mode or EP mode. Example: pcie_msi_intc: msi-interrupt-controller { @@ -61,3 +69,47 @@ Optional properties:- DesignWare DT Properties not applicable for Keystone PCI 1. pcie_bus clock-names not used. Instead, a phandle to phys is used. + +AM654 PCIe Endpoint +=================== + +Required Properties:- + +compatibility: Should be "ti,am654-pcie-ep" for EP on AM654x SoC +reg: Four register ranges as listed in the reg-names property +reg-names: "dbics" for the DesignWare PCIe registers, "app" for the + TI specific application registers, "atu" for the + Address Translation Unit configuration registers and + "addr_space" used to map remote RC address space +num-ib-windows: As specified in + Documentation/devicetree/bindings/pci/designware-pcie.txt +num-ob-windows: As specified in + Documentation/devicetree/bindings/pci/designware-pcie.txt +num-lanes: As specified in + Documentation/devicetree/bindings/pci/designware-pcie.txt +power-domains: As documented by the generic PM domain bindings in + Documentation/devicetree/bindings/power/power_domain.txt. +ti,syscon-pcie-mode: phandle to the device control module required to configure + PCI in either RC mode or EP mode. + +Optional properties:- + +phys: list of PHY specifiers (used by generic PHY framework) +phy-names: must be "pcie-phy0", "pcie-phy1", "pcie-phyN".. based on the + number of lanes as specified in *num-lanes* property. +("phys" and "phy-names" DT bindings are specified in +Documentation/devicetree/bindings/phy/phy-bindings.txt) +interrupts: platform interrupt for error interrupts. + +pcie-ep { + compatible = "ti,am654-pcie-ep"; + reg = <0x5500000 0x1000>, <0x5501000 0x1000>, + <0x10000000 0x8000000>, <0x5506000 0x1000>; + reg-names = "app", "dbics", "addr_space", "atu"; + power-domains = <&k3_pds 120>; + ti,syscon-pcie-mode = <&pcie0_mode>; + num-lanes = <1>; + num-ib-windows = <16>; + num-ob-windows = <16>; + interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>; +}; diff --git a/Documentation/devicetree/bindings/pci/pci.txt b/Documentation/devicetree/bindings/pci/pci.txt index c77981c5dd18..92c01db610df 100644 --- a/Documentation/devicetree/bindings/pci/pci.txt +++ b/Documentation/devicetree/bindings/pci/pci.txt @@ -24,3 +24,53 @@ driver implementation may support the following properties: unsupported link speed, for instance, trying to do training for unsupported link speed, etc. Must be '4' for gen4, '3' for gen3, '2' for gen2, and '1' for gen1. Any other values are invalid. + +PCI-PCI Bridge properties +------------------------- + +PCIe root ports and switch ports may be described explicitly in the device +tree, as children of the host bridge node. Even though those devices are +discoverable by probing, it might be necessary to describe properties that +aren't provided by standard PCIe capabilities. + +Required properties: + +- reg: + Identifies the PCI-PCI bridge. As defined in the IEEE Std 1275-1994 + document, it is a five-cell address encoded as (phys.hi phys.mid + phys.lo size.hi size.lo). phys.hi should contain the device's BDF as + 0b00000000 bbbbbbbb dddddfff 00000000. The other cells should be zero. + + The bus number is defined by firmware, through the standard bridge + configuration mechanism. If this port is a switch port, then firmware + allocates the bus number and writes it into the Secondary Bus Number + register of the bridge directly above this port. Otherwise, the bus + number of a root port is the first number in the bus-range property, + defaulting to zero. + + If firmware leaves the ARI Forwarding Enable bit set in the bridge + above this port, then phys.hi contains the 8-bit function number as + 0b00000000 bbbbbbbb ffffffff 00000000. Note that the PCIe specification + recommends that firmware only leaves ARI enabled when it knows that the + OS is ARI-aware. + +Optional properties: + +- external-facing: + When present, the port is external-facing. All bridges and endpoints + downstream of this port are external to the machine. The OS can, for + example, use this information to identify devices that cannot be + trusted with relaxed DMA protection, as users could easily attach + malicious devices to this port. + +Example: + +pcie@10000000 { + compatible = "pci-host-ecam-generic"; + ... + pcie@0008 { + /* Root port 00:01.0 is external-facing */ + reg = <0x00000800 0 0 0 0>; + external-facing; + }; +}; diff --git a/MAINTAINERS b/MAINTAINERS index e17ebf70b548..b3d64a7daae8 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -11880,7 +11880,8 @@ F: include/linux/switchtec.h F: drivers/ntb/hw/mscc/ PCI DRIVER FOR MOBIVEIL PCIE IP -M: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in> +M: Karthikeyan Mitran <m.karthikeyan@mobiveil.co.in> +M: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> L: linux-pci@vger.kernel.org S: Supported F: Documentation/devicetree/bindings/pci/mobiveil-pcie.txt @@ -12014,6 +12015,12 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/lpieralisi/pci.git/ S: Supported F: drivers/pci/controller/ +PCIE DRIVER FOR ANNAPURNA LABS +M: Jonathan Chocron <jonnyc@amazon.com> +L: linux-pci@vger.kernel.org +S: Maintained +F: drivers/pci/controller/dwc/pcie-al.c + PCIE DRIVER FOR AMLOGIC MESON M: Yue Wang <yue.wang@Amlogic.com> L: linux-pci@vger.kernel.org diff --git a/arch/powerpc/platforms/powernv/npu-dma.c b/arch/powerpc/platforms/powernv/npu-dma.c index dc23d9d2a7d9..495550432f3d 100644 --- a/arch/powerpc/platforms/powernv/npu-dma.c +++ b/arch/powerpc/platforms/powernv/npu-dma.c @@ -1213,9 +1213,8 @@ int pnv_npu2_map_lpar_dev(struct pci_dev *gpdev, unsigned int lparid, * Currently we only support radix and non-zero LPCR only makes sense * for hash tables so skiboot expects the LPCR parameter to be a zero. */ - ret = opal_npu_map_lpar(nphb->opal_id, - PCI_DEVID(gpdev->bus->number, gpdev->devfn), lparid, - 0 /* LPCR bits */); + ret = opal_npu_map_lpar(nphb->opal_id, pci_dev_id(gpdev), lparid, + 0 /* LPCR bits */); if (ret) { dev_err(&gpdev->dev, "Error %d mapping device to LPAR\n", ret); return ret; @@ -1224,7 +1223,7 @@ int pnv_npu2_map_lpar_dev(struct pci_dev *gpdev, unsigned int lparid, dev_dbg(&gpdev->dev, "init context opalid=%llu msr=%lx\n", nphb->opal_id, msr); ret = opal_npu_init_context(nphb->opal_id, 0/*__unused*/, msr, - PCI_DEVID(gpdev->bus->number, gpdev->devfn)); + pci_dev_id(gpdev)); if (ret < 0) dev_err(&gpdev->dev, "Failed to init context: %d\n", ret); else @@ -1258,7 +1257,7 @@ int pnv_npu2_unmap_lpar_dev(struct pci_dev *gpdev) dev_dbg(&gpdev->dev, "destroy context opalid=%llu\n", nphb->opal_id); ret = opal_npu_destroy_context(nphb->opal_id, 0/*__unused*/, - PCI_DEVID(gpdev->bus->number, gpdev->devfn)); + pci_dev_id(gpdev)); if (ret < 0) { dev_err(&gpdev->dev, "Failed to destroy context: %d\n", ret); return ret; @@ -1266,9 +1265,8 @@ int pnv_npu2_unmap_lpar_dev(struct pci_dev *gpdev) /* Set LPID to 0 anyway, just to be safe */ dev_dbg(&gpdev->dev, "Map LPAR opalid=%llu lparid=0\n", nphb->opal_id); - ret = opal_npu_map_lpar(nphb->opal_id, - PCI_DEVID(gpdev->bus->number, gpdev->devfn), 0 /*LPID*/, - 0 /* LPCR bits */); + ret = opal_npu_map_lpar(nphb->opal_id, pci_dev_id(gpdev), 0 /*LPID*/, + 0 /* LPCR bits */); if (ret) dev_err(&gpdev->dev, "Error %d mapping device to LPAR\n", ret); diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c index 52e55108404e..d3a73f9335e1 100644 --- a/arch/x86/pci/irq.c +++ b/arch/x86/pci/irq.c @@ -1119,6 +1119,8 @@ static const struct dmi_system_id pciirq_dmi_table[] __initconst = { void __init pcibios_irq_init(void) { + struct irq_routing_table *rtable = NULL; + DBG(KERN_DEBUG "PCI: IRQ init\n"); if (raw_pci_ops == NULL) @@ -1129,8 +1131,10 @@ void __init pcibios_irq_init(void) pirq_table = pirq_find_routing_table(); #ifdef CONFIG_PCI_BIOS - if (!pirq_table && (pci_probe & PCI_BIOS_IRQ_SCAN)) + if (!pirq_table && (pci_probe & PCI_BIOS_IRQ_SCAN)) { pirq_table = pcibios_get_irq_routing_table(); + rtable = pirq_table; + } #endif if (pirq_table) { pirq_peer_trick(); @@ -1145,8 +1149,10 @@ void __init pcibios_irq_init(void) * If we're using the I/O APIC, avoid using the PCI IRQ * routing table */ - if (io_apic_assign_pci_irqs) + if (io_apic_assign_pci_irqs) { + kfree(rtable); pirq_table = NULL; + } } x86_init.pci.fixup_irqs(); diff --git a/drivers/acpi/pci_mcfg.c b/drivers/acpi/pci_mcfg.c index a4e8432fc2fb..b42be067fb83 100644 --- a/drivers/acpi/pci_mcfg.c +++ b/drivers/acpi/pci_mcfg.c @@ -52,6 +52,18 @@ struct mcfg_fixup { static struct mcfg_fixup mcfg_quirks[] = { /* { OEM_ID, OEM_TABLE_ID, REV, SEGMENT, BUS_RANGE, ops, cfgres }, */ +#define AL_ECAM(table_id, rev, seg, ops) \ + { "AMAZON", table_id, rev, seg, MCFG_BUS_ANY, ops } + + AL_ECAM("GRAVITON", 0, 0, &al_pcie_ops), + AL_ECAM("GRAVITON", 0, 1, &al_pcie_ops), + AL_ECAM("GRAVITON", 0, 2, &al_pcie_ops), + AL_ECAM("GRAVITON", 0, 3, &al_pcie_ops), + AL_ECAM("GRAVITON", 0, 4, &al_pcie_ops), + AL_ECAM("GRAVITON", 0, 5, &al_pcie_ops), + AL_ECAM("GRAVITON", 0, 6, &al_pcie_ops), + AL_ECAM("GRAVITON", 0, 7, &al_pcie_ops), + #define QCOM_ECAM32(seg) \ { "QCOM ", "QDF2432 ", 1, seg, MCFG_BUS_ANY, &pci_32b_ops } diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c index 707aafc7c2aa..c36781a9b493 100644 --- a/drivers/acpi/pci_root.c +++ b/drivers/acpi/pci_root.c @@ -145,6 +145,7 @@ static struct pci_osc_bit_struct pci_osc_support_bit[] = { { OSC_PCI_CLOCK_PM_SUPPORT, "ClockPM" }, { OSC_PCI_SEGMENT_GROUPS_SUPPORT, "Segments" }, { OSC_PCI_MSI_SUPPORT, "MSI" }, + { OSC_PCI_HPX_TYPE_3_SUPPORT, "HPX-Type3" }, }; static struct pci_osc_bit_struct pci_osc_control_bit[] = { @@ -446,6 +447,7 @@ static void negotiate_os_control(struct acpi_pci_root *root, int *no_aspm, * PCI domains, so we indicate this in _OSC support capabilities. */ support = OSC_PCI_SEGMENT_GROUPS_SUPPORT; + support |= OSC_PCI_HPX_TYPE_3_SUPPORT; if (pci_ext_cfg_avail()) support |= OSC_PCI_EXT_CONFIG_SUPPORT; if (pcie_aspm_support_enabled()) diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_topology.c b/drivers/gpu/drm/amd/amdkfd/kfd_topology.c index 09da91644f9f..b0c59a313049 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_topology.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_topology.c @@ -1270,8 +1270,7 @@ int kfd_topology_add_device(struct kfd_dev *gpu) dev->node_props.vendor_id = gpu->pdev->vendor; dev->node_props.device_id = gpu->pdev->device; - dev->node_props.location_id = PCI_DEVID(gpu->pdev->bus->number, - gpu->pdev->devfn); + dev->node_props.location_id = pci_dev_id(gpu->pdev); dev->node_props.max_engine_clk_fcompute = amdgpu_amdkfd_get_max_engine_clock_in_mhz(dev->gpu->kgd); dev->node_props.max_engine_clk_ccompute = diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c index b319e51c379b..8e8121b14c36 100644 --- a/drivers/iommu/amd_iommu.c +++ b/drivers/iommu/amd_iommu.c @@ -165,7 +165,7 @@ static inline u16 get_pci_device_id(struct device *dev) { struct pci_dev *pdev = to_pci_dev(dev); - return PCI_DEVID(pdev->bus->number, pdev->devfn); + return pci_dev_id(pdev); } static inline int get_acpihid_device_id(struct device *dev, diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c index 87274b54febd..a772dedb05b9 100644 --- a/drivers/iommu/intel-iommu.c +++ b/drivers/iommu/intel-iommu.c @@ -1391,7 +1391,7 @@ static void iommu_enable_dev_iotlb(struct device_domain_info *info) /* pdev will be returned if device is not a vf */ pf_pdev = pci_physfn(pdev); - info->pfsid = PCI_DEVID(pf_pdev->bus->number, pf_pdev->devfn); + info->pfsid = pci_dev_id(pf_pdev); } #ifdef CONFIG_INTEL_IOMMU_SVM diff --git a/drivers/iommu/intel_irq_remapping.c b/drivers/iommu/intel_irq_remapping.c index 2d74641b7f7b..871458b873be 100644 --- a/drivers/iommu/intel_irq_remapping.c +++ b/drivers/iommu/intel_irq_remapping.c @@ -424,7 +424,7 @@ static int set_msi_sid(struct irte *irte, struct pci_dev *dev) set_irte_sid(irte, SVT_VERIFY_SID_SQ, SQ_ALL_16, data.alias); else set_irte_sid(irte, SVT_VERIFY_SID_SQ, SQ_ALL_16, - PCI_DEVID(dev->bus->number, dev->devfn)); + pci_dev_id(dev)); return 0; } diff --git a/drivers/misc/pci_endpoint_test.c b/drivers/misc/pci_endpoint_test.c index 29582fe57151..7b015f2a1c6f 100644 --- a/drivers/misc/pci_endpoint_test.c +++ b/drivers/misc/pci_endpoint_test.c @@ -75,6 +75,11 @@ #define PCI_ENDPOINT_TEST_IRQ_TYPE 0x24 #define PCI_ENDPOINT_TEST_IRQ_NUMBER 0x28 +#define PCI_DEVICE_ID_TI_AM654 0xb00c + +#define is_am654_pci_dev(pdev) \ + ((pdev)->device == PCI_DEVICE_ID_TI_AM654) + static DEFINE_IDA(pci_endpoint_test_ida); #define to_endpoint_test(priv) container_of((priv), struct pci_endpoint_test, \ @@ -588,6 +593,7 @@ static long pci_endpoint_test_ioctl(struct file *file, unsigned int cmd, int ret = -EINVAL; enum pci_barno bar; struct pci_endpoint_test *test = to_endpoint_test(file->private_data); + struct pci_dev *pdev = test->pdev; mutex_lock(&test->mutex); switch (cmd) { @@ -595,6 +601,8 @@ static long pci_endpoint_test_ioctl(struct file *file, unsigned int cmd, bar = arg; if (bar < 0 || bar > 5) goto ret; + if (is_am654_pci_dev(pdev) && bar == BAR_0) + goto ret; ret = pci_endpoint_test_bar(test, bar); break; case PCITEST_LEGACY_IR |