diff options
57 files changed, 949 insertions, 476 deletions
diff --git a/Documentation/admin-guide/serial-console.rst b/Documentation/admin-guide/serial-console.rst index 58b32832e50a..8c8b94e54e26 100644 --- a/Documentation/admin-guide/serial-console.rst +++ b/Documentation/admin-guide/serial-console.rst @@ -33,8 +33,11 @@ The format of this option is:: 9600n8. The maximum baudrate is 115200. You can specify multiple console= options on the kernel command line. -Output will appear on all of them. The last device will be used when -you open ``/dev/console``. So, for example:: + +The behavior is well defined when each device type is mentioned only once. +In this case, the output will appear on all requested consoles. And +the last device will be used when you open ``/dev/console``. +So, for example:: console=ttyS1,9600 console=tty0 @@ -42,7 +45,34 @@ defines that opening ``/dev/console`` will get you the current foreground virtual console, and kernel messages will appear on both the VGA console and the 2nd serial port (ttyS1 or COM2) at 9600 baud. -Note that you can only define one console per device type (serial, video). +The behavior is more complicated when the same device type is defined more +times. In this case, there are the following two rules: + +1. The output will appear only on the first device of each defined type. + +2. ``/dev/console`` will be associated with the first registered device. + Where the registration order depends on how kernel initializes various + subsystems. + + This rule is used also when the last console= parameter is not used + for other reasons. For example, because of a typo or because + the hardware is not available. + +The result might be surprising. For example, the following two command +lines have the same result: + + console=ttyS1,9600 console=tty0 console=tty1 + console=tty0 console=ttyS1,9600 console=tty1 + +The kernel messages are printed only on ``tty0`` and ``ttyS1``. And +``/dev/console`` gets associated with ``tty0``. It is because kernel +tries to register graphical consoles before serial ones. It does it +because of the default behavior when no console device is specified, +see below. + +Note that the last ``console=tty1`` parameter still makes a difference. +The kernel command line is used also by systemd. It would use the last +defined ``tty1`` as the login console. If no console device is specified, the first device found capable of acting as a system console will be used. At this time, the system diff --git a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml index 3cbdde85ed71..01ec45b3b406 100644 --- a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml +++ b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml @@ -2,8 +2,8 @@ # Copyright 2019 BayLibre, SAS %YAML 1.2 --- -$id: "http://devicetree.org/schemas/serial/amlogic,meson-uart.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/serial/amlogic,meson-uart.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Amlogic Meson SoC UART Serial Interface @@ -34,6 +34,11 @@ properties: - amlogic,meson-gx-uart - amlogic,meson-s4-uart - const: amlogic,meson-ao-uart + - description: Always-on power domain UART controller on G12A SoCs + items: + - const: amlogic,meson-g12a-uart + - const: amlogic,meson-gx-uart + - const: amlogic,meson-ao-uart - description: Everything-Else power domain UART controller enum: - amlogic,meson6-uart @@ -41,6 +46,10 @@ properties: - amlogic,meson8b-uart - amlogic,meson-gx-uart - amlogic,meson-s4-uart + - description: Everything-Else power domain UART controller on G12A SoCs + items: + - const: amlogic,meson-g12a-uart + - const: amlogic,meson-gx-uart reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml b/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml index 4cbe76e1715b..40414247d61a 100644 --- a/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml +++ b/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml @@ -49,6 +49,24 @@ properties: reg: maxItems: 1 + clocks: + maxItems: 2 + + clock-names: + items: + - const: ipg + - const: per + + dmas: + items: + - description: DMA controller phandle and request line for RX + - description: DMA controller phandle and request line for TX + + dma-names: + items: + - const: rx + - const: tx + interrupts: maxItems: 1 @@ -86,12 +104,16 @@ properties: required: - compatible - reg + - clocks + - clock-names - interrupts unevaluatedProperties: false examples: - | + #include <dt-bindings/clock/imx5-clock.h> + aliases { serial0 = &uart1; }; @@ -100,6 +122,11 @@ examples: compatible = "fsl,imx51-uart", "fsl,imx21-uart"; reg = <0x73fbc000 0x4000>; interrupts = <31>; + clocks = <&clks IMX5_CLK_UART1_IPG_GATE>, + <&clks IMX5_CLK_UART1_PER_GATE>; + clock-names = "ipg", "per"; + dmas = <&sdma 18 4 1>, <&sdma 19 4 2>; + dma-names = "rx", "tx"; uart-has-rtscts; fsl,dte-mode; }; diff --git a/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml b/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml index ab81722293d3..93062403276b 100644 --- a/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml +++ b/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml @@ -65,6 +65,9 @@ properties: - const: rx - const: tx + power-domains: + maxItems: 1 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/serial/qcom,serial-geni-qcom.yaml b/Documentation/devicetree/bindings/serial/qcom,serial-geni-qcom.yaml index 05a6999808d1..dd33794b3534 100644 --- a/Documentation/devicetree/bindings/serial/qcom,serial-geni-qcom.yaml +++ b/Documentation/devicetree/bindings/serial/qcom,serial-geni-qcom.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/serial/qcom,serial-geni-qcom.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/serial/qcom,serial-geni-qcom.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Geni based QUP UART interface diff --git a/Documentation/devicetree/bindings/serial/renesas,em-uart.yaml b/Documentation/devicetree/bindings/serial/renesas,em-uart.yaml index 12d0fa34f9f9..3fc2601f1338 100644 --- a/Documentation/devicetree/bindings/serial/renesas,em-uart.yaml +++ b/Documentation/devicetree/bindings/serial/renesas,em-uart.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/serial/renesas,em-uart.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/serial/renesas,em-uart.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Renesas EMMA Mobile UART Interface diff --git a/Documentation/devicetree/bindings/serial/renesas,hscif.yaml b/Documentation/devicetree/bindings/serial/renesas,hscif.yaml index afedb6edfc34..1c7f1276aed6 100644 --- a/Documentation/devicetree/bindings/serial/renesas,hscif.yaml +++ b/Documentation/devicetree/bindings/serial/renesas,hscif.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/serial/renesas,hscif.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/serial/renesas,hscif.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Renesas High Speed Serial Communication Interface with FIFO (HSCIF) diff --git a/Documentation/devicetree/bindings/serial/renesas,sci.yaml b/Documentation/devicetree/bindings/serial/renesas,sci.yaml index dc445b327e0b..9f7305200c47 100644 --- a/Documentation/devicetree/bindings/serial/renesas,sci.yaml +++ b/Documentation/devicetree/bindings/serial/renesas,sci.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/serial/renesas,sci.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/serial/renesas,sci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Renesas Serial Communication Interface diff --git a/Documentation/devicetree/bindings/serial/renesas,scif.yaml b/Documentation/devicetree/bindings/serial/renesas,scif.yaml index 54e4f41be9b4..99030fc18c45 100644 --- a/Documentation/devicetree/bindings/serial/renesas,scif.yaml +++ b/Documentation/devicetree/bindings/serial/renesas,scif.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/serial/renesas,scif.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/serial/renesas,scif.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Renesas Serial Communication Interface with FIFO (SCIF) diff --git a/Documentation/devicetree/bindings/serial/renesas,scifa.yaml b/Documentation/devicetree/bindings/serial/renesas,scifa.yaml index 4c3b5e7270da..499507678cdf 100644 --- a/Documentation/devicetree/bindings/serial/renesas,scifa.yaml +++ b/Documentation/devicetree/bindings/serial/renesas,scifa.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/serial/renesas,scifa.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/serial/renesas,scifa.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Renesas Serial Communications Interface with FIFO A (SCIFA) diff --git a/Documentation/devicetree/bindings/serial/renesas,scifb.yaml b/Documentation/devicetree/bindings/serial/renesas,scifb.yaml index 2f7cbbb48960..810d8a991fdd 100644 --- a/Documentation/devicetree/bindings/serial/renesas,scifb.yaml +++ b/Documentation/devicetree/bindings/serial/renesas,scifb.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/serial/renesas,scifb.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/serial/renesas,scifb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Renesas Serial Communications Interface with FIFO B (SCIFB) diff --git a/Documentation/devicetree/bindings/serial/serial.yaml b/Documentation/devicetree/bindings/serial/serial.yaml index c9231e501f1f..ea277560a596 100644 --- a/Documentation/devicetree/bindings/serial/serial.yaml +++ b/Documentation/devicetree/bindings/serial/serial.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/serial/serial.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/serial/serial.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Serial Interface Generic diff --git a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml index 2becdfab4f15..3862411c77b5 100644 --- a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml +++ b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml @@ -68,12 +68,12 @@ properties: - const: apb_pclk dmas: - minItems: 2 + maxItems: 2 dma-names: items: - - const: rx - const: tx + - const: rx snps,uart-16550-compatible: description: reflects the value of UART_16550_COMPATIBLE configuration diff --git a/Documentation/devicetree/bindings/serial/sprd-uart.yaml b/Documentation/devicetree/bindings/serial/sprd-uart.yaml index da0e2745b5fc..28ff77aa86c8 100644 --- a/Documentation/devicetree/bindings/serial/sprd-uart.yaml +++ b/Documentation/devicetree/bindings/serial/sprd-uart.yaml @@ -2,8 +2,8 @@ # Copyright 2019 Unisoc Inc. %YAML 1.2 --- -$id: "http://devicetree.org/schemas/serial/sprd-uart.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/serial/sprd-uart.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Spreadtrum serial UART diff --git a/Documentation/devicetree/bindings/serial/sunplus,sp7021-uart.yaml b/Documentation/devicetree/bindings/serial/sunplus,sp7021-uart.yaml index ea1e637661c7..7d0a4bcb88e9 100644 --- a/Documentation/devicetree/bindings/serial/sunplus,sp7021-uart.yaml +++ b/Documentation/devicetree/bindings/serial/sunplus,sp7021-uart.yaml @@ -2,8 +2,8 @@ # Copyright (C) Sunplus Co., Ltd. 2021 %YAML 1.2 --- -$id: "http://devicetree.org/schemas/serial/sunplus,sp7021-uart.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/serial/sunplus,sp7021-uart.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Sunplus SoC SP7021 UART Controller diff --git a/Documentation/driver-api/tty/n_gsm.rst b/Documentation/driver-api/tty/n_gsm.rst index 9447b8a3b8e2..120317ec990f 100644 --- a/Documentation/driver-api/tty/n_gsm.rst +++ b/Documentation/driver-api/tty/n_gsm.rst @@ -29,6 +29,8 @@ Config Initiator #. Configure the mux using ``GSMIOC_GETCONF``/``GSMIOC_SETCONF`` ioctl. +#. Configure DLCs using ``GSMIOC_GETCONF_DLCI``/``GSMIOC_SETCONF_DLCI`` ioctl for non-defaults. + #. Obtain base gsmtty number for the used serial port. Major parts of the initialization program @@ -45,6 +47,7 @@ Config Initiator int ldisc = N_GSM0710; struct gsm_config c; struct gsm_config_ext ce; + struct gsm_dlci_config dc; struct termios configuration; uint32_t first; @@ -81,6 +84,13 @@ Config Initiator c.mtu = 127; /* set the new configuration */ ioctl(fd, GSMIOC_SETCONF, &c); + /* get DLC 1 configuration */ + dc.channel = 1; + ioctl(fd, GSMIOC_GETCONF_DLCI, &dc); + /* the first user channel gets a higher priority */ + dc.priority = 1; + /* set the new DLC 1 specific configuration */ + ioctl(fd, GSMIOC_SETCONF_DLCI, &dc); /* get first gsmtty device node */ ioctl(fd, GSMIOC_GETFIRST, &first); printf("first muxed line: /dev/gsmtty%i\n", first); @@ -120,6 +130,8 @@ Config Requester #. Configure the mux using ``GSMIOC_GETCONF``/``GSMIOC_SETCONF`` ioctl. +#. Configure DLCs using ``GSMIOC_GETCONF_DLCI``/``GSMIOC_SETCONF_DLCI`` ioctl for non-defaults. + #. Obtain base gsmtty number for the used serial port:: #include <stdio.h> @@ -132,6 +144,7 @@ Config Requester int ldisc = N_GSM0710; struct gsm_config c; struct gsm_config_ext ce; + struct gsm_dlci_config dc; struct termios configuration; uint32_t first; @@ -161,6 +174,13 @@ Config Requester c.mtu = 127; /* set the new configuration */ ioctl(fd, GSMIOC_SETCONF, &c); + /* get DLC 1 configuration */ + dc.channel = 1; + ioctl(fd, GSMIOC_GETCONF_DLCI, &dc); + /* the first user channel gets a higher priority */ + dc.priority = 1; + /* set the new DLC 1 specific configuration */ + ioctl(fd, GSMIOC_SETCONF_DLCI, &dc); /* get first gsmtty device node */ ioctl(fd, GSMIOC_GETFIRST, &first); printf("first muxed line: /dev/gsmtty%i\n", first); diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi index feb27a0ccfb4..0c49655cc90c 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi @@ -2045,7 +2045,8 @@ }; uart_AO: serial@3000 { - compatible = "amlogic,meson-gx-uart", + compatible = "amlogic,meson-g12a-uart", + "amlogic,meson-gx-uart", "amlogic,meson-ao-uart"; reg = <0x0 0x3000 0x0 0x18>; interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>; @@ -2055,7 +2056,8 @@ }; uart_AO_B: serial@4000 { - compatible = "amlogic,meson-gx-uart", + compatible = "amlogic,meson-g12a-uart", + "amlogic,meson-gx-uart", "amlogic,meson-ao-uart"; reg = <0x0 0x4000 0x0 0x18>; interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>; @@ -2292,7 +2294,8 @@ }; uart_C: serial@22000 { - compatible = "amlogic,meson-gx-uart"; + compatible = "amlogic,meson-g12a-uart", + "amlogic,meson-gx-uart"; reg = <0x0 0x22000 0x0 0x18>; interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>; clocks = <&xtal>, <&clkc CLKID_UART2>, <&xtal>; @@ -2301,7 +2304,8 @@ }; uart_B: serial@23000 { - compatible = "amlogic,meson-gx-uart"; + compatible = "amlogic,meson-g12a-uart", + "amlogic,meson-gx-uart"; reg = <0x0 0x23000 0x0 0x18>; interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>; clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>; @@ -2310,7 +2314,8 @@ }; uart_A: serial@24000 { - compatible = "amlogic,meson-gx-uart"; + compatible = "amlogic,meson-g12a-uart", + "amlogic,meson-gx-uart"; reg = <0x0 0x24000 0x0 0x18>; interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>; diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c index 6ddfeb2fe98f..97c5bfb9d58a 100644 --- a/drivers/char/pcmcia/synclink_cs.c +++ b/drivers/char/pcmcia/synclink_cs.c @@ -1060,7 +1060,7 @@ static void cts_change(MGSLPC_INFO *info, struct tty_struct *tty) if (info->serial_signals & SerialSignal_CTS) { if (debug_level >= DEBUG_LEVEL_ISR) printk("CTS tx start..."); - tty->hw_stopped = 0; + tty->hw_stopped = false; tx_start(info, tty); info->pending_bh |= BH_TRANSMIT; return; @@ -1069,7 +1069,7 @@ static void cts_change(MGSLPC_INFO *info, struct tty_struct *tty) if (!(info->serial_signals & SerialSignal_CTS)) { if (debug_level >= DEBUG_LEVEL_ISR) printk("CTS tx stop..."); - tty->hw_stopped = 1; + tty->hw_stopped = true; tx_stop(info); } } @@ -2312,7 +2312,7 @@ static void mgslpc_set_termios(struct tty_struct *tty, /* Handle turning off CRTSCTS */ if (old_termios->c_cflag & CRTSCTS && !C_CRTSCTS(tty)) { - tty->hw_stopped = 0; + tty->hw_stopped = false; tx_release(tty); } } diff --git a/drivers/mmc/core/sdio_uart.c b/drivers/mmc/core/sdio_uart.c <index 50536fe59f1a..aa659758563f 100644 --- a/drivers/mmc/core/sdio_uart.c +++ b/drivers/mmc/core/sdio_uart.c |