diff options
38 files changed, 1669 insertions, 671 deletions
diff --git a/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml b/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml index 5efceb313879..c384bf0bb25d 100644 --- a/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml +++ b/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml @@ -49,7 +49,6 @@ patternProperties: $ref: input.yaml# properties: label: - $ref: /schemas/types.yaml#/definitions/string description: Descriptive name of the key linux,code: true diff --git a/Documentation/devicetree/bindings/input/atmel,captouch.txt b/Documentation/devicetree/bindings/input/atmel,captouch.txt deleted file mode 100644 index fe9ee5c53bcc..000000000000 --- a/Documentation/devicetree/bindings/input/atmel,captouch.txt +++ /dev/null @@ -1,36 +0,0 @@ -Device tree bindings for Atmel capacitive touch device, typically -an Atmel touch sensor connected to AtmegaXX MCU running firmware -based on Qtouch library. - -The node for this device must be a child of a I2C controller node, as the -device communicates via I2C. - -Required properties: - - compatible: Must be "atmel,captouch". - reg: The I2C slave address of the device. - interrupts: Property describing the interrupt line the device - is connected to. The device only has one interrupt - source. - linux,keycodes: Specifies an array of numeric keycode values to - be used for reporting button presses. The array can - contain up to 8 entries. - -Optional properties: - - autorepeat: Enables the Linux input system's autorepeat - feature on the input device. - -Example: - - atmel-captouch@51 { - compatible = "atmel,captouch"; - reg = <0x51>; - interrupt-parent = <&tlmm>; - interrupts = <67 IRQ_TYPE_EDGE_FALLING>; - linux,keycodes = <BTN_0>, <BTN_1>, - <BTN_2>, <BTN_3>, - <BTN_4>, <BTN_5>, - <BTN_6>, <BTN_7>; - autorepeat; - }; diff --git a/Documentation/devicetree/bindings/input/atmel,captouch.yaml b/Documentation/devicetree/bindings/input/atmel,captouch.yaml new file mode 100644 index 000000000000..f7477091d5a6 --- /dev/null +++ b/Documentation/devicetree/bindings/input/atmel,captouch.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/atmel,captouch.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Atmel capacitive touch device + +maintainers: + - Dharma balasubiramani <dharma.b@microchip.com> + +description: + Atmel capacitive touch device, typically an Atmel touch sensor connected to + AtmegaXX MCU running firmware based on Qtouch library. + +allOf: + - $ref: input.yaml# + +properties: + compatible: + const: atmel,captouch + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + linux,keycodes: + minItems: 1 + maxItems: 8 + +required: + - compatible + - reg + - interrupts + - linux,keycodes + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/input/linux-event-codes.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + touch@51 { + compatible = "atmel,captouch"; + reg = <0x51>; + interrupt-parent = <&tlmm>; + interrupts = <67 IRQ_TYPE_EDGE_FALLING>; + linux,keycodes = <BTN_0>, <BTN_1>, + <BTN_2>, <BTN_3>, + <BTN_4>, <BTN_5>, + <BTN_6>, <BTN_7>; + autorepeat; + }; + }; diff --git a/Documentation/devicetree/bindings/input/samsung,s3c6410-keypad.yaml b/Documentation/devicetree/bindings/input/samsung,s3c6410-keypad.yaml new file mode 100644 index 000000000000..a53569aa0ee7 --- /dev/null +++ b/Documentation/devicetree/bindings/input/samsung,s3c6410-keypad.yaml @@ -0,0 +1,121 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/samsung,s3c6410-keypad.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung SoC series Keypad Controller + +description: + Samsung SoC Keypad controller is used to interface a SoC with a matrix-type + keypad device. The keypad controller supports multiple row and column lines. + A key can be placed at each intersection of a unique row and a unique column. + The keypad controller can sense a key-press and key-release and report the + event using a interrupt to the cpu. + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + +properties: + compatible: + enum: + - samsung,s3c6410-keypad + - samsung,s5pv210-keypad + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: keypad + + interrupts: + maxItems: 1 + + wakeup-source: true + + linux,input-no-autorepeat: + type: boolean + description: + Do no enable autorepeat feature. + + linux,input-wakeup: + type: boolean + deprecated: true + + samsung,keypad-num-columns: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Number of column lines connected to the keypad controller. + + samsung,keypad-num-rows: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Number of row lines connected to the keypad controller. + +patternProperties: + '^key-[0-9a-z]+$': + type: object + $ref: input.yaml# + additionalProperties: false + description: + Each key connected to the keypad controller is represented as a child + node to the keypad controller device node. + + properties: + keypad,column: + $ref: /schemas/types.yaml#/definitions/uint32 + description: The column number to which the key is connected. + + keypad,row: + $ref: /schemas/types.yaml#/definitions/uint32 + description: The row number to which the key is connected. + + linux,code: true + + required: + - keypad,column + - keypad,row + - linux,code + +required: + - compatible + - reg + - interrupts + - samsung,keypad-num-columns + - samsung,keypad-num-rows + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/exynos4.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + keypad@100a0000 { + compatible = "samsung,s5pv210-keypad"; + reg = <0x100a0000 0x100>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_KEYIF>; + clock-names = "keypad"; + + samsung,keypad-num-rows = <2>; + samsung,keypad-num-columns = <8>; + linux,input-no-autorepeat; + wakeup-source; + + key-1 { + keypad,row = <0>; + keypad,column = <3>; + linux,code = <2>; + }; + + key-2 { + keypad,row = <0>; + keypad,column = <4>; + linux,code = <3>; + }; + }; diff --git a/Documentation/devicetree/bindings/input/samsung-keypad.txt b/Documentation/devicetree/bindings/input/samsung-keypad.txt deleted file mode 100644 index 4c5c0a82586d..000000000000 --- a/Documentation/devicetree/bindings/input/samsung-keypad.txt +++ /dev/null @@ -1,77 +0,0 @@ -* Samsung's Keypad Controller device tree bindings - -Samsung's Keypad controller is used to interface a SoC with a matrix-type -keypad device. The keypad controller supports multiple row and column lines. -A key can be placed at each intersection of a unique row and a unique column. -The keypad controller can sense a key-press and key-release and report the -event using a interrupt to the cpu. - -Required SoC Specific Properties: -- compatible: should be one of the following - - "samsung,s3c6410-keypad": For controllers compatible with s3c6410 keypad - controller. - - "samsung,s5pv210-keypad": For controllers compatible with s5pv210 keypad - controller. - -- reg: physical base address of the controller and length of memory mapped - region. - -- interrupts: The interrupt number to the cpu. - -Required Board Specific Properties: -- samsung,keypad-num-rows: Number of row lines connected to the keypad - controller. - -- samsung,keypad-num-columns: Number of column lines connected to the - keypad controller. - -- Keys represented as child nodes: Each key connected to the keypad - controller is represented as a child node to the keypad controller - device node and should include the following properties. - - keypad,row: the row number to which the key is connected. - - keypad,column: the column number to which the key is connected. - - linux,code: the key-code to be reported when the key is pressed - and released. - -- pinctrl-0: Should specify pin control groups used for this controller. -- pinctrl-names: Should contain only one value - "default". - -Optional Properties: -- wakeup-source: use any event on keypad as wakeup event. - (Legacy property supported: "linux,input-wakeup") - -Optional Properties specific to linux: -- linux,keypad-no-autorepeat: do no enable autorepeat feature. - - -Example: - keypad@100a0000 { - compatible = "samsung,s5pv210-keypad"; - reg = <0x100A0000 0x100>; - interrupts = <173>; - samsung,keypad-num-rows = <2>; - samsung,keypad-num-columns = <8>; - linux,input-no-autorepeat; - wakeup-source; - - pinctrl-names = "default"; - pinctrl-0 = <&keypad_rows &keypad_columns>; - - key_1 { - keypad,row = <0>; - keypad,column = <3>; - linux,code = <2>; - }; - - key_2 { - keypad,row = <0>; - keypad,column = <4>; - linux,code = <3>; - }; - - key_3 { - keypad,row = <0>; - keypad,column = <5>; - linux,code = <4>; - }; - }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix,gt9916.yaml b/Documentation/devicetree/bindings/input/touchscreen/goodix,gt9916.yaml new file mode 100644 index 000000000000..d90f045ac06c --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/goodix,gt9916.yaml @@ -0,0 +1,95 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/goodix,gt9916.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Goodix Berlin series touchscreen controller + +description: The Goodix Berlin series of touchscreen controllers + be connected to either I2C or SPI buses. + +maintainers: + - Neil Armstrong <neil.armstrong@linaro.org> + +allOf: + - $ref: touchscreen.yaml# + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + enum: + - goodix,gt9916 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + avdd-supply: + description: Analog power supply regulator on AVDD pin + + vddio-supply: + description: power supply regulator on VDDIO pin + + spi-max-frequency: true + touchscreen-inverted-x: true + touchscreen-inverted-y: true + touchscreen-size-x: true + touchscreen-size-y: true + touchscreen-swapped-x-y: true + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + - avdd-supply + - touchscreen-size-x + - touchscreen-size-y + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + touchscreen@5d { + compatible = "goodix,gt9916"; + reg = <0x5d>; + interrupt-parent = <&gpio>; + interrupts = <25 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; + avdd-supply = <&ts_avdd>; + touchscreen-size-x = <1024>; + touchscreen-size-y = <768>; + }; + }; + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + num-cs = <1>; + cs-gpios = <&gpio 2 GPIO_ACTIVE_HIGH>; + touchscreen@0 { + compatible = "goodix,gt9916"; + reg = <0>; + interrupt-parent = <&gpio>; + interrupts = <25 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; + avdd-supply = <&ts_avdd>; + spi-max-frequency = <1000000>; + touchscreen-size-x = <1024>; + touchscreen-size-y = <768>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml b/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml index 3d016b87c8df..2a2d86cfd104 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml @@ -37,8 +37,9 @@ properties: maxItems: 1 irq-gpios: - description: GPIO pin used for IRQ. The driver uses the interrupt gpio pin - as output to reset the device. + description: GPIO pin used for IRQ input. Additionally, this line is + sampled by the device on reset deassertion to select the I2C client + address, thus it can be driven by the host during the reset sequence. maxItems: 1 reset-gpios: diff --git a/Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml b/Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml index 0d6b033fd5fb..77ba280b3bdc 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml @@ -9,15 +9,14 @@ title: Imagis IST30XXC family touchscreen controller maintainers: - Markuss Broks <markuss.broks@gmail.com> -allOf: - - $ref: touchscreen.yaml# - properties: $nodename: pattern: "^touchscreen@[0-9a-f]+$" compatible: enum: + - imagis,ist3032c + - imagis,ist3038b - imagis,ist3038c reg: @@ -32,6 +31,10 @@ properties: vddio-supply: description: Power supply regulator for the I2C bus + linux,keycodes: + description: Keycodes for the touch keys + maxItems: 5 + touchscreen-size-x: true touchscreen-size-y: true touchscreen-fuzz-x: true @@ -42,6 +45,18 @@ properties: additionalProperties: false +allOf: + - $ref: touchscreen.yaml# + - if: + not: + properties: + compatible: + contains: + const: imagis,ist3032c + then: + properties: + linux,keycodes: false + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/input/touchscreen/melfas,mms114.yaml b/Documentation/devicetree/bindings/input/touchscreen/melfas,mms114.yaml index 07f9dd6b1c9c..90ebd4f8354c 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/melfas,mms114.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/melfas,mms114.yaml @@ -17,13 +17,17 @@ properties: pattern: "^touchscreen(@.*)?$" compatible: - items: + oneOf: - enum: - melfas,mms114 - melfas,mms134s - melfas,mms136 - melfas,mms152 - melfas,mms345l + - items: + - enum: + - melfas,mms252 + - const: melfas,mms114 reg: description: I2C address diff --git a/Documentation/devicetree/bindings/input/touchscreen/silead,gsl1680.yaml b/Documentation/devicetree/bindings/input/touchscreen/silead,gsl1680.yaml index 95b554be25b4..5381a96f4949 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/silead,gsl1680.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/silead,gsl1680.yaml @@ -31,7 +31,7 @@ properties: maxItems: 1 firmware-name: - $ref: /schemas/types.yaml#/definitions/string + maxItems: 1 description: > File basename for board specific firmware diff --git a/Documentation/devicetree/bindings/power/wakeup-source.txt b/Documentation/devicetree/bindings/power/wakeup-source.txt index 75bc20b95688..a6c8978964aa 100644 --- a/Documentation/devicetree/bindings/power/wakeup-source.txt +++ b/Documentation/devicetree/bindings/power/wakeup-source.txt @@ -27,7 +27,7 @@ List of legacy properties and respective binding document Documentation/devicetree/bindings/mfd/tc3589x.txt Documentation/devicetree/bindings/input/touchscreen/ads7846.txt 4. "linux,keypad-wakeup" Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt -5. "linux,input-wakeup" Documentation/devicetree/bindings/input/samsung-keypad.txt +5. "linux,input-wakeup" Documentation/devicetree/bindings/input/samsung,s3c6410-keypad.yaml 6. "nvidia,wakeup-source" Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt Examples diff --git a/drivers/input/gameport/gameport.c b/drivers/input/gameport/gameport.c index 34f416a3ebcb..cfcc81c47b50 100644 --- a/drivers/input/gameport/gameport.c +++ b/drivers/input/gameport/gameport.c @@ -38,7 +38,7 @@ static DEFINE_MUTEX(gameport_mutex); static LIST_HEAD(gameport_list); -static struct bus_type gameport_bus; +static const struct bus_type gameport_bus; static void gameport_add_port(struct gameport *gameport); static void gameport_attach_driver(struct gameport_driver *drv); @@ -813,7 +813,7 @@ static int gameport_bus_match(struct device *dev, struct device_driver *drv) return !gameport_drv->ignore; } -static struct bus_type gameport_bus = { +static const struct bus_type gameport_bus = { .name = "gameport", .dev_groups = gameport_device_groups, .drv_groups = gameport_driver_groups, diff --git a/drivers/input/input-leds.c b/drivers/input/input-leds.c index 0e935914bc3a..6bbf3806ea37 100644 --- a/drivers/input/input-leds.c +++ b/drivers/input/input-leds.c @@ -18,6 +18,12 @@ #define VT_TRIGGER(_name) .trigger = NULL #endif +#if IS_ENABLED(CONFIG_SND_CTL_LED) +#define AUDIO_TRIGGER(_name) .trigger = _name +#else +#define AUDIO_TRIGGER(_name) .trigger = NULL +#endif + static const struct { const char *name; const char *trigger; @@ -29,7 +35,7 @@ static const struct { [LED_KANA] = { "kana", VT_TRIGGER("kbd-kanalock") }, [LED_SLEEP] = { "sleep" } , [LED_SUSPEND] = { "suspend" }, - [LED_MUTE] = { "mute" }, + [LED_MUTE] = { "mute", AUDIO_TRIGGER("audio-mute") }, [LED_MISC] = { "misc" }, [LED_MAIL] = { "mail" }, [LED_CHARGING] = { "charging" }, diff --git a/drivers/input/input.c b/drivers/input/input.c index f71ea4fb173f..711485437567 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -1918,7 +1918,7 @@ static char *input_devnode(const struct device *dev, umode_t *mode) return kasprintf(GFP_KERNEL, "input/%s", dev_name(dev)); } -struct class input_class = { +const struct class input_class = { .name = "input", .devnode = input_devnode, }; @@ -2629,17 +2629,15 @@ int input_get_new_minor(int legacy_base, unsigned int legacy_num, * locking is needed here. */ if (legacy_base >= 0) { - int minor = ida_simple_get(&input_ida, - legacy_base, - legacy_base + legacy_num, - GFP_KERNEL); + int minor = ida_alloc_range(&input_ida, legacy_base, + legacy_base + legacy_num - 1, + GFP_KERNEL); if (minor >= 0 || !allow_dynamic) return minor; } - return ida_simple_get(&input_ida, - INPUT_FIRST_DYNAMIC_DEV, INPUT_MAX_CHAR_DEVICES, - GFP_KERNEL); + return ida_alloc_range(&input_ida, INPUT_FIRST_DYNAMIC_DEV, + INPUT_MAX_CHAR_DEVICES - 1, GFP_KERNEL); } EXPORT_SYMBOL(input_get_new_minor); @@ -2652,7 +2650,7 @@ EXPORT_SYMBOL(input_get_new_minor); */ void input_free_minor(unsigned int minor) { - ida_simple_remove(&input_ida, minor); + ida_free(&input_ida, minor); } EXPORT_SYMBOL(input_free_minor); diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c index 14c828adebf7..f50848ed5575 100644 --- a/drivers/input/joystick/xpad.c +++ b/drivers/input/joystick/xpad.c @@ -127,6 +127,7 @@ static const struct xpad_device { u8 mapping; u8 xtype; } xpad_device[] = { + /* Please keep this list sorted by vendor and product ID. */ { 0x0079, 0x18d4, "GPD Win 2 X-Box Controller", 0, XTYPE_XBOX360 }, { 0x03eb, 0xff01, "Wooting One (Legacy)", 0, XTYPE_XBOX360 }, { 0x03eb, 0xff02, "Wooting Two (Legacy)", 0, XTYPE_XBOX360 }, @@ -152,9 +153,9 @@ static const struct xpad_device { { 0x045e, 0x02d1, "Microsoft X-Box One pad", 0, XTYPE_XBOXONE }, { 0x045e, 0x02dd, "Microsoft X-Box One pad (Firmware 2015)", 0, XTYPE_XBOXONE }, { 0x045e, 0x02e3, "Microsoft X-Box One Elite pad", MAP_PADDLES, XTYPE_XBOXONE }, - { 0x045e, 0x0b00, "Microsoft X-Box One Elite 2 pad", MAP_PADDLES, XTYPE_XBOXONE }, { 0x045e, 0x02ea, "Microsoft X-Box One S pad", 0, XTYPE_XBOXONE }, { 0x045e, 0x0719, "Xbox 360 Wireless Receiver", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360W }, + { 0x045e, 0x0b00, "Microsoft X-Box One Elite 2 pad", MAP_PADDLES, XTYPE_XBOXONE }, { 0x045e, 0x0b0a, "Microsoft X-Box Adaptive Controller", MAP_PROFILE_BUTTON, XTYPE_XBOXONE }, { 0x045e, 0x0b12, "Microsoft Xbox Series S|X Controller", MAP_SELECT_BUTTON, XTYPE_XBOXONE }, { 0x046d, 0xc21d, "Logitech Gamepad F310", 0, XTYPE_XBOX360 }, @@ -340,7 +341,6 @@ static const struct xpad_device { { 0x20d6, 0x2001, "BDA Xbox Series X Wired Controller", 0, XTYPE_XBOXONE }, { 0x20d6, 0x2009, "PowerA Enhanced Wired Controller for Xbox Series X|S", 0, XTYPE_XBOXONE }, { 0x20d6, 0x281f, "PowerA Wired Controller For Xbox 360", 0, XTYPE_XBOX360 }, - { 0x2e24, 0x0652, "Hyperkin Duke X-Box One pad", 0, XTYPE_XBOXONE }, { 0x24c6, 0x5000, "Razer Atrox Arcade Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, { 0x24c6, 0x5300, "PowerA MINI PROEX Controller", 0, XTYPE_XBOX360 }, { 0x24c6, 0x5303, "Xbox Airflo wired controller", 0, XTYPE_XBOX360 }, @@ -355,9 +355,9 @@ static const struct xpad_device { { 0x24c6, 0x5502, "Hori Fighting Stick VX Alt", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, { 0x24c6, 0x5503, "Hori Fighting Edge", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, { 0x24c6, 0x5506, "Hori SOULCALIBUR V Stick", 0, XTYPE_XBOX360 }, - { 0x24c6, 0x5510, "Hori Fighting Commander ONE (Xbox 360/PC Mode)", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, { 0x24c6, 0x550d, "Hori GEM Xbox controller", 0, XTYPE_XBOX360 }, { 0x24c6, 0x550e, "Hori Real Arcade Pro V Kai 360", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, + { 0x24c6, 0x5510, "Hori Fighting Commander ONE (Xbox 360/PC Mode)", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, { 0x24c6, 0x551a, "PowerA FUSION Pro Controller", 0, XTYPE_XBOXONE }, { 0x24c6, 0x561a, "PowerA FUSION Controller", 0, XTYPE_XBOXONE }, { 0x24c6, 0x5b00, "ThrustMaster Ferrari 458 Racing Wheel", 0, XTYPE_XBOX360 }, @@ -366,8 +366,11 @@ static const struct xpad_device { { 0x24c6, 0x5d04, "Razer Sabertooth", 0, XTYPE_XBOX360 }, { 0x24c6, 0xfafe, "Rock Candy Gamepad for Xbox 360", 0, XTYPE_XBOX360 }, { 0x2563, 0x058d, "OneXPlayer Gamepad", 0, XTYPE_XBOX360 }, + { 0x294b, 0x3303, "Snakebyte GAMEPAD BASE X", 0, XTYPE_XBOXONE }, + { 0x294b, 0x3404, "Snakebyte GAMEPAD RGB X", 0, XTYPE_XBOXONE }, { 0x2dc8, 0x2000, "8BitDo Pro 2 Wired Controller fox Xbox", 0, XTYPE_XBOXONE }, { 0x2dc8, 0x3106, "8BitDo Pro 2 Wired Controller", 0, XTYPE_XBOX360 }, + { 0x2e24, 0x0652, "Hyperkin Duke X-Box One pad", 0, XTYPE_XBOXONE }, { 0x31e3, 0x1100, "Wooting One", 0, XTYPE_XBOX360 }, { 0x31e3, 0x1200, "Wooting Two", 0, XTYPE_XBOX360 }, { 0x31e3, 0x1210, "Wooting Lekker", 0, XTYPE_XBOX360 }, @@ -465,6 +468,10 @@ static const signed short xpad_btn_paddles[] = { { XPAD_XBOXONE_VENDOR_PROTOCOL((vend), 208) } static const struct usb_device_id xpad_table[] = { + /* + * Please keep this list so |