diff options
27 files changed, 350 insertions, 1101 deletions
diff --git a/arch/x86/Makefile b/arch/x86/Makefile index 57996ee840dd..43e8328a23e4 100644 --- a/arch/x86/Makefile +++ b/arch/x86/Makefile @@ -149,12 +149,6 @@ endif sp-$(CONFIG_X86_32) := esp sp-$(CONFIG_X86_64) := rsp -# do binutils support CFI? -cfi := $(call as-instr,.cfi_startproc\n.cfi_rel_offset $(sp-y)$(comma)0\n.cfi_endproc,-DCONFIG_AS_CFI=1) -# is .cfi_signal_frame supported too? -cfi-sigframe := $(call as-instr,.cfi_startproc\n.cfi_signal_frame\n.cfi_endproc,-DCONFIG_AS_CFI_SIGNAL_FRAME=1) -cfi-sections := $(call as-instr,.cfi_sections .debug_frame,-DCONFIG_AS_CFI_SECTIONS=1) - # does binutils support specific instructions? asinstr := $(call as-instr,fxsaveq (%rax),-DCONFIG_AS_FXSAVEQ=1) asinstr += $(call as-instr,pshufb %xmm0$(comma)%xmm0,-DCONFIG_AS_SSSE3=1) @@ -162,8 +156,8 @@ asinstr += $(call as-instr,crc32l %eax$(comma)%eax,-DCONFIG_AS_CRC32=1) avx_instr := $(call as-instr,vxorps %ymm0$(comma)%ymm1$(comma)%ymm2,-DCONFIG_AS_AVX=1) avx2_instr :=$(call as-instr,vpbroadcastb %xmm0$(comma)%ymm1,-DCONFIG_AS_AVX2=1) -KBUILD_AFLAGS += $(cfi) $(cfi-sigframe) $(cfi-sections) $(asinstr) $(avx_instr) $(avx2_instr) -KBUILD_CFLAGS += $(cfi) $(cfi-sigframe) $(cfi-sections) $(asinstr) $(avx_instr) $(avx2_instr) +KBUILD_AFLAGS += $(asinstr) $(avx_instr) $(avx2_instr) +KBUILD_CFLAGS += $(asinstr) $(avx_instr) $(avx2_instr) LDFLAGS := -m elf_$(UTS_MACHINE) diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S index 63450a596800..2be23c734db5 100644 --- a/arch/x86/ia32/ia32entry.S +++ b/arch/x86/ia32/ia32entry.S @@ -4,7 +4,6 @@ * Copyright 2000-2002 Andi Kleen, SuSE Labs. */ -#include <asm/dwarf2.h> #include <asm/calling.h> #include <asm/asm-offsets.h> #include <asm/current.h> @@ -60,17 +59,6 @@ movl %eax,%eax /* zero extension */ .endm - .macro CFI_STARTPROC32 simple - CFI_STARTPROC \simple - CFI_UNDEFINED r8 - CFI_UNDEFINED r9 - CFI_UNDEFINED r10 - CFI_UNDEFINED r11 - CFI_UNDEFINED r12 - CFI_UNDEFINED r13 - CFI_UNDEFINED r14 - CFI_UNDEFINED r15 - .endm #ifdef CONFIG_PARAVIRT ENTRY(native_usergs_sysret32) @@ -102,11 +90,6 @@ ENDPROC(native_usergs_sysret32) * with the int 0x80 path. */ ENTRY(ia32_sysenter_target) - CFI_STARTPROC32 simple - CFI_SIGNAL_FRAME - CFI_DEF_CFA rsp,0 - CFI_REGISTER rsp,rbp - /* * Interrupts are off on entry. * We do not frame this tiny irq-off block with TRACE_IRQS_OFF/ON, @@ -121,25 +104,21 @@ ENTRY(ia32_sysenter_target) movl %eax, %eax movl ASM_THREAD_INFO(TI_sysenter_return, %rsp, 0), %r10d - CFI_REGISTER rip,r10 /* Construct struct pt_regs on stack */ - pushq_cfi $__USER32_DS /* pt_regs->ss */ - pushq_cfi %rbp /* pt_regs->sp */ - CFI_REL_OFFSET rsp,0 - pushfq_cfi /* pt_regs->flags */ - pushq_cfi $__USER32_CS /* pt_regs->cs */ - pushq_cfi %r10 /* pt_regs->ip = thread_info->sysenter_return */ - CFI_REL_OFFSET rip,0 - pushq_cfi_reg rax /* pt_regs->orig_ax */ - pushq_cfi_reg rdi /* pt_regs->di */ - pushq_cfi_reg rsi /* pt_regs->si */ - pushq_cfi_reg rdx /* pt_regs->dx */ - pushq_cfi_reg rcx /* pt_regs->cx */ - pushq_cfi $-ENOSYS /* pt_regs->ax */ + pushq $__USER32_DS /* pt_regs->ss */ + pushq %rbp /* pt_regs->sp */ + pushfq /* pt_regs->flags */ + pushq $__USER32_CS /* pt_regs->cs */ + pushq %r10 /* pt_regs->ip = thread_info->sysenter_return */ + pushq %rax /* pt_regs->orig_ax */ + pushq %rdi /* pt_regs->di */ + pushq %rsi /* pt_regs->si */ + pushq %rdx /* pt_regs->dx */ + pushq %rcx /* pt_regs->cx */ + pushq $-ENOSYS /* pt_regs->ax */ cld sub $(10*8),%rsp /* pt_regs->r8-11,bp,bx,r12-15 not saved */ - CFI_ADJUST_CFA_OFFSET 10*8 /* * no need to do an access_ok check here because rbp has been @@ -161,8 +140,8 @@ sysenter_flags_fixed: orl $TS_COMPAT, ASM_THREAD_INFO(TI_status, %rsp, SIZEOF_PTREGS) testl $_TIF_WORK_SYSCALL_ENTRY, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS) - CFI_REMEMBER_STATE jnz sysenter_tracesys + sysenter_do_call: /* 32bit syscall -> 64bit C ABI argument conversion */ movl %edi,%r8d /* arg5 */ @@ -193,14 +172,12 @@ sysexit_from_sys_call: */ andl $~TS_COMPAT,ASM_THREAD_INFO(TI_status, %rsp, SIZEOF_PTREGS) movl RIP(%rsp),%ecx /* User %eip */ - CFI_REGISTER rip,rcx RESTORE_RSI_RDI xorl %edx,%edx /* avoid info leaks */ xorq %r8,%r8 xorq %r9,%r9 xorq %r10,%r10 movl EFLAGS(%rsp),%r11d /* User eflags */ - /*CFI_RESTORE rflags*/ TRACE_IRQS_ON /* @@ -231,8 +208,6 @@ sysexit_from_sys_call: */ USERGS_SYSRET32 - CFI_RESTORE_STATE - #ifdef CONFIG_AUDITSYSCALL .macro auditsys_entry_common movl %esi,%r8d /* 5th arg: 4th syscall arg */ @@ -282,8 +257,8 @@ sysexit_audit: #endif sysenter_fix_flags: - pushq_cfi $(X86_EFLAGS_IF|X86_EFLAGS_FIXED) - popfq_cfi + pushq $(X86_EFLAGS_IF|X86_EFLAGS_FIXED) + popfq jmp sysenter_flags_fixed sysenter_tracesys: @@ -298,7 +273,6 @@ sysenter_tracesys: LOAD_ARGS32 /* reload args from stack in case ptrace changed it */ RESTORE_EXTRA_REGS jmp sysenter_do_call - CFI_ENDPROC ENDPROC(ia32_sysenter_target) /* @@ -332,12 +306,6 @@ ENDPROC(ia32_sysenter_target) * with the int 0x80 path. */ ENTRY(ia32_cstar_target) - CFI_STARTPROC32 simple - CFI_SIGNAL_FRAME - CFI_DEF_CFA rsp,0 - CFI_REGISTER rip,rcx - /*CFI_REGISTER rflags,r11*/ - /* * Interrupts are off on entry. * We do not frame this tiny irq-off block with TRACE_IRQS_OFF/ON, @@ -345,7 +313,6 @@ ENTRY(ia32_cstar_target) */ SWAPGS_UNSAFE_STACK movl %esp,%r8d - CFI_REGISTER rsp,r8 movq PER_CPU_VAR(cpu_current_top_of_stack),%rsp ENABLE_INTERRUPTS(CLBR_NONE) @@ -353,22 +320,19 @@ ENTRY(ia32_cstar_target) movl %eax,%eax /* Construct struct pt_regs on stack */ - pushq_cfi $__USER32_DS /* pt_regs->ss */ - pushq_cfi %r8 /* pt_regs->sp */ - CFI_REL_OFFSET rsp,0 - pushq_cfi %r11 /* pt_regs->flags */ - pushq_cfi $__USER32_CS /* pt_regs->cs */ - pushq_cfi %rcx /* pt_regs->ip */ - CFI_REL_OFFSET rip,0 - pushq_cfi_reg rax /* pt_regs->orig_ax */ - pushq_cfi_reg rdi /* pt_regs->di */ - pushq_cfi_reg rsi /* pt_regs->si */ - pushq_cfi_reg rdx /* pt_regs->dx */ - pushq_cfi_reg rbp /* pt_regs->cx */ + pushq $__USER32_DS /* pt_regs->ss */ + pushq %r8 /* pt_regs->sp */ + pushq %r11 /* pt_regs->flags */ + pushq $__USER32_CS /* pt_regs->cs */ + pushq %rcx /* pt_regs->ip */ + pushq %rax /* pt_regs->orig_ax */ + pushq %rdi /* pt_regs->di */ + pushq %rsi /* pt_regs->si */ + pushq %rdx /* pt_regs->dx */ + pushq %rbp /* pt_regs->cx */ movl %ebp,%ecx - pushq_cfi $-ENOSYS /* pt_regs->ax */ + pushq $-ENOSYS /* pt_regs->ax */ sub $(10*8),%rsp /* pt_regs->r8-11,bp,bx,r12-15 not saved */ - CFI_ADJUST_CFA_OFFSET 10*8 /* * no need to do an access_ok check here because r8 has been @@ -380,8 +344,8 @@ ENTRY(ia32_cstar_target) ASM_CLAC orl $TS_COMPAT, ASM_THREAD_INFO(TI_status, %rsp, SIZEOF_PTREGS) testl $_TIF_WORK_SYSCALL_ENTRY, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS) - CFI_REMEMBER_STATE jnz cstar_tracesys + cstar_do_call: /* 32bit syscall -> 64bit C ABI argument conversion */ movl %edi,%r8d /* arg5 */ @@ -403,15 +367,12 @@ sysretl_from_sys_call: andl $~TS_COMPAT, ASM_THREAD_INFO(TI_status, %rsp, SIZEOF_PTREGS) RESTORE_RSI_RDI_RDX movl RIP(%rsp),%ecx - CFI_REGISTER rip,rcx movl EFLAGS(%rsp),%r11d - /*CFI_REGISTER rflags,r11*/ xorq %r10,%r10 xorq %r9,%r9 xorq %r8,%r8 TRACE_IRQS_ON movl RSP(%rsp),%esp - CFI_RESTORE rsp /* * 64bit->32bit SYSRET restores eip from ecx, * eflags from r11 (but RF and VM bits are forced to 0), @@ -430,7 +391,6 @@ sysretl_from_sys_call: #ifdef CONFIG_AUDITSYSCALL cstar_auditsys: - CFI_RESTORE_STATE movl %r9d,R9(%rsp) /* register to be clobbered by call */ auditsys_entry_common movl R9(%rsp),%r9d /* reload 6th syscall arg */ @@ -460,7 +420,6 @@ ia32_badarg: ASM_CLAC movq $-EFAULT,%rax jmp ia32_sysret - CFI_ENDPROC /* * Emulated IA32 system calls via int 0x80. @@ -484,15 +443,6 @@ ia32_badarg: */ ENTRY(ia32_syscall) - CFI_STARTPROC32 simple - CFI_SIGNAL_FRAME - CFI_DEF_CFA rsp,5*8 - /*CFI_REL_OFFSET ss,4*8 */ - CFI_REL_OFFSET rsp,3*8 - /*CFI_REL_OFFSET rflags,2*8 */ - /*CFI_REL_OFFSET cs,1*8 */ - CFI_REL_OFFSET rip,0*8 - /* * Interrupts are off on entry. * We do not frame this tiny irq-off block with TRACE_IRQS_OFF/ON, @@ -506,15 +456,14 @@ ENTRY(ia32_syscall) movl %eax,%eax /* Construct struct pt_regs on stack (iret frame is already on stack) */ - pushq_cfi_reg rax /* pt_regs->orig_ax */ - pushq_cfi_reg rdi /* pt_regs->di */ - pushq_cfi_reg rsi /* pt_regs->si */ - pushq_cfi_reg rdx /* pt_regs->dx */ - pushq_cfi_reg rcx /* pt_regs->cx */ - pushq_cfi $-ENOSYS /* pt_regs->ax */ + pushq %rax /* pt_regs->orig_ax */ + pushq %rdi /* pt_regs->di */ + pushq %rsi /* pt_regs->si */ + pushq %rdx /* pt_regs->dx */ + pushq %rcx /* pt_regs->cx */ + pushq $-ENOSYS /* pt_regs->ax */ cld sub $(10*8),%rsp /* pt_regs->r8-11,bp,bx,r12-15 not saved */ - CFI_ADJUST_CFA_OFFSET 10*8 orl $TS_COMPAT, ASM_THREAD_INFO(TI_status, %rsp, SIZEOF_PTREGS) testl $_TIF_WORK_SYSCALL_ENTRY, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS) @@ -544,7 +493,6 @@ ia32_tracesys: LOAD_ARGS32 /* reload args from stack in case ptrace changed it */ RESTORE_EXTRA_REGS jmp ia32_do_call - CFI_ENDPROC END(ia32_syscall) .macro PTREGSCALL label, func @@ -554,8 +502,6 @@ GLOBAL(\label) jmp ia32_ptregs_common .endm - CFI_STARTPROC32 - PTREGSCALL stub32_rt_sigreturn, sys32_rt_sigreturn PTREGSCALL stub32_sigreturn, sys32_sigreturn PTREGSCALL stub32_fork, sys_fork @@ -569,23 +515,8 @@ GLOBAL(stub32_clone) ALIGN ia32_ptregs_common: - CFI_ENDPROC - CFI_STARTPROC32 simple - CFI_SIGNAL_FRAME - CFI_DEF_CFA rsp,SIZEOF_PTREGS - CFI_REL_OFFSET rax,RAX - CFI_REL_OFFSET rcx,RCX - CFI_REL_OFFSET rdx,RDX - CFI_REL_OFFSET rsi,RSI - CFI_REL_OFFSET rdi,RDI - CFI_REL_OFFSET rip,RIP -/* CFI_REL_OFFSET cs,CS*/ -/* CFI_REL_OFFSET rflags,EFLAGS*/ - CFI_REL_OFFSET rsp,RSP -/* CFI_REL_OFFSET ss,SS*/ SAVE_EXTRA_REGS 8 call *%rax RESTORE_EXTRA_REGS 8 ret - CFI_ENDPROC END(ia32_ptregs_common) diff --git a/arch/x86/include/asm/calling.h b/arch/x86/include/asm/calling.h index 1c8b50edb2db..0d76accde45b 100644 --- a/arch/x86/include/asm/calling.h +++ b/arch/x86/include/asm/calling.h @@ -46,8 +46,6 @@ For 32-bit we have the following conventions - kernel is built with */ -#include <asm/dwarf2.h> - #ifdef CONFIG_X86_64 /* @@ -92,27 +90,26 @@ For 32-bit we have the following conventions - kernel is built with .macro ALLOC_PT_GPREGS_ON_STACK addskip=0 subq $15*8+\addskip, %rsp - CFI_ADJUST_CFA_OFFSET 15*8+\addskip .endm .macro SAVE_C_REGS_HELPER offset=0 rax=1 rcx=1 r8910=1 r11=1 .if \r11 - movq_cfi r11, 6*8+\offset + movq %r11, 6*8+\offset(%rsp) .endif .if \r8910 - movq_cfi r10, 7*8+\offset - movq_cfi r9, 8*8+\offset - movq_cfi r8, 9*8+\offset + movq %r10, 7*8+\offset(%rsp) + movq %r9, 8*8+\offset(%rsp) + movq %r8, 9*8+\offset(%rsp) .endif .if \rax - movq_cfi rax, 10*8+\offset + movq %rax, 10*8+\offset(%rsp) .endif .if \rcx - movq_cfi rcx, 11*8+\offset + movq %rcx, 11*8+\offset(%rsp) .endif - movq_cfi rdx, 12*8+\offset - movq_cfi rsi, 13*8+\offset - movq_cfi rdi, 14*8+\offset + movq %rdx, 12*8+\offset(%rsp) + movq %rsi, 13*8+\offset(%rsp) + movq %rdi, 14*8+\offset(%rsp) .endm .macro SAVE_C_REGS offset=0 SAVE_C_REGS_HELPER \offset, 1, 1, 1, 1 @@ -131,24 +128,24 @@ For 32-bit we have the following conventions - kernel is built with .endm .macro SAVE_EXTRA_REGS offset=0 - movq_cfi r15, 0*8+\offset - movq_cfi r14, 1*8+\offset - movq_cfi r13, 2*8+\offset - movq_cfi r12, 3*8+\offset - movq_cfi rbp, 4*8+\offset - movq_cfi rbx, 5*8+\offset + movq %r15, 0*8+\offset(%rsp) + movq %r14, 1*8+\offset(%rsp) + movq %r13, 2*8+\offset(%rsp) + movq %r12, 3*8+\offset(%rsp) + movq %rbp, 4*8+\offset(%rsp) + movq %rbx, 5*8+\offset(%rsp) .endm .macro SAVE_EXTRA_REGS_RBP offset=0 - movq_cfi rbp, 4*8+\offset + movq %rbp, 4*8+\offset(%rsp) .endm .macro RESTORE_EXTRA_REGS offset=0 - movq_cfi_restore 0*8+\offset, r15 - movq_cfi_restore 1*8+\offset, r14 - movq_cfi_restore 2*8+\offset, r13 - movq_cfi_restore 3*8+\offset, r12 - movq_cfi_restore 4*8+\offset, rbp - movq_cfi_restore 5*8+\offset, rbx + movq 0*8+\offset(%rsp), %r15 + movq 1*8+\offset(%rsp), %r14 + movq 2*8+\offset(%rsp), %r13 + movq 3*8+\offset(%rsp), %r12 + movq 4*8+\offset(%rsp), %rbp + movq 5*8+\offset(%rsp), %rbx .endm .macro ZERO_EXTRA_REGS @@ -162,24 +159,24 @@ For 32-bit we have the following conventions - kernel is built with .macro RESTORE_C_REGS_HELPER rstor_rax=1, rstor_rcx=1, rstor_r11=1, rstor_r8910=1, rstor_rdx=1 .if \rstor_r11 - movq_cfi_restore 6*8, r11 + movq 6*8(%rsp), %r11 .endif .if \rstor_r8910 - movq_cfi_restore 7*8, r10 - movq_cfi_restore 8*8, r9 - movq_cfi_restore 9*8, r8 + movq 7*8(%rsp), %r10 + movq 8*8(%rsp), %r9 + movq 9*8(%rsp), %r8 .endif .if \rstor_rax - movq_cfi_restore 10*8, rax + movq 10*8(%rsp), %rax .endif .if \rstor_rcx - movq_cfi_restore 11*8, rcx + movq 11*8(%rsp), %rcx .endif .if \rstor_rdx - movq_cfi_restore 12*8, rdx + movq 12*8(%rsp), %rdx .endif - movq_cfi_restore 13*8, rsi - movq_cfi_restore 14*8, rdi + movq 13*8(%rsp), %rsi + movq 14*8(%rsp), %rdi .endm .macro RESTORE_C_REGS RESTORE_C_REGS_HELPER 1,1,1,1,1 @@ -205,7 +202,6 @@ For 32-bit we have the following conventions - kernel is built with .macro REMOVE_PT_GPREGS_FROM_STACK addskip=0 addq $15*8+\addskip, %rsp - CFI_ADJUST_CFA_OFFSET -(15*8+\addskip) .endm .macro icebp @@ -224,23 +220,23 @@ For 32-bit we have the following conventions - kernel is built with */ .macro SAVE_ALL - pushl_cfi_reg eax - pushl_cfi_reg ebp - pushl_cfi_reg edi - pushl_cfi_reg esi - pushl_cfi_reg edx - pushl_cfi_reg ecx - pushl_cfi_reg ebx + pushl %eax + pushl %ebp + pushl %edi + pushl %esi + pushl %edx + pushl %ecx + pushl %ebx .endm .macro RESTORE_ALL - popl_cfi_reg ebx - popl_cfi_reg ecx - popl_cfi_reg edx - popl_cfi_reg esi - popl_cfi_reg edi - popl_cfi_reg ebp - popl_cfi_reg eax + popl %ebx + popl %ecx + popl %edx + popl %esi + popl %edi + popl %ebp + popl %eax .endm #endif /* CONFIG_X86_64 */ diff --git a/arch/x86/include/asm/dwarf2.h b/arch/x86/include/asm/dwarf2.h deleted file mode 100644 index de1cdaf4d743..000000000000 --- a/arch/x86/include/asm/dwarf2.h +++ /dev/null @@ -1,170 +0,0 @@ -#ifndef _ASM_X86_DWARF2_H -#define _ASM_X86_DWARF2_H - -#ifndef __ASSEMBLY__ -#warning "asm/dwarf2.h should be only included in pure assembly files" -#endif - -/* - * Macros for dwarf2 CFI unwind table entries. - * See "as.info" for details on these pseudo ops. Unfortunately - * they are only supported in very new binutils, so define them - * away for older version. - */ - -#ifdef CONFIG_AS_CFI - -#define CFI_STARTPROC .cfi_startproc -#define CFI_ENDPROC .cfi_endproc -#define CFI_DEF_CFA .cfi_def_cfa -#define CFI_DEF_CFA_REGISTER .cfi_def_cfa_register -#define CFI_DEF_CFA_OFFSET .cfi_def_cfa_offset -#define CFI_ADJUST_CFA_OFFSET .cfi_adjust_cfa_offset -#define CFI_OFFSET .cfi_offset -#define CFI_REL_OFFSET .cfi_rel_offset -#define CFI_REGISTER .cfi_register -#define CFI_RESTORE .cfi_restore -#define CFI_REMEMBER_STATE .cfi_remember_state -#define CFI_RESTORE_STATE .cfi_restore_state -#define CFI_UNDEFINED .cfi_undefined -#define CFI_ESCAPE .cfi_escape - -#ifdef CONFIG_AS_CFI_SIGNAL_FRAME -#define CFI_SIGNAL_FRAME .cfi_signal_frame -#else -#define CFI_SIGNAL_FRAME -#endif - -#if defined(CONFIG_AS_CFI_SECTIONS) && defined(__ASSEMBLY__) - /* - * Emit CFI data in .debug_frame sections, not .eh_frame sections. - * The latter we currently just discard since we don't do DWARF - * unwinding at runtime. So only the offline DWARF information is - * useful to anyone. Note we should not use this directive if this - * file is used in the vDSO assembly, or if vmlinux.lds.S gets - * changed so it doesn't discard .eh_frame. - */ - .cfi_sections .debug_frame -#endif - -#else - -/* - * Due to the structure of pre-exisiting code, don't use assembler line - * comment character # to ignore the arguments. Instead, use a dummy macro. - */ -.macro cfi_ignore a=0, b=0, c=0, d=0 -.endm - -#define CFI_STARTPROC cfi_ignore -#define CFI_ENDPROC cfi_ignore -#define CFI_DEF_CFA cfi_ignore -#define CFI_DEF_CFA_REGISTER cfi_ignore -#define CFI_DEF_CFA_OFFSET cfi_ignore -#define CFI_ADJUST_CFA_OFFSET cfi_ignore -#define CFI_OFFSET cfi_ignore -#define CFI_REL_OFFSET cfi_ignore -#define CFI_REGISTER cfi_ignore -#define CFI_RESTORE cfi_ignore -#define CFI_REMEMBER_STATE cfi_ignore -#define CFI_RESTORE_STATE cfi_ignore -#define CFI_UNDEFINED cfi_ignore -#define CFI_ESCAPE cfi_ignore -#define CFI_SIGNAL_FRAME cfi_ignore - -#endif - -/* - * An attempt to make CFI annotations more or less - * correct and shorter. It is implied that you know - * what you're doing if you use them. - */ -#ifdef __ASSEMBLY__ -#ifdef CONFIG_X86_64 - .macro pushq_cfi reg - pushq \reg - CFI_ADJUST_CFA_OFFSET 8 - .endm - - .macro pushq_cfi_reg reg - pushq %\reg - CFI_ADJUST_CFA_OFFSET 8 - CFI_REL_OFFSET \reg, 0 - .endm - - .macro popq_cfi reg - popq \reg - CFI_ADJUST_CFA_OFFSET -8 - .endm - - .macro popq_cfi_reg reg - popq %\reg - CFI_ADJUST_CFA_OFFSET -8 - CFI_RESTORE \reg - .endm - - .macro pushfq_cfi - pushfq - CFI_ADJUST_CFA_OFFSET 8 - .endm - - .macro popfq_cfi - popfq - CFI_ADJUST_CFA_OFFSET -8 - .endm - - .macro movq_cfi reg offset=0 - movq %\reg, \offset(%rsp) - CFI_REL_OFFSET \reg, \offset - .endm - - .macro movq_cfi_restore offset reg - movq \offset(%rsp), %\reg - CFI_RESTORE \reg - .endm -#else /*!CONFIG_X86_64*/ - .macro pushl_cfi reg - pushl \reg - CFI_ADJUST_CFA_OFFSET 4 - .endm - - .macro pushl_cfi_reg reg - pushl %\reg - CFI_ADJUST_CFA_OFFSET 4 - CFI_REL_OFFSET \reg, 0 - .endm - - .macro popl_cfi reg - popl \reg - CFI_ADJUST_CFA_OFFSET -4 - .endm - - .macro popl_cfi_reg reg - popl %\reg - CFI_ADJUST_CFA_OFFSET -4 - CFI_RESTORE \reg - .endm - - .macro pushfl_cfi - pushfl - CFI_ADJUST_CFA_OFFSET 4 - .endm - - .macro popfl_cfi - popfl - CFI_ADJUST_CFA_OFFSET -4 - .endm - - .macro movl_cfi reg offset=0 - movl %\reg, \offset(%esp) - CFI_REL_OFFSET \reg, \offset - .endm - - .macro movl_cfi_restore offset reg - movl \offset(%esp), %\reg - CFI_RESTORE \reg - .endm -#endif /*!CONFIG_X86_64*/ -#endif /*__ASSEMBLY__*/ - -#endif /* _ASM_X86_DWARF2_H */ diff --git a/arch/x86/include/asm/frame.h b/arch/x86/include/asm/frame.h index 3b629f47eb65..793179cf8e21 100644 --- a/arch/x86/include/asm/frame.h +++ b/arch/x86/include/asm/frame.h @@ -1,20 +1,17 @@ #ifdef __ASSEMBLY__ #include <asm/asm.h> -#include <asm/dwarf2.h> /* The annotation hides the frame from the unwinder and makes it look like a ordinary ebp save/restore. This avoids some special cases for frame pointer later */ #ifdef CONFIG_FRAME_POINTER .macro FRAME - __ASM_SIZE(push,_cfi) %__ASM_REG(bp) - CFI_REL_OFFSET __ASM_REG(bp), 0 + __ASM_SIZE(push,) %__ASM_REG(bp) __ASM_SIZE(mov) %__ASM_REG(sp), %__ASM_REG(bp) .endm .macro ENDFRAME - __ASM_SIZE(pop,_cfi) %__ASM_REG(bp) - CFI_RESTORE __ASM_REG(bp) + __ASM_SIZE(pop,) %__ASM_REG(bp) .endm #else .macro FRAME diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S index 1c309763e321..0ac73de925d1 100644 --- a/arch/x86/kernel/entry_32.S +++ b/arch/x86/kernel/entry_32.S @@ -50,7 +50,6 @@ #include <asm/smp.h> #include <asm/page_types.h> #include <asm/percpu.h> -#include <asm/dwarf2.h> #include <asm/processor-flags.h> #include <asm/ftrace.h> #include <asm/irq_vectors.h> @@ -113,11 +112,10 @@ /* unfortunately push/pop can't be no-op */ .macro PUSH_GS - pushl_cfi $0 + pushl $0 .endm .macro POP_GS pop=0 addl $(4 + \pop), %esp - CFI_ADJUST_CFA_OFFSET -(4 + \pop) .endm .macro POP_GS_EX .endm @@ -137,16 +135,13 @@ #else /* CONFIG_X86_32_LAZY_GS */ .macro PUSH_GS - pushl_cfi %gs - /*CFI_REL_OFFSET gs, 0*/ + pushl %gs .endm .macro POP_GS pop=0 -98: popl_cfi %gs - /*CFI_RESTORE gs*/ +98: popl %gs .if \pop <> 0 add $\pop, %esp - CFI_ADJUST_CFA_OFFSET -\pop .endif .endm .macro POP_GS_EX @@ -170,11 +165,9 @@ .macro GS_TO_REG reg movl %gs, \reg - /*CFI_REGISTER gs, \reg*/ .endm .macro REG_TO_PTGS reg movl \reg, PT_GS(%esp) - /*CFI_REL_OFFSET gs, PT_GS*/ .endm .macro SET_KERNEL_GS reg movl $(__KERNEL_STACK_CANARY), \reg @@ -186,26 +179,16 @@ .macro SAVE_ALL cld PUSH_GS - pushl_cfi %fs - /*CFI_REL_OFFSET fs, 0;*/ - pushl_cfi %es - /*CFI_REL_OFFSET es, 0;*/ - pushl_cfi %ds - /*CFI_REL_OFFSET ds, 0;*/ - pushl_cfi %eax - CFI_REL_OFFSET eax, 0 - pushl_cfi %ebp - CFI_REL_OFFSET ebp, 0 - pushl_cfi %edi - CFI_REL_OFFSET edi, 0 - pushl_cfi %esi - CFI_REL_OFFSET esi, 0 - pushl_cfi %edx - CFI_REL_OFFSET edx, 0 - pushl_cfi %ecx - CFI_REL_OFFSET ecx, 0 - pushl_cfi %ebx - CFI_REL_OFFSET ebx, 0 + pushl %fs + pushl %es + pushl %ds + pushl %eax + pushl %ebp + pushl %edi + pushl %esi + pushl %edx + pushl %ecx + pushl %ebx movl $(__USER_DS), %edx movl %edx, %ds movl %edx, %es @@ -215,30 +198,20 @@ .endm .macro RESTORE_INT_REGS - popl_cfi %ebx - CFI_RESTORE ebx - popl_cfi %ecx - CFI_RESTORE ecx - popl_cfi %edx - CFI_RESTORE edx - popl_cfi %esi - CFI_RESTORE esi - popl_cfi %edi - CFI_RESTORE edi - popl_cfi %ebp - CFI_RESTORE ebp - popl_cfi %eax - CFI_RESTORE eax + popl %ebx + popl %ecx + popl %edx + popl %esi + popl %edi + popl %ebp + popl %eax .endm .macro RESTORE_REGS pop=0 RESTORE_INT_REGS -1: popl_cfi %ds - /*CFI_RESTORE ds;*/ -2: popl_cfi %es - /*CFI_RESTORE es;*/ -3: popl_cfi %fs - /*CFI_RESTORE fs;*/ +1: popl %ds +2: popl %es +3: popl %fs POP_GS \pop .pushsection .fixup, "ax" 4: movl $0, (%esp) @@ -254,64 +227,27 @@ POP_GS_EX .endm -.macro RING0_INT_FRAME - CFI_STARTPROC simple - CFI_SIGNAL_FRAME - CFI_DEF_CFA esp, 3*4 - /*CFI_OFFSET cs, -2*4;*/ - CFI_OFFSET eip, -3*4 -.endm - -.macro RING0_EC_FRAME - CFI_STARTPROC simple - CFI_SIGNAL_FRAME - CFI_DEF_CFA esp, 4*4 - /*CFI_OFFSET cs, -2*4;*/ - CFI_OFFSET eip, -3*4 -.endm - -.macro RING0_PTREGS_FRAME - CFI_STARTPROC simple - CFI_SIGNAL_FRAME - CFI_DEF_CFA esp, PT_OLDESP-PT_EBX - /*CFI_OFFSET cs, PT_CS-PT_OLDESP;*/ - CFI_OFFSET eip, PT_EIP-PT_OLDESP - /*CFI_OFFSET es, PT_ES-PT_OLDESP;*/ - /*CFI_OFFSET ds, PT_DS-PT_OLDESP;*/ - CFI_OFFSET eax, PT_EAX-PT_OLDESP - CFI_OFFSET ebp, PT_EBP-PT_OLDESP - CFI_OFFSET edi, PT_EDI-PT_OLDESP - CFI_OFFSET esi, PT_ESI-PT_OLDESP - CFI_OFFSET edx, PT_EDX-PT_OLDESP - CFI_OFFSET ecx, PT_ECX-PT_OLDESP - CFI_OFFSET ebx, PT_EBX-PT_OLDESP -.endm - ENTRY(ret_from_fork) - CFI_STARTPROC - pushl_cfi %eax + pushl %eax call schedule_tail GET_THREAD_INFO(%ebp) - popl_cfi %eax - pushl_cfi $0x0202 # Reset kernel eflags - popfl_cfi + popl %eax + pushl $0x0202 # Reset kernel eflags + popfl jmp syscall_exit - CFI_ENDPROC END(ret_from_fork) ENTRY(ret_from_kernel_thread) - CFI_STARTPROC - pushl_cfi %eax + pushl %eax call schedule_tail GET_THREAD_INFO(%ebp) - popl_cfi %eax - pushl_cfi $0x0202 # Reset kernel eflags - popfl_cfi + popl %eax + pushl $0x0202 # Reset kernel eflags + popfl movl PT_EBP(%esp),%eax call *PT_EBX(%esp) movl $0,PT_EAX(%esp) jmp syscall_exit - CFI_ENDPROC ENDPROC(ret_from_kernel_thread) /* @@ -323,7 +259,6 @@ ENDPROC(ret_from_kernel_thread) # userspace resumption stub bypassing syscall exit tracing ALIGN - RING0_PTREGS_FRAME ret_from_exception: preempt_stop(CLBR_ANY) ret_from_intr: @@ -367,17 +302,12 @@ need_resched: jmp need_resched END(resume_kernel) #endif - CFI_ENDPROC /* SYSENTER_RETURN points to after the "sysenter" instruction in the vsyscall page. See vsyscall-sysentry.S, which defines the symbol. */ # sysenter call handler stub ENTRY(ia32_sysenter_target) - CFI_STARTPROC simple - CFI_SIGNAL_FRAME - CFI_DEF_CFA esp, 0 - CFI_REGISTER esp, ebp movl TSS_sysenter_sp0(%esp),%esp sysenter_past_esp: /* @@ -385,14 +315,11 @@ sysenter_past_esp: * enough kernel state to call TRACE_IRQS_OFF can be called - but * we immediately enable interrupts at that point anyway. */ - pushl_cfi $__USER_DS - /*CFI_REL_OFFSET ss, 0*/ - pushl_cfi %ebp - CFI_REL_OFFSET esp, 0 - pushfl_cfi + pushl $__USER_DS + pushl %ebp + pushfl orl $X86_EFLAGS_IF, (%esp) - pushl_cfi $__USER_CS - /*CFI_REL_OFFSET cs, 0*/ + pushl $__USER_CS /* * Push current_thread_info()->sysenter_return to the stack. * A tiny bit of offset fixup is necessary: TI_sysenter_return @@ -401,10 +328,9 @@ sysenter_past_esp: * TOP_OF_KERNEL_STACK_PADDING takes us to the top of the stack; * and THREAD_SIZE takes us to the bottom. */ - pushl_cfi ((TI_sysenter_return) - THREAD_SIZE + TOP_OF_KERNEL_STACK_PADDING + 4*4)(%esp) - CFI_REL_OFFSET eip, 0 + pushl ((TI_sysenter_return) - THREAD_SIZE + TOP_OF_KERNEL_STACK_PADDING + 4*4)(%esp) - pushl_cfi %eax + pushl %eax SAVE_ALL ENABLE_INTERRUPTS(CLBR_NONE) @@ -453,11 +379,11 @@ sysenter_audit: /* movl PT_EAX(%esp), %eax already set, syscall number: 1st arg to audit */ movl PT_EBX(%esp), %edx /* ebx/a0: 2nd arg to audit */ /* movl PT_ECX(%esp), %ecx already set, a1: 3nd arg to audit */ - pushl_cfi PT_ESI(%esp) /* a3: 5th arg */ - pushl_cfi PT_EDX+4(%esp) /* a2: 4th arg */ + pushl PT_ESI(%esp) /* a3: 5th arg */ + pushl PT_EDX+4(%esp) /* a2: 4th arg */ call __audit_syscall_entry - popl_cfi %ecx /* get that remapped edx off the stack */ - popl_cfi %ecx /* get that remapped esi off the stack */ + popl %ecx /* get that remapped edx off the stack */ + popl %ecx /* get that remapped esi off the stack */ movl PT_EAX(%esp),%eax /* reload syscall number */ jmp sysenter_do_call @@ -480,7 +406,6 @@ sysexit_audit: jmp sysenter_exit #endif - CFI_ENDPROC .pushsection .fixup,"ax" 2: movl $0,PT_FS(%esp) jmp 1b @@ -491,9 +416,8 @@ ENDPROC(ia32_sysenter_target) # system call handler stub |