diff options
98 files changed, 4535 insertions, 940 deletions
diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio index 7140e8e7313f..a2854dc9a839 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio +++ b/Documentation/ABI/testing/sysfs-bus-iio @@ -2163,3 +2163,19 @@ Contact: linux-iio@vger.kernel.org Description: An example format is 16-bytes, 2-digits-per-byte, HEX-string representing the sensor unique ID number. + +What: /sys/.../events/in_proximity_thresh_either_runningperiod +KernelVersion: 6.6 +Contact: linux-iio@vger.kernel.org +Description: + A running period of time (in seconds) for which + in_proximity_thresh_either_runningcount amount of conditions + must occur before an event is generated. If direction is not + specified then this period applies to both directions. + +What: /sys/.../events/in_proximity_thresh_either_runningcount +KernelVersion: 6.6 +Contact: linux-iio@vger.kernel.org +Description: + Number of conditions that must occur, during a running + period, before an event is generated. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-filter-admv8818 b/Documentation/ABI/testing/sysfs-bus-iio-filter-admv8818 index f6c035752639..31dbb390573f 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio-filter-admv8818 +++ b/Documentation/ABI/testing/sysfs-bus-iio-filter-admv8818 @@ -7,6 +7,8 @@ Description: - auto -> Adjust bandpass filter to track changes in input clock rate. - manual -> disable/unregister the clock rate notifier / input clock tracking. + - bypass -> bypass low pass filter, high pass filter and disable/unregister + the clock rate notifier What: /sys/bus/iio/devices/iio:deviceX/filter_mode KernelVersion: diff --git a/Documentation/devicetree/bindings/iio/adc/allwinner,sun20i-d1-gpadc.yaml b/Documentation/devicetree/bindings/iio/adc/allwinner,sun20i-d1-gpadc.yaml new file mode 100644 index 000000000000..7ef46c90ebc8 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/allwinner,sun20i-d1-gpadc.yaml @@ -0,0 +1,91 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/allwinner,sun20i-d1-gpadc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner D1 General Purpose ADC + +maintainers: + - Maksim Kiselev <bigunclemax@gmail.com> + +properties: + compatible: + enum: + - allwinner,sun20i-d1-gpadc + + "#io-channel-cells": + const: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + clocks: + maxItems: 1 + + interrupts: + maxItems: 1 + + reg: + maxItems: 1 + + resets: + maxItems: 1 + +patternProperties: + "^channel@[0-9a-f]+$": + $ref: adc.yaml + type: object + description: + Represents the internal channels of the ADC. + + properties: + reg: + items: + minimum: 0 + maximum: 15 + + required: + - reg + + unevaluatedProperties: false + +required: + - "#io-channel-cells" + - clocks + - compatible + - interrupts + - reg + - resets + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/sun20i-d1-ccu.h> + #include <dt-bindings/reset/sun20i-d1-ccu.h> + #include <dt-bindings/interrupt-controller/irq.h> + + gpadc: adc@2009000 { + compatible = "allwinner,sun20i-d1-gpadc"; + reg = <0x2009000 0x400>; + clocks = <&ccu CLK_BUS_GPADC>; + resets = <&ccu RST_BUS_GPADC>; + interrupts = <73 IRQ_TYPE_LEVEL_HIGH>; + #io-channel-cells = <1>; + + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0>; + }; + + channel@1 { + reg = <1>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml index 2127d639a768..e004659099c1 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml +++ b/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml @@ -78,9 +78,9 @@ patternProperties: ti,datarate: $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 - maximum: 6 + maximum: 7 description: | - Data acquisition rate in samples per second + Data acquisition rate in samples per second for ADS1015, TLA2024 0: 128 1: 250 2: 490 @@ -88,6 +88,17 @@ patternProperties: 4: 1600 (default) 5: 2400 6: 3300 + 7: 3300 + + Data acquisition rate in samples per second for ADS1115 + 0: 8 + 1: 16 + 2: 32 + 3: 64 + 4: 128 (default) + 5: 250 + 6: 475 + 7: 860 required: - reg diff --git a/Documentation/devicetree/bindings/iio/dac/microchip,mcp4728.yaml b/Documentation/devicetree/bindings/iio/dac/microchip,mcp4728.yaml new file mode 100644 index 000000000000..99831d7f1c16 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/dac/microchip,mcp4728.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- + +$id: http://devicetree.org/schemas/iio/dac/microchip,mcp4728.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip MCP4728 DAC + +maintainers: + - Andrea Collamati <andrea.collamati@gmail.com> + +description: | + MCP4728 is a quad channel, 12-bit voltage output + Digital-to-Analog Converter with non-volatile + memory and I2C compatible Serial Interface. + https://www.microchip.com/en-us/product/mcp4728 + +properties: + compatible: + const: microchip,mcp4728 + + reg: + maxItems: 1 + + vdd-supply: + description: | + Provides both power and acts as the reference supply on the MCP4728 + when Internal Vref is not selected. + +required: + - compatible + - reg + - vdd-supply + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + dac@60 { + compatible = "microchip,mcp4728"; + reg = <0x60>; + vdd-supply = <&vdac_vdd>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/frequency/adi,admv1013.yaml b/Documentation/devicetree/bindings/iio/frequency/adi,admv1013.yaml index fc813bcb6532..f2eb2287ed9e 100644 --- a/ |