diff options
80 files changed, 2527 insertions, 1178 deletions
diff --git a/Documentation/ABI/testing/sysfs-bus-pci b/Documentation/ABI/testing/sysfs-bus-pci index ecf47559f495..7f63c7e97773 100644 --- a/Documentation/ABI/testing/sysfs-bus-pci +++ b/Documentation/ABI/testing/sysfs-bus-pci @@ -500,3 +500,75 @@ Description: console drivers from the device. Raw users of pci-sysfs resourceN attributes must be terminated prior to resizing. Success of the resizing operation is not guaranteed. + +What: /sys/bus/pci/devices/.../leds/*:enclosure:*/brightness +What: /sys/class/leds/*:enclosure:*/brightness +Date: August 2024 +KernelVersion: 6.12 +Description: + LED indications on PCIe storage enclosures which are controlled + through the NPEM interface (Native PCIe Enclosure Management, + PCIe r6.1 sec 6.28) are accessible as led class devices, both + below /sys/class/leds and below NPEM-capable PCI devices. + + Although these led class devices could be manipulated manually, + in practice they are typically manipulated automatically by an + application such as ledmon(8). + + The name of a led class device is as follows: + <bdf>:enclosure:<indication> + where: + + - <bdf> is the domain, bus, device and function number + (e.g. 10000:02:05.0) + - <indication> is a short description of the LED indication + + Valid indications per PCIe r6.1 table 6-27 are: + + - ok (drive is functioning normally) + - locate (drive is being identified by an admin) + - fail (drive is not functioning properly) + - rebuild (drive is part of an array that is rebuilding) + - pfa (drive is predicted to fail soon) + - hotspare (drive is marked to be used as a replacement) + - ica (drive is part of an array that is degraded) + - ifa (drive is part of an array that is failed) + - idt (drive is not the right type for the connector) + - disabled (drive is disabled, removal is safe) + - specific0 to specific7 (enclosure-specific indications) + + Broadly, the indications fall into one of these categories: + + - to signify drive state (ok, locate, fail, idt, disabled) + - to signify drive role or state in a software RAID array + (rebuild, pfa, hotspare, ica, ifa) + - to signify any other role or state (specific0 to specific7) + + Mandatory indications per PCIe r6.1 sec 7.9.19.2 comprise: + ok, locate, fail, rebuild. All others are optional. + A led class device is only visible if the corresponding + indication is supported by the device. + + To manipulate the indications, write 0 (LED_OFF) or 1 (LED_ON) + to the "brightness" file. Note that manipulating an indication + may implicitly manipulate other indications at the vendor's + discretion. E.g. when the user lights up the "ok" indication, + the vendor may choose to automatically turn off the "fail" + indication. The current state of an indication can be + retrieved by reading its "brightness" file. + + The PCIe Base Specification allows vendors leeway to choose + different colors or blinking patterns for the indications, + but they typically follow the IBPI standard. E.g. the "locate" + indication is usually presented as one or two LEDs blinking at + 4 Hz frequency: + https://en.wikipedia.org/wiki/International_Blinking_Pattern_Interpretation + + PCI Firmware Specification r3.3 sec 4.7 defines a DSM interface + to facilitate shared access by operating system and platform + firmware to a device's NPEM registers. The kernel will use + this DSM interface where available, instead of accessing NPEM + registers directly. The DSM interface does not support the + enclosure-specific indications "specific0" to "specific7", + hence the corresponding led class devices are unavailable if + the DSM interface is used. diff --git a/Documentation/devicetree/bindings/pci/altera-pcie-msi.txt b/Documentation/devicetree/bindings/pci/altera-pcie-msi.txt deleted file mode 100644 index 9514c327d31b..000000000000 --- a/Documentation/devicetree/bindings/pci/altera-pcie-msi.txt +++ /dev/null @@ -1,27 +0,0 @@ -* Altera PCIe MSI controller - -Required properties: -- compatible: should contain "altr,msi-1.0" -- reg: specifies the physical base address of the controller and - the length of the memory mapped region. -- reg-names: must include the following entries: - "csr": CSR registers - "vector_slave": vectors slave port region -- interrupts: specifies the interrupt source of the parent interrupt - controller. The format of the interrupt specifier depends on the - parent interrupt controller. -- num-vectors: number of vectors, range 1 to 32. -- msi-controller: indicates that this is MSI controller node - - -Example -msi0: msi@0xFF200000 { - compatible = "altr,msi-1.0"; - reg = <0xFF200000 0x00000010 - 0xFF200010 0x00000080>; - reg-names = "csr", "vector_slave"; - interrupt-parent = <&hps_0_arm_gic_0>; - interrupts = <0 42 4>; - msi-controller; - num-vectors = <32>; -}; diff --git a/Documentation/devicetree/bindings/pci/altera-pcie.txt b/Documentation/devicetree/bindings/pci/altera-pcie.txt deleted file mode 100644 index 816b244a221e..000000000000 --- a/Documentation/devicetree/bindings/pci/altera-pcie.txt +++ /dev/null @@ -1,50 +0,0 @@ -* Altera PCIe controller - -Required properties: -- compatible : should contain "altr,pcie-root-port-1.0" or "altr,pcie-root-port-2.0" -- reg: a list of physical base address and length for TXS and CRA. - For "altr,pcie-root-port-2.0", additional HIP base address and length. -- reg-names: must include the following entries: - "Txs": TX slave port region - "Cra": Control register access region - "Hip": Hard IP region (if "altr,pcie-root-port-2.0") -- interrupts: specifies the interrupt source of the parent interrupt - controller. The format of the interrupt specifier depends - on the parent interrupt controller. -- device_type: must be "pci" -- #address-cells: set to <3> -- #size-cells: set to <2> -- #interrupt-cells: set to <1> -- ranges: describes the translation of addresses for root ports and - standard PCI regions. -- interrupt-map-mask and interrupt-map: standard PCI properties to define the - mapping of the PCIe interface to interrupt numbers. - -Optional properties: -- msi-parent: Link to the hardware entity that serves as the MSI controller - for this PCIe controller. -- bus-range: PCI bus numbers covered - -Example - pcie_0: pcie@c00000000 { - compatible = "altr,pcie-root-port-1.0"; - reg = <0xc0000000 0x20000000>, - <0xff220000 0x00004000>; - reg-names = "Txs", "Cra"; - interrupt-parent = <&hps_0_arm_gic_0>; - interrupts = <0 40 4>; - interrupt-controller; - #interrupt-cells = <1>; - bus-range = <0x0 0xFF>; - device_type = "pci"; - msi-parent = <&msi_to_gic_gen_0>; - #address-cells = <3>; - #size-cells = <2>; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &pcie_0 1>, - <0 0 0 2 &pcie_0 2>, - <0 0 0 3 &pcie_0 3>, - <0 0 0 4 &pcie_0 4>; - ranges = <0x82000000 0x00000000 0x00000000 0xc0000000 0x00000000 0x10000000 - 0x82000000 0x00000000 0x10000000 0xd0000000 0x00000000 0x10000000>; - }; diff --git a/Documentation/devicetree/bindings/pci/altr,msi-controller.yaml b/Documentation/devicetree/bindings/pci/altr,msi-controller.yaml new file mode 100644 index 000000000000..98814862d006 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/altr,msi-controller.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright (C) 2015, 2024, Intel Corporation +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/altr,msi-controller.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Altera PCIe MSI controller + +maintainers: + - Matthew Gerlach <matthew.gerlach@linux.intel.com> + +properties: + compatible: + enum: + - altr,msi-1.0 + + reg: + items: + - description: CSR registers + - description: Vectors slave port region + + reg-names: + items: + - const: csr + - const: vector_slave + + interrupts: + maxItems: 1 + + msi-controller: true + + num-vectors: + description: number of vectors + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 32 + +required: + - compatible + - reg + - reg-names + - interrupts + - msi-controller + - num-vectors + +allOf: + - $ref: /schemas/interrupt-controller/msi-controller.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + msi@ff200000 { + compatible = "altr,msi-1.0"; + reg = <0xff200000 0x00000010>, + <0xff200010 0x00000080>; + reg-names = "csr", "vector_slave"; + interrupt-parent = <&hps_0_arm_gic_0>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + msi-controller; + num-vectors = <32>; + }; diff --git a/Documentation/devicetree/bindings/pci/altr,pcie-root-port.yaml b/Documentation/devicetree/bindings/pci/altr,pcie-root-port.yaml new file mode 100644 index 000000000000..52533fccc134 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/altr,pcie-root-port.yaml @@ -0,0 +1,114 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright (C) 2015, 2019, 2024, Intel Corporation +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/altr,pcie-root-port.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Altera PCIe Root Port + +maintainers: + - Matthew Gerlach <matthew.gerlach@linux.intel.com> + +properties: + compatible: + enum: + - altr,pcie-root-port-1.0 + - altr,pcie-root-port-2.0 + + reg: + items: + - description: TX slave port region + - description: Control register access region + - description: Hard IP region + minItems: 2 + + reg-names: + items: + - const: Txs + - const: Cra + - const: Hip + minItems: 2 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + interrupt-map-mask: + items: + - const: 0 + - const: 0 + - const: 0 + - const: 7 + + interrupt-map: + maxItems: 4 + + "#interrupt-cells": + const: 1 + + msi-parent: true + +required: + - compatible + - reg + - reg-names + - interrupts + - "#interrupt-cells" + - interrupt-controller + - interrupt-map + - interrupt-map-mask + +allOf: + - $ref: /schemas/pci/pci-host-bridge.yaml# + - if: + properties: + compatible: + enum: + - altr,pcie-root-port-1.0 + then: + properties: + reg: + maxItems: 2 + + reg-names: + maxItems: 2 + + else: + properties: + reg: + minItems: 3 + + reg-names: + minItems: 3 + + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + pcie_0: pcie@c00000000 { + compatible = "altr,pcie-root-port-1.0"; + reg = <0xc0000000 0x20000000>, + <0xff220000 0x00004000>; + reg-names = "Txs", "Cra"; + interrupt-parent = <&hps_0_arm_gic_0>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + bus-range = <0x0 0xff>; + device_type = "pci"; + msi-parent = <&msi_to_gic_gen_0>; + #address-cells = <3>; + #size-cells = <2>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_0 0 0 0 1>, + <0 0 0 2 &pcie_0 0 0 0 2>, + <0 0 0 3 &pcie_0 0 0 0 3>, + <0 0 0 4 &pcie_0 0 0 0 4>; + ranges = <0x82000000 0x00000000 0x00000000 0xc0000000 0x00000000 0x10000000>, + <0x82000000 0x00000000 0x10000000 0xd0000000 0x00000000 0x10000000>; + }; diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml index 11f8ea33240c..0925c520195a 100644 --- a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml |