diff options
97 files changed, 3353 insertions, 3197 deletions
diff --git a/Documentation/devicetree/bindings/serial/8250.yaml b/Documentation/devicetree/bindings/serial/8250.yaml index 5f6b113d378f..6258f5f59b19 100644 --- a/Documentation/devicetree/bindings/serial/8250.yaml +++ b/Documentation/devicetree/bindings/serial/8250.yaml @@ -62,6 +62,7 @@ properties: - const: mrvl,pxa-uart - const: nuvoton,wpcm450-uart - const: nuvoton,npcm750-uart + - const: nuvoton,npcm845-uart - const: nvidia,tegra20-uart - const: nxp,lpc3220-uart - items: diff --git a/Documentation/devicetree/bindings/serial/mediatek,uart.yaml b/Documentation/devicetree/bindings/serial/mediatek,uart.yaml new file mode 100644 index 000000000000..4ff27d6d4d5b --- /dev/null +++ b/Documentation/devicetree/bindings/serial/mediatek,uart.yaml @@ -0,0 +1,120 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/serial/mediatek,uart.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek Universal Asynchronous Receiver/Transmitter (UART) + +maintainers: + - Matthias Brugger <matthias.bgg@gmail.com> + +allOf: + - $ref: serial.yaml# + +description: | + The MediaTek UART is based on the basic 8250 UART and compatible + with 16550A, with enhancements for high speed baud rates and + support for DMA. + +properties: + compatible: + oneOf: + - const: mediatek,mt6577-uart + - items: + - enum: + - mediatek,mt2701-uart + - mediatek,mt2712-uart + - mediatek,mt6580-uart + - mediatek,mt6582-uart + - mediatek,mt6589-uart + - mediatek,mt6755-uart + - mediatek,mt6765-uart + - mediatek,mt6779-uart + - mediatek,mt6795-uart + - mediatek,mt6797-uart + - mediatek,mt7622-uart + - mediatek,mt7623-uart + - mediatek,mt7629-uart + - mediatek,mt7986-uart + - mediatek,mt8127-uart + - mediatek,mt8135-uart + - mediatek,mt8173-uart + - mediatek,mt8183-uart + - mediatek,mt8186-uart + - mediatek,mt8192-uart + - mediatek,mt8195-uart + - mediatek,mt8516-uart + - const: mediatek,mt6577-uart + + reg: + description: The base address of the UART register bank + maxItems: 1 + + clocks: + minItems: 1 + items: + - description: The clock the baudrate is derived from + - description: The bus clock for register accesses + + clock-names: + minItems: 1 + items: + - const: baud + - const: bus + + dmas: + items: + - description: phandle to TX DMA + - description: phandle to RX DMA + + dma-names: + items: + - const: tx + - const: rx + + interrupts: + minItems: 1 + maxItems: 2 + + interrupt-names: + description: + The UART interrupt and optionally the RX in-band wakeup interrupt. + minItems: 1 + items: + - const: uart + - const: wakeup + + pinctrl-0: true + pinctrl-1: true + + pinctrl-names: + minItems: 1 + items: + - const: default + - const: sleep + +required: + - compatible + - reg + - clocks + - interrupts + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + serial@11006000 { + compatible = "mediatek,mt6589-uart", "mediatek,mt6577-uart"; + reg = <0x11006000 0x400>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 52 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "uart", "wakeup"; + clocks = <&uart_clk>, <&bus_clk>; + clock-names = "baud", "bus"; + pinctrl-0 = <&uart_pin>; + pinctrl-1 = <&uart_pin_sleep>; + pinctrl-names = "default", "sleep"; + }; diff --git a/Documentation/devicetree/bindings/serial/mtk-uart.txt b/Documentation/devicetree/bindings/serial/mtk-uart.txt deleted file mode 100644 index 113b5d6a2245..000000000000 --- a/Documentation/devicetree/bindings/serial/mtk-uart.txt +++ /dev/null @@ -1,59 +0,0 @@ -* MediaTek Universal Asynchronous Receiver/Transmitter (UART) - -Required properties: -- compatible should contain: - * "mediatek,mt2701-uart" for MT2701 compatible UARTS - * "mediatek,mt2712-uart" for MT2712 compatible UARTS - * "mediatek,mt6580-uart" for MT6580 compatible UARTS - * "mediatek,mt6582-uart" for MT6582 compatible UARTS - * "mediatek,mt6589-uart" for MT6589 compatible UARTS - * "mediatek,mt6755-uart" for MT6755 compatible UARTS - * "mediatek,mt6765-uart" for MT6765 compatible UARTS - * "mediatek,mt6779-uart" for MT6779 compatible UARTS - * "mediatek,mt6795-uart" for MT6795 compatible UARTS - * "mediatek,mt6797-uart" for MT6797 compatible UARTS - * "mediatek,mt7622-uart" for MT7622 compatible UARTS - * "mediatek,mt7623-uart" for MT7623 compatible UARTS - * "mediatek,mt7629-uart" for MT7629 compatible UARTS - * "mediatek,mt7986-uart", "mediatek,mt6577-uart" for MT7986 compatible UARTS - * "mediatek,mt8127-uart" for MT8127 compatible UARTS - * "mediatek,mt8135-uart" for MT8135 compatible UARTS - * "mediatek,mt8173-uart" for MT8173 compatible UARTS - * "mediatek,mt8183-uart", "mediatek,mt6577-uart" for MT8183 compatible UARTS - * "mediatek,mt8186-uart", "mediatek,mt6577-uart" for MT8183 compatible UARTS - * "mediatek,mt8192-uart", "mediatek,mt6577-uart" for MT8192 compatible UARTS - * "mediatek,mt8195-uart", "mediatek,mt6577-uart" for MT8195 compatible UARTS - * "mediatek,mt8516-uart" for MT8516 compatible UARTS - * "mediatek,mt6577-uart" for MT6577 and all of the above - -- reg: The base address of the UART register bank. - -- interrupts: - index 0: an interrupt specifier for the UART controller itself - index 1: optional, an interrupt specifier with edge sensitivity on Rx pin to - support Rx in-band wake up. If one would like to use this feature, - one must create an addtional pinctrl to reconfigure Rx pin to normal - GPIO before suspend. - -- clocks : Must contain an entry for each entry in clock-names. - See ../clocks/clock-bindings.txt for details. -- clock-names: - - "baud": The clock the baudrate is derived from - - "bus": The bus clock for register accesses (optional) - -For compatibility with older device trees an unnamed clock is used for the -baud clock if the baudclk does not exist. Do not use this for new designs. - -Example: - - uart0: serial@11006000 { - compatible = "mediatek,mt6589-uart", "mediatek,mt6577-uart"; - reg = <0x11006000 0x400>; - interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>, - <GIC_SPI 52 IRQ_TYPE_EDGE_FALLING>; - clocks = <&uart_clk>, <&bus_clk>; - clock-names = "baud", "bus"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&uart_pin>; - pinctrl-1 = <&uart_pin_sleep>; - }; diff --git a/Documentation/devicetree/bindings/serial/renesas,hscif.yaml b/Documentation/devicetree/bindings/serial/renesas,hscif.yaml index 87180d95cd4c..1957b9d782e8 100644 --- a/Documentation/devicetree/bindings/serial/renesas,hscif.yaml +++ b/Documentation/devicetree/bindings/serial/renesas,hscif.yaml @@ -57,6 +57,7 @@ properties: - items: - enum: - renesas,hscif-r8a779a0 # R-Car V3U + - renesas,hscif-r8a779f0 # R-Car S4-8 - renesas,hscif-r8a779g0 # R-Car V4H - const: renesas,rcar-gen4-hscif # R-Car Gen4 - const: renesas,hscif # generic HSCIF compatible UART diff --git a/Documentation/devicetree/bindings/serial/rs485.yaml b/Documentation/devicetree/bindings/serial/rs485.yaml index f2c9c9fe6aa7..90a1bab40f05 100644 --- a/Documentation/devicetree/bindings/serial/rs485.yaml +++ b/Documentation/devicetree/bindings/serial/rs485.yaml @@ -22,12 +22,12 @@ properties: - description: Delay between rts signal and beginning of data sent in milliseconds. It corresponds to the delay before sending data. default: 0 - maximum: 1000 + maximum: 100 - description: Delay between end of data sent and rts signal in milliseconds. It corresponds to the delay after sending data and actual release of the line. default: 0 - maximum: 1000 + maximum: 100 rs485-rts-active-low: description: drive RTS low when sending (default is high). diff --git a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml index 12137fe80acf..dc74643ae72e 100644 --- a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml +++ b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml @@ -33,7 +33,9 @@ properties: - rockchip,rk3368-uart - rockchip,rk3399-uart - rockchip,rk3568-uart + - rockchip,rk3588-uart - rockchip,rv1108-uart + - rockchip,rv1126-uart - const: snps,dw-apb-uart - items: - enum: diff --git a/Documentation/driver-api/serial/driver.rst b/Documentation/driver-api/serial/driver.rst index 7ef83fd3917b..23c6b956cd90 100644 --- a/Documentation/driver-api/serial/driver.rst +++ b/Documentation/driver-api/serial/driver.rst @@ -25,10 +25,10 @@ Console Support --------------- The serial core provides a few helper functions. This includes identifing -the correct port structure (via uart_get_console) and decoding command line -arguments (uart_parse_options). +the correct port structure (via uart_get_console()) and decoding command line +arguments (uart_parse_options()). -There is also a helper function (uart_console_write) which performs a +There is also a helper function (uart_console_write()) which performs a character by character write, translating newlines to CRLF sequences. Driver writers are recommended to use this function rather than implementing their own version. @@ -39,7 +39,7 @@ Locking It is the responsibility of the low level hardware driver to perform the necessary locking using port->lock. There are some exceptions (which -are described in the uart_ops listing below.) +are described in the struct uart_ops listing below.) There are two locks. A per-port spinlock, and an overall semaphore. @@ -63,442 +63,20 @@ commonly referred to as the port mutex. uart_ops -------- -The uart_ops structure is the main interface between serial_core and the -hardware specific driver. It contains all the methods to control the -hardware. - - tx_empty(port) - This function tests whether the transmitter fifo and shifter - for the port described by 'port' is empty. If it is empty, - this function should return TIOCSER_TEMT, otherwise return 0. - If the port does not support this operation, then it should - return TIOCSER_TEMT. - - Locking: none. - - Interrupts: caller dependent. - - This call must not sleep - |