diff options
52 files changed, 72 insertions, 90 deletions
diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu index 6943133afcb8..9c978dcae07d 100644 --- a/Documentation/ABI/testing/sysfs-devices-system-cpu +++ b/Documentation/ABI/testing/sysfs-devices-system-cpu @@ -67,20 +67,6 @@ Description: Discover NUMA node a CPU belongs to /sys/devices/system/cpu/cpu42/node2 -> ../../node/node2 -What: /sys/devices/system/cpu/cpu#/node -Date: October 2009 -Contact: Linux memory management mailing list <linux-mm@kvack.org> -Description: Discover NUMA node a CPU belongs to - - When CONFIG_NUMA is enabled, a symbolic link that points - to the corresponding NUMA node directory. - - For example, the following symlink is created for cpu42 - in NUMA node 2: - - /sys/devices/system/cpu/cpu42/node2 -> ../../node/node2 - - What: /sys/devices/system/cpu/cpu#/topology/core_id /sys/devices/system/cpu/cpu#/topology/core_siblings /sys/devices/system/cpu/cpu#/topology/core_siblings_list diff --git a/Documentation/x86/x86_64/boot-options.txt b/Documentation/x86/x86_64/boot-options.txt index de38429beb71..e015a83c3996 100644 --- a/Documentation/x86/x86_64/boot-options.txt +++ b/Documentation/x86/x86_64/boot-options.txt @@ -112,10 +112,6 @@ Timing This can be used to work around timing problems on multiprocessor systems with not properly synchronized CPUs. - report_lost_ticks - Report when timer interrupts are lost because some code turned off - interrupts for too long. - nohpet Don't use the HPET timer. diff --git a/arch/h8300/README b/arch/h8300/README index 637f5a02f311..efa805fda19b 100644 --- a/arch/h8300/README +++ b/arch/h8300/README @@ -11,7 +11,7 @@ H8/300H and H8S 2.AE 3068/AE 3069 more information MICROTRONIQUE <http://www.microtronique.com/> - Akizuki Denshi Tsusho Ltd. <http://www.akizuki.ne.jp> (Japanese Only) + Akizuki Denshi Tsusho Ltd. <http://akizukidenshi.com/> (Japanese Only) 3.H8MAX see http://ip-sol.jp/h8max/ (Japanese Only) diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-util.c b/arch/mips/cavium-octeon/executive/cvmx-helper-util.c index 116dea17acf5..dfdfe8bdc9c5 100644 --- a/arch/mips/cavium-octeon/executive/cvmx-helper-util.c +++ b/arch/mips/cavium-octeon/executive/cvmx-helper-util.c @@ -175,7 +175,7 @@ int cvmx_helper_dump_packet(cvmx_wqe_t *work) * Packets will begin slowly dropping when there are less than * this many packet buffers free in FPA 0. * @drop_thresh: - * All incomming packets will be dropped when there are less + * All incoming packets will be dropped when there are less * than this many free packet buffers in FPA 0. * Returns Zero on success. Negative on failure */ @@ -210,7 +210,7 @@ int cvmx_helper_setup_red_queue(int queue, int pass_thresh, int drop_thresh) * Packets will begin slowly dropping when there are less than * this many packet buffers free in FPA 0. * @drop_thresh: - * All incomming packets will be dropped when there are less + * All incoming packets will be dropped when there are less * than this many free packet buffers in FPA 0. * Returns Zero on success. Negative on failure */ diff --git a/arch/mips/include/asm/octeon/cvmx-helper-util.h b/arch/mips/include/asm/octeon/cvmx-helper-util.h index 6a6e52fc22c1..01c8ddd84ff8 100644 --- a/arch/mips/include/asm/octeon/cvmx-helper-util.h +++ b/arch/mips/include/asm/octeon/cvmx-helper-util.h @@ -60,7 +60,7 @@ extern int cvmx_helper_dump_packet(cvmx_wqe_t *work); * Packets will begin slowly dropping when there are less than * this many packet buffers free in FPA 0. * @drop_thresh: - * All incomming packets will be dropped when there are less + * All incoming packets will be dropped when there are less * than this many free packet buffers in FPA 0. * Returns Zero on success. Negative on failure */ @@ -74,7 +74,7 @@ extern int cvmx_helper_setup_red_queue(int queue, int pass_thresh, * Packets will begin slowly dropping when there are less than * this many packet buffers free in FPA 0. * @drop_thresh: - * All incomming packets will be dropped when there are less + * All incoming packets will be dropped when there are less * than this many free packet buffers in FPA 0. * Returns Zero on success. Negative on failure */ diff --git a/arch/powerpc/platforms/85xx/p1022_ds.c b/arch/powerpc/platforms/85xx/p1022_ds.c index 7328b8d74129..e346edf7f157 100644 --- a/arch/powerpc/platforms/85xx/p1022_ds.c +++ b/arch/powerpc/platforms/85xx/p1022_ds.c @@ -215,13 +215,13 @@ static void p1022ds_set_monitor_port(enum fsl_diu_monitor_port port) /* Map the global utilities registers. */ guts_node = of_find_compatible_node(NULL, NULL, "fsl,p1022-guts"); if (!guts_node) { - pr_err("p1022ds: missing global utilties device node\n"); + pr_err("p1022ds: missing global utilities device node\n"); return; } guts = of_iomap(guts_node, 0); if (!guts) { - pr_err("p1022ds: could not map global utilties device\n"); + pr_err("p1022ds: could not map global utilities device\n"); goto exit; } @@ -416,14 +416,14 @@ void p1022ds_set_pixel_clock(unsigned int pixclock) /* Map the global utilities registers. */ guts_np = of_find_compatible_node(NULL, NULL, "fsl,p1022-guts"); if (!guts_np) { - pr_err("p1022ds: missing global utilties device node\n"); + pr_err("p1022ds: missing global utilities device node\n"); return; } guts = of_iomap(guts_np, 0); of_node_put(guts_np); if (!guts) { - pr_err("p1022ds: could not map global utilties device\n"); + pr_err("p1022ds: could not map global utilities device\n"); return; } diff --git a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c index 04d9d317f741..d479d68fbb2b 100644 --- a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c +++ b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c @@ -236,14 +236,14 @@ void mpc8610hpcd_set_pixel_clock(unsigned int pixclock) /* Map the global utilities registers. */ guts_np = of_find_compatible_node(NULL, NULL, "fsl,mpc8610-guts"); if (!guts_np) { - pr_err("mpc8610hpcd: missing global utilties device node\n"); + pr_err("mpc8610hpcd: missing global utilities device node\n"); return; } guts = of_iomap(guts_np, 0); of_node_put(guts_np); if (!guts) { - pr_err("mpc8610hpcd: could not map global utilties device\n"); + pr_err("mpc8610hpcd: could not map global utilities device\n"); return; } diff --git a/arch/x86/kernel/cpu/perf_event_amd_ibs.c b/arch/x86/kernel/cpu/perf_event_amd_ibs.c index 6336bcbd0618..5f0581e713c2 100644 --- a/arch/x86/kernel/cpu/perf_event_amd_ibs.c +++ b/arch/x86/kernel/cpu/perf_event_amd_ibs.c @@ -528,7 +528,7 @@ static int perf_ibs_handle_irq(struct perf_ibs *perf_ibs, struct pt_regs *iregs) if (!test_bit(IBS_STARTED, pcpu->state)) { /* * Catch spurious interrupts after stopping IBS: After - * disabling IBS there could be still incomming NMIs + * disabling IBS there could be still incoming NMIs * with samples that even have the valid bit cleared. * Mark all this NMIs as handled. */ diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig index 5aab1acabf1c..68f172948a31 100644 --- a/arch/xtensa/Kconfig +++ b/arch/xtensa/Kconfig @@ -22,7 +22,7 @@ config XTENSA configurable and extensible. The Linux port to the Xtensa architecture supports all processor configurations and extensions, with reasonable minimum requirements. The Xtensa Linux project has - a home page at <http://xtensa.sourceforge.net/>. + a home page at <http://www.linux-xtensa.org/>. config RWSEM_XCHGADD_ALGORITHM def_bool y diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c index 33c9a44a9678..a8a41e07a221 100644 --- a/drivers/bluetooth/ath3k.c +++ b/drivers/bluetooth/ath3k.c @@ -349,7 +349,7 @@ static int ath3k_load_syscfg(struct usb_device *udev) ret = ath3k_get_state(udev, &fw_state); if (ret < 0) { - BT_ERR("Can't get state to change to load configration err"); + BT_ERR("Can't get state to change to load configuration err"); return -EBUSY; } diff --git a/drivers/devfreq/exynos4_bus.c b/drivers/devfreq/exynos4_bus.c index 46d94e9e95b5..3f37f3b3f268 100644 --- a/drivers/devfreq/exynos4_bus.c +++ b/drivers/devfreq/exynos4_bus.c @@ -658,7 +658,7 @@ static int exynos4_bus_target(struct device *dev, unsigned long *_freq, if (old_freq == freq) return 0; - dev_dbg(dev, "targetting %lukHz %luuV\n", freq, new_oppinfo.volt); + dev_dbg(dev, "targeting %lukHz %luuV\n", freq, new_oppinfo.volt); mutex_lock(&data->lock); diff --git a/drivers/firewire/ohci.c b/drivers/firewire/ohci.c index 6ce6e07c38c1..45912e6e0ac2 100644 --- a/drivers/firewire/ohci.c +++ b/drivers/firewire/ohci.c @@ -329,7 +329,7 @@ module_param_named(quirks, param_quirks, int, 0644); MODULE_PARM_DESC(quirks, "Chip quirks (default = 0" ", nonatomic cycle timer = " __stringify(QUIRK_CYCLE_TIMER) ", reset packet generation = " __stringify(QUIRK_RESET_PACKET) - ", AR/selfID endianess = " __stringify(QUIRK_BE_HEADERS) + ", AR/selfID endianness = " __stringify(QUIRK_BE_HEADERS) ", no 1394a enhancements = " __stringify(QUIRK_NO_1394A) ", disable MSI = " __stringify(QUIRK_NO_MSI) ", TI SLLZ059 erratum = " __stringify(QUIRK_TI_SLLZ059) diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c index 7944d301518a..6fa0fc057d9f 100644 --- a/drivers/gpu/drm/i915/i915_debugfs.c +++ b/drivers/gpu/drm/i915/i915_debugfs.c @@ -1458,7 +1458,7 @@ static const char *swizzle_string(unsigned swizzle) case I915_BIT_6_SWIZZLE_9_10_17: return "bit9/bit10/bit17"; case I915_BIT_6_SWIZZLE_UNKNOWN: - return "unkown"; + return "unknown"; } return "bug"; diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig index e7d6a13ec6a6..eae0c7e468cf 100644 --- a/drivers/hid/Kconfig +++ b/drivers/hid/Kconfig @@ -320,7 +320,7 @@ config HID_LOGITECH_DJ Say Y if you want support for Logitech Unifying receivers and devices. Unifying receivers are capable of pairing up to 6 Logitech compliant devices to the same receiver. Without this driver it will be handled by - generic USB_HID driver and all incomming events will be multiplexed + generic USB_HID driver and all incoming events will be multiplexed into a single mouse and a single keyboard device. config LOGITECH_FF diff --git a/drivers/isdn/hardware/eicon/divacapi.h b/drivers/isdn/hardware/eicon/divacapi.h index 3942efbbfb58..a315a2914d70 100644 --- a/drivers/isdn/hardware/eicon/divacapi.h +++ b/drivers/isdn/hardware/eicon/divacapi.h @@ -422,11 +422,11 @@ struct _DIVA_CAPI_ADAPTER { #define LAPD 6 /* lapd (Q.921) */ #define X25_L2 7 /* x.25 layer-2 */ #define V120_L2 8 /* V.120 layer-2 protocol */ -#define V42_IN 9 /* V.42 layer-2 protocol, incomming */ +#define V42_IN 9 /* V.42 layer-2 protocol, incoming */ #define V42 10 /* V.42 layer-2 protocol */ #define MDM_ATP 11 /* AT Parser built in the L2 */ #define X75_V42BIS 12 /* ISO7776 (X.75 SLP) modified to support V.42 bis compression */ -#define RTPL2_IN 13 /* RTP layer-2 protocol, incomming */ +#define RTPL2_IN 13 /* RTP layer-2 protocol, incoming */ #define RTPL2 14 /* RTP layer-2 protocol */ #define V120_V42BIS 15 /* V.120 layer-2 protocol supporting V.42 bis compression */ @@ -1125,7 +1125,7 @@ extern word li_total_channels; | Direction | word | Enable compression/decompression for | | | | 0: All direction | | | | 1: disable outgoing data | - | | | 2: disable incomming data | + | | | 2: disable incoming data | | | | 3: disable both direction (default) | +---------------------+------+-----------------------------------------+ | Number of code | word | Parameter P1 of V.42bis in accordance | diff --git a/drivers/isdn/hardware/eicon/pc.h b/drivers/isdn/hardware/eicon/pc.h index 889dc984bbca..329c0c26abfb 100644 --- a/drivers/isdn/hardware/eicon/pc.h +++ b/drivers/isdn/hardware/eicon/pc.h @@ -419,11 +419,11 @@ struct dual #define LAPD 6 /* lapd (Q.921) */ #define X25_L2 7 /* x.25 layer-2 */ #define V120_L2 8 /* V.120 layer-2 protocol */ -#define V42_IN 9 /* V.42 layer-2 protocol, incomming */ +#define V42_IN 9 /* V.42 layer-2 protocol, incoming */ #define V42 10 /* V.42 layer-2 protocol */ #define MDM_ATP 11 /* AT Parser built in the L2 */ #define X75_V42BIS 12 /* x.75 with V.42bis */ -#define RTPL2_IN 13 /* RTP layer-2 protocol, incomming */ +#define RTPL2_IN 13 /* RTP layer-2 protocol, incoming */ #define RTPL2 14 /* RTP layer-2 protocol */ #define V120_V42BIS 15 /* V.120 asynchronous mode supporting V.42bis compression */ #define LISTENER 27 /* Layer 2 to listen line */ diff --git a/drivers/isdn/mISDN/l1oip_core.c b/drivers/isdn/mISDN/l1oip_core.c index f8e405c383a0..2c0d2c2bf946 100644 --- a/drivers/isdn/mISDN/l1oip_core.c +++ b/drivers/isdn/mISDN/l1oip_core.c @@ -689,7 +689,7 @@ l1oip_socket_thread(void *data) hc->sin_remote.sin_addr.s_addr = htonl(hc->remoteip); hc->sin_remote.sin_port = htons((unsigned short)hc->remoteport); - /* bind to incomming port */ + /* bind to incoming port */ if (socket->ops->bind(socket, (struct sockaddr *)&hc->sin_local, sizeof(hc->sin_local))) { printk(KERN_ERR "%s: Failed to bind socket to port %d.\n", diff --git a/drivers/media/platform/soc_camera/mx2_camera.c b/drivers/media/platform/soc_camera/mx2_camera.c index 8bda2c908aba..5cc55f333f84 100644 --- a/drivers/media/platform/soc_camera/mx2_camera.c +++ b/drivers/media/platform/soc_camera/mx2_camera.c @@ -345,7 +345,7 @@ static struct mx2_fmt_cfg mx27_emma_prp_table[] = { /* * This is a generic configuration which is valid for most * prp input-output format combinations. - * We set the incomming and outgoing pixelformat to a + * We set the incoming and outgoing pixelformat to a * 16 Bit wide format and adjust the bytesperline * accordingly. With this configuration the inputdata * will not be changed by the emma and could be any type diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 5523da3afcdc..c9ec54730d1d 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -8689,7 +8689,7 @@ static void bnx2x_set_234_gates(struct bnx2x *bp, bool close) (!close) ? (val | HC_CONFIG_0_REG_BLOCK_DISABLE_0) : (val & ~(u32)HC_CONFIG_0_REG_BLOCK_DISABLE_0)); } else { - /* Prevent incomming interrupts in IGU */ + /* Prevent incoming interrupts in IGU */ val = REG_RD(bp, IGU_REG_BLOCK_CONFIGURATION); REG_WR(bp, IGU_REG_BLOCK_CONFIGURATION, diff --git a/drivers/net/ethernet/mellanox/mlx4/en_main.c b/drivers/net/ethernet/mellanox/mlx4/en_main.c index 3a2b8c65642d..8611c89f034d 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_main.c @@ -64,7 +64,7 @@ static const char mlx4_en_version[] = /* Enable RSS UDP traffic */ MLX4_EN_PARM_INT(udp_rss, 1, - "Enable RSS for incomming UDP traffic or disabled (0)"); + "Enable RSS for incoming UDP traffic or disabled (0)"); /* Priority pausing */ MLX4_EN_PARM_INT(pfctx, 0, "Priority based Flow Control policy on TX[7:0]." diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index d833f5927891..b30af2b1cd28 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -916,7 +916,7 @@ static int qlcnic_check_npar_opertional(struct qlcnic_adapter *adapter) } if (!npar_opt_timeo) { dev_err(&adapter->pdev->dev, - "Waiting for NPAR state to opertional timeout\n"); + "Waiting for NPAR state to operational timeout\n"); return -EIO; } return 0; diff --git a/drivers/net/irda/ali-ircc.c b/drivers/net/irda/ali-ircc.c index 84872043b5c6..9cea451a6081 100644 --- a/drivers/net/irda/ali-ircc.c +++ b/drivers/net/irda/ali-ircc.c @@ -993,7 +993,7 @@ static void ali_ircc_change_speed(struct ali_ircc_cb *self, __u32 baud) /* Enable Interuupt */ self->ier = IER_EOM; // benjamin 2000/11/20 07:24PM - /* Be ready for incomming frames */ + /* Be ready for incoming frames */ ali_ircc_dma_receive(self); // benajmin 2000/11/8 07:46PM not complete } /* Go to SIR Speed */ diff --git a/drivers/of/address.c b/drivers/of/address.c index 0125524c08c4..04da786c84d2 100644 --- a/drivers/of/address.c +++ b/drivers/of/address.c @@ -429,7 +429,7 @@ static u64 __of_translate_address(struct device_node *dev, goto bail; bus = of_match_bus(parent); - /* Cound address cells & copy address locally */ + /* Count address cells & copy address locally */ bus->count_cells(dev, &na, &ns); if (!OF_CHECK_COUNTS(na, ns)) { printk(KERN_ERR "prom_parse: Bad cell count for %s\n", diff --git a/drivers/of/platform.c b/drivers/of/platform.c index b80891b43816..e0a6514ab46c 100644 --- a/drivers/of/platform.c +++ b/drivers/of/platform.c @@ -436,6 +436,7 @@ EXPORT_SYMBOL(of_platform_bus_probe); * of_platform_populate() - Populate platform_devices from device tree data * @root: parent of the first level to probe or NULL for the root of the tree * @matches: match table, NULL to use the default + * @lookup: auxdata table for matching id and platform_data with device nodes * @parent: parent to hook devices from, NULL for toplevel * * Similar to of_platform_bus_probe(), this function walks the device tree diff --git a/drivers/pcmcia/rsrc_nonstatic.c b/drivers/pcmcia/rsrc_nonstatic.c index 430a9ac56091..065704c605d5 100644 --- a/drivers/pcmcia/rsrc_nonstatic.c +++ b/drivers/pcmcia/rsrc_nonstatic.c @@ -369,12 +369,12 @@ static int do_validate_mem(struct pcmcia_socket *s, } } - free_region(res2); - free_region(res1); - dev_dbg(&s->dev, "cs: memory probe 0x%06lx-0x%06lx: %p %p %u %u %u", base, base+size-1, res1, res2, ret, info1, info2); + free_region(res2); + free_region(res1); + if ((ret) || (info1 != info2) || (info1 == 0)) return -EINVAL; diff --git a/drivers/rpmsg/virtio_rpmsg_bus.c b/drivers/rpmsg/virtio_rpmsg_bus.c index f1e323924f12..d85446021ddb 100644 --- a/drivers/rpmsg/virtio_rpmsg_bus.c +++ b/drivers/rpmsg/virtio_rpmsg_bus.c @@ -839,7 +839,7 @@ static void rpmsg_recv_done(struct virtqueue *rvq) /* farewell, ept, we don't need you anymore */ kref_put(&ept->refcount, __ept_release); } else - dev_warn(dev, "msg received with no recepient\n"); + dev_warn(dev, "msg received with no recipient\n"); /* publish the real size of the buffer */ sg_init_one(&sg, msg, RPMSG_BUF_SIZE); diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 142f632e2a2e..65e764cb33af 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -883,7 +883,7 @@ config SCSI_IBMVSCSI This is the IBM POWER Virtual SCSI Client To compile this driver as a module, choose M here: the - module will be called ibmvscsic. + module will be called ibmvscsi. config SCSI_IBMVSCSIS tristate "IBM Virtual SCSI Server support" diff --git a/drivers/staging/android/binder.h b/drivers/staging/android/binder.h index 2f7d195d8b15..629372f89658 100644 --- a/drivers/staging/android/binder.h +++ b/drivers/staging/android/binder.h @@ -224,7 +224,7 @@ enum BinderDriverReturnProtocol { BR_SPAWN_LOOPER = _IO('r', 13), /* * No parameters. The driver has determined that a process has no - * threads waiting to service incomming transactions. When a process + * threads waiting to service incoming transactions. When a process * receives this command, it must spawn a new service thread and * register it via bcENTER_LOOPER. */ di |