diff options
46 files changed, 2450 insertions, 1658 deletions
diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml index f80f8896d527..e4cd4a1deae9 100644 --- a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml @@ -18,6 +18,7 @@ properties: compatible: enum: - qcom,ipq8074-qmp-pcie-phy + - qcom,ipq8074-qmp-usb3-phy - qcom,msm8996-qmp-pcie-phy - qcom,msm8996-qmp-ufs-phy - qcom,msm8996-qmp-usb3-phy @@ -161,6 +162,7 @@ allOf: compatible: contains: enum: + - qcom,ipq8074-qmp-usb3-phy - qcom,msm8996-qmp-usb3-phy - qcom,msm8998-qmp-pcie-phy - qcom,msm8998-qmp-usb3-phy diff --git a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml index b5a6195de7ff..9ba62dcb1e5d 100644 --- a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml @@ -18,6 +18,7 @@ properties: oneOf: - items: - enum: + - qcom,ipq8074-qusb2-phy - qcom,msm8996-qusb2-phy - qcom,msm8998-qusb2-phy - items: diff --git a/Documentation/devicetree/bindings/phy/samsung,ufs-phy.yaml b/Documentation/devicetree/bindings/phy/samsung,ufs-phy.yaml new file mode 100644 index 000000000000..636cc501b54f --- /dev/null +++ b/Documentation/devicetree/bindings/phy/samsung,ufs-phy.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/samsung,ufs-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung SoC series UFS PHY Device Tree Bindings + +maintainers: + - Alim Akhtar <alim.akhtar@samsung.com> + +properties: + "#phy-cells": + const: 0 + + compatible: + enum: + - samsung,exynos7-ufs-phy + + reg: + maxItems: 1 + + reg-names: + items: + - const: phy-pma + + clocks: + items: + - description: PLL reference clock + - description: symbol clock for input symbol ( rx0-ch0 symbol clock) + - description: symbol clock for input symbol ( rx1-ch1 symbol clock) + - description: symbol clock for output symbol ( tx0 symbol clock) + + clock-names: + items: + - const: ref_clk + - const: rx1_symbol_clk + - const: rx0_symbol_clk + - const: tx0_symbol_clk + + samsung,pmu-syscon: + $ref: '/schemas/types.yaml#/definitions/phandle' + description: phandle for PMU system controller interface, used to + control pmu registers bits for ufs m-phy + +required: + - "#phy-cells" + - compatible + - reg + - reg-names + - clocks + - clock-names + - samsung,pmu-syscon + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/exynos7-clk.h> + + ufs_phy: ufs-phy@15571800 { + compatible = "samsung,exynos7-ufs-phy"; + reg = <0x15571800 0x240>; + reg-names = "phy-pma"; + samsung,pmu-syscon = <&pmu_system_controller>; + #phy-cells = <0>; + clocks = <&clock_fsys1 SCLK_COMBO_PHY_EMBEDDED_26M>, + <&clock_fsys1 PHYCLK_UFS20_RX1_SYMBOL_USER>, + <&clock_fsys1 PHYCLK_UFS20_RX0_SYMBOL_USER>, + <&clock_fsys1 PHYCLK_UFS20_TX0_SYMBOL_USER>; + clock-names = "ref_clk", "rx1_symbol_clk", + "rx0_symbol_clk", "tx0_symbol_clk"; + + }; +... diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml index f88d36207b87..c871d462c952 100644 --- a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml +++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml @@ -31,12 +31,16 @@ properties: clocks: minItems: 1 - maxItems: 2 + maxItems: 3 clock-names: oneOf: - const: link # for PXs2 - - items: # for PXs3 + - items: # for PXs3 with phy-ext + - const: link + - const: phy + - const: phy-ext + - items: # for others - const: link - const: phy diff --git a/Documentation/devicetree/bindings/phy/xlnx,zynqmp-psgtr.yaml b/Documentation/devicetree/bindings/phy/xlnx,zynqmp-psgtr.yaml new file mode 100644 index 000000000000..04d5654efb38 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/xlnx,zynqmp-psgtr.yaml @@ -0,0 +1,105 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/xlnx,zynqmp-psgtr.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xilinx ZynqMP Gigabit Transceiver PHY Device Tree Bindings + +maintainers: + - Laurent Pinchart <laurent.pinchart@ideasonboard.com> + +description: | + This binding describes the Xilinx ZynqMP Gigabit Transceiver (GTR) PHY. The + GTR provides four lanes and is used by USB, SATA, PCIE, Display port and + Ethernet SGMII controllers. + +properties: + "#phy-cells": + const: 4 + description: | + The cells contain the following arguments. + + - description: The GTR lane + minimum: 0 + maximum: 3 + - description: The PHY type + enum: + - PHY_TYPE_DP + - PHY_TYPE_PCIE + - PHY_TYPE_SATA + - PHY_TYPE_SGMII + - PHY_TYPE_USB + - description: The PHY instance + minimum: 0 + maximum: 1 # for DP, SATA or USB + maximum: 3 # for PCIE or SGMII + - description: The reference clock number + minimum: 0 + maximum: 3 + + compatible: + enum: + - xlnx,zynqmp-psgtr-v1.1 + - xlnx,zynqmp-psgtr + + clocks: + minItems: 1 + maxItems: 4 + description: | + Clock for each PS_MGTREFCLK[0-3] reference clock input. Unconnected + inputs shall not have an entry. + + clock-names: + minItems: 1 + maxItems: 4 + items: + pattern: "^ref[0-3]$" + + reg: + items: + - description: SERDES registers block + - description: SIOU registers block + + reg-names: + items: + - const: serdes + - const: siou + + xlnx,tx-termination-fix: + description: | + Include this for fixing functional issue with the TX termination + resistance in GT, which can be out of spec for the XCZU9EG silicon + version. + type: boolean + +required: + - "#phy-cells" + - compatible + - reg + - reg-names + +if: + properties: + compatible: + const: xlnx,zynqmp-psgtr-v1.1 + +then: + properties: + xlnx,tx-termination-fix: false + +additionalProperties: false + +examples: + - | + phy: phy@fd400000 { + compatible = "xlnx,zynqmp-psgtr-v1.1"; + reg = <0xfd400000 0x40000>, + <0xfd3d0000 0x1000>; + reg-names = "serdes", "siou"; + clocks = <&refclks 3>, <&refclks 2>, <&refclks 0>; + clock-names = "ref1", "ref2", "ref3"; + #phy-cells = <4>; + }; + +... diff --git a/MAINTAINERS b/MAINTAINERS index 68f21d46614c..82a12abe24c6 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -18852,6 +18852,15 @@ F: Documentation/devicetree/bindings/media/xilinx/ F: drivers/media/platform/xilinx/ F: include/uapi/linux/xilinx-v4l2-controls.h +XILINX ZYNQMP PSGTR PHY DRIVER +M: Anurag Kumar Vulisha <anurag.kumar.vulisha@xilinx.com> +M: Laurent Pinchart <laurent.pinchart@ideasonboard.com> +L: linux-kernel@vger.kernel.org +S: Supported +T: git https://github.com/Xilinx/linux-xlnx.git +F: Documentation/devicetree/bindings/phy/xlnx,zynqmp-psgtr.yaml +F: drivers/phy/xilinx/phy-zynqmp.c + XILLYBUS DRIVER M: Eli Billauer <eli.billauer@gmail.com> L: linux-kernel@vger.kernel.org diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index b3ed94b98d9b..de9362c25c07 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -70,5 +70,6 @@ source "drivers/phy/st/Kconfig" source "drivers/phy/tegra/Kconfig" source "drivers/phy/ti/Kconfig" source "drivers/phy/intel/Kconfig" +source "drivers/phy/xilinx/Kconfig" endmenu diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index 310c149a9df5..c27408e4daae 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -8,24 +8,25 @@ obj-$(CONFIG_GENERIC_PHY_MIPI_DPHY) += phy-core-mipi-dphy.o obj-$(CONFIG_PHY_LPC18XX_USB_OTG) += phy-lpc18xx-usb-otg.o obj-$(CONFIG_PHY_XGENE) += phy-xgene.o obj-$(CONFIG_PHY_PISTACHIO_USB) += phy-pistachio-usb.o -obj-$(CONFIG_ARCH_SUNXI) += allwinner/ -obj-$(CONFIG_ARCH_MESON) += amlogic/ -obj-$(CONFIG_ARCH_MEDIATEK) += mediatek/ -obj-$(CONFIG_ARCH_RENESAS) += renesas/ -obj-$(CONFIG_ARCH_ROCKCHIP) += rockchip/ -obj-$(CONFIG_ARCH_TEGRA) += tegra/ -obj-y += broadcom/ \ +obj-y += allwinner/ \ + amlogic/ \ + broadcom/ \ cadence/ \ freescale/ \ hisilicon/ \ intel/ \ lantiq/ \ marvell/ \ + mediatek/ \ motorola/ \ mscc/ \ qualcomm/ \ ralink/ \ + renesas/ \ + rockchip/ \ samsung/ \ socionext/ \ st/ \ - ti/ + tegra/ \ + ti/ \ + xilinx/ diff --git a/drivers/phy/allwinner/Kconfig b/drivers/phy/allwinner/Kconfig index e760d89d3976..fb584518b2d0 100644 --- a/drivers/phy/allwinner/Kconfig +++ b/drivers/phy/allwinner/Kconfig @@ -22,7 +22,7 @@ config PHY_SUN4I_USB config PHY_SUN6I_MIPI_DPHY tristate "Allwinner A31 MIPI D-PHY Support" depends on ARCH_SUNXI || COMPILE_TEST - depends on HAS_IOMEM + depends on HAS_IOMEM && COMMON_CLK depends on RESET_CONTROLLER select GENERIC_PHY select GENERIC_PHY_MIPI_DPHY diff --git a/drivers/phy/allwinner/phy-sun4i-usb.c b/drivers/phy/allwinner/phy-sun4i-usb.c index e5842e48a5e0..651d5e2a25ce 100644 --- a/drivers/phy/allwinner/phy-sun4i-usb.c +++ b/drivers/phy/allwinner/phy-sun4i-usb.c @@ -7,7 +7,7 @@ * Based on code from * Allwinner Technology Co., Ltd. <www.allwinnertech.com> * - * Modelled after: Samsung S5P/EXYNOS SoC series MIPI CSIS/DSIM DPHY driver + * Modelled after: Samsung S5P/Exynos SoC series MIPI CSIS/DSIM DPHY driver * Copyright (C) 2013 Samsung Electronics Co., Ltd. * Author: Sylwester Nawrocki <s.nawrocki@samsung.com> */ @@ -16,6 +16,7 @@ #include <linux/delay.h> #include <linux/err.h> #include <linux/extcon-provider.h> +#include <linux/gpio/consumer.h> #include <linux/io.h> #include <linux/interrupt.h> #include <linux/kernel.h> diff --git a/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c b/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c index 79c8af5c7c1d..1fa761ba6cbb 100644 --- a/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c +++ b/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c @@ -233,7 +233,7 @@ static int sun6i_dphy_exit(struct phy *phy) } -static struct phy_ops sun6i_dphy_ops = { +static const struct phy_ops sun6i_dphy_ops = { .configure = sun6i_dphy_configure, .power_on = sun6i_dphy_power_on, .power_off = sun6i_dphy_power_off, @@ -241,7 +241,7 @@ static struct phy_ops sun6i_dphy_ops = { .exit = sun6i_dphy_exit, }; -static struct regmap_config sun6i_dphy_regmap_config = { +static const struct regmap_config sun6i_dphy_regmap_config = { .reg_bits = 32, .val_bits = 32, .reg_stride = 4, diff --git a/drivers/phy/cadence/phy-cadence-salvo.c b/drivers/phy/cadence/phy-cadence-salvo.c index 1ecbb964cd21..016514e4aa54 100644 --- a/drivers/phy/cadence/phy-cadence-salvo.c +++ b/drivers/phy/cadence/phy-cadence-salvo.c @@ -88,7 +88,7 @@ #define TB_ADDR_TX_RCVDETSC_CTRL 0x4124 /* TB_ADDR_TX_RCVDETSC_CTRL */ -#define RXDET_IN_P3_32KHZ BIT(1) +#define RXDET_IN_P3_32KHZ BIT(0) struct cdns_reg_pairs { u16 val; diff --git a/drivers/phy/marvell/phy-mvebu-a3700-utmi.c b/drivers/phy/marvell/phy-mvebu-a3700-utmi.c index 23bc3bf5c4c0..8834436bc9db 100644 --- a/drivers/phy/marvell/phy-mvebu-a3700-utmi.c +++ b/drivers/phy/marvell/phy-mvebu-a3700-utmi.c @@ -72,7 +72,7 @@ struct mvebu_a3700_utmi_caps { * struct mvebu_a3700_utmi - PHY driver data * * @regs: PHY registers - * @usb_mis: Regmap with USB miscellaneous registers including PHY ones + * @usb_misc: Regmap with USB miscellaneous registers including PHY ones * @caps: PHY capabilities * @phy: PHY handle */ diff --git a/drivers/phy/motorola/phy-mapphone-mdm6600.c b/drivers/phy/motorola/phy-mapphone-mdm6600.c index 94a34cf75eb3..5172971f4c36 100644 --- a/drivers/phy/motorola/phy-mapphone-mdm6600.c +++ b/drivers/phy/motorola/phy-mapphone-mdm6600.c @@ -178,6 +178,7 @@ static const struct phy_ops gpio_usb_ops = { /** * phy_mdm6600_cmd() - send a command request to mdm6600 * @ddata: device driver data + * @val: value of cmd to be set * * Configures the three command request GPIOs to the specified value. */ @@ -194,7 +195,7 @@ static void phy_mdm6600_cmd(struct phy_mdm6600 *ddata, int val) /** * phy_mdm6600_status() - read mdm6600 status lines - * @ddata: device driver data + * @work: work structure */ static void phy_mdm6600_status(struct work_struct *work) { diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c index a27b8d578d7f..71cb10826326 100644 --- a/drivers/phy/phy-core.c +++ b/drivers/phy/phy-core.c @@ -1062,6 +1062,7 @@ EXPORT_SYMBOL_GPL(__of_phy_provider_register); * __devm_of_phy_provider_register() - create/register phy provider with the * framework * @dev: struct device of the phy provider + * @children: device node containing children (if different from dev->of_node) * @owner: the module owner containing of_xlate * @of_xlate: function pointer to obtain phy instance from phy provider * @@ -1117,12 +1118,14 @@ EXPORT_SYMBOL_GPL(of_phy_provider_unregister); /** * devm_of_phy_provider_unregister() - remove phy provider from the framework * @dev: struct device of the phy provider + * @phy_provider: phy provider returned by of_phy_provider_register() * * destroys the devres associated with this phy provider and invokes * of_phy_provider_unregister to unregister the phy provider. */ void devm_of_phy_provider_unregister(struct device *dev, - struct phy_provider *phy_provider) { + struct phy_provider *phy_provider) +{ int r; r = devres_destroy(dev, devm_phy_provider_release, devm_phy_match, diff --git a/drivers/phy/phy-xgene.c b/drivers/phy/phy-xgene.c index 7a33ec12f71b..b88922e7de1d 100644 --- a/drivers/phy/phy-xgene.c +++ b/drivers/phy/phy-xgene.c @@ -1615,7 +1615,7 @@ static struct phy *xgene_phy_xlate(struct device *dev, if (args->args_count <= 0) return ERR_PTR(-EINVAL); - if (args->args[0] < MODE_SATA || args->args[0] >= MODE_MAX) + if (args->args[0] >= MODE_MAX) return ERR_PTR(-EINVAL); ctx->mode = args->args[0]; diff --git a/drivers/phy/qualcomm/Kconfig b/drivers/phy/qualcomm/Kconfig index ca9ce7e84a5c..e6f0e514fb1f 100644 --- a/drivers/phy/qualcomm/Kconfig +++ b/drivers/phy/qualcomm/Kconfig @@ -59,30 +59,6 @@ config PHY_QCOM_QUSB2 PHY which is usually paired with either the ChipIdea or Synopsys DWC3 USB IPs on MSM SOCs. -config PHY_QCOM_UFS - tristate "Qualcomm UFS PHY driver" - depends on OF && ARCH_QCOM - select GENERIC_PHY - help - Support for UFS PHY on QCOM chipsets. - -if PHY_QCOM_UFS - -config PHY_QCOM_UFS_14NM - tristate - default PHY_QCOM_UFS - help - Support for 14nm UFS QMP phy present on QCOM chipsets. - -config PHY_QCOM_UFS_20NM - tristate - default PHY_QCOM_UFS - depends on BROKEN - help - Support for 20nm UFS QMP phy present on QCOM chipsets. - -endif - config PHY_QCOM_USB_HS tristate "Qualcomm USB HS PHY module" depends on USB_ULPI_BUS diff --git a/drivers/phy/qualcomm/Makefile b/drivers/phy/qualcomm/Makefile index 86fb32efab79..a767915decd0 100644 --- a/drivers/phy/qualcomm/Makefile +++ b/drivers/phy/qualcomm/Makefile @@ -6,9 +6,6 @@ obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o obj-$(CONFIG_PHY_QCOM_PCIE2) += phy-qcom-pcie2.o obj-$(CONFIG_PHY_QCOM_QMP) += phy-qcom-qmp.o obj-$(CONFIG_PHY_QCOM_QUSB2) += phy-qcom-qusb2.o -obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs.o -obj-$(CONFIG_PHY_QCOM_UFS_14NM) += phy-qcom-ufs-qmp-14nm.o -obj-$(CONFIG_PHY_QCOM_UFS_20NM) += phy-qcom-ufs-qmp-20nm.o obj-$(CONFIG_PHY_QCOM_USB_HS) += phy-qcom-usb-hs.o obj-$(CONFIG_PHY_QCOM_USB_HSIC) += phy-qcom-usb-hsic.o obj-$(CONFIG_PHY_QCOM_USB_HS_28NM) += phy-qcom-usb-hs-28nm.o diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c index e91040af3394..562053ce9455 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp.c @@ -82,20 +82,34 @@ struct qmp_phy_init_tbl { * register part of layout ? * if yes, then offset gives index in the reg-layout */ - int in_layout; + bool in_layout; + /* + * mask of lanes for which this register is written + * for cases when second lane needs different values + */ + u8 lane_mask; }; #define QMP_PHY_INIT_CFG(o, v) \ { \ .offset = o, \ .val = v, \ + .lane_mask = 0xff, \ } #define QMP_PHY_INIT_CFG_L(o, v) \ { \ .offset = o, \ .val = v, \ - .in_layout = 1, \ + .in_layout = true, \ + .lane_mask = 0xff, \ + } + +#define QMP_PHY_INIT_CFG_LANE(o, v, l) \ + { \ + .offset = o, \ + .val = v, \ + .lane_mask = l, \ } /* set of registers with offsets different per-PHY */ @@ -185,6 +199,17 @@ static const unsigned int qmp_v4_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = { [QPHY_START_CTRL] = 0x44, [QPHY_PCS_STATUS] = 0x14, [QPHY_PCS_POWER_DOWN_CONTROL] = 0x40, + [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x308, + [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x314, +}; + +static const unsigned int qmp_v4_usb3_uniphy_regs_layout[QPHY_LAYOUT_SIZE] = { + [QPHY_SW_RESET] = 0x00, + [QPHY_START_CTRL] = 0x44, + [QPHY_PCS_STATUS] = 0x14, + [QPHY_PCS_POWER_DOWN_CONTROL] = 0x40, + [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x608, + [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x614, }; static const unsigned int sdm845_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = { @@ -198,6 +223,81 @@ static const unsigned int sm8150_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = { [QPHY_SW_RESET] = QPHY_V4_PCS_UFS_SW_RESET, }; +static const struct qmp_phy_init_tbl ipq8074_usb3_serdes_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x1a), + QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08), + QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x30), + QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0x0f), + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b), + QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x01), + QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x00), + QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x06), + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0x0f), + QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x06), + /* PLL and Loop filter settings */ + QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82), + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x55), + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x55), + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x03), + QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x0b), + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16), + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28), + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80), + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0x15), + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x34), + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00), + QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00), + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_CFG, 0x00), + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x00), + QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x0a), + /* SSC settings */ + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x01), + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x31), + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x01), + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER1, 0x00), + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER2, 0x00), + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0xde), + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x07), +}; + +static const struct qmp_phy_init_tbl ipq8074_usb3_rx_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN, 0x06), + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x02), + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4c), + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4, 0xb8), + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77), + QMP_PHY_INIT_CFG(QSERDES_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80), + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_CNTRL, 0x03), + QMP_PHY_INIT_ |