diff options
32 files changed, 1006 insertions, 247 deletions
diff --git a/Documentation/ABI/testing/sysfs-bus-pci b/Documentation/ABI/testing/sysfs-bus-pci index ecf47559f495..7f63c7e97773 100644 --- a/Documentation/ABI/testing/sysfs-bus-pci +++ b/Documentation/ABI/testing/sysfs-bus-pci @@ -500,3 +500,75 @@ Description: console drivers from the device. Raw users of pci-sysfs resourceN attributes must be terminated prior to resizing. Success of the resizing operation is not guaranteed. + +What: /sys/bus/pci/devices/.../leds/*:enclosure:*/brightness +What: /sys/class/leds/*:enclosure:*/brightness +Date: August 2024 +KernelVersion: 6.12 +Description: + LED indications on PCIe storage enclosures which are controlled + through the NPEM interface (Native PCIe Enclosure Management, + PCIe r6.1 sec 6.28) are accessible as led class devices, both + below /sys/class/leds and below NPEM-capable PCI devices. + + Although these led class devices could be manipulated manually, + in practice they are typically manipulated automatically by an + application such as ledmon(8). + + The name of a led class device is as follows: + <bdf>:enclosure:<indication> + where: + + - <bdf> is the domain, bus, device and function number + (e.g. 10000:02:05.0) + - <indication> is a short description of the LED indication + + Valid indications per PCIe r6.1 table 6-27 are: + + - ok (drive is functioning normally) + - locate (drive is being identified by an admin) + - fail (drive is not functioning properly) + - rebuild (drive is part of an array that is rebuilding) + - pfa (drive is predicted to fail soon) + - hotspare (drive is marked to be used as a replacement) + - ica (drive is part of an array that is degraded) + - ifa (drive is part of an array that is failed) + - idt (drive is not the right type for the connector) + - disabled (drive is disabled, removal is safe) + - specific0 to specific7 (enclosure-specific indications) + + Broadly, the indications fall into one of these categories: + + - to signify drive state (ok, locate, fail, idt, disabled) + - to signify drive role or state in a software RAID array + (rebuild, pfa, hotspare, ica, ifa) + - to signify any other role or state (specific0 to specific7) + + Mandatory indications per PCIe r6.1 sec 7.9.19.2 comprise: + ok, locate, fail, rebuild. All others are optional. + A led class device is only visible if the corresponding + indication is supported by the device. + + To manipulate the indications, write 0 (LED_OFF) or 1 (LED_ON) + to the "brightness" file. Note that manipulating an indication + may implicitly manipulate other indications at the vendor's + discretion. E.g. when the user lights up the "ok" indication, + the vendor may choose to automatically turn off the "fail" + indication. The current state of an indication can be + retrieved by reading its "brightness" file. + + The PCIe Base Specification allows vendors leeway to choose + different colors or blinking patterns for the indications, + but they typically follow the IBPI standard. E.g. the "locate" + indication is usually presented as one or two LEDs blinking at + 4 Hz frequency: + https://en.wikipedia.org/wiki/International_Blinking_Pattern_Interpretation + + PCI Firmware Specification r3.3 sec 4.7 defines a DSM interface + to facilitate shared access by operating system and platform + firmware to a device's NPEM registers. The kernel will use + this DSM interface where available, instead of accessing NPEM + registers directly. The DSM interface does not support the + enclosure-specific indications "specific0" to "specific7", + hence the corresponding led class devices are unavailable if + the DSM interface is used. diff --git a/drivers/Makefile b/drivers/Makefile index fe9ceb0d2288..45d1c3e630f7 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -17,6 +17,9 @@ obj-$(CONFIG_PINCTRL) += pinctrl/ obj-$(CONFIG_GPIOLIB) += gpio/ obj-y += pwm/ +# LEDs must come before PCI, it is needed by NPEM driver +obj-y += leds/ + obj-y += pci/ obj-$(CONFIG_PARISC) += parisc/ @@ -130,7 +133,6 @@ obj-$(CONFIG_CPU_IDLE) += cpuidle/ obj-y += mmc/ obj-y += ufs/ obj-$(CONFIG_MEMSTICK) += memstick/ -obj-y += leds/ obj-$(CONFIG_INFINIBAND) += infiniband/ obj-y += firmware/ obj-$(CONFIG_CRYPTO) += crypto/ diff --git a/drivers/bcma/driver_pci_host.c b/drivers/bcma/driver_pci_host.c index ed3be52ab63d..8540052d37c5 100644 --- a/drivers/bcma/driver_pci_host.c +++ b/drivers/bcma/driver_pci_host.c @@ -334,7 +334,7 @@ static u8 bcma_find_pci_capability(struct bcma_drv_pci *pc, unsigned int dev, } /* If the root port is capable of returning Config Request - * Retry Status (CRS) Completion Status to software then + * Retry Status (RRS) Completion Status to software then * enable the feature. */ static void bcma_core_pci_enable_crs(struct bcma_drv_pci *pc) @@ -348,10 +348,10 @@ static void bcma_core_pci_enable_crs(struct bcma_drv_pci *pc) NULL); root_cap = cap_ptr + PCI_EXP_RTCAP; bcma_extpci_read_config(pc, 0, 0, root_cap, &val16, sizeof(u16)); - if (val16 & BCMA_CORE_PCI_RC_CRS_VISIBILITY) { - /* Enable CRS software visibility */ + if (val16 & BCMA_CORE_PCI_RC_RRS_VISIBILITY) { + /* Enable Configuration RRS Software Visibility */ root_ctrl = cap_ptr + PCI_EXP_RTCTL; - val16 = PCI_EXP_RTCTL_CRSSVE; + val16 = PCI_EXP_RTCTL_RRS_SVE; bcma_extpci_read_config(pc, 0, 0, root_ctrl, &val16, sizeof(u16)); @@ -360,7 +360,7 @@ static void bcma_core_pci_enable_crs(struct bcma_drv_pci *pc) * 100 ms wait time from the end of Reset. If the device is * not done with its internal initialization, it must at * least return a completion TLP, with a completion status - * of "Configuration Request Retry Status (CRS)". The root + * of "Configuration Request Retry Status (RRS)". The root * complex must complete the request to the host by returning * a read-data value of 0001h for the Vendor ID field and * all 1s for any additional bytes included in the request. diff --git a/drivers/gpu/drm/ast/ast_drv.c b/drivers/gpu/drm/ast/ast_drv.c index aae019e79bda..1fadaadfbe39 100644 --- a/drivers/gpu/drm/ast/ast_drv.c +++ b/drivers/gpu/drm/ast/ast_drv.c @@ -287,9 +287,9 @@ static int ast_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) if (ret) return ret; - regs = pcim_iomap(pdev, 1, 0); - if (!regs) - return -EIO; + regs = pcim_iomap_region(pdev, 1, "ast"); + if (IS_ERR(regs)) + return PTR_ERR(regs); if (pdev->revision >= 0x40) { /* @@ -311,9 +311,9 @@ static int ast_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) if (len < AST_IO_MM_LENGTH) return -EIO; - ioregs = pcim_iomap(pdev, 2, 0); - if (!ioregs) - return -EIO; + ioregs = pcim_iomap_region(pdev, 2, "ast"); + if (IS_ERR(ioregs)) + return PTR_ERR(ioregs); } else { /* * Anything else is best effort. diff --git a/drivers/gpu/drm/vboxvideo/vbox_main.c b/drivers/gpu/drm/vboxvideo/vbox_main.c index d4ade9325401..7f686a0190e6 100644 --- a/drivers/gpu/drm/vboxvideo/vbox_main.c +++ b/drivers/gpu/drm/vboxvideo/vbox_main.c @@ -114,6 +114,10 @@ int vbox_hw_init(struct vbox_private *vbox) DRM_INFO("VRAM %08x\n", vbox->full_vram_size); + ret = pcim_request_region(pdev, 0, "vboxvideo"); + if (ret) + return ret; + /* Map guest-heap at end of vram */ vbox->guest_heap = pcim_iomap_range(pdev, 0, GUEST_HEAP_OFFSET(vbox), GUEST_HEAP_SIZE); diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig index aa4d1833f442..0d94e4a967d8 100644 --- a/drivers/pci/Kconfig +++ b/drivers/pci/Kconfig @@ -143,6 +143,15 @@ config PCI_IOV If unsure, say N. +config PCI_NPEM + bool "Native PCIe Enclosure Management" + depends on LEDS_CLASS=y + help + Support for Native PCIe Enclosure Management. It allows managing LED + indications in storage enclosures. Enclosure must support following + indications: OK, Locate, Fail, Rebuild, other indications are + optional. + config PCI_PRI bool "PCI PRI support" select PCI_ATS diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile index 8ddad57934a6..374c5c06d92f 100644 --- a/drivers/pci/Makefile +++ b/drivers/pci/Makefile @@ -35,6 +35,7 @@ obj-$(CONFIG_XEN_PCIDEV_FRONTEND) += xen-pcifront.o obj-$(CONFIG_VGA_ARB) += vgaarb.o obj-$(CONFIG_PCI_DOE) += doe.o obj-$(CONFIG_PCI_DYNAMIC_OF_NODES) += of_property.o +obj-$(CONFIG_PCI_NPEM) += npem.o # Endpoint library must be initialized before its users obj-$(CONFIG_PCI_ENDPOINT) += endpoint/ diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c index 4bf7b433417a..886354342ef1 100644 --- a/drivers/pci/controller/dwc/pcie-tegra194.c +++ b/drivers/pci/controller/dwc/pcie-tegra194.c @@ -183,11 +183,11 @@ #define GEN3_EQ_CONTROL_OFF_FB_MODE_MASK GENMASK(3, 0) #define PORT_LOGIC_AMBA_ERROR_RESPONSE_DEFAULT 0x8D0 -#define AMBA_ERROR_RESPONSE_CRS_SHIFT 3 -#define AMBA_ERROR_RESPONSE_CRS_MASK GENMASK(1, 0) -#define AMBA_ERROR_RESPONSE_CRS_OKAY 0 -#define AMBA_ERROR_RESPONSE_CRS_OKAY_FFFFFFFF 1 -#define AMBA_ERROR_RESPONSE_CRS_OKAY_FFFF0001 2 +#define AMBA_ERROR_RESPONSE_RRS_SHIFT 3 +#define AMBA_ERROR_RESPONSE_RRS_MASK GENMASK(1, 0) +#define AMBA_ERROR_RESPONSE_RRS_OKAY 0 +#define AMBA_ERROR_RESPONSE_RRS_OKAY_FFFFFFFF 1 +#define AMBA_ERROR_RESPONSE_RRS_OKAY_FFFF0001 2 #define MSIX_ADDR_MATCH_LOW_OFF 0x940 #define MSIX_ADDR_MATCH_LOW_OFF_EN BIT(0) @@ -907,11 +907,11 @@ static int tegra_pcie_dw_host_init(struct dw_pcie_rp *pp) dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, 0); - /* Enable as 0xFFFF0001 response for CRS */ + /* Enable as 0xFFFF0001 response for RRS */ val = dw_pcie_readl_dbi(pci, PORT_LOGIC_AMBA_ERROR_RESPONSE_DEFAULT); - val &= ~(AMBA_ERROR_RESPONSE_CRS_MASK << AMBA_ERROR_RESPONSE_CRS_SHIFT); - val |= (AMBA_ERROR_RESPONSE_CRS_OKAY_FFFF0001 << - AMBA_ERROR_RESPONSE_CRS_SHIFT); + val &= ~(AMBA_ERROR_RESPONSE_RRS_MASK << AMBA_ERROR_RESPONSE_RRS_SHIFT); + val |= (AMBA_ERROR_RESPONSE_RRS_OKAY_FFFF0001 << + AMBA_ERROR_RESPONSE_RRS_SHIFT); dw_pcie_writel_dbi(pci, PORT_LOGIC_AMBA_ERROR_RESPONSE_DEFAULT, val); /* Clear Slot Clock Configuration bit if SRNS configuration */ diff --git a/drivers/pci/controller/pci-aardvark.c b/drivers/pci/controller/pci-aardvark.c index 8b3e1a079cf3..afccae3bfbc6 100644 --- a/drivers/pci/controller/pci-aardvark.c +++ b/drivers/pci/controller/pci-aardvark.c @@ -50,7 +50,7 @@ #define PIO_COMPLETION_STATUS_MASK GENMASK(9, 7) #define PIO_COMPLETION_STATUS_OK 0 #define PIO_COMPLETION_STATUS_UR 1 -#define PIO_COMPLETION_STATUS_CRS 2 +#define PIO_COMPLETION_STATUS_RRS 2 #define PIO_COMPLETION_STATUS_CA 4 #define PIO_NON_POSTED_REQ BIT(10) #define PIO_ERR_STATUS BIT(11) @@ -262,7 +262,7 @@ enum { #define MSI_IRQ_NUM 32 -#define CFG_RD_CRS_VAL 0xffff0001 +#define CFG_RD_RRS_VAL 0xffff0001 struct advk_pcie { struct platform_device *pdev; @@ -649,7 +649,7 @@ static void advk_pcie_setup_hw(struct advk_pcie *pcie) advk_pcie_train_link(pcie); } -static int advk_pcie_check_pio_status(struct advk_pcie *pcie, bool allow_crs, u32 *val) +static int advk_pcie_check_pio_status(struct advk_pcie *pcie, bool allow_rrs, u32 *val) { struct device *dev = &pcie->pdev->dev; u32 reg; @@ -669,7 +669,7 @@ static int advk_pcie_check_pio_status(struct advk_pcie *pcie, bool allow_crs, u3 * 2) value Unsupported Request(1) of COMPLETION_STATUS(bit9:7) only * means a PIO write error, and for PIO read it is successful with * a read value of 0xFFFFFFFF. - * 3) value Completion Retry Status(CRS) of COMPLETION_STATUS(bit9:7) + * 3) value Config Request Retry Status(RRS) of COMPLETION_STATUS(bit9:7) * only means a PIO write error, and for PIO read it is successful * with a read value of 0xFFFF0001. * 4) value Completer Abort (CA) of COMPLETION_STATUS(bit9:7) means @@ -694,10 +694,10 @@ static int advk_pcie_check_pio_status(struct advk_pcie *pcie, bool allow_crs, u3 strcomp_status = "UR"; ret = -EOPNOTSUPP; break; - case PIO_COMPLETION_STATUS_CRS: - if (allow_crs && val) { - /* PCIe r4.0, sec 2.3.2, says: - * If CRS Software Visibility is enabled: + case PIO_COMPLETION_STATUS_RRS: + if (allow_rrs && val) { + /* PCIe r6.0, sec 2.3.2, says: + * If Configuration RRS Software Visibility is enabled: * For a Configuration Read Request that includes both * bytes of the Vendor ID field of a device Function's * Configuration Space Header, the Root Complex must @@ -706,22 +706,22 @@ static int advk_pcie_check_pio_status(struct advk_pcie *pcie, bool allow_crs, u3 * all '1's for any additional bytes included in the * request. * - * So CRS in this case is not an error status. + * So RRS in this case is not an error status. */ - *val = CFG_RD_CRS_VAL; + *val = CFG_RD_RRS_VAL; strcomp_status = NULL; ret = 0; break; } - /* PCIe r4.0, sec 2.3.2, says: - * If CRS Software Visibility is not enabled, the Root Complex + /* PCIe r6.0, sec 2.3.2, says: + * If RRS Software Visibility is not enabled, the Root Complex * must re-issue the Configuration Request as a new Request. - * If CRS Software Visibility is enabled: For a Configuration + * If RRS Software Visibility is enabled: For a Configuration * Write Request or for any other Configuration Read Request, * the Root Complex must re-issue the Configuration Request as * a new Request. * A Root Complex implementation may choose to limit the number - * of Configuration Request/CRS Completion Status loops before + * of Configuration Request/RRS Completion Status loops before * determining that something is wrong with the target of the * Request and taking appropriate action, e.g., complete the * Request to the host as a failed transaction. @@ -729,7 +729,7 @@ static int advk_pcie_check_pio_status(struct advk_pcie *pcie, bool allow_crs, u3 * So return -EAGAIN and caller (pci-aardvark.c driver) will * re-issue request again up to the PIO_RETRY_CNT retries. */ - strcomp_status = "CRS"; + strcomp_status = "RRS"; ret = -EAGAIN; break; case PIO_COMPLETION_STATUS_CA: @@ -920,8 +920,8 @@ advk_pci_bridge_emul_pcie_conf_write(struct pci_bridge_emul *bridge, case PCI_EXP_RTCTL: { u16 rootctl = le16_to_cpu(bridge->pcie_conf.rootctl); - /* Only emulation of PMEIE and CRSSVE bits is provided */ - rootctl &= PCI_EXP_RTCTL_PMEIE | PCI_EXP_RTCTL_CRSSVE; + /* Only emulation of PMEIE and RRS_SVE bits is provided */ + rootctl &= PCI_EXP_RTCTL_PMEIE | PCI_EXP_RTCTL_RRS_SVE; bridge->pcie_conf.rootctl = cpu_to_le16(rootctl); break; } @@ -1075,7 +1075,7 @@ static int advk_sw_pci_bridge_init(struct advk_pcie *pcie) bridge->pcie_conf.slotsta = cpu_to_le16(PCI_EXP_SLTSTA_PDS); /* Indicates supports for Completion Retry Status */ - bridge->pcie_conf.rootcap = cpu_to_le16(PCI_EXP_RTCAP_CRSVIS); + bridge->pcie_conf.rootcap = cpu_to_le16(PCI_EXP_RTCAP_RRS_SV); bridge->subsystem_vendor_id = advk_readl(pcie, PCIE_CORE_SSDEV_ID_REG) & 0xffff; bridge->subsystem_id = advk_readl(pcie, PCIE_CORE_SSDEV_ID_REG) >> 16; @@ -1141,7 +1141,7 @@ static int advk_pcie_rd_conf(struct pci_bus *bus, u32 devfn, { struct advk_pcie *pcie = bus->sysdata; int retry_count; - bool allow_crs; + bool allow_rrs; u32 reg; int ret; @@ -1153,16 +1153,16 @@ static int advk_pcie_rd_conf(struct pci_bus *bus, u32 devfn, size, val); /* - * Completion Retry Status is possible to return only when reading all - * 4 bytes from PCI_VENDOR_ID and PCI_DEVICE_ID registers at once and - * CRSSVE flag on Root Bridge is enabled. + * Configuration Request Retry Status (RRS) is possible to return + * only when reading both bytes from PCI_VENDOR_ID at once and + * RRS_SVE flag on Root Port is enabled. */ - allow_crs = (where == PCI_VENDOR_ID) && (size == 4) && + allow_rrs = (where == PCI_VENDOR_ID) && (size >= 2) && (le16_to_cpu(pcie->bridge.pcie_conf.rootctl) & - PCI_EXP_RTCTL_CRSSVE); + PCI_EXP_RTCTL_RRS_SVE); if (advk_pcie_pio_is_running(pcie)) - goto try_crs; + goto try_rrs; /* Program the control register */ reg = advk_readl(pcie, PIO_CTRL); @@ -1189,12 +1189,12 @@ static int advk_pcie_rd_conf(struct pci_bus *bus, u32 devfn, ret = advk_pcie_wait_pio(pcie); if (ret < 0) - goto try_crs; + goto try_rrs; retry_count += ret; /* Check PIO status and get the read result */ - ret = advk_pcie_check_pio_status(pcie, allow_crs, val); + ret = advk_pcie_check_pio_status(pcie, allow_rrs, val); } while (ret == -EAGAIN && retry_count < PIO_RETRY_CNT); if (ret < 0) @@ -1207,13 +1207,13 @@ static int advk_pcie_rd_conf(struct pci_bus *bus, u32 devfn, return PCIBIOS_SUCCESSFUL; -try_crs: +try_rrs: /* - * If it is possible, return Completion Retry Status so that caller - * tries to issue the request again instead of failing. + * If it is possible, return Configuration Request Retry Status so + * that caller tries to issue the request again instead of failing. */ - if (allow_crs) { - *val = CFG_RD_CRS_VAL; + if (allow_rrs) { + *val = CFG_RD_RRS_VAL; return PCIBIOS_SUCCESSFUL; } diff --git a/drivers/pci/controller/pci-xgene.c b/drivers/pci/controller/pci-xgene.c index 8e457fa450a2..1e2ebbfa36d1 100644 --- a/drivers/pci/controller/pci-xgene.c +++ b/drivers/pci/controller/pci-xgene.c @@ -171,17 +171,17 @@ static int xgene_pcie_config_read32(struct pci_bus *bus, unsigned int devfn, /* * The v1 controller has a bug in its Configuration Request Retry - * Status (CRS) logic: when CRS Software Visibility is enabled and + * Status (RRS) logic: when RRS Software Visibility is enabled and * we read the Vendor and Device ID of a non-existent device, the * controller fabricates return data of 0xFFFF0001 ("device exists * but is not ready") instead of 0xFFFFFFFF (PCI_ERROR_RESPONSE) * ("device does not exist"). This causes the PCI core to retry * the read until it times out. Avoid this by not claiming to - * support CRS SV. + * support RRS SV. */ if (pci_is_root_bus(bus) && (port->version == XGENE_PCIE_IP_VER_1) && ((where & ~0x3) == XGENE_V1_PCI_EXP_CAP + PCI_EXP_RTCTL)) - *val &= ~(PCI_EXP_RTCAP_CRSVIS << 16); + *val &= ~(PCI_EXP_RTCAP_RRS_SV << 16); if (size <= 2) *val = (*val >> (8 * (where & 3))) & ((1 << (size * 8)) - 1); diff --git a/drivers/pci/controller/pcie-iproc.c b/drivers/pci/controller/pcie-iproc.c index 97f739a2c9f8..22134e95574b 100644 --- a/drivers/pci/controller/pcie-iproc.c +++ b/drivers/pci/controller/pcie-iproc.c @@ -54,7 +54,7 @@ #define CFG_RD_SUCCESS 0 #define CFG_RD_UR 1 -#define CFG_RD_CRS 2 +#define CFG_RD_RRS 2 #define CFG_RD_CA 3 #define CFG_RETRY_STATUS 0xffff0001 #define CFG_RETRY_STATUS_TIMEOUT_US 500000 /* 500 milliseconds */ @@ -485,31 +485,31 @@ static unsigned int iproc_pcie_cfg_retry(struct iproc_pcie *pcie, u32 status; /* - * As per PCIe spec r3.1, sec 2.3.2, CRS Software Visibility only + * As per PCIe r6.0, sec 2.3.2, Config RRS Software Visibility only * affects config reads of the Vendor ID. For config writes or any * other config reads, the Root may automatically reissue the * configuration request again as a new request. * * For config reads, this hardware returns CFG_RETRY_STATUS data - * when it receives a CRS completion, regardless of the address of - * the read or the CRS Software Visibility Enable bit. As a + * when it receives a RRS completion, regardless of the address of + * the read or the RRS Software Visibility Enable bit. As a * partial workaround for this, we retry in software any read that * returns CFG_RETRY_STATUS. * * Note that a non-Vendor ID config register may have a value of * CFG_RETRY_STATUS. If we read that, we can't distinguish it from - * a CRS completion, so we will incorrectly retry the read and + * a RRS completion, so we will incorrectly retry the read and * eventually return the wrong data (0xffffffff). */ data = readl(cfg_data_p); while (data == CFG_RETRY_STATUS && timeout--) { /* - * CRS state is set in CFG_RD status register + * RRS state is set in CFG_RD status register * This will handle the case where CFG_RETRY_STATUS is * valid config data. */ status = iproc_pcie_read_reg(pcie, IPROC_PCIE_CFG_RD_STATUS); - if (status != CFG_RD_CRS) + if (status != CFG_RD_RRS) return data; udelay(1); @@ -556,8 +556,8 @@ static void iproc_pcie_fix_cap(struct iproc_pcie *pcie, int where, u32 *val) break; case IPROC_PCI_EXP_CAP + PCI_EXP_RTCTL: - /* Don't advertise CRS SV support */ - *val &= ~(PCI_EXP_RTCAP_CRSVIS << 16); + /* Don't advertise RRS SV support */ + *val &= ~(PCI_EXP_RTCAP_RRS_SV << 16); break; default: diff --git a/drivers/pci/devres.c b/drivers/pci/devres.c index 3780a9f9ec00..b97589e99fad 100644 --- a/drivers/pci/devres.c +++ b/drivers/pci/devres.c @@ -728,7 +728,7 @@ EXPORT_SYMBOL(pcim_iounmap); * Mapping and region will get automatically released on driver detach. If * desired, release manually only with pcim_iounmap_region(). */ -static void __iomem *pcim_iomap_region(struct pci_dev *pdev, int bar, +void __iomem *pcim_iomap_region(struct pci_dev *pdev, int bar, const char *name) { int ret; @@ -761,6 +761,7 @@ err_region: return IOMEM_ERR_PTR(ret); } +EXPORT_SYMBOL(pcim_iomap_region); /** * pcim_iounmap_region - Unmap and release a PCI BAR @@ -783,7 +784,7 @@ static void pcim_iounmap_region(struct pci_dev *pdev, int bar) } /** - * pcim_iomap_regions - Request and iomap PCI BARs + * pcim_iomap_regions - Request and iomap PCI BARs (DEPRECATED) * @pdev: PCI device to map IO resources for * @mask: Mask of BARs to request and iomap * @name: Name associated with the requests @@ -791,6 +792,9 @@ static void pcim_iounmap_region(struct pci_dev *pdev, int bar) * Returns: 0 on success, negative error code on failure. * * Request and iomap regions specified by @mask. + * + * This function is DEPRECATED. Do not use it in new code. + * Use pcim_iomap_region() instead. */ int pcim_iomap_regions(struct pci_dev *pdev, int mask, const char *name) { @@ -863,6 +867,7 @@ int pcim_request_region(struct pci_dev *pdev, int bar, const char *name) { return _pcim_request_region(pdev, bar, name, 0); } +EXPORT_SYMBOL(pcim_request_region); /** * pcim_request_region_exclusive - Request a PCI BAR exclusively diff --git a/drivers/pci/hotplug/TODO b/drivers/pci/hotplug/TODO index 9d428b0ea524..92e6e20e8595 100644 --- a/drivers/pci/hotplug/TODO +++ b/drivers/pci/hotplug/TODO @@ -51,11 +51,6 @@ ibmphp: shpchp: -* There is only a single implementation of struct hpc_ops. Can the struct be - removed and its functions invoked directly? This has already been done in - pciehp with commit 82a9e79ef132 ("PCI: pciehp: remove hpc_ops"). Clarify - if there was a specific reason not to apply the same change to shpchp. - * The hardirq handler shpc_isr() queues events on a workqueue. It can be simplified by converting it to threaded IRQ handling. Use pciehp as a template. diff --git a/drivers/pci/hotplug/cpqphp_pci.c b/drivers/pci/hotplug/cpqphp_pci.c index e9f1fb333a71..718bc6cf12cb 100644 --- a/drivers/pci/hotplug/cpqphp_pci.c +++ b/drivers/pci/hotplug/cpqphp_pci.c @@ -138,7 +138,7 @@ static int PCI_RefinedAccessConfig(struct pci_bus *bus, unsigned int devfn, u8 o if (pci_bus_read_config_dword(bus, devfn, PCI_VENDOR_ID, &vendID) == -1) return -1; - if (vendID == 0xffffffff) + if (PCI_POSSIBLE_ERROR(vendID)) return -1; return pci_bus_read_config_dword(bus, devfn, offset, value); } @@ -253,7 +253,7 @@ static int PCI_GetBusDevHelper(struct controller *ctrl, u8 *bus_num, u8 *dev_num *dev_num = tdevice; ctrl->pci_bus->number = tbus; pci_bus_read_config_dword(ctrl->pci_bus, *dev_num, PCI_VENDOR_ID, &work); - if (!nobridge || (work == 0xffffffff)) + if (!nobridge || PCI_POSSIBLE_ERROR(work)) return 0; dbg("bus_num %d devfn %d\n", *bus_num, *dev_num); diff --git a/drivers/pci/hotplug/shpchp.h b/drivers/pci/hotplug/shpchp.h index 3a97f455336e..f0e2d2d54d71 100644 --- a/drivers/pci/hotplug/shpchp.h +++ b/drivers/pci/hotplug/shpchp.h @@ -72,7 +72,6 @@ struct slot { u8 latch_save; u8 pwr_save; struct controller *ctrl; - const struct hpc_ops *hpc_ops; struct hotplug_slot hotplug_slot; struct list_head slot_list; struct delayed_work work; /* work for button event */ @@ -94,7 +93,6 @@ struct controller { int slot_num_inc; /* 1 or -1 */ struct pci_dev *pci_dev; struct list_head slot_list; - const struct hpc_ops *hpc_ops; wait_queue_head_t queue; /* sleep & wake process */ u8 slot_device_offset; u32 pcix_misc2_reg; /* for amd pogo errata */ @@ -300,24 +298,22 @@ static inline void amd_pogo_errata_restore_misc_reg(struct slot *p_slot) pci_write_config_dword(p_slot->ctrl->pci_dev, PCIX_MISCII_OFFSET, pcix_misc2_temp); } -struct hpc_ops { - int (*power_on_slot)(struct slot *slot); - int (*slot_enable)(struct slot *slot); - int (*slot_disable)(struct slot *slot); - int (*set_bus_speed_mode)(struct slot *slot, enum pci_bus_speed speed); - int (*get_power_status)(struct slot *slot, u8 *status); - int (*get_attention_status)(struct slot *slot, u8 *status); - int (*set_attention_status)(struct slot *slot, u8 status); - int (*get_latch_status)(struct slot *slot, u8 *status); - int (*get_adapter_status)(struct slot *slot, u8 *status); - int (*get_adapter_speed)(struct slot *slot, enum pci_bus_speed *speed); - int (*get_prog_int)(struct slot *slot, u8 *prog_int); - int (*query_power_fault)(struct slot *slot); - void (*green_led_on)(struct slot *slot); - void (*green_led_off)(struct slot *slot); - void (*green_led_blink)(struct slot *slot); - void (*release_ctlr)(struct controller *ctrl); - int (*check_cmd_status)(struct controller *ctrl); -}; +int shpchp_power_on_slot(struct slot *slot); +int shpchp_slot_enable(struct slot *slot); +int shpchp_slot_disable(struct slot *slot); +int shpchp_set_bus_speed_mode(struct slot *slot, enum pci_bus_speed speed); +int shpchp_get_power_status(struct slot *slot, u8 *status); +int shpchp_get_attention_status(struct slot *slot, u8 *status); +int shpchp_set_attention_status(struct slot *slot, u8 status); +int shpchp_get_latch_status(struct slot *slot, u8 *status); +int shpchp_get_adapter_status(struct slot *slot, u8 *status); +int shpchp_get_adapter_speed(struct slot *slot, enum pci_bus_speed *speed); +int shpchp_get_prog_int(struct slot *slot, u8 *prog_int); +int shpchp_query_power_fault(struct slot *slot); +void shpchp_green_led_on(struct slot *slot); +void shpchp_green_led_off(struct slot *slot); +void shpchp_green_led_blink(struct slot *slot); +void shpchp_release_ctlr(struct controller *ctrl); +int shpchp_check_cmd_status(struct controller *ctrl); #endif /* _SHPCHP_H */ diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c index 56c7795ed890..a92e28b72908 100644 --- a/drivers/pci/hotplug/shpchp_core.c +++ b/drivers/pci/hotplug/shpchp_core.c |