diff options
Diffstat (limited to 'Documentation')
19 files changed, 314 insertions, 15 deletions
diff --git a/Documentation/ABI/testing/configfs-usb-gadget-uvc b/Documentation/ABI/testing/configfs-usb-gadget-uvc index 4feb692c4c1d..b6720768d63d 100644 --- a/Documentation/ABI/testing/configfs-usb-gadget-uvc +++ b/Documentation/ABI/testing/configfs-usb-gadget-uvc @@ -342,6 +342,70 @@ Description: Specific uncompressed frame descriptors support ========================= ===================================== +What: /config/usb-gadget/gadget/functions/uvc.name/streaming/framebased +Date: Sept 2024 +KernelVersion: 5.15 +Description: Framebased format descriptors + +What: /config/usb-gadget/gadget/functions/uvc.name/streaming/framebased/name +Date: Sept 2024 +KernelVersion: 5.15 +Description: Specific framebased format descriptors + + ================== ======================================= + bFormatIndex unique id for this format descriptor; + only defined after parent header is + linked into the streaming class; + read-only + bmaControls this format's data for bmaControls in + the streaming header + bmInterlaceFlags specifies interlace information, + read-only + bAspectRatioY the X dimension of the picture aspect + ratio, read-only + bAspectRatioX the Y dimension of the picture aspect + ratio, read-only + bDefaultFrameIndex optimum frame index for this stream + bBitsPerPixel number of bits per pixel used to + specify color in the decoded video + frame + guidFormat globally unique id used to identify + stream-encoding format + ================== ======================================= + +What: /config/usb-gadget/gadget/functions/uvc.name/streaming/framebased/name/name +Date: Sept 2024 +KernelVersion: 5.15 +Description: Specific framebased frame descriptors + + ========================= ===================================== + bFrameIndex unique id for this framedescriptor; + only defined after parent format is + linked into the streaming header; + read-only + dwFrameInterval indicates how frame interval can be + programmed; a number of values + separated by newline can be specified + dwDefaultFrameInterval the frame interval the device would + like to use as default + dwBytesPerLine Specifies the number of bytes per line + of video for packed fixed frame size + formats, allowing the receiver to + perform stride alignment of the video. + If the bVariableSize value (above) is + TRUE (1), or if the format does not + permit such alignment, this value shall + be set to zero (0). + dwMaxBitRate the maximum bit rate at the shortest + frame interval in bps + dwMinBitRate the minimum bit rate at the longest + frame interval in bps + wHeight height of decoded bitmap frame in px + wWidth width of decoded bitmam frame in px + bmCapabilities still image support, fixed frame-rate + support + ========================= ===================================== + What: /config/usb-gadget/gadget/functions/uvc.name/streaming/header Date: Dec 2014 KernelVersion: 4.0 diff --git a/Documentation/ABI/testing/sysfs-class-typec b/Documentation/ABI/testing/sysfs-class-typec index 281b995beb05..38e101c17a00 100644 --- a/Documentation/ABI/testing/sysfs-class-typec +++ b/Documentation/ABI/testing/sysfs-class-typec @@ -149,6 +149,19 @@ Description: advertise to the partner. The currently used capabilities are in brackets. Selection happens by writing to the file. +What: /sys/class/typec/<port>/usb_capability +Date: November 2024 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: Lists the supported USB Modes. The default USB mode that is used + next time with the Enter_USB Message is in brackets. The default + mode can be changed by writing to the file when supported by the + driver. + + Valid values: + - usb2 (USB 2.0) + - usb3 (USB 3.2) + - usb4 (USB4) + USB Type-C partner devices (eg. /sys/class/typec/port0-partner/) What: /sys/class/typec/<port>-partner/accessory_mode @@ -220,6 +233,20 @@ Description: directory exists, it will have an attribute file for every VDO in Discover Identity command result. +What: /sys/class/typec/<port>-partner/usb_mode +Date: November 2024 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: The USB Modes that the partner device supports. The active mode + is displayed in brackets. The active USB mode can be changed by + writing to this file when the port driver is able to send Data + Reset Message to the partner. That requires USB Power Delivery + contract between the partner and the port. + + Valid values: + - usb2 (USB 2.0) + - usb3 (USB 3.2) + - usb4 (USB4) + USB Type-C cable devices (eg. /sys/class/typec/port0-cable/) Note: Electronically Marked Cables will have a device also for one cable plug diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml index fb216ce68bb3..67700440e23b 100644 --- a/Documentation/devicetree/bindings/connector/usb-connector.yaml +++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml @@ -253,6 +253,46 @@ properties: additionalProperties: false + sink-wait-cap-time-ms: + description: Represents the max time in ms that USB Type-C port (in sink + role) should wait for the port partner (source role) to send source caps. + SinkWaitCap timer starts when port in sink role attaches to the source. + This timer will stop when sink receives PD source cap advertisement before + timeout in which case it'll move to capability negotiation stage. A + timeout leads to a hard reset message by the port. + minimum: 310 + maximum: 620 + default: 310 + + ps-source-off-time-ms: + description: Represents the max time in ms that a DRP in source role should + take to turn off power after the PsSourceOff timer starts. PsSourceOff + timer starts when a sink's PHY layer receives EOP of the GoodCRC message + (corresponding to an Accept message sent in response to a PR_Swap or a + FR_Swap request). This timer stops when last bit of GoodCRC EOP + corresponding to the received PS_RDY message is transmitted by the PHY + layer. A timeout shall lead to error recovery in the type-c port. + minimum: 750 + maximum: 920 + default: 920 + + cc-debounce-time-ms: + description: Represents the max time in ms that a port shall wait to + determine if it's attached to a partner. + minimum: 100 + maximum: 200 + default: 200 + + sink-bc12-completion-time-ms: + description: Represents the max time in ms that a port in sink role takes + to complete Battery Charger (BC1.2) Detection. BC1.2 detection is a + hardware mechanism, which in some TCPC implementations, can run in + parallel once the Type-C connection state machine reaches the "potential + connect as sink" state. In TCPCs where this causes delays to respond to + the incoming PD messages, sink-bc12-completion-time-ms is used to delay + PD negotiation till BC1.2 detection completes. + default: 0 + dependencies: sink-vdos-v1: [ sink-vdos ] sink-vdos: [ sink-vdos-v1 ] @@ -380,7 +420,7 @@ examples: }; # USB-C connector attached to a typec port controller(ptn5110), which has - # power delivery support and enables drp. + # power delivery support, explicitly defines time properties and enables drp. - | #include <dt-bindings/usb/pd.h> typec: ptn5110 { @@ -393,6 +433,10 @@ examples: sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM) PDO_VAR(5000, 12000, 2000)>; op-sink-microwatt = <10000000>; + sink-wait-cap-time-ms = <465>; + ps-source-off-time-ms = <835>; + cc-debounce-time-ms = <101>; + sink-bc12-completion-time-ms = <500>; }; }; diff --git a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml index dc3a3f709fea..6d6d211883ae 100644 --- a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml +++ b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml @@ -11,12 +11,17 @@ maintainers: properties: compatible: - enum: - - fsl,imx8mq-usb-phy - - fsl,imx8mp-usb-phy + oneOf: + - enum: + - fsl,imx8mq-usb-phy + - fsl,imx8mp-usb-phy + - items: + - const: fsl,imx95-usb-phy + - const: fsl,imx8mp-usb-phy reg: - maxItems: 1 + minItems: 1 + maxItems: 2 "#phy-cells": const: 0 @@ -89,7 +94,34 @@ required: - clocks - clock-names -additionalProperties: false +allOf: + - if: + properties: + compatible: + contains: + enum: + - fsl,imx95-usb-phy + then: + properties: + reg: + items: + - description: USB PHY Control range + - description: USB PHY TCA Block range + else: + properties: + reg: + maxItems: 1 + + - if: + properties: + compatible: + contains: + enum: + - fsl,imx95-usb-phy + then: + $ref: /schemas/usb/usb-switch.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/phy/qcom,msm8998-qmp-usb3-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,msm8998-qmp-usb3-phy.yaml index f1f4e4f83352..1636285fbe53 100644 --- a/Documentation/devicetree/bindings/phy/qcom,msm8998-qmp-usb3-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,msm8998-qmp-usb3-phy.yaml @@ -18,6 +18,7 @@ properties: enum: - qcom,msm8998-qmp-usb3-phy - qcom,qcm2290-qmp-usb3-phy + - qcom,qcs615-qmp-usb3-phy - qcom,sdm660-qmp-usb3-phy - qcom,sm6115-qmp-usb3-phy @@ -96,6 +97,7 @@ allOf: contains: enum: - qcom,msm8998-qmp-usb3-phy + - qcom,qcs615-qmp-usb3-phy - qcom,sdm660-qmp-usb3-phy then: properties: diff --git a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml index 95eecbaef05c..4aed4b5d65ec 100644 --- a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml @@ -25,6 +25,7 @@ properties: - qcom,msm8996-qusb2-phy - qcom,msm8998-qusb2-phy - qcom,qcm2290-qusb2-phy + - qcom,qcs615-qusb2-phy - qcom,sdm660-qusb2-phy - qcom,sm4250-qusb2-phy - qcom,sm6115-qusb2-phy diff --git a/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.yaml b/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.yaml index bb5010dcefe1..7ffcd236d7bb 100644 --- a/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.yaml +++ b/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.yaml @@ -25,6 +25,7 @@ properties: - allwinner,sun20i-d1-musb - allwinner,sun50i-a100-musb - allwinner,sun50i-h6-musb + - allwinner,sun55i-a523-musb - const: allwinner,sun8i-a33-musb - items: - const: allwinner,sun50i-h616-musb diff --git a/Documentation/devicetree/bindings/usb/cypress,cypd4226.yaml b/Documentation/devicetree/bindings/usb/cypress,cypd4226.yaml index 89fc9a434d05..0620d82508c1 100644 --- a/Documentation/devicetree/bindings/usb/cypress,cypd4226.yaml +++ b/Documentation/devicetree/bindings/usb/cypress,cypd4226.yaml @@ -61,18 +61,15 @@ additionalProperties: false examples: - | - #include <dt-bindings/gpio/tegra194-gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> i2c { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <2>; typec@8 { compatible = "cypress,cypd4226"; reg = <0x08>; - interrupt-parent = <&gpio_aon>; - interrupts = <TEGRA194_AON_GPIO(BB, 2) IRQ_TYPE_LEVEL_LOW>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; firmware-name = "nvidia,jetson-agx-xavier"; #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml b/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml index 9ea1e4cd0709..baf130669c38 100644 --- a/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml @@ -12,7 +12,11 @@ maintainers: properties: compatible: - const: fsl,imx8mp-dwc3 + oneOf: + - items: + - const: fsl,imx95-dwc3 + - const: fsl,imx8mp-dwc3 + - const: fsl,imx8mp-dwc3 reg: items: diff --git a/Documentation/devicetree/bindings/usb/generic-ehci.yaml b/Documentation/devicetree/bindings/usb/generic-ehci.yaml index 0d797e01fc0b..223f2abd5e59 100644 --- a/Documentation/devicetree/bindings/usb/generic-ehci.yaml +++ b/Documentation/devicetree/bindings/usb/generic-ehci.yaml @@ -32,6 +32,7 @@ properties: - allwinner,sun50i-a64-ehci - allwinner,sun50i-h6-ehci - allwinner,sun50i-h616-ehci + - allwinner,sun55i-a523-ehci - allwinner,sun5i-a13-ehci - allwinner,sun6i-a31-ehci - allwinner,sun7i-a20-ehci diff --git a/Documentation/devicetree/bindings/usb/generic-ohci.yaml b/Documentation/devicetree/bindings/usb/generic-ohci.yaml index cf33764553fa..3ee1586fc8b9 100644 --- a/Documentation/devicetree/bindings/usb/generic-ohci.yaml +++ b/Documentation/devicetree/bindings/usb/generic-ohci.yaml @@ -19,6 +19,7 @@ properties: - allwinner,sun50i-a64-ohci - allwinner,sun50i-h6-ohci - allwinner,sun50i-h616-ohci + - allwinner,sun55i-a523-ohci - allwinner,sun5i-a13-ohci - allwinner,sun6i-a31-ohci - allwinner,sun7i-a20-ohci diff --git a/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml b/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml index fc833363cfb4..6fe2d356dcbd 100644 --- a/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml +++ b/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml @@ -62,7 +62,14 @@ allOf: peer-hub: true vdd-supply: true -additionalProperties: false +patternProperties: + "^.*@[0-9a-f]{1,2}$": + description: The hard wired USB devices + type: object + $ref: /schemas/usb/usb-device.yaml + additionalProperties: true + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/usb/maxim,max33359.yaml b/Documentation/devicetree/bindings/usb/maxim,max33359.yaml index 276bf7554215..20b62228371b 100644 --- a/Documentation/devicetree/bindings/usb/maxim,max33359.yaml +++ b/Documentation/devicetree/bindings/usb/maxim,max33359.yaml @@ -69,6 +69,7 @@ examples: PDO_FIXED_DATA_SWAP | PDO_FIXED_DUAL_ROLE) PDO_FIXED(9000, 2000, 0)>; + sink-bc12-completion-time-ms = <500>; }; }; }; diff --git a/Documentation/devicetree/bindings/usb/microchip,mpfs-musb.yaml b/Documentation/devicetree/bindings/usb/microchip,mpfs-musb.yaml index 27b909de4992..a812317d8089 100644 --- a/Documentation/devicetree/bindings/usb/microchip,mpfs-musb.yaml +++ b/Documentation/devicetree/bindings/usb/microchip,mpfs-musb.yaml @@ -14,8 +14,11 @@ maintainers: properties: compatible: - enum: - - microchip,mpfs-musb + oneOf: + - items: + - const: microchip,pic64gx-musb + - const: microchip,mpfs-musb + - const: microchip,mpfs-musb dr_mode: true diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml index f7be05641930..935e204b607b 100644 --- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml @@ -29,6 +29,7 @@ properties: - qcom,qcs8300-dwc3 - qcom,qdu1000-dwc3 - qcom,sa8775p-dwc3 + - qcom,sar2130p-dwc3 - qcom,sc7180-dwc3 - qcom,sc7280-dwc3 - qcom,sc8180x-dwc3 @@ -340,6 +341,7 @@ allOf: contains: enum: - qcom,qcm2290-dwc3 + - qcom,sar2130p-dwc3 - qcom,sc8180x-dwc3 - qcom,sc8180x-dwc3-mp - qcom,sm6115-dwc3 diff --git a/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml b/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml index c63db3ebd07b..b23ef29bf794 100644 --- a/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml +++ b/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml @@ -76,6 +76,10 @@ properties: Integer to use BUSWAIT register. renesas,enable-gpio: + deprecated: true + maxItems: 1 + + renesas,enable-gpios: maxItems: 1 description: | gpio specifier to check GPIO determining if USB function should be diff --git a/Documentation/devicetree/bindings/usb/rockchip,dwc3.yaml b/Documentation/devicetree/bindings/usb/rockchip,dwc3.yaml index c4924113f9bd..a21cc098542d 100644 --- a/Documentation/devicetree/bindings/usb/rockchip,dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/rockchip,dwc3.yaml @@ -27,6 +27,7 @@ select: enum: - rockchip,rk3328-dwc3 - rockchip,rk3568-dwc3 + - rockchip,rk3576-dwc3 - rockchip,rk3588-dwc3 required: - compatible @@ -37,6 +38,7 @@ properties: - enum: - rockchip,rk3328-dwc3 - rockchip,rk3568-dwc3 + - rockchip,rk3576-dwc3 - rockchip,rk3588-dwc3 - const: snps,dwc3 @@ -113,7 +115,9 @@ allOf: properties: compatible: contains: - const: rockchip,rk3568-dwc3 + enum: + - rockchip,rk3568-dwc3 + - rockchip,rk3576-dwc3 then: properties: clocks: diff --git a/Documentation/devicetree/bindings/usb/ti,tusb1046.yaml b/Documentation/devicetree/bindings/usb/ti,tusb1046.yaml new file mode 100644 index 000000000000..f713cac4a8ac --- /dev/null +++ b/Documentation/devicetree/bindings/usb/ti,tusb1046.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/ti,tusb1046.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments TUSB1046-DCI Type-C crosspoint switch + +maintainers: + - Romain Gantois <romain.gantois@bootlin.com> + +allOf: + - $ref: usb-switch.yaml# + +properties: + compatible: + const: ti,tusb1046 + + reg: + maxItems: 1 + +required: + - compatible + - reg + - port + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + typec-mux@44 { + compatible = "ti,tusb1046"; + reg = <0x44>; + + mode-switch; + orientation-switch; + + port { + endpoint { + remote-endpoint = <&typec_controller>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/usb/ti,tusb73x0-pci.yaml b/Documentation/devicetree/bindings/usb/ti,tusb73x0-pci.yaml new file mode 100644 index 000000000000..ddda734f36fb --- /dev/null +++ b/Documentation/devicetree/bindings/usb/ti,tusb73x0-pci.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/ti,tusb73x0-pci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TUSB73x0 USB 3.0 xHCI Host Controller (PCIe) + +maintainers: + - Francesco Dolcini <francesco.dolcini@toradex.com> + +description: + TUSB73x0 USB 3.0 xHCI Host Controller via PCIe x1 Gen2 interface. + The TUSB7320 supports up to two downstream ports, the TUSB7340 supports up + to four downstream ports, both variants share the same PCI device ID. + +properties: + compatible: + const: pci104c,8241 + + reg: + maxItems: 1 + + ti,pwron-active-high: + $ref: /schemas/types.yaml#/definitions/flag + description: + Configure the polarity of the PWRONx# signals. When this is present, the + PWRONx# pins are active high and their internal pull-down resistors are + disabled. When this is absent, the PWRONx# pins are active low (default) + and their internal pull-down resistors are enabled. + +required: + - compatible + - reg + +allOf: + - $ref: usb-xhci.yaml + +additionalProperties: false + +examples: + - | + pcie@0 { + reg = <0x0 0x1000>; + ranges = <0x02000000 0x0 0x100000 0x10000000 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + + usb@0 { + compatible = "pci104c,8241"; + reg = <0x0 0x0 0x0 0x0 0x0>; + ti,pwron-active-high; + }; + }; |