diff options
Diffstat (limited to 'arch/arm')
32 files changed, 215 insertions, 137 deletions
diff --git a/arch/arm/boot/dts/arm/integratorap.dts b/arch/arm/boot/dts/arm/integratorap.dts index 5b52d75bc6be..d9927d3181dc 100644 --- a/arch/arm/boot/dts/arm/integratorap.dts +++ b/arch/arm/boot/dts/arm/integratorap.dts @@ -158,7 +158,7 @@ valid-mask = <0x003fffff>; }; - pci: pciv3@62000000 { + pci: pci@62000000 { compatible = "arm,integrator-ap-pci", "v3,v360epc-pci"; device_type = "pci"; #interrupt-cells = <1>; diff --git a/arch/arm/boot/dts/microchip/sam9x60.dtsi b/arch/arm/boot/dts/microchip/sam9x60.dtsi index 8b53997675e7..73d570a17269 100644 --- a/arch/arm/boot/dts/microchip/sam9x60.dtsi +++ b/arch/arm/boot/dts/microchip/sam9x60.dtsi @@ -172,7 +172,7 @@ status = "disabled"; uart4: serial@200 { - compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; + compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; reg = <0x200 0x200>; interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>; dmas = <&dma0 @@ -240,7 +240,7 @@ status = "disabled"; uart5: serial@200 { - compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; + compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; reg = <0x200 0x200>; atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>; @@ -370,7 +370,7 @@ status = "disabled"; uart11: serial@200 { - compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; + compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; reg = <0x200 0x200>; interrupts = <32 IRQ_TYPE_LEVEL_HIGH 7>; dmas = <&dma0 @@ -419,7 +419,7 @@ status = "disabled"; uart12: serial@200 { - compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; + compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; reg = <0x200 0x200>; interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>; dmas = <&dma0 @@ -576,7 +576,7 @@ status = "disabled"; uart6: serial@200 { - compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; + compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; reg = <0x200 0x200>; interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>; dmas = <&dma0 @@ -625,7 +625,7 @@ status = "disabled"; uart7: serial@200 { - compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; + compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; reg = <0x200 0x200>; interrupts = <10 IRQ_TYPE_LEVEL_HIGH 7>; dmas = <&dma0 @@ -674,7 +674,7 @@ status = "disabled"; uart8: serial@200 { - compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; + compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; reg = <0x200 0x200>; interrupts = <11 IRQ_TYPE_LEVEL_HIGH 7>; dmas = <&dma0 @@ -723,7 +723,7 @@ status = "disabled"; uart0: serial@200 { - compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; + compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; reg = <0x200 0x200>; interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>; dmas = <&dma0 @@ -791,7 +791,7 @@ status = "disabled"; uart1: serial@200 { - compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; + compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; reg = <0x200 0x200>; interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>; dmas = <&dma0 @@ -859,7 +859,7 @@ status = "disabled"; uart2: serial@200 { - compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; + compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; reg = <0x200 0x200>; interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>; dmas = <&dma0 @@ -927,7 +927,7 @@ status = "disabled"; uart3: serial@200 { - compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; + compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; reg = <0x200 0x200>; interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>; dmas = <&dma0 @@ -1050,7 +1050,7 @@ status = "disabled"; uart9: serial@200 { - compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; + compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; reg = <0x200 0x200>; interrupts = <15 IRQ_TYPE_LEVEL_HIGH 7>; dmas = <&dma0 @@ -1099,7 +1099,7 @@ status = "disabled"; uart10: serial@200 { - compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; + compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart"; reg = <0x200 0x200>; interrupts = <16 IRQ_TYPE_LEVEL_HIGH 7>; dmas = <&dma0 diff --git a/arch/arm/boot/dts/nspire/nspire.dtsi b/arch/arm/boot/dts/nspire/nspire.dtsi index bb240e6a3a6f..088bcc38589f 100644 --- a/arch/arm/boot/dts/nspire/nspire.dtsi +++ b/arch/arm/boot/dts/nspire/nspire.dtsi @@ -161,7 +161,7 @@ }; watchdog: watchdog@90060000 { - compatible = "arm,amba-primecell"; + compatible = "arm,primecell"; reg = <0x90060000 0x1000>; interrupts = <3>; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx53-sk-imx53.dts b/arch/arm/boot/dts/nxp/imx/imx53-sk-imx53.dts index 103e73176e47..1a00d290092a 100644 --- a/arch/arm/boot/dts/nxp/imx/imx53-sk-imx53.dts +++ b/arch/arm/boot/dts/nxp/imx/imx53-sk-imx53.dts @@ -60,6 +60,16 @@ status = "okay"; }; +&cpu0 { + /* CPU rated to 800 MHz, not the default 1.2GHz. */ + operating-points = < + /* kHz uV */ + 166666 850000 + 400000 900000 + 800000 1050000 + >; +}; + &ecspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira.dtsi index 1a599c294ab8..1ca4d219609f 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira.dtsi @@ -182,7 +182,7 @@ pinctrl-0 = <&pinctrl_rtc_int>; reg = <0x68>; interrupt-parent = <&gpio7>; - interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6sll.dtsi b/arch/arm/boot/dts/nxp/imx/imx6sll.dtsi index 2873369a57c0..3659fd5ecfa6 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6sll.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6sll.dtsi @@ -552,7 +552,7 @@ reg = <0x020ca000 0x1000>; interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SLL_CLK_USBPHY2>; - phy-reg_3p0-supply = <®_3p0>; + phy-3p0-supply = <®_3p0>; fsl,anatop = <&anatop>; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi b/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi index 3a4308666552..a05069d49cb8 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi @@ -863,7 +863,6 @@ reg = <0>; ldb_from_lcdif1: endpoint { - remote-endpoint = <&lcdif1_to_ldb>; }; }; @@ -1010,6 +1009,8 @@ <&clks IMX6SX_CLK_USDHC1>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; status = "disabled"; }; @@ -1022,6 +1023,8 @@ <&clks IMX6SX_CLK_USDHC2>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; status = "disabled"; }; @@ -1034,6 +1037,8 @@ <&clks IMX6SX_CLK_USDHC3>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; status = "disabled"; }; @@ -1309,11 +1314,8 @@ power-domains = <&pd_disp>; status = "disabled"; - ports { - port { - lcdif1_to_ldb: endpoint { - remote-endpoint = <&ldb_from_lcdif1>; - }; + port { + lcdif1_to_ldb: endpoint { }; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx7s.dtsi b/arch/arm/boot/dts/nxp/imx/imx7s.dtsi index 54026c2c93fa..6ffb428dc939 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7s.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx7s.dtsi @@ -1184,6 +1184,8 @@ <&clks IMX7D_USDHC1_ROOT_CLK>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; + fsl,tuning-step = <2>; + fsl,tuning-start-tap = <20>; status = "disabled"; }; @@ -1196,6 +1198,8 @@ <&clks IMX7D_USDHC2_ROOT_CLK>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; + fsl,tuning-step = <2>; + fsl,tuning-start-tap = <20>; status = "disabled"; }; @@ -1208,6 +1212,8 @@ <&clks IMX7D_USDHC3_ROOT_CLK>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; + fsl,tuning-step = <2>; + fsl,tuning-start-tap = <20>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/ti/omap/am335x-bone-common.dtsi b/arch/arm/boot/dts/ti/omap/am335x-bone-common.dtsi index b958607c71dc..96451c8a815c 100644 --- a/arch/arm/boot/dts/ti/omap/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/ti/omap/am335x-bone-common.dtsi @@ -145,6 +145,8 @@ /* MDIO */ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0) + /* Added to support GPIO controlled PHY reset */ + AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT_PULLUP, MUX_MODE7) >; }; @@ -153,6 +155,8 @@ /* MDIO reset value */ AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7) AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7) + /* Added to support GPIO controlled PHY reset */ + AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE7) >; }; @@ -215,6 +219,7 @@ baseboard_eeprom: baseboard_eeprom@50 { compatible = "atmel,24c256"; reg = <0x50>; + vcc-supply = <&ldo4_reg>; #address-cells = <1>; #size-cells = <1>; @@ -377,6 +382,10 @@ ethphy0: ethernet-phy@0 { reg = <0>; + /* Support GPIO reset on revision C3 boards */ + reset-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; + reset-assert-us = <300>; + reset-deassert-us = <6500>; }; }; diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h index a094f964c869..f6181f69577f 100644 --- a/arch/arm/include/asm/cacheflush.h +++ b/arch/arm/include/asm/cacheflush.h @@ -231,14 +231,15 @@ vivt_flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned vma->vm_flags); } -static inline void -vivt_flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn) +static inline void vivt_flush_cache_pages(struct vm_area_struct *vma, + unsigned long user_addr, unsigned long pfn, unsigned int nr) { struct mm_struct *mm = vma->vm_mm; if (!mm || cpumask_test_cpu(smp_processor_id(), mm_cpumask(mm))) { unsigned long addr = user_addr & PAGE_MASK; - __cpuc_flush_user_range(addr, addr + PAGE_SIZE, vma->vm_flags); + __cpuc_flush_user_range(addr, addr + nr * PAGE_SIZE, + vma->vm_flags); } } @@ -247,15 +248,17 @@ vivt_flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsig vivt_flush_cache_mm(mm) #define flush_cache_range(vma,start,end) \ vivt_flush_cache_range(vma,start,end) -#define flush_cache_page(vma,addr,pfn) \ - vivt_flush_cache_page(vma,addr,pfn) +#define flush_cache_pages(vma, addr, pfn, nr) \ + vivt_flush_cache_pages(vma, addr, pfn, nr) #else -extern void flush_cache_mm(struct mm_struct *mm); -extern void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end); -extern void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn); +void flush_cache_mm(struct mm_struct *mm); +void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end); +void flush_cache_pages(struct vm_area_struct *vma, unsigned long user_addr, + unsigned long pfn, unsigned int nr); #endif #define flush_cache_dup_mm(mm) flush_cache_mm(mm) +#define flush_cache_page(vma, addr, pfn) flush_cache_pages(vma, addr, pfn, 1) /* * flush_icache_user_range is used when we want to ensure that the @@ -289,7 +292,9 @@ extern void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr * See update_mmu_cache for the user space part. */ #define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1 -extern void flush_dcache_page(struct page *); +void flush_dcache_page(struct page *); +void flush_dcache_folio(struct folio *folio); +#define flush_dcache_folio flush_dcache_folio #define ARCH_IMPLEMENTS_FLUSH_KERNEL_VMAP_RANGE 1 static inline void flush_kernel_vmap_range(void *addr, int size) @@ -317,12 +322,6 @@ static inline void flush_anon_page(struct vm_area_struct *vma, #define flush_dcache_mmap_unlock(mapping) xa_unlock_irq(&mapping->i_pages) /* - * We don't appear to need to do anything here. In fact, if we did, we'd - * duplicate cache flushing elsewhere performed by flush_dcache_page(). - */ -#define flush_icache_page(vma,page) do { } while (0) - -/* * flush_cache_vmap() is used when creating mappings (eg, via vmap, * vmalloc, ioremap etc) in kernel space for pages. On non-VIPT * caches, since the direct-mappings of these pages may contain cached diff --git a/arch/arm/include/asm/hugetlb.h b/arch/arm/include/asm/hugetlb.h index d02d6ca88e92..a3a82b7158d4 100644 --- a/arch/arm/include/asm/hugetlb.h +++ b/arch/arm/include/asm/hugetlb.h @@ -10,6 +10,7 @@ #ifndef _ASM_ARM_HUGETLB_H #define _ASM_ARM_HUGETLB_H +#include <asm/cacheflush.h> #include <asm/page.h> #include <asm/hugetlb-3level.h> #include <asm-generic/hugetlb.h> diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index 34662a9d4cab..ba573f22d7cc 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -207,8 +207,9 @@ static inline void __sync_icache_dcache(pte_t pteval) extern void __sync_icache_dcache(pte_t pteval); #endif -void set_pte_at(struct mm_struct *mm, unsigned long addr, - pte_t *ptep, pte_t pteval); +void set_ptes(struct mm_struct *mm, unsigned long addr, + pte_t *ptep, pte_t pteval, unsigned int nr); +#define set_ptes set_ptes static inline pte_t clear_pte_bit(pte_t pte, pgprot_t prot) { diff --git a/arch/arm/include/asm/syscall.h b/arch/arm/include/asm/syscall.h index dfeed440254a..fe4326d938c1 100644 --- a/arch/arm/include/asm/syscall.h +++ b/arch/arm/include/asm/syscall.h @@ -25,6 +25,9 @@ static inline int syscall_get_nr(struct task_struct *task, if (IS_ENABLED(CONFIG_AEABI) && !IS_ENABLED(CONFIG_OABI_COMPAT)) return task_thread_info(task)->abi_syscall; + if (task_thread_info(task)->abi_syscall == -1) + return -1; + return task_thread_info(task)->abi_syscall & __NR_SYSCALL_MASK; } diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h index b8cbe03ad260..f40d06ad5d2a 100644 --- a/arch/arm/include/asm/tlb.h +++ b/arch/arm/include/asm/tlb.h @@ -39,7 +39,9 @@ static inline void __tlb_remove_table(void *_table) static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte, unsigned long addr) { - pgtable_pte_page_dtor(pte); + struct ptdesc *ptdesc = page_ptdesc(pte); + + pagetable_pte_dtor(ptdesc); #ifndef CONFIG_ARM_LPAE /* @@ -50,17 +52,17 @@ __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte, unsigned long addr) __tlb_adjust_range(tlb, addr - PAGE_SIZE, 2 * PAGE_SIZE); #endif - tlb_remove_table(tlb, pte); + tlb_remove_ptdesc(tlb, ptdesc); } static inline void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmdp, unsigned long addr) { #ifdef CONFIG_ARM_LPAE - struct page *page = virt_to_page(pmdp); + struct ptdesc *ptdesc = virt_to_ptdesc(pmdp); - pgtable_pmd_page_dtor(page); - tlb_remove_table(tlb, page); + pagetable_pmd_dtor(ptdesc); + tlb_remove_ptdesc(tlb, ptdesc); #endif } diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h index 0ccc985b90af..38c6e4a2a0b6 100644 --- a/arch/arm/include/asm/tlbflush.h +++ b/arch/arm/include/asm/tlbflush.h @@ -619,18 +619,22 @@ extern void flush_bp_all(void); * If PG_dcache_clean is not set for the page, we need to ensure that any * cache entries for the kernels virtual memory range are written * back to the page. On ARMv6 and later, the cache coherency is handled via - * the set_pte_at() function. + * the set_ptes() function. */ #if __LINUX_ARM_ARCH__ < 6 -extern void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, - pte_t *ptep); +void update_mmu_cache_range(struct vm_fault *vmf, struct vm_area_struct *vma, + unsigned long addr, pte_t *ptep, unsigned int nr); #else -static inline void update_mmu_cache(struct vm_area_struct *vma, - unsigned long addr, pte_t *ptep) +static inline void update_mmu_cache_range(struct vm_fault *vmf, + struct vm_area_struct *vma, unsigned long addr, pte_t *ptep, + unsigned int nr) { } #endif +#define update_mmu_cache(vma, addr, ptep) \ + update_mmu_cache_range(NULL, vma, addr, ptep, 1) + #define update_mmu_cache_pmd(vma, address, pmd) do { } while (0) #endif diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index bcc4c9ec3aa4..5c31e9de7a60 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -90,6 +90,7 @@ slow_work_pending: cmp r0, #0 beq no_work_pending movlt scno, #(__NR_restart_syscall - __NR_SYSCALL_BASE) + str scno, [tsk, #TI_ABI_SYSCALL] @ make sure tracers see update ldmia sp, {r0 - r6} @ have to reload r0 - r6 b local_restart @ ... and off we go ENDPROC(ret_fast_syscall) diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c index 054e9199f30d..dc0fb7a81371 100644 --- a/arch/arm/kernel/hw_breakpoint.c +++ b/arch/arm/kernel/hw_breakpoint.c @@ -626,7 +626,7 @@ int hw_breakpoint_arch_parse(struct perf_event *bp, hw->address &= ~alignment_mask; hw->ctrl.len <<= offset; - if (is_default_overflow_handler(bp)) { + if (uses_default_overflow_handler(bp)) { /* * Mismatch breakpoints are required for single-stepping * breakpoints. @@ -798,7 +798,7 @@ static void watchpoint_handler(unsigned long addr, unsigned int fsr, * Otherwise, insert a temporary mismatch breakpoint so that * we can single-step over the watchpoint trigger. */ - if (!is_default_overflow_handler(wp)) + if (!uses_default_overflow_handler(wp)) continue; step: enable_single_step(wp, instruction_pointer(regs)); @@ -811,7 +811,7 @@ step: info->trigger = addr; pr_debug("watchpoint fired: address = 0x%x\n", info->trigger); perf_bp_event(wp, regs); - if (is_default_overflow_handler(wp)) + if (uses_default_overflow_handler(wp)) enable_single_step(wp, instruction_pointer(regs)); } @@ -886,7 +886,7 @@ static void breakpoint_handler(unsigned long unknown, struct pt_regs *regs) info->trigger = addr; pr_debug("breakpoint fired: address = 0x%x\n", addr); perf_bp_event(bp, regs); - if (is_default_overflow_handler(bp)) + if (uses_default_overflow_handler(bp)) enable_single_step(bp, addr); goto unlock; } diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c index 2d8e2516906b..fef32d73f912 100644 --- a/arch/arm/kernel/ptrace.c +++ b/arch/arm/kernel/ptrace.c @@ -783,8 +783,9 @@ long arch_ptrace(struct task_struct *child, long request, break; case PTRACE_SET_SYSCALL: - task_thread_info(child)->abi_syscall = data & - __NR_SYSCALL_MASK; + if (data != -1) + data &= __NR_SYSCALL_MASK; + task_thread_info(child)->abi_syscall = data; ret = 0; break; diff --git a/arch/arm/mach-pxa/sharpsl_pm.h b/arch/arm/mach-pxa/sharpsl_pm.h index 20e4cab64d85..623167f30ec2 100644 --- a/arch/arm/mach-pxa/sharpsl_pm.h +++ b/arch/arm/mach-pxa/sharpsl_pm.h @@ -105,5 +105,4 @@ void sharpsl_pm_led(int val); #define MAX1111_ACIN_VOLT 6u int sharpsl_pm_pxa_read_max1111(int channel); -void corgi_lcd_limit_intensity(int limit); #endif diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c index 1c021cef965f..8bc4ea51a0c1 100644 --- a/arch/arm/mach-pxa/spitz_pm.c +++ b/arch/arm/mach-pxa/spitz_pm.c @@ -15,6 +15,7 @@ #include <linux/interrupt.h> #include <linux/platform_device.h> #include <linux/apm-emulation.h> +#include <linux/spi/corgi_lcd.h> #include <asm/irq.h> #include <asm/mach-types.h> diff --git a/arch/arm/mach-zynq/pm.c b/arch/arm/mach-zynq/pm.c index 8ba450ab559c..61ad965ef3ac 100644 --- a/arch/arm/mach-zynq/pm.c +++ b/arch/arm/mach-zynq/pm.c @@ -8,8 +8,8 @@ */ #include <linux/io.h> +#include <linux/of.h> #include <linux/of_address.h> -#include <linux/of_device.h> #include "common.h" /* register offsets */ diff --git a/arch/arm/mm/copypage-v4mc.c b/arch/arm/mm/copypage-v4mc.c index f1da3b439b96..7ddd82b9fe8b 100644 --- a/arch/arm/mm/copypage-v4mc.c +++ b/arch/arm/mm/copypage-v4mc.c @@ -64,10 +64,11 @@ static void mc_copy_user_page(void *from, void *to) void v4_mc_copy_user_highpage(struct page *to, struct page *from, unsigned long vaddr, struct vm_area_struct *vma) { + struct folio *src = page_folio(from); void *kto = kmap_atomic(to); - if (!test_and_set_bit(PG_dcache_clean, &from->flags)) - __flush_dcache_page(page_mapping_file(from), from); + if (!test_and_set_bit(PG_dcache_clean, &src->flags)) + __flush_dcache_folio(folio_flush_mapping(src), src); raw_spin_lock(&minicache_lock); diff --git a/arch/arm/mm/copypage-v6.c b/arch/arm/mm/copypage-v6.c index d8a115de5507..a1a71f36d850 100644 --- a/arch/arm/mm/copypage-v6.c +++ b/arch/arm/mm/copypage-v6.c @@ -69,11 +69,12 @@ static void discard_old_kernel_data(void *kto) static void v6_copy_user_highpage_aliasing(struct page *to, struct page *from, unsigned long vaddr, struct vm_area_struct *vma) { + struct folio *src = page_folio(from); unsigned int offset = CACHE_COLOUR(vaddr); unsigned long kfrom, kto; - if (!test_and_set_bit(PG_dcache_clean, &from->flags)) - __flush_dcache_page(page_mapping_file(from), from); + if (!test_and_set_bit(PG_dcache_clean, &src->flags)) + __flush_dcache_folio(folio_flush_mapping(src), src); /* FIXME: not highmem safe */ discard_old_kernel_data(page_address(to)); diff --git a/arch/arm/mm/copypage-xscale.c b/arch/arm/mm/copypage-xscale.c index bcb485620a05..f1e29d3e8193 100644 --- a/arch/arm/mm/copypage-xscale.c +++ b/arch/arm/mm/copypage-xscale.c @@ -84,10 +84,11 @@ static void mc_copy_user_page(void *from, void *to) void xscale_mc_copy_user_highpage(struct page *to, struct page *from, unsigned long vaddr, struct vm_area_struct *vma) { + struct folio *src = page_folio(from); void *kto = kmap_atomic(to); - if (!test_and_set_bit(PG_dcache_clean, &from->flags)) - __flush_dcache_page(page_mapping_file(from), from); + if (!test_and_set_bit(PG_dcache_clean, &src->flags)) + __flush_dcache_folio(folio_flush_mapping(src), src); raw_spin_lock(&minicache_lock); diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 033a1bce2b17..5409225b4abc 100644 --- a/ |