1 files changed, 77 insertions, 0 deletions
diff --git a/arch/x86/kernel/cpu/cacheinfo.c b/arch/x86/kernel/cpu/cacheinfo.c
index 32fb04920171..0cbacece87db 100644
--- a/arch/x86/kernel/cpu/cacheinfo.c
+++ b/arch/x86/kernel/cpu/cacheinfo.c
@@ -20,6 +20,8 @@
 #include <asm/cacheinfo.h>
 #include <asm/amd_nb.h>
 #include <asm/smp.h>
+#include <asm/mtrr.h>
+#include <asm/tlbflush.h>
 
 #include "cpu.h"
 
@@ -1043,3 +1045,78 @@ int populate_cache_leaves(unsigned int cpu)
 
 	return 0;
 }
+
+/*
+ * Disable and enable caches. Needed for changing MTRRs and the PAT MSR.
+ *
+ * Since we are disabling the cache don't allow any interrupts,
+ * they would run extremely slow and would only increase the pain.
+ *
+ * The caller must ensure that local interrupts are disabled and
+ * are reenabled after cache_enable() has been called.
+ */
+static unsigned long saved_cr4;
+static DEFINE_RAW_SPINLOCK(cache_disable_lock);
+
+void cache_disable(void) __acquires(cache_disable_lock)
+{
+	unsigned long cr0;
+
+	/*
+	 * Note that this is not ideal
+	 * since the cache is only flushed/disabled for this CPU while the
+	 * MTRRs are changed, but changing this requires more invasive
+	 * changes to the way the kernel boots
+	 */
+
+	raw_spin_lock(&cache_disable_lock);
+
+	/* Enter the no-fill (CD=1, NW=0) cache mode and flush caches. */
+	cr0 = read_cr0() | X86_CR0_CD;
+	write_cr0(cr0);
+
+	/*
+	 * Cache flushing is the most time-consuming step when programming
+	 * the MTRRs. Fortunately, as per the Intel Software Development
+	 * Manual, we can skip it if the processor supports cache self-
+	 * snooping.
+	 */
+	if (!static_cpu_has(X86_FEATURE_SELFSNOOP))
+		wbinvd();
+
+	/* Save value of CR4 and clear Page Global Enable (bit 7) */
+	if (cpu_feature_enabled(X86_FEATURE_PGE)) {
+		saved_cr4 = __read_cr4();
+		__write_cr4(saved_cr4 & ~X86_CR4_PGE);
+	}
+
+	/* Flush all TLBs via a mov %cr3, %reg; mov %reg, %cr3 */
+	count_vm_tlb_event(NR_TLB_LOCAL_FLUSH_ALL);
+	flush_tlb_local();
+
+	if (cpu_feature_enabled(X86_FEATURE_MTRR))
+		mtrr_disable();
+
+	/* Again, only flush caches if we have to. */
+	if (!static_cpu_has(X86_FEATURE_SELFSNOOP))
+		wbinvd();
+}
+
+void cache_enable(void) __releases(cache_disable_lock)
+{
+	/* Flush TLBs (no need to flush caches - they are disabled) */
+	count_vm_tlb_event(NR_TLB_LOCAL_FLUSH_ALL);
+	flush_tlb_local();
+
+	if (cpu_feature_enabled(X86_FEATURE_MTRR))
+		mtrr_enable();
+
+	/* Enable caches */
+	write_cr0(read_cr0() & ~X86_CR0_CD);
+
+	/* Restore value of CR4 */
+	if (cpu_feature_enabled(X86_FEATURE_PGE))
+		__write_cr4(saved_cr4);
+
+	raw_spin_unlock(&cache_disable_lock);
+}