diff options
Diffstat (limited to 'arch/x86/kernel')
68 files changed, 2048 insertions, 2786 deletions
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index 3578ad248bc9..32acb970f416 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -134,7 +134,7 @@ obj-$(CONFIG_EFI) += sysfb_efi.o obj-$(CONFIG_PERF_EVENTS) += perf_regs.o obj-$(CONFIG_TRACING) += tracepoint.o obj-$(CONFIG_SCHED_MC_PRIO) += itmt.o -obj-$(CONFIG_X86_INTEL_UMIP) += umip.o +obj-$(CONFIG_X86_UMIP) += umip.o obj-$(CONFIG_UNWINDER_ORC) += unwind_orc.o obj-$(CONFIG_UNWINDER_FRAME_POINTER) += unwind_frame.o @@ -146,7 +146,6 @@ ifeq ($(CONFIG_X86_64),y) obj-$(CONFIG_AUDIT) += audit_64.o obj-$(CONFIG_GART_IOMMU) += amd_gart_64.o aperture_64.o - obj-$(CONFIG_CALGARY_IOMMU) += pci-calgary_64.o tce_64.o obj-$(CONFIG_MMCONF_FAM10H) += mmconf-fam10h_64.o obj-y += vsmp_64.o diff --git a/arch/x86/kernel/acpi/wakeup_32.S b/arch/x86/kernel/acpi/wakeup_32.S index e95e95960156..daf88f8143c5 100644 --- a/arch/x86/kernel/acpi/wakeup_32.S +++ b/arch/x86/kernel/acpi/wakeup_32.S @@ -9,8 +9,7 @@ .code32 ALIGN -ENTRY(wakeup_pmode_return) -wakeup_pmode_return: +SYM_CODE_START(wakeup_pmode_return) movw $__KERNEL_DS, %ax movw %ax, %ss movw %ax, %fs @@ -39,6 +38,7 @@ wakeup_pmode_return: # jump to place where we left off movl saved_eip, %eax jmp *%eax +SYM_CODE_END(wakeup_pmode_return) bogus_magic: jmp bogus_magic @@ -72,7 +72,7 @@ restore_registers: popfl ret -ENTRY(do_suspend_lowlevel) +SYM_CODE_START(do_suspend_lowlevel) call save_processor_state call save_registers pushl $3 @@ -87,10 +87,11 @@ ret_point: call restore_registers call restore_processor_state ret +SYM_CODE_END(do_suspend_lowlevel) .data ALIGN -ENTRY(saved_magic) .long 0 +SYM_DATA(saved_magic, .long 0) saved_eip: .long 0 # saved registers diff --git a/arch/x86/kernel/acpi/wakeup_64.S b/arch/x86/kernel/acpi/wakeup_64.S index 7f9ade13bbcf..c8daa92f38dc 100644 --- a/arch/x86/kernel/acpi/wakeup_64.S +++ b/arch/x86/kernel/acpi/wakeup_64.S @@ -14,7 +14,7 @@ /* * Hooray, we are in Long 64-bit mode (but still running in low memory) */ -ENTRY(wakeup_long64) +SYM_FUNC_START(wakeup_long64) movq saved_magic, %rax movq $0x123456789abcdef0, %rdx cmpq %rdx, %rax @@ -40,9 +40,9 @@ ENTRY(wakeup_long64) movq saved_rip, %rax jmp *%rax -ENDPROC(wakeup_long64) +SYM_FUNC_END(wakeup_long64) -ENTRY(do_suspend_lowlevel) +SYM_FUNC_START(do_suspend_lowlevel) FRAME_BEGIN subq $8, %rsp xorl %eax, %eax @@ -125,7 +125,7 @@ ENTRY(do_suspend_lowlevel) addq $8, %rsp FRAME_END jmp restore_processor_state -ENDPROC(do_suspend_lowlevel) +SYM_FUNC_END(do_suspend_lowlevel) .data saved_rbp: .quad 0 @@ -136,4 +136,4 @@ saved_rbx: .quad 0 saved_rip: .quad 0 saved_rsp: .quad 0 -ENTRY(saved_magic) .quad 0 +SYM_DATA(saved_magic, .quad 0) diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c index 9d3a971ea364..9ec463fe96f2 100644 --- a/arch/x86/kernel/alternative.c +++ b/arch/x86/kernel/alternative.c @@ -956,16 +956,15 @@ NOKPROBE_SYMBOL(patch_cmp); int poke_int3_handler(struct pt_regs *regs) { struct text_poke_loc *tp; - unsigned char int3 = 0xcc; void *ip; /* * Having observed our INT3 instruction, we now must observe * bp_patching.nr_entries. * - * nr_entries != 0 INT3 - * WMB RMB - * write INT3 if (nr_entries) + * nr_entries != 0 INT3 + * WMB RMB + * write INT3 if (nr_entries) * * Idem for other elements in bp_patching. */ @@ -978,9 +977,9 @@ int poke_int3_handler(struct pt_regs *regs) return 0; /* - * Discount the sizeof(int3). See text_poke_bp_batch(). + * Discount the INT3. See text_poke_bp_batch(). */ - ip = (void *) regs->ip - sizeof(int3); + ip = (void *) regs->ip - INT3_INSN_SIZE; /* * Skip the binary search if there is a single member in the vector. @@ -997,8 +996,28 @@ int poke_int3_handler(struct pt_regs *regs) return 0; } - /* set up the specified breakpoint detour */ - regs->ip = (unsigned long) tp->detour; + ip += tp->len; + + switch (tp->opcode) { + case INT3_INSN_OPCODE: + /* + * Someone poked an explicit INT3, they'll want to handle it, + * do not consume. + */ + return 0; + + case CALL_INSN_OPCODE: + int3_emulate_call(regs, (long)ip + tp->rel32); + break; + + case JMP32_INSN_OPCODE: + case JMP8_INSN_OPCODE: + int3_emulate_jmp(regs, (long)ip + tp->rel32); + break; + + default: + BUG(); + } return 1; } @@ -1014,7 +1033,7 @@ NOKPROBE_SYMBOL(poke_int3_handler); * synchronization using int3 breakpoint. * * The way it is done: - * - For each entry in the vector: + * - For each entry in the vector: * - add a int3 trap to the address that will be patched * - sync cores * - For each entry in the vector: @@ -1027,9 +1046,9 @@ NOKPROBE_SYMBOL(poke_int3_handler); */ void text_poke_bp_batch(struct text_poke_loc *tp, unsigned int nr_entries) { - int patched_all_but_first = 0; - unsigned char int3 = 0xcc; + unsigned char int3 = INT3_INSN_OPCODE; unsigned int i; + int do_sync; lockdep_assert_held(&text_mutex); @@ -1053,16 +1072,16 @@ void text_poke_bp_batch(struct text_poke_loc *tp, unsigned int nr_entries) /* * Second step: update all but the first byte of the patched range. */ - for (i = 0; i < nr_entries; i++) { + for (do_sync = 0, i = 0; i < nr_entries; i++) { if (tp[i].len - sizeof(int3) > 0) { text_poke((char *)tp[i].addr + sizeof(int3), - (const char *)tp[i].opcode + sizeof(int3), + (const char *)tp[i].text + sizeof(int3), tp[i].len - sizeof(int3)); - patched_all_but_first++; + do_sync++; } } - if (patched_all_but_first) { + if (do_sync) { /* * According to Intel, this core syncing is very likely * not necessary and we'd be safe even without it. But @@ -1075,10 +1094,17 @@ void text_poke_bp_batch(struct text_poke_loc *tp, unsigned int nr_entries) * Third step: replace the first byte (int3) by the first byte of * replacing opcode. */ - for (i = 0; i < nr_entries; i++) - text_poke(tp[i].addr, tp[i].opcode, sizeof(int3)); + for (do_sync = 0, i = 0; i < nr_entries; i++) { + if (tp[i].text[0] == INT3_INSN_OPCODE) + continue; + + text_poke(tp[i].addr, tp[i].text, sizeof(int3)); + do_sync++; + } + + if (do_sync) + on_each_cpu(do_sync_core, NULL, 1); - on_each_cpu(do_sync_core, NULL, 1); /* * sync_core() implies an smp_mb() and orders this store against * the writing of the new instruction. @@ -1087,6 +1113,60 @@ void text_poke_bp_batch(struct text_poke_loc *tp, unsigned int nr_entries) bp_patching.nr_entries = 0; } +void text_poke_loc_init(struct text_poke_loc *tp, void *addr, + const void *opcode, size_t len, const void *emulate) +{ + struct insn insn; + + if (!opcode) + opcode = (void *)tp->text; + else + memcpy((void *)tp->text, opcode, len); + + if (!emulate) + emulate = opcode; + + kernel_insn_init(&insn, emulate, MAX_INSN_SIZE); + insn_get_length(&insn); + + BUG_ON(!insn_complete(&insn)); + BUG_ON(len != insn.length); + + tp->addr = addr; + tp->len = len; + tp->opcode = insn.opcode.bytes[0]; + + switch (tp->opcode) { + case INT3_INSN_OPCODE: + break; + + case CALL_INSN_OPCODE: + case JMP32_INSN_OPCODE: + case JMP8_INSN_OPCODE: + tp->rel32 = insn.immediate.value; + break; + + default: /* assume NOP */ + switch (len) { + case 2: /* NOP2 -- emulate as JMP8+0 */ + BUG_ON(memcmp(emulate, ideal_nops[len], len)); + tp->opcode = JMP8_INSN_OPCODE; + tp->rel32 = 0; + break; + + case 5: /* NOP5 -- emulate as JMP32+0 */ + BUG_ON(memcmp(emulate, ideal_nops[NOP_ATOMIC5], len)); + tp->opcode = JMP32_INSN_OPCODE; + tp->rel32 = 0; + break; + + default: /* unknown instruction */ + BUG(); + } + break; + } +} + /** * text_poke_bp() -- update instructions on live kernel on SMP * @addr: address to patch @@ -1098,20 +1178,10 @@ void text_poke_bp_batch(struct text_poke_loc *tp, unsigned int nr_entries) * dynamically allocated memory. This function should be used when it is * not possible to allocate memory. */ -void text_poke_bp(void *addr, const void *opcode, size_t len, void *handler) +void text_poke_bp(void *addr, const void *opcode, size_t len, const void *emulate) { - struct text_poke_loc tp = { - .detour = handler, - .addr = addr, - .len = len, - }; - - if (len > POKE_MAX_OPCODE_SIZE) { - WARN_ONCE(1, "len is larger than %d\n", POKE_MAX_OPCODE_SIZE); - return; - } - - memcpy((void *)tp.opcode, opcode, len); + struct text_poke_loc tp; + text_poke_loc_init(&tp, addr, opcode, len, emulate); text_poke_bp_batch(&tp, 1); } diff --git a/arch/x86/kernel/amd_gart_64.c b/arch/x86/kernel/amd_gart_64.c index 5cfab41e8509..4e5f50236048 100644 --- a/arch/x86/kernel/amd_gart_64.c +++ b/arch/x86/kernel/amd_gart_64.c @@ -510,10 +510,9 @@ static __init unsigned long check_iommu_size(unsigned long aper, u64 aper_size) iommu_size -= round_up(a, PMD_PAGE_SIZE) - a; if (iommu_size < 64*1024*1024) { - pr_warning( - "PCI-DMA: Warning: Small IOMMU %luMB." + pr_warn("PCI-DMA: Warning: Small IOMMU %luMB." " Consider increasing the AGP aperture in BIOS\n", - iommu_size >> 20); + iommu_size >> 20); } return iommu_size; @@ -665,8 +664,7 @@ static __init int init_amd_gatt(struct agp_kern_info *info) nommu: /* Should not happen anymore */ - pr_warning("PCI-DMA: More than 4GB of RAM and no IOMMU\n" - "falling back to iommu=soft.\n"); + pr_warn("PCI-DMA: More than 4GB of RAM and no IOMMU - falling back to iommu=soft.\n"); return -1; } @@ -733,8 +731,8 @@ int __init gart_iommu_init(void) !gart_iommu_aperture || (no_agp && init_amd_gatt(&info) < 0)) { if (max_pfn > MAX_DMA32_PFN) { - pr_warning("More than 4GB of memory but GART IOMMU not available.\n"); - pr_warning("falling back to iommu=soft.\n"); + pr_warn("More than 4GB of memory but GART IOMMU not available.\n"); + pr_warn("falling back to iommu=soft.\n"); } return 0; } diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index 9e2dd2b296cd..28446fa6bf18 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -780,8 +780,8 @@ calibrate_by_pmtimer(long deltapm, long *delta, long *deltatsc) res = (((u64)deltapm) * mult) >> 22; do_div(res, 1000000); - pr_warning("APIC calibration not consistent " - "with PM-Timer: %ldms instead of 100ms\n",(long)res); + pr_warn("APIC calibration not consistent " + "with PM-Timer: %ldms instead of 100ms\n", (long)res); /* Correct the lapic counter value */ res = (((u64)(*delta)) * pm_100ms); @@ -977,7 +977,7 @@ static int __init calibrate_APIC_clock(void) */ if (lapic_timer_period < (1000000 / HZ)) { local_irq_enable(); - pr_warning("APIC frequency too slow, disabling apic timer\n"); + pr_warn("APIC frequency too slow, disabling apic timer\n"); return -1; } @@ -1021,7 +1021,7 @@ static int __init calibrate_APIC_clock(void) local_irq_enable(); if (levt->features & CLOCK_EVT_FEAT_DUMMY) { - pr_warning("APIC timer disabled due to verification failure\n"); + pr_warn("APIC timer disabled due to verification failure\n"); return -1; } @@ -1095,8 +1095,8 @@ static void local_apic_timer_interrupt(void) * spurious. */ if (!evt->event_handler) { - pr_warning("Spurious LAPIC timer interrupt on cpu %d\n", - smp_processor_id()); + pr_warn("Spurious LAPIC timer interrupt on cpu %d\n", + smp_processor_id()); /* Switch it off */ lapic_timer_shutdown(evt); return; @@ -1586,9 +1586,6 @@ static void setup_local_APIC(void) { int cpu = smp_processor_id(); unsigned int value; -#ifdef CONFIG_X86_32 - int logical_apicid, ldr_apicid; -#endif if (disable_apic) { disable_ioapic_support(); @@ -1626,16 +1623,21 @@ static void setup_local_APIC(void) apic->init_apic_ldr(); #ifdef CONFIG_X86_32 - /* - * APIC LDR is initialized. If logical_apicid mapping was - * initialized during get_smp_config(), make sure it matches the - * actual value. - */ - logical_apicid = early_per_cpu(x86_cpu_to_logical_apicid, cpu); - ldr_apicid = GET_APIC_LOGICAL_ID(apic_read(APIC_LDR)); - WARN_ON(logical_apicid != BAD_APICID && logical_apicid != ldr_apicid); - /* always use the value from LDR */ - early_per_cpu(x86_cpu_to_logical_apicid, cpu) = ldr_apicid; + if (apic->dest_logical) { + int logical_apicid, ldr_apicid; + + /* + * APIC LDR is initialized. If logical_apicid mapping was + * initialized during get_smp_config(), make sure it matches + * the actual value. + */ + logical_apicid = early_per_cpu(x86_cpu_to_logical_apicid, cpu); + ldr_apicid = GET_APIC_LOGICAL_ID(apic_read(APIC_LDR)); + if (logical_apicid != BAD_APICID) + WARN_ON(logical_apicid != ldr_apicid); + /* Always use the value from LDR. */ + early_per_cpu(x86_cpu_to_logical_apicid, cpu) = ldr_apicid; + } #endif /* @@ -1809,11 +1811,11 @@ static int __init setup_nox2apic(char *str) int apicid = native_apic_msr_read(APIC_ID); if (apicid >= 255) { - pr_warning("Apicid: %08x, cannot enforce nox2apic\n", - apicid); + pr_warn("Apicid: %08x, cannot enforce nox2apic\n", + apicid); return 0; } - pr_warning("x2apic already enabled.\n"); + pr_warn("x2apic already enabled.\n"); __x2apic_disable(); } setup_clear_cpu_cap(X86_FEATURE_X2APIC); @@ -1981,7 +1983,7 @@ static int __init apic_verify(void) */ features = cpuid_edx(1); if (!(features & (1 << X86_FEATURE_APIC))) { - pr_warning("Could not enable APIC!\n"); + pr_warn("Could not enable APIC!\n"); return -1; } set_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC); @@ -2335,7 +2337,7 @@ static int cpuid_to_apicid[] = { #ifdef CONFIG_SMP /** * apic_id_is_primary_thread - Check whether APIC ID belongs to a primary thread - * @id: APIC ID to check + * @apicid: APIC ID to check */ bool apic_id_is_primary_thread(unsigned int apicid) { @@ -2408,9 +2410,8 @@ int generic_processor_info(int apicid, int version) disabled_cpu_apicid == apicid) { int thiscpu = num_processors + disabled_cpus; - pr_warning("APIC: Disabling requested cpu." - " Processor %d/0x%x ignored.\n", - thiscpu, apicid); + pr_warn("APIC: Disabling requested cpu." + " Processor %d/0x%x ignored.\n", thiscpu, apicid); disabled_cpus++; return -ENODEV; @@ -2424,8 +2425,7 @@ int generic_processor_info(int apicid, int version) apicid != boot_cpu_physical_apicid) { int thiscpu = max + disabled_cpus - 1; - pr_warning( - "APIC: NR_CPUS/possible_cpus limit of %i almost" + pr_warn("APIC: NR_CPUS/possible_cpus limit of %i almost" " reached. Keeping one slot for boot cpu." " Processor %d/0x%x ignored.\n", max, thiscpu, apicid); @@ -2436,9 +2436,8 @@ int generic_processor_info(int apicid, int version) if (num_processors >= nr_cpu_ids) { int thiscpu = max + disabled_cpus; - pr_warning("APIC: NR_CPUS/possible_cpus limit of %i " - "reached. Processor %d/0x%x ignored |