diff options
Diffstat (limited to 'arch/x86/kernel')
66 files changed, 2264 insertions, 1187 deletions
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index 778c5b93676d..743642f1a36c 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -67,9 +67,9 @@ obj-$(CONFIG_PCI) += early-quirks.o apm-y := apm_32.o obj-$(CONFIG_APM) += apm.o obj-$(CONFIG_SMP) += smp.o -obj-$(CONFIG_SMP) += smpboot.o tsc_sync.o +obj-$(CONFIG_SMP) += smpboot.o +obj-$(CONFIG_SMP) += tsc_sync.o obj-$(CONFIG_SMP) += setup_percpu.o -obj-$(CONFIG_X86_64_SMP) += tsc_sync.o obj-$(CONFIG_X86_MPPARSE) += mpparse.o obj-y += apic/ obj-$(CONFIG_X86_REBOOTFIXUPS) += reboot_fixups_32.o @@ -109,6 +109,7 @@ obj-$(CONFIG_MICROCODE) += microcode.o obj-$(CONFIG_X86_CHECK_BIOS_CORRUPTION) += check.o obj-$(CONFIG_SWIOTLB) += pci-swiotlb.o +obj-$(CONFIG_OF) += devicetree.o ### # 64 bit specific files diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index b3a71137983a..9a966c579af5 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -72,6 +72,7 @@ u8 acpi_sci_flags __initdata; int acpi_sci_override_gsi __initdata; int acpi_skip_timer_override __initdata; int acpi_use_timer_override __initdata; +int acpi_fix_pin2_polarity __initdata; #ifdef CONFIG_X86_LOCAL_APIC static u64 acpi_lapic_addr __initdata = APIC_DEFAULT_PHYS_BASE; @@ -415,10 +416,15 @@ acpi_parse_int_src_ovr(struct acpi_subtable_header * header, return 0; } - if (acpi_skip_timer_override && - intsrc->source_irq == 0 && intsrc->global_irq == 2) { - printk(PREFIX "BIOS IRQ0 pin2 override ignored.\n"); - return 0; + if (intsrc->source_irq == 0 && intsrc->global_irq == 2) { + if (acpi_skip_timer_override) { + printk(PREFIX "BIOS IRQ0 pin2 override ignored.\n"); + return 0; + } + if (acpi_fix_pin2_polarity && (intsrc->inti_flags & ACPI_MADT_POLARITY_MASK)) { + intsrc->inti_flags &= ~ACPI_MADT_POLARITY_MASK; + printk(PREFIX "BIOS IRQ0 pin2 override: forcing polarity to high active.\n"); + } } mp_override_legacy_irq(intsrc->source_irq, @@ -589,14 +595,8 @@ static void acpi_map_cpu2node(acpi_handle handle, int cpu, int physid) nid = acpi_get_node(handle); if (nid == -1 || !node_online(nid)) return; -#ifdef CONFIG_X86_64 - apicid_to_node[physid] = nid; + set_apicid_to_node(physid, nid); numa_set_node(cpu, nid); -#else /* CONFIG_X86_32 */ - apicid_2_node[physid] = nid; - cpu_to_node_map[cpu] = nid; -#endif - #endif } diff --git a/arch/x86/kernel/amd_nb.c b/arch/x86/kernel/amd_nb.c index 0a99f7198bc3..ed3c2e5b714a 100644 --- a/arch/x86/kernel/amd_nb.c +++ b/arch/x86/kernel/amd_nb.c @@ -12,7 +12,7 @@ static u32 *flush_words; -struct pci_device_id amd_nb_misc_ids[] = { +const struct pci_device_id amd_nb_misc_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB_MISC) }, { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_10H_NB_MISC) }, { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_MISC) }, @@ -20,6 +20,11 @@ struct pci_device_id amd_nb_misc_ids[] = { }; EXPORT_SYMBOL(amd_nb_misc_ids); +static struct pci_device_id amd_nb_link_ids[] = { + { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_LINK) }, + {} +}; + const struct amd_nb_bus_dev_range amd_nb_bus_dev_ranges[] __initconst = { { 0x00, 0x18, 0x20 }, { 0xff, 0x00, 0x20 }, @@ -31,7 +36,7 @@ struct amd_northbridge_info amd_northbridges; EXPORT_SYMBOL(amd_northbridges); static struct pci_dev *next_northbridge(struct pci_dev *dev, - struct pci_device_id *ids) + const struct pci_device_id *ids) { do { dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev); @@ -45,7 +50,7 @@ int amd_cache_northbridges(void) { int i = 0; struct amd_northbridge *nb; - struct pci_dev *misc; + struct pci_dev *misc, *link; if (amd_nb_num()) return 0; @@ -64,10 +69,12 @@ int amd_cache_northbridges(void) amd_northbridges.nb = nb; amd_northbridges.num = i; - misc = NULL; + link = misc = NULL; for (i = 0; i != amd_nb_num(); i++) { node_to_amd_nb(i)->misc = misc = next_northbridge(misc, amd_nb_misc_ids); + node_to_amd_nb(i)->link = link = + next_northbridge(link, amd_nb_link_ids); } /* some CPU families (e.g. family 0x11) do not support GART */ @@ -85,6 +92,13 @@ int amd_cache_northbridges(void) boot_cpu_data.x86_mask >= 0x1)) amd_northbridges.flags |= AMD_NB_L3_INDEX_DISABLE; + if (boot_cpu_data.x86 == 0x15) + amd_northbridges.flags |= AMD_NB_L3_INDEX_DISABLE; + + /* L3 cache partitioning is supported on family 0x15 */ + if (boot_cpu_data.x86 == 0x15) + amd_northbridges.flags |= AMD_NB_L3_PARTITIONING; + return 0; } EXPORT_SYMBOL_GPL(amd_cache_northbridges); @@ -93,8 +107,9 @@ EXPORT_SYMBOL_GPL(amd_cache_northbridges); they're useless anyways */ int __init early_is_amd_nb(u32 device) { - struct pci_device_id *id; + const struct pci_device_id *id; u32 vendor = device & 0xffff; + device >>= 16; for (id = amd_nb_misc_ids; id->vendor; id++) if (vendor == id->vendor && device == id->device) @@ -102,6 +117,65 @@ int __init early_is_amd_nb(u32 device) return 0; } +int amd_get_subcaches(int cpu) +{ + struct pci_dev *link = node_to_amd_nb(amd_get_nb_id(cpu))->link; + unsigned int mask; + int cuid = 0; + + if (!amd_nb_has_feature(AMD_NB_L3_PARTITIONING)) + return 0; + + pci_read_config_dword(link, 0x1d4, &mask); + +#ifdef CONFIG_SMP + cuid = cpu_data(cpu).compute_unit_id; +#endif + return (mask >> (4 * cuid)) & 0xf; +} + +int amd_set_subcaches(int cpu, int mask) +{ + static unsigned int reset, ban; + struct amd_northbridge *nb = node_to_amd_nb(amd_get_nb_id(cpu)); + unsigned int reg; + int cuid = 0; + + if (!amd_nb_has_feature(AMD_NB_L3_PARTITIONING) || mask > 0xf) + return -EINVAL; + + /* if necessary, collect reset state of L3 partitioning and BAN mode */ + if (reset == 0) { + pci_read_config_dword(nb->link, 0x1d4, &reset); + pci_read_config_dword(nb->misc, 0x1b8, &ban); + ban &= 0x180000; + } + + /* deactivate BAN mode if any subcaches are to be disabled */ + if (mask != 0xf) { + pci_read_config_dword(nb->misc, 0x1b8, ®); + pci_write_config_dword(nb->misc, 0x1b8, reg & ~0x180000); + } + +#ifdef CONFIG_SMP + cuid = cpu_data(cpu).compute_unit_id; +#endif + mask <<= 4 * cuid; + mask |= (0xf ^ (1 << cuid)) << 26; + + pci_write_config_dword(nb->link, 0x1d4, mask); + + /* reset BAN mode if L3 partitioning returned to reset state */ + pci_read_config_dword(nb->link, 0x1d4, ®); + if (reg == reset) { + pci_read_config_dword(nb->misc, 0x1b8, ®); + reg &= ~0x180000; + pci_write_config_dword(nb->misc, 0x1b8, reg | ban); + } + + return 0; +} + int amd_cache_gart(void) { int i; diff --git a/arch/x86/kernel/apb_timer.c b/arch/x86/kernel/apb_timer.c index 51ef31a89be9..1293c709ee85 100644 --- a/arch/x86/kernel/apb_timer.c +++ b/arch/x86/kernel/apb_timer.c @@ -284,7 +284,7 @@ static int __init apbt_clockevent_register(void) memcpy(&adev->evt, &apbt_clockevent, sizeof(struct clock_event_device)); if (mrst_timer_options == MRST_TIMER_LAPIC_APBT) { - apbt_clockevent.rating = APBT_CLOCKEVENT_RATING - 100; + adev->evt.rating = APBT_CLOCKEVENT_RATING - 100; global_clock_event = &adev->evt; printk(KERN_DEBUG "%s clockevent registered as global\n", global_clock_event->name); @@ -508,64 +508,12 @@ static int apbt_next_event(unsigned long delta, return 0; } -/* - * APB timer clock is not in sync with pclk on Langwell, which translates to - * unreliable read value caused by sampling error. the error does not add up - * overtime and only happens when sampling a 0 as a 1 by mistake. so the time - * would go backwards. the following code is trying to prevent time traveling - * backwards. little bit paranoid. - */ static cycle_t apbt_read_clocksource(struct clocksource *cs) { - unsigned long t0, t1, t2; - static unsigned long last_read; - -bad_count: - t1 = apbt_readl(phy_cs_timer_id, - APBTMR_N_CURRENT_VALUE); - t2 = apbt_readl(phy_cs_timer_id, - APBTMR_N_CURRENT_VALUE); - if (unlikely(t1 < t2)) { - pr_debug("APBT: read current count error %lx:%lx:%lx\n", - t1, t2, t2 - t1); - goto bad_count; - } - /* - * check against cached last read, makes sure time does not go back. - * it could be a normal rollover but we will do tripple check anyway - */ - if (unlikely(t2 > last_read)) { - /* check if we have a normal rollover */ - unsigned long raw_intr_status = - apbt_readl_reg(APBTMRS_RAW_INT_STATUS); - /* - * cs timer interrupt is masked but raw intr bit is set if - * rollover occurs. then we read EOI reg to clear it. - */ - if (raw_intr_status & (1 << phy_cs_timer_id)) { - apbt_readl(phy_cs_timer_id, APBTMR_N_EOI); - goto out; - } - pr_debug("APB CS going back %lx:%lx:%lx ", - t2, last_read, t2 - last_read); -bad_count_x3: - pr_debug("triple check enforced\n"); - t0 = apbt_readl(phy_cs_timer_id, - APBTMR_N_CURRENT_VALUE); - udelay(1); - t1 = apbt_readl(phy_cs_timer_id, - APBTMR_N_CURRENT_VALUE); - udelay(1); - t2 = apbt_readl(phy_cs_timer_id, - APBTMR_N_CURRENT_VALUE); - if ((t2 > t1) || (t1 > t0)) { - printk(KERN_ERR "Error: APB CS tripple check failed\n"); - goto bad_count_x3; - } - } -out: - last_read = t2; - return (cycle_t)~t2; + unsigned long current_count; + + current_count = apbt_readl(phy_cs_timer_id, APBTMR_N_CURRENT_VALUE); + return (cycle_t)~current_count; } static int apbt_clocksource_register(void) diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c index 5955a7800a96..7b1e8e10b89c 100644 --- a/arch/x86/kernel/aperture_64.c +++ b/arch/x86/kernel/aperture_64.c @@ -13,7 +13,7 @@ #include <linux/kernel.h> #include <linux/types.h> #include <linux/init.h> -#include <linux/bootmem.h> +#include <linux/memblock.h> #include <linux/mmzone.h> #include <linux/pci_ids.h> #include <linux/pci.h> @@ -57,7 +57,7 @@ static void __init insert_aperture_resource(u32 aper_base, u32 aper_size) static u32 __init allocate_aperture(void) { u32 aper_size; - void *p; + unsigned long addr; /* aper_size should <= 1G */ if (fallback_aper_order > 5) @@ -83,27 +83,26 @@ static u32 __init allocate_aperture(void) * so don't use 512M below as gart iommu, leave the space for kernel * code for safe */ - p = __alloc_bootmem_nopanic(aper_size, aper_size, 512ULL<<20); + addr = memblock_find_in_range(0, 1ULL<<32, aper_size, 512ULL<<20); + if (addr == MEMBLOCK_ERROR || addr + aper_size > 0xffffffff) { + printk(KERN_ERR + "Cannot allocate aperture memory hole (%lx,%uK)\n", + addr, aper_size>>10); + return 0; + } + memblock_x86_reserve_range(addr, addr + aper_size, "aperture64"); /* * Kmemleak should not scan this block as it may not be mapped via the * kernel direct mapping. */ - kmemleak_ignore(p); - if (!p || __pa(p)+aper_size > 0xffffffff) { - printk(KERN_ERR - "Cannot allocate aperture memory hole (%p,%uK)\n", - p, aper_size>>10); - if (p) - free_bootmem(__pa(p), aper_size); - return 0; - } + kmemleak_ignore(phys_to_virt(addr)); printk(KERN_INFO "Mapping aperture over %d KB of RAM @ %lx\n", - aper_size >> 10, __pa(p)); - insert_aperture_resource((u32)__pa(p), aper_size); - register_nosave_region((u32)__pa(p) >> PAGE_SHIFT, - (u32)__pa(p+aper_size) >> PAGE_SHIFT); + aper_size >> 10, addr); + insert_aperture_resource((u32)addr, aper_size); + register_nosave_region(addr >> PAGE_SHIFT, + (addr+aper_size) >> PAGE_SHIFT); - return (u32)__pa(p); + return (u32)addr; } diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index 76b96d74978a..966673f44141 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -43,6 +43,7 @@ #include <asm/i8259.h> #include <asm/proto.h> #include <asm/apic.h> +#include <asm/io_apic.h> #include <asm/desc.h> #include <asm/hpet.h> #include <asm/idle.h> @@ -78,12 +79,21 @@ EXPORT_EARLY_PER_CPU_SYMBOL(x86_cpu_to_apicid); EXPORT_EARLY_PER_CPU_SYMBOL(x86_bios_cpu_apicid); #ifdef CONFIG_X86_32 + +/* + * On x86_32, the mapping between cpu and logical apicid may vary + * depending on apic in use. The following early percpu variable is + * used for the mapping. This is where the behaviors of x86_64 and 32 + * actually diverge. Let's keep it ugly for now. + */ +DEFINE_EARLY_PER_CPU(int, x86_cpu_to_logical_apicid, BAD_APICID); + /* * Knob to control our willingness to enable the local APIC. * * +1=force-enable */ -static int force_enable_local_apic; +static int force_enable_local_apic __initdata; /* * APIC command line parameters */ @@ -153,7 +163,7 @@ early_param("nox2apic", setup_nox2apic); unsigned long mp_lapic_addr; int disable_apic; /* Disable local APIC timer from the kernel commandline or via dmi quirk */ -static int disable_apic_timer __cpuinitdata; +static int disable_apic_timer __initdata; /* Local APIC timer works in C2 */ int local_apic_timer_c2_ok; EXPORT_SYMBOL_GPL(local_apic_timer_c2_ok); @@ -177,29 +187,8 @@ static struct resource lapic_resource = { static unsigned int calibration_result; -static int lapic_next_event(unsigned long delta, - struct clock_event_device *evt); -static void lapic_timer_setup(enum clock_event_mode mode, - struct clock_event_device *evt); -static void lapic_timer_broadcast(const struct cpumask *mask); static void apic_pm_activate(void); -/* - * The local apic timer can be used for any function which is CPU local. - */ -static struct clock_event_device lapic_clockevent = { - .name = "lapic", - .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT - | CLOCK_EVT_FEAT_C3STOP | CLOCK_EVT_FEAT_DUMMY, - .shift = 32, - .set_mode = lapic_timer_setup, - .set_next_event = lapic_next_event, - .broadcast = lapic_timer_broadcast, - .rating = 100, - .irq = -1, -}; -static DEFINE_PER_CPU(struct clock_event_device, lapic_events); - static unsigned long apic_phys; /* @@ -238,7 +227,7 @@ static int modern_apic(void) * right after this call apic become NOOP driven * so apic->write/read doesn't do anything */ -void apic_disable(void) +static void __init apic_disable(void) { pr_info("APIC: switched to apic NOOP\n"); apic = &apic_noop; @@ -282,23 +271,6 @@ u64 native_apic_icr_read(void) return icr1 | ((u64)icr2 << 32); } -/** - * enable_NMI_through_LVT0 - enable NMI through local vector table 0 - */ -void __cpuinit enable_NMI_through_LVT0(void) -{ - unsigned int v; - - /* unmask and set to NMI */ - v = APIC_DM_NMI; - - /* Level triggered for 82489DX (32bit mode) */ - if (!lapic_is_integrated()) - v |= APIC_LVT_LEVEL_TRIGGER; - - apic_write(APIC_LVT0, v); -} - #ifdef CONFIG_X86_32 /** * get_physical_broadcast - Get number of physical broadcast IDs @@ -508,6 +480,23 @@ static void lapic_timer_broadcast(const struct cpumask *mask) #endif } + +/* + * The local apic timer can be used for any function which is CPU local. + */ +static struct clock_event_device lapic_clockevent = { + .name = "lapic", + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT + | CLOCK_EVT_FEAT_C3STOP | CLOCK_EVT_FEAT_DUMMY, + .shift = 32, + .set_mode = lapic_timer_setup, + .set_next_event = lapic_next_event, + .broadcast = lapic_timer_broadcast, + .rating = 100, + .irq = -1, +}; +static DEFINE_PER_CPU(struct clock_event_device, lapic_events); + /* * Setup the local APIC timer for this CPU. Copy the initialized values * of the boot CPU and register the clock event in the framework. @@ -1209,7 +1198,7 @@ void __cpuinit setup_local_APIC(void) rdtscll(tsc); if (disable_apic) { - arch_disable_smp_support(); + disable_ioapic_sup |