diff options
Diffstat (limited to 'drivers/net/ethernet/intel/i40e/i40e_main.c')
| -rw-r--r-- | drivers/net/ethernet/intel/i40e/i40e_main.c | 233 |
1 files changed, 156 insertions, 77 deletions
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index e31adbc75f9c..be9a1467a1a1 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -69,12 +69,6 @@ static int i40e_reset(struct i40e_pf *pf); static void i40e_rebuild(struct i40e_pf *pf, bool reinit, bool lock_acquired); static void i40e_fdir_sb_setup(struct i40e_pf *pf); static int i40e_veb_get_bw_info(struct i40e_veb *veb); -static int i40e_add_del_cloud_filter(struct i40e_vsi *vsi, - struct i40e_cloud_filter *filter, - bool add); -static int i40e_add_del_cloud_filter_big_buf(struct i40e_vsi *vsi, - struct i40e_cloud_filter *filter, - bool add); static int i40e_get_capabilities(struct i40e_pf *pf, enum i40e_admin_queue_opc list_type); @@ -215,8 +209,8 @@ static int i40e_get_lump(struct i40e_pf *pf, struct i40e_lump_tracking *pile, if (!pile || needed == 0 || id >= I40E_PILE_VALID_BIT) { dev_info(&pf->pdev->dev, - "param err: pile=%p needed=%d id=0x%04x\n", - pile, needed, id); + "param err: pile=%s needed=%d id=0x%04x\n", + pile ? "<valid>" : "<null>", needed, id); return -EINVAL; } @@ -1380,14 +1374,7 @@ struct i40e_mac_filter *i40e_add_filter(struct i40e_vsi *vsi, ether_addr_copy(f->macaddr, macaddr); f->vlan = vlan; - /* If we're in overflow promisc mode, set the state directly - * to failed, so we don't bother to try sending the filter - * to the hardware. - */ - if (test_bit(__I40E_VSI_OVERFLOW_PROMISC, vsi->state)) - f->state = I40E_FILTER_FAILED; - else - f->state = I40E_FILTER_NEW; + f->state = I40E_FILTER_NEW; INIT_HLIST_NODE(&f->hlist); key = i40e_addr_to_hkey(macaddr); @@ -2116,17 +2103,16 @@ void i40e_aqc_del_filters(struct i40e_vsi *vsi, const char *vsi_name, * @list: the list of filters to send to firmware * @add_head: Position in the add hlist * @num_add: the number of filters to add - * @promisc_change: set to true on exit if promiscuous mode was forced on * * Send a request to firmware via AdminQ to add a chunk of filters. Will set - * promisc_changed to true if the firmware has run out of space for more - * filters. + * __I40E_VSI_OVERFLOW_PROMISC bit in vsi->state if the firmware has run out of + * space for more filters. */ static void i40e_aqc_add_filters(struct i40e_vsi *vsi, const char *vsi_name, struct i40e_aqc_add_macvlan_element_data *list, struct i40e_new_mac_filter *add_head, - int num_add, bool *promisc_changed) + int num_add) { struct i40e_hw *hw = &vsi->back->hw; int aq_err, fcnt; @@ -2136,7 +2122,6 @@ void i40e_aqc_add_filters(struct i40e_vsi *vsi, const char *vsi_name, fcnt = i40e_update_filter_state(num_add, list, add_head); if (fcnt != num_add) { - *promisc_changed = true; set_bit(__I40E_VSI_OVERFLOW_PROMISC, vsi->state); dev_warn(&vsi->back->pdev->dev, "Error %s adding RX filters on %s, promiscuous mode forced on\n", @@ -2177,11 +2162,13 @@ i40e_aqc_broadcast_filter(struct i40e_vsi *vsi, const char *vsi_name, NULL); } - if (aq_ret) + if (aq_ret) { + set_bit(__I40E_VSI_OVERFLOW_PROMISC, vsi->state); dev_warn(&vsi->back->pdev->dev, - "Error %s setting broadcast promiscuous mode on %s\n", + "Error %s, forcing overflow promiscuous on %s\n", i40e_aq_str(hw, hw->aq.asq_last_status), vsi_name); + } return aq_ret; } @@ -2267,9 +2254,9 @@ int i40e_sync_vsi_filters(struct i40e_vsi *vsi) struct i40e_mac_filter *f; struct i40e_new_mac_filter *new, *add_head = NULL; struct i40e_hw *hw = &vsi->back->hw; + bool old_overflow, new_overflow; unsigned int failed_filters = 0; unsigned int vlan_filters = 0; - bool promisc_changed = false; char vsi_name[16] = "PF"; int filter_list_len = 0; i40e_status aq_ret = 0; @@ -2291,6 +2278,8 @@ int i40e_sync_vsi_filters(struct i40e_vsi *vsi) usleep_range(1000, 2000); pf = vsi->back; + old_overflow = test_bit(__I40E_VSI_OVERFLOW_PROMISC, vsi->state); + if (vsi->netdev) { changed_flags = vsi->current_netdev_flags ^ vsi->netdev->flags; vsi->current_netdev_flags = vsi->netdev->flags; @@ -2423,12 +2412,6 @@ int i40e_sync_vsi_filters(struct i40e_vsi *vsi) num_add = 0; hlist_for_each_entry_safe(new, h, &tmp_add_list, hlist) { - if (test_bit(__I40E_VSI_OVERFLOW_PROMISC, - vsi->state)) { - new->state = I40E_FILTER_FAILED; - continue; - } - /* handle broadcast filters by updating the broadcast * promiscuous flag instead of adding a MAC filter. */ @@ -2464,15 +2447,14 @@ int i40e_sync_vsi_filters(struct i40e_vsi *vsi) /* flush a full buffer */ if (num_add == filter_list_len) { i40e_aqc_add_filters(vsi, vsi_name, add_list, - add_head, num_add, - &promisc_changed); + add_head, num_add); memset(add_list, 0, list_size); num_add = 0; } } if (num_add) { i40e_aqc_add_filters(vsi, vsi_name, add_list, add_head, - num_add, &promisc_changed); + num_add); } /* Now move all of the filters from the temp add list back to * the VSI's list. @@ -2501,24 +2483,16 @@ int i40e_sync_vsi_filters(struct i40e_vsi *vsi) } spin_unlock_bh(&vsi->mac_filter_hash_lock); - /* If promiscuous mode has changed, we need to calculate a new - * threshold for when we are safe to exit - */ - if (promisc_changed) - vsi->promisc_threshold = (vsi->active_filters * 3) / 4; - /* Check if we are able to exit overflow promiscuous mode. We can * safely exit if we didn't just enter, we no longer have any failed * filters, and we have reduced filters below the threshold value. */ - if (test_bit(__I40E_VSI_OVERFLOW_PROMISC, vsi->state) && - !promisc_changed && !failed_filters && - (vsi->active_filters < vsi->promisc_threshold)) { + if (old_overflow && !failed_filters && + vsi->active_filters < vsi->promisc_threshold) { dev_info(&pf->pdev->dev, "filter logjam cleared on %s, leaving overflow promiscuous mode\n", vsi_name); clear_bit(__I40E_VSI_OVERFLOW_PROMISC, vsi->state); - promisc_changed = true; vsi->promisc_threshold = 0; } @@ -2528,6 +2502,14 @@ int i40e_sync_vsi_filters(struct i40e_vsi *vsi) goto out; } + new_overflow = test_bit(__I40E_VSI_OVERFLOW_PROMISC, vsi->state); + + /* If we are entering overflow promiscuous, we need to calculate a new + * threshold for when we are safe to exit + */ + if (!old_overflow && new_overflow) + vsi->promisc_threshold = (vsi->active_filters * 3) / 4; + /* check for changes in promiscuous modes */ if (changed_flags & IFF_ALLMULTI) { bool cur_multipromisc; @@ -2548,12 +2530,11 @@ int i40e_sync_vsi_filters(struct i40e_vsi *vsi) } } - if ((changed_flags & IFF_PROMISC) || promisc_changed) { + if ((changed_flags & IFF_PROMISC) || old_overflow != new_overflow) { bool cur_promisc; cur_promisc = (!!(vsi->current_netdev_flags & IFF_PROMISC) || - test_bit(__I40E_VSI_OVERFLOW_PROMISC, - vsi->state)); + new_overflow); aq_ret = i40e_set_promiscuous(pf, cur_promisc); if (aq_ret) { retval = i40e_aq_rc_to_posix(aq_ret, @@ -3449,15 +3430,20 @@ static void i40e_vsi_configure_msix(struct i40e_vsi *vsi) for (i = 0; i < vsi->num_q_vectors; i++, vector++) { struct i40e_q_vector *q_vector = vsi->q_vectors[i]; - q_vector->itr_countdown = ITR_COUNTDOWN_START; - q_vector->rx.itr = ITR_TO_REG(vsi->rx_rings[i]->rx_itr_setting); - q_vector->rx.latency_range = I40E_LOW_LATENCY; + q_vector->rx.next_update = jiffies + 1; + q_vector->rx.target_itr = + ITR_TO_REG(vsi->rx_rings[i]->itr_setting); wr32(hw, I40E_PFINT_ITRN(I40E_RX_ITR, vector - 1), - q_vector->rx.itr); - q_vector->tx.itr = ITR_TO_REG(vsi->tx_rings[i]->tx_itr_setting); - q_vector->tx.latency_range = I40E_LOW_LATENCY; + q_vector->rx.target_itr); + q_vector->rx.current_itr = q_vector->rx.target_itr; + + q_vector->tx.next_update = jiffies + 1; + q_vector->tx.target_itr = + ITR_TO_REG(vsi->tx_rings[i]->itr_setting); wr32(hw, I40E_PFINT_ITRN(I40E_TX_ITR, vector - 1), - q_vector->tx.itr); + q_vector->tx.target_itr); + q_vector->tx.current_itr = q_vector->tx.target_itr; + wr32(hw, I40E_PFINT_RATEN(vector - 1), i40e_intrl_usec_to_reg(vsi->int_rate_limit)); @@ -3558,13 +3544,14 @@ static void i40e_configure_msi_and_legacy(struct i40e_vsi *vsi) u32 val; /* set the ITR configuration */ - q_vector->itr_countdown = ITR_COUNTDOWN_START; - q_vector->rx.itr = ITR_TO_REG(vsi->rx_rings[0]->rx_itr_setting); - q_vector->rx.latency_range = I40E_LOW_LATENCY; - wr32(hw, I40E_PFINT_ITR0(I40E_RX_ITR), q_vector->rx.itr); - q_vector->tx.itr = ITR_TO_REG(vsi->tx_rings[0]->tx_itr_setting); - q_vector->tx.latency_range = I40E_LOW_LATENCY; - wr32(hw, I40E_PFINT_ITR0(I40E_TX_ITR), q_vector->tx.itr); + q_vector->rx.next_update = jiffies + 1; + q_vector->rx.target_itr = ITR_TO_REG(vsi->rx_rings[0]->itr_setting); + wr32(hw, I40E_PFINT_ITR0(I40E_RX_ITR), q_vector->rx.target_itr); + q_vector->rx.current_itr = q_vector->rx.target_itr; + q_vector->tx.next_update = jiffies + 1; + q_vector->tx.target_itr = ITR_TO_REG(vsi->tx_rings[0]->itr_setting); + wr32(hw, I40E_PFINT_ITR0(I40E_TX_ITR), q_vector->tx.target_itr); + q_vector->tx.current_itr = q_vector->tx.target_itr; i40e_enable_misc_int_causes(pf); @@ -5375,7 +5362,7 @@ out: * @vsi: VSI to be configured * **/ -int i40e_get_link_speed(struct i40e_vsi *vsi) +static int i40e_get_link_speed(struct i40e_vsi *vsi) { struct i40e_pf *pf = vsi->back; @@ -6560,6 +6547,75 @@ int i40e_up(struct i40e_vsi *vsi) } /** + * i40e_force_link_state - Force the link status + * @pf: board private structure + * @is_up: whether the link state should be forced up or down + **/ +static i40e_status i40e_force_link_state(struct i40e_pf *pf, bool is_up) +{ + struct i40e_aq_get_phy_abilities_resp abilities; + struct i40e_aq_set_phy_config config = {0}; + struct i40e_hw *hw = &pf->hw; + i40e_status err; + u64 mask; + + /* Get the current phy config */ + err = i40e_aq_get_phy_capabilities(hw, false, false, &abilities, + NULL); + if (err) { + dev_err(&pf->pdev->dev, + "failed to get phy cap., ret = %s last_status = %s\n", + i40e_stat_str(hw, err), + i40e_aq_str(hw, hw->aq.asq_last_status)); + return err; + } + + /* If link needs to go up, but was not forced to go down, + * no need for a flap + */ + if (is_up && abilities.phy_type != 0) + return I40E_SUCCESS; + + /* To force link we need to set bits for all supported PHY types, + * but there are now more than 32, so we need to split the bitmap + * across two fields. + */ + mask = I40E_PHY_TYPES_BITMASK; + config.phy_type = is_up ? cpu_to_le32((u32)(mask & 0xffffffff)) : 0; + config.phy_type_ext = is_up ? (u8)((mask >> 32) & 0xff) : 0; + /* Copy the old settings, except of phy_type */ + config.abilities = abilities.abilities; + config.link_speed = abilities.link_speed; + config.eee_capability = abilities.eee_capability; + config.eeer = abilities.eeer_val; + config.low_power_ctrl = abilities.d3_lpan; + err = i40e_aq_set_phy_config(hw, &config, NULL); + + if (err) { + dev_err(&pf->pdev->dev, + "set phy config ret = %s last_status = %s\n", + i40e_stat_str(&pf->hw, err), + i40e_aq_str(&pf->hw, pf->hw.aq.asq_last_status)); + return err; + } + + /* Update the link info */ + err = i40e_update_link_info(hw); + if (err) { + /* Wait a little bit (on 40G cards it sometimes takes a really + * long time for link to come back from the atomic reset) + * and try once more + */ + msleep(1000); + i40e_update_link_info(hw); + } + + i40e_aq_set_link_restart_an(hw, true, NULL); + + return I40E_SUCCESS; +} + +/** * i40e_down - Shutdown the connection processing * @vsi: the VSI being stopped **/ @@ -6576,6 +6632,9 @@ void i40e_down(struct i40e_vsi *vsi) } i40e_vsi_disable_irq(vsi); i40e_vsi_stop_rings(vsi); + if (vsi->type == I40E_VSI_MAIN && + vsi->back->flags & I40E_FLAG_LINK_DOWN_ON_CLOSE_ENABLED) + i40e_force_link_state(vsi->back, false); i40e_napi_disable_all(vsi); for (i = 0; i < vsi->num_queue_pairs; i++) { @@ -6848,8 +6907,8 @@ i40e_set_cld_element(struct i40e_cloud_filter *filter, * Add or delete a cloud filter for a specific flow spec. * Returns 0 if the filter were successfully added. **/ -static int i40e_add_del_cloud_filter(struct i40e_vsi *vsi, - struct i40e_cloud_filter *filter, bool add) +int i40e_add_del_cloud_filter(struct i40e_vsi *vsi, + struct i40e_cloud_filter *filter, bool add) { struct i40e_aqc_cloud_filters_element_data cld_filter; struct i40e_pf *pf = vsi->back; @@ -6915,9 +6974,9 @@ static int i40e_add_del_cloud_filter(struct i40e_vsi *vsi, * Add or delete a cloud filter for a specific flow spec using big buffer. * Returns 0 if the filter were successfully added. **/ -static int i40e_add_del_cloud_filter_big_buf(struct i40e_vsi *vsi, - struct i40e_cloud_filter *filter, - bool add) +int i40e_add_del_cloud_filter_big_buf(struct i40e_vsi *vsi, + struct i40e_cloud_filter *filter, + bool add) { struct i40e_aqc_cloud_filters_element_bb cld_filter; struct i40e_pf *pf = vsi->back; @@ -7537,6 +7596,9 @@ int i40e_open(struct net_device *netdev) netif_carrier_off(netdev); + if (i40e_force_link_state(pf, true)) + return -EAGAIN; + err = i40e_vsi_open(vsi); if (err) return err; @@ -9215,6 +9277,17 @@ static void i40e_rebuild(struct i40e_pf *pf, bool reinit, bool lock_acquired) } i40e_get_oem_version(&pf->hw); + if (test_bit(__I40E_EMP_RESET_INTR_RECEIVED, pf->state) && + ((hw->aq.fw_maj_ver == 4 && hw->aq.fw_min_ver <= 33) || + hw->aq.fw_maj_ver < 4) && hw->mac.type == I40E_MAC_XL710) { + /* The following delay is necessary for 4.33 firmware and older + * to recover after EMP reset. 200 ms should suffice but we + * put here 300 ms to be sure that FW is ready to operate + * after reset. + */ + mdelay(300); + } + /* re-verify the eeprom if we just had an EMP reset */ if (test_and_clear_bit(__I40E_EMP_RESET_INTR_RECEIVED, pf->state)) i40e_verify_eeprom(pf); @@ -9937,18 +10010,17 @@ static int i40e_vsi_clear(struct i40e_vsi *vsi) mutex_lock(&pf->switch_mutex); if (!pf->vsi[vsi->idx]) { - dev_err(&pf->pdev->dev, "pf->vsi[%d] is NULL, just free vsi[%d](%p,type %d)\n", - vsi->idx, vsi->idx, vsi, vsi->type); + dev_err(&pf->pdev->dev, "pf->vsi[%d] is NULL, just free vsi[%d](type %d)\n", + vsi->idx, vsi->idx, vsi->type); goto unlock_vsi; } if (pf->vsi[vsi->idx] != vsi) { dev_err(&pf->pdev->dev, - "pf->vsi[%d](%p, type %d) != vsi[%d](%p,type %d): no free!\n", + "pf->vsi[%d](type %d) != vsi[%d](type %d): no free!\n", pf->vsi[vsi->idx]->idx, - pf->vsi[vsi->idx], pf->vsi[vsi->idx]->type, - vsi->idx, vsi, vsi->type); + vsi->idx, vsi->type); goto unlock_vsi; } @@ -10018,7 +10090,7 @@ static int i40e_alloc_rings(struct i40e_vsi *vsi) ring->dcb_tc = 0; if (vsi->back->hw_features & I40E_HW_WB_ON_ITR_CAPABLE) ring->flags = I40E_TXR_FLAGS_WB_ON_ITR; - ring->tx_itr_setting = pf->tx_itr_default; + ring->itr_setting = pf->tx_itr_default; vsi->tx_rings[i] = ring++; if (!i40e_enabled_xdp_vsi(vsi)) @@ -10036,7 +10108,7 @@ static int i40e_alloc_rings(struct i40e_vsi *vsi) if (vsi->back->hw_features & I40E_HW_WB_ON_ITR_CAPABLE) ring->flags = I40E_TXR_FLAGS_WB_ON_ITR; set_ring_xdp(ring); - ring->tx_itr_setting = pf->tx_itr_default; + ring->itr_setting = pf->tx_itr_default; vsi->xdp_rings[i] = ring++; setup_rx: @@ -10049,7 +10121,7 @@ setup_rx: ring->count = vsi->num_desc; ring->size = 0; ring->dcb_tc = 0; - ring->rx_itr_setting = pf->rx_itr_default; + ring->itr_setting = pf->rx_itr_default; vsi->rx_rings[i] = ring; } @@ -10328,9 +10400,6 @@ static int i40e_vsi_alloc_q_vector(struct i40e_vsi *vsi, int v_idx, int cpu) netif_napi_add(vsi->netdev, &q_vector->napi, i40e_napi_poll, NAPI_POLL_WEIGHT); - q_vector->rx.latency_range = I40E_LOW_LATENCY; - q_vector->tx.latency_range = I40E_LOW_LATENCY; - /* tie q_vector and vsi together */ vsi->q_vectors[v_idx] = q_vector; @@ -11089,6 +11158,16 @@ static int i40e_sw_init(struct i40e_pf *pf) /* IWARP needs one extra vector for CQP just like MISC.*/ pf->num_iwarp_msix = (int)num_online_cpus() + 1; } + /* Stopping the FW LLDP engine is only supported on the + * XL710 with a FW ver >= 1.7. Also, stopping FW LLDP + * engine is not supported if NPAR is functioning on this + * part + */ + if (pf->hw.mac.type == I40E_MAC_XL710 && + !pf->hw.func_caps.npar_enable && + (pf->hw.aq.api_maj_ver > 1 || + (pf->hw.aq.api_maj_ver == 1 && pf->hw.aq.api_min_ver > 6))) + pf->hw_features |= I40E_HW_STOPPABLE_FW_LLDP; #ifdef CONFIG_PCI_IOV if (pf->hw.func_caps.num_vfs && pf->hw.partition_id == 1) { |
