diff options
Diffstat (limited to 'drivers/pci/controller/dwc')
| -rw-r--r-- | drivers/pci/controller/dwc/Kconfig | 431 | ||||
| -rw-r--r-- | drivers/pci/controller/dwc/pci-imx6.c | 7 | ||||
| -rw-r--r-- | drivers/pci/controller/dwc/pci-layerscape-ep.c | 1 | ||||
| -rw-r--r-- | drivers/pci/controller/dwc/pcie-designware.c | 10 | ||||
| -rw-r--r-- | drivers/pci/controller/dwc/pcie-qcom.c | 1246 |
5 files changed, 745 insertions, 950 deletions
diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig index 434f6a4f4041..ab96da43e0c2 100644 --- a/drivers/pci/controller/dwc/Kconfig +++ b/drivers/pci/controller/dwc/Kconfig @@ -1,6 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 -menu "DesignWare PCI Core Support" +menu "DesignWare-based PCIe controllers" depends on PCI config PCIE_DW @@ -14,88 +14,67 @@ config PCIE_DW_EP bool select PCIE_DW -config PCI_DRA7XX - tristate - -config PCI_DRA7XX_HOST - tristate "TI DRA7xx PCIe controller Host Mode" - depends on SOC_DRA7XX || COMPILE_TEST - depends on OF && HAS_IOMEM && TI_PIPE3 +config PCIE_AL + bool "Amazon Annapurna Labs PCIe controller" + depends on OF && (ARM64 || COMPILE_TEST) depends on PCI_MSI select PCIE_DW_HOST - select PCI_DRA7XX - default y if SOC_DRA7XX + select PCI_ECAM help - Enables support for the PCIe controller in the DRA7xx SoC to work in - host mode. There are two instances of PCIe controller in DRA7xx. - This controller can work either as EP or RC. In order to enable - host-specific features PCI_DRA7XX_HOST must be selected and in order - to enable device-specific features PCI_DRA7XX_EP must be selected. - This uses the DesignWare core. + Say Y here to enable support of the Amazon's Annapurna Labs PCIe + controller IP on Amazon SoCs. The PCIe controller uses the DesignWare + core plus Annapurna Labs proprietary hardware wrappers. This is + required only for DT-based platforms. ACPI platforms with the + Annapurna Labs PCIe controller don't need to enable this. -config PCI_DRA7XX_EP - tristate "TI DRA7xx PCIe controller Endpoint Mode" - depends on SOC_DRA7XX || COMPILE_TEST - depends on OF && HAS_IOMEM && TI_PIPE3 - depends on PCI_ENDPOINT - select PCIE_DW_EP - select PCI_DRA7XX +config PCI_MESON + tristate "Amlogic Meson PCIe controller" + default m if ARCH_MESON + depends on PCI_MSI + select PCIE_DW_HOST help - Enables support for the PCIe controller in the DRA7xx SoC to work in - endpoint mode. There are two instances of PCIe controller in DRA7xx. - This controller can work either as EP or RC. In order to enable - host-specific features PCI_DRA7XX_HOST must be selected and in order - to enable device-specific features PCI_DRA7XX_EP must be selected. - This uses the DesignWare core. + Say Y here if you want to enable PCI controller support on Amlogic + SoCs. The PCI controller on Amlogic is based on DesignWare hardware + and therefore the driver re-uses the DesignWare core functions to + implement the driver. -config PCIE_DW_PLAT +config PCIE_ARTPEC6 bool -config PCIE_DW_PLAT_HOST - bool "Platform bus based DesignWare PCIe Controller - Host mode" +config PCIE_ARTPEC6_HOST + bool "Axis ARTPEC-6 PCIe controller (host mode)" + depends on MACH_ARTPEC6 || COMPILE_TEST depends on PCI_MSI select PCIE_DW_HOST - select PCIE_DW_PLAT + select PCIE_ARTPEC6 help - Enables support for the PCIe controller in the Designware IP to - work in host mode. There are two instances of PCIe controller in - Designware IP. - This controller can work either as EP or RC. In order to enable - host-specific features PCIE_DW_PLAT_HOST must be selected and in - order to enable device-specific features PCI_DW_PLAT_EP must be - selected. + Enables support for the PCIe controller in the ARTPEC-6 SoC to work in + host mode. This uses the DesignWare core. -config PCIE_DW_PLAT_EP - bool "Platform bus based DesignWare PCIe Controller - Endpoint mode" - depends on PCI && PCI_MSI +config PCIE_ARTPEC6_EP + bool "Axis ARTPEC-6 PCIe controller (endpoint mode)" + depends on MACH_ARTPEC6 || COMPILE_TEST depends on PCI_ENDPOINT select PCIE_DW_EP - select PCIE_DW_PLAT + select PCIE_ARTPEC6 help - Enables support for the PCIe controller in the Designware IP to - work in endpoint mode. There are two instances of PCIe controller - in Designware IP. - This controller can work either as EP or RC. In order to enable - host-specific features PCIE_DW_PLAT_HOST must be selected and in - order to enable device-specific features PCI_DW_PLAT_EP must be - selected. + Enables support for the PCIe controller in the ARTPEC-6 SoC to work in + endpoint mode. This uses the DesignWare core. -config PCI_EXYNOS - tristate "Samsung Exynos PCIe controller" - depends on ARCH_EXYNOS || COMPILE_TEST +config PCIE_BT1 + tristate "Baikal-T1 PCIe controller" + depends on MIPS_BAIKAL_T1 || COMPILE_TEST depends on PCI_MSI select PCIE_DW_HOST help - Enables support for the PCIe controller in the Samsung Exynos SoCs - to work in host mode. The PCI controller is based on the DesignWare - hardware and therefore the driver re-uses the DesignWare core - functions to implement the driver. + Enables support for the PCIe controller in the Baikal-T1 SoC to work + in host mode. It's based on the Synopsys DWC PCIe v4.60a IP-core. config PCI_IMX6 bool config PCI_IMX6_HOST - bool "Freescale i.MX6/7/8 PCIe controller host mode" + bool "Freescale i.MX6/7/8 PCIe controller (host mode)" depends on ARCH_MXC || COMPILE_TEST depends on PCI_MSI select PCIE_DW_HOST @@ -107,7 +86,7 @@ config PCI_IMX6_HOST DesignWare core functions to implement the driver. config PCI_IMX6_EP - bool "Freescale i.MX6/7/8 PCIe controller endpoint mode" + bool "Freescale i.MX6/7/8 PCIe controller (endpoint mode)" depends on ARCH_MXC || COMPILE_TEST depends on PCI_ENDPOINT select PCIE_DW_EP @@ -118,43 +97,8 @@ config PCI_IMX6_EP on DesignWare hardware and therefore the driver re-uses the DesignWare core functions to implement the driver. -config PCIE_SPEAR13XX - bool "STMicroelectronics SPEAr PCIe controller" - depends on ARCH_SPEAR13XX || COMPILE_TEST - depends on PCI_MSI - select PCIE_DW_HOST - help - Say Y here if you want PCIe support on SPEAr13XX SoCs. - -config PCI_KEYSTONE - bool - -config PCI_KEYSTONE_HOST - bool "PCI Keystone Host Mode" - depends on ARCH_KEYSTONE || ARCH_K3 || COMPILE_TEST - depends on PCI_MSI - select PCIE_DW_HOST - select PCI_KEYSTONE - help - Enables support for the PCIe controller in the Keystone SoC to - work in host mode. The PCI controller on Keystone is based on - DesignWare hardware and therefore the driver re-uses the - DesignWare core functions to implement the driver. - -config PCI_KEYSTONE_EP - bool "PCI Keystone Endpoint Mode" - depends on ARCH_KEYSTONE || ARCH_K3 || COMPILE_TEST - depends on PCI_ENDPOINT - select PCIE_DW_EP - select PCI_KEYSTONE - help - Enables support for the PCIe controller in the Keystone SoC to - work in endpoint mode. The PCI controller on Keystone is based - on DesignWare hardware and therefore the driver re-uses the - DesignWare core functions to implement the driver. - config PCI_LAYERSCAPE - bool "Freescale Layerscape PCIe controller - Host mode" + bool "Freescale Layerscape PCIe controller (host mode)" depends on OF && (ARM || ARCH_LAYERSCAPE || COMPILE_TEST) depends on PCI_MSI select PCIE_DW_HOST @@ -167,7 +111,7 @@ config PCI_LAYERSCAPE controller works in RC mode. config PCI_LAYERSCAPE_EP - bool "Freescale Layerscape PCIe controller - Endpoint mode" + bool "Freescale Layerscape PCIe controller (endpoint mode)" depends on OF && (ARM || ARCH_LAYERSCAPE || COMPILE_TEST) depends on PCI_ENDPOINT select PCIE_DW_EP @@ -180,7 +124,7 @@ config PCI_LAYERSCAPE_EP config PCI_HISI depends on OF && (ARM64 || COMPILE_TEST) - bool "HiSilicon Hip05 and Hip06 SoCs PCIe controllers" + bool "HiSilicon Hip05 and Hip06 SoCs PCIe controller" depends on PCI_MSI select PCIE_DW_HOST select PCI_HOST_COMMON @@ -188,83 +132,26 @@ config PCI_HISI Say Y here if you want PCIe controller support on HiSilicon Hip05 and Hip06 SoCs -config PCIE_QCOM - bool "Qualcomm PCIe controller" - depends on OF && (ARCH_QCOM || COMPILE_TEST) - depends on PCI_MSI - select PCIE_DW_HOST - select CRC8 - help - Say Y here to enable PCIe controller support on Qualcomm SoCs. The - PCIe controller uses the DesignWare core plus Qualcomm-specific - hardware wrappers. - -config PCIE_QCOM_EP - tristate "Qualcomm PCIe controller - Endpoint mode" - depends on OF && (ARCH_QCOM || COMPILE_TEST) - depends on PCI_ENDPOINT - select PCIE_DW_EP - help - Say Y here to enable support for the PCIe controllers on Qualcomm SoCs - to work in endpoint mode. The PCIe controller uses the DesignWare core - plus Qualcomm-specific hardware wrappers. - -config PCIE_ARMADA_8K - bool "Marvell Armada-8K PCIe controller" - depends on ARCH_MVEBU || COMPILE_TEST - depends on PCI_MSI - select PCIE_DW_HOST - help - Say Y here if you want to enable PCIe controller support on - Armada-8K SoCs. The PCIe controller on Armada-8K is based on - DesignWare hardware and therefore the driver re-uses the - DesignWare core functions to implement the driver. - -config PCIE_ARTPEC6 - bool - -config PCIE_ARTPEC6_HOST - bool "Axis ARTPEC-6 PCIe controller Host Mode" - depends on MACH_ARTPEC6 || COMPILE_TEST +config PCIE_KIRIN + depends on OF && (ARM64 || COMPILE_TEST) + tristate "HiSilicon Kirin PCIe controller" depends on PCI_MSI select PCIE_DW_HOST - select PCIE_ARTPEC6 - help - Enables support for the PCIe controller in the ARTPEC-6 SoC to work in - host mode. This uses the DesignWare core. - -config PCIE_ARTPEC6_EP - bool "Axis ARTPEC-6 PCIe controller Endpoint Mode" - depends on MACH_ARTPEC6 || COMPILE_TEST - depends on PCI_ENDPOINT - select PCIE_DW_EP - select PCIE_ARTPEC6 + select REGMAP_MMIO help - Enables support for the PCIe controller in the ARTPEC-6 SoC to work in - endpoint mode. This uses the DesignWare core. + Say Y here if you want PCIe controller support + on HiSilicon Kirin series SoCs. -config PCIE_BT1 - tristate "Baikal-T1 PCIe controller" - depends on MIPS_BAIKAL_T1 || COMPILE_TEST +config PCIE_HISI_STB + bool "HiSilicon STB PCIe controller" + depends on ARCH_HISI || COMPILE_TEST depends on PCI_MSI select PCIE_DW_HOST help - Enables support for the PCIe controller in the Baikal-T1 SoC to work - in host mode. It's based on the Synopsys DWC PCIe v4.60a IP-core. - -config PCIE_ROCKCHIP_DW_HOST - bool "Rockchip DesignWare PCIe controller" - select PCIE_DW - select PCIE_DW_HOST - depends on PCI_MSI - depends on ARCH_ROCKCHIP || COMPILE_TEST - depends on OF - help - Enables support for the DesignWare PCIe controller in the - Rockchip SoC except RK3399. + Say Y here if you want PCIe controller support on HiSilicon STB SoCs config PCIE_INTEL_GW - bool "Intel Gateway PCIe host controller support" + bool "Intel Gateway PCIe controller " depends on OF && (X86 || COMPILE_TEST) depends on PCI_MSI select PCIE_DW_HOST @@ -278,7 +165,7 @@ config PCIE_KEEMBAY bool config PCIE_KEEMBAY_HOST - bool "Intel Keem Bay PCIe controller - Host mode" + bool "Intel Keem Bay PCIe controller (host mode)" depends on ARCH_KEEMBAY || COMPILE_TEST depends on PCI_MSI select PCIE_DW_HOST @@ -290,7 +177,7 @@ config PCIE_KEEMBAY_HOST DesignWare core functions. config PCIE_KEEMBAY_EP - bool "Intel Keem Bay PCIe controller - Endpoint mode" + bool "Intel Keem Bay PCIe controller (endpoint mode)" depends on ARCH_KEEMBAY || COMPILE_TEST depends on PCI_MSI depends on PCI_ENDPOINT @@ -302,39 +189,22 @@ config PCIE_KEEMBAY_EP The PCIe controller is based on DesignWare Hardware and uses DesignWare core functions. -config PCIE_KIRIN - depends on OF && (ARM64 || COMPILE_TEST) - tristate "HiSilicon Kirin series SoCs PCIe controllers" - depends on PCI_MSI - select PCIE_DW_HOST - help - Say Y here if you want PCIe controller support - on HiSilicon Kirin series SoCs. - -config PCIE_HISI_STB - bool "HiSilicon STB SoCs PCIe controllers" - depends on ARCH_HISI || COMPILE_TEST - depends on PCI_MSI - select PCIE_DW_HOST - help - Say Y here if you want PCIe controller support on HiSilicon STB SoCs - -config PCI_MESON - tristate "MESON PCIe controller" - default m if ARCH_MESON +config PCIE_ARMADA_8K + bool "Marvell Armada-8K PCIe controller" + depends on ARCH_MVEBU || COMPILE_TEST depends on PCI_MSI select PCIE_DW_HOST help - Say Y here if you want to enable PCI controller support on Amlogic - SoCs. The PCI controller on Amlogic is based on DesignWare hardware - and therefore the driver re-uses the DesignWare core functions to - implement the driver. + Say Y here if you want to enable PCIe controller support on + Armada-8K SoCs. The PCIe controller on Armada-8K is based on + DesignWare hardware and therefore the driver re-uses the + DesignWare core functions to implement the driver. config PCIE_TEGRA194 tristate config PCIE_TEGRA194_HOST - tristate "NVIDIA Tegra194 (and later) PCIe controller - Host Mode" + tristate "NVIDIA Tegra194 (and later) PCIe controller (host mode)" depends on ARCH_TEGRA_194_SOC || COMPILE_TEST depends on PCI_MSI select PCIE_DW_HOST @@ -349,7 +219,7 @@ config PCIE_TEGRA194_HOST selected. This uses the DesignWare core. config PCIE_TEGRA194_EP - tristate "NVIDIA Tegra194 (and later) PCIe controller - Endpoint Mode" + tristate "NVIDIA Tegra194 (and later) PCIe controller (endpoint mode)" depends on ARCH_TEGRA_194_SOC || COMPILE_TEST depends on PCI_ENDPOINT select PCIE_DW_EP @@ -363,17 +233,92 @@ config PCIE_TEGRA194_EP in order to enable device-specific features PCIE_TEGRA194_EP must be selected. This uses the DesignWare core. -config PCIE_VISCONTI_HOST - bool "Toshiba Visconti PCIe controllers" - depends on ARCH_VISCONTI || COMPILE_TEST +config PCIE_DW_PLAT + bool + +config PCIE_DW_PLAT_HOST + bool "Platform bus based DesignWare PCIe controller (host mode)" depends on PCI_MSI select PCIE_DW_HOST + select PCIE_DW_PLAT help - Say Y here if you want PCIe controller support on Toshiba Visconti SoC. - This driver supports TMPV7708 SoC. + Enables support for the PCIe controller in the Designware IP to + work in host mode. There are two instances of PCIe controller in + Designware IP. + This controller can work either as EP or RC. In order to enable + host-specific features PCIE_DW_PLAT_HOST must be selected and in + order to enable device-specific features PCI_DW_PLAT_EP must be + selected. + +config PCIE_DW_PLAT_EP + bool "Platform bus based DesignWare PCIe controller (endpoint mode)" + depends on PCI && PCI_MSI + depends on PCI_ENDPOINT + select PCIE_DW_EP + select PCIE_DW_PLAT + help + Enables support for the PCIe controller in the Designware IP to + work in endpoint mode. There are two instances of PCIe controller + in Designware IP. + This controller can work either as EP or RC. In order to enable + host-specific features PCIE_DW_PLAT_HOST must be selected and in + order to enable device-specific features PCI_DW_PLAT_EP must be + selected. + +config PCIE_QCOM + bool "Qualcomm PCIe controller (host mode)" + depends on OF && (ARCH_QCOM || COMPILE_TEST) + depends on PCI_MSI + select PCIE_DW_HOST + select CRC8 + help + Say Y here to enable PCIe controller support on Qualcomm SoCs. The + PCIe controller uses the DesignWare core plus Qualcomm-specific + hardware wrappers. + +config PCIE_QCOM_EP + tristate "Qualcomm PCIe controller (endpoint mode)" + depends on OF && (ARCH_QCOM || COMPILE_TEST) + depends on PCI_ENDPOINT + select PCIE_DW_EP + help + Say Y here to enable support for the PCIe controllers on Qualcomm SoCs + to work in endpoint mode. The PCIe controller uses the DesignWare core + plus Qualcomm-specific hardware wrappers. + +config PCIE_ROCKCHIP_DW_HOST + bool "Rockchip DesignWare PCIe controller" + select PCIE_DW + select PCIE_DW_HOST + depends on PCI_MSI + depends on ARCH_ROCKCHIP || COMPILE_TEST + depends on OF + help + Enables support for the DesignWare PCIe controller in the + Rockchip SoC except RK3399. + +config PCI_EXYNOS + tristate "Samsung Exynos PCIe controller" + depends on ARCH_EXYNOS || COMPILE_TEST + depends on PCI_MSI + select PCIE_DW_HOST + help + Enables support for the PCIe controller in the Samsung Exynos SoCs + to work in host mode. The PCI controller is based on the DesignWare + hardware and therefore the driver re-uses the DesignWare core + functions to implement the driver. + +config PCIE_FU740 + bool "SiFive FU740 PCIe controller" + depends on PCI_MSI + depends on SOC_SIFIVE || COMPILE_TEST + select PCIE_DW_HOST + help + Say Y here if you want PCIe controller support for the SiFive + FU740. config PCIE_UNIPHIER - bool "Socionext UniPhier PCIe host controllers" + bool "Socionext UniPhier PCIe controller (host mode)" depends on ARCH_UNIPHIER || COMPILE_TEST depends on OF && HAS_IOMEM depends on PCI_MSI @@ -383,7 +328,7 @@ config PCIE_UNIPHIER This driver supports LD20 and PXs3 SoCs. config PCIE_UNIPHIER_EP - bool "Socionext UniPhier PCIe endpoint controllers" + bool "Socionext UniPhier PCIe controller (endpoint mode)" depends on ARCH_UNIPHIER || COMPILE_TEST depends on OF && HAS_IOMEM depends on PCI_ENDPOINT @@ -392,26 +337,82 @@ config PCIE_UNIPHIER_EP Say Y here if you want PCIe endpoint controller support on UniPhier SoCs. This driver supports Pro5 SoC. -config PCIE_AL - bool "Amazon Annapurna Labs PCIe controller" - depends on OF && (ARM64 || COMPILE_TEST) +config PCIE_SPEAR13XX + bool "STMicroelectronics SPEAr PCIe controller" + depends on ARCH_SPEAR13XX || COMPILE_TEST depends on PCI_MSI select PCIE_DW_HOST - select PCI_ECAM help - Say Y here to enable support of the Amazon's Annapurna Labs PCIe - controller IP on Amazon SoCs. The PCIe controller uses the DesignWare - core plus Annapurna Labs proprietary hardware wrappers. This is - required only for DT-based platforms. ACPI platforms with the - Annapurna Labs PCIe controller don't need to enable this. + Say Y here if you want PCIe support on SPEAr13XX SoCs. -config PCIE_FU740 - bool "SiFive FU740 PCIe host controller" +config PCI_DRA7XX + tristate + +config PCI_DRA7XX_HOST + tristate "TI DRA7xx PCIe controller (host mode)" + depends on SOC_DRA7XX || COMPILE_TEST + depends on OF && HAS_IOMEM && TI_PIPE3 depends on PCI_MSI - depends on SOC_SIFIVE || COMPILE_TEST select PCIE_DW_HOST + select PCI_DRA7XX + default y if SOC_DRA7XX help - Say Y here if you want PCIe controller support for the SiFive - FU740. + Enables support for the PCIe controller in the DRA7xx SoC to work in + host mode. There are two instances of PCIe controller in DRA7xx. + This controller can work either as EP or RC. In order to enable + host-specific features PCI_DRA7XX_HOST must be selected and in order + to enable device-specific features PCI_DRA7XX_EP must be selected. + This uses the DesignWare core. + +config PCI_DRA7XX_EP + tristate "TI DRA7xx PCIe controller (endpoint mode)" + depends on SOC_DRA7XX || COMPILE_TEST + depends on OF && HAS_IOMEM && TI_PIPE3 + depends on PCI_ENDPOINT + select PCIE_DW_EP + select PCI_DRA7XX + help + Enables support for the PCIe controller in the DRA7xx SoC to work in + endpoint mode. There are two instances of PCIe controller in DRA7xx. + This controller can work either as EP or RC. In order to enable + host-specific features PCI_DRA7XX_HOST must be selected and in order + to enable device-specific features PCI_DRA7XX_EP must be selected. + This uses the DesignWare core. + +config PCI_KEYSTONE + bool + +config PCI_KEYSTONE_HOST + bool "TI Keystone PCIe controller (host mode)" + depends on ARCH_KEYSTONE || ARCH_K3 || COMPILE_TEST + depends on PCI_MSI + select PCIE_DW_HOST + select PCI_KEYSTONE + help + Enables support for the PCIe controller in the Keystone SoC to + work in host mode. The PCI controller on Keystone is based on + DesignWare hardware and therefore the driver re-uses the + DesignWare core functions to implement the driver. + +config PCI_KEYSTONE_EP + bool "TI Keystone PCIe controller (endpoint mode)" + depends on ARCH_KEYSTONE || ARCH_K3 || COMPILE_TEST + depends on PCI_ENDPOINT + select PCIE_DW_EP + select PCI_KEYSTONE + help + Enables support for the PCIe controller in the Keystone SoC to + work in endpoint mode. The PCI controller on Keystone is based + on DesignWare hardware and therefore the driver re-uses the + DesignWare core functions to implement the driver. + +config PCIE_VISCONTI_HOST + bool "Toshiba Visconti PCIe controller" + depends on ARCH_VISCONTI || COMPILE_TEST + depends on PCI_MSI + select PCIE_DW_HOST + help + Say Y here if you want PCIe controller support on Toshiba Visconti SoC. + This driver supports TMPV7708 SoC. endmenu diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c index 55a0405b921d..52906f999f2b 100644 --- a/drivers/pci/controller/dwc/pci-imx6.c +++ b/drivers/pci/controller/dwc/pci-imx6.c @@ -1566,6 +1566,13 @@ DECLARE_PCI_FIXUP_CLASS_HEADER(PCI_VENDOR_ID_SYNOPSYS, 0xabcd, static int __init imx6_pcie_init(void) { #ifdef CONFIG_ARM + struct device_node *np; + + np = of_find_matching_node(NULL, imx6_pcie_of_match); + if (!np) + return -ENODEV; + of_node_put(np); + /* * Since probe() can be deferred we need to make sure that * hook_fault_code is not called after __init memory is freed diff --git a/drivers/pci/controller/dwc/pci-layerscape-ep.c b/drivers/pci/controller/dwc/pci-layerscape-ep.c index ad99707b3b99..c640db60edc6 100644 --- a/drivers/pci/controller/dwc/pci-layerscape-ep.c +++ b/drivers/pci/controller/dwc/pci-layerscape-ep.c @@ -110,6 +110,7 @@ static const struct ls_pcie_ep_drvdata lx2_ep_drvdata = { }; static const struct of_device_id ls_pcie_ep_of_match[] = { + { .compatible = "fsl,ls1028a-pcie-ep", .data = &ls1_ep_drvdata }, { .compatible = "fsl,ls1046a-pcie-ep", .data = &ls1_ep_drvdata }, { .compatible = "fsl,ls1088a-pcie-ep", .data = &ls2_ep_drvdata }, { .compatible = "fsl,ls2088a-pcie-ep", .data = &ls2_ep_drvdata }, diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c index 53a16b8b6ac2..8e33e6e59e68 100644 --- a/drivers/pci/controller/dwc/pcie-designware.c +++ b/drivers/pci/controller/dwc/pcie-designware.c @@ -1001,11 +1001,6 @@ void dw_pcie_setup(struct dw_pcie *pci) dw_pcie_writel_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL, val); } - val = dw_pcie_readl_dbi(pci, PCIE_PORT_LINK_CONTROL); - val &= ~PORT_LINK_FAST_LINK_MODE; - val |= PORT_LINK_DLL_LINK_EN; - dw_pcie_writel_dbi(pci, PCIE_PORT_LINK_CONTROL, val); - if (dw_pcie_cap_is(pci, CDM_CHECK)) { val = dw_pcie_readl_dbi(pci, PCIE_PL_CHK_REG_CONTROL_STATUS); val |= PCIE_PL_CHK_REG_CHK_REG_CONTINUOUS | @@ -1013,6 +1008,11 @@ void dw_pcie_setup(struct dw_pcie *pci) dw_pcie_writel_dbi(pci, PCIE_PL_CHK_REG_CONTROL_STATUS, val); } + val = dw_pcie_readl_dbi(pci, PCIE_PORT_LINK_CONTROL); + val &= ~PORT_LINK_FAST_LINK_MODE; + val |= PORT_LINK_DLL_LINK_EN; + dw_pcie_writel_dbi(pci, PCIE_PORT_LINK_CONTROL, val); + if (!pci->num_lanes) { dev_dbg(pci->dev, "Using h/w default number of lanes\n"); return; diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c index a232b04af048..4ab30892f6ef 100644 --- a/drivers/pci/controller/dwc/pcie-qcom.c +++ b/drivers/pci/controller/dwc/pcie-qcom.c @@ -10,6 +10,7 @@ #include <linux/clk.h> #include <linux/crc8.h> +#include <linux/debugfs.h> #include <linux/delay.h> #include <linux/gpio/consumer.h> #include <linux/interconnect.h> @@ -33,7 +34,44 @@ #include "../../pci.h" #include "pcie-designware.h" -#define PCIE20_PARF_SYS_CTRL 0x00 +/* PARF registers */ +#define PARF_SYS_CTRL 0x00 +#define PARF_PM_CTRL 0x20 +#define PARF_PCS_DEEMPH 0x34 +#define PARF_PCS_SWING 0x38 +#define PARF_PHY_CTRL 0x40 +#define PARF_PHY_REFCLK 0x4c +#define PARF_CONFIG_BITS 0x50 +#define PARF_DBI_BASE_ADDR 0x168 +#define PARF_SLV_ADDR_SPACE_SIZE_2_3_3 0x16c /* Register offset specific to IP ver 2.3.3 */ +#define PARF_MHI_CLOCK_RESET_CTRL 0x174 +#define PARF_AXI_MSTR_WR_ADDR_HALT 0x178 +#define PARF_AXI_MSTR_WR_ADDR_HALT_V2 0x1a8 +#define PARF_Q2A_FLUSH 0x1ac +#define PARF_LTSSM 0x1b0 +#define PARF_SID_OFFSET 0x234 +#define PARF_BDF_TRANSLATE_CFG 0x24c +#define PARF_SLV_ADDR_SPACE_SIZE 0x358 +#define PARF_DEVICE_TYPE 0x1000 +#define PARF_BDF_TO_SID_TABLE_N 0x2000 + +/* ELBI registers */ +#define ELBI_SYS_CTRL 0x04 + +/* DBI registers */ +#define AXI_MSTR_RESP_COMP_CTRL0 0x818 +#define AXI_MSTR_RESP_COMP_CTRL1 0x81c +#define MISC_CONTROL_1_REG 0x8bc + +/* MHI registers */ +#define PARF_DEBUG_CNT_PM_LINKST_IN_L2 0xc04 +#define PARF_DEBUG_CNT_PM_LINKST_IN_L1 0xc0c +#define PARF_DEBUG_CNT_PM_LINKST_IN_L0S 0xc10 +#define PARF_DEBUG_CNT_AUX_CLK_IN_L1SUB_L1 0xc84 +#define PARF_DEBUG_CNT_AUX_CLK_IN_L1SUB_L2 0xc88 + +/* PARF_SYS_CTRL register fields */ +#define MAC_PHY_POWERDOWN_IN_P2_D_MUX_EN BIT(29) #define MST_WAKEUP_EN BIT(13) #define SLV_WAKEUP_EN BIT(12) #define MSTR_ACLK_CGC_DIS BIT(10) @@ -43,45 +81,63 @@ #define L23_CLK_RMV_DIS BIT(2) #define L1_CLK_RMV_DIS BIT(1) -#define PCIE20_PARF_PM_CTRL 0x20 +/* PARF_PM_CTRL register fields */ #define REQ_NOT_ENTR_L1 BIT(5) -#define PCIE20_PARF_PHY_CTRL 0x40 +/* PARF_PCS_DEEMPH register fields */ +#define PCS_DEEMPH_TX_DEEMPH_GEN1(x) FIELD_PREP(GENMASK(21, 16), x) +#define PCS_DEEMPH_TX_DEEMPH_GEN2_3_5DB(x) FIELD_PREP(GENMASK(13, 8), x) +#define PCS_DEEMPH_TX_DEEMPH_GEN2_6DB(x) FIELD_PREP(GENMASK(5, 0), x) + +/* PARF_PCS_SWING register fields */ +#define PCS_SWING_TX_SWING_FULL(x) FIELD_PREP(GENMASK(14, 8), x) +#define PCS_SWING_TX_SWING_LOW(x) FIELD_PREP(GENMASK(6, 0), x) + +/* PARF_PHY_CTRL register fields */ #define PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK GENMASK(20, 16) -#define PHY_CTRL_PHY_TX0_TERM_OFFSET(x) ((x) << 16) +#define PHY_CTRL_PHY_TX0_TERM_OFFSET(x) FIELD_PREP(PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK, x) +#define PHY_TEST_PWR_DOWN BIT(0) -#define PCIE20_PARF_PHY_REFCLK 0x4C +/* PARF_PHY_REFCLK register fields */ #define PHY_REFCLK_SSP_EN BIT(16) #define PHY_REFCLK_USE_PAD BIT(12) -#define PCIE20_PARF_DBI_BASE_ADDR 0x168 -#define PCIE20_PARF_SLV_ADDR_SPACE_SIZE 0x16C -#define PCIE20_PARF_MHI_CLOCK_RESET_CTRL 0x174 +/* PARF_CONFIG_BITS register fields */ +#define PHY_RX0_EQ(x) FIELD_PREP(GENMASK(26, 24), x) + +/* PARF_SLV_ADDR_SPACE_SIZE register value */ +#define SLV_ADDR_SPACE_SZ 0x10000000 + +/* PARF_MHI_CLOCK_RESET_CTRL register fields */ #define AHB_CLK_EN BIT(0) #define MSTR_AXI_CLK_EN BIT(1) #define BYPASS BIT(4) -#define PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT 0x178 -#define PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT_V2 0x1A8 -#define PCIE20_PARF_LTSSM 0x1B0 -#define PCIE20_PARF_SID_OFFSET 0x234 -#define PCIE20_PARF_BDF_TRANSLATE_CFG 0x24C -#define PCIE20_PARF_DEVICE_TYPE 0x1000 -#define PCIE20_PARF_BDF_TO_SID_TABLE_N 0x2000 +/* PARF_AXI_MSTR_WR_ADDR_HALT register fields */ +#define EN BIT(31) + +/* PARF_LTSSM register fields */ +#define LTSSM_EN BIT(8) -#define PCIE20_ELBI_SYS_CTRL 0x04 -#define PCIE20_ELBI_SYS_CTRL_LT_ENABLE BIT(0) +/* PARF_DEVICE_TYPE register fields */ +#define DEVICE_TYPE_RC 0x4 + +/* ELBI_SYS_CTRL register fields */ +#define ELBI_SYS_CTRL_LT_ENABLE BIT(0) -#define PCIE20_AXI_MSTR_RESP_COMP_CTRL0 0x818 +/* AXI_MSTR_RESP_COMP_CTRL0 register fields */ #define CFG_REMOTE_RD_REQ_BRIDGE_SIZE_2K 0x4 #define CFG_REMOTE_RD_REQ_BRIDGE_SIZE_4K 0x5 -#define PCIE20_AXI_MSTR_RESP_COMP_CTRL1 0x81c + +/* AXI_MSTR_RESP_COMP_CTRL1 register fields */ #define CFG_BRIDGE_SB_INIT BIT(0) -#define PCIE_CAP_SLOT_POWER_LIMIT_VAL FIELD_PREP(PCI_EXP_SLTCAP_SPLV, \ - 250) -#define PCIE_CAP_SLOT_POWER_LIMIT_SCALE FIELD_PREP(PCI_EXP_SLTCAP_SPLS, \ - 1) +/* MISC_CONTROL_1_REG register fields */ +#define DBI_RO_WR_EN 1 + +/* PCI_EXP_SLTCAP register fields */ +#define PCIE_CAP_SLOT_POWER_LIMIT_VAL FIELD_PREP(PCI_EXP_SLTCAP_SPLV, 250) +#define PCIE_CAP_SLOT_POWER_LIMIT_SCALE FIELD_PREP(PCI_EXP_SLTCAP_SPLS, 1) #define PCIE_CAP_SLOT_VAL (PCI_EXP_SLTCAP_ABP | \ PCI_EXP_SLTCAP_PCP | \ PCI_EXP_SLTCAP_MRLSP | \ @@ -93,103 +149,62 @@ PCIE_CAP_SLOT_POWER_LIMIT_VAL | \ PCIE_CAP_SLOT_POWER_LIMIT_SCALE) -#define PCIE20_PARF_Q2A_FLUSH 0x1AC - -#define PCIE20_MISC_CONTROL_1_REG 0x8BC -#define DBI_RO_WR_EN 1 - #define PERST_DELAY_US 1000 -/* PARF registers */ -#define PCIE20_PARF_PCS_DEEMPH 0x34 -#define PCS_DEEMPH_TX_DEEMPH_GEN1(x) ((x) << 16) -#define PCS_DEEMPH_TX_DEEMPH_GEN2_3_5DB(x) ((x) << 8) -#define PCS_DEEMPH_TX_DEEMPH_GEN2_6DB(x) ((x) << 0) -#define PCIE20_PARF_PCS_SWING 0x38 -#define PCS_SWING_TX_SWING_FULL(x) ((x) << 8) -#define PCS_SWING_TX_SWING_LOW(x) ((x) << 0) +#define QCOM_PCIE_CRC8_POLYNOMIAL (BIT(2) | BIT(1) | BIT(0)) -#define PCIE20_PARF_CONFIG_BITS 0x50 -#define PHY_RX0_EQ(x) ((x) << 24) - -#define PCIE20_v3_PARF_SLV_ADDR_SPACE_SIZE 0x358 -#define SLV_ADDR_SPACE_SZ 0x10000000 - -#define PCIE20_LNK_CONTROL2_LINK_STATUS2 0xa0 - -#define DEVICE_TYPE_RC 0x4 - -#define QCOM_PCIE_2_1_0_MAX_SUPPLY 3 -#define QCOM_PCIE_2_1_0_MAX_CLOCKS 5 - -#define QCOM_PCIE_CRC8_POLYNOMIAL (BIT(2) | BIT(1) | BIT(0)) +#define QCOM_PCIE_1_0_0_MAX_CLOCKS 4 +struct qcom_pcie_resources_1_0_0 { + struct clk_bulk_data clks[QCOM_PCIE_1_0_0_MAX_CLOCKS]; + struct reset_control *core; + struct regulator *vdda; +}; +#define QCOM_PCIE_2_1_0_MAX_CLOCKS 5 +#define QCOM_PCIE_2_1_0_MAX_RESETS 6 +#define QCOM_PCIE_2_1_0_MAX_SUPPLY 3 struct qcom_pcie_resources_2_1_0 { struct clk_bulk_data clks[QCOM_PCIE_2_1_0_MAX_CLOCKS]; - struct reset_control *pci_reset; - struct reset_control *axi_reset; - struct reset_control *ahb_reset; - struct reset_control *por_reset; - struct reset_control *phy_reset; - struct reset_control *ext_reset; + struct reset_control_bulk_data resets[QCOM_PCIE_2_1_0_MAX_RESETS]; + int num_resets; struct regulator_bulk_data supplies[QCOM_PCIE_2_1_0_MAX_SUPPLY]; }; -struct qcom_pcie_resources_1_0_0 { - struct clk *iface; - struct clk *aux; - struct clk *master_bus; - struct clk *slave_bus; - struct reset_control *core; - struct regulator *vdda; -}; - -#define QCOM_PCIE_2_3_2_MAX_SUPPLY 2 +#define QCOM_PCIE_2_3_2_MAX_CLOCKS 4 +#define QCOM_PCIE_2_3_2_MAX_SUPPLY 2 struct qcom_pcie_resources_2_3_2 { - struct clk *aux_clk; - struct clk *master_clk; - struct clk *slave_clk; - struct clk *cfg_clk; + struct clk_bulk_data clks[QCOM_PCIE_2_3_2_MAX_CLOCKS]; struct regulator_bulk_data supplies[QCOM_PCIE_2_3_2_MAX_SUPPLY]; }; -#define QCOM_PCIE_2_4_0_MAX_CLOCKS 4 +#define QCOM_PCIE_2_3_3_MAX_CLOCKS 5 +#define QCOM_PCIE_2_3_3_MAX_RESETS 7 +struct qcom_pcie_resources_2_3_3 { + struct clk_bulk_data clks[QCOM_PCIE_2_3_3_MAX_CLOCKS]; + struct reset_control_bulk_data rst[QCOM_PCIE_2_3_3_MAX_RESETS]; +}; + +#define QCOM_PCIE_2_4_0_MAX_CLOCKS 4 +#define QCOM_PCIE_2_4_0_MAX_RESETS 12 struct qcom_pcie_resources_2_4_0 { struct clk_bulk_data clks[QCOM_PCIE_2_4_0_MAX_CLOCKS]; int num_clks; - struct reset_control *axi_m_reset; - struct reset_control *axi_s_reset; - struct reset_control *pipe_reset; - struct reset_control *axi_m_vmid_reset; - struct reset_control *axi_s_xpu_reset; - struct reset_control *parf_reset; - struct reset_control *phy_reset; - struct reset_control *axi_m_sticky_reset; - struct reset_control *pipe_sticky_reset; - struct reset_control *pwr_reset; - struct reset_control *ahb_reset; - struct reset_control *phy_ahb_reset; -}; - -struct qcom_pcie_resources_2_3_3 { - struct clk *iface; - struct clk *axi_m_clk; - struct clk *axi_s_clk; - struct clk *ahb_clk; - struct clk *aux_clk; - struct reset_control *rst[7]; + struct reset_control_bulk_data resets[QCOM_PCIE_2_4_0_MAX_RESETS]; + int num_resets; }; -/* 6 clocks typically, 7 for sm8250 */ +#define QCOM_PCIE_2_7_0_MAX_CLOCKS 15 +#define QCOM_PCIE_2_7_0_MAX_SUPPLIES 2 struct qcom_pcie_resources_2_7_0 { - struct clk_bulk_data clks[12]; + struct clk_bulk_data clks[QCOM_PCIE_2_7_0_MAX_CLOCKS]; int num_clks; - struct regulator_bulk_data supplies[2]; - struct reset_control *pci_reset; + struct regulator_bulk_data supplies[QCOM_PCIE_2_7_0_MAX_SUPPLIES]; + struct reset_control *rst; }; +#define QCOM_PCIE_2_9_0_MAX_CLOCKS 5 struct qcom_pcie_resources_2_9_0 { - struct clk_bulk_data clks[5]; + struct clk_bulk_data clks[QCOM_PCIE_2_9_0_MAX_CLOCKS]; struct reset_control *rst; }; @@ -222,11 +237,14 @@ struct qcom_pcie { struct dw_pcie *pci; void __iomem *parf; /* DT parf */ void __iomem *elbi; /* DT elbi */ + void __iomem *mhi; union qcom_pcie_resources res; struct phy *phy; struct gpio_desc *reset; struct icc_path *icc_mem; const struct qcom_pcie_cfg *cfg; + struct dentry *debugfs; + bool suspended; }; #define to_qcom_pcie(x) dev_get_drvdata((x)->dev) @@ -261,9 +279,9 @@ static void qcom_pcie_2_1_0_ltssm_enable(struct qcom_pcie *pcie) u32 val; /* enable link training */ - val = readl(pcie->elbi + PCIE20_ELBI_SYS_CTRL); - val |= PCIE20_ELBI_SYS_CTRL_LT_ENABLE; - writel(val, pcie->elbi + PCIE20_ELBI_SYS_CTRL); + val = readl(pcie->elbi + ELBI_SYS_CTRL); + val |= ELBI_SYS_CTRL_LT_ENABLE; + writel(val, pcie->elbi + ELBI_SYS_CTRL); } static int qcom_pcie_get_resources_2_1_0(struct qcom_pcie *pcie) @@ -271,6 +289,7 @@ static int qcom_pcie_get_resources_2_1_0(struct qcom_pcie *pcie) struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0; struct dw_pcie *pci = pcie->pci; struct device *dev = pci->dev; + bool is_apq = of_device_is_compatible(dev->of_node, "qcom,pcie-apq8064"); int ret; res->supplies[0].supply = "vdda"; @@ -297,28 +316,20 @@ static int qcom_pcie_get_resources_2_1_0(struct qcom_pcie *pcie) if (ret < 0) return ret; - res->pci_reset = devm_reset_control_get_exclusive(dev, "pci"); - if (IS_ERR(res->pci_reset)) - return PTR_ERR(res->pci_reset); - - res->axi_reset = devm_reset_control_get_exclusive(dev, "axi"); - if (IS_ERR(res->axi_reset)) - r |