diff options
Diffstat (limited to 'drivers/tty')
41 files changed, 1477 insertions, 711 deletions
diff --git a/drivers/tty/Kconfig b/drivers/tty/Kconfig index 0840d27381ea..e0a04bfc873e 100644 --- a/drivers/tty/Kconfig +++ b/drivers/tty/Kconfig @@ -441,4 +441,28 @@ config VCC depends on SUN_LDOMS help Support for Sun logical domain consoles. + +config LDISC_AUTOLOAD + bool "Automatically load TTY Line Disciplines" + default y + help + Historically the kernel has always automatically loaded any + line discipline that is in a kernel module when a user asks + for it to be loaded with the TIOCSETD ioctl, or through other + means. This is not always the best thing to do on systems + where you know you will not be using some of the more + "ancient" line disciplines, so prevent the kernel from doing + this unless the request is coming from a process with the + CAP_SYS_MODULE permissions. + + Say 'Y' here if you trust your userspace users to do the right + thing, or if you have only provided the line disciplines that + you know you will be using, or if you wish to continue to use + the traditional method of on-demand loading of these modules + by any user. + + This functionality can be changed at runtime with the + dev.tty.ldisc_autoload sysctl, this configuration option will + only set the default value of this functionality. + endif # TTY diff --git a/drivers/tty/hvc/hvc_xen.c b/drivers/tty/hvc/hvc_xen.c index dc43fa96c3de..5ef08905fe05 100644 --- a/drivers/tty/hvc/hvc_xen.c +++ b/drivers/tty/hvc/hvc_xen.c @@ -492,7 +492,7 @@ static void xencons_backend_changed(struct xenbus_device *dev, case XenbusStateClosed: if (dev->state == XenbusStateClosed) break; - /* Missed the backend's CLOSING state -- fallthrough */ + /* fall through - Missed the backend's CLOSING state. */ case XenbusStateClosing: xenbus_frontend_closed(dev); break; diff --git a/drivers/tty/ipwireless/hardware.c b/drivers/tty/ipwireless/hardware.c index b0baa4ce10f9..6bbf35682d53 100644 --- a/drivers/tty/ipwireless/hardware.c +++ b/drivers/tty/ipwireless/hardware.c @@ -1516,6 +1516,8 @@ static void ipw_send_setup_packet(struct ipw_hardware *hw) sizeof(struct ipw_setup_get_version_query_packet), ADDR_SETUP_PROT, TL_PROTOCOLID_SETUP, TL_SETUP_SIGNO_GET_VERSION_QRY); + if (!ver_packet) + return; ver_packet->header.length = sizeof(struct tl_setup_get_version_qry); /* diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c index 6f7da9a9d76f..c4e16b31f9ab 100644 --- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -143,8 +143,8 @@ struct gsm_dlci { struct sk_buff *skb; /* Frame being sent */ struct sk_buff_head skb_list; /* Queued frames */ /* Data handling callback */ - void (*data)(struct gsm_dlci *dlci, u8 *data, int len); - void (*prev_data)(struct gsm_dlci *dlci, u8 *data, int len); + void (*data)(struct gsm_dlci *dlci, const u8 *data, int len); + void (*prev_data)(struct gsm_dlci *dlci, const u8 *data, int len); struct net_device *net; /* network interface, if created */ }; @@ -988,7 +988,7 @@ static void gsm_dlci_data_kick(struct gsm_dlci *dlci) * Encode up and queue a UI/UIH frame containing our response. */ -static void gsm_control_reply(struct gsm_mux *gsm, int cmd, u8 *data, +static void gsm_control_reply(struct gsm_mux *gsm, int cmd, const u8 *data, int dlen) { struct gsm_msg *msg; @@ -1073,14 +1073,14 @@ static void gsm_process_modem(struct tty_struct *tty, struct gsm_dlci *dlci, * and if need be stuff a break message down the tty. */ -static void gsm_control_modem(struct gsm_mux *gsm, u8 *data, int clen) +static void gsm_control_modem(struct gsm_mux *gsm, const u8 *data, int clen) { unsigned int addr = 0; unsigned int modem = 0; unsigned int brk = 0; struct gsm_dlci *dlci; int len = clen; - u8 *dp = data; + const u8 *dp = data; struct tty_struct *tty; while (gsm_read_ea(&addr, *dp++) == 0) { @@ -1134,13 +1134,13 @@ static void gsm_control_modem(struct gsm_mux *gsm, u8 *data, int clen) * this into the uplink tty if present */ -static void gsm_control_rls(struct gsm_mux *gsm, u8 *data, int clen) +static void gsm_control_rls(struct gsm_mux *gsm, const u8 *data, int clen) { struct tty_port *port; unsigned int addr = 0; u8 bits; int len = clen; - u8 *dp = data; + const u8 *dp = data; while (gsm_read_ea(&addr, *dp++) == 0) { len--; @@ -1189,7 +1189,7 @@ static void gsm_dlci_begin_close(struct gsm_dlci *dlci); */ static void gsm_control_message(struct gsm_mux *gsm, unsigned int command, - u8 *data, int clen) + const u8 *data, int clen) { u8 buf[1]; unsigned long flags; @@ -1261,7 +1261,7 @@ static void gsm_control_message(struct gsm_mux *gsm, unsigned int command, */ static void gsm_control_response(struct gsm_mux *gsm, unsigned int command, - u8 *data, int clen) + const u8 *data, int clen) { struct gsm_control *ctrl; unsigned long flags; @@ -1553,7 +1553,7 @@ static void gsm_dlci_begin_close(struct gsm_dlci *dlci) * open we shovel the bits down it, if not we drop them. */ -static void gsm_dlci_data(struct gsm_dlci *dlci, u8 *data, int clen) +static void gsm_dlci_data(struct gsm_dlci *dlci, const u8 *data, int clen) { /* krefs .. */ struct tty_port *port = &dlci->port; @@ -1565,14 +1565,11 @@ static void gsm_dlci_data(struct gsm_dlci *dlci, u8 *data, int clen) pr_debug("%d bytes for tty\n", len); switch (dlci->adaption) { /* Unsupported types */ - /* Packetised interruptible data */ - case 4: + case 4: /* Packetised interruptible data */ break; - /* Packetised uininterruptible voice/data */ - case 3: + case 3: /* Packetised uininterruptible voice/data */ break; - /* Asynchronous serial with line state in each frame */ - case 2: + case 2: /* Asynchronous serial with line state in each frame */ while (gsm_read_ea(&modem, *data++) == 0) { len--; if (len == 0) @@ -1583,8 +1580,8 @@ static void gsm_dlci_data(struct gsm_dlci *dlci, u8 *data, int clen) gsm_process_modem(tty, dlci, modem, clen); tty_kref_put(tty); } - /* Line state will go via DLCI 0 controls only */ - case 1: + /* Fall through */ + case 1: /* Line state will go via DLCI 0 controls only */ default: tty_insert_flip_string(port, data, len); tty_flip_buffer_push(port); @@ -1603,7 +1600,7 @@ static void gsm_dlci_data(struct gsm_dlci *dlci, u8 *data, int clen) * and we divide up the work accordingly. */ -static void gsm_dlci_command(struct gsm_dlci *dlci, u8 *data, int len) +static void gsm_dlci_command(struct gsm_dlci *dlci, const u8 *data, int len) { /* See what command is involved */ unsigned int command = 0; @@ -1979,7 +1976,7 @@ static void gsm1_receive(struct gsm_mux *gsm, unsigned char c) gsm->address = 0; gsm->state = GSM_ADDRESS; gsm->fcs = INIT_FCS; - /* Drop through */ + /* Fall through */ case GSM_ADDRESS: /* Address continuation */ gsm->fcs = gsm_fcs_add(gsm->fcs, c); if (gsm_read_ea(&gsm->address, c)) @@ -2214,6 +2211,111 @@ static struct gsm_mux *gsm_alloc_mux(void) return gsm; } +static void gsm_copy_config_values(struct gsm_mux *gsm, + struct gsm_config *c) +{ + memset(c, 0, sizeof(*c)); + c->adaption = gsm->adaption; + c->encapsulation = gsm->encoding; + c->initiator = gsm->initiator; + c->t1 = gsm->t1; + c->t2 = gsm->t2; + c->t3 = 0; /* Not supported */ + c->n2 = gsm->n2; + if (gsm->ftype == UIH) + c->i = 1; + else + c->i = 2; + pr_debug("Ftype %d i %d\n", gsm->ftype, c->i); + c->mru = gsm->mru; + c->mtu = gsm->mtu; + c->k = 0; +} + +static int gsm_config(struct gsm_mux *gsm, struct gsm_config *c) +{ + int need_close = 0; + int need_restart = 0; + + /* Stuff we don't support yet - UI or I frame transport, windowing */ + if ((c->adaption != 1 && c->adaption != 2) || c->k) + return -EOPNOTSUPP; + /* Check the MRU/MTU range looks sane */ + if (c->mru > MAX_MRU || c->mtu > MAX_MTU || c->mru < 8 || c->mtu < 8) + return -EINVAL; + if (c->n2 < 3) + return -EINVAL; + if (c->encapsulation > 1) /* Basic, advanced, no I */ + return -EINVAL; + if (c->initiator > 1) + return -EINVAL; + if (c->i == 0 || c->i > 2) /* UIH and UI only */ + return -EINVAL; + /* + * See what is needed for reconfiguration + */ + + /* Timing fields */ + if (c->t1 != 0 && c->t1 != gsm->t1) + need_restart = 1; + if (c->t2 != 0 && c->t2 != gsm->t2) + need_restart = 1; + if (c->encapsulation != gsm->encoding) + need_restart = 1; + if (c->adaption != gsm->adaption) + need_restart = 1; + /* Requires care */ + if (c->initiator != gsm->initiator) + need_close = 1; + if (c->mru != gsm->mru) + need_restart = 1; + if (c->mtu != gsm->mtu) + need_restart = 1; + + /* + * Close down what is needed, restart and initiate the new + * configuration + */ + + if (need_close || need_restart) { + int ret; + + ret = gsm_disconnect(gsm); + + if (ret) + return ret; + } + if (need_restart) + gsm_cleanup_mux(gsm); + + gsm->initiator = c->initiator; + gsm->mru = c->mru; + gsm->mtu = c->mtu; + gsm->encoding = c->encapsulation; + gsm->adaption = c->adaption; + gsm->n2 = c->n2; + + if (c->i == 1) + gsm->ftype = UIH; + else if (c->i == 2) + gsm->ftype = UI; + + if (c->t1) + gsm->t1 = c->t1; + if (c->t2) + gsm->t2 = c->t2; + + /* + * FIXME: We need to separate activation/deactivation from adding + * and removing from the mux array + */ + if (need_restart) + gsm_activate_mux(gsm); + if (gsm->initiator && need_close) + gsm_dlci_begin_open(gsm->dlci[0]); + return 0; +} + /** * gsmld_output - write to link * @gsm: our mux @@ -2495,89 +2597,6 @@ static __poll_t gsmld_poll(struct tty_struct *tty, struct file *file, return mask; } -static int gsmld_config(struct tty_struct *tty, struct gsm_mux *gsm, - struct gsm_config *c) -{ - int need_close = 0; - int need_restart = 0; - - /* Stuff we don't support yet - UI or I frame transport, windowing */ - if ((c->adaption != 1 && c->adaption != 2) || c->k) - return -EOPNOTSUPP; - /* Check the MRU/MTU range looks sane */ - if (c->mru > MAX_MRU || c->mtu > MAX_MTU || c->mru < 8 || c->mtu < 8) - return -EINVAL; - if (c->n2 < 3) - return -EINVAL; - if (c->encapsulation > 1) /* Basic, advanced, no I */ - return -EINVAL; - if (c->initiator > 1) - return -EINVAL; - if (c->i == 0 || c->i > 2) /* UIH and UI only */ - return -EINVAL; - /* - * See what is needed for reconfiguration - */ - - /* Timing fields */ - if (c->t1 != 0 && c->t1 != gsm->t1) - need_restart = 1; - if (c->t2 != 0 && c->t2 != gsm->t2) - need_restart = 1; - if (c->encapsulation != gsm->encoding) - need_restart = 1; - if (c->adaption != gsm->adaption) - need_restart = 1; - /* Requires care */ - if (c->initiator != gsm->initiator) - need_close = 1; - if (c->mru != gsm->mru) - need_restart = 1; - if (c->mtu != gsm->mtu) - need_restart = 1; - - /* - * Close down what is needed, restart and initiate the new - * configuration - */ - - if (need_close || need_restart) { - int ret; - - ret = gsm_disconnect(gsm); - - if (ret) - return ret; - } - if (need_restart) - gsm_cleanup_mux(gsm); - - gsm->initiator = c->initiator; - gsm->mru = c->mru; - gsm->mtu = c->mtu; - gsm->encoding = c->encapsulation; - gsm->adaption = c->adaption; - gsm->n2 = c->n2; - - if (c->i == 1) - gsm->ftype = UIH; - else if (c->i == 2) - gsm->ftype = UI; - - if (c->t1) - gsm->t1 = c->t1; - if (c->t2) - gsm->t2 = c->t2; - - /* FIXME: We need to separate activation/deactivation from adding - and removing from the mux array */ - if (need_restart) - gsm_activate_mux(gsm); - if (gsm->initiator && need_close) - gsm_dlci_begin_open(gsm->dlci[0]); - return 0; -} - static int gsmld_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg) { @@ -2586,29 +2605,14 @@ static int gsmld_ioctl(struct tty_struct *tty, struct file *file, switch (cmd) { case GSMIOC_GETCONF: - memset(&c, 0, sizeof(c)); - c.adaption = gsm->adaption; - c.encapsulation = gsm->encoding; - c.initiator = gsm->initiator; - c.t1 = gsm->t1; - c.t2 = gsm->t2; - c.t3 = 0; /* Not supported */ - c.n2 = gsm->n2; - if (gsm->ftype == UIH) - c.i = 1; - else - c.i = 2; - pr_debug("Ftype %d i %d\n", gsm->ftype, c.i); - c.mru = gsm->mru; - c.mtu = gsm->mtu; - c.k = 0; + gsm_copy_config_values(gsm, &c); if (copy_to_user((void *)arg, &c, sizeof(c))) return -EFAULT; return 0; case GSMIOC_SETCONF: if (copy_from_user(&c, (void *)arg, sizeof(c))) return -EFAULT; - return gsmld_config(tty, gsm, &c); + return gsm_config(gsm, &c); default: return n_tty_ioctl_helper(tty, file, cmd, arg); } @@ -2695,7 +2699,7 @@ static void gsm_mux_net_tx_timeout(struct net_device *net) } static void gsm_mux_rx_netchar(struct gsm_dlci *dlci, - unsigned char *in_buf, int size) + const unsigned char *in_buf, int size) { struct net_device *net = dlci->net; struct sk_buff *skb; diff --git a/drivers/tty/n_hdlc.c b/drivers/tty/n_hdlc.c index 4164414d4c64..e55c79eb6430 100644 --- a/drivers/tty/n_hdlc.c +++ b/drivers/tty/n_hdlc.c @@ -597,6 +597,7 @@ static ssize_t n_hdlc_tty_read(struct tty_struct *tty, struct file *file, /* too large for caller's buffer */ ret = -EOVERFLOW; } else { + __set_current_state(TASK_RUNNING); if (copy_to_user(buf, rbuf->buf, rbuf->count)) ret = -EFAULT; else @@ -776,7 +777,7 @@ static int n_hdlc_tty_ioctl(struct tty_struct *tty, struct file *file, case TCOFLUSH: flush_tx_queue(tty); } - /* fall through to default */ + /* fall through - to default */ default: error = n_tty_ioctl_helper(tty, file, cmd, arg); diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index 5dc9686697cf..9cdb0fa3c4bf 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -50,8 +50,10 @@ #include <linux/ratelimit.h> #include <linux/vmalloc.h> - -/* number of characters left in xmit buffer before select has we have room */ +/* + * Until this number of characters is queued in the xmit buffer, select will + * return "we have room for writes". + */ #define WAKEUP_CHARS 256 /* diff --git a/drivers/tty/nozomi.c b/drivers/tty/nozomi.c index fed820e9ab9d..3214e22e79f3 100644 --- a/drivers/tty/nozomi.c +++ b/drivers/tty/nozomi.c @@ -1317,7 +1317,6 @@ static void remove_sysfs_files(struct nozomi *dc) static int nozomi_card_init(struct pci_dev *pdev, const struct pci_device_id *ent) { - resource_size_t start; int ret; struct nozomi *dc = NULL; int ndev_idx; @@ -1357,17 +1356,10 @@ static int nozomi_card_init(struct pci_dev *pdev, goto err_disable_device; } - start = pci_resource_start(dc->pdev, 0); - if (start == 0) { - dev_err(&pdev->dev, "No I/O address for card detected\n"); - ret = -ENODEV; - goto err_rel_regs; - } - /* Find out what card type it is */ nozomi_get_card_type(dc); - dc->base_addr = ioremap_nocache(start, dc->card_type); + dc->base_addr = pci_iomap(dc->pdev, 0, dc->card_type); if (!dc->base_addr) { dev_err(&pdev->dev, "Unable to map card MMIO\n"); ret = -ENODEV; diff --git a/drivers/tty/serdev/serdev-ttyport.c b/drivers/tty/serdev/serdev-ttyport.c index fa1672993b4c..d1cdd2ab8b4c 100644 --- a/drivers/tty/serdev/serdev-ttyport.c +++ b/drivers/tty/serdev/serdev-ttyport.c @@ -233,7 +233,7 @@ static int ttyport_get_tiocm(struct serdev_controller *ctrl) if (!tty->ops->tiocmget) return -ENOTSUPP; - return tty->driver->ops->tiocmget(tty); + return tty->ops->tiocmget(tty); } static int ttyport_set_tiocm(struct serdev_controller *ctrl, unsigned int set, unsigned int clear) @@ -244,7 +244,7 @@ static int ttyport_set_tiocm(struct serdev_controller *ctrl, unsigned int set, u if (!tty->ops->tiocmset) return -ENOTSUPP; - return tty->driver->ops->tiocmset(tty, set, clear); + return tty->ops->tiocmset(tty, set, clear); } static const struct serdev_controller_ops ctrl_ops = { diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c index 189ab1212d9a..e441221e04b9 100644 --- a/drivers/tty/serial/8250/8250_core.c +++ b/drivers/tty/serial/8250/8250_core.c @@ -1070,15 +1070,16 @@ int serial8250_register_8250_port(struct uart_8250_port *up) ret = 0; } - } - /* Initialise interrupt backoff work if required */ - if (up->overrun_backoff_time_ms > 0) { - uart->overrun_backoff_time_ms = up->overrun_backoff_time_ms; - INIT_DELAYED_WORK(&uart->overrun_backoff, - serial_8250_overrun_backoff_work); - } else { - uart->overrun_backoff_time_ms = 0; + /* Initialise interrupt backoff work if required */ + if (up->overrun_backoff_time_ms > 0) { + uart->overrun_backoff_time_ms = + up->overrun_backoff_time_ms; + INIT_DELAYED_WORK(&uart->overrun_backoff, + serial_8250_overrun_backoff_work); + } else { + uart->overrun_backoff_time_ms = 0; + } } mutex_unlock(&serial_mutex); diff --git a/drivers/tty/serial/8250/8250_ingenic.c b/drivers/tty/serial/8250/8250_ingenic.c index 15a8c8dfa92b..424c07c5f629 100644 --- a/drivers/tty/serial/8250/8250_ingenic.c +++ b/drivers/tty/serial/8250/8250_ingenic.c @@ -129,22 +129,21 @@ static int __init ingenic_early_console_setup(struct earlycon_device *dev, return 0; } -EARLYCON_DECLARE(jz4740_uart, ingenic_early_console_setup); OF_EARLYCON_DECLARE(jz4740_uart, "ingenic,jz4740-uart", ingenic_early_console_setup); -EARLYCON_DECLARE(jz4770_uart, ingenic_early_console_setup); OF_EARLYCON_DECLARE(jz4770_uart, "ingenic,jz4770-uart", ingenic_early_console_setup); -EARLYCON_DECLARE(jz4775_uart, ingenic_early_console_setup); OF_EARLYCON_DECLARE(jz4775_uart, "ingenic,jz4775-uart", ingenic_early_console_setup); -EARLYCON_DECLARE(jz4780_uart, ingenic_early_console_setup); OF_EARLYCON_DECLARE(jz4780_uart, "ingenic,jz4780-uart", ingenic_early_console_setup); +OF_EARLYCON_DECLARE(x1000_uart, "ingenic,x1000-uart", + ingenic_early_console_setup); + static void ingenic_uart_serial_out(struct uart_port *p, int offset, int value) { int ier; @@ -328,12 +327,18 @@ static const struct ingenic_uart_config jz4780_uart_config = { .fifosize = 64, }; +static const struct ingenic_uart_config x1000_uart_config = { + .tx_loadsz = 32, + .fifosize = 64, +}; + static const struct of_device_id of_match[] = { { .compatible = "ingenic,jz4740-uart", .data = &jz4740_uart_config }, { .compatible = "ingenic,jz4760-uart", .data = &jz4760_uart_config }, { .compatible = "ingenic,jz4770-uart", .data = &jz4760_uart_config }, { .compatible = "ingenic,jz4775-uart", .data = &jz4760_uart_config }, { .compatible = "ingenic,jz4780-uart", .data = &jz4780_uart_config }, + { .compatible = "ingenic,x1000-uart", .data = &x1000_uart_config }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, of_match); diff --git a/drivers/tty/serial/8250/8250_mtk.c b/drivers/tty/serial/8250/8250_mtk.c index e2c407656fa6..c1fdbc0b6840 100644 --- a/drivers/tty/serial/8250/8250_mtk.c +++ b/drivers/tty/serial/8250/8250_mtk.c @@ -357,6 +357,9 @@ static int mtk8250_probe_of(struct platform_device *pdev, struct uart_port *p, if (dmacnt == 2) { data->dma = devm_kzalloc(&pdev->dev, sizeof(*data->dma), GFP_KERNEL); + if (!data->dma) + return -ENOMEM; + data->dma->fn = mtk8250_dma_filter; data->dma->rx_size = MTK_UART_RX_SIZE; data->dma->rxconf.src_maxburst = MTK_UART_RX_TRIGGER; diff --git a/drivers/tty/serial/8250/8250_of.c b/drivers/tty/serial/8250/8250_of.c index a1a85805d010..0277479c87e9 100644 --- a/drivers/tty/serial/8250/8250_of.c +++ b/drivers/tty/serial/8250/8250_of.c @@ -130,6 +130,10 @@ static int of_platform_serial_setup(struct platform_device *ofdev, port->flags |= UPF_IOREMAP; } + /* Compatibility with the deprecated pxa driver and 8250_pxa drivers. */ + if (of_device_is_compatible(np, "mrvl,mmp-uart")) + port->regshift = 2; + /* Check for registers offset within the devices address range */ if (of_property_read_u32(np, "reg-shift", &prop) == 0) port->regshift = prop; @@ -327,6 +331,7 @@ static const struct of_device_id of_platform_serial_table[] = { { .compatible = "nvidia,tegra20-uart", .data = (void *)PORT_TEGRA, }, { .compatible = "nxp,lpc3220-uart", .data = (void *)PORT_LPC3220, }, { .compatible = "ralink,rt2880-uart", .data = (void *)PORT_RT2880, }, + { .compatible = "intel,xscale-uart", .data = (void *)PORT_XSCALE, }, { .compatible = "altr,16550-FIFO32", .data = (void *)PORT_ALTR_16550_F32, }, { .compatible = "altr,16550-FIFO64", diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c index ad7ba7d0f28d..0a8316632d75 100644 --- a/drivers/tty/serial/8250/8250_omap.c +++ b/drivers/tty/serial/8250/8250_omap.c @@ -12,6 +12,7 @@ #define SUPPORT_SYSRQ #endif +#include <linux/clk.h> #include <linux/device.h> #include <linux/io.h> #include <linux/module.h> @@ -1134,10 +1135,12 @@ static int omap8250_probe(struct platform_device *pdev) { struct resource *regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); struct resource *irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + struct device_node *np = pdev->dev.of_node; struct omap8250_priv *priv; struct uart_8250_port up; int ret; void __iomem *membase; + const struct of_device_id *id; if (!regs || !irq) { dev_err(&pdev->dev, "missing registers or irq\n"); @@ -1194,27 +1197,31 @@ static int omap8250_probe(struct platform_device *pdev) up.port.unthrottle = omap_8250_unthrottle; up.port.rs485_config = omap_8250_rs485_config; - if (pdev->dev.of_node) { - const struct of_device_id *id; - - ret = of_alias_get_id(pdev->dev.of_node, "serial"); - - of_property_read_u32(pdev->dev.of_node, "clock-frequency", - &up.port.uartclk); - priv->wakeirq = irq_of_parse_and_map(pdev->dev.of_node, 1); - - id = of_match_device(of_match_ptr(omap8250_dt_ids), &pdev->dev); - if (id && id->data) - priv->habit |= *(u8 *)id->data; - } else { - ret = pdev->id; - } + ret = of_alias_get_id(np, "serial"); if (ret < 0) { - dev_err(&pdev->dev, "failed to get alias/pdev i |