diff options
Diffstat (limited to 'include/drm')
36 files changed, 739 insertions, 308 deletions
diff --git a/include/drm/amd_asic_type.h b/include/drm/amd_asic_type.h index 8712e14991ed..cde3c8c9f20c 100644 --- a/include/drm/amd_asic_type.h +++ b/include/drm/amd_asic_type.h @@ -56,6 +56,8 @@ enum amd_asic_type { CHIP_NAVI12, /* 27 */ CHIP_SIENNA_CICHLID, /* 28 */ CHIP_NAVY_FLOUNDER, /* 29 */ + CHIP_VANGOGH, /* 30 */ + CHIP_DIMGREY_CAVEFISH, /* 31 */ CHIP_LAST, }; diff --git a/include/drm/drm_atomic.h b/include/drm/drm_atomic.h index d07c851d255b..ce7023e9115d 100644 --- a/include/drm/drm_atomic.h +++ b/include/drm/drm_atomic.h @@ -248,6 +248,26 @@ struct drm_private_state_funcs { * drm_dev_register() * 2/ all calls to drm_atomic_private_obj_fini() must be done after calling * drm_dev_unregister() + * + * If that private object is used to store a state shared by multiple + * CRTCs, proper care must be taken to ensure that non-blocking commits are + * properly ordered to avoid a use-after-free issue. + * + * Indeed, assuming a sequence of two non-blocking &drm_atomic_commit on two + * different &drm_crtc using different &drm_plane and &drm_connector, so with no + * resources shared, there's no guarantee on which commit is going to happen + * first. However, the second &drm_atomic_commit will consider the first + * &drm_private_obj its old state, and will be in charge of freeing it whenever + * the second &drm_atomic_commit is done. + * + * If the first &drm_atomic_commit happens after it, it will consider its + * &drm_private_obj the new state and will be likely to access it, resulting in + * an access to a freed memory region. Drivers should store (and get a reference + * to) the &drm_crtc_commit structure in our private state in + * &drm_mode_config_helper_funcs.atomic_commit_setup, and then wait for that + * commit to complete as the first step of + * &drm_mode_config_helper_funcs.atomic_commit_tail, similar to + * drm_atomic_helper_wait_for_dependencies(). */ struct drm_private_obj { /** @@ -308,7 +328,6 @@ struct __drm_private_objs_state { * struct drm_atomic_state - the global state object for atomic updates * @ref: count of all references to this state (will not be freed until zero) * @dev: parent DRM device - * @legacy_cursor_update: hint to enforce legacy cursor IOCTL semantics * @async_update: hint for asynchronous plane update * @planes: pointer to array of structures with per-plane data * @crtcs: pointer to array of CRTC pointers @@ -336,6 +355,17 @@ struct drm_atomic_state { * drm_atomic_crtc_needs_modeset(). */ bool allow_modeset : 1; + /** + * @legacy_cursor_update: + * + * Hint to enforce legacy cursor IOCTL semantics. + * + * WARNING: This is thoroughly broken and pretty much impossible to + * implement correctly. Drivers must ignore this and should instead + * implement &drm_plane_helper_funcs.atomic_async_check and + * &drm_plane_helper_funcs.atomic_async_commit hooks. New users of this + * flag are not allowed. + */ bool legacy_cursor_update : 1; bool async_update : 1; /** @@ -773,7 +803,8 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p); (void)(crtc) /* Only to avoid unused-but-set-variable warning */, \ (old_crtc_state) = (__state)->crtcs[__i].old_state, \ (void)(old_crtc_state) /* Only to avoid unused-but-set-variable warning */, \ - (new_crtc_state) = (__state)->crtcs[__i].new_state, 1)) + (new_crtc_state) = (__state)->crtcs[__i].new_state, \ + (void)(new_crtc_state) /* Only to avoid unused-but-set-variable warning */, 1)) /** * for_each_old_crtc_in_state - iterate over all CRTCs in an atomic update @@ -792,6 +823,7 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p); (__i)++) \ for_each_if ((__state)->crtcs[__i].ptr && \ ((crtc) = (__state)->crtcs[__i].ptr, \ + (void)(crtc) /* Only to avoid unused-but-set-variable warning */, \ (old_crtc_state) = (__state)->crtcs[__i].old_state, 1)) /** diff --git a/include/drm/drm_atomic_helper.h b/include/drm/drm_atomic_helper.h index 85df04c8e62f..4045e2507e11 100644 --- a/include/drm/drm_atomic_helper.h +++ b/include/drm/drm_atomic_helper.h @@ -147,10 +147,6 @@ int drm_atomic_helper_page_flip_target( uint32_t flags, uint32_t target, struct drm_modeset_acquire_ctx *ctx); -int drm_atomic_helper_legacy_gamma_set(struct drm_crtc *crtc, - u16 *red, u16 *green, u16 *blue, - uint32_t size, - struct drm_modeset_acquire_ctx *ctx); /** * drm_atomic_crtc_for_each_plane - iterate over planes currently attached to CRTC @@ -167,7 +163,7 @@ int drm_atomic_helper_legacy_gamma_set(struct drm_crtc *crtc, drm_for_each_plane_mask(plane, (crtc)->dev, (crtc)->state->plane_mask) /** - * drm_crtc_atomic_state_for_each_plane - iterate over attached planes in new state + * drm_atomic_crtc_state_for_each_plane - iterate over attached planes in new state * @plane: the loop cursor * @crtc_state: the incoming CRTC state * @@ -180,7 +176,7 @@ int drm_atomic_helper_legacy_gamma_set(struct drm_crtc *crtc, drm_for_each_plane_mask(plane, (crtc_state)->state->dev, (crtc_state)->plane_mask) /** - * drm_crtc_atomic_state_for_each_plane_state - iterate over attached planes in new state + * drm_atomic_crtc_state_for_each_plane_state - iterate over attached planes in new state * @plane: the loop cursor * @plane_state: loop cursor for the plane's state, must be const * @crtc_state: the incoming CRTC state diff --git a/include/drm/drm_client.h b/include/drm/drm_client.h index 7aaea665bfc2..f07f2fb02e75 100644 --- a/include/drm/drm_client.h +++ b/include/drm/drm_client.h @@ -3,6 +3,7 @@ #ifndef _DRM_CLIENT_H_ #define _DRM_CLIENT_H_ +#include <linux/dma-buf-map.h> #include <linux/lockdep.h> #include <linux/mutex.h> #include <linux/types.h> @@ -141,9 +142,9 @@ struct drm_client_buffer { struct drm_gem_object *gem; /** - * @vaddr: Virtual address for the buffer + * @map: Virtual address for the buffer */ - void *vaddr; + struct dma_buf_map map; /** * @fb: DRM framebuffer @@ -155,7 +156,7 @@ struct drm_client_buffer * drm_client_framebuffer_create(struct drm_client_dev *client, u32 width, u32 height, u32 format); void drm_client_framebuffer_delete(struct drm_client_buffer *buffer); int drm_client_framebuffer_flush(struct drm_client_buffer *buffer, struct drm_rect *rect); -void *drm_client_buffer_vmap(struct drm_client_buffer *buffer); +int drm_client_buffer_vmap(struct drm_client_buffer *buffer, struct dma_buf_map *map); void drm_client_buffer_vunmap(struct drm_client_buffer *buffer); int drm_client_modeset_create(struct drm_client_dev *client); diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h index 928136556174..1922b278ffad 100644 --- a/include/drm/drm_connector.h +++ b/include/drm/drm_connector.h @@ -84,7 +84,7 @@ enum drm_connector_status { }; /** - * enum drm_connector_registration_status - userspace registration status for + * enum drm_connector_registration_state - userspace registration status for * a &drm_connector * * This enum is used to track the status of initializing a connector and @@ -175,6 +175,46 @@ struct drm_scdc { struct drm_scrambling scrambling; }; +/** + * struct drm_hdmi_dsc_cap - DSC capabilities of HDMI sink + * + * Describes the DSC support provided by HDMI 2.1 sink. + * The information is fetched fom additional HFVSDB blocks defined + * for HDMI 2.1. + */ +struct drm_hdmi_dsc_cap { + /** @v_1p2: flag for dsc1.2 version support by sink */ + bool v_1p2; + + /** @native_420: Does sink support DSC with 4:2:0 compression */ + bool native_420; + + /** + * @all_bpp: Does sink support all bpp with 4:4:4: or 4:2:2 + * compressed formats + */ + bool all_bpp; + + /** + * @bpc_supported: compressed bpc supported by sink : 10, 12 or 16 bpc + */ + u8 bpc_supported; + + /** @max_slices: maximum number of Horizontal slices supported by */ + u8 max_slices; + + /** @clk_per_slice : max pixel clock in MHz supported per slice */ + int clk_per_slice; + + /** @max_lanes : dsc max lanes supported for Fixed rate Link training */ + u8 max_lanes; + + /** @max_frl_rate_per_lane : maximum frl rate with DSC per lane */ + u8 max_frl_rate_per_lane; + + /** @total_chunk_kbytes: max size of chunks in KBs supported per line*/ + u8 total_chunk_kbytes; +}; /** * struct drm_hdmi_info - runtime information about the connected HDMI sink @@ -207,6 +247,15 @@ struct drm_hdmi_info { /** @y420_dc_modes: bitmap of deep color support index */ u8 y420_dc_modes; + + /** @max_frl_rate_per_lane: support fixed rate link */ + u8 max_frl_rate_per_lane; + + /** @max_lanes: supported by sink */ + u8 max_lanes; + + /** @dsc_cap: DSC capabilities of the sink */ + struct drm_hdmi_dsc_cap dsc_cap; }; /** diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h index ba839e5e357d..540e2e43ec93 100644 --- a/include/drm/drm_crtc.h +++ b/include/drm/drm_crtc.h @@ -1223,6 +1223,39 @@ int drm_crtc_init_with_planes(struct drm_device *dev, const char *name, ...); void drm_crtc_cleanup(struct drm_crtc *crtc); +__printf(7, 8) +void *__drmm_crtc_alloc_with_planes(struct drm_device *dev, + size_t size, size_t offset, + struct drm_plane *primary, + struct drm_plane *cursor, + const struct drm_crtc_funcs *funcs, + const char *name, ...); + +/** + * drm_crtc_alloc_with_planes - Allocate and initialize a new CRTC object with + * specified primary and cursor planes. + * @dev: DRM device + * @type: the type of the struct which contains struct &drm_crtc + * @member: the name of the &drm_crtc within @type. + * @primary: Primary plane for CRTC + * @cursor: Cursor plane for CRTC + * @funcs: callbacks for the new CRTC + * @name: printf style format string for the CRTC name, or NULL for default name + * + * Allocates and initializes a new crtc object. Cleanup is automatically + * handled through registering drmm_crtc_cleanup() with drmm_add_action(). + * + * The @drm_crtc_funcs.destroy hook must be NULL. + * + * Returns: + * Pointer to new crtc, or ERR_PTR on failure. + */ +#define drmm_crtc_alloc_with_planes(dev, type, member, primary, cursor, funcs, name, ...) \ + ((type *)__drmm_crtc_alloc_with_planes(dev, sizeof(type), \ + offsetof(type, member), \ + primary, cursor, funcs, \ + name, ##__VA_ARGS__)) + /** * drm_crtc_index - find the index of a registered CRTC * @crtc: CRTC to find index for @@ -1279,6 +1312,16 @@ static inline struct drm_crtc *drm_crtc_find(struct drm_device *dev, #define drm_for_each_crtc(crtc, dev) \ list_for_each_entry(crtc, &(dev)->mode_config.crtc_list, head) +/** + * drm_for_each_crtc_reverse - iterate over all CRTCs in reverse order + * @crtc: a &struct drm_crtc as the loop cursor + * @dev: the &struct drm_device + * + * Iterate over all CRTCs of @dev. + */ +#define drm_for_each_crtc_reverse(crtc, dev) \ + list_for_each_entry_reverse(crtc, &(dev)->mode_config.crtc_list, head) + int drm_crtc_create_scaling_filter_property(struct drm_crtc *crtc, unsigned int supported_filters); diff --git a/include/drm/drm_device.h b/include/drm/drm_device.h index f4f68e7a9149..939904ae88fc 100644 --- a/include/drm/drm_device.h +++ b/include/drm/drm_device.h @@ -27,7 +27,7 @@ struct pci_controller; /** - * enum drm_switch_power - power state of drm device + * enum switch_power_state - power state of drm device */ enum switch_power_state { @@ -51,13 +51,6 @@ enum switch_power_state { * may contain multiple heads. */ struct drm_device { - /** - * @legacy_dev_list: - * - * List of devices per driver for stealth attach cleanup - */ - struct list_head legacy_dev_list; - /** @if_version: Highest interface version set */ int if_version; @@ -83,7 +76,7 @@ struct drm_device { } managed; /** @driver: DRM driver managing the device */ - struct drm_driver *driver; + const struct drm_driver *driver; /** * @dev_private: @@ -332,6 +325,9 @@ struct drm_device { /* Everything below here is for legacy driver, never use! */ /* private: */ #if IS_ENABLED(CONFIG_DRM_LEGACY) + /* List of devices per driver for stealth attach cleanup */ + struct list_head legacy_dev_list; + /* Context handle management - linked list of context handles */ struct list_head ctxlist; diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h index 6b40258927bf..6236f212da61 100644 --- a/include/drm/drm_dp_helper.h +++ b/include/drm/drm_dp_helper.h @@ -411,6 +411,17 @@ struct drm_device; # define DP_DS_10BPC 1 # define DP_DS_12BPC 2 # define DP_DS_16BPC 3 +/* HDMI2.1 PCON FRL CONFIGURATION */ +# define DP_PCON_MAX_FRL_BW (7 << 2) +# define DP_PCON_MAX_0GBPS (0 << 2) +# define DP_PCON_MAX_9GBPS (1 << 2) +# define DP_PCON_MAX_18GBPS (2 << 2) +# define DP_PCON_MAX_24GBPS (3 << 2) +# define DP_PCON_MAX_32GBPS (4 << 2) +# define DP_PCON_MAX_40GBPS (5 << 2) +# define DP_PCON_MAX_48GBPS (6 << 2) +# define DP_PCON_SOURCE_CTL_MODE (1 << 5) + /* offset 3 for DVI */ # define DP_DS_DVI_DUAL_LINK (1 << 1) # define DP_DS_DVI_HIGH_COLOR_DEPTH (1 << 2) @@ -421,6 +432,17 @@ struct drm_device; # define DP_DS_HDMI_YCBCR444_TO_422_CONV (1 << 3) # define DP_DS_HDMI_YCBCR444_TO_420_CONV (1 << 4) +/* + * VESA DP-to-HDMI PCON Specification adds caps for colorspace + * conversion in DFP cap DPCD 83h. Sec6.1 Table-3. + * Based on the available support the source can enable + * color conversion by writing into PROTOCOL_COVERTER_CONTROL_2 + * DPCD 3052h. + */ +# define DP_DS_HDMI_BT601_RGB_YCBCR_CONV (1 << 5) +# define DP_DS_HDMI_BT709_RGB_YCBCR_CONV (1 << 6) +# define DP_DS_HDMI_BT2020_RGB_YCBCR_CONV (1 << 7) + #define DP_MAX_DOWNSTREAM_PORTS 0x10 /* DP Forward error Correction Registers */ @@ -430,6 +452,84 @@ struct drm_device; # define DP_FEC_CORR_BLK_ERROR_COUNT_CAP (1 << 2) # define DP_FEC_BIT_ERROR_COUNT_CAP (1 << 3) +/* DP-HDMI2.1 PCON DSC ENCODER SUPPORT */ +#define DP_PCON_DSC_ENCODER_CAP_SIZE 0xC /* 0x9E - 0x92 */ +#define DP_PCON_DSC_ENCODER 0x092 +# define DP_PCON_DSC_ENCODER_SUPPORTED (1 << 0) +# define DP_PCON_DSC_PPS_ENC_OVERRIDE (1 << 1) + +/* DP-HDMI2.1 PCON DSC Version */ +#define DP_PCON_DSC_VERSION 0x093 +# define DP_PCON_DSC_MAJOR_MASK (0xF << 0) +# define DP_PCON_DSC_MINOR_MASK (0xF << 4) +# define DP_PCON_DSC_MAJOR_SHIFT 0 +# define DP_PCON_DSC_MINOR_SHIFT 4 + +/* DP-HDMI2.1 PCON DSC RC Buffer block size */ +#define DP_PCON_DSC_RC_BUF_BLK_INFO 0x094 +# define DP_PCON_DSC_RC_BUF_BLK_SIZE (0x3 << 0) +# define DP_PCON_DSC_RC_BUF_BLK_1KB 0 +# define DP_PCON_DSC_RC_BUF_BLK_4KB 1 +# define DP_PCON_DSC_RC_BUF_BLK_16KB 2 +# define DP_PCON_DSC_RC_BUF_BLK_64KB 3 + +/* DP-HDMI2.1 PCON DSC RC Buffer size */ +#define DP_PCON_DSC_RC_BUF_SIZE 0x095 + +/* DP-HDMI2.1 PCON DSC Slice capabilities-1 */ +#define DP_PCON_DSC_SLICE_CAP_1 0x096 +# define DP_PCON_DSC_1_PER_DSC_ENC (0x1 << 0) +# define DP_PCON_DSC_2_PER_DSC_ENC (0x1 << 1) +# define DP_PCON_DSC_4_PER_DSC_ENC (0x1 << 3) +# define DP_PCON_DSC_6_PER_DSC_ENC (0x1 << 4) +# define DP_PCON_DSC_8_PER_DSC_ENC (0x1 << 5) +# define DP_PCON_DSC_10_PER_DSC_ENC (0x1 << 6) +# define DP_PCON_DSC_12_PER_DSC_ENC (0x1 << 7) + +#define DP_PCON_DSC_BUF_BIT_DEPTH 0x097 +# define DP_PCON_DSC_BIT_DEPTH_MASK (0xF << 0) +# define DP_PCON_DSC_DEPTH_9_BITS 0 +# define DP_PCON_DSC_DEPTH_10_BITS 1 +# define DP_PCON_DSC_DEPTH_11_BITS 2 +# define DP_PCON_DSC_DEPTH_12_BITS 3 +# define DP_PCON_DSC_DEPTH_13_BITS 4 +# define DP_PCON_DSC_DEPTH_14_BITS 5 +# define DP_PCON_DSC_DEPTH_15_BITS 6 +# define DP_PCON_DSC_DEPTH_16_BITS 7 +# define DP_PCON_DSC_DEPTH_8_BITS 8 + +#define DP_PCON_DSC_BLOCK_PREDICTION 0x098 +# define DP_PCON_DSC_BLOCK_PRED_SUPPORT (0x1 << 0) + +#define DP_PCON_DSC_ENC_COLOR_FMT_CAP 0x099 +# define DP_PCON_DSC_ENC_RGB (0x1 << 0) +# define DP_PCON_DSC_ENC_YUV444 (0x1 << 1) +# define DP_PCON_DSC_ENC_YUV422_S (0x1 << 2) +# define DP_PCON_DSC_ENC_YUV422_N (0x1 << 3) +# define DP_PCON_DSC_ENC_YUV420_N (0x1 << 4) + +#define DP_PCON_DSC_ENC_COLOR_DEPTH_CAP 0x09A +# define DP_PCON_DSC_ENC_8BPC (0x1 << 1) +# define DP_PCON_DSC_ENC_10BPC (0x1 << 2) +# define DP_PCON_DSC_ENC_12BPC (0x1 << 3) + +#define DP_PCON_DSC_MAX_SLICE_WIDTH 0x09B + +/* DP-HDMI2.1 PCON DSC Slice capabilities-2 */ +#define DP_PCON_DSC_SLICE_CAP_2 0x09C +# define DP_PCON_DSC_16_PER_DSC_ENC (0x1 << 0) +# define DP_PCON_DSC_20_PER_DSC_ENC (0x1 << 1) +# define DP_PCON_DSC_24_PER_DSC_ENC (0x1 << 2) + +/* DP-HDMI2.1 PCON HDMI TX Encoder Bits/pixel increment */ +#define DP_PCON_DSC_BPP_INCR 0x09E +# define DP_PCON_DSC_BPP_INCR_MASK (0x7 << 0) +# define DP_PCON_DSC_ONE_16TH_BPP 0 +# define DP_PCON_DSC_ONE_8TH_BPP 1 +# define DP_PCON_DSC_ONE_4TH_BPP 2 +# define DP_PCON_DSC_ONE_HALF_BPP 3 +# define DP_PCON_DSC_ONE_BPP 4 + /* DP Extended DSC Capabilities */ #define DP_DSC_BRANCH_OVERALL_THROUGHPUT_0 0x0a0 /* DP 1.4a SCR */ #define DP_DSC_BRANCH_OVERALL_THROUGHPUT_1 0x0a1 @@ -935,6 +1035,11 @@ struct drm_device; # define DP_CEC_IRQ (1 << 2) #define DP_LINK_SERVICE_IRQ_VECTOR_ESI0 0x2005 /* 1.2 */ +# define RX_CAP_CHANGED (1 << 0) +# define LINK_STATUS_CHANGED (1 << 1) +# define STREAM_STATUS_CHANGED (1 << 2) +# define HDMI_LINK_STATUS_CHANGED (1 << 3) +# define CONNECTED_OFF_ENTRY_REQUESTED (1 << 4) #define DP_PSR_ERROR_STATUS 0x2006 /* XXX 1.2? */ # define DP_PSR_LINK_CRC_ERROR (1 << 0) @@ -1054,6 +1159,51 @@ struct drm_device; #define DP_CEC_TX_MESSAGE_BUFFER 0x3020 #define DP_CEC_MESSAGE_BUFFER_LENGTH 0x10 +/* PCON CONFIGURE-1 FRL FOR HDMI SINK */ +#define DP_PCON_HDMI_LINK_CONFIG_1 0x305A +# define DP_PCON_ENABLE_MAX_FRL_BW (7 << 0) +# define DP_PCON_ENABLE_MAX_BW_0GBPS 0 +# define DP_PCON_ENABLE_MAX_BW_9GBPS 1 +# define DP_PCON_ENABLE_MAX_BW_18GBPS 2 +# define DP_PCON_ENABLE_MAX_BW_24GBPS 3 +# define DP_PCON_ENABLE_MAX_BW_32GBPS 4 +# define DP_PCON_ENABLE_MAX_BW_40GBPS 5 +# define DP_PCON_ENABLE_MAX_BW_48GBPS 6 +# define DP_PCON_ENABLE_SOURCE_CTL_MODE (1 << 3) +# define DP_PCON_ENABLE_CONCURRENT_LINK (1 << 4) +# define DP_PCON_ENABLE_LINK_FRL_MODE (1 << 5) +# define DP_PCON_ENABLE_HPD_READY (1 << 6) +# define DP_PCON_ENABLE_HDMI_LINK (1 << 7) + +/* PCON CONFIGURE-2 FRL FOR HDMI SINK */ +#define DP_PCON_HDMI_LINK_CONFIG_2 0x305B +# define DP_PCON_MAX_LINK_BW_MASK (0x3F << 0) +# define DP_PCON_FRL_BW_MASK_9GBPS (1 << 0) +# define DP_PCON_FRL_BW_MASK_18GBPS (1 << 1) +# define DP_PCON_FRL_BW_MASK_24GBPS (1 << 2) +# define DP_PCON_FRL_BW_MASK_32GBPS (1 << 3) +# define DP_PCON_FRL_BW_MASK_40GBPS (1 << 4) +# define DP_PCON_FRL_BW_MASK_48GBPS (1 << 5) +# define DP_PCON_FRL_LINK_TRAIN_EXTENDED (1 << 6) + +/* PCON HDMI LINK STATUS */ +#define DP_PCON_HDMI_TX_LINK_STATUS 0x303B +# define DP_PCON_HDMI_TX_LINK_ACTIVE (1 << 0) +# define DP_PCON_FRL_READY (1 << 1) + +/* PCON HDMI POST FRL STATUS */ +#define DP_PCON_HDMI_POST_FRL_STATUS 0x3036 +# define DP_PCON_HDMI_LINK_MODE (1 << 0) +# define DP_PCON_HDMI_MODE_TMDS 0 +# define DP_PCON_HDMI_MODE_FRL 1 +# define DP_PCON_HDMI_FRL_TRAINED_BW (0x3F << 1) +# define DP_PCON_FRL_TRAINED_BW_9GBPS (1 << 1) +# define DP_PCON_FRL_TRAINED_BW_18GBPS (1 << 2) +# define DP_PCON_FRL_TRAINED_BW_24GBPS (1 << 3) +# define DP_PCON_FRL_TRAINED_BW_32GBPS (1 << 4) +# define DP_PCON_FRL_TRAINED_BW_40GBPS (1 << 5) +# define DP_PCON_FRL_TRAINED_BW_48GBPS (1 << 6) + #define DP_PROTOCOL_CONVERTER_CONTROL_0 0x3050 /* DP 1.3 */ # define DP_HDMI_DVI_OUTPUT_CONFIG (1 << 0) /* DP 1.3 */ #define DP_PROTOCOL_CONVERTER_CONTROL_1 0x3051 /* DP 1.3 */ @@ -1063,6 +1213,48 @@ struct drm_device; # define DP_HDMI_FORCE_SCRAMBLING (1 << 3) /* DP 1.4 */ #define DP_PROTOCOL_CONVERTER_CONTROL_2 0x3052 /* DP 1.3 */ # define DP_CONVERSION_TO_YCBCR422_ENABLE (1 << 0) /* DP 1.3 */ +# define DP_PCON_ENABLE_DSC_ENCODER (1 << 1) +# define DP_PCON_ENCODER_PPS_OVERRIDE_MASK (0x3 << 2) +# define DP_PCON_ENC_PPS_OVERRIDE_DISABLED 0 +# define DP_PCON_ENC_PPS_OVERRIDE_EN_PARAMS 1 +# define DP_PCON_ENC_PPS_OVERRIDE_EN_BUFFER 2 +# define DP_CONVERSION_RGB_YCBCR_MASK (7 << 4) +# define DP_CONVERSION_BT601_RGB_YCBCR_ENABLE (1 << 4) +# define DP_CONVERSION_BT709_RGB_YCBCR_ENABLE (1 << 5) +# define DP_CONVERSION_BT2020_RGB_YCBCR_ENABLE (1 << 6) + +/* PCON Downstream HDMI ERROR Status per Lane */ +#define DP_PCON_HDMI_ERROR_STATUS_LN0 0x3037 +#define DP_PCON_HDMI_ERROR_STATUS_LN1 0x3038 +#define DP_PCON_HDMI_ERROR_STATUS_LN2 0x3039 +#define DP_PCON_HDMI_ERROR_STATUS_LN3 0x303A +# define DP_PCON_HDMI_ERROR_COUNT_MASK (0x7 << 0) +# define DP_PCON_HDMI_ERROR_COUNT_THREE_PLUS (1 << 0) +# define DP_PCON_HDMI_ERROR_COUNT_TEN_PLUS (1 << 1) +# define DP_PCON_HDMI_ERROR_COUNT_HUNDRED_PLUS (1 << 2) + +/* PCON HDMI CONFIG PPS Override Buffer + * Valid Offsets to be added to Base : 0-127 + */ +#define DP_PCON_HDMI_PPS_OVERRIDE_BASE 0x3100 + +/* PCON HDMI CONFIG PPS Override Parameter: Slice height + * Offset-0 8LSBs of the Slice height. + * Offset-1 8MSBs of the Slice height. + */ +#define DP_PCON_HDMI_PPS_OVRD_SLICE_HEIGHT 0x3180 + +/* PCON HDMI CONFIG PPS Override Parameter: Slice width + * Offset-0 8LSBs of the Slice width. + * Offset-1 8MSBs of the Slice width. + */ +#define DP_PCON_HDMI_PPS_OVRD_SLICE_WIDTH 0x3182 + +/* PCON HDMI CONFIG PPS Override Parameter: bits_per_pixel + * Offset-0 8LSBs of the bits_per_pixel. + * Offset-1 2MSBs of the bits_per_pixel. + */ +#define DP_PCON_HDMI_PPS_OVRD_BPP 0x3184 /* HDCP 1.3 and HDCP 2.2 */ #define DP_AUX_HDCP_BKSV 0x68000 @@ -1967,4 +2159,30 @@ int drm_dp_get_phy_test_pattern(struct drm_dp_aux *aux, struct drm_dp_phy_test_params *data); int drm_dp_set_phy_test_pattern(struct drm_dp_aux *aux, struct drm_dp_phy_test_params *data, u8 dp_rev); +int drm_dp_get_pcon_max_frl_bw(const u8 dpcd[DP_RECEIVER_CAP_SIZE], + const u8 port_cap[4]); +int drm_dp_pcon_frl_prepare(struct drm_dp_aux *aux, bool enable_frl_ready_hpd); +bool drm_dp_pcon_is_frl_ready(struct drm_dp_aux *aux); +int drm_dp_pcon_frl_configure_1(struct drm_dp_aux *aux, int max_frl_gbps, + bool concurrent_mode); +int drm_dp_pcon_frl_configure_2(struct drm_dp_aux *aux, int max_frl_mask, + bool extended_train_mode); +int drm_dp_pcon_reset_frl_config(struct drm_dp_aux *aux); +int drm_dp_pcon_frl_enable(struct drm_dp_aux *aux); + +bool drm_dp_pcon_hdmi_link_active(struct drm_dp_aux *aux); +int drm_dp_pcon_hdmi_link_mode(struct drm_dp_aux *aux, u8 *frl_trained_mask); +void drm_dp_pcon_hdmi_frl_link_error_count(struct drm_dp_aux *aux, + struct drm_connector *connector); +bool drm_dp_pcon_enc_is_dsc_1_2(const u8 pcon_dsc_dpcd[DP_PCON_DSC_ENCODER_CAP_SIZE]); +int drm_dp_pcon_dsc_max_slices(const u8 pcon_dsc_dpcd[DP_PCON_DSC_ENCODER_CAP_SIZE]); +int drm_dp_pcon_dsc_max_slice_width(const u8 pcon_dsc_dpcd[DP_PCON_DSC_ENCODER_CAP_SIZE]); +int drm_dp_pcon_dsc_bpp_incr(const u8 pcon_dsc_dpcd[DP_PCON_DSC_ENCODER_CAP_SIZE]); +int drm_dp_pcon_pps_default(struct drm_dp_aux *aux); +int drm_dp_pcon_pps_override_buf(struct drm_dp_aux *aux, u8 pps_buf[128]); +int drm_dp_pcon_pps_override_param(struct drm_dp_aux *aux, u8 pps_param[6]); +bool drm_dp_downstream_rgb_to_ycbcr_conversion(const u8 dpcd[DP_RECEIVER_CAP_SIZE], + const u8 port_cap[4], u8 color_spc); +int drm_dp_pcon_convert_rgb_to_ycbcr(struct drm_dp_aux *aux, u8 color_spc); + #endif /* _DRM_DP_HELPER_H_ */ diff --git a/include/drm/drm_drv.h b/include/drm/drm_drv.h index 023076255a7f..827838e0a97e 100644 --- a/include/drm/drm_drv.h +++ b/include/drm/drm_drv.h @@ -495,11 +495,10 @@ struct drm_driver { */ const struct file_operations *fops; +#ifdef CONFIG_DRM_LEGACY /* Everything below here is for legacy driver, never use! */ /* private: */ - /* List of devices hanging off this driver with stealth attach. */ - struct list_head legacy_dev_list; int (*firstopen) (struct drm_device *); void (*preclose) (struct drm_device *, struct drm_file *file_priv); int (*dma_ioctl) (struct drm_device *dev, void *data, struct drm_file *file_priv); @@ -509,9 +508,11 @@ struct drm_driver { int (*enable_vblank)(struct drm_device *dev, unsigned int pipe); void (*disable_vblank)(struct drm_device *dev, unsigned int pipe); int dev_priv_size; +#endif }; -void *__devm_drm_dev_alloc(struct device *parent, struct drm_driver *driver, +void *__devm_drm_dev_alloc(struct device *parent, + const struct drm_driver *driver, size_t size, size_t offset); /** @@ -544,7 +545,7 @@ void *__devm_drm_dev_alloc(struct device *parent, struct drm_driver *driver, ((type *) __devm_drm_dev_alloc(parent, driver, sizeof(type), \ offsetof(type, member))) -struct drm_device *drm_dev_alloc(struct drm_driver *driver, +struct drm_device *drm_dev_alloc(const struct drm_driver *driver, struct device *parent); int drm_dev_register(struct drm_device *dev, unsigned long flags); void drm_dev_unregister(struct drm_device *dev); diff --git a/include/drm/drm_dsc.h b/include/drm/drm_dsc.h index e66560174ff1..cf43561e60fa 100644 --- a/include/drm/drm_dsc.h +++ b/ |