diff options
Diffstat (limited to 'include/linux')
62 files changed, 1074 insertions, 266 deletions
diff --git a/include/linux/acpi.h b/include/linux/acpi.h index 4f2a76224509..90be98981102 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -138,9 +138,9 @@ void acpi_penalize_isa_irq(int irq, int active); void acpi_pci_irq_disable (struct pci_dev *dev); struct acpi_pci_driver { - struct acpi_pci_driver *next; - int (*add)(acpi_handle handle); - void (*remove)(acpi_handle handle); + struct list_head node; + int (*add)(struct acpi_pci_root *root); + void (*remove)(struct acpi_pci_root *root); }; int acpi_pci_register_driver(struct acpi_pci_driver *driver); diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h index 77335fac943e..c12731582920 100644 --- a/include/linux/clk-provider.h +++ b/include/linux/clk-provider.h @@ -26,6 +26,7 @@ #define CLK_IGNORE_UNUSED BIT(3) /* do not gate even if unused */ #define CLK_IS_ROOT BIT(4) /* root clk, has no parent */ #define CLK_IS_BASIC BIT(5) /* Basic clk, can't do a to_clk_foo() */ +#define CLK_GET_RATE_NOCACHE BIT(6) /* do not use the cached clk rate */ struct clk_hw; @@ -360,6 +361,11 @@ int of_clk_add_provider(struct device_node *np, void of_clk_del_provider(struct device_node *np); struct clk *of_clk_src_simple_get(struct of_phandle_args *clkspec, void *data); +struct clk_onecell_data { + struct clk **clks; + unsigned int clk_num; +}; +struct clk *of_clk_src_onecell_get(struct of_phandle_args *clkspec, void *data); const char *of_clk_get_parent_name(struct device_node *np, int index); void of_clk_init(const struct of_device_id *matches); diff --git a/include/linux/compiler-gcc4.h b/include/linux/compiler-gcc4.h index 2f4079175afb..934bc34d5f99 100644 --- a/include/linux/compiler-gcc4.h +++ b/include/linux/compiler-gcc4.h @@ -49,6 +49,13 @@ #endif #endif +#if __GNUC_MINOR__ >= 6 +/* + * Tell the optimizer that something else uses this function or variable. + */ +#define __visible __attribute__((externally_visible)) +#endif + #if __GNUC_MINOR__ > 0 #define __compiletime_object_size(obj) __builtin_object_size(obj, 0) #endif diff --git a/include/linux/compiler.h b/include/linux/compiler.h index 923d093c9cea..f430e4162f41 100644 --- a/include/linux/compiler.h +++ b/include/linux/compiler.h @@ -278,6 +278,10 @@ void ftrace_likely_update(struct ftrace_branch_data *f, int val, int expect); # define __section(S) __attribute__ ((__section__(#S))) #endif +#ifndef __visible +#define __visible +#endif + /* Are two types/vars the same type (ignoring qualifiers)? */ #ifndef __same_type # define __same_type(a, b) __builtin_types_compatible_p(typeof(a), typeof(b)) diff --git a/include/linux/dcache.h b/include/linux/dcache.h index caa34e50537e..59200795482e 100644 --- a/include/linux/dcache.h +++ b/include/linux/dcache.h @@ -206,6 +206,8 @@ struct dentry_operations { #define DCACHE_MANAGED_DENTRY \ (DCACHE_MOUNTED|DCACHE_NEED_AUTOMOUNT|DCACHE_MANAGE_TRANSIT) +#define DCACHE_DENTRY_KILLED 0x100000 + extern seqlock_t rename_lock; static inline int dname_external(struct dentry *dentry) diff --git a/include/linux/device.h b/include/linux/device.h index 52a5f15a2223..af92883bb4a6 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -536,6 +536,10 @@ extern void *__devres_alloc(dr_release_t release, size_t size, gfp_t gfp, #else extern void *devres_alloc(dr_release_t release, size_t size, gfp_t gfp); #endif +extern void devres_for_each_res(struct device *dev, dr_release_t release, + dr_match_t match, void *match_data, + void (*fn)(struct device *, void *, void *), + void *data); extern void devres_free(void *res); extern void devres_add(struct device *dev, void *res); extern void *devres_find(struct device *dev, dr_release_t release, @@ -891,12 +895,15 @@ extern const char *dev_driver_string(const struct device *dev); #ifdef CONFIG_PRINTK -extern int __dev_printk(const char *level, const struct device *dev, - struct va_format *vaf); +extern __printf(3, 0) +int dev_vprintk_emit(int level, const struct device *dev, + const char *fmt, va_list args); +extern __printf(3, 4) +int dev_printk_emit(int level, const struct device *dev, const char *fmt, ...); + extern __printf(3, 4) int dev_printk(const char *level, const struct device *dev, - const char *fmt, ...) - ; + const char *fmt, ...); extern __printf(2, 3) int dev_emerg(const struct device *dev, const char *fmt, ...); extern __printf(2, 3) @@ -914,6 +921,14 @@ int _dev_info(const struct device *dev, const char *fmt, ...); #else +static inline __printf(3, 0) +int dev_vprintk_emit(int level, const struct device *dev, + const char *fmt, va_list args) +{ return 0; } +static inline __printf(3, 4) +int dev_printk_emit(int level, const struct device *dev, const char *fmt, ...) +{ return 0; } + static inline int __dev_printk(const char *level, const struct device *dev, struct va_format *vaf) { return 0; } @@ -946,6 +961,32 @@ int _dev_info(const struct device *dev, const char *fmt, ...) #endif +/* + * Stupid hackaround for existing uses of non-printk uses dev_info + * + * Note that the definition of dev_info below is actually _dev_info + * and a macro is used to avoid redefining dev_info + */ + +#define dev_info(dev, fmt, arg...) _dev_info(dev, fmt, ##arg) + +#if defined(CONFIG_DYNAMIC_DEBUG) +#define dev_dbg(dev, format, ...) \ +do { \ + dynamic_dev_dbg(dev, format, ##__VA_ARGS__); \ +} while (0) +#elif defined(DEBUG) +#define dev_dbg(dev, format, arg...) \ + dev_printk(KERN_DEBUG, dev, format, ##arg) +#else +#define dev_dbg(dev, format, arg...) \ +({ \ + if (0) \ + dev_printk(KERN_DEBUG, dev, format, ##arg); \ + 0; \ +}) +#endif + #define dev_level_ratelimited(dev_level, dev, fmt, ...) \ do { \ static DEFINE_RATELIMIT_STATE(_rs, \ @@ -969,33 +1010,21 @@ do { \ dev_level_ratelimited(dev_notice, dev, fmt, ##__VA_ARGS__) #define dev_info_ratelimited(dev, fmt, ...) \ dev_level_ratelimited(dev_info, dev, fmt, ##__VA_ARGS__) +#if defined(CONFIG_DYNAMIC_DEBUG) || defined(DEBUG) #define dev_dbg_ratelimited(dev, fmt, ...) \ - dev_level_ratelimited(dev_dbg, dev, fmt, ##__VA_ARGS__) - -/* - * Stupid hackaround for existing uses of non-printk uses dev_info - * - * Note that the definition of dev_info below is actually _dev_info - * and a macro is used to avoid redefining dev_info - */ - -#define dev_info(dev, fmt, arg...) _dev_info(dev, fmt, ##arg) - -#if defined(CONFIG_DYNAMIC_DEBUG) -#define dev_dbg(dev, format, ...) \ -do { \ - dynamic_dev_dbg(dev, format, ##__VA_ARGS__); \ +do { \ + static DEFINE_RATELIMIT_STATE(_rs, \ + DEFAULT_RATELIMIT_INTERVAL, \ + DEFAULT_RATELIMIT_BURST); \ + DEFINE_DYNAMIC_DEBUG_METADATA(descriptor, fmt); \ + if (unlikely(descriptor.flags & _DPRINTK_FLAGS_PRINT) && \ + __ratelimit(&_rs)) \ + __dynamic_pr_debug(&descriptor, pr_fmt(fmt), \ + ##__VA_ARGS__); \ } while (0) -#elif defined(DEBUG) -#define dev_dbg(dev, format, arg...) \ - dev_printk(KERN_DEBUG, dev, format, ##arg) #else -#define dev_dbg(dev, format, arg...) \ -({ \ - if (0) \ - dev_printk(KERN_DEBUG, dev, format, ##arg); \ - 0; \ -}) +#define dev_dbg_ratelimited(dev, fmt, ...) \ + no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__) #endif #ifdef VERBOSE_DEBUG diff --git a/include/linux/efi-bgrt.h b/include/linux/efi-bgrt.h new file mode 100644 index 000000000000..051b21fedf68 --- /dev/null +++ b/include/linux/efi-bgrt.h @@ -0,0 +1,21 @@ +#ifndef _LINUX_EFI_BGRT_H +#define _LINUX_EFI_BGRT_H + +#ifdef CONFIG_ACPI_BGRT + +#include <linux/acpi.h> + +void efi_bgrt_init(void); + +/* The BGRT data itself; only valid if bgrt_image != NULL. */ +extern void *bgrt_image; +extern size_t bgrt_image_size; +extern struct acpi_table_bgrt *bgrt_tab; + +#else /* !CONFIG_ACPI_BGRT */ + +static inline void efi_bgrt_init(void) {} + +#endif /* !CONFIG_ACPI_BGRT */ + +#endif /* _LINUX_EFI_BGRT_H */ diff --git a/include/linux/efi.h b/include/linux/efi.h index ec45ccd8708a..8670eb1eb8cd 100644 --- a/include/linux/efi.h +++ b/include/linux/efi.h @@ -496,6 +496,14 @@ extern void efi_map_pal_code (void); extern void efi_memmap_walk (efi_freemem_callback_t callback, void *arg); extern void efi_gettimeofday (struct timespec *ts); extern void efi_enter_virtual_mode (void); /* switch EFI to virtual mode, if possible */ +#ifdef CONFIG_X86 +extern void efi_late_init(void); +extern void efi_free_boot_services(void); +#else +static inline void efi_late_init(void) {} +static inline void efi_free_boot_services(void) {} +#endif +extern void __iomem *efi_lookup_mapped_addr(u64 phys_addr); extern u64 efi_get_iobase (void); extern u32 efi_mem_type (unsigned long phys_addr); extern u64 efi_mem_attributes (unsigned long phys_addr); diff --git a/include/linux/elf.h b/include/linux/elf.h index 999b4f52e8e5..0a05051a8924 100644 --- a/include/linux/elf.h +++ b/include/linux/elf.h @@ -387,7 +387,11 @@ typedef struct elf64_shdr { #define NT_S390_PREFIX 0x305 /* s390 prefix register */ #define NT_S390_LAST_BREAK 0x306 /* s390 breaking event address */ #define NT_S390_SYSTEM_CALL 0x307 /* s390 system call restart data */ +#define NT_S390_TDB 0x308 /* s390 transaction diagnostic block */ #define NT_ARM_VFP 0x400 /* ARM VFP/NEON registers */ +#define NT_ARM_TLS 0x401 /* ARM TLS register */ +#define NT_ARM_HW_BREAK 0x402 /* ARM hardware breakpoint registers */ +#define NT_ARM_HW_WATCH 0x403 /* ARM hardware watchpoint registers */ /* Note header in a PT_NOTE section */ diff --git a/include/linux/extcon.h b/include/linux/extcon.h index cdd401477656..7443a560c9d0 100644 --- a/include/linux/extcon.h +++ b/include/linux/extcon.h @@ -30,19 +30,19 @@ /* * The standard cable name is to help support general notifier - * and notifee device drivers to share the common names. + * and notifiee device drivers to share the common names. * Please use standard cable names unless your notifier device has * a very unique and abnormal cable or * the cable type is supposed to be used with only one unique - * pair of notifier/notifee devices. + * pair of notifier/notifiee devices. * * Please add any other "standard" cables used with extcon dev. * * You may add a dot and number to specify version or specification * of the specific cable if it is required. (e.g., "Fast-charger.18" * and "Fast-charger.10" for 1.8A and 1.0A chargers) - * However, the notifee and notifier should be able to handle such - * string and if the notifee can negotiate the protocol or idenify, + * However, the notifiee and notifier should be able to handle such + * string and if the notifiee can negotiate the protocol or identify, * you don't need such convention. This convention is helpful when * notifier can distinguish but notifiee cannot. */ @@ -76,7 +76,7 @@ struct extcon_cable; * struct extcon_dev - An extcon device represents one external connector. * @name The name of this extcon device. Parent device name is used * if NULL. - * @supported_cable Array of supported cable name ending with NULL. + * @supported_cable Array of supported cable names ending with NULL. * If supported_cable is NULL, cable name related APIs * are disabled. * @mutually_exclusive Array of mutually exclusive set of cables that cannot @@ -95,7 +95,7 @@ struct extcon_cable; * @state Attach/detach state of this extcon. Do not provide at * register-time * @nh Notifier for the state change events from this extcon - * @entry To support list of extcon devices so that uses can search + * @entry To support list of extcon devices so that users can search * for extcon devices based on the extcon name. * @lock * @max_supported Internal value to store the number of cables. @@ -199,7 +199,7 @@ extern int extcon_update_state(struct extcon_dev *edev, u32 mask, u32 state); /* * get/set_cable_state access each bit of the 32b encoded state value. * They are used to access the status of each cable based on the cable_name - * or cable_index, which is retrived by extcon_find_cable_index + * or cable_index, which is retrieved by extcon_find_cable_index */ extern int extcon_find_cable_index(struct extcon_dev *sdev, const char *cable_name); @@ -226,9 +226,9 @@ extern int extcon_unregister_interest(struct extcon_specific_cable_nb *nb); /* * Following APIs are to monitor every action of a notifier. - * Registerer gets notified for every external port of a connection device. + * Registrar gets notified for every external port of a connection device. * Probably this could be used to debug an action of notifier; however, - * we do not recommend to use this at normal 'notifiee' device drivers who + * we do not recommend to use this for normal 'notifiee' device drivers who * want to be notified by a specific external port of the notifier. */ extern int extcon_register_notifier(struct extcon_dev *edev, diff --git a/include/linux/extcon/extcon-adc-jack.h b/include/linux/extcon/extcon-adc-jack.h new file mode 100644 index 000000000000..20e9eef25d4c --- /dev/null +++ b/include/linux/extcon/extcon-adc-jack.h @@ -0,0 +1,71 @@ +/* + * include/linux/extcon/extcon-adc-jack.h + * + * Analog Jack extcon driver with ADC-based detection capability. + * + * Copyright (C) 2012 Samsung Electronics + * MyungJoo Ham <myungjoo.ham@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef _EXTCON_ADC_JACK_H_ +#define _EXTCON_ADC_JACK_H_ __FILE__ + +#include <linux/module.h> +#include <linux/extcon.h> + +/** + * struct adc_jack_cond - condition to use an extcon state + * @state - the corresponding extcon state (if 0, this struct denotes + * the last adc_jack_cond element among the array) + * @min_adc - min adc value for this condition + * @max_adc - max adc value for this condition + * + * For example, if { .state = 0x3, .min_adc = 100, .max_adc = 200}, it means + * that if ADC value is between (inclusive) 100 and 200, than the cable 0 and + * 1 are attached (1<<0 | 1<<1 == 0x3) + * + * Note that you don't need to describe condition for "no cable attached" + * because when no adc_jack_cond is met, state = 0 is automatically chosen. + */ +struct adc_jack_cond { + u32 state; /* extcon state value. 0 if invalid */ + u32 min_adc; + u32 max_adc; +}; + +/** + * struct adc_jack_pdata - platform data for adc jack device. + * @name - name of the extcon device. If null, "adc-jack" is used. + * @consumer_channel - Unique name to identify the channel on the consumer + * side. This typically describes the channels used within + * the consumer. E.g. 'battery_voltage' + * @cable_names - array of cable names ending with null. + * @adc_contitions - array of struct adc_jack_cond conditions ending + * with .state = 0 entry. This describes how to decode + * adc values into extcon state. + * @irq_flags - irq flags used for the @irq + * @handling_delay_ms - in some devices, we need to read ADC value some + * milli-seconds after the interrupt occurs. You may + * describe such delays with @handling_delay_ms, which + * is rounded-off by jiffies. + */ +struct adc_jack_pdata { + const char *name; + const char *consumer_channel; + /* + * The last entry should be NULL + */ + const char **cable_names; + /* The last entry's state should be 0 */ + struct adc_jack_cond *adc_conditions; + + unsigned long irq_flags; + unsigned long handling_delay_ms; /* in ms */ +}; + +#endif /* _EXTCON_ADC_JACK_H */ diff --git a/include/linux/firmware.h b/include/linux/firmware.h index 1e7c01189fa6..e4279fedb93a 100644 --- a/include/linux/firmware.h +++ b/include/linux/firmware.h @@ -12,6 +12,9 @@ struct firmware { size_t size; const u8 *data; struct page **pages; + + /* firmware loader private fields */ + void *priv; }; struct module; @@ -44,6 +47,8 @@ int request_firmware_nowait( void (*cont)(const struct firmware *fw, void *context)); void release_firmware(const struct firmware *fw); +int cache_firmware(const char *name); +int uncache_firmware(const char *name); #else static inline int request_firmware(const struct firmware **fw, const char *name, @@ -62,6 +67,16 @@ static inline int request_firmware_nowait( static inline void release_firmware(const struct firmware *fw) { } + +static inline int cache_firmware(const char *name) +{ + return -ENOENT; +} + +static inline int uncache_firmware(const char *name) +{ + return -EINVAL; +} #endif #endif diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h index 55e6d63d46d0..a52f2f4fe030 100644 --- a/include/linux/ftrace.h +++ b/include/linux/ftrace.h @@ -10,6 +10,7 @@ #include <linux/kallsyms.h> #include <linux/linkage.h> #include <linux/bitops.h> +#include <linux/ptrace.h> #include <linux/ktime.h> #include <linux/sched.h> #include <linux/types.h> @@ -18,6 +19,28 @@ #include <asm/ftrace.h> +/* + * If the arch supports passing the variable contents of + * function_trace_op as the third parameter back from the + * mcount call, then the arch should define this as 1. + */ +#ifndef ARCH_SUPPORTS_FTRACE_OPS +#define ARCH_SUPPORTS_FTRACE_OPS 0 +#endif + +/* + * If the arch's mcount caller does not support all of ftrace's</ |