diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/asm-generic/delay.h | 96 | ||||
| -rw-r--r-- | include/linux/alarmtimer.h | 10 | ||||
| -rw-r--r-- | include/linux/clocksource.h | 1 | ||||
| -rw-r--r-- | include/linux/delay.h | 79 | ||||
| -rw-r--r-- | include/linux/dw_apb_timer.h | 3 | ||||
| -rw-r--r-- | include/linux/hrtimer.h | 51 | ||||
| -rw-r--r-- | include/linux/iopoll.h | 52 | ||||
| -rw-r--r-- | include/linux/jiffies.h | 15 | ||||
| -rw-r--r-- | include/linux/phy.h | 9 | ||||
| -rw-r--r-- | include/linux/posix-timers.h | 72 | ||||
| -rw-r--r-- | include/linux/regmap.h | 38 | ||||
| -rw-r--r-- | include/linux/sched/signal.h | 4 | ||||
| -rw-r--r-- | include/linux/tick.h | 2 | ||||
| -rw-r--r-- | include/linux/timekeeper_internal.h | 114 | ||||
| -rw-r--r-- | include/linux/timekeeping.h | 2 | ||||
| -rw-r--r-- | include/linux/timex.h | 8 | ||||
| -rw-r--r-- | include/linux/wait.h | 4 | ||||
| -rw-r--r-- | include/uapi/asm-generic/siginfo.h | 2 |
18 files changed, 353 insertions, 209 deletions
diff --git a/include/asm-generic/delay.h b/include/asm-generic/delay.h index e448ac61430c..76cf237b6e4c 100644 --- a/include/asm-generic/delay.h +++ b/include/asm-generic/delay.h @@ -2,6 +2,9 @@ #ifndef __ASM_GENERIC_DELAY_H #define __ASM_GENERIC_DELAY_H +#include <linux/math.h> +#include <vdso/time64.h> + /* Undefined functions to get compile-time errors */ extern void __bad_udelay(void); extern void __bad_ndelay(void); @@ -12,34 +15,73 @@ extern void __const_udelay(unsigned long xloops); extern void __delay(unsigned long loops); /* - * The weird n/20000 thing suppresses a "comparison is always false due to - * limited range of data type" warning with non-const 8-bit arguments. + * The microseconds/nanosecond delay multiplicators are used to convert a + * constant microseconds/nanoseconds value to a value which can be used by the + * architectures specific implementation to transform it into loops. + */ +#define UDELAY_CONST_MULT ((unsigned long)DIV_ROUND_UP(1ULL << 32, USEC_PER_SEC)) +#define NDELAY_CONST_MULT ((unsigned long)DIV_ROUND_UP(1ULL << 32, NSEC_PER_SEC)) + +/* + * The maximum constant udelay/ndelay value picked out of thin air to prevent + * too long constant udelays/ndelays. */ +#define DELAY_CONST_MAX 20000 -/* 0x10c7 is 2**32 / 1000000 (rounded up) */ -#define udelay(n) \ - ({ \ - if (__builtin_constant_p(n)) { \ - if ((n) / 20000 >= 1) \ - __bad_udelay(); \ - else \ - __const_udelay((n) * 0x10c7ul); \ - } else { \ - __udelay(n); \ - } \ - }) - -/* 0x5 is 2**32 / 1000000000 (rounded up) */ -#define ndelay(n) \ - ({ \ - if (__builtin_constant_p(n)) { \ - if ((n) / 20000 >= 1) \ - __bad_ndelay(); \ - else \ - __const_udelay((n) * 5ul); \ - } else { \ - __ndelay(n); \ - } \ - }) +/** + * udelay - Inserting a delay based on microseconds with busy waiting + * @usec: requested delay in microseconds + * + * When delaying in an atomic context ndelay(), udelay() and mdelay() are the + * only valid variants of delaying/sleeping to go with. + * + * When inserting delays in non atomic context which are shorter than the time + * which is required to queue e.g. an hrtimer and to enter then the scheduler, + * it is also valuable to use udelay(). But it is not simple to specify a + * generic threshold for this which will fit for all systems. An approximation + * is a threshold for all delays up to 10 microseconds. + * + * When having a delay which is larger than the architecture specific + * %MAX_UDELAY_MS value, please make sure mdelay() is used. Otherwise a overflow + * risk is given. + * + * Please note that ndelay(), udelay() and mdelay() may return early for several + * reasons (https://lists.openwall.net/linux-kernel/2011/01/09/56): + * + * #. computed loops_per_jiffy too low (due to the time taken to execute the + * timer interrupt.) + * #. cache behaviour affecting the time it takes to execute the loop function. + * #. CPU clock rate changes. + */ +static __always_inline void udelay(unsigned long usec) +{ + if (__builtin_constant_p(usec)) { + if (usec >= DELAY_CONST_MAX) + __bad_udelay(); + else + __const_udelay(usec * UDELAY_CONST_MULT); + } else { + __udelay(usec); + } +} + +/** + * ndelay - Inserting a delay based on nanoseconds with busy waiting + * @nsec: requested delay in nanoseconds + * + * See udelay() for basic information about ndelay() and it's variants. + */ +static __always_inline void ndelay(unsigned long nsec) +{ + if (__builtin_constant_p(nsec)) { + if (nsec >= DELAY_CONST_MAX) + __bad_udelay(); + else + __const_udelay(nsec * NDELAY_CONST_MULT); + } else { + __udelay(nsec); + } +} +#define ndelay(x) ndelay(x) #endif /* __ASM_GENERIC_DELAY_H */ diff --git a/include/linux/alarmtimer.h b/include/linux/alarmtimer.h index 05e758b8b894..3ffa5341dce2 100644 --- a/include/linux/alarmtimer.h +++ b/include/linux/alarmtimer.h @@ -20,12 +20,6 @@ enum alarmtimer_type { ALARM_BOOTTIME_FREEZER, }; -enum alarmtimer_restart { - ALARMTIMER_NORESTART, - ALARMTIMER_RESTART, -}; - - #define ALARMTIMER_STATE_INACTIVE 0x00 #define ALARMTIMER_STATE_ENQUEUED 0x01 @@ -42,14 +36,14 @@ enum alarmtimer_restart { struct alarm { struct timerqueue_node node; struct hrtimer timer; - enum alarmtimer_restart (*function)(struct alarm *, ktime_t now); + void (*function)(struct alarm *, ktime_t now); enum alarmtimer_type type; int state; void *data; }; void alarm_init(struct alarm *alarm, enum alarmtimer_type type, - enum alarmtimer_restart (*function)(struct alarm *, ktime_t)); + void (*function)(struct alarm *, ktime_t)); void alarm_start(struct alarm *alarm, ktime_t start); void alarm_start_relative(struct alarm *alarm, ktime_t start); void alarm_restart(struct alarm *alarm); diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h index d35b677b08fe..ef1b16da6ad5 100644 --- a/include/linux/clocksource.h +++ b/include/linux/clocksource.h @@ -215,7 +215,6 @@ static inline s64 clocksource_cyc2ns(u64 cycles, u32 mult, u32 shift) extern int clocksource_unregister(struct clocksource*); extern void clocksource_touch_watchdog(void); -extern void clocksource_change_rating(struct clocksource *cs, int rating); extern void clocksource_suspend(void); extern void clocksource_resume(void); extern struct clocksource * __init clocksource_default_clock(void); diff --git a/include/linux/delay.h b/include/linux/delay.h index ff9cda975e30..89866bab100d 100644 --- a/include/linux/delay.h +++ b/include/linux/delay.h @@ -6,21 +6,12 @@ * Copyright (C) 1993 Linus Torvalds * * Delay routines, using a pre-computed "loops_per_jiffy" value. - * - * Please note that ndelay(), udelay() and mdelay() may return early for - * several reasons: - * 1. computed loops_per_jiffy too low (due to the time taken to - * execute the timer interrupt.) - * 2. cache behaviour affecting the time it takes to execute the - * loop function. - * 3. CPU clock rate changes. - * - * Please see this thread: - * https://lists.openwall.net/linux-kernel/2011/01/09/56 + * Sleep routines using timer list timers or hrtimers. */ #include <linux/math.h> #include <linux/sched.h> +#include <linux/jiffies.h> extern unsigned long loops_per_jiffy; @@ -35,12 +26,21 @@ extern unsigned long loops_per_jiffy; * The 2nd mdelay() definition ensures GCC will optimize away the * while loop for the common cases where n <= MAX_UDELAY_MS -- Paul G. */ - #ifndef MAX_UDELAY_MS #define MAX_UDELAY_MS 5 #endif #ifndef mdelay +/** + * mdelay - Inserting a delay based on milliseconds with busy waiting + * @n: requested delay in milliseconds + * + * See udelay() for basic information about mdelay() and it's variants. + * + * Please double check, whether mdelay() is the right way to go or whether a + * refactoring of the code is the better variant to be able to use msleep() + * instead. + */ #define mdelay(n) (\ (__builtin_constant_p(n) && (n)<=MAX_UDELAY_MS) ? udelay((n)*1000) : \ ({unsigned long __ms=(n); while (__ms--) udelay(1000);})) @@ -63,30 +63,75 @@ unsigned long msleep_interruptible(unsigned int msecs); void usleep_range_state(unsigned long min, unsigned long max, unsigned int state); +/** + * usleep_range - Sleep for an approximate time + * @min: Minimum time in microseconds to sleep + * @max: Maximum time in microseconds to sleep + * + * For basic information please refere to usleep_range_state(). + * + * The task will be in the state TASK_UNINTERRUPTIBLE during the sleep. + */ static inline void usleep_range(unsigned long min, unsigned long max) { usleep_range_state(min, max, TASK_UNINTERRUPTIBLE); } -static inline void usleep_idle_range(unsigned long min, unsigned long max) +/** + * usleep_range_idle - Sleep for an approximate time with idle time accounting + * @min: Minimum time in microseconds to sleep + * @max: Maximum time in microseconds to sleep + * + * For basic information please refere to usleep_range_state(). + * + * The sleeping task has the state TASK_IDLE during the sleep to prevent + * contribution to the load avarage. + */ +static inline void usleep_range_idle(unsigned long min, unsigned long max) { usleep_range_state(min, max, TASK_IDLE); } +/** + * ssleep - wrapper for seconds around msleep + * @seconds: Requested sleep duration in seconds + * + * Please refere to msleep() for detailed information. + */ static inline void ssleep(unsigned int seconds) { msleep(seconds * 1000); } -/* see Documentation/timers/timers-howto.rst for the thresholds */ +static const unsigned int max_slack_shift = 2; +#define USLEEP_RANGE_UPPER_BOUND ((TICK_NSEC << max_slack_shift) / NSEC_PER_USEC) + +/** + * fsleep - flexible sleep which autoselects the best mechanism + * @usecs: requested sleep duration in microseconds + * + * flseep() selects the best mechanism that will provide maximum 25% slack + * to the requested sleep duration. Therefore it uses: + * + * * udelay() loop for sleep durations <= 10 microseconds to avoid hrtimer + * overhead for really short sleep durations. + * * usleep_range() for sleep durations which would lead with the usage of + * msleep() to a slack larger than 25%. This depends on the granularity of + * jiffies. + * * msleep() for all other sleep durations. + * + * Note: When %CONFIG_HIGH_RES_TIMERS is not set, all sleeps are processed with + * the granularity of jiffies and the slack might exceed 25% especially for + * short sleep durations. + */ static inline void fsleep(unsigned long usecs) { if (usecs <= 10) udelay(usecs); - else if (usecs <= 20000) - usleep_range(usecs, 2 * usecs); + else if (usecs < USLEEP_RANGE_UPPER_BOUND) + usleep_range(usecs, usecs + (usecs >> max_slack_shift)); else - msleep(DIV_ROUND_UP(usecs, 1000)); + msleep(DIV_ROUND_UP(usecs, USEC_PER_MSEC)); } #endif /* defined(_LINUX_DELAY_H) */ diff --git a/include/linux/dw_apb_timer.h b/include/linux/dw_apb_timer.h index 82ebf9223948..f8811c46b89e 100644 --- a/include/linux/dw_apb_timer.h +++ b/include/linux/dw_apb_timer.h @@ -34,9 +34,6 @@ struct dw_apb_clocksource { }; void dw_apb_clockevent_register(struct dw_apb_clock_event_device *dw_ced); -void dw_apb_clockevent_pause(struct dw_apb_clock_event_device *dw_ced); -void dw_apb_clockevent_resume(struct dw_apb_clock_event_device *dw_ced); -void dw_apb_clockevent_stop(struct dw_apb_clock_event_device *dw_ced); struct dw_apb_clock_event_device * dw_apb_clockevent_init(int cpu, const char *name, unsigned rating, diff --git a/include/linux/hrtimer.h b/include/linux/hrtimer.h index aa1e65ccb615..7ef5f7ef31a9 100644 --- a/include/linux/hrtimer.h +++ b/include/linux/hrtimer.h @@ -228,32 +228,17 @@ static inline void hrtimer_cancel_wait_running(struct hrtimer *timer) /* Initialize timers: */ extern void hrtimer_init(struct hrtimer *timer, clockid_t which_clock, enum hrtimer_mode mode); -extern void hrtimer_init_sleeper(struct hrtimer_sleeper *sl, clockid_t clock_id, - enum hrtimer_mode mode); +extern void hrtimer_setup(struct hrtimer *timer, enum hrtimer_restart (*function)(struct hrtimer *), + clockid_t clock_id, enum hrtimer_mode mode); +extern void hrtimer_setup_on_stack(struct hrtimer *timer, + enum hrtimer_restart (*function)(struct hrtimer *), + clockid_t clock_id, enum hrtimer_mode mode); +extern void hrtimer_setup_sleeper_on_stack(struct hrtimer_sleeper *sl, clockid_t clock_id, + enum hrtimer_mode mode); #ifdef CONFIG_DEBUG_OBJECTS_TIMERS -extern void hrtimer_init_on_stack(struct hrtimer *timer, clockid_t which_clock, - enum hrtimer_mode mode); -extern void hrtimer_init_sleeper_on_stack(struct hrtimer_sleeper *sl, - clockid_t clock_id, - enum hrtimer_mode mode); - extern void destroy_hrtimer_on_stack(struct hrtimer *timer); #else -static inline void hrtimer_init_on_stack(struct hrtimer *timer, - clockid_t which_clock, - enum hrtimer_mode mode) -{ - hrtimer_init(timer, which_clock, mode); -} - -static inline void hrtimer_init_sleeper_on_stack(struct hrtimer_sleeper *sl, - clockid_t clock_id, - enum hrtimer_mode mode) -{ - hrtimer_init_sleeper(sl, clock_id, mode); -} - static inline void destroy_hrtimer_on_stack(struct hrtimer *timer) { } #endif @@ -337,6 +322,28 @@ static inline int hrtimer_callback_running(struct hrtimer *timer) return timer->base->running == timer; } +/** + * hrtimer_update_function - Update the timer's callback function + * @timer: Timer to update + * @function: New callback function + * + * Only safe to call if the timer is not enqueued. Can be called in the callback function if the + * timer is not enqueued at the same time (see the comments above HRTIMER_STATE_ENQUEUED). + */ +static inline void hrtimer_update_function(struct hrtimer *timer, + enum hrtimer_restart (*function)(struct hrtimer *)) +{ + guard(raw_spinlock_irqsave)(&timer->base->cpu_base->lock); + + if (WARN_ON_ONCE(hrtimer_is_queued(timer))) + return; + + if (WARN_ON_ONCE(!function)) + return; + + timer->function = function; +} + /* Forward a hrtimer so it expires after now: */ extern u64 hrtimer_forward(struct hrtimer *timer, ktime_t now, ktime_t interval); diff --git a/include/linux/iopoll.h b/include/linux/iopoll.h index 19a7b00baff4..91324c331a4b 100644 --- a/include/linux/iopoll.h +++ b/include/linux/iopoll.h @@ -19,19 +19,19 @@ * @op: accessor function (takes @args as its arguments) * @val: Variable to read the value into * @cond: Break condition (usually involving @val) - * @sleep_us: Maximum time to sleep between reads in us (0 - * tight-loops). Should be less than ~20ms since usleep_range - * is used (see Documentation/timers/timers-howto.rst). + * @sleep_us: Maximum time to sleep between reads in us (0 tight-loops). Please + * read usleep_range() function description for details and + * limitations. * @timeout_us: Timeout in us, 0 means never timeout * @sleep_before_read: if it is true, sleep @sleep_us before read. * @args: arguments for @op poll * - * Returns 0 on success and -ETIMEDOUT upon a timeout. In either - * case, the last read value at @args is stored in @val. Must not - * be called from atomic context if sleep_us or timeout_us are used. - * * When available, you'll probably want to use one of the specialized * macros defined below rather than this macro directly. + * + * Returns: 0 on success and -ETIMEDOUT upon a timeout. In either + * case, the last read value at @args is stored in @val. Must not + * be called from atomic context if sleep_us or timeout_us are used. */ #define read_poll_timeout(op, val, cond, sleep_us, timeout_us, \ sleep_before_read, args...) \ @@ -64,22 +64,22 @@ * @op: accessor function (takes @args as its arguments) * @val: Variable to read the value into * @cond: Break condition (usually involving @val) - * @delay_us: Time to udelay between reads in us (0 tight-loops). Should - * be less than ~10us since udelay is used (see - * Documentation/timers/timers-howto.rst). + * @delay_us: Time to udelay between reads in us (0 tight-loops). Please + * read udelay() function description for details and + * limitations. * @timeout_us: Timeout in us, 0 means never timeout * @delay_before_read: if it is true, delay @delay_us before read. * @args: arguments for @op poll * - * Returns 0 on success and -ETIMEDOUT upon a timeout. In either - * case, the last read value at @args is stored in @val. - * * This macro does not rely on timekeeping. Hence it is safe to call even when * timekeeping is suspended, at the expense of an underestimation of wall clock * time, which is rather minimal with a non-zero delay_us. * * When available, you'll probably want to use one of the specialized * macros defined below rather than this macro directly. + * + * Returns: 0 on success and -ETIMEDOUT upon a timeout. In either + * case, the last read value at @args is stored in @val. */ #define read_poll_timeout_atomic(op, val, cond, delay_us, timeout_us, \ delay_before_read, args...) \ @@ -119,17 +119,17 @@ * @addr: Address to poll * @val: Variable to read the value into * @cond: Break condition (usually involving @val) - * @sleep_us: Maximum time to sleep between reads in us (0 - * tight-loops). Should be less than ~20ms since usleep_range - * is used (see Documentation/timers/timers-howto.rst). + * @sleep_us: Maximum time to sleep between reads in us (0 tight-loops). Please + * read usleep_range() function description for details and + * limitations. * @timeout_us: Timeout in us, 0 means never timeout * - * Returns 0 on success and -ETIMEDOUT upon a timeout. In either - * case, the last read value at @addr is stored in @val. Must not - * be called from atomic context if sleep_us or timeout_us are used. - * * When available, you'll probably want to use one of the specialized * macros defined below rather than this macro directly. + * + * Returns: 0 on success and -ETIMEDOUT upon a timeout. In either + * case, the last read value at @addr is stored in @val. Must not + * be called from atomic context if sleep_us or timeout_us are used. */ #define readx_poll_timeout(op, addr, val, cond, sleep_us, timeout_us) \ read_poll_timeout(op, val, cond, sleep_us, timeout_us, false, addr) @@ -140,16 +140,16 @@ * @addr: Address to poll * @val: Variable to read the value into * @cond: Break condition (usually involving @val) - * @delay_us: Time to udelay between reads in us (0 tight-loops). Should - * be less than ~10us since udelay is used (see - * Documentation/timers/timers-howto.rst). + * @delay_us: Time to udelay between reads in us (0 tight-loops). Please + * read udelay() function description for details and + * limitations. * @timeout_us: Timeout in us, 0 means never timeout * - * Returns 0 on success and -ETIMEDOUT upon a timeout. In either - * case, the last read value at @addr is stored in @val. - * * When available, you'll probably want to use one of the specialized * macros defined below rather than this macro directly. + * + * Returns: 0 on success and -ETIMEDOUT upon a timeout. In either + * case, the last read value at @addr is stored in @val. */ #define readx_poll_timeout_atomic(op, addr, val, cond, delay_us, timeout_us) \ read_poll_timeout_atomic(op, val, cond, delay_us, timeout_us, false, addr) diff --git a/include/linux/jiffies.h b/include/linux/jiffies.h index 1220f0fbe5bf..ed945f42e064 100644 --- a/include/linux/jiffies.h +++ b/include/linux/jiffies.h @@ -502,7 +502,7 @@ static inline unsigned long _msecs_to_jiffies(const unsigned int m) * - all other values are converted to jiffies by either multiplying * the input value by a factor or dividing it with a factor and * handling any 32-bit overflows. - * for the details see __msecs_to_jiffies() + * for the details see _msecs_to_jiffies() * * msecs_to_jiffies() checks for the passed in value being a constant * via __builtin_constant_p() allowing gcc to eliminate most of the @@ -526,6 +526,19 @@ static __always_inline unsigned long msecs_to_jiffies(const unsigned int m) } } +/** + * secs_to_jiffies: - convert seconds to jiffies + * @_secs: time in seconds + * + * Conversion is done by simple multiplication with HZ + * + * secs_to_jiffies() is defined as a macro rather than a static inline + * function so it can be used in static initializers. + * + * Return: jiffies value + */ +#define secs_to_jiffies(_secs) ((_secs) * HZ) + extern unsigned long __usecs_to_jiffies(const unsigned int u); #if !(USEC_PER_SEC % HZ) static inline unsigned long _usecs_to_jiffies(const unsigned int u) diff --git a/include/linux/phy.h b/include/linux/phy.h index a98bc91a0cde..504766d4b2d5 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -1378,12 +1378,13 @@ int phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum); * @regnum: The register on the MMD to read * @val: Variable to read the register into * @cond: Break condition (usually involving @val) - * @sleep_us: Maximum time to sleep between reads in us (0 - * tight-loops). Should be less than ~20ms since usleep_range - * is used (see Documentation/timers/timers-howto.rst). + * @sleep_us: Maximum time to sleep between reads in us (0 tight-loops). Please + * read usleep_range() function description for details and + * limitations. * @timeout_us: Timeout in us, 0 means never timeout * @sleep_before_read: if it is true, sleep @sleep_us before read. - * Returns 0 on success and -ETIMEDOUT upon a timeout. In either + * + * Returns: 0 on success and -ETIMEDOUT upon a timeout. In either * case, the last read value at @args is stored in @val. Must not * be called from atomic context if sleep_us or timeout_us are used. */ diff --git a/include/linux/posix-timers.h b/include/linux/posix-timers.h index 453691710839..f11f10c97bd9 100644 --- a/include/linux/posix-timers.h +++ b/include/linux/posix-timers.h @@ -5,12 +5,16 @@ #include <linux/alarmtimer.h> #include <linux/list.h> #include <linux/mutex.h> +#include <linux/pid.h> #include <linux/posix-timers_types.h> +#include <linux/rcuref.h> #include <linux/spinlock.h> #include <linux/timerqueue.h> struct kernel_siginfo; struct task_struct; +struct sigqueue; +struct k_itimer; static inline clockid_t make_process_cpuclock(const unsigned int pid, const clockid_t clock) @@ -35,6 +39,8 @@ static inline int clockid_to_fd(const clockid_t clk) #ifdef CONFIG_POSIX_TIMERS +#include <linux/signal_types.h> + /** * cpu_timer - Posix CPU timer representation for k_itimer * @node: timerqueue node to queue in the task/sig @@ -42,6 +48,7 @@ static inline int clockid_to_fd(const clockid_t clk) * @pid: Pointer to target task PID * @elist: List head for the expiry list * @firing: Timer is currently firing + * @nanosleep: Timer is used for nanosleep and is not a regular posix-timer * @handling: Pointer to the task which handles expiry */ struct cpu_timer { @@ -49,7 +56,8 @@ struct cpu_timer { struct timerqueue_head *head; struct pid *pid; struct list_head elist; - int firing; + bool firing; + bool nanosleep; struct task_struct __rcu *handling; }; @@ -101,6 +109,12 @@ static inline void posix_cputimers_rt_watchdog(struct posix_cputimers *pct, pct->bases[CPUCLOCK_SCHED].nextevt = runtime; } +void posixtimer_rearm_itimer(struct task_struct *p); +bool posixtimer_init_sigqueue(struct sigqueue *q); +void posixtimer_send_sigqueue(struct k_itimer *tmr); +bool posixtimer_deliver_signal(struct kernel_siginfo *info, struct sigqueue *timer_sigq); +void posixtimer_free_timer(struct k_itimer *timer); + /* Init task static initializer */ #define INIT_CPU_TIMERBASE(b) { \ .nextevt = U64_MAX, \ @@ -122,6 +136,10 @@ struct cpu_timer { }; static inline void posix_cputimers_init(struct posix_cputimers *pct) { } static inline void posix_cputimers_group_init(struct posix_cputimers *pct, u64 cpu_limit) { } +static inline void posixtimer_rearm_itimer(struct task_struct *p) { } +static inline bool posixtimer_deliver_signal(struct kernel_siginfo *info, + struct sigqueue *timer_sigq) { return false; } +static inline void posixtimer_free_timer(struct k_itimer *timer) { } #endif #ifdef CONFIG_POSIX_CPU_TIMERS_TASK_WORK @@ -132,50 +150,56 @@ static inline void clear_posix_cputimers_work(struct task_struct *p) { } static inline void posix_cputimers_init_work(void) { } #endif -#define REQUEUE_PENDING 1 - /** * struct k_itimer - POSIX.1b interval timer structure. - * @list: List head for binding the timer to signals->posix_timers + * @list: List node for binding the timer to tsk::signal::posix_timers + * @ignored_list: List node for tracking ignored timers in tsk::signal::ignored_posix_timers * @t_hash: Entry in the posix timer hash table * @it_lock: Lock protecting the timer * @kclock: Pointer to the k_clock struct handling this timer * @it_clock: The posix timer clock id * @it_id: The posix timer id for identifying the timer - * @it_active: Marker that timer is active + * @it_status: The status of the timer + * @it_sig_periodic: The periodic status at signal delivery * @it_overrun: The overrun counter for pending signals * @it_overrun_last: The overrun at the time of the last delivered signal - * @it_requeue_pending: Indicator that timer waits for being requeued on - * signal delivery + * @it_signal_seq: Sequence count to control signal delivery + * @it_sigqueue_seq: The sequence count at the point where the signal was queued * @it_sigev_notify: The notify word of sigevent struct for signal delivery * @it_interval: The interval for periodic timers * @it_signal: Pointer to the creators signal struct * @it_pid: The pid of the process/task targeted by the signal * @it_process: The task to wakeup on clock_nanosleep (CPU timers) - * @sigq: Pointer to preallocated sigqueue + * @rcuref: Reference count for life time management + * @sigq: Embedded sigqueue * @it: Union representing the various posix timer type * internals. * @rcu: RCU head for freeing the timer. */ struct k_itimer { struct hlist_node list; + struct hlist_node ignored_list; struct hlist_node t_hash; spinlock_t it_lock; const struct k_clock *kclock; clockid_t it_clock; timer_t it_id; - int it_active; + int it_status; + bool it_sig_periodic; s64 it_overrun; s64 it_overrun_last; - int it_requeue_pending; + unsigned int it_signal_seq; + unsigned int it_sigqueue_seq; int it_sigev_notify; + enum pid_type it_pid_type; ktime_t it_interval; struct signal_struct *it_signal; union { struct pid *it_pid; struct task_struct *it_process; }; - struct sigqueue *sigq; + struct sigqueue sigq; + rcuref_t rcuref; union { struct { struct hrtimer timer; @@ -196,5 +220,29 @@ void set_process_cpu_timer(struct task_struct *task, unsigned int clock_idx, int update_rlimit_cpu(struct task_struct *task, unsigned long rlim_new); -void posixtimer_rearm(struct kernel_siginfo *info); +#ifdef CONFIG_POSIX_TIMERS +static inline void posixtimer_putref(struct k_itimer *tmr) +{ + if (rcuref_put(&tmr->rcuref)) + posixtimer_free_timer(tmr); +} + +static inline void posixtimer_sigqueue_getref(struct sigqueue *q) +{ + struct k_itimer *tmr = container_of(q, struct k_itimer, sigq); + + WARN_ON_ONCE(!rcuref_get(&tmr->rcuref)); +} + +static inline void posixtimer_sigqueue_putref(struct sigqueue *q) +{ + struct k_itimer *tmr = container_of(q, struct k_itimer, sigq); + + posixtimer_putref(tmr); +} +#else /* CONFIG_POSIX_TIMERS */ +static inline void posixtimer_sigqueue_getref(struct sigqueue *q) { } +static inline void posixtimer_sigqueue_putref(struct sigqueue *q) { } +#endif /* !CONFIG_POSIX_TIMERS */ + #endif diff --git a/include/linux/regmap.h b/include/linux/regmap.h index f9ccad32fc5c..75f162b60ba1 100644 --- a/include/linux/regmap.h +++ b/include/linux/regmap.h @@ -106,17 +106,17 @@ struct reg_sequence { * @addr: Address to poll * @val: Unsigned integer variable to read the value into * @cond: Break condition (usually involving @val) - * @sleep_us: Maximum time to sleep between reads in us (0 - * tight-loops). Should be less than ~20ms since usleep_range - * is used (see Documentation/timers/timers-howto.rst). + * @sleep_us: Maximum time to sleep between reads in us (0 tight-loops). Please + * read usleep_range() function description for details and + * limitations. * @timeout_us: Timeout in us, 0 means never timeout * - * Returns 0 on success and -ETIMEDOUT upon a timeout or the regmap_read + * This is modelled after the readx_poll_timeout macros in linux/iopoll.h. + * + * Returns: 0 on success and -ETIMEDOUT upon a timeout or the regmap_read * error return value in case of a error read. In the two former cases, * the last read value at @addr is stored in @val. Must not be called * from atomic context if sleep_us or timeout_us are used. - * - * This is modelled after the readx_poll_timeout macros in linux/iopoll.h. */ #define regmap_read_poll_timeout(map, addr, val, cond, sleep_us, timeout_us) \ ({ \ @@ -133,20 +133,20 @@ struct reg_sequence { * @addr: Address to poll * @val: Unsigned integer variable to read the value into * @cond: Break condition (usually involving @val) - * @delay_us: Time to udelay between reads in us (0 tight-loops). - * Should be less than ~10us since udelay is used - * (see Documentation/timers/timers-howto.rst). + * @delay_us: Time to udelay between reads in us (0 tight-loops). Please + * read udelay() function description for details and + * limitations. * @timeout_us: Timeout in us, 0 means never timeout * - * Returns 0 on success and -ETIMEDOUT upon a timeout or the regmap_read - * error return value in case of a error read. In the two former cases, - * the last read value at @addr is stored in @val. - * * This is modelled after the readx_poll_timeout_atomic macros in linux/iopoll.h. * * Note: In general regmap cannot be used in atomic context. If you want to use * this macro then first setup your regmap for atomic use (flat or no cache * and MMIO regmap). + * + * Returns: 0 on success and -ETIMEDOUT upon a timeout or the regmap_read + * error return value in case of a error read. In the two former cases, + * the last read value at @addr is stored in @val. */ #define regmap_read_poll_timeout_atomic(map, addr, val, cond, delay_us, timeout_us) \ ({ \ @@ -177,17 +177,17 @@ struct reg_sequence { * @field: Regmap field to read from * @val: Unsigned integer variable to read the value into * @cond: Break condition (usually involving @val) - * @sleep_us: Maximum time to sleep between reads in us (0 - * tight-loops). Should be less than ~20ms since usleep_range - * is used (see Documentation/timers/timers-howto.rst). + * @sleep_us: Maximum time to sleep between reads in us (0 tight-loops). Please + * read usleep_range() function description for details and + * limitations. * @timeout_us: Timeout in us, 0 means never timeout * - * Returns 0 on success and -ETIMEDOUT upon a timeout or the regmap_field_read + * This is modelled after the readx_poll_timeout macros in linux/iopoll.h. + * + * Returns: 0 on success and -ETIMEDOUT upon a timeout or the regmap_field_read * error return value in case of a error read. In the two former cases, * the last read value at @addr is stored in @val. Must not be called * from atomic context if sleep_us or timeout_us are used. - * - * This is modelled after the readx_poll_timeout macros in linux/iopoll.h. */ #define regmap_field_read_poll_timeout(field, val, cond, sleep_us, timeout_us) \ ({ \ diff --git a/include/linux/sched/signal.h b/include/linux/sched/signal.h index c8ed09ac29ac..d5d03d919df8 100644 --- a/include/linux/sched/signal.h +++ b/include/linux/sched/signal.h @@ -138,6 +138,7 @@ struct signal_struct { /* POSIX.1b Interval Timers */ unsigned int next_posix_timer_id; struct hlist_head posix_timers; + struct hlist_head ignored_posix_timers; /* ITIMER_REAL timer for the process */ struct hrtimer real_timer; @@ -338,9 +339,6 @@ extern void force_fatal_sig(int); extern void force_exit_sig(int); extern int send_sig(int, struct task_struct *, int); extern int zap_other_threads(struct task_struct *p); -extern struct sigqueue *sigqueue_alloc(void); -extern void sigqueue_free(struct sigqueue *); -extern int send_sigqueue(struct sigqueue *, struct pid *, enum pid_type); extern int do_sigaction(int, struct k_sigaction *, struct k_sigaction *); static inline void clear_notify_signal(void) diff --git a/include/linux/tick.h b/include/linux/tick.h index 99c9c5a7252a..b8ddc8e631a3 100644 --- a/include/linux/tick.h +++ b/include/linux/tick.h @@ -20,12 +20,10 @@ extern void __init tick_init(void); extern void tick_suspend_local(void); /* Should be core only, but XEN resume magic and ARM BL switcher require it */ extern void tick_resume_local(void); |