| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
commit 190113b4c6531c8e09b31d5235f9b5175cbb0f72 upstream.
Prarit reported that depending on the affinity setting the
' irq $N: Affinity broken due to vector space exhaustion.'
message is showing up in dmesg, but the vector space on the CPUs in the
affinity mask is definitely not exhausted.
Shung-Hsi provided traces and analysis which pinpoints the problem:
The ordering of trying to assign an interrupt vector in
assign_irq_vector_any_locked() is simply wrong if the interrupt data has a
valid node assigned. It does:
1) Try the intersection of affinity mask and node mask
2) Try the node mask
3) Try the full affinity mask
4) Try the full online mask
Obviously #2 and #3 are in the wrong order as the requested affinity
mask has to take precedence.
In the observed cases #1 failed because the affinity mask did not contain
CPUs from node 0. That made it allocate a vector from node 0, thereby
breaking affinity and emitting the misleading message.
Revert the order of #2 and #3 so the full affinity mask without the node
intersection is tried before actually affinity is broken.
If no node is assigned then only the full affinity mask and if that fails
the full online mask is tried.
Fixes: d6ffc6ac83b1 ("x86/vector: Respect affinity mask in irq descriptor")
Reported-by: Prarit Bhargava <prarit@redhat.com>
Reported-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87ft4djtyp.fsf@nanos.tec.linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a493d1ca1a03b532871f1da27f8dbda2b28b04c4 upstream.
sync_core_before_usermode() had an incorrect optimization. If the kernel
returns from an interrupt, it can get to usermode without IRET. It just has
to schedule to a different task in the same mm and do SYSRET. Fortunately,
there were no callers of sync_core_before_usermode() that could have had
in_irq() or in_nmi() equal to true, because it's only ever called from the
scheduler.
While at it, clarify a related comment.
Fixes: 70216e18e519 ("membarrier: Provide core serializing command, *_SYNC_CORE")
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/5afc7632be1422f91eaf7611aaaa1b5b8580a086.1607058304.git.luto@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 29ac40cbed2bc06fa218ca25d7f5e280d3d08a25 upstream.
The PAT bit is in different locations for 4k and 2M/1G page table
entries.
Add a definition for _PAGE_LARGE_CACHE_MASK to represent the three
caching bits (PWT, PCD, PAT), similar to _PAGE_CACHE_MASK for 4k pages,
and use it in the definition of PMD_FLAGS_DEC_WP to get the correct PAT
index for write-protected pages.
Fixes: 6ebcb060713f ("x86/mm: Add support to encrypt the kernel in-place")
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20201111160946.147341-1-nivedita@alum.mit.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit eeaf06af6f87e1dba371fbe42674e6f963220b9c upstream.
My patch caused kernel Oopses and delays in boot. Revert it.
The problem was that I moved the "mem->dma = paddr;" before the call to
be_fill_queue(). But the first thing that the be_fill_queue() function
does is memset the whole struct to zero which overwrites the assignment.
Link: https://lore.kernel.org/r/X8jXkt6eThjyVP1v@mwanda
Fixes: 38b2db564d9a ("scsi: be2iscsi: Fix a theoretical leak in beiscsi_create_eqs()")
Cc: stable <stable@vger.kernel.org>
Reported-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 14dc3983b5dff513a90bd5a8cc90acaf7867c3d0 upstream.
genksyms does not know or care about the _Static_assert() built-in, and
sometimes falls back to ignoring the later symbols, which causes
undefined behavior such as
WARNING: modpost: EXPORT symbol "ethtool_set_ethtool_phy_ops" [vmlinux] version generation failed, symbol will not be versioned.
ld: net/ethtool/common.o: relocation R_AARCH64_ABS32 against `__crc_ethtool_set_ethtool_phy_ops' can not be used when making a shared object
net/ethtool/common.o:(_ftrace_annotated_branch+0x0): dangerous relocation: unsupported relocation
Redefine static_assert for genksyms to avoid that.
Link: https://lkml.kernel.org/r/20201203230955.1482058-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Cc: Marco Elver <elver@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6246d7c9d15aaff0bc3863f67900c6a6e6be921b upstream.
The CMD13 polling is needed for commands with R1B responses. In commit
a0d4c7eb71dd ("mmc: block: Add CMD13 polling for MMC IOCTLS with R1B
response"), the intent was to introduce this for requests targeted to the
RPMB partition. However, the condition to trigger the polling loop became
wrong, leading to unnecessary polling. Let's fix the condition to avoid
this.
Fixes: a0d4c7eb71dd ("mmc: block: Add CMD13 polling for MMC IOCTLS with R1B response")
Cc: stable@vger.kernel.org
Reported-by: Zhan Liu <zliua@micron.com>
Signed-off-by: Zhan Liu <zliua@micron.com>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Link: https://lore.kernel.org/r/20201202202320.22165-1-huobean@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 47a0001436352c9853d72bf2071e85b316d688a2 upstream.
Debounce filter setting should be independent from IRQ type setting
because according to the ACPI specs, there are separate arguments for
specifying debounce timeout and IRQ type in GpioIo() and GpioInt().
Together with commit 06abe8291bc31839950f7d0362d9979edc88a666
("pinctrl: amd: fix incorrect way to disable debounce filter") and
Andy's patch "gpiolib: acpi: Take into account debounce settings" [1],
this will fix broken touchpads for laptops whose BIOS set the
debounce timeout to a relatively large value. For example, the BIOS
of Lenovo AMD gaming laptops including Legion-5 15ARH05 (R7000),
Legion-5P (R7000P) and IdeaPad Gaming 3 15ARH05, set the debounce
timeout to 124.8ms. This led to the kernel receiving only ~7 HID
reports per second from the Synaptics touchpad
(MSFT0001:00 06CB:7F28).
Existing touchpads like [2][3] are not troubled by this bug because
the debounce timeout has been set to 0 by the BIOS before enabling
the debounce filter in setting IRQ type.
[1] https://lore.kernel.org/linux-gpio/20201111222008.39993-11-andriy.shevchenko@linux.intel.com/
8dcb7a15a585 ("gpiolib: acpi: Take into account debounce settings")
[2] https://github.com/Syniurge/i2c-amd-mp2/issues/11#issuecomment-721331582
[3] https://forum.manjaro.org/t/random-short-touchpad-freezes/30832/28
Signed-off-by: Coiby Xu <coiby.xu@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-gpio/CAHp75VcwiGREBUJ0A06EEw-SyabqYsp%2Bdqs2DpSrhaY-2GVdAA%40mail.gmail.com/
BugLink: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1887190
Link: https://lore.kernel.org/r/20201125130320.311059-1-coiby.xu@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ce6520b0eafad5962ffc21dc47cd7bd3250e9045 upstream.
The touchpad operates in Basic Mode by default in the Acer BIOS
setup, but some Aspire/TravelMate models require the i8042 to be
reset in order to be correctly detected.
Signed-off-by: Chris Chiu <chiu@endlessos.org>
Link: https://lore.kernel.org/r/20201207071250.15021-1-chiu@endlessos.org
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 82e06090473289ce63e23fdeb8737aad59b10645 upstream.
We need to make sure we are not stomping on the control URB that was
issued when opening the device when attempting to toggle buzzer.
To do that we need to mark it as pending in cm109_open().
Reported-and-tested-by: syzbot+150f793ac5bc18eee150@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 8b205d3e1bf52ab31cdd5c55f87c87a227793d84 ]
The Pavilion 13 x360 PC has a chassis-type which does not indicate it is
a convertible, while it is actually a convertible. Add it to the
dmi_switches_allow_list.
Signed-off-by: Max Verevkin <me@maxverevkin.tk>
Link: https://lore.kernel.org/r/20201124131652.11165-1-me@maxverevkin.tk
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
as KEY_LIGHTS_TOGGLE
[ Upstream commit 9e7a005ad56aa7d6ea5830c5ffcc60bf35de380b ]
Got a dmesg message on my AMD Renoir based Acer laptop:
"acer_wmi: Unknown key number - 0x84" when toggling keyboard
background light
Signed-off-by: Timo Witte <timo.witte@gmail.com>
Reviewed-by: "Lee, Chun-Yi" <jlee@suse.com>
Link: https://lore.kernel.org/r/20200804001423.36778-1-timo.witte@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
Yoga 11e 4th gen
[ Upstream commit c986a7024916c92a775fc8d853fba3cae1d5fde4 ]
The Thinkpad Yoga 11e 4th gen with the N3450 / Celeron CPU only has
one battery which is named BAT1 instead of the expected BAT0, add a
quirk for this. This fixes not being able to set the charging tresholds
on this model; and this alsoe fixes the following errors in dmesg:
ACPI: \_SB_.PCI0.LPCB.EC__.HKEY: BCTG evaluated but flagged as error
thinkpad_acpi: Error probing battery 2
battery: extension failed to load: ThinkPad Battery Extension
battery: extension unregistered: ThinkPad Battery Extension
Note that the added quirk is for the "R0K" BIOS versions which are
used on the Thinkpad Yoga 11e 4th gen's with a Celeron CPU, there
is a separate "R0L" BIOS for the i3/i5 based versions. This may also
need the same quirk, but if that really is necessary is unknown.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20201109103550.16265-1-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f2eae1888cf22590c38764b8fa3c989c0283870e ]
The Yoga 11e series has 2 accelerometers described by a BOSC0200 ACPI node.
This setup relies on a Windows service which reads both accelerometers and
then calculates the angle between the 2 halves to determine laptop / tent /
tablet mode and then reports the calculated mode back to the EC by calling
special ACPI methods on the BOSC0200 node.
The bmc150 iio driver does not support this (it involves double
calculations requiring sqrt and arccos so this really needs to be done
in userspace), as a result of this on the Yoga 11e the thinkpad_acpi
code always reports SW_TABLET_MODE=0, starting with GNOME 3.38 reporting
SW_TABLET_MODE=0 causes GNOME to:
1. Not show the onscreen keyboard when a text-input field is focussed
with the touchscreen.
2. Disable accelerometer based auto display-rotation.
This makes sense when in laptop-mode but not when in tablet-mode. But
since for the Yoga 11e the thinkpad_acpi code always reports
SW_TABLET_MODE=0, GNOME does not know when the device is in tablet-mode.
Stop reporting the broken (always 0) SW_TABLET_MODE on Yoga 11e models
to fix this.
Note there are plans for userspace to support 360 degree hinges style
2-in-1s with 2 accelerometers and figure out the mode by itself, see:
https://gitlab.freedesktop.org/hadess/iio-sensor-proxy/-/issues/216
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20201106140130.46820-1-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2663b3388551230cbc4606a40fabf3331ceb59e4 ]
The local variable 'cpumask_t mask' is in the stack memory, and its address
is assigned to 'desc->affinity' in 'irq_set_affinity_hint()'.
But the memory area where this variable is located is at risk of being
modified.
During LTP testing, the following error was generated:
Unable to handle kernel paging request at virtual address ffff000012e9b790
Mem abort info:
ESR = 0x96000007
Exception class = DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
Data abort info:
ISV = 0, ISS = 0x00000007
CM = 0, WnR = 0
swapper pgtable: 4k pages, 48-bit VAs, pgdp = 0000000075ac5e07
[ffff000012e9b790] pgd=00000027dbffe003, pud=00000027dbffd003,
pmd=00000027b6d61003, pte=0000000000000000
Internal error: Oops: 96000007 [#1] PREEMPT SMP
Modules linked in: xt_conntrack
Process read_all (pid: 20171, stack limit = 0x0000000044ea4095)
CPU: 14 PID: 20171 Comm: read_all Tainted: G B W
Hardware name: NXP Layerscape LX2160ARDB (DT)
pstate: 80000085 (Nzcv daIf -PAN -UAO)
pc : irq_affinity_hint_proc_show+0x54/0xb0
lr : irq_affinity_hint_proc_show+0x4c/0xb0
sp : ffff00001138bc10
x29: ffff00001138bc10 x28: 0000ffffd131d1e0
x27: 00000000007000c0 x26: ffff8025b9480dc0
x25: ffff8025b9480da8 x24: 00000000000003ff
x23: ffff8027334f8300 x22: ffff80272e97d000
x21: ffff80272e97d0b0 x20: ffff8025b9480d80
x19: ffff000009a49000 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000
x15: 0000000000000000 x14: 0000000000000000
x13: 0000000000000000 x12: 0000000000000040
x11: 0000000000000000 x10: ffff802735b79b88
x9 : 0000000000000000 x8 : 0000000000000000
x7 : ffff000009a49848 x6 : 0000000000000003
x5 : 0000000000000000 x4 : ffff000008157d6c
x3 : ffff00001138bc10 x2 : ffff000012e9b790
x1 : 0000000000000000 x0 : 0000000000000000
Call trace:
irq_affinity_hint_proc_show+0x54/0xb0
seq_read+0x1b0/0x440
proc_reg_read+0x80/0xd8
__vfs_read+0x60/0x178
vfs_read+0x94/0x150
ksys_read+0x74/0xf0
__arm64_sys_read+0x24/0x30
el0_svc_common.constprop.0+0xd8/0x1a0
el0_svc_handler+0x34/0x88
el0_svc+0x10/0x14
Code: f9001bbf 943e0732 f94066c2 b4000062 (f9400041)
---[ end trace b495bdcb0b3b732b ]---
Kernel panic - not syncing: Fatal exception
SMP: stopping secondary CPUs
SMP: failed to stop secondary CPUs 0,2-4,6,8,11,13-15
Kernel Offset: disabled
CPU features: 0x0,21006008
Memory Limit: none
---[ end Kernel panic - not syncing: Fatal exception ]---
Fix it by using 'cpumask_of(cpu)' to get the cpumask.
Signed-off-by: Hao Si <si.hao@zte.com.cn>
Signed-off-by: Lin Chen <chen.lin5@zte.com.cn>
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 74cde1a53368aed4f2b4b54bf7030437f64a534b ]
On systems without HW-based collections (i.e. anything except GIC-500),
we rely on firmware to perform the ITS save/restore. This doesn't
really work, as although FW can properly save everything, it cannot
fully restore the state of the command queue (the read-side is reset
to the head of the queue). This results in the ITS consuming previously
processed commands, potentially corrupting the state.
Instead, let's always save the ITS state on suspend, disabling it in the
process, and restore the full state on resume. This saves us from broken
FW as long as it doesn't enable the ITS by itself (for which we can't do
anything).
This amounts to simply dropping the ITS_FLAGS_SAVE_SUSPEND_STATE.
Signed-off-by: Xu Qiang <xuqiang36@huawei.com>
[maz: added warning on resume, rewrote commit message]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201107104226.14282-1-xuqiang36@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 73cc291c270248567245f084dcdf5078069af6b5 ]
If someone plays with the UFS clk scaling devfreq governor through sysfs,
ufshcd_devfreq_scale may be called even when HBA is not runtime ACTIVE.
This can lead to unexpected error. We cannot just protect it by calling
pm_runtime_get_sync() because that may cause a race condition since HBA
runtime suspend ops need to suspend clk scaling. To fix this call
pm_runtime_get_noresume() and check HBA's runtime status. Only proceed if
HBA is runtime ACTIVE, otherwise just bail.
governor_store
devfreq_performance_handler
update_devfreq
devfreq_set_target
ufshcd_devfreq_target
ufshcd_devfreq_scale
Link: https://lore.kernel.org/r/1600758548-28576-1-git-send-email-cang@codeaurora.org
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e42404fa10fd11fe72d0a0e149a321d10e577715 ]
To start stack unwinding (SP, PC and BLINK) are needed. When the
explicit execution context (pt_regs etc) is not available, unwinder
assumes the task is sleeping (in __switch_to()) and fetches SP and BLINK
from kernel mode stack.
But this assumption is not true, specially in a SMP system, when top
runs on 1 core, there may be active running processes on all cores.
So when unwinding non courrent tasks, ensure they are NOT running.
And while at it, handle the self unwinding case explicitly.
This came out of investigation of a customer reported hang with
rcutorture+top
Link: https://github.com/foss-for-synopsys-dwc-arc-processors/linux/issues/31
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e02152ba2810f7c88cb54e71cda096268dfa9241 ]
Currently a build with CONFIG_E200=y will fail with:
Error: invalid switch -me200
Error: unrecognized option -me200
Upstream binutils has never supported an -me200 option. Presumably it
was supported at some point by either a fork or Freescale internal
binutils.
We can't support code that we can't even build test, so drop the
addition of -me200 to the build flags, so we can at least build with
CONFIG_E200=y.
Reported-by: Németh Márton <nm127@freemail.hu>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Scott Wood <oss@buserror.net>
Link: https://lore.kernel.org/r/20201116120913.165317-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fe56d05ee6c87f6a1a8c7267affd92c9438249cc ]
During CSA, we briefly nullify the phy context, in __iwl_mvm_unassign_vif_chanctx.
In case we have a FW assert right after it, it remains NULL though.
We end up running into endless loop due to mac80211 trying repeatedly to
move us to ASSOC state, and we keep returning -EINVAL. Later down the road
we hit a kernel panic.
Detect and avoid this endless loop.
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20201107104557.d64de2c17bff.Iedd0d2afa20a2aacba5259a5cae31cb3a119a4eb@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0011c6d182774fc781fb9e115ebe8baa356029ae ]
Recently introduced async probe on mmc devices can shuffle block IDs.
Pin them to fixed values to ease booting in environments where UUIDs
are not practical. Use newly introduced aliases for mmcblk devices from [1].
[1]
https://patchwork.kernel.org/patch/11747669/
Signed-off-by: Markus Reichl <m.reichl@fivetechno.de>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20201104162356.1251-1-m.reichl@fivetechno.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 04516706bb99889986ddfa3a769ed50d2dc7ac13 ]
When we read device memory, we lock a spinlock, write the address we
want to read from the device and then spin in a loop reading the data
in 32-bit quantities from another register.
As the description makes clear, this is rather inefficient, incurring
a PCIe bus transaction for every read. In a typical device today, we
want to read 786k SMEM if it crashes, leading to 192k register reads.
Occasionally, we've seen the whole loop take over 20 seconds and then
triggering the soft lockup detector.
Clearly, it is unreasonable to spin here for such extended periods of
time.
To fix this, break the loop down into an outer and an inner loop, and
break out of the inner loop if more than half a second elapsed. To
avoid too much overhead, check for that only every 128 reads, though
there's no particular reason for that number. Then, unlock and relock
to obtain NIC access again, reprogram the start address and continue.
This will keep (interrupt) latencies on the CPU down to a reasonable
time.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20201022165103.45878a7e49aa.I3b9b9c5a10002915072312ce75b68ed5b3dc6e14@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d853b3406903a7dc5b14eb5bada3e8cd677f66a2 ]
Clang warns:
drivers/spi/spi-bcm2835aux.c:532:50: warning: variable 'err' is
uninitialized when used here [-Wuninitialized]
dev_err(&pdev->dev, "could not get clk: %d\n", err);
^~~
./include/linux/dev_printk.h:112:32: note: expanded from macro 'dev_err'
_dev_err(dev, dev_fmt(fmt), ##__VA_ARGS__)
^~~~~~~~~~~
drivers/spi/spi-bcm2835aux.c:495:9: note: initialize the variable 'err'
to silence this warning
int err;
^
= 0
1 warning generated.
Restore the assignment so that the error value can be used in the
dev_err statement and there is no uninitialized memory being leaked.
Fixes: e13ee6cc4781 ("spi: bcm2835aux: Fix use-after-free on unbind")
Link: https://github.com/ClangBuiltLinux/linux/issues/1199
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Link: https://lore.kernel.org/r/20201113180701.455541-1-natechancellor@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
[lukas: backport to 4.19-stable, add stable designation]
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: <stable@vger.kernel.org> # v4.4+: e13ee6cc4781: spi: bcm2835aux: Fix use-after-free on unbind
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit e13ee6cc4781edaf8c7321bee19217e3702ed481 ]
bcm2835aux_spi_remove() accesses the driver's private data after calling
spi_unregister_master() even though that function releases the last
reference on the spi_master and thereby frees the private data.
Fix by switching over to the new devm_spi_alloc_master() helper which
keeps the private data accessible until the driver has unbound.
Fixes: b9dd3f6d4172 ("spi: bcm2835aux: Fix controller unregister order")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: <stable@vger.kernel.org> # v4.4+: 5e844cc37a5c: spi: Introduce device-managed SPI controller allocation
Cc: <stable@vger.kernel.org> # v4.4+: b9dd3f6d4172: spi: bcm2835aux: Fix controller unregister order
Cc: <stable@vger.kernel.org> # v4.4+
Link: https://lore.kernel.org/r/b290b06357d0c0bdee9cecc539b840a90630f101.1605121038.git.lukas@wunner.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4d6ffa27b8e5116c0abb318790fd01d4e12d75e6 upstream.
Commit
393f203f5fd5 ("x86_64: kasan: add interceptors for memset/memmove/memcpy functions")
added .weak directives to arch/x86/lib/mem*_64.S instead of changing the
existing ENTRY macros to WEAK. This can lead to the assembly snippet
.weak memcpy
...
.globl memcpy
which will produce a STB_WEAK memcpy with GNU as but STB_GLOBAL memcpy
with LLVM's integrated assembler before LLVM 12. LLVM 12 (since
https://reviews.llvm.org/D90108) will error on such an overridden symbol
binding.
Commit
ef1e03152cb0 ("x86/asm: Make some functions local")
changed ENTRY in arch/x86/lib/memcpy_64.S to SYM_FUNC_START_LOCAL, which
was ineffective due to the preceding .weak directive.
Use the appropriate SYM_FUNC_START_WEAK instead.
Fixes: 393f203f5fd5 ("x86_64: kasan: add interceptors for memset/memmove/memcpy functions")
Fixes: ef1e03152cb0 ("x86/asm: Make some functions local")
Reported-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Fangrui Song <maskray@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20201103012358.168682-1-maskray@google.com
[nd: backport due to missing
commit e9b9d020c487 ("x86/asm: Annotate aliases")
commit ffedeeb780dc ("linkage: Introduce new macros for assembler symbols")]
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b8a9092330da2030496ff357272f342eb970d51b upstream.
Clang's integrated assembler produces the warning for assembly files:
warning: DWARF2 only supports one section per compilation unit
If -Wa,-gdwarf-* is unspecified, then debug info is not emitted for
assembly sources (it is still emitted for C sources). This will be
re-enabled for newer DWARF versions in a follow up patch.
Enables defconfig+CONFIG_DEBUG_INFO to build cleanly with
LLVM=1 LLVM_IAS=1 for x86_64 and arm64.
Cc: <stable@vger.kernel.org>
Link: https://github.com/ClangBuiltLinux/linux/issues/716
Reported-by: Dmitry Golovin <dima@golovin.in>
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Suggested-by: Dmitry Golovin <dima@golovin.in>
Suggested-by: Nathan Chancellor <natechancellor@gmail.com>
Suggested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Fangrui Song <maskray@google.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
[nd: backport to avoid conflicts from:
commit 10e68b02c861 ("Makefile: support compressed debug info")
commit 7b16994437c7 ("Makefile: Improve compressed debug info support detection")
commit 695afd3d7d58 ("kbuild: Simplify DEBUG_INFO Kconfig handling")]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Pavel Machek (CIP) <pavel@denx.de>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Link: https://lore.kernel.org/r/20201210142602.272595094@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c02bd115b1d25931159f89c7d9bf47a30f5d4b41 upstream.
This reverts commit 4179b00c04d1 ("geneve: pull IP header before ECN decapsulation").
Eric says: "network header should have been pulled already before
hitting geneve_rx()". Let's revert the syzbot fix since it's causing
more harm than good, and revisit.
Suggested-by: Eric Dumazet <edumazet@google.com>
Reported-by: Jianlin Shi <jishi@redhat.com>
Fixes: 4179b00c04d1 ("geneve: pull IP header before ECN decapsulation")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=210569
Link: https://lore.kernel.org/netdev/CANn89iJVWfb=2i7oU1=D55rOyQnBbbikf+Mc6XHMkY7YX-yGEw@mail.gmail.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 12cb908a11b2544b5f53e9af856e6b6a90ed5533 upstream
Since insn.prefixes.nbytes can be bigger than the size of
insn.prefixes.bytes[] when a prefix is repeated, the proper check must
be
insn.prefixes.bytes[i] != 0 and i < 4
instead of using insn.prefixes.nbytes. Use the new
for_each_insn_prefix() macro which does it correctly.
Debugged by Kees Cook <keescook@chromium.org>.
[ bp: Massage commit message. ]
Fixes: 32d0b95300db ("x86/insn-eval: Add utility functions to get segment selector")
Reported-by: syzbot+9b64b619f10f19d19a7c@syzkaller.appspotmail.com
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/160697104969.3146288.16329307586428270032.stgit@devnote2
[sudip: adjust context]
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c0700dfa2cae44c033ed97dade8a2679c7d22a9d upstream.
There are reports wrt lockdep splat in nftables, e.g.:
------------[ cut here ]------------
WARNING: CPU: 2 PID: 31416 at net/netfilter/nf_tables_api.c:622
lockdep_nfnl_nft_mutex_not_held+0x28/0x38 [nf_tables]
...
These are caused by an earlier, unrelated bug such as a n ABBA deadlock
in a different subsystem.
In such an event, lockdep is disabled and lockdep_is_held returns true
unconditionally. This then causes the WARN() in nf_tables.
Make the WARN conditional on lockdep still active to avoid this.
Fixes: f102d66b335a417 ("netfilter: nf_tables: use dedicated mutex to guard transactions")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Link: https://lore.kernel.org/linux-kselftest/CA+G9fYvFUpODs+NkSYcnwKnXm62tmP=ksLeBPmB+KFrB2rvCtQ@mail.gmail.com/
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 855b69857830f8d918d715014f05e59a3f7491a0 upstream.
Fix to return a negative error code from the error handling case
instead of 0 in function i8042_setup_aux(), as done elsewhere in this
function.
Fixes: f81134163fc7 ("Input: i8042 - use platform_driver_probe")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Luo Meng <luomeng12@huawei.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20201123133420.4071187-1-luomeng12@huawei.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 857c4c0a8b2888d806f4308c58f59a6a81a1dee9 upstream.
Building on arch/s390/ results in this build error:
cc1: some warnings being treated as errors
../drivers/md/dm-writecache.c: In function 'persistent_memory_claim':
../drivers/md/dm-writecache.c:323:1: error: no return statement in function returning non-void [-Werror=return-type]
Fix this by replacing the BUG() with an -EOPNOTSUPP return.
Fixes: 48debafe4f2f ("dm: add writecache target")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e9acf0298c664f825e6f1158f2a97341bf9e03ca upstream.
Fix to return the error code from qup_i2c_change_state()
instaed of 0 in qup_i2c_bam_schedule_desc().
Fixes: fbf9921f8b35d9b2 ("i2c: qup: Fix error handling")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 778721510e84209f78e31e2ccb296ae36d623f5e upstream.
If gfs2 tries to mount a (corrupt) file system that has no resource
groups it still tries to set preferences on the first one, which causes
a kernel null pointer dereference. This patch adds a check to function
gfs2_ri_update so this condition is detected and reported back as an
error.
Reported-by: syzbot+e3f23ce40269a4c9053a@syzkaller.appspotmail.com
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bcee5278958802b40ee8b26679155a6d9231783e upstream.
When the instances were able to use their own options, the userstacktrace
option was left hardcoded for the top level. This made the instance
userstacktrace option bascially into a nop, and will confuse users that set
it, but nothing happens (I was confused when it happened to me!)
Cc: stable@vger.kernel.org
Fixes: 16270145ce6b ("tracing: Add trace options for core options to instances")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 666224b43b4bd4612ce3b758c038f9bc5c5e3fcb ]
The DMA channel was not released if either devm_request_irq() or
devm_spi_register_controller() failed.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20191212135550.4634-3-peter.ujfalusi@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
[lukas: backport to 4.19-stable]
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit e1483ac030fb4c57734289742f1c1d38dca61e22 ]
bcm2835_spi_remove() accesses the driver's private data after calling
spi_unregister_controller() even though that function releases the last
reference on the spi_controller and thereby frees the private data.
Fix by switching over to the new devm_spi_alloc_master() helper which
keeps the private data accessible until the driver has unbound.
Fixes: f8043872e796 ("spi: add driver for BCM2835")
Reported-by: Sascha Hauer <s.hauer@pengutronix.de>
Reported-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: <stable@vger.kernel.org> # v3.10+: 5e844cc37a5c: spi: Introduce device-managed SPI controller allocation
Cc: <stable@vger.kernel.org> # v3.10+
Cc: Vladimir Oltean <olteanv@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/ad66e0a0ad96feb848814842ecf5b6a4539ef35c.1605121038.git.lukas@wunner.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 63c5395bb7a9777a33f0e7b5906f2c0170a23692 upstream
bcm_qspi_remove() calls spi_unregister_master() even though
bcm_qspi_probe() calls devm_spi_register_master(). The spi_master is
therefore unregistered and freed twice on unbind.
Moreover, since commit 0392727c261b ("spi: bcm-qspi: Handle clock probe
deferral"), bcm_qspi_probe() leaks the spi_master allocation if the call
to devm_clk_get_optional() fails.
Fix by switching over to the new devm_spi_alloc_master() helper which
keeps the private data accessible until the driver has unbound and also
avoids the spi_master leak on probe.
While at it, fix an ordering issue in bcm_qspi_remove() wherein
spi_unregister_master() is called after uninitializing the hardware,
disabling the clock and freeing an IRQ data structure. The correct
order is to call spi_unregister_master() *before* those teardown steps
because bus accesses may still be ongoing until that function returns.
Fixes: fa236a7ef240 ("spi: bcm-qspi: Add Broadcom MSPI driver")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: <stable@vger.kernel.org> # v4.9+: 123456789abc: spi: Introduce device-managed SPI controller allocation
Cc: <stable@vger.kernel.org> # v4.9+
Cc: Kamal Dasu <kdasu.kdev@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/5e31a9a59fd1c0d0b795b2fe219f25e5ee855f9d.1605121038.git.lukas@wunner.de
Signed-off-by: Mark Brown <broonie@kernel.org>
[sudip: adjust context]
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 5e844cc37a5cbaa460e68f9a989d321d63088a89 ]
SPI driver probing currently comprises two steps, whereas removal
comprises only one step:
spi_alloc_master()
spi_register_controller()
spi_unregister_controller()
That's because spi_unregister_controller() calls device_unregister()
instead of device_del(), thereby releasing the reference on the
spi_controller which was obtained by spi_alloc_master().
An SPI driver's private data is contained in the same memory allocation
as the spi_controller struct. Thus, once spi_unregister_controller()
has been called, the private data is inaccessible. But some drivers
need to access it after spi_unregister_controller() to perform further
teardown steps.
Introduce devm_spi_alloc_master() and devm_spi_alloc_slave(), which
release a reference on the spi_controller struct only after the driver
has unbound, thereby keeping the memory allocation accessible. Change
spi_unregister_controller() to not release a reference if the
spi_controller was allocated by one of these new devm functions.
The present commit is small enough to be backportable to stable.
It allows fixing drivers which use the private data in their ->remove()
hook after it's been freed. It also allows fixing drivers which neglect
to release a reference on the spi_controller in the probe error path.
Long-term, most SPI drivers shall be moved over to the devm functions
introduced herein. The few that can't shall be changed in a treewide
commit to explicitly release the last reference on the controller.
That commit shall amend spi_unregister_controller() to no longer release
a reference, thereby completing the migration.
As a result, the behaviour will be less surprising and more consistent
with subsystems such as IIO, which also includes the private data in the
allocation of the generic iio_dev struct, but calls device_del() in
iio_device_unregister().
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Link: https://lore.kernel.org/r/272bae2ef08abd21388c98e23729886663d19192.1605121038.git.lukas@wunner.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4165bf015ba9454f45beaad621d16c516d5c5afe upstream.
According to the AMD IOMMU spec, the commit 73db2fc595f3
("iommu/amd: Increase interrupt remapping table limit to 512 entries")
also requires the interrupt table length (IntTabLen) to be set to 9
(power of 2) in the device table mapping entry (DTE).
Fixes: 73db2fc595f3 ("iommu/amd: Increase interrupt remapping table limit to 512 entries")
Reported-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20201207091920.3052-1-suravee.suthikulpanit@amd.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f0992098cadb4c9c6a00703b66cafe604e178fea upstream.
Speakup exposing a line discipline allows userland to try to use it,
while it is deemed to be useless, and thus uselessly exposes potential
bugs. One of them is simply that in such a case if the line sends data,
spk_ttyio_receive_buf2 is called and crashes since spk_ttyio_synth
is NULL.
This change restricts the use of the speakup line discipline to
speakup drivers, thus avoiding such kind of issues altogether.
Cc: stable@vger.kernel.org
Reported-by: Shisong Qin <qinshisong1205@gmail.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Tested-by: Shisong Qin <qinshisong1205@gmail.com>
Link: https://lore.kernel.org/r/20201129193523.hm3f6n5xrn6fiyyc@function
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1de67a3dee7a279ebe4d892b359fe3696938ec15 upstream.
Arbitration Lost (IAL) can happen after every single byte transfer. If
arbitration is lost, the I2C hardware will autonomously switch from
master mode to slave. If a transfer is not aborted in this state,
consecutive transfers will not be executed by the hardware and will
timeout.
Signed-off-by: Christian Eggers <ceggers@arri.de>
Tested (not extensively) on Vybrid VF500 (Toradex VF50):
Tested-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 384a9565f70a876c2e78e58c5ca0bbf0547e4f6d upstream.
According to the "VFxxx Controller Reference Manual" (and the comment
block starting at line 97), Vybrid requires writing |
