summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-05-09ext4: fix bug_on in start_this_handle during umount filesystemYe Bin1-5/+10
[ Upstream commit b98535d091795a79336f520b0708457aacf55c67 ] We got issue as follows: ------------[ cut here ]------------ kernel BUG at fs/jbd2/transaction.c:389! invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 9 PID: 131 Comm: kworker/9:1 Not tainted 5.17.0-862.14.0.6.x86_64-00001-g23f87daf7d74-dirty #197 Workqueue: events flush_stashed_error_work RIP: 0010:start_this_handle+0x41c/0x1160 RSP: 0018:ffff888106b47c20 EFLAGS: 00010202 RAX: ffffed10251b8400 RBX: ffff888128dc204c RCX: ffffffffb52972ac RDX: 0000000000000200 RSI: 0000000000000004 RDI: ffff888128dc2050 RBP: 0000000000000039 R08: 0000000000000001 R09: ffffed10251b840a R10: ffff888128dc204f R11: ffffed10251b8409 R12: ffff888116d78000 R13: 0000000000000000 R14: dffffc0000000000 R15: ffff888128dc2000 FS: 0000000000000000(0000) GS:ffff88839d680000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000001620068 CR3: 0000000376c0e000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> jbd2__journal_start+0x38a/0x790 jbd2_journal_start+0x19/0x20 flush_stashed_error_work+0x110/0x2b3 process_one_work+0x688/0x1080 worker_thread+0x8b/0xc50 kthread+0x26f/0x310 ret_from_fork+0x22/0x30 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- Above issue may happen as follows: umount read procfs error_work ext4_put_super flush_work(&sbi->s_error_work); ext4_mb_seq_groups_show ext4_mb_load_buddy_gfp ext4_mb_init_group ext4_mb_init_cache ext4_read_block_bitmap_nowait ext4_validate_block_bitmap ext4_error ext4_handle_error schedule_work(&EXT4_SB(sb)->s_error_work); ext4_unregister_sysfs(sb); jbd2_journal_destroy(sbi->s_journal); journal_kill_thread journal->j_flags |= JBD2_UNMOUNT; flush_stashed_error_work jbd2_journal_start start_this_handle BUG_ON(journal->j_flags & JBD2_UNMOUNT); To solve this issue, we call 'ext4_unregister_sysfs() before flushing s_error_work in ext4_put_super(). Signed-off-by: Ye Bin <yebin10@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com> Link: https://lore.kernel.org/r/20220322012419.725457-1-yebin10@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-09ASoC: wm8731: Disable the regulator when probing failsZheyu Ma1-8/+11
[ Upstream commit 92ccbf17eeacf510cf1eed9c252d9332ca24f02d ] When the driver fails during probing, the driver should disable the regulator, not just handle it in wm8731_hw_init(). The following log reveals it: [ 17.812483] WARNING: CPU: 1 PID: 364 at drivers/regulator/core.c:2257 _regulator_put+0x3ec/0x4e0 [ 17.815958] RIP: 0010:_regulator_put+0x3ec/0x4e0 [ 17.824467] Call Trace: [ 17.824774] <TASK> [ 17.825040] regulator_bulk_free+0x82/0xe0 [ 17.825514] devres_release_group+0x319/0x3d0 [ 17.825882] i2c_device_probe+0x766/0x940 [ 17.829198] i2c_register_driver+0xb5/0x130 Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Link: https://lore.kernel.org/r/20220405121038.4094051-1-zheyuma97@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-09ASoC: Intel: soc-acpi: correct device endpoints for max98373Chao Song1-2/+2
[ Upstream commit 97326be14df7bacc6ba5c62c0556298c27ea0432 ] The left speaker of max98373 uses spk_r_endpoint, and right speaker uses spk_l_endpoint, this is obviously wrong. This patch corrects the endpoints for max98373 codec. Signed-off-by: Chao Song <chao.song@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20220406192341.271465-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-09tcp: fix F-RTO may not work correctly when receiving DSACKPengcheng Yang1-1/+2
[ Upstream commit d9157f6806d1499e173770df1f1b234763de5c79 ] Currently DSACK is regarded as a dupack, which may cause F-RTO to incorrectly enter "loss was real" when receiving DSACK. Packetdrill to demonstrate: // Enable F-RTO and TLP 0 `sysctl -q net.ipv4.tcp_frto=2` 0 `sysctl -q net.ipv4.tcp_early_retrans=3` 0 `sysctl -q net.ipv4.tcp_congestion_control=cubic` // Establish a connection +0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 // RTT 10ms, RTO 210ms +.1 < S 0:0(0) win 32792 <mss 1000,sackOK,nop,nop,nop,wscale 7> +0 > S. 0:0(0) ack 1 <...> +.01 < . 1:1(0) ack 1 win 257 +0 accept(3, ..., ...) = 4 // Send 2 data segments +0 write(4, ..., 2000) = 2000 +0 > P. 1:2001(2000) ack 1 // TLP +.022 > P. 1001:2001(1000) ack 1 // Continue to send 8 data segments +0 write(4, ..., 10000) = 10000 +0 > P. 2001:10001(8000) ack 1 // RTO +.188 > . 1:1001(1000) ack 1 // The original data is acked and new data is sent(F-RTO step 2.b) +0 < . 1:1(0) ack 2001 win 257 +0 > P. 10001:12001(2000) ack 1 // D-SACK caused by TLP is regarded as a dupack, this results in // the incorrect judgment of "loss was real"(F-RTO step 3.a) +.022 < . 1:1(0) ack 2001 win 257 <sack 1001:2001,nop,nop> // Never-retransmitted data(3001:4001) are acked and // expect to switch to open state(F-RTO step 3.b) +0 < . 1:1(0) ack 4001 win 257 +0 %{ assert tcpi_ca_state == 0, tcpi_ca_state }% Fixes: e33099f96d99 ("tcp: implement RFC5682 F-RTO") Signed-off-by: Pengcheng Yang <yangpc@wangsu.com> Acked-by: Neal Cardwell <ncardwell@google.com> Tested-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/1650967419-2150-1-git-send-email-yangpc@wangsu.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-09Revert "ibmvnic: Add ethtool private flag for driver-defined queue limits"Dany Madden2-100/+35
[ Upstream commit aeaf59b78712c7a1827c76f086acff4f586e072f ] This reverts commit 723ad916134784b317b72f3f6cf0f7ba774e5dae When client requests channel or ring size larger than what the server can support the server will cap the request to the supported max. So, the client would not be able to successfully request resources that exceed the server limit. Fixes: 723ad9161347 ("ibmvnic: Add ethtool private flag for driver-defined queue limits") Signed-off-by: Dany Madden <drt@linux.ibm.com> Link: https://lore.kernel.org/r/20220427235146.23189-1-drt@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-09ibmvnic: fix miscellaneous checksLijun Pan1-8/+9
[ Upstream commit 91dc5d2553fbf20e2e8384ac997f278a50c70561 ] Fix the following checkpatch checks: CHECK: Macro argument 'off' may be better as '(off)' to avoid precedence issues CHECK: Alignment should match open parenthesis CHECK: multiple assignments should be avoided CHECK: Blank lines aren't necessary before a close brace '}' CHECK: Please use a blank line after function/struct/union/enum declarations CHECK: Unnecessary parentheses around 'rc != H_FUNCTION' Signed-off-by: Lijun Pan <lijunp213@gmail.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-09ixgbe: ensure IPsec VF<->PF compatibilityLeon Romanovsky1-1/+2
[ Upstream commit f049efc7f7cd2f3c419f55040928eaefb13b3636 ] The VF driver can forward any IPsec flags and such makes the function is not extendable and prone to backward/forward incompatibility. If new software runs on VF, it won't know that PF configured something completely different as it "knows" only XFRM_OFFLOAD_INBOUND flag. Fixes: eda0333ac293 ("ixgbe: add VF IPsec management") Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Shannon Nelson <snelson@pensando.io> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20220427173152.443102-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-09net: fec: add missing of_node_put() in fec_enet_init_stop_mode()Yang Yingliang1-1/+1
[ Upstream commit d2b52ec056d5bddb055c8f21d7489a23548d0838 ] Put device node in error path in fec_enet_init_stop_mode(). Fixes: 8a448bf832af ("net: ethernet: fec: move GPR register offset and bit into DT") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20220426125231.375688-1-yangyingliang@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-09bnx2x: fix napi API usage sequenceManish Chopra1-4/+5
[ Upstream commit af68656d66eda219b7f55ce8313a1da0312c79e1 ] While handling PCI errors (AER flow) driver tries to disable NAPI [napi_disable()] after NAPI is deleted [__netif_napi_del()] which causes unexpected system hang/crash. System message log shows the following: ======================================= [ 3222.537510] EEH: Detected PCI bus error on PHB#384-PE#800000 [ 3222.537511] EEH: This PCI device has failed 2 times in the last hour and will be permanently disabled after 5 failures. [ 3222.537512] EEH: Notify device drivers to shutdown [ 3222.537513] EEH: Beginning: 'error_detected(IO frozen)' [ 3222.537514] EEH: PE#800000 (PCI 0384:80:00.0): Invoking bnx2x->error_detected(IO frozen) [ 3222.537516] bnx2x: [bnx2x_io_error_detected:14236(eth14)]IO error detected [ 3222.537650] EEH: PE#800000 (PCI 0384:80:00.0): bnx2x driver reports: 'need reset' [ 3222.537651] EEH: PE#800000 (PCI 0384:80:00.1): Invoking bnx2x->error_detected(IO frozen) [ 3222.537651] bnx2x: [bnx2x_io_error_detected:14236(eth13)]IO error detected [ 3222.537729] EEH: PE#800000 (PCI 0384:80:00.1): bnx2x driver reports: 'need reset' [ 3222.537729] EEH: Finished:'error_detected(IO frozen)' with aggregate recovery state:'need reset' [ 3222.537890] EEH: Collect temporary log [ 3222.583481] EEH: of node=0384:80:00.0 [ 3222.583519] EEH: PCI device/vendor: 168e14e4 [ 3222.583557] EEH: PCI cmd/status register: 00100140 [ 3222.583557] EEH: PCI-E capabilities and status follow: [ 3222.583744] EEH: PCI-E 00: 00020010 012c8da2 00095d5e 00455c82 [ 3222.583892] EEH: PCI-E 10: 10820000 00000000 00000000 00000000 [ 3222.583893] EEH: PCI-E 20: 00000000 [ 3222.583893] EEH: PCI-E AER capability register set follows: [ 3222.584079] EEH: PCI-E AER 00: 13c10001 00000000 00000000 00062030 [ 3222.584230] EEH: PCI-E AER 10: 00002000 000031c0 000001e0 00000000 [ 3222.584378] EEH: PCI-E AER 20: 00000000 00000000 00000000 00000000 [ 3222.584416] EEH: PCI-E AER 30: 00000000 00000000 [ 3222.584416] EEH: of node=0384:80:00.1 [ 3222.584454] EEH: PCI device/vendor: 168e14e4 [ 3222.584491] EEH: PCI cmd/status register: 00100140 [ 3222.584492] EEH: PCI-E capabilities and status follow: [ 3222.584677] EEH: PCI-E 00: 00020010 012c8da2 00095d5e 00455c82 [ 3222.584825] EEH: PCI-E 10: 10820000 00000000 00000000 00000000 [ 3222.584826] EEH: PCI-E 20: 00000000 [ 3222.584826] EEH: PCI-E AER capability register set follows: [ 3222.585011] EEH: PCI-E AER 00: 13c10001 00000000 00000000 00062030 [ 3222.585160] EEH: PCI-E AER 10: 00002000 000031c0 000001e0 00000000 [ 3222.585309] EEH: PCI-E AER 20: 00000000 00000000 00000000 00000000 [ 3222.585347] EEH: PCI-E AER 30: 00000000 00000000 [ 3222.586872] RTAS: event: 5, Type: Platform Error (224), Severity: 2 [ 3222.586873] EEH: Reset without hotplug activity [ 3224.762767] EEH: Beginning: 'slot_reset' [ 3224.762770] EEH: PE#800000 (PCI 0384:80:00.0): Invoking bnx2x->slot_reset() [ 3224.762771] bnx2x: [bnx2x_io_slot_reset:14271(eth14)]IO slot reset initializing... [ 3224.762887] bnx2x 0384:80:00.0: enabling device (0140 -> 0142) [ 3224.768157] bnx2x: [bnx2x_io_slot_reset:14287(eth14)]IO slot reset --> driver unload Uninterruptible tasks ===================== crash> ps | grep UN 213 2 11 c000000004c89e00 UN 0.0 0 0 [eehd] 215 2 0 c000000004c80000 UN 0.0 0 0 [kworker/0:2] 2196 1 28 c000000004504f00 UN 0.1 15936 11136 wickedd 4287 1 9 c00000020d076800 UN 0.0 4032 3008 agetty 4289 1 20 c00000020d056680 UN 0.0 7232 3840 agetty 32423 2 26 c00000020038c580 UN 0.0 0 0 [kworker/26:3] 32871 4241 27 c0000002609ddd00 UN 0.1 18624 11648 sshd 32920 10130 16 c00000027284a100 UN 0.1 48512 12608 sendmail 33092 32987 0 c000000205218b00 UN 0.1 48512 12608 sendmail 33154 4567 16 c000000260e51780 UN 0.1 48832 12864 pickup 33209 4241 36 c000000270cb6500 UN 0.1 18624 11712 sshd 33473 33283 0 c000000205211480 UN 0.1 48512 12672 sendmail 33531 4241 37 c00000023c902780 UN 0.1 18624 11648 sshd EEH handler hung while bnx2x sleeping and holding RTNL lock =========================================================== crash> bt 213 PID: 213 TASK: c000000004c89e00 CPU: 11 COMMAND: "eehd" #0 [c000000004d477e0] __schedule at c000000000c70808 #1 [c000000004d478b0] schedule at c000000000c70ee0 #2 [c000000004d478e0] schedule_timeout at c000000000c76dec #3 [c000000004d479c0] msleep at c0000000002120cc #4 [c000000004d479f0] napi_disable at c000000000a06448 ^^^^^^^^^^^^^^^^ #5 [c000000004d47a30] bnx2x_netif_stop at c0080000018dba94 [bnx2x] #6 [c000000004d47a60] bnx2x_io_slot_reset at c0080000018a551c [bnx2x] #7 [c000000004d47b20] eeh_report_reset at c00000000004c9bc #8 [c000000004d47b90] eeh_pe_report at c00000000004d1a8 #9 [c000000004d47c40] eeh_handle_normal_event at c00000000004da64 And the sleeping source code ============================ crash> dis -ls c000000000a06448 FILE: ../net/core/dev.c LINE: 6702 6697 { 6698 might_sleep(); 6699 set_bit(NAPI_STATE_DISABLE, &n->state); 6700 6701 while (test_and_set_bit(NAPI_STATE_SCHED, &n->state)) * 6702 msleep(1); 6703 while (test_and_set_bit(NAPI_STATE_NPSVC, &n->state)) 6704 msleep(1); 6705 6706 hrtimer_cancel(&n->timer); 6707 6708 clear_bit(NAPI_STATE_DISABLE, &n->state); 6709 } EEH calls into bnx2x twice based on the system log above, first through bnx2x_io_error_detected() and then bnx2x_io_slot_reset(), and executes the following call chains: bnx2x_io_error_detected() +-> bnx2x_eeh_nic_unload() +-> bnx2x_del_all_napi() +-> __netif_napi_del() bnx2x_io_slot_reset() +-> bnx2x_netif_stop() +-> bnx2x_napi_disable() +->napi_disable() Fix this by correcting the sequence of NAPI APIs usage, that is delete the NAPI after disabling it. Fixes: 7fa6f34081f1 ("bnx2x: AER revised") Reported-by: David Christensen <drc@linux.vnet.ibm.com> Tested-by: David Christensen <drc@linux.vnet.ibm.com> Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Link: https://lore.kernel.org/r/20220426153913.6966-1-manishc@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-09tls: Skip tls_append_frag on zero copy sizeMaxim Mikityanskiy1-5/+7
[ Upstream commit a0df71948e9548de819a6f1da68f5f1742258a52 ] Calling tls_append_frag when max_open_record_len == record->len might add an empty fragment to the TLS record if the call happens to be on the page boundary. Normally tls_append_frag coalesces the zero-sized fragment to the previous one, but not if it's on page boundary. If a resync happens then, the mlx5 driver posts dump WQEs in tx_post_resync_dump, and the empty fragment may become a data segment with byte_count == 0, which will confuse the NIC and lead to a CQE error. This commit fixes the described issue by skipping tls_append_frag on zero size to avoid adding empty fragments. The fix is not in the driver, because an empty fragment is hardly the desired behavior. Fixes: e8f69799810c ("net/tls: Add generic NIC offload infrastructure") Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20220426154949.159055-1-maximmi@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-09drm/amd/display: Fix memory leak in dcn21_clock_source_createMiaoqian Lin1-0/+1
[ Upstream commit 65e54987508b6f0771f56bdfa3ee1926d52785ae ] When dcn20_clk_src_construct() fails, we need to release clk_src. Fixes: 6f4e6361c3ff ("drm/amd/display: Add Renoir resource (v2)") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-09drm/amdkfd: Fix GWS queue countDavid Yat Sin1-46/+37
[ Upstream commit 7c6b6e18c890f30965b0589b0a57645e1dbccfde ] dqm->gws_queue_count and pdd->qpd.mapped_gws_queue need to be updated each time the queue gets evicted. Fixes: b8020b0304c8 ("drm/amdkfd: Enable over-subscription with >1 GWS queue") Signed-off-by: David Yat Sin <david.yatsin@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-09net: dsa: lantiq_gswip: Don't set GSWIP_MII_CFG_RMII_CLKMartin Blumenstingl1-3/+0
[ Upstream commit 71cffebf6358a7f5031f5b208bbdc1cb4db6e539 ] Commit 4b5923249b8fa4 ("net: dsa: lantiq_gswip: Configure all remaining GSWIP_MII_CFG bits") added all known bits in the GSWIP_MII_CFGp register. It helped bring this register into a well-defined state so the driver has to rely less on the bootloader to do things right. Unfortunately it also sets the GSWIP_MII_CFG_RMII_CLK bit without any possibility to configure it. Upon further testing it turns out that all boards which are supported by the GSWIP driver in OpenWrt which use an RMII PHY have a dedicated oscillator on the board which provides the 50MHz RMII reference clock. Don't set the GSWIP_MII_CFG_RMII_CLK bit (but keep the code which always clears it) to fix support for the Fritz!Box 7362 SL in OpenWrt. This is a board with two Atheros AR8030 RMII PHYs. With the "RMII clock" bit set the MAC also generates the RMII reference clock whose signal then conflicts with the signal from the oscillator on the board. This results in a constant cycle of the PHY detecting link up/down (and as a result of that: the two ports using the AR8030 PHYs are not working). At the time of writing this patch there's no known board where the MAC (GSWIP) has to generate the RMII reference clock. If needed this can be implemented in future by providing a device-tree flag so the GSWIP_MII_CFG_RMII_CLK bit can be toggled per port. Fixes: 4b5923249b8fa4 ("net: dsa: lantiq_gswip: Configure all remaining GSWIP_MII_CFG bits") Tested-by: Jan Hoffmann <jan@3e8.eu> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Link: https://lore.kernel.org/r/20220425152027.2220750-1-martin.blumenstingl@googlemail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-09net: phy: marvell10g: fix return value on errorBaruch Siach1-1/+1
[ Upstream commit 0ed9704b660b259b54743cad8a84a11148f60f0a ] Return back the error value that we get from phy_read_mmd(). Fixes: c84786fa8f91 ("net: phy: marvell10g: read copper results from CSSR1") Signed-off-by: Baruch Siach <baruch.siach@siklu.com> Reviewed-by: Marek Behún <kabel@kernel.org> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/f47cb031aeae873bb008ba35001607304a171a20.1650868058.git.baruch@tkos.co.il Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-09net: bcmgenet: hide status block before TX timestampingJonathan Lemon1-0/+7
[ Upstream commit acac0541d1d65e81e599ec399d34d184d2424401 ] The hardware checksum offloading requires use of a transmit status block inserted before the outgoing frame data, this was updated in '9a9ba2a4aaaa ("net: bcmgenet: always enable status blocks")' However, skb_tx_timestamp() assumes that it is passed a raw frame and PTP parsing chokes on this status block. Fix this by calling __skb_pull(), which hides the TSB before calling skb_tx_timestamp(), so an outgoing PTP packet is parsed correctly. As the data in the skb has already been set up for DMA, and the dma_unmap_* calls use a separately stored address, there is no no effective change in the data transmission. Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220424165307.591145-1-jonathan.lemon@gmail.com Fixes: d03825fba459 ("net: bcmgenet: add skb_tx_timestamp call") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-09clk: sunxi: sun9i-mmc: check return value after calling platform_get_resource()Yang Yingliang1-0/+2
[ Upstream commit f58ca215cda1975f77b2b762903684a3c101bec9 ] It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value. Fixes: 7a6fca879f59 ("clk: sunxi: Add driver for A80 MMC config clocks/resets") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220421134308.2885094-1-yangyingliang@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-09bus: sunxi-rsb: Fix the return value of sunxi_rsb_device_create()Christophe JAILLET1-0/+2
[ Upstream commit fff8c10368e64e7f8960f149375c12ca5f3b30af ] This code is really spurious. It always returns an ERR_PTR, even when err is known to be 0 and calls put_device() after a successful device_register() call. It is likely that the return statement in the normal path is missing. Add 'return rdev;' to fix it. Fixes: d787dcdb9c8f ("bus: sunxi-rsb: Add driver for Allwinner Reduced Serial Bus") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Samuel Holland <samuel@sholland.org> Tested-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/ef2b9576350bba4c8e05e669e9535e9e2a415763.1650551719.git.christophe.jaillet@wanadoo.fr Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-09tcp: make sure treq->af_specific is initializedEric Dumazet3-2/+10
[ Upstream commit ba5a4fdd63ae0c575707030db0b634b160baddd7 ] syzbot complained about a recent change in TCP stack, hitting a NULL pointer [1] tcp request sockets have an af_specific pointer, which was used before the blamed change only for SYNACK generation in non SYNCOOKIE mode. tcp requests sockets momentarily created when third packet coming from client in SYNCOOKIE mode were not using treq->af_specific. Make sure this field is populated, in the same way normal TCP requests sockets do in tcp_conn_request(). [1] TCP: request_sock_TCPv6: Possible SYN flooding on port 20002. Sending cookies. Check SNMP counters. general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 1 PID: 3695 Comm: syz-executor864 Not tainted 5.18.0-rc3-syzkaller-00224-g5fd1fe4807f9 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:tcp_create_openreq_child+0xe16/0x16b0 net/ipv4/tcp_minisocks.c:534 Code: 48 c1 ea 03 80 3c 02 00 0f 85 e5 07 00 00 4c 8b b3 28 01 00 00 48 b8 00 00 00 00 00 fc ff df 49 8d 7e 08 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 c9 07 00 00 48 8b 3c 24 48 89 de 41 ff 56 08 48 RSP: 0018:ffffc90000de0588 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffff888076490330 RCX: 0000000000000100 RDX: 0000000000000001 RSI: ffffffff87d67ff0 RDI: 0000000000000008 RBP: ffff88806ee1c7f8 R08: 0000000000000000 R09: 0000000000000000 R10: ffffffff87d67f00 R11: 0000000000000000 R12: ffff88806ee1bfc0 R13: ffff88801b0e0368 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f517fe58700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffcead76960 CR3: 000000006f97b000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> tcp_v6_syn_recv_sock+0x199/0x23b0 net/ipv6/tcp_ipv6.c:1267 tcp_get_cookie_sock+0xc9/0x850 net/ipv4/syncookies.c:207 cookie_v6_check+0x15c3/0x2340 net/ipv6/syncookies.c:258 tcp_v6_cookie_check net/ipv6/tcp_ipv6.c:1131 [inline] tcp_v6_do_rcv+0x1148/0x13b0 net/ipv6/tcp_ipv6.c:1486 tcp_v6_rcv+0x3305/0x3840 net/ipv6/tcp_ipv6.c:1725 ip6_protocol_deliver_rcu+0x2e9/0x1900 net/ipv6/ip6_input.c:422 ip6_input_finish+0x14c/0x2c0 net/ipv6/ip6_input.c:464 NF_HOOK include/linux/netfilter.h:307 [inline] NF_HOOK include/linux/netfilter.h:301 [inline] ip6_input+0x9c/0xd0 net/ipv6/ip6_input.c:473 dst_input include/net/dst.h:461 [inline] ip6_rcv_finish net/ipv6/ip6_input.c:76 [inline] NF_HOOK include/linux/netfilter.h:307 [inline] NF_HOOK include/linux/netfilter.h:301 [inline] ipv6_rcv+0x27f/0x3b0 net/ipv6/ip6_input.c:297 __netif_receive_skb_one_core+0x114/0x180 net/core/dev.c:5405 __netif_receive_skb+0x24/0x1b0 net/core/dev.c:5519 process_backlog+0x3a0/0x7c0 net/core/dev.c:5847 __napi_poll+0xb3/0x6e0 net/core/dev.c:6413 napi_poll net/core/dev.c:6480 [inline] net_rx_action+0x8ec/0xc60 net/core/dev.c:6567 __do_softirq+0x29b/0x9c2 kernel/softirq.c:558 invoke_softirq kernel/softirq.c:432 [inline] __irq_exit_rcu+0x123/0x180 kernel/softirq.c:637 irq_exit_rcu+0x5/0x20 kernel/softirq.c:649 sysvec_apic_timer_interrupt+0x93/0xc0 arch/x86/kernel/apic/apic.c:1097 Fixes: 5b0b9e4c2c89 ("tcp: md5: incorrect tcp_header_len for incoming connections") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Francesco Ruggeri <fruggeri@arista.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-09tcp: fix potential xmit stalls caused by TCP_NOTSENT_LOWATEric Dumazet3-1/+13
[ Upstream commit 4bfe744ff1644fbc0a991a2677dc874475dd6776 ] I had this bug sitting for too long in my pile, it is time to fix it. Thanks to Doug Porter for reminding me of it! We had various attempts in the past, including commit 0cbe6a8f089e ("tcp: remove SOCK_QUEUE_SHRUNK"), but the issue is that TCP stack currently only generates EPOLLOUT from input path, when tp->snd_una has advanced and skb(s) cleaned from rtx queue. If a flow has a big RTT, and/or receives SACKs, it is possible that the notsent part (tp->write_seq - tp->snd_nxt) reaches 0 and no more data can be sent until tp->snd_una finally advances. What is needed is to also check if POLLOUT needs to be generated whenever tp->snd_nxt is advanced, from output path. This bug triggers more often after an idle period, as we do not receive ACK for at least one RTT. tcp_notsent_lowat could be a fraction of what CWND and pacing rate would allow to send during this RTT. In a followup patch, I will remove the bogus call to tcp_chrono_stop(sk, TCP_CHRONO_SNDBUF_LIMITED) from tcp_check_space(). Fact that we have decided to generate an EPOLLOUT does not mean the application has immediately refilled the transmit queue. This optimistic call might have been the reason the bug seemed not too serious. Tested: 200 ms rtt, 1% packet loss, 32 MB tcp_rmem[2] and tcp_wmem[2] $ echo 500000 >/proc/sys/net/ipv4/tcp_notsent_lowat $ cat bench_rr.sh SUM=0 for i in {1..10} do V=`netperf -H remote_host -l30 -t TCP_RR -- -r 10000000,10000 -o LOCAL_BYTES_SENT | egrep -v "MIGRATED|Bytes"` echo $V SUM=$(($SUM + $V)) done echo SUM=$SUM Before patch: $ bench_rr.sh 130000000 80000000 140000000 140000000 140000000 140000000 130000000 40000000 90000000 110000000 SUM=1140000000 After patch: $ bench_rr.sh 430000000 590000000 530000000 450000000 450000000 350000000 450000000 490000000 480000000 460000000 SUM=4680000000 # This is 410 % of the value before patch. Fixes: c9bee3b7fdec ("tcp: TCP_NOTSENT_LOWAT socket option") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Doug Porter <dsp@fb.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Neal Cardwell <ncardwell@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-09ip_gre, ip6_gre: Fix race condition on o_seqno in collect_md modePeilin Ye4-8/+9
[ Upstream commit 31c417c948d7f6909cb63f0ac3298f3c38f8ce20 ] As pointed out by Jakub Kicinski, currently using TUNNEL_SEQ in collect_md mode is racy for [IP6]GRE[TAP] devices. Consider the following sequence of events: 1. An [IP6]GRE[TAP] device is created in collect_md mode using "ip link add ... external". "ip" ignores "[o]seq" if "external" is specified, so TUNNEL_SEQ is off, and the device is marked as NETIF_F_LLTX (i.e. it uses lockless TX); 2. Someone sets TUNNEL_SEQ on outgoing skb's, using e.g. bpf_skb_set_tunnel_key() in an eBPF program attached to this device; 3. gre_fb_xmit() or __gre6_xmit() processes these skb's: gre_build_header(skb, tun_hlen, flags, protocol, tunnel_id_to_key32(tun_info->key.tun_id), (flags & TUNNEL_SEQ) ? htonl(tunnel->o_seqno++) : 0); ^^^^^^^^^^^^^^^^^ Since we are not using the TX lock (&txq->_xmit_lock), multiple CPUs may try to do this tunnel->o_seqno++ in parallel, which is racy. Fix it by making o_seqno atomic_t. As mentioned by Eric Dumazet in commit b790e01aee74 ("ip_gre: lockless xmit"), making o_seqno atomic_t increases "chance for packets being out of order at receiver" when NETIF_F_LLTX is on. Maybe a better fix would be: 1. Do not ignore "oseq" in external mode. Users MUST specify "oseq" if they want the kernel to allow sequencing of outgoing packets; 2. Reject all outgoing TUNNEL_SEQ packets if the device was not created with "oseq". Unfortunately, that would break userspace. We could now make [IP6]GRE[TAP] devices always NETIF_F_LLTX, but let us do it in separate patches to keep this fix minimal. Suggested-by: Jakub Kicinski <kuba@kernel.org> Fixes: 77a5196a804e ("gre: add sequence number for collect md mode.") Signed-off-by: Peilin Ye <peilin.ye@bytedance.com> Acked-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-09ip6_gre: Make o_seqno start from 0 in native modePeilin Ye1-6/+5
[ Upstream commit fde98ae91f79cab4e020f40c35ed23cbdc59661c ] For IP6GRE and IP6GRETAP devices, currently o_seqno starts from 1 in native mode. According to RFC 2890 2.2., "The first datagram is sent with a sequence number of 0." Fix it. It is worth mentioning that o_seqno already starts from 0 in collect_md mode, see the "if (tunnel->parms.collect_md)" clause in __gre6_xmit(), where tunnel->o_seqno is passed to gre_build_header() before getting incremented. Fixes: c12b395a4664 ("gre: Support GRE over IPv6") Signed-off-by: Peilin Ye <peilin.ye@bytedance.com> Acked-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-09ip_gre: Make o_seqno start from 0 in native modePeilin Ye1-5/+3
[ Upstream commit ff827beb706ed719c766acf36449801ded0c17fc ] For GRE and GRETAP devices, currently o_seqno starts from 1 in native mode. According to RFC 2890 2.2., "The first datagram is sent with a sequence number of 0." Fix it. It is worth mentioning that o_seqno already starts from 0 in collect_md mode, see gre_fb_xmit(), where tunnel->o_seqno is passed to gre_build_header() before getting incremented. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Peilin Ye <peilin.ye@bytedance.com> Acked-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-09net/smc: sync err code when tcp connection was refusedliuyacan1-0/+2
[ Upstream commit 4e2e65e2e56c6ceb4ea1719360080c0af083229e ] In the current implementation, when TCP initiates a connection to an unavailable [ip,port], ECONNREFUSED will be stored in the TCP socket, but SMC will not. However, some apps (like curl) use getsockopt(,,SO_ERROR,,) to get the error information, which makes them miss the error message and behave strangely. Fixes: 50717a37db03 ("net/smc: nonblocking connect rework") Signed-off-by: liuyacan <liuyacan@corp.netease.com> Reviewed-by: Tony Lu <tonylu@linux.alibaba.com> Acked-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-09net: hns3: add return value for mailbox handling in PFJian Shen1-10/+12
[ Upstream commit c59d606296842409a6e5a4828235b0bd46b12bc4 ] Currently, there are some querying mailboxes sent from VF to PF, and VF will wait the PF's handling result. For mailbox HCLGE_MBX_GET_QID_IN_PF and HCLGE_MBX_GET_RSS_KEY, it may fail when the input parameter is invalid, but the prototype of their handler function is void. In this case, PF always return success to VF, which may cause the VF get incorrect result. Fixes it by adding return value for these function. Fixes: 63b1279d9905 ("net: hns3: check queue id range before using") Fixes: 532cfc0df1e4 ("net: hns3: add a check for index in hclge_get_rss_key()") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-09net: hns3: add validity check for message data lengthJian Shen1-0/+7
[ Upstream commit 7d413735cb18ff73aaba3457b16b08332e8d3cc4 ] Add validity check for message data length in function hclge_send_mbx_msg(), avoid unexpected overflow. Fixes: dde1a86e93ca ("net: hns3: Add mailbox support to PF driver") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-09net: hns3: modify the return code of hclge_get_ring_chain_from_mbxJie Wang1-1/+1
[ Upstream commit 48009e9972974c52a5f649f761862dd67bce3d13 ] Currently, function hclge_get_ring_chain_from_mbx will return -ENOMEM if ring_num is bigger than HCLGE_MBX_MAX_RING_CHAIN_PARAM_NUM. It is better to return -EINVAL for the invalid parameter case. So this patch fixes it by return -EINVAL in this abnormal branch. Fixes: 5d02a58dae60 ("net: hns3: fix for buffer overflow smatch warning") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-09cpufreq: fix memory leak in sun50i_cpufreq_nvmem_probeXiaobing Luo1-1/+3
[ Upstream commit 1aa24a8f3b5133dae4bc1e57427e345445f3e902 ] -------------------------------------------- unreferenced object 0xffff000010742a00 (size 128): comm "swapper/0", pid 1, jiffies 4294902015 (age 1187.652s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000b4dfebaa>] __kmalloc+0x338/0x474 [<00000000d6e716db>] sun50i_cpufreq_nvmem_probe+0xc4/0x36c [<000000007d6082a0>] platform_probe+0x98/0x11c [<00000000c990f549>] really_probe+0x234/0x5a0 [<000000002d9fecc6>] __driver_probe_device+0x194/0x224 [<00000000cf0b94fa>] driver_probe_device+0x64/0x13c [<00000000f238e4cf>] __device_attach_driver+0xf8/0x180 [<000000006720e418>] bus_for_each_drv+0xf8/0x160 [<00000000df4f14f6>] __device_attach+0x174/0x29c [<00000000782002fb>] device_initial_probe+0x20/0x30 [<00000000c2681b06>] bus_probe_device+0xfc/0x110 [<00000000964cf3bd>] device_add+0x5f0/0xcd0 [<000000004b9264e3>] platform_device_add+0x198/0x390 [<00000000fa82a9d0>] platform_device_register_full+0x178/0x210 [<000000009a5daf13>] sun50i_cpufreq_init+0xf8/0x168 [<000000000377cc7c>] do_one_initcall+0xe4/0x570 -------------------------------------------- if sun50i_cpufreq_get_efuse failed, then opp_tables leak. Fixes: f328584f7bff ("cpufreq: Add sun50i nvmem based CPU scaling driver") Signed-off-by: Xiaobing Luo <luoxiaobing0926@gmail.com> Reviewed-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-09pinctrl: pistachio: fix use of irq_of_parse_and_map()Lv Ruyi1-3/+3
[ Upstream commit 0c9843a74a85224a89daa81fa66891dae2f930e1 ] The irq_of_parse_and_map() function returns 0 on failure, and does not return an negative value. Fixes: cefc03e5995e ("pinctrl: Add Pistachio SoC pin control driver") Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn> Link: https://lore.kernel.org/r/20220424031430.3170759-1-lv.ruyi@zte.com.cn Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-09arm64: dts: imx8mn-ddr4-evk: Describe the 32.768 kHz PMIC clockFabio Estevam1-0/+4
[ Upstream commit 0310b5aa0656a94102344f1e9ae2892e342a665d ] The ROHM BD71847 PMIC has a 32.768 kHz clock. Describe the PMIC clock to fix the following boot errors: bd718xx-clk bd71847-clk.1.auto: No parent clk found bd718xx-clk: probe of bd71847-clk.1.auto failed with error -22 Based on the same fix done for imx8mm-evk as per commit a6a355ede574 ("arm64: dts: imx8mm-evk: Add 32.768 kHz clock to PMIC") Fixes: 3e44dd09736d ("arm64: dts: imx8mn-ddr4-evk: Add rohm,bd71847 PMIC support") Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-09ARM: dts: imx6ull-colibri: fix vqmmc regulatorMax Krummenacher1-1/+1
[ Upstream commit 45974e4276a8d6653394f66666fc57d8ffa6de9a ] The correct spelling for the property is gpios. Otherwise, the regulator will neither reserve nor control any GPIOs. Thus, any SD/MMC card which can use UHS-I modes will fail. Fixes: c2e4987e0e02 ("ARM: dts: imx6ull: add Toradex Colibri iMX6ULL support") Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Denys Drozdov <denys.drozdov@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-09sctp: check asoc strreset_chunk in sctp_generate_reconf_eventXin Long1-0/+4
[ Upstream commit 165e3e17fe8fe6a8aab319bc6e631a2e23b9a857 ] A null pointer reference issue can be triggered when the response of a stream reconf request arrives after the timer is triggered, such as: send Incoming SSN Reset Request ---> CPU0: reconf timer is triggered, go to the handler code before hold sk lock <--- reply with Outgoing SSN Reset Request CPU1: process Outgoing SSN Reset Request, and set asoc->strreset_chunk to NULL CPU0: continue the handler code, hold sk lock, and try to hold asoc->strreset_chunk, crash! In Ying Xu's testing, the call trace is: [ ] BUG: kernel NULL pointer dereference, address: 0000000000000010 [ ] RIP: 0010:sctp_chunk_hold+0xe/0x40 [sctp] [ ] Call Trace: [ ] <IRQ> [ ] sctp_sf_send_reconf+0x2c/0x100 [sctp] [ ] sctp_do_sm+0xa4/0x220 [sctp] [ ] sctp_generate_reconf_event+0xbd/0xe0 [sctp] [ ] call_timer_fn+0x26/0x130 This patch is to fix it by returning from the timer handler if asoc strreset_chunk is already set to NULL. Fixes: 7b9438de0cd4 ("sctp: add stream reconf timer") Reported-by: Ying Xu <yinxu@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-09wireguard: device: check for metadata_dst with skb_valid_dst()Nikolay Aleksandrov1-1/+2
[ Upstream commit 45ac774c33d834fe9d4de06ab5f1022fe8cd2071 ] When we try to transmit an skb with md_dst attached through wireguard we hit a null pointer dereference in wg_xmit() due to the use of dst_mtu() which calls into dst_blackhole_mtu() which in turn tries to dereference dst->dev. Since wireguard doesn't use md_dsts we should use skb_valid_dst(), which checks for DST_METADATA flag, and if it's set, then falls back to wireguard's device mtu. That gives us the best chance of transmitting the packet; otherwise if the blackhole netdev is used we'd get ETH_MIN_MTU. [ 263.693506] BUG: kernel NULL pointer dereference, address: 00000000000000e0 [ 263.693908] #PF: supervisor read access in kernel mode [ 263.694174] #PF: error_code(0x0000) - not-present page [ 263.694424] PGD 0 P4D 0 [ 263.694653] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 263.694876] CPU: 5 PID: 951 Comm: mausezahn Kdump: loaded Not tainted 5.18.0-rc1+ #522 [ 263.695190] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1.fc35 04/01/2014 [ 263.695529] RIP: 0010:dst_blackhole_mtu+0x17/0x20 [ 263.695770] Code: 00 00 00 0f 1f 44 00 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 8b 47 10 48 83 e0 fc 8b 40 04 85 c0 75 09 48 8b 07 <8b> 80 e0 00 00 00 c3 66 90 0f 1f 44 00 00 48 89 d7 be 01 00 00 00 [ 263.696339] RSP: 0018:ffffa4a4422fbb28 EFLAGS: 00010246 [ 263.696600] RAX: 0000000000000000 RBX: ffff8ac9c3553000 RCX: 0000000000000000 [ 263.696891] RDX: 0000000000000401 RSI: 00000000fffffe01 RDI: ffffc4a43fb48900 [ 263.697178] RBP: ffffa4a4422fbb90 R08: ffffffff9622635e R09: 0000000000000002 [ 263.697469] R10: ffffffff9b69a6c0 R11: ffffa4a4422fbd0c R12: ffff8ac9d18b1a00 [ 263.697766] R13: ffff8ac9d0ce1840 R14: ffff8ac9d18b1a00 R15: ffff8ac9c3553000 [ 263.698054] FS: 00007f3704c337c0(0000) GS:ffff8acaebf40000(0000) knlGS:0000000000000000 [ 263.698470] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 263.698826] CR2: 00000000000000e0 CR3: 0000000117a5c000 CR4: 00000000000006e0 [ 263.699214] Call Trace: [ 263.699505] <TASK> [ 263.699759] wg_xmit+0x411/0x450 [ 263.700059] ? bpf_skb_set_tunnel_key+0x46/0x2d0 [ 263.700382] ? dev_queue_xmit_nit+0x31/0x2b0 [ 263.700719] dev_hard_start_xmit+0xd9/0x220 [ 263.701047] __dev_queue_xmit+0x8b9/0xd30 [ 263.701344] __bpf_redirect+0x1a4/0x380 [ 263.701664] __dev_queue_xmit+0x83b/0xd30 [ 263.701961] ? packet_parse_headers+0xb4/0xf0 [ 263.702275] packet_sendmsg+0x9a8/0x16a0 [ 263.702596] ? _raw_spin_unlock_irqrestore+0x23/0x40 [ 263.702933] sock_sendmsg+0x5e/0x60 [ 263.703239] __sys_sendto+0xf0/0x160 [ 263.703549] __x64_sys_sendto+0x20/0x30 [ 263.703853] do_syscall_64+0x3b/0x90 [ 263.704162] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 263.704494] RIP: 0033:0x7f3704d50506 [ 263.704789] Code: 48 c7 c0 ff ff ff ff eb b7 66 2e 0f 1f 84 00 00 00 00 00 90 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 11 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 72 c3 90 55 48 83 ec 30 44 89 4c 24 2c 4c 89 [ 263.705652] RSP: 002b:00007ffe954b0b88 EFLAGS: 00000246 ORIG_RAX: 000000000000002c [ 263.706141] RAX: ffffffffffffffda RBX: 0000558bb259b490 RCX: 00007f3704d50506 [ 263.706544] RDX: 000000000000004a RSI: 0000558bb259b7b2 RDI: 0000000000000003 [ 263.706952] RBP: 0000000000000000 R08: 00007ffe954b0b90 R09: 0000000000000014 [ 263.707339] R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffe954b0b90 [ 263.707735] R13: 000000000000004a R14: 0000558bb259b7b2 R15: 0000000000000001 [ 263.708132] </TASK> [ 263.708398] Modules linked in: bridge netconsole bonding [last unloaded: bridge] [ 263.708942] CR2: 00000000000000e0 Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Link: https://github.com/cilium/cilium/issues/19428 Reported-by: Martynas Pumputis <m@lambda.lt> Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-09tcp: ensure to use the most recently sent skb when filling the rate samplePengcheng Yang2-3/+14
[ Upstream commit b253a0680ceadc5d7b4acca7aa2d870326cad8ad ] If an ACK (s)acks multiple skbs, we favor the information from the most recently sent skb by choosing the skb with the highest prior_delivered count. But in the interval between receiving ACKs, we send multiple skbs with the same prior_delivered, because the tp->delivered only changes when we receive an ACK. We used RACK's solution, copying tcp_rack_sent_after() as tcp_skb_sent_after() helper to determine "which packet was sent last?". Later, we will use tcp_skb_sent_after() instead in RACK. Fixes: b9f64820fb22 ("tcp: track data delivery rate for a TCP connection") Signed-off-by: Pengcheng Yang <yangpc@wangsu.com> Cc: Paolo Abeni <pabeni@redhat.com> Acked-by: Neal Cardwell <ncardwell@google.com> Tested-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/1650422081-22153-1-git-send-email-yangpc@wangsu.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-09pinctrl: stm32: Keep pinctrl block clock enabled when LEVEL IRQ requestedMarek Vasut1-2/+17
[ Upstream commit 05d8af449d93e04547b4c6b328e39c890bc803f4 ] The current EOI handler for LEVEL triggered interrupts calls clk_enable(), register IO, clk_disable(). The clock manipulation requires locking which happens with IRQs disabled in clk_enable_lock(). Instead of turning the clock on and off all the time, enable the clock in case LEVEL interrupt is requested and keep the clock enabled until all LEVEL interrupts are freed. The LEVEL interrupts are an exception on this platform and seldom used, so this does not affect the common case. This simplifies the LEVEL interrupt handling considerably and also fixes the following splat found when using preempt-rt: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at kernel/locking/rtmutex.c:2040 __rt_mutex_trylock+0x37/0x62 Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.109-rt65-stable-standard-00068-g6a5afc4b1217 #85 Hardware name: STM32 (Device Tree Support) [<c010a45d>] (unwind_backtrace) from [<c010766f>] (show_stack+0xb/0xc) [<c010766f>] (show_stack) from [<c06353ab>] (dump_stack+0x6f/0x84) [<c06353ab>] (dump_stack) from [<c01145e3>] (__warn+0x7f/0xa4) [<c01145e3>] (__warn) from [<c063386f>] (warn_slowpath_fmt+0x3b/0x74) [<c063386f>] (warn_slowpath_fmt) from [<c063b43d>] (__rt_mutex_trylock+0x37/0x62) [<c063b43d>] (__rt_mutex_trylock) from [<c063c053>] (rt_spin_trylock+0x7/0x16) [<c063c053>] (rt_spin_trylock) from [<c036a2f3>] (clk_enable_lock+0xb/0x80) [<c036a2f3>] (clk_enable_lock) from [<c0