summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-03-30net: phylink: Fix phylink_err() function name error in phylink_major_configOng Boon Leong1-1/+1
[ Upstream commit d82c6c1aaccd2877b6082cebcb1746a13648a16d ] if pl->mac_ops->mac_finish() failed, phylink_err should use "mac_finish" instead of "mac_prepare". Fixes: b7ad14c2fe2d4 ("net: phylink: re-implement interface configuration with PCS") Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-30net: hdlc_x25: Prevent racing between "x25_close" and "x25_xmit"/"x25_rx"Xie He1-1/+41
[ Upstream commit bf0ffea336b493c0a8c8bc27b46683ecf1e8f294 ] "x25_close" is called by "hdlc_close" in "hdlc.c", which is called by hardware drivers' "ndo_stop" function. "x25_xmit" is called by "hdlc_start_xmit" in "hdlc.c", which is hardware drivers' "ndo_start_xmit" function. "x25_rx" is called by "hdlc_rcv" in "hdlc.c", which receives HDLC frames from "net/core/dev.c". "x25_close" races with "x25_xmit" and "x25_rx" because their callers race. However, we need to ensure that the LAPB APIs called in "x25_xmit" and "x25_rx" are called before "lapb_unregister" is called in "x25_close". This patch adds locking to ensure when "x25_xmit" and "x25_rx" are doing their work, "lapb_unregister" is not yet called in "x25_close". Reasons for not solving the racing between "x25_close" and "x25_xmit" by calling "netif_tx_disable" in "x25_close": 1. We still need to solve the racing between "x25_close" and "x25_rx"; 2. The design of the HDLC subsystem assumes the HDLC hardware drivers have full control over the TX queue, and the HDLC protocol drivers (like this driver) have no control. Controlling the queue here in the protocol driver may interfere with hardware drivers' control of the queue. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Xie He <xie.he.0141@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-30netfilter: ctnetlink: fix dump of the expect mask attributeFlorian Westphal1-0/+1
[ Upstream commit b58f33d49e426dc66e98ed73afb5d97b15a25f2d ] Before this change, the mask is never included in the netlink message, so "conntrack -E expect" always prints 0.0.0.0. In older kernels the l3num callback struct was passed as argument, based on tuple->src.l3num. After the l3num indirection got removed, the call chain is based on m.src.l3num, but this value is 0xffff. Init l3num to the correct value. Fixes: f957be9d349a3 ("netfilter: conntrack: remove ctnetlink callbacks from l3 protocol trackers") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-30selftests/bpf: Set gopt opt_class to 0 if get tunnel opt failedHangbin Liu1-4/+2
[ Upstream commit 31254dc9566221429d2cfb45fd5737985d70f2b6 ] When fixing the bpf test_tunnel.sh geneve failure. I only fixed the IPv4 part but forgot the IPv6 issue. Similar with the IPv4 fixes 557c223b643a ("selftests/bpf: No need to drop the packet when there is no geneve opt"), when there is no tunnel option and bpf_skb_get_tunnel_opt() returns error, there is no need to drop the packets and break all geneve rx traffic. Just set opt_class to 0 and keep returning TC_ACT_OK at the end. Fixes: 557c223b643a ("selftests/bpf: No need to drop the packet when there is no geneve opt") Fixes: 933a741e3b82 ("selftests/bpf: bpf tunnel test.") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: William Tu <u9012063@gmail.com> Link: https://lore.kernel.org/bpf/20210309032214.2112438-1-liuhangbin@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-30flow_dissector: fix byteorder of dissected ICMP IDAlexander Lobakin1-1/+1
[ Upstream commit a25f822285420486f5da434efc8d940d42a83bce ] flow_dissector_key_icmp::id is of type u16 (CPU byteorder), ICMP header has its ID field in network byteorder obviously. Sparse says: net/core/flow_dissector.c:178:43: warning: restricted __be16 degrades to integer Convert ID value to CPU byteorder when storing it into flow_dissector_key_icmp. Fixes: 5dec597e5cd0 ("flow_dissector: extract more ICMP information") Signed-off-by: Alexander Lobakin <alobakin@pm.me> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-30net: qrtr: fix a kernel-infoleak in qrtr_recvmsg()Eric Dumazet1-0/+5
[ Upstream commit 50535249f624d0072cd885bcdce4e4b6fb770160 ] struct sockaddr_qrtr has a 2-byte hole, and qrtr_recvmsg() currently does not clear it before copying kernel data to user space. It might be too late to name the hole since sockaddr_qrtr structure is uapi. BUG: KMSAN: kernel-infoleak in kmsan_copy_to_user+0x9c/0xb0 mm/kmsan/kmsan_hooks.c:249 CPU: 0 PID: 29705 Comm: syz-executor.3 Not tainted 5.11.0-rc7-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:79 [inline] dump_stack+0x21c/0x280 lib/dump_stack.c:120 kmsan_report+0xfb/0x1e0 mm/kmsan/kmsan_report.c:118 kmsan_internal_check_memory+0x202/0x520 mm/kmsan/kmsan.c:402 kmsan_copy_to_user+0x9c/0xb0 mm/kmsan/kmsan_hooks.c:249 instrument_copy_to_user include/linux/instrumented.h:121 [inline] _copy_to_user+0x1ac/0x270 lib/usercopy.c:33 copy_to_user include/linux/uaccess.h:209 [inline] move_addr_to_user+0x3a2/0x640 net/socket.c:237 ____sys_recvmsg+0x696/0xd50 net/socket.c:2575 ___sys_recvmsg net/socket.c:2610 [inline] do_recvmmsg+0xa97/0x22d0 net/socket.c:2710 __sys_recvmmsg net/socket.c:2789 [inline] __do_sys_recvmmsg net/socket.c:2812 [inline] __se_sys_recvmmsg+0x24a/0x410 net/socket.c:2805 __x64_sys_recvmmsg+0x62/0x80 net/socket.c:2805 do_syscall_64+0x9f/0x140 arch/x86/entry/common.c:48 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x465f69 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f43659d6188 EFLAGS: 00000246 ORIG_RAX: 000000000000012b RAX: ffffffffffffffda RBX: 000000000056bf60 RCX: 0000000000465f69 RDX: 0000000000000008 RSI: 0000000020003e40 RDI: 0000000000000003 RBP: 00000000004bfa8f R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000010060 R11: 0000000000000246 R12: 000000000056bf60 R13: 0000000000a9fb1f R14: 00007f43659d6300 R15: 0000000000022000 Local variable ----addr@____sys_recvmsg created at: ____sys_recvmsg+0x168/0xd50 net/socket.c:2550 ____sys_recvmsg+0x168/0xd50 net/socket.c:2550 Bytes 2-3 of 12 are uninitialized Memory access of size 12 starts at ffff88817c627b40 Data copied to user address 0000000020000140 Fixes: bdabad3e363d ("net: Add Qualcomm IPC router") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Courtney Cavin <courtney.cavin@sonymobile.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-30net: ipa: terminate message handler arraysAlex Elder1-0/+2
[ Upstream commit 3a9ef3e11c5d33e5cb355b4aad1a4caad2407541 ] When a QMI handle is initialized, an array of message handler structures is provided, defining how any received message should be handled based on its type and message ID. The QMI core code traverses this array when a message arrives and calls the function associated with the (type, msg_id) found in the array. The array is supposed to be terminated with an empty (all zero) entry though. Without it, an unsupported message will cause the QMI core code to go past the end of the array. Fix this bug, by properly terminating the message handler arrays provided when QMI handles are set up by the IPA driver. Fixes: 530f9216a9537 ("soc: qcom: ipa: AP/modem communications") Reported-by: Sujit Kautkar <sujitka@chromium.org> Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-30clk: qcom: gcc-sc7180: Use floor ops for the correct sdcc1 clkDouglas Anderson1-2/+2
[ Upstream commit 148ddaa89d4a0a927c4353398096cc33687755c1 ] While picking commit a8cd989e1a57 ("mmc: sdhci-msm: Warn about overclocking SD/MMC") back to my tree I was surprised that it was reporting warnings. I thought I fixed those! Looking closer at the fix, I see that I totally bungled it (or at least I halfway bungled it). The SD card clock got fixed (and that was the one I was really focused on fixing), but I totally adjusted the wrong clock for eMMC. Sigh. Let's fix my dumb mistake. Now both SD and eMMC have floor for the "apps" clock. This doesn't matter a lot for the final clock rate for HS400 eMMC but could matter if someone happens to put some slower eMMC on a sc7180. We also transition through some of these lower rates sometimes and having them wrong could cause problems during these transitions. These were the messages I was seeing at boot: mmc1: Card appears overclocked; req 52000000 Hz, actual 100000000 Hz mmc1: Card appears overclocked; req 52000000 Hz, actual 100000000 Hz mmc1: Card appears overclocked; req 104000000 Hz, actual 192000000 Hz Fixes: 6d37a8d19283 ("clk: qcom: gcc-sc7180: Use floor ops for sdcc clks") Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20210224095013.1.I2e2ba4978cfca06520dfb5d757768f9c42140f7c@changeid Reviewed-by: Taniya Das <tdas@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-30ftgmac100: Restart MAC HW onceDylan Hung1-0/+1
[ Upstream commit 6897087323a2fde46df32917462750c069668b2f ] The interrupt handler may set the flag to reset the mac in the future, but that flag is not cleared once the reset has occurred. Fixes: 10cbd6407609 ("ftgmac100: Rework NAPI & interrupts handling") Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-30net: phy: broadcom: Add power down exit reset state delayFlorian Fainelli1-0/+5
[ Upstream commit 7a1468ba0e02eee24ae1353e8933793a27198e20 ] Per the datasheet, when we clear the power down bit, the PHY remains in an internal reset state for 40us and then resume normal operation. Account for that delay to avoid any issues in the future if genphy_resume() changes. Fixes: fe26821fa614 ("net: phy: broadcom: Wire suspend/resume for BCM54810") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-30net/qlcnic: Fix a use after free in qlcnic_83xx_get_minidump_templateLv Yunlong1-0/+3
[ Upstream commit db74623a3850db99cb9692fda9e836a56b74198d ] In qlcnic_83xx_get_minidump_template, fw_dump->tmpl_hdr was freed by vfree(). But unfortunately, it is used when extended is true. Fixes: 7061b2bdd620e ("qlogic: Deletion of unnecessary checks before two function calls") Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-30e1000e: Fix error handling in e1000_set_d0_lplu_state_82571Dinghao Liu1-0/+2
[ Upstream commit b52912b8293f2c496f42583e65599aee606a0c18 ] There is one e1e_wphy() call in e1000_set_d0_lplu_state_82571 that we have caught its return value but lack further handling. Check and terminate the execution flow just like other e1e_wphy() in this function. Fixes: bc7f75fa9788 ("[E1000E]: New pci-express e1000 driver (currently for ICH9 devices only)") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Acked-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-30e1000e: add rtnl_lock() to e1000_reset_taskVitaly Lifshits1-1/+5
[ Upstream commit 21f857f0321d0d0ea9b1a758bd55dc63d1cb2437 ] A possible race condition was found in e1000_reset_task, after discovering a similar issue in igb driver via commit 024a8168b749 ("igb: reinit_locked() should be called with rtnl_lock"). Added rtnl_lock() and rtnl_unlock() to avoid this. Fixes: bc7f75fa9788 ("[E1000E]: New pci-express e1000 driver (currently for ICH9 devices only)") Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-30igc: Fix igc_ptp_rx_pktstamp()Andre Guedes2-33/+41
[ Upstream commit fc9e5020971d57d7d0b3fef9e2ab2108fcb5588b ] The comment describing the timestamps layout in the packet buffer is wrong and the code is actually retrieving the timestamp in Timer 1 reference instead of Timer 0. This hasn't been a big issue so far because hardware is configured to report both timestamps using Timer 0 (see IGC_SRRCTL register configuration in igc_ptp_enable_rx_timestamp() helper). This patch fixes the comment and the code so we retrieve the timestamp in Timer 0 reference as expected. This patch also takes the opportunity to get rid of the hw.mac.type check since it is not required. Fixes: 81b055205e8ba ("igc: Add support for RX timestamping") Signed-off-by: Andre Guedes <andre.guedes@intel.com> Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: Jithu Joseph <jithu.joseph@intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-30igc: Fix Supported Pause Frame Link SettingMuhammad Husaini Zulkifli1-0/+3
[ Upstream commit 9a4a1cdc5ab52118c1f2b216f4240830b6528d32 ] The Supported Pause Frame always display "No" even though the Advertised pause frame showing the correct setting based on the pause parameters via ethtool. Set bit in link_ksettings to "Supported" for Pause Frame. Before output: Supported pause frame use: No Expected output: Supported pause frame use: Symmetric Fixes: 8c5ad0dae93c ("igc: Add ethtool support") Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Reviewed-by: Malli C <mallikarjuna.chilakala@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Acked-by: Sasha Neftin <sasha.neftin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-30igc: Fix Pause Frame AdvertisingMuhammad Husaini Zulkifli1-3/+1
[ Upstream commit 8876529465c368beafd51a70f79d7a738f2aadf4 ] Fix Pause Frame Advertising when getting the advertisement via ethtool. Remove setting the "advertising" bit in link_ksettings during default case when Tx and Rx are in off state with Auto Negotiate off. Below is the original output of advertisement link during Tx and Rx off: Advertised pause frame use: Symmetric Receive-only Expected output: Advertised pause frame use: No Fixes: 8c5ad0dae93c ("igc: Add ethtool support") Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Reviewed-by: Malli C <mallikarjuna.chilakala@intel.com> Acked-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-30igc: reinit_locked() should be called with rtnl_lockSasha Neftin1-0/+9
[ Upstream commit 6da262378c99b17b1a1ac2e42aa65acc1bd471c7 ] This commit applies to the igc_reset_task the same changes that were applied to the igb driver in commit 024a8168b749 ("igb: reinit_locked() should be called with rtnl_lock") and fix possible race in reset subtask. Fixes: 0507ef8a0372 ("igc: Add transmit and receive fastpath and interrupt handlers") Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-30net: dsa: bcm_sf2: Qualify phydev->dev_flags based on portFlorian Fainelli1-2/+4
[ Upstream commit 47142ed6c34d544ae9f0463e58d482289cbe0d46 ] Similar to commit 92696286f3bb37ba50e4bd8d1beb24afb759a799 ("net: bcmgenet: Set phydev->dev_flags only for internal PHYs") we need to qualify the phydev->dev_flags based on whether the port is connected to an internal or external PHY otherwise we risk having a flags collision with a completely different interpretation depending on the driver. Fixes: aa9aef77c761 ("net: dsa: bcm_sf2: communicate integrated PHY revision to PHY driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-30net: sched: validate stab valuesEric Dumazet5-8/+20
[ Upstream commit e323d865b36134e8c5c82c834df89109a5c60dab ] iproute2 package is well behaved, but malicious user space can provide illegal shift values and trigger UBSAN reports. Add stab parameter to red_check_params() to validate user input. syzbot reported: UBSAN: shift-out-of-bounds in ./include/net/red.h:312:18 shift exponent 111 is too large for 64-bit type 'long unsigned int' CPU: 1 PID: 14662 Comm: syz-executor.3 Not tainted 5.12.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:79 [inline] dump_stack+0x141/0x1d7 lib/dump_stack.c:120 ubsan_epilogue+0xb/0x5a lib/ubsan.c:148 __ubsan_handle_shift_out_of_bounds.cold+0xb1/0x181 lib/ubsan.c:327 red_calc_qavg_from_idle_time include/net/red.h:312 [inline] red_calc_qavg include/net/red.h:353 [inline] choke_enqueue.cold+0x18/0x3dd net/sched/sch_choke.c:221 __dev_xmit_skb net/core/dev.c:3837 [inline] __dev_queue_xmit+0x1943/0x2e00 net/core/dev.c:4150 neigh_hh_output include/net/neighbour.h:499 [inline] neigh_output include/net/neighbour.h:508 [inline] ip6_finish_output2+0x911/0x1700 net/ipv6/ip6_output.c:117 __ip6_finish_output net/ipv6/ip6_output.c:182 [inline] __ip6_finish_output+0x4c1/0xe10 net/ipv6/ip6_output.c:161 ip6_finish_output+0x35/0x200 net/ipv6/ip6_output.c:192 NF_HOOK_COND include/linux/netfilter.h:290 [inline] ip6_output+0x1e4/0x530 net/ipv6/ip6_output.c:215 dst_output include/net/dst.h:448 [inline] NF_HOOK include/linux/netfilter.h:301 [inline] NF_HOOK include/linux/netfilter.h:295 [inline] ip6_xmit+0x127e/0x1eb0 net/ipv6/ip6_output.c:320 inet6_csk_xmit+0x358/0x630 net/ipv6/inet6_connection_sock.c:135 dccp_transmit_skb+0x973/0x12c0 net/dccp/output.c:138 dccp_send_reset+0x21b/0x2b0 net/dccp/output.c:535 dccp_finish_passive_close net/dccp/proto.c:123 [inline] dccp_finish_passive_close+0xed/0x140 net/dccp/proto.c:118 dccp_terminate_connection net/dccp/proto.c:958 [inline] dccp_close+0xb3c/0xe60 net/dccp/proto.c:1028 inet_release+0x12e/0x280 net/ipv4/af_inet.c:431 inet6_release+0x4c/0x70 net/ipv6/af_inet6.c:478 __sock_release+0xcd/0x280 net/socket.c:599 sock_close+0x18/0x20 net/socket.c:1258 __fput+0x288/0x920 fs/file_table.c:280 task_work_run+0xdd/0x1a0 kernel/task_work.c:140 tracehook_notify_resume include/linux/tracehook.h:189 [inline] Fixes: 8afa10cbe281 ("net_sched: red: Avoid illegal values") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-30macvlan: macvlan_count_rx() needs to be aware of preemptionEric Dumazet1-1/+2
[ Upstream commit dd4fa1dae9f4847cc1fd78ca468ad69e16e5db3e ] macvlan_count_rx() can be called from process context, it is thus necessary to disable preemption before calling u64_stats_update_begin() syzbot was able to spot this on 32bit arch: WARNING: CPU: 1 PID: 4632 at include/linux/seqlock.h:271 __seqprop_assert include/linux/seqlock.h:271 [inline] WARNING: CPU: 1 PID: 4632 at include/linux/seqlock.h:271 __seqprop_assert.constprop.0+0xf0/0x11c include/linux/seqlock.h:269 Modules linked in: Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 4632 Comm: kworker/1:3 Not tainted 5.12.0-rc2-syzkaller #0 Hardware name: ARM-Versatile Express Workqueue: events macvlan_process_broadcast Backtrace: [<82740468>] (dump_backtrace) from [<827406dc>] (show_stack+0x18/0x1c arch/arm/kernel/traps.c:252) r7:00000080 r6:60000093 r5:00000000 r4:8422a3c4 [<827406c4>] (show_stack) from [<82751b58>] (__dump_stack lib/dump_stack.c:79 [inline]) [<827406c4>] (show_stack) from [<82751b58>] (dump_stack+0xb8/0xe8 lib/dump_stack.c:120) [<82751aa0>] (dump_stack) from [<82741270>] (panic+0x130/0x378 kernel/panic.c:231) r7:830209b4 r6:84069ea4 r5:00000000 r4:844350d0 [<82741140>] (panic) from [<80244924>] (__warn+0xb0/0x164 kernel/panic.c:605) r3:8404ec8c r2:00000000 r1:00000000 r0:830209b4 r7:0000010f [<80244874>] (__warn) from [<82741520>] (warn_slowpath_fmt+0x68/0xd4 kernel/panic.c:628) r7:81363f70 r6:0000010f r5:83018e50 r4:00000000 [<827414bc>] (warn_slowpath_fmt) from [<81363f70>] (__seqprop_assert include/linux/seqlock.h:271 [inline]) [<827414bc>] (warn_slowpath_fmt) from [<81363f70>] (__seqprop_assert.constprop.0+0xf0/0x11c include/linux/seqlock.h:269) r8:5a109000 r7:0000000f r6:a568dac0 r5:89802300 r4:00000001 [<81363e80>] (__seqprop_assert.constprop.0) from [<81364af0>] (u64_stats_update_begin include/linux/u64_stats_sync.h:128 [inline]) [<81363e80>] (__seqprop_assert.constprop.0) from [<81364af0>] (macvlan_count_rx include/linux/if_macvlan.h:47 [inline]) [<81363e80>] (__seqprop_assert.constprop.0) from [<81364af0>] (macvlan_broadcast+0x154/0x26c drivers/net/macvlan.c:291) r5:89802300 r4:8a927740 [<8136499c>] (macvlan_broadcast) from [<81365020>] (macvlan_process_broadcast+0x258/0x2d0 drivers/net/macvlan.c:317) r10:81364f78 r9:8a86d000 r8:8a9c7e7c r7:8413aa5c r6:00000000 r5:00000000 r4:89802840 [<81364dc8>] (macvlan_process_broadcast) from [<802696a4>] (process_one_work+0x2d4/0x998 kernel/workqueue.c:2275) r10:00000008 r9:8404ec98 r8:84367a02 r7:ddfe6400 r6:ddfe2d40 r5:898dac80 r4:8a86d43c [<802693d0>] (process_one_work) from [<80269dcc>] (worker_thread+0x64/0x54c kernel/workqueue.c:2421) r10:00000008 r9:8a9c6000 r8:84006d00 r7:ddfe2d78 r6:898dac94 r5:ddfe2d40 r4:898dac80 [<80269d68>] (worker_thread) from [<80271f40>] (kthread+0x184/0x1a4 kernel/kthread.c:292) r10:85247e64 r9:898dac80 r8:80269d68 r7:00000000 r6:8a9c6000 r5:89a2ee40 r4:8a97bd00 [<80271dbc>] (kthread) from [<80200114>] (ret_from_fork+0x14/0x20 arch/arm/kernel/entry-common.S:158) Exception stack(0x8a9c7fb0 to 0x8a9c7ff8) Fixes: 412ca1550cbe ("macvlan: Move broadcasts into a work queue") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Reported-by: syzbot <syzkaller@googlegroups.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-30drop_monitor: Perform cleanup upon probe registration failureIdo Schimmel1-0/+23
[ Upstream commit 9398e9c0b1d44eeb700e9e766c02bcc765c82570 ] In the rare case that drop_monitor fails to register its probe on the 'napi_poll' tracepoint, it will not deactivate its hysteresis timer as part of the error path. If the hysteresis timer was armed by the shortly lived 'kfree_skb' probe and user space retries to initiate tracing, a warning will be emitted for trying to initialize an active object [1]. Fix this by properly undoing all the operations that were done prior to probe registration, in both software and hardware code paths. Note that syzkaller managed to fail probe registration by injecting a slab allocation failure [2]. [1] ODEBUG: init active (active state 0) object type: timer_list hint: sched_send_work+0x0/0x60 include/linux/list.h:135 WARNING: CPU: 1 PID: 8649 at lib/debugobjects.c:505 debug_print_object+0x16e/0x250 lib/debugobjects.c:505 Modules linked in: CPU: 1 PID: 8649 Comm: syz-executor.0 Not tainted 5.11.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:debug_print_object+0x16e/0x250 lib/debugobjects.c:505 [...] Call Trace: __debug_object_init+0x524/0xd10 lib/debugobjects.c:588 debug_timer_init kernel/time/timer.c:722 [inline] debug_init kernel/time/timer.c:770 [inline] init_timer_key+0x2d/0x340 kernel/time/timer.c:814 net_dm_trace_on_set net/core/drop_monitor.c:1111 [inline] set_all_monitor_traces net/core/drop_monitor.c:1188 [inline] net_dm_monitor_start net/core/drop_monitor.c:1295 [inline] net_dm_cmd_trace+0x720/0x1220 net/core/drop_monitor.c:1339 genl_family_rcv_msg_doit+0x228/0x320 net/netlink/genetlink.c:739 genl_family_rcv_msg net/netlink/genetlink.c:783 [inline] genl_rcv_msg+0x328/0x580 net/netlink/genetlink.c:800 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2502 genl_rcv+0x24/0x40 net/netlink/genetlink.c:811 netlink_unicast_kernel net/netlink/af_netlink.c:1312 [inline] netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1338 netlink_sendmsg+0x856/0xd90 net/netlink/af_netlink.c:1927 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:672 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2348 ___sys_sendmsg+0xf3/0x170 net/socket.c:2402 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2435 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xae [2] FAULT_INJECTION: forcing a failure. name failslab, interval 1, probability 0, space 0, times 1 CPU: 1 PID: 8645 Comm: syz-executor.0 Not tainted 5.11.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: dump_stack+0xfa/0x151 should_fail.cold+0x5/0xa should_failslab+0x5/0x10 __kmalloc+0x72/0x3f0 tracepoint_add_func+0x378/0x990 tracepoint_probe_register+0x9c/0xe0 net_dm_cmd_trace+0x7fc/0x1220 genl_family_rcv_msg_doit+0x228/0x320 genl_rcv_msg+0x328/0x580 netlink_rcv_skb+0x153/0x420 genl_rcv+0x24/0x40 netlink_unicast+0x533/0x7d0 netlink_sendmsg+0x856/0xd90 sock_sendmsg+0xcf/0x120 ____sys_sendmsg+0x6e8/0x810 ___sys_sendmsg+0xf3/0x170 __sys_sendmsg+0xe5/0x1b0 do_syscall_64+0x2d/0x70 entry_SYSCALL_64_after_hwframe+0x44/0xae Fixes: 70c69274f354 ("drop_monitor: Initialize timer and work item upon tracing enable") Fixes: 8ee2267ad33e ("drop_monitor: Convert to using devlink tracepoint") Reported-by: syzbot+779559d6503f3a56213d@syzkaller.appspotmail.com Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-30ipv6: fix suspecious RCU usage warningWei Wang2-1/+25
[ Upstream commit 28259bac7f1dde06d8ba324e222bbec9d4e92f2b ] Syzbot reported the suspecious RCU usage in nexthop_fib6_nh() when called from ipv6_route_seq_show(). The reason is ipv6_route_seq_start() calls rcu_read_lock_bh(), while nexthop_fib6_nh() calls rcu_dereference_rtnl(). The fix proposed is to add a variant of nexthop_fib6_nh() to use rcu_dereference_bh_rtnl() for ipv6_route_seq_show(). The reported trace is as follows: ./include/net/nexthop.h:416 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 2 locks held by syz-executor.0/17895: at: seq_read+0x71/0x12a0 fs/seq_file.c:169 at: seq_file_net include/linux/seq_file_net.h:19 [inline] at: ipv6_route_seq_start+0xaf/0x300 net/ipv6/ip6_fib.c:2616 stack backtrace: CPU: 1 PID: 17895 Comm: syz-executor.0 Not tainted 4.15.0-syzkaller #0 Call Trace: [<ffffffff849edf9e>] __dump_stack lib/dump_stack.c:17 [inline] [<ffffffff849edf9e>] dump_stack+0xd8/0x147 lib/dump_stack.c:53 [<ffffffff8480b7fa>] lockdep_rcu_suspicious+0x153/0x15d kernel/locking/lockdep.c:5745 [<ffffffff8459ada6>] nexthop_fib6_nh include/net/nexthop.h:416 [inline] [<ffffffff8459ada6>] ipv6_route_native_seq_show net/ipv6/ip6_fib.c:2488 [inline] [<ffffffff8459ada6>] ipv6_route_seq_show+0x436/0x7a0 net/ipv6/ip6_fib.c:2673 [<ffffffff81c556df>] seq_read+0xccf/0x12a0 fs/seq_file.c:276 [<ffffffff81dbc62c>] proc_reg_read+0x10c/0x1d0 fs/proc/inode.c:231 [<ffffffff81bc28ae>] do_loop_readv_writev fs/read_write.c:714 [inline] [<ffffffff81bc28ae>] do_loop_readv_writev fs/read_write.c:701 [inline] [<ffffffff81bc28ae>] do_iter_read+0x49e/0x660 fs/read_write.c:935 [<ffffffff81bc81ab>] vfs_readv+0xfb/0x170 fs/read_write.c:997 [<ffffffff81c88847>] kernel_readv fs/splice.c:361 [inline] [<ffffffff81c88847>] default_file_splice_read+0x487/0x9c0 fs/splice.c:416 [<ffffffff81c86189>] do_splice_to+0x129/0x190 fs/splice.c:879 [<ffffffff81c86f66>] splice_direct_to_actor+0x256/0x890 fs/splice.c:951 [<ffffffff81c8777d>] do_splice_direct+0x1dd/0x2b0 fs/splice.c:1060 [<ffffffff81bc4747>] do_sendfile+0x597/0xce0 fs/read_write.c:1459 [<ffffffff81bca205>] SYSC_sendfile64 fs/read_write.c:1520 [inline] [<ffffffff81bca205>] SyS_sendfile64+0x155/0x170 fs/read_write.c:1506 [<ffffffff81015fcf>] do_syscall_64+0x1ff/0x310 arch/x86/entry/common.c:305 [<ffffffff84a00076>] entry_SYSCALL_64_after_hwframe+0x42/0xb7 Fixes: f88d8ea67fbdb ("ipv6: Plumb support for nexthop object in a fib6_info") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Wei Wang <weiwan@google.com> Cc: David Ahern <dsahern@kernel.org> Cc: Ido Schimmel <idosch@idosch.org> Cc: Petr Machata <petrm@nvidia.com> Cc: Eric Dumazet <edumazet@google.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-30net/mlx5e: Don't match on Geneve options in case option masks are all zeroMaor Dickman1-0/+4
[ Upstream commit 385d40b042e60aa0b677d7b400a0fefb44bcbaf4 ] The cited change added offload support for Geneve options without verifying the validity of the options masks, this caused offload of rules with match on Geneve options with class,type and data masks which are zero to fail. Fix by ignoring the match on Geneve options in case option masks are all zero. Fixes: 9272e3df3023 ("net/mlx5e: Geneve, Add support for encap/decap flows offload") Signed-off-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Oz Shlomo <ozsh@nvidia.com> Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-30net/mlx5e: When changing XDP program without reset, take refs for XSK RQsMaxim Mikityanskiy1-1/+3
[ Upstream commit e5eb01344e9b09bb9d255b9727449186f7168df8 ] Each RQ (including XSK RQs) takes a reference to the XDP program. When an XDP program is attached or detached, the channels and queues are recreated, however, there is a special flow for changing an active XDP program to another one. In that flow, channels and queues stay alive, but the refcounts of the old and new XDP programs are adjusted. This flow didn't increment refcount by the number of active XSK RQs, and this commit fixes it. Fixes: db05815b36cb ("net/mlx5e: Add XSK zero-copy support") Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-30net/mlx5e: RX, Mind the MPWQE gaps when calculating offsetsTariq Toukan3-8/+9
[ Upstream commit d5dd03b26ba49c4ffe67ee1937add82293c19794 ] Since cited patch, MLX5E_REQUIRED_WQE_MTTS is not a power of two. Hence, usage of MLX5E_LOG_ALIGNED_MPWQE_PPW should be replaced, as it lost some accuracy. Use the designated macro to calculate the number of required MTTs. This makes sure the solution in cited patch works properly. While here, un-inline mlx5e_get_mpwqe_offset(), and remove the unused RQ parameter. Fixes: c3c9402373fe ("net/mlx5e: Add resiliency in Striding RQ mode for packets larger than MTU") Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-30libbpf: Fix INSTALL flag orderGeorgi Valkov1-1/+1
[ Upstream commit e7fb6465d4c8e767e39cbee72464e0060ab3d20c ] It was reported ([0]) that having optional -m flag between source and destination arguments in install command breaks bpftools cross-build on MacOS. Move -m to the front to fix this issue. [0] https://github.com/openwrt/openwrt/pull/3959 Fixes: 7110d80d53f4 ("libbpf: Makefile set specified permission mode") Signed-off-by: Georgi Valkov <gvalkov@abv.bg> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20210308183038.613432-1-andrii@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-30bpf: Change inode_storage's lookup_elem return value from NULL to -EBADFTal Lossos1-1/+1
[ Upstream commit 769c18b254ca191b45047e1fcb3b2ce56fada0b6 ] bpf_fd_inode_storage_lookup_elem() returned NULL when getting a bad FD, which caused -ENOENT in bpf_map_copy_value. -EBADF error is better than -ENOENT for a bad FD behaviour. The patch was partially contributed by CyberArk Software, Inc. Fixes: 8ea636848aca ("bpf: Implement bpf_local_storage for inodes") Signed-off-by: Tal Lossos <tallossos@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yhs@fb.com> Acked-by: KP Singh <kpsingh@kernel.org> Link: https://lore.kernel.org/bpf/20210307120948.61414-1-tallossos@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-30veth: Store queue_mapping independently of XDP prog presenceMaciej Fijalkowski1-2/+1
[ Upstream commit edbea922025169c0e5cdca5ebf7bf5374cc5566c ] Currently, veth_xmit() would call the skb_record_rx_queue() only when there is XDP program loaded on peer interface in native mode. If peer has XDP prog in generic mode, then netif_receive_generic_xdp() has a call to netif_get_rxqueue(skb), so for multi-queue veth it will not be possible to grab a correct rxq. To fix that, store queue_mapping independently of XDP prog presence on peer interface. Fixes: 638264dc9022 ("veth: Support per queue XDP ring") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Toshiaki Makita <toshiaki.makita1@gmail.com> Link: https://lore.kernel.org/bpf/20210303152903.11172-1-maciej.fijalkowski@intel.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-30soc: ti: omap-prm: Fix occasional abort on reset deassert for dra7 ivaTony Lindgren1-1/+5
[ Upstream commit effe89e40037038db7711bdab5d3401fe297d72c ] On reset deassert, we must wait a bit after the rstst bit change before we allow clockdomain autoidle again. Otherwise we get the following oops sometimes on dra7 with iva: Unhandled fault: imprecise external abort (0x1406) at 0x00000000 44000000.ocp:L3 Standard Error: MASTER MPU TARGET IVA_CONFIG (Read Link): At Address: 0x0005A410 : Data Access in User mode during Functional access Internal error: : 1406 [#1] SMP ARM ... (sysc_write_sysconfig) from [<c0782cb0>] (sysc_enable_module+0xcc/0x260) (sysc_enable_module) from [<c0782f0c>] (sysc_runtime_resume+0xc8/0x174) (sysc_runtime_resume) from [<c0a3e1ac>] (genpd_runtime_resume+0x94/0x224) (genpd_runtime_resume) from [<c0a33f0c>] (__rpm_callback+0xd8/0x180) It is unclear what all devices this might affect, but presumably other devices with the rstst bit too can be affected. So let's just enable the delay for all the devices with rstst bit for now. Later on we may want to limit the list to the know affected devices if needed. Fixes: d30cd83f6853 ("soc: ti: omap-prm: add support for denying idle for reset clockdomain") Reported-by: Yongqin Liu <yongqin.liu@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-30ARM: OMAP2+: Fix smartreflex init regression after dropping legacy dataTony Lindgren1-17/+58
[ Upstream commit fbfa463be8dc7957ee4f81556e9e1ea2a951807d ] When I dropped legacy data for omap4 and dra7 smartreflex in favor of device tree based data, it seems I only testd for the "SmartReflex Class3 initialized" line in dmesg. I missed the fact that there is also omap_devinit_smartreflex() that happens later, and now it produces an error on boot for "No Voltage table for the corresponding vdd. Cannot create debugfs entries for n-values". This happens as we no longer have the smartreflex instance legacy data, and have not yet moved completely to device tree based booting for the driver. Let's fix the issue by changing the smartreflex init to use names. This should all eventually go away in favor of doing the init in the driver based on devicetree compatible value. Note that dra7xx_init_early() is not calling any voltage domain init like omap54xx_voltagedomains_init(), or a dra7 specific voltagedomains init. This means that on dra7 smartreflex is still not fully initialized, and also seems to be missing the related devicetree nodes. Fixes: a6b1e717e942 ("ARM: OMAP2+: Drop legacy platform data for omap4 smartreflex") Fixes: e54740b4afe8 ("ARM: OMAP2+: Drop legacy platform data for dra7 smartreflex") Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-30bus: omap_l3_noc: mark l3 irqs as IRQF_NO_THREADGrygorii Strashko1-2/+2
[ Upstream commit 7d7275b3e866cf8092bd12553ec53ba26864f7bb ] The main purpose of l3 IRQs is to catch OCP bus access errors and identify corresponding code places by showing call stack, so it's important to handle L3 interconnect errors as fast as possible. On RT these IRQs will became threaded and will be scheduled much more late from the moment actual error occurred so showing completely useless information. Hence, mark l3 IRQs as IRQF_NO_THREAD so they will not be forced threaded on RT or if force_irqthreads = true. Fixes: 0ee7261c9212 ("drivers: bus: Move the OMAP interconnect driver to drivers/bus/") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-30dm ioctl: fix out of bounds array access when no devicesMikulas Patocka1-1/+1
commit 4edbe1d7bcffcd6269f3b5eb63f710393ff2ec7a upstream. If there are not any dm devices, we need to zero the "dev" argument in the first structure dm_name_list. However, this can cause out of bounds write, because the "needed" variable is zero and len may be less than eight. Fix this bug by reporting DM_BUFFER_FULL_FLAG if the result buffer is too small to hold the "nl->dev" value. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-30dm verity: fix DM_VERITY_OPTS_MAX valueJeongHyeon Lee1-1/+1
commit 160f99db943224e55906dd83880da1a704c6e6b9 upstream. Three optional parameters must be accepted at once in a DM verity table, e.g.: (verity_error_handling_mode) (ignore_zero_block) (check_at_most_once) Fix this to be possible by incrementing DM_VERITY_OPTS_MAX. Signed-off-by: JeongHyeon Lee <jhs2.lee@samsung.com> Fixes: 843f38d382b1 ("dm verity: add 'check_at_most_once' option to only validate hashes once") Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-30drm/i915: Fix the GT fence revocation runtime PM logicImre Deak3-6/+41
commit 8840e3bd981f128846b01c12d3966d115e8617c9 upstream. To optimize some task deferring it until runtime resume unless someone holds a runtime PM reference (because in this case the task can be done w/o the overhead of runtime resume), we have to use the runtime PM get-if-active logic: If the runtime PM usage count is 0 (and so get-if-in-use would return false) the runtime suspend handler is not necessarily called yet (it could be just pending), so the device is not necessarily powered down, and so the runtime resume handler is not guaranteed to be called. The fence revocation depends on the above deferral, so add a get-if-active helper and use it during fence revocation. v2: - Add code comment explaining the fence reg programming deferral logic to i915_vma_revoke_fence(). (Chris) - Add Cc: stable and Fixes: tags. (Chris) - Fix the function docbook comment. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: <stable@vger.kernel.org> # v4.12+ Fixes: 181df2d458f3 ("drm/i915: Take rpm wakelock for releasing the fence on unbind") Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210322204223.919936-1-imre.deak@intel.com (cherry picked from commit 9d58aa46291d4d696bb1eac3436d3118f7bf2573) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-30drm/amdgpu: Add additional Sienna Cichlid PCI IDAlex Deucher1-0/+1
commit c933b111094f2818571fc51b81b98ee0d370c035 upstream. Add new DID. Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-30drm/amdgpu/display: restore AUX_DPHY_TX_CONTROL for DCN2.xAlex Deucher1-2/+1
commit 5c458585c0141754cdcbf25feebb547dd671b559 upstream. Commit 098214999c8f added fetching of the AUX_DPHY register values from the vbios, but it also changed the default values in the case when there are no values in the vbios. This causes problems with displays with high refresh rates. To fix this, switch back to the original default value for AUX_DPHY_TX_CONTROL. Fixes: 098214999c8f ("drm/amd/display: Read VBIOS Golden Settings Tbl") Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1426 Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Igor Kravchenko <Igor.Kravchenko@amd.com> Cc: Aric Cyr <Aric.Cyr@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-30drm/amd/pm: workaround for audio noise issueKenneth Feng4-11/+166
commit 9d03730ecbc5afabfda26d4dbb014310bc4ea4d9 upstream. On some Intel platforms, audio noise can be detected due to high pcie speed switch latency. This patch leaverages ppfeaturemask to fix to the highest pcie speed then disable pcie switching. v2: coding style fix Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-30drm/etnaviv: Use FOLL_FORCE for userptrDaniel Vetter1-1/+1
commit cd5297b0855f17c8b4e3ef1d20c6a3656209c7b3 upstream. Nothing checks userptr.ro except this call to pup_fast, which means there's nothing actually preventing userspace from writing to this. Which means you can just read-only mmap any file you want, userptr it and then write to it with the gpu. Not good. The right way to handle this is FOLL_WRITE | FOLL_FORCE, which will break any COW mappings and update tracking for MAY_WRITE mappings so there's no exploit and the vm isn't confused about what's going on. For any legit use case there's no difference from what userspace can observe and do. Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Cc: stable@vger.kernel.org Cc: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Russell King <linux+etnaviv@armlinux.org.uk> Cc: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: etnaviv@lists.freedesktop.org Link: https://patchwork.freedesktop.org/patch/msgid/20210301095254.1946084-1-daniel.vetter@ffwll.ch Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-30integrity: double check iint_cache was initializedMimi Zohar1-0/+8
commit 92063f3ca73aab794bd5408d3361fd5b5ea33079 upstream. The kernel may be built with multiple LSMs, but only a subset may be enabled on the boot command line by specifying "lsm=". Not including "integrity" on the ordered LSM list may result in a NULL deref. As reported by Dmitry Vyukov: in qemu: qemu-system-x86_64 -enable-kvm -machine q35,nvdimm -cpu max,migratable=off -smp 4 -m 4G,slots=4,maxmem=16G -hda wheezy.img -kernel arch/x86/boot/bzImage -nographic -vga std -soundhw all -usb -usbdevice tablet -bt hci -bt device:keyboard -net user,host=10.0.2.10,hostfwd=tcp::10022-:22 -net nic,model=virtio-net-pci -object memory-backend-file,id=pmem1,share=off,mem-path=/dev/zero,size=64M -device nvdimm,id=nvdimm1,memdev=pmem1 -append "console=ttyS0 root=/dev/sda earlyprintk=serial rodata=n oops=panic panic_on_warn=1 panic=86400 lsm=smack numa=fake=2 nopcid dummy_hcd.num=8" -pidfile vm_pid -m 2G -cpu host But it crashes on NULL deref in integrity_inode_get during boot: Run /sbin/init as init process BUG: kernel NULL pointer dereference, address: 000000000000001c PGD 0 P4D 0 Oop