summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-07-19net: moxa: Use devm_platform_get_and_ioremap_resource()Yang Yingliang1-3/+2
[ Upstream commit 35cba15a504bf4f585bb9d78f47b22b28a1a06b2 ] Use devm_platform_get_and_ioremap_resource() to simplify code and avoid a null-ptr-deref by checking 'res' in it. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-19net: micrel: check return value after calling platform_get_resource()Yang Yingliang1-0/+4
[ Upstream commit 20f1932e2282c58cb5ac59517585206cf5b385ae ] It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-19net: mvpp2: check return value after calling platform_get_resource()Yang Yingliang1-0/+4
[ Upstream commit 0bb51a3a385790a4be20085494cf78f70dadf646 ] It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-19net: bcmgenet: check return value after calling platform_get_resource()Yang Yingliang1-0/+4
[ Upstream commit 74325bf0104573c6dfce42837139aeef3f34be76 ] It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-19net: mscc: ocelot: check return value after calling platform_get_resource()Yang Yingliang1-0/+5
[ Upstream commit f1fe19c2cb3fdc92a614cf330ced1613f8f1a681 ] It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-19virtio_net: Remove BUG() to avoid machine deadXianting Tian1-1/+1
[ Upstream commit 85eb1389458d134bdb75dad502cc026c3753a619 ] We should not directly BUG() when there is hdr error, it is better to output a print when such error happens. Currently, the caller of xmit_skb() already did it. Signed-off-by: Xianting Tian <xianting.tian@linux.alibaba.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-19ice: fix clang warning regarding deadcode.DeadStoresPaul M Stillwell Jr1-5/+1
[ Upstream commit 7e94090ae13e1ae5fe8bd3a9cd08136260bb7039 ] clang generates deadcode.DeadStores warnings when a variable is used to read a value, but then that value isn't used later in the code. Fix this warning. Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-19ice: set the value of global config lock timeout longerLiwei Song1-1/+1
[ Upstream commit fb3612840d4f587a0af9511a11d7989d1fa48206 ] It may need hold Global Config Lock a longer time when download DDP package file, extend the timeout value to 5000ms to ensure that download can be finished before other AQ command got time to run, this will fix the issue below when probe the device, 5000ms is a test value that work with both Backplane and BreakoutCable NVM image: ice 0000:f4:00.0: VSI 12 failed lan queue config, error ICE_ERR_CFG ice 0000:f4:00.0: Failed to delete VSI 12 in FW - error: ICE_ERR_AQ_TIMEOUT ice 0000:f4:00.0: probe failed due to setup PF switch: -12 ice: probe of 0000:f4:00.0 failed with error -12 Signed-off-by: Liwei Song <liwei.song@windriver.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-19pinctrl: mcp23s08: fix race condition in irq handlerRadim Pavlik1-5/+5
[ Upstream commit 897120d41e7afd9da435cb00041a142aeeb53c07 ] Checking value of MCP_INTF in mcp23s08_irq suggests that the handler may be called even when there is no interrupt pending. But the actual interrupt could happened between reading MCP_INTF and MCP_GPIO. In this situation we got nothing from MCP_INTF, but the event gets acknowledged on the expander by reading MCP_GPIO. This leads to losing events. Fix the problem by not reading any register until we see something in MCP_INTF. The error was reproduced and fix tested on MCP23017. Signed-off-by: Radim Pavlik <radim.pavlik@tbs-biometrics.com> Link: https://lore.kernel.org/r/AM7PR06MB6769E1183F68DEBB252F665ABA3E9@AM7PR06MB6769.eurprd06.prod.outlook.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-19net: bridge: mrp: Update ring transitions.Horatiu Vultur1-4/+2
[ Upstream commit fcb34635854a5a5814227628867ea914a9805384 ] According to the standard IEC 62439-2, the number of transitions needs to be counted for each transition 'between' ring state open and ring state closed and not from open state to closed state. Therefore fix this for both ring and interconnect ring. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-19dm: Fix dm_accept_partial_bio() relative to zone management commandsDamien Le Moal1-2/+6
[ Upstream commit 6842d264aa5205da338b6dcc6acfa2a6732558f1 ] Fix dm_accept_partial_bio() to actually check that zone management commands are not passed as explained in the function documentation comment. Also, since a zone append operation cannot be split, add REQ_OP_ZONE_APPEND as a forbidden command. White lines are added around the group of BUG_ON() calls to make the code more legible. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-19dm writecache: don't split bios when overwriting contiguous cache contentMikulas Patocka1-8/+30
[ Upstream commit ee50cc19d80e9b9a8283d1fb517a778faf2f6899 ] If dm-writecache overwrites existing cached data, it splits the incoming bio into many block-sized bios. The I/O scheduler does merge these bios into one large request but this needless splitting and merging causes performance degradation. Fix this by avoiding bio splitting if the cache target area that is being overwritten is contiguous. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-19dm space maps: don't reset space map allocation cursor when committingJoe Thornber2-2/+16
[ Upstream commit 5faafc77f7de69147d1e818026b9a0cbf036a7b2 ] Current commit code resets the place where the search for free blocks will begin back to the start of the metadata device. There are a couple of repercussions to this: - The first allocation after the commit is likely to take longer than normal as it searches for a free block in an area that is likely to have very few free blocks (if any). - Any free blocks it finds will have been recently freed. Reusing them means we have fewer old copies of the metadata to aid recovery from hardware error. Fix these issues by leaving the cursor alone, only resetting when the search hits the end of the metadata device. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-19RDMA/cxgb4: Fix missing error code in create_qp()Jiapeng Chong1-0/+1
[ Upstream commit aeb27bb76ad8197eb47890b1ff470d5faf8ec9a5 ] The error code is missing in this code scenario so 0 will be returned. Add the error code '-EINVAL' to the return value 'ret'. Eliminates the follow smatch warning: drivers/infiniband/hw/cxgb4/qp.c:298 create_qp() warn: missing error code 'ret'. Link: https://lore.kernel.org/r/1622545669-20625-1-git-send-email-jiapeng.chong@linux.alibaba.com Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-19net: tcp better handling of reordering then loss casesYuchung Cheng1-19/+26
[ Upstream commit a29cb6914681a55667436a9eb7a42e28da8cf387 ] This patch aims to improve the situation when reordering and loss are ocurring in the same flight of packets. Previously the reordering would first induce a spurious recovery, then the subsequent ACK may undo the cwnd (based on the timestamps e.g.). However the current loss recovery does not proceed to invoke RACK to install a reordering timer. If some packets are also lost, this may lead to a long RTO-based recovery. An example is https://groups.google.com/g/bbr-dev/c/OFHADvJbTEI The solution is to after reverting the recovery, always invoke RACK to either mount the RACK timer to fast retransmit after the reordering window, or restarts the recovery if new loss is identified. Hence it is possible the sender may go from Recovery to Disorder/Open to Recovery again in one ACK. Reported-by: mingkun bian <bianmingkun@gmail.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-19drm/amdgpu: remove unsafe optimization to drop preamble ibJiansong Chen1-10/+1
[ Upstream commit 7d9c70d23550eb86a1bec1954ccaa8d6ec3a3328 ] Take the situation with gfxoff, the optimization may cause corrupt CE ram contents. In addition emit_cntxcntl callback has similar optimization which firmware can handle properly even for power feature. Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-19drm/amd/display: Avoid HDCP over-read and corruptionKees Cook1-1/+3
[ Upstream commit 06888d571b513cbfc0b41949948def6cb81021b2 ] Instead of reading the desired 5 bytes of the actual target field, the code was reading 8. This could result in a corrupted value if the trailing 3 bytes were non-zero, so instead use an appropriately sized and zero-initialized bounce buffer, and read only 5 bytes before casting to u64. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-19MIPS: ingenic: Select CPU_SUPPORTS_CPUFREQ && MIPS_EXTERNAL_TIMERPaul Cercueil1-0/+2
[ Upstream commit eb3849370ae32b571e1f9a63ba52c61adeaf88f7 ] The clock driving the XBurst CPUs in Ingenic SoCs is integer divided from the main PLL. As such, it is possible to control the frequency of the CPU, either by changing the divider, or by changing the rate of the main PLL. The XBurst CPUs also lack the CP0 timer; the TCU, a separate piece of hardware in the SoC, provides this functionality. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-19MIPS: cpu-probe: Fix FPU detection on Ingenic JZ4760(B)Paul Cercueil1-0/+5
[ Upstream commit fc52f92a653215fbd6bc522ac5311857b335e589 ] Ingenic JZ4760 and JZ4760B do have a FPU, but the config registers don't report it. Force the FPU detection in case the processor ID match the JZ4760(B) one. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-19ipv6: use prandom_u32() for ID generationWilly Tarreau1-23/+5
[ Upstream commit 62f20e068ccc50d6ab66fdb72ba90da2b9418c99 ] This is a complement to commit aa6dd211e4b1 ("inet: use bigger hash table for IP ID generation"), but focusing on some specific aspects of IPv6. Contary to IPv4, IPv6 only uses packet IDs with fragments, and with a minimum MTU of 1280, it's much less easy to force a remote peer to produce many fragments to explore its ID sequence. In addition packet IDs are 32-bit in IPv6, which further complicates their analysis. On the other hand, it is often easier to choose among plenty of possible source addresses and partially work around the bigger hash table the commit above permits, which leaves IPv6 partially exposed to some possibilities of remote analysis at the risk of weakening some protocols like DNS if some IDs can be predicted with a good enough probability. Given the wide range of permitted IDs, the risk of collision is extremely low so there's no need to rely on the positive increment algorithm that is shared with the IPv4 code via ip_idents_reserve(). We have a fast PRNG, so let's simply call prandom_u32() and be done with it. Performance measurements at 10 Gbps couldn't show any difference with the previous code, even when using a single core, because due to the large fragments, we're limited to only ~930 kpps at 10 Gbps and the cost of the random generation is completely offset by other operations and by the network transfer time. In addition, this change removes the need to update a shared entry in the idents table so it may even end up being slightly faster on large scale systems where this matters. The risk of at least one collision here is about 1/80 million among 10 IDs, 1/850k among 100 IDs, and still only 1/8.5k among 1000 IDs, which remains very low compared to IPv4 where all IDs are reused every 4 to 80ms on a 10 Gbps flow depending on packet sizes. Reported-by: Amit Klein <aksecurity@gmail.com> Signed-off-by: Willy Tarreau <w@1wt.eu> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20210529110746.6796-1-w@1wt.eu Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-19virtio-net: Add validation for used lengthXie Yongji1-7/+13
[ Upstream commit ad993a95c508417acdeb15244109e009e50d8758 ] This adds validation for used length (might come from an untrusted device) to avoid data corruption or loss. Signed-off-by: Xie Yongji <xieyongji@bytedance.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20210531135852.113-1-xieyongji@bytedance.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-19drm: bridge: cdns-mhdp8546: Fix PM reference leak inYu Kuai1-2/+2
[ Upstream commit f674555ee5444c8987dfea0922f1cf6bf0c12847 ] pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to putting operation will result in reference leak here. Fix it by replacing it with pm_runtime_resume_and_get to keep usage counter balanced. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210531135622.3348252-1-yukuai3@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-19clk: tegra: Ensure that PLLU configuration is applied properlyDmitry Osipenko1-5/+4
[ Upstream commit a7196048cd5168096c2c4f44a3939d7a6dcd06b9 ] The PLLU (USB) consists of the PLL configuration itself and configuration of the PLLU outputs. The PLLU programming is inconsistent on T30 vs T114, where T114 immediately bails out if PLLU is enabled and T30 re-enables a potentially already enabled PLL (left after bootloader) and then fully reprograms it, which could be unsafe to do. The correct way should be to skip enabling of the PLL if it's already enabled and then apply configuration to the outputs. This patch doesn't fix any known problems, it's a minor improvement. Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-19clk: tegra: Fix refcounting of gate clocksDmitry Osipenko2-25/+58
[ Upstream commit c592c8a28f5821e880ac6675781cd8a151b0737c ] The refcounting of the gate clocks has a bug causing the enable_refcnt to underflow when unused clocks are disabled. This happens because clk provider erroneously bumps the refcount if clock is enabled at a boot time, which it shouldn't be doing, and it does this only for the gate clocks, while peripheral clocks are using the same gate ops and the peripheral clocks are missing the initial bump. Hence the refcount of the peripheral clocks is 0 when unused clocks are disabled and then the counter is decremented further by the gate ops, causing the integer underflow. Fix this problem by removing the erroneous bump and by implementing the disable_unused() callback, which disables the unused gates properly. The visible effect of the bug is such that the unused clocks are never gated if a loaded kernel module grabs the unused clocks and starts to use them. In practice this shouldn't cause any real problems for the drivers and boards supported by the kernel today. Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-19RDMA/rtrs: Change MAX_SESS_QUEUE_DEPTHGioh Kim1-5/+8
[ Upstream commit 3a98ea7041b7d18ac356da64823c2ba2f8391b3e ] Max IB immediate data size is 2^28 (MAX_IMM_PAYL_BITS) and the minimum chunk size is 4096 (2^12). Therefore the maximum sess_queue_depth is 65536 (2^16). Link: https://lore.kernel.org/r/20210528113018.52290-6-jinpu.wang@ionos.com Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com> Signed-off-by: Jack Wang <jinpu.wang@ionos.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-19net: stmmac: the XPCS obscures a potential "PHY not found" errorVladimir Oltean1-6/+15
[ Upstream commit 4751d2aa321f2828d8c5d2f7ce4ed18a01e47f46 ] stmmac_mdio_register() has logic to search for PHYs on the MDIO bus and assign them IRQ lines, as well as to set priv->plat->phy_addr. If no PHY is found, the "found" variable remains set to 0 and the function errors out. After the introduction of commit f213bbe8a9d6 ("net: stmmac: Integrate it with DesignWare XPCS"), the "found" variable was immediately reused for searching for a PCS on the same MDIO bus. This can result in 2 types of potential problems (none of them seems to be seen on the only Intel system that sets has_xpcs = true, otherwise it would have been reported): 1. If a PCS is found but a PHY is not, then the code happily exits with no error. One might say "yes, but this is not possible, because of_mdiobus_register will probe a PHY for all MDIO addresses, including for the XPCS, so if an XPCS exists, then a PHY certainly exists too". Well, that is not true, see intel_mgbe_common_data(): /* Ensure mdio bus scan skips intel serdes and pcs-xpcs */ plat->mdio_bus_data->phy_mask = 1 << INTEL_MGBE_ADHOC_ADDR; plat->mdio_bus_data->phy_mask |= 1 << INTEL_MGBE_XPCS_ADDR; 2. A PHY is found but an MDIO device with the XPCS PHY ID isn't, and in that case, the error message will be "No PHY found". Confusing. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20210527155959.3270478-1-olteanv@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-19drm: rockchip: add missing registers for RK3066Alex Bee1-7/+9
[ Upstream commit 742203cd56d150eb7884eb45abb7d9dbc2bdbf04 ] Add dither_up, dsp_lut_en and data_blank registers to enable their respective functionality for RK3066's VOP. While at that also fix .rb_swap and .format registers for all windows, which have to be set though RK3066_SYS_CTRL1 register. Also remove .scl from win1: Scaling is only supported on the primary plane. Signed-off-by: Alex Bee <knaerzche@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210528130554.72191-4-knaerzche@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-19drm: rockchip: add missing registers for RK3188Alex Bee1-1/+4
[ Upstream commit ab64b448a175b8a5a4bd323b8f74758c2574482c ] Add dither_up, dsp_lut_en and data_blank registers to enable their respective functionality for RK3188's VOP. While at that also fix .dsp_blank register which is (only) set with BIT24 (same as RK3066) Signed-off-by: Alex Bee <knaerzche@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210528130554.72191-3-knaerzche@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-19net/mlx5: Fix lag port remapping logicEli Cohen1-6/+13
[ Upstream commit 8613641063617c1dfc731b403b3ee4935ef15f87 ] Fix the logic so that if both ports netdevices are enabled or disabled, use the trivial mapping without swapping. If only one of the netdevice's tx is enabled, use it to remap traffic to that port. Signed-off-by: Eli Cohen <elic@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-19net/mlx5e: IPsec/rep_tc: Fix rep_tc_update_skb drops IPsec packetHuy Nguyen1-2/+4
[ Upstream commit c07274ab1ab2c38fb128e32643c22c89cb319384 ] rep_tc copy REG_C1 to REG_B. IPsec crypto utilizes the whole REG_B register with BIT31 as IPsec marker. rep_tc_update_skb drops IPsec because it thought REG_B contains bad value. In previous patch, BIT 31 of REG_C1 is reserved for IPsec. Skip the rep_tc_update_skb if BIT31 of REG_B is set. Signed-off-by: Huy Nguyen <huyn@nvidia.com> Signed-off-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-19clk: renesas: r8a77995: Add ZA2 clockKuninori Morimoto1-0/+1
[ Upstream commit 790c06cc5df263cdaff748670cc65958c81b0951 ] R-Car D3 ZA2 clock is from PLL0D3 or S0, and it can be controlled by ZA2CKCR. It is needed for R-Car Sound, but is not used so far. Using default settings is very enough at this point. This patch adds it by DEF_FIXED(). Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87pmxclrmy.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-19drm/bridge: cdns: Fix PM reference leak in cdns_dsi_transfer()Zou Wei1-1/+1
[ Upstream commit 33f90f27e1c5ccd648d3e78a1c28be9ee8791cf1 ] pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to putting operation will result in reference leak here. Fix it by replacing it with pm_runtime_resume_and_get to keep usage counter balanced. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zou Wei <zou_wei@huawei.com> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/1621840862-106024-1-git-send-email-zou_wei@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-19igb: fix assignment on big endian machinesJesse Brandeburg1-2/+2
[ Upstream commit b514958dd1a3bd57638b0e63b8e5152b1960e6aa ] The igb driver was trying hard to be sparse correct, but somehow ended up converting a variable into little endian order and then tries to OR something with it. A much plainer way of doing things is to leave all variables and OR operations in CPU (non-endian) mode, and then convert to little endian only once, which is what this change does. This probably fixes a bug that might have been seen only on big endian systems. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-19igb: handle vlan types with checker enabledJesse Brandeburg2-4/+5
[ Upstream commit c7cbfb028b95360403d579c47aaaeef1ff140964 ] The sparse build (C=2) finds some issues with how the driver dealt with the (very difficult) hardware that in some generations uses little-endian, and in others uses big endian, for the VLAN field. The code as written picks __le16 as a type and for some hardware revisions we override it to __be16 as done in this patch. This impacted the VF driver as well so fix it there too. Also change the vlan_tci assignment to override the sparse warning without changing functionality. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-19e100: handle eeprom as little endianJesse Brandeburg1-6/+6
[ Upstream commit d4ef55288aa2e1b76033717242728ac98ddc4721 ] Sparse tool was warning on some implicit conversions from little endian data read from the EEPROM on the e100 cards. Fix these by being explicit about the conversions using le16_to_cpu(). Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-19drm/vc4: hdmi: Fix PM reference leak in vc4_hdmi_encoder_pre_crtc_co()Zou Wei1-1/+1
[ Upstream commit 5e4322a8b266bc9f5ee7ea4895f661c01dbd7cb3 ] pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to putting operation will result in reference leak here. Fix it by replacing it with pm_runtime_resume_and_get to keep usage counter balanced. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zou Wei <zou_wei@huawei.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/1621840854-105978-1-git-send-email-zou_wei@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-19drm/vc4: Fix clock source for VEC PixelValve on BCM2711Mateusz Kwiatkowski1-1/+1
[ Upstream commit fc7a8abcee2225d6279ff785d33e24d70c738c6e ] On the BCM2711 (Raspberry Pi 4), the VEC is actually connected to output 2 of pixelvalve3. NOTE: This contradicts the Broadcom docs, but has been empirically tested and confirmed by Raspberry Pi firmware devs. Signed-off-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210520150344.273900-2-maxime@cerno.tech Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-19udf: Fix NULL pointer dereference in udf_symlink functionArturo Giusti1-0/+4
[ Upstream commit fa236c2b2d4436d9f19ee4e5d5924e90ffd7bb43 ] In function udf_symlink, epos.bh is assigned with the value returned by udf_tgetblk. The function udf_tgetblk is defined in udf/misc.c and returns the value of sb_getblk function that could be NULL. Then, epos.bh is used without any check, causing a possible NULL pointer dereference when sb_getblk fails. This fix adds a check to validate the value of epos.bh. Link: https://bugzilla.kernel.org/show_bug.cgi?id=213083 Signed-off-by: Arturo Giusti <koredump@protonmail.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-19drm/sched: Avoid data corruptionsAndrey Grodzovsky1-0/+5
[ Upstream commit 0b10ab80695d61422337ede6ff496552d8ace99d ] Wait for all dependencies of a job to complete before killing it to avoid data corruptions. Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210519141407.88444-1-andrey.grodzovsky@amd.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-19drm/scheduler: Fix hang when sched_entity releasedAndrey Grodzovsky2-1/+26
[ Upstream commit c61cdbdbffc169dc7f1e6fe94dfffaf574fe672a ] Problem: If scheduler is already stopped by the time sched_entity is released and entity's job_queue not empty I encountred a hang in drm_sched_entity_flush. This is because drm_sched_entity_is_idle never becomes false. Fix: In drm_sched_fini detach all sched_entities from the scheduler's run queues. This will satisfy drm_sched_entity_is_idle. Also wakeup all those processes stuck in sched_entity flushing as the scheduler main thread which wakes them up is stopped by now. v2: Reverse order of drm_sched_rq_remove_entity and marking s_entity as stopped to prevent reinserion back to rq due to race. v3: Drop drm_sched_rq_remove_entity, only modify entity->stopped and check for it in drm_sched_entity_is_idle Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210512142648.666476-14-andrey.grodzovsky@amd.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-19pinctrl: equilibrium: Add missing MODULE_DEVICE_TABLEBixuan Cui1-0/+1
[ Upstream commit d7f444499d6faf9a6ae3b27ec094109528d2b9a7 ] This patch adds missing MODULE_DEVICE_TABLE definition which generates correct modalias for automatic loading of this driver when it is built as an external module. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Bixuan Cui <cuibixuan@huawei.com> Link: https://lore.kernel.org/r/20210508031502.53637-1-cuibixuan@huawei.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-19net/sched: cls_api: increase max_reclassify_loopDavide Caratti1-1/+1
[ Upstream commit 05ff8435e50569a0a6b95e5ceaea43696e8827ab ] modern userspace applications, like OVN, can configure the TC datapath to "recirculate" packets several times. If more than 4 "recirculation" rules are configured, packets can be dropped by __tcf_classify(). Changing the maximum number of reclassifications (from 4 to 16) should be sufficient to prevent drops in most use cases, and guard against loops at the same time. Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-19net: mdio: provide shim implementation of devm_of_mdiobus_registerVladimir Oltean1-0/+7
[ Upstream commit 86544c3de6a2185409c5a3d02f674ea223a14217 ] Similar to the way in which of_mdiobus_register() has a fallback to the non-DT based mdiobus_register() when CONFIG_OF is not set, we can create a shim for the device-managed devm_of_mdiobus_register() which calls devm_mdiobus_register() and discards the struct device_node *. In particular, this solves a build issue with the qca8k DSA driver which uses devm_of_mdiobus_register and can be compiled without CONFIG_OF. Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-19drm/virtio: Fix double free on probe failureXie Yongji1-0/+1
[ Upstream commit cec7f1774605a5ef47c134af62afe7c75c30b0ee ] The virtio_gpu_init() will free vgdev and vgdev->vbufs on failure. But such failure will be caught by virtio_gpu_probe() and then virtio_gpu_release() will be called to do some cleanup which will free vgdev and vgdev->vbufs again. So let's set dev->dev_private to NULL to avoid double free. Signed-off-by: Xie Yongji <xieyongji@bytedance.com> Link: http://patchwork.freedesktop.org/patch/msgid/20210517084913.403-2-xieyongji@bytedance.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-19reiserfs: add check for invalid 1st journal blockPavel Skripkin1-0/+14
[ Upstream commit a149127be52fa7eaf5b3681a0317a2bbb772d5a9 ] syzbot reported divide error in reiserfs. The problem was in incorrect journal 1st block. Syzbot's reproducer manualy generated wrong superblock with incorrect 1st block. In journal_init() wasn't any checks about this particular case. For example, if 1st journal block is before superblock 1st block, it can cause zeroing important superblock members in do_journal_end(). Link: https://lore.kernel.org/r/20210517121545.29645-1-paskripkin@gmail.com Reported-by: syzbot+0ba9909df31c6a36974d@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-19drm/bridge: lt9611: Add missing MODULE_DEVICE_TABLEZou Wei1-0/+1
[ Upstream commit 8d0b1fe81e18eb66a2d4406386760795fe0d77d9 ] This patch adds missing MODULE_DEVICE_TABLE definition which generates correct modalias for automatic loading of this driver when it is built as an external module. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zou Wei <zou_wei@huawei.com> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/1620801955-19188-1-git-send-email-zou_wei@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-19net: mdio: ipq8064: add regmap config to disable REGCACHEAnsuel Smith1-9/+24
[ Upstream commit b097bea10215315e8ee17f88b4c1bbb521b1878c ] mdio drivers should not use REGCHACHE. Also disable locking since it's handled by the mdio users and regmap is always accessed atomically. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-19drm/mediatek: Fix PM reference leak in mtk_crtc_ddp_hw_init()Wang Li1-1/+1
[ Upstream commit 69777e6ca396f0a7e1baff40fcad4a9d3d445b7a ] pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to putting operation will result in reference leak here. Fix it by replacing it with pm_runtime_resume_and_get to keep usage counter balanced. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Li <wangli74@huawei.com> Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-19net: Treat __napi_schedule_irqoff() as __napi_schedule() on PREEMPT_RTSebastian Andrzej Siewior1-2/+9
[ Upstream commit 8380c81d5c4fced6f4397795a5ae65758272bbfd ] __napi_schedule_irqoff() is an optimized version of __napi_schedule() which can be used where it is known that interrupts are disabled, e.g. in interrupt-handlers, spin_lock_irq() sections or hrtimer callbacks. On PREEMPT_RT enabled kernels this assumptions is not true. Force- threaded interrupt handlers and spinlocks are not disabling interrupts and the NAPI hrtimer callback is forced into softirq context which runs with interrupts enabled as well. Chasing all usage sites of __napi_schedule_irqoff() is a whack-a-mole game so make __napi_schedule_irqoff() invoke __napi_schedule() for PREEMPT_RT kernels. The callers of ____napi_schedule() in the networking core have been audited and are correct on PREEMPT_RT kernels as well. Reported-by: Juri Lelli <juri.lelli@redhat.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Juri Lelli <juri.lelli@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-19atm: nicstar: Fix possible use-after-free in nicstar_cleanup()Zou Wei1-1/+1
[ Upstream commit 34e7434ba4e97f4b85c1423a59b2922ba7dff2ea ] This module's remove path calls del_timer(). However, that function does not wait until the timer handler finishes. This means that the timer handler may still be running after the driver's remove function has finished, which would result in a use-after-free. Fix by calling del_timer_sync(), which makes sure the timer handler has finished, and unable to re-schedule itself. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zou Wei <zou_wei@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-08-19 17:29:36 +0000