summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-07-28bpf, sockmap, tcp: sk_prot needs inuse_idx set for proc statsJohn Fastabend1-1/+1
[ Upstream commit 228a4a7ba8e99bb9ef980b62f71e3be33f4aae69 ] The proc socket stats use sk_prot->inuse_idx value to record inuse sock stats. We currently do not set this correctly from sockmap side. The result is reading sock stats '/proc/net/sockstat' gives incorrect values. The socket counter is incremented correctly, but because we don't set the counter correctly when we replace sk_prot we may omit the decrement. To get the correct inuse_idx value move the core_initcall that initializes the TCP proto handlers to late_initcall. This way it is initialized after TCP has the chance to assign the inuse_idx value from the register protocol handler. Fixes: 604326b41a6fb ("bpf, sockmap: convert to generic sk_msg interface") Suggested-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Cong Wang <cong.wang@bytedance.com> Link: https://lore.kernel.org/bpf/20210712195546.423990-3-john.fastabend@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28bpf, sockmap: Fix potential memory leak on unlikely error caseJohn Fastabend1-5/+11
[ Upstream commit 7e6b27a69167f97c56b5437871d29e9722c3e470 ] If skb_linearize is needed and fails we could leak a msg on the error handling. To fix ensure we kfree the msg block before returning error. Found during code review. Fixes: 4363023d2668e ("bpf, sockmap: Avoid failures from skb_to_sgvec when skb has frag_list") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Cong Wang <cong.wang@bytedance.com> Link: https://lore.kernel.org/bpf/20210712195546.423990-2-john.fastabend@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28s390/bpf: Perform r1 range checking before accessing jit->seen_reg[r1]Colin Ian King1-1/+1
[ Upstream commit 91091656252f5d6d8c476e0c92776ce9fae7b445 ] Currently array jit->seen_reg[r1] is being accessed before the range checking of index r1. The range changing on r1 should be performed first since it will avoid any potential out-of-range accesses on the array seen_reg[] and also it is more optimal to perform checks on r1 before fetching data from the array. Fix this by swapping the order of the checks before the array access. Fixes: 054623105728 ("s390/bpf: Add s390x eBPF JIT compiler backend") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Ilya Leoshkevich <iii@linux.ibm.com> Acked-by: Ilya Leoshkevich <iii@linux.ibm.com> Link: https://lore.kernel.org/bpf/20210715125712.24690-1-colin.king@canonical.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28liquidio: Fix unintentional sign extension issue on left shift of u16Colin Ian King1-1/+1
[ Upstream commit e7efc2ce3d0789cd7c21b70ff00cd7838d382639 ] Shifting the u16 integer oct->pcie_port by CN23XX_PKT_INPUT_CTL_MAC_NUM_POS (29) bits will be promoted to a 32 bit signed int and then sign-extended to a u64. In the cases where oct->pcie_port where bit 2 is set (e.g. 3..7) the shifted value will be sign extended and the top 32 bits of the result will be set. Fix this by casting the u16 values to a u64 before the 29 bit left shift. Addresses-Coverity: ("Unintended sign extension") Fixes: 3451b97cce2d ("liquidio: CN23XX register setup") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28timers: Fix get_next_timer_interrupt() with no timers pendingNicolas Saenz Julienne1-3/+5
[ Upstream commit aebacb7f6ca1926918734faae14d1f0b6fae5cb7 ] 31cd0e119d50 ("timers: Recalculate next timer interrupt only when necessary") subtly altered get_next_timer_interrupt()'s behaviour. The function no longer consistently returns KTIME_MAX with no timers pending. In order to decide if there are any timers pending we check whether the next expiry will happen NEXT_TIMER_MAX_DELTA jiffies from now. Unfortunately, the next expiry time and the timer base clock are no longer updated in unison. The former changes upon certain timer operations (enqueue, expire, detach), whereas the latter keeps track of jiffies as they move forward. Ultimately breaking the logic above. A simplified example: - Upon entering get_next_timer_interrupt() with: jiffies = 1 base->clk = 0; base->next_expiry = NEXT_TIMER_MAX_DELTA; 'base->next_expiry == base->clk + NEXT_TIMER_MAX_DELTA', the function returns KTIME_MAX. - 'base->clk' is updated to the jiffies value. - The next time we enter get_next_timer_interrupt(), taking into account no timer operations happened: base->clk = 1; base->next_expiry = NEXT_TIMER_MAX_DELTA; 'base->next_expiry != base->clk + NEXT_TIMER_MAX_DELTA', the function returns a valid expire time, which is incorrect. This ultimately might unnecessarily rearm sched's timer on nohz_full setups, and add latency to the system[1]. So, introduce 'base->timers_pending'[2], update it every time 'base->next_expiry' changes, and use it in get_next_timer_interrupt(). [1] See tick_nohz_stop_tick(). [2] A quick pahole check on x86_64 and arm64 shows it doesn't make 'struct timer_base' any bigger. Fixes: 31cd0e119d50 ("timers: Recalculate next timer interrupt only when necessary") Signed-off-by: Nicolas Saenz Julienne <nsaenzju@redhat.com> Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28xdp, net: Fix use-after-free in bpf_xdp_link_releaseXuan Zhuo1-4/+10
[ Upstream commit 5acc7d3e8d342858405fbbc671221f676b547ce7 ] The problem occurs between dev_get_by_index() and dev_xdp_attach_link(). At this point, dev_xdp_uninstall() is called. Then xdp link will not be detached automatically when dev is released. But link->dev already points to dev, when xdp link is released, dev will still be accessed, but dev has been released. dev_get_by_index() | link->dev = dev | | rtnl_lock() | unregister_netdevice_many() | dev_xdp_uninstall() | rtnl_unlock() rtnl_lock(); | dev_xdp_attach_link() | rtnl_unlock(); | | netdev_run_todo() // dev released bpf_xdp_link_release() | /* access dev. | use-after-free */ | [ 45.966867] BUG: KASAN: use-after-free in bpf_xdp_link_release+0x3b8/0x3d0 [ 45.967619] Read of size 8 at addr ffff00000f9980c8 by task a.out/732 [ 45.968297] [ 45.968502] CPU: 1 PID: 732 Comm: a.out Not tainted 5.13.0+ #22 [ 45.969222] Hardware name: linux,dummy-virt (DT) [ 45.969795] Call trace: [ 45.970106] dump_backtrace+0x0/0x4c8 [ 45.970564] show_stack+0x30/0x40 [ 45.970981] dump_stack_lvl+0x120/0x18c [ 45.971470] print_address_description.constprop.0+0x74/0x30c [ 45.972182] kasan_report+0x1e8/0x200 [ 45.972659] __asan_report_load8_noabort+0x2c/0x50 [ 45.973273] bpf_xdp_link_release+0x3b8/0x3d0 [ 45.973834] bpf_link_free+0xd0/0x188 [ 45.974315] bpf_link_put+0x1d0/0x218 [ 45.974790] bpf_link_release+0x3c/0x58 [ 45.975291] __fput+0x20c/0x7e8 [ 45.975706] ____fput+0x24/0x30 [ 45.976117] task_work_run+0x104/0x258 [ 45.976609] do_notify_resume+0x894/0xaf8 [ 45.977121] work_pending+0xc/0x328 [ 45.977575] [ 45.977775] The buggy address belongs to the page: [ 45.978369] page:fffffc00003e6600 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x4f998 [ 45.979522] flags: 0x7fffe0000000000(node=0|zone=0|lastcpupid=0x3ffff) [ 45.980349] raw: 07fffe0000000000 fffffc00003e6708 ffff0000dac3c010 0000000000000000 [ 45.981309] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 [ 45.982259] page dumped because: kasan: bad access detected [ 45.982948] [ 45.983153] Memory state around the buggy address: [ 45.983753] ffff00000f997f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 45.984645] ffff00000f998000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 45.985533] >ffff00000f998080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 45.986419] ^ [ 45.987112] ffff00000f998100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 45.988006] ffff00000f998180: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 45.988895] ================================================================== [ 45.989773] Disabling lock debugging due to kernel taint [ 45.990552] Kernel panic - not syncing: panic_on_warn set ... [ 45.991166] CPU: 1 PID: 732 Comm: a.out Tainted: G B 5.13.0+ #22 [ 45.991929] Hardware name: linux,dummy-virt (DT) [ 45.992448] Call trace: [ 45.992753] dump_backtrace+0x0/0x4c8 [ 45.993208] show_stack+0x30/0x40 [ 45.993627] dump_stack_lvl+0x120/0x18c [ 45.994113] dump_stack+0x1c/0x34 [ 45.994530] panic+0x3a4/0x7d8 [ 45.994930] end_report+0x194/0x198 [ 45.995380] kasan_report+0x134/0x200 [ 45.995850] __asan_report_load8_noabort+0x2c/0x50 [ 45.996453] bpf_xdp_link_release+0x3b8/0x3d0 [ 45.997007] bpf_link_free+0xd0/0x188 [ 45.997474] bpf_link_put+0x1d0/0x218 [ 45.997942] bpf_link_release+0x3c/0x58 [ 45.998429] __fput+0x20c/0x7e8 [ 45.998833] ____fput+0x24/0x30 [ 45.999247] task_work_run+0x104/0x258 [ 45.999731] do_notify_resume+0x894/0xaf8 [ 46.000236] work_pending+0xc/0x328 [ 46.000697] SMP: stopping secondary CPUs [ 46.001226] Dumping ftrace buffer: [ 46.001663] (ftrace buffer empty) [ 46.002110] Kernel Offset: disabled [ 46.002545] CPU features: 0x00000001,23202c00 [ 46.003080] Memory Limit: none Fixes: aa8d3a716b59db6c ("bpf, xdp: Add bpf_link-based XDP attachment API") Reported-by: Abaci <abaci@linux.alibaba.com> Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Reviewed-by: Dust Li <dust.li@linux.alibaba.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20210710031635.41649-1-xuanzhuo@linux.alibaba.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28bpf: Fix tail_call_reachable rejection for interpreter when jit failedDaniel Borkmann1-0/+2
[ Upstream commit 5dd0a6b8582ffbfa88351949d50eccd5b6694ade ] During testing of f263a81451c1 ("bpf: Track subprog poke descriptors correctly and fix use-after-free") under various failure conditions, for example, when jit_subprogs() fails and tries to clean up the program to be run under the interpreter, we ran into the following freeze: [...] #127/8 tailcall_bpf2bpf_3:FAIL [...] [ 92.041251] BUG: KASAN: slab-out-of-bounds in ___bpf_prog_run+0x1b9d/0x2e20 [ 92.042408] Read of size 8 at addr ffff88800da67f68 by task test_progs/682 [ 92.043707] [ 92.044030] CPU: 1 PID: 682 Comm: test_progs Tainted: G O 5.13.0-53301-ge6c08cb33a30-dirty #87 [ 92.045542] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014 [ 92.046785] Call Trace: [ 92.047171] ? __bpf_prog_run_args64+0xc0/0xc0 [ 92.047773] ? __bpf_prog_run_args32+0x8b/0xb0 [ 92.048389] ? __bpf_prog_run_args64+0xc0/0xc0 [ 92.049019] ? ktime_get+0x117/0x130 [...] // few hundred [similar] lines more [ 92.659025] ? ktime_get+0x117/0x130 [ 92.659845] ? __bpf_prog_run_args64+0xc0/0xc0 [ 92.660738] ? __bpf_prog_run_args32+0x8b/0xb0 [ 92.661528] ? __bpf_prog_run_args64+0xc0/0xc0 [ 92.662378] ? print_usage_bug+0x50/0x50 [ 92.663221] ? print_usage_bug+0x50/0x50 [ 92.664077] ? bpf_ksym_find+0x9c/0xe0 [ 92.664887] ? ktime_get+0x117/0x130 [ 92.665624] ? kernel_text_address+0xf5/0x100 [ 92.666529] ? __kernel_text_address+0xe/0x30 [ 92.667725] ? unwind_get_return_address+0x2f/0x50 [ 92.668854] ? ___bpf_prog_run+0x15d4/0x2e20 [ 92.670185] ? ktime_get+0x117/0x130 [ 92.671130] ? __bpf_prog_run_args64+0xc0/0xc0 [ 92.672020] ? __bpf_prog_run_args32+0x8b/0xb0 [ 92.672860] ? __bpf_prog_run_args64+0xc0/0xc0 [ 92.675159] ? ktime_get+0x117/0x130 [ 92.677074] ? lock_is_held_type+0xd5/0x130 [ 92.678662] ? ___bpf_prog_run+0x15d4/0x2e20 [ 92.680046] ? ktime_get+0x117/0x130 [ 92.681285] ? __bpf_prog_run32+0x6b/0x90 [ 92.682601] ? __bpf_prog_run64+0x90/0x90 [ 92.683636] ? lock_downgrade+0x370/0x370 [ 92.684647] ? mark_held_locks+0x44/0x90 [ 92.685652] ? ktime_get+0x117/0x130 [ 92.686752] ? lockdep_hardirqs_on+0x79/0x100 [ 92.688004] ? ktime_get+0x117/0x130 [ 92.688573] ? __cant_migrate+0x2b/0x80 [ 92.689192] ? bpf_test_run+0x2f4/0x510 [ 92.689869] ? bpf_test_timer_continue+0x1c0/0x1c0 [ 92.690856] ? rcu_read_lock_bh_held+0x90/0x90 [ 92.691506] ? __kasan_slab_alloc+0x61/0x80 [ 92.692128] ? eth_type_trans+0x128/0x240 [ 92.692737] ? __build_skb+0x46/0x50 [ 92.693252] ? bpf_prog_test_run_skb+0x65e/0xc50 [ 92.693954] ? bpf_prog_test_run_raw_tp+0x2d0/0x2d0 [ 92.694639] ? __fget_light+0xa1/0x100 [ 92.695162] ? bpf_prog_inc+0x23/0x30 [ 92.695685] ? __sys_bpf+0xb40/0x2c80 [ 92.696324] ? bpf_link_get_from_fd+0x90/0x90 [ 92.697150] ? mark_held_locks+0x24/0x90 [ 92.698007] ? lockdep_hardirqs_on_prepare+0x124/0x220 [ 92.699045] ? finish_task_switch+0xe6/0x370 [ 92.700072] ? lockdep_hardirqs_on+0x79/0x100 [ 92.701233] ? finish_task_switch+0x11d/0x370 [ 92.702264] ? __switch_to+0x2c0/0x740 [ 92.703148] ? mark_held_locks+0x24/0x90 [ 92.704155] ? __x64_sys_bpf+0x45/0x50 [ 92.705146] ? do_syscall_64+0x35/0x80 [ 92.706953] ? entry_SYSCALL_64_after_hwframe+0x44/0xae [...] Turns out that the program rejection from e411901c0b77 ("bpf: allow for tailcalls in BPF subprograms for x64 JIT") is buggy since env->prog->aux->tail_call_reachable is never true. Commit ebf7d1f508a7 ("bpf, x64: rework pro/epilogue and tailcall handling in JIT") added a tracker into check_max_stack_depth() which propagates the tail_call_reachable condition throughout the subprograms. This info is then assigned to the subprogram's func[i]->aux->tail_call_reachable. However, in the case of the rejection check upon JIT failure, env->prog->aux->tail_call_reachable is used. func[0]->aux->tail_call_reachable which represents the main program's information did not propagate this to the outer env->prog->aux, though. Add this propagation into check_max_stack_depth() where it needs to belong so that the check can be done reliably. Fixes: ebf7d1f508a7 ("bpf, x64: rework pro/epilogue and tailcall handling in JIT") Fixes: e411901c0b77 ("bpf: allow for tailcalls in BPF subprograms for x64 JIT") Co-developed-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/bpf/618c34e3163ad1a36b1e82377576a6081e182f25.1626123173.git.daniel@iogearbox.net Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28bpf, test: fix NULL pointer dereference on invalid expected_attach_typeXuan Zhuo1-0/+3
[ Upstream commit 5e21bb4e812566aef86fbb77c96a4ec0782286e4 ] These two types of XDP progs (BPF_XDP_DEVMAP, BPF_XDP_CPUMAP) will not be executed directly in the driver, therefore we should also not directly run them from here. To run in these two situations, there must be further preparations done, otherwise these may cause a kernel panic. For more details, see also dev_xdp_attach(). [ 46.982479] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 46.984295] #PF: supervisor read access in kernel mode [ 46.985777] #PF: error_code(0x0000) - not-present page [ 46.987227] PGD 800000010dca4067 P4D 800000010dca4067 PUD 10dca6067 PMD 0 [ 46.989201] Oops: 0000 [#1] SMP PTI [ 46.990304] CPU: 7 PID: 562 Comm: a.out Not tainted 5.13.0+ #44 [ 46.992001] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/24 [ 46.995113] RIP: 0010:___bpf_prog_run+0x17b/0x1710 [ 46.996586] Code: 49 03 14 cc e8 76 f6 fe ff e9 ad fe ff ff 0f b6 43 01 48 0f bf 4b 02 48 83 c3 08 89 c2 83 e0 0f c0 ea 04 02 [ 47.001562] RSP: 0018:ffffc900005afc58 EFLAGS: 00010246 [ 47.003115] RAX: 0000000000000000 RBX: ffffc9000023f068 RCX: 0000000000000000 [ 47.005163] RDX: 0000000000000000 RSI: 0000000000000079 RDI: ffffc900005afc98 [ 47.007135] RBP: 0000000000000000 R08: ffffc9000023f048 R09: c0000000ffffdfff [ 47.009171] R10: 0000000000000001 R11: ffffc900005afb40 R12: ffffc900005afc98 [ 47.011172] R13: 0000000000000001 R14: 0000000000000001 R15: ffffffff825258a8 [ 47.013244] FS: 00007f04a5207580(0000) GS:ffff88842fdc0000(0000) knlGS:0000000000000000 [ 47.015705] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 47.017475] CR2: 0000000000000000 CR3: 0000000100182005 CR4: 0000000000770ee0 [ 47.019558] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 47.021595] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 47.023574] PKRU: 55555554 [ 47.024571] Call Trace: [ 47.025424] __bpf_prog_run32+0x32/0x50 [ 47.026296] ? printk+0x53/0x6a [ 47.027066] ? ktime_get+0x39/0x90 [ 47.027895] bpf_test_run.cold.28+0x23/0x123 [ 47.028866] ? printk+0x53/0x6a [ 47.029630] bpf_prog_test_run_xdp+0x149/0x1d0 [ 47.030649] __sys_bpf+0x1305/0x23d0 [ 47.031482] __x64_sys_bpf+0x17/0x20 [ 47.032316] do_syscall_64+0x3a/0x80 [ 47.033165] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 47.034254] RIP: 0033:0x7f04a51364dd [ 47.035133] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 48 [ 47.038768] RSP: 002b:00007fff8f9fc518 EFLAGS: 00000213 ORIG_RAX: 0000000000000141 [ 47.040344] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f04a51364dd [ 47.041749] RDX: 0000000000000048 RSI: 0000000020002a80 RDI: 000000000000000a [ 47.043171] RBP: 00007fff8f9fc530 R08: 0000000002049300 R09: 0000000020000100 [ 47.044626] R10: 0000000000000004 R11: 0000000000000213 R12: 0000000000401070 [ 47.046088] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 47.047579] Modules linked in: [ 47.048318] CR2: 0000000000000000 [ 47.049120] ---[ end trace 7ad34443d5be719a ]--- [ 47.050273] RIP: 0010:___bpf_prog_run+0x17b/0x1710 [ 47.051343] Code: 49 03 14 cc e8 76 f6 fe ff e9 ad fe ff ff 0f b6 43 01 48 0f bf 4b 02 48 83 c3 08 89 c2 83 e0 0f c0 ea 04 02 [ 47.054943] RSP: 0018:ffffc900005afc58 EFLAGS: 00010246 [ 47.056068] RAX: 0000000000000000 RBX: ffffc9000023f068 RCX: 0000000000000000 [ 47.057522] RDX: 0000000000000000 RSI: 0000000000000079 RDI: ffffc900005afc98 [ 47.058961] RBP: 0000000000000000 R08: ffffc9000023f048 R09: c0000000ffffdfff [ 47.060390] R10: 0000000000000001 R11: ffffc900005afb40 R12: ffffc900005afc98 [ 47.061803] R13: 0000000000000001 R14: 0000000000000001 R15: ffffffff825258a8 [ 47.063249] FS: 00007f04a5207580(0000) GS:ffff88842fdc0000(0000) knlGS:0000000000000000 [ 47.065070] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 47.066307] CR2: 0000000000000000 CR3: 0000000100182005 CR4: 0000000000770ee0 [ 47.067747] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 47.069217] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 47.070652] PKRU: 55555554 [ 47.071318] Kernel panic - not syncing: Fatal exception [ 47.072854] Kernel Offset: disabled [ 47.073683] ---[ end Kernel panic - not syncing: Fatal exception ]--- Fixes: 9216477449f3 ("bpf: cpumap: Add the possibility to attach an eBPF program to cpumap") Fixes: fbee97feed9b ("bpf: Add support to attach bpf program to a devmap entry") Reported-by: Abaci <abaci@linux.alibaba.com> Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Dust Li <dust.li@linux.alibaba.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: David Ahern <dsahern@kernel.org> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20210708080409.73525-1-xuanzhuo@linux.alibaba.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28ASoC: rt5631: Fix regcache sync errors on resumeMaxim Schwalm1-0/+2
[ Upstream commit c71f78a662611fe2c67f3155da19b0eff0f29762 ] The ALC5631 does not like multi-write accesses, avoid them. This fixes: rt5631 4-001a: Unable to sync registers 0x3a-0x3c. -121 errors on resume from suspend (and all registers after the registers in the error not being synced). Inspired by commit 2d30e9494f1e ("ASoC: rt5651: Fix regcache sync errors on resume") from Hans de Geode, which fixed the same errors on ALC5651. Signed-off-by: Maxim Schwalm <maxim.schwalm@gmail.com> Link: https://lore.kernel.org/r/20210712005011.28536-1-digetx@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28spi: mediatek: fix fifo rx modePeter Hess1-3/+13
[ Upstream commit 3a70dd2d050331ee4cf5ad9d5c0a32d83ead9a43 ] In FIFO mode were two problems: - RX mode was never handled and - in this case the tx_buf pointer was NULL and caused an exception fix this by handling RX mode in mtk_spi_fifo_transfer Fixes: a568231f4632 ("spi: mediatek: Add spi bus for Mediatek MT8173") Signed-off-by: Peter Hess <peter.hess@ph-home.de> Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Link: https://lore.kernel.org/r/20210706121609.680534-1-linux@fw-web.de Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28regulator: hi6421: Fix getting wrong drvdataAxel Lin1-9/+13
[ Upstream commit 1c73daee4bf30ccdff5e86dc400daa6f74735da5 ] Since config.dev = pdev->dev.parent in current code, so dev_get_drvdata(rdev->dev.parent) call in hi6421_regulator_enable returns the drvdata of the mfd device rather than the regulator. Fix it. This was broken while converting to use simplified DT parsing because the config.dev changed from pdev->dev to pdev->dev.parent for parsing the parent's of_node. Fixes: 29dc269a85ef ("regulator: hi6421: Convert to use simplified DT parsing") Signed-off-by: Axel Lin <axel.lin@ingics.com> Link: https://lore.kernel.org/r/20210630095959.2411543-1-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28regulator: hi6421: Use correct variable type for regmap api val argumentAxel Lin1-4/+4
[ Upstream commit ae60e6a9d24e89a74e2512204ad04de94921bdd2 ] Use unsigned int instead of u32 for regmap_read/regmap_update_bits val argument. Signed-off-by: Axel Lin <axel.lin@ingics.com> Link: https://lore.kernel.org/r/20210619124133.4096683-1-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28spi: stm32: fixes pm_runtime calls in probe/removeAlain Volmat1-1/+8
[ Upstream commit 7999d2555c9f879d006ea8469d74db9cdb038af0 ] Add pm_runtime calls in probe/probe error path and remove in order to be consistent in all places in ordering and ensure that pm_runtime is disabled prior to resources used by the SPI controller. This patch also fixes the 2 following warnings on driver remove: WARNING: CPU: 0 PID: 743 at drivers/clk/clk.c:594 clk_core_disable_lock+0x18/0x24 WARNING: CPU: 0 PID: 743 at drivers/clk/clk.c:476 clk_unprepare+0x24/0x2c Fixes: 038ac869c9d2 ("spi: stm32: add runtime PM support") Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Link: https://lore.kernel.org/r/1625646426-5826-2-git-send-email-alain.volmat@foss.st.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28spi: imx: add a check for speed_hz before calculating the clockClark Wang1-16/+21
[ Upstream commit 4df2f5e1372e9eec8f9e1b4a3025b9be23487d36 ] When some drivers use spi to send data, spi_transfer->speed_hz is not assigned. If spidev->max_speed_hz is not assigned as well, it will cause an error in configuring the clock. Add a check for these two values before configuring the clock. An error will be returned when they are not assigned. Signed-off-by: Clark Wang <xiaoning.wang@nxp.com> Link: https://lore.kernel.org/r/20210408103347.244313-2-xiaoning.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28ASoC: wm_adsp: Correct wm_coeff_tlv_get handlingCharles Keepax1-1/+1
[ Upstream commit dd6fb8ff2210f74b056bf9234d0605e8c26a8ac0 ] When wm_coeff_tlv_get was updated it was accidentally switch to the _raw version of the helper causing it to ignore the current DSP state it should be checking. Switch the code back to the correct helper so that users can't read the controls when they arn't available. Fixes: 73ecf1a673d3 ("ASoC: wm_adsp: Correct cache handling of new kernel control API") Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210626155941.12251-1-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28perf sched: Fix record failure when CONFIG_SCHEDSTATS is not setYang Jihong1-4/+29
[ Upstream commit b0f008551f0bf4d5f6db9b5f0e071b02790d6a2e ] The tracepoints trace_sched_stat_{wait, sleep, iowait} are not exposed to user if CONFIG_SCHEDSTATS is not set, "perf sched record" records the three events. As a result, the command fails. Before: #perf sched record sleep 1 event syntax error: 'sched:sched_stat_wait' \___ unknown tracepoint Error: File /sys/kernel/tracing/events/sched/sched_stat_wait not found. Hint: Perhaps this kernel misses some CONFIG_ setting to enable this feature?. Run 'perf list' for a list of valid events Usage: perf record [<options>] [<command>] or: perf record [<options>] -- <command> [<options>] -e, --event <event> event selector. use 'perf list' to list available events Solution: Check whether schedstat tracepoints are exposed. If no, these events are not recorded. After: # perf sched record sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.163 MB perf.data (1091 samples) ] # perf sched report run measurement overhead: 4736 nsecs sleep measurement overhead: 9059979 nsecs the run test took 999854 nsecs the sleep test took 8945271 nsecs nr_run_events: 716 nr_sleep_events: 785 nr_wakeup_events: 0 ... ------------------------------------------------------------ Fixes: 2a09b5de235a6 ("sched/fair: do not expose some tracepoints to user if CONFIG_SCHEDSTATS is not set") Signed-off-by: Yang Jihong <yangjihong1@huawei.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Yafang Shao <laoar.shao@gmail.com> Link: http://lore.kernel.org/lkml/20210713112358.194693-1-yangjihong1@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28perf data: Close all files in close_dir()Riccardo Mancini1-1/+1
[ Upstream commit d4b3eedce151e63932ce4a00f1d0baa340a8b907 ] When using 'perf report' in directory mode, the first file is not closed on exit, causing a memory leak. The problem is caused by the iterating variable never reaching 0. Fixes: 145520631130bd64 ("perf data: Add perf_data__(create_dir|close_dir) functions") Signed-off-by: Riccardo Mancini <rickyman7@gmail.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Zhen Lei <thunder.leizhen@huawei.com> Link: http://lore.kernel.org/lkml/20210716141122.858082-1-rickyman7@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28perf probe-file: Delete namelist in del_events() on the error pathRiccardo Mancini1-2/+2
[ Upstream commit e0fa7ab42232e742dcb3de9f3c1f6127b5adc019 ] ASan reports some memory leaks when running: # perf test "42: BPF filter" This second leak is caused by a strlist not being dellocated on error inside probe_file__del_events. This patch adds a goto label before the deallocation and makes the error path jump to it. Signed-off-by: Riccardo Mancini <rickyman7@gmail.com> Fixes: e7895e422e4da63d ("perf probe: Split del_perf_probe_events()") Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/174963c587ae77fa108af794669998e4ae558338.1626343282.git.rickyman7@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28perf lzma: Close lzma stream on exitRiccardo Mancini1-3/+5
[ Upstream commit f8cbb0f926ae1e1fb5f9e51614e5437560ed4039 ] ASan reports memory leaks when running: # perf test "88: Check open filename arg using perf trace + vfs_getname" One of these is caused by the lzma stream never being closed inside lzma_decompress_to_file(). This patch adds the missing lzma_end(). Signed-off-by: Riccardo Mancini <rickyman7@gmail.com> Fixes: 80a32e5b498a7547 ("perf tools: Add lzma decompression support for kernel module") Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/aaf50bdce7afe996cfc06e1bbb36e4a2a9b9db93.1626343282.git.rickyman7@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28perf script: Fix memory 'threads' and 'cpus' leaks on exitRiccardo Mancini1-0/+7
[ Upstream commit faf3ac305d61341c74e5cdd9e41daecce7f67bfe ] ASan reports several memory leaks while running: # perf test "82: Use vfs_getname probe to get syscall args filenames" Two of these are caused by some refcounts not being decreased on perf-script exit, namely script.threads and script.cpus. This patch adds the missing __put calls in a new perf_script__exit function, which is called at the end of cmd_script. This patch concludes the fixes of all remaining memory leaks in perf test "82: Use vfs_getname probe to get syscall args filenames". Signed-off-by: Riccardo Mancini <rickyman7@gmail.com> Fixes: cfc8874a48599249 ("perf script: Process cpu/threads maps") Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/5ee73b19791c6fa9d24c4d57f4ac1a23609400d7.1626343282.git.rickyman7@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28perf report: Free generated help strings for sort optionRiccardo Mancini3-13/+24
[ Upstream commit a37338aad8c4d8676173ead14e881d2ec308155c ] ASan reports the memory leak of the strings allocated by sort_help() when running perf report. This patch changes the returned pointer to char* (instead of const char*), saves it in a temporary variable, and finally deallocates it at function exit. Signed-off-by: Riccardo Mancini <rickyman7@gmail.com> Fixes: 702fb9b415e7c99b ("perf report: Show all sort keys in help output") Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/a38b13f02812a8a6759200b9063c6191337f44d4.1626343282.git.rickyman7@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28perf env: Fix memory leak of cpu_pmu_capsRiccardo Mancini1-0/+1
[ Upstream commit da6b7c6c0626901428245f65712385805e42eba6 ] ASan reports memory leaks while running: # perf test "83: Zstd perf.data compression/decompression" The first of the leaks is caused by env->cpu_pmu_caps not being freed. This patch adds the missing (z)free inside perf_env__exit. Signed-off-by: Riccardo Mancini <rickyman7@gmail.com> Fixes: 6f91ea283a1ed23e ("perf header: Support CPU PMU capabilities") Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/6ba036a8220156ec1f3d6be3e5d25920f6145028.1626343282.git.rickyman7@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28perf test maps__merge_in: Fix memory leak of mapsRiccardo Mancini1-0/+2
[ Upstream commit 244d1797c8c8e850b8de7992af713aa5c70d5650 ] ASan reports a memory leak when running: # perf test "65: maps__merge_in" This is the second and final patch addressing these memory leaks. This time, the problem is simply that the maps object is never destructed. This patch adds the missing maps__exit call. Signed-off-by: Riccardo Mancini <rickyman7@gmail.com> Fixes: 79b6bb73f888933c ("perf maps: Merge 'struct maps' with 'struct map_groups'") Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/a1a29b97a58738987d150e94d4ebfad0282fb038.1626343282.git.rickyman7@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28perf dso: Fix memory leak in dso__new_map()Riccardo Mancini1-1/+3
[ Upstream commit 581e295a0f6b5c2931d280259fbbfff56959faa9 ] ASan reports a memory leak when running: # perf test "65: maps__merge_in". The causes of the leaks are two, this patch addresses only the first one, which is related to dso__new_map(). The bug is that dso__new_map() creates a new dso but never decreases the refcount it gets from creating it. This patch adds the missing dso__put(). Signed-off-by: Riccardo Mancini <rickyman7@gmail.com> Fixes: d3a7c489c7fd2463 ("perf tools: Reference count struct dso") Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/60bfe0cd06e89e2ca33646eb8468d7f5de2ee597.1626343282.git.rickyman7@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28perf test event_update: Fix memory leak of evlistRiccardo Mancini1-1/+1
[ Upstream commit fc56f54f6fcd5337634f4545af6459613129b432 ] ASan reports a memory leak when running: # perf test "49: Synthesize attr update" Caused by evlist not being deleted. This patch adds the missing evlist__delete and removes the perf_cpu_map__put since it's already being deleted by evlist__delete. Signed-off-by: Riccardo Mancini <rickyman7@gmail.com> Fixes: a6e5281780d1da65 ("perf tools: Add event_update event unit type") Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/f7994ad63d248f7645f901132d208fadf9f2b7e4.1626343282.git.rickyman7@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28perf test session_topology: Delete session->evlistRiccardo Mancini1-0/+1
[ Upstream commit 233f2dc1c284337286f9a64c0152236779a42f6c ] ASan reports a memory leak related to session->evlist while running: # perf test "41: Session topology". When perf_data is in write mode, session->evlist is owned by the caller, which should also take care of deleting it. This patch adds the missing evlist__delete(). Signed-off-by: Riccardo Mancini <rickyman7@gmail.com> Fixes: c84974ed9fb67293 ("perf test: Add entry to test cpu topology") Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/822f741f06eb25250fb60686cf30a35f447e9e91.1626343282.git.rickyman7@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28perf env: Fix sibling_dies memory leakRiccardo Mancini1-0/+1
[ Upstream commit 42db3d9ded555f7148b5695109a7dc8d66f0dde4 ] ASan reports a memory leak in perf_env while running: # perf test "41: Session topology" Caused by sibling_dies not being freed. This patch adds the required free. Fixes: acae8b36cded0ee6 ("perf header: Add die information in CPU topology") Signed-off-by: Riccardo Mancini <rickyman7@gmail.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/2140d0b57656e4eb9021ca9772250c24c032924b.1626343282.git.rickyman7@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28perf probe: Fix dso->nsinfo refcountingRiccardo Mancini1-1/+3
[ Upstream commit dedeb4be203b382ba7245d13079bc3b0f6d40c65 ] ASan reports a memory leak of nsinfo during the execution of: # perf test "31: Lookup mmap thread". The leak is caused by a refcounted variable being replaced without dropping the refcount. This patch makes sure that the refcnt of nsinfo is decreased whenever a refcounted variable is replaced with a new value. Signed-off-by: Riccardo Mancini <rickyman7@gmail.com> Fixes: 544abd44c7064c8a ("perf probe: Allow placing uprobes in alternate namespaces.") Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Krister Johansen <kjlx@templeofstupid.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/55223bc8821b34ccb01f92ef1401c02b6a32e61f.1626343282.git.rickyman7@gmail.com [ Split from a larger patch ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28perf map: Fix dso->nsinfo refcountingRiccardo Mancini1-0/+2
[ Upstream commit 2d6b74baa7147251c30a46c4996e8cc224aa2dc5 ] ASan reports a memory leak of nsinfo during the execution of # perf test "31: Lookup mmap thread" The leak is caused by a refcounted variable being replaced without dropping the refcount. This patch makes sure that the refcnt of nsinfo is decreased whenever a refcounted variable is replaced with a new value. Signed-off-by: Riccardo Mancini <rickyman7@gmail.com> Fixes: bf2e710b3cb8445c ("perf maps: Lookup maps in both intitial mountns and inner mountns.") Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Krister Johansen <kjlx@templeofstupid.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/55223bc8821b34ccb01f92ef1401c02b6a32e61f.1626343282.git.rickyman7@gmail.com [ Split from a larger patch ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28perf inject: Fix dso->nsinfo refcountingRiccardo Mancini1-2/+3
[ Upstream commit 0967ebffe098157180a0bbd180ac90348c6e07d7 ] ASan reports a memory leak of nsinfo during the execution of: # perf test "31: Lookup mmap thread" The leak is caused by a refcounted variable being replaced without dropping the refcount. This patch makes sure that the refcnt of nsinfo is decreased when a refcounted variable is replaced with a new value. Signed-off-by: Riccardo Mancini <rickyman7@gmail.com> Fixes: 27c9c3424fc217da ("perf inject: Add --buildid-all option") Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/55223bc8821b34ccb01f92ef1401c02b6a32e61f.1626343282.git.rickyman7@gmail.com [ Split from a larger patch ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28KVM: x86/pmu: Clear anythread deprecated bit when 0xa leaf is unsupported on ↵Like Xu1-1/+2
the SVM [ Upstream commit 7234c362ccb3c2228f06f19f93b132de9cfa7ae4 ] The AMD platform does not support the functions Ah CPUID leaf. The returned results for this entry should all remain zero just like the native does: AMD host: 0x0000000a 0x00: eax=0x00000000 ebx=0x00000000 ecx=0x00000000 edx=0x00000000 (uncanny) AMD guest: 0x0000000a 0x00: eax=0x00000000 ebx=0x00000000 ecx=0x00000000 edx=0x00008000 Fixes: cadbaa039b99 ("perf/x86/intel: Make anythread filter support conditional") Signed-off-by: Like Xu <likexu@tencent.com> Message-Id: <20210628074354.33848-1-likexu@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28nvme-pci: do not call nvme_dev_remove_admin from nvme_removeCasey Chen1-1/+0
[ Upstream commit 251ef6f71be2adfd09546a26643426fe62585173 ] nvme_dev_remove_admin could free dev->admin_q and the admin_tagset while they are being accessed by nvme_dev_disable(), which can be called by nvme_reset_work via nvme_remove_dead_ctrl. Commit cb4bfda62afa ("nvme-pci: fix hot removal during error handling") intended to avoid requests being stuck on a removed controller by killing the admin queue. But the later fix c8e9e9b7646e ("nvme-pci: unquiesce admin queue on shutdown"), together with nvme_dev_disable(dev, true) right before nvme_dev_remove_admin() could help dispatch requests and fail them early, so we don't need nvme_dev_remove_admin() any more. Fixes: cb4bfda62afa ("nvme-pci: fix hot removal during error handling") Signed-off-by: Casey Chen <cachen@purestorage.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28mptcp: fix warning in __skb_flow_dissect() when do syn cookie for subflow joinJianguo Wu1-1/+15
[ Upstream commit 0c71929b5893e410e0efbe1bbeca6f19a5f19956 ] I did stress test with wrk[1] and webfsd[2] with the assistance of mptcp-tools[3]: Server side: ./use_mptcp.sh webfsd -4 -R /tmp/ -p 8099 Client side: ./use_mptcp.sh wrk -c 200 -d 30 -t 4 http://192.168.174.129:8099/ and got the following warning message: [ 55.552626] TCP: request_sock_subflow: Possible SYN flooding on port 8099. Sending cookies. Check SNMP counters. [ 55.553024] ------------[ cut here ]------------ [ 55.553027] WARNING: CPU: 0 PID: 10 at net/core/flow_dissector.c:984 __skb_flow_dissect+0x280/0x1650 ... [ 55.553117] CPU: 0 PID: 10 Comm: ksoftirqd/0 Not tainted 5.12.0+ #18 [ 55.553121] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 02/27/2020 [ 55.553124] RIP: 0010:__skb_flow_dissect+0x280/0x1650 ... [ 55.553133] RSP: 0018:ffffb79580087770 EFLAGS: 00010246 [ 55.553137] RAX: 0000000000000000 RBX: ffffffff8ddb58e0 RCX: ffffb79580087888 [ 55.553139] RDX: ffffffff8ddb58e0 RSI: ffff8f7e4652b600 RDI: 0000000000000000 [ 55.553141] RBP: ffffb79580087858 R08: 0000000000000000 R09: 0000000000000008 [ 55.553143] R10: 000000008c622965 R11: 00000000d3313a5b R12: ffff8f7e4652b600 [ 55.553146] R13: ffff8f7e465c9062 R14: 0000000000000000 R15: ffffb79580087888 [ 55.553149] FS: 0000000000000000(0000) GS:ffff8f7f75e00000(0000) knlGS:0000000000000000 [ 55.553152] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 55.553154] CR2: 00007f73d1d19000 CR3: 0000000135e10004 CR4: 00000000003706f0 [ 55.553160] Call Trace: [ 55.553166] ? __sha256_final+0x67/0xd0 [ 55.553173] ? sha256+0x7e/0xa0 [ 55.553177] __skb_get_hash+0x57/0x210 [ 55.553182] subflow_init_req_cookie_join_save+0xac/0xc0 [ 55.553189] subflow_check_req+0x474/0x550 [ 55.553195] ? ip_route_output_key_hash+0x67/0x90 [ 55.553200] ? xfrm_lookup_route+0x1d/0xa0 [ 55.553207] subflow_v4_route_req+0x8e/0xd0 [ 55.553212] tcp_conn_request+0x31e/0xab0 [ 55.553218] ? selinux_socket_sock_rcv_skb+0x116/0x210 [ 55.553224] ? tcp_rcv_state_process+0x179/0x6d0 [ 55.553229] tcp_rcv_state_process+0x179/0x6d0 [ 55.553235] tcp_v4_do_rcv+0xaf/0x220 [ 55.553239] tcp_v4_rcv+0xce4/0xd80 [ 55.553243] ? ip_route_input_rcu+0x246/0x260 [ 55.553248] ip_protocol_deliver_rcu+0x35/0x1b0 [ 55.553253] ip_local_deliver_finish+0x44/0x50 [ 55.553258] ip_local_deliver+0x6c/0x110 [ 55.553262] ? ip_rcv_finish_core.isra.19+0x5a/0x400 [ 55.553267] ip_rcv+0xd1/0xe0 ... After debugging, I found in __skb_flow_dissect(), skb->dev and skb->sk are both NULL, then net is NULL, and trigger WARN_ON_ONCE(!net), actually net is always NULL in this code path, as skb->dev is set to NULL in tcp_v4_rcv(), and skb->sk is never set. Code snippet in __skb_flow_dissect() that trigger warning: 975 if (skb) { 976 if (!net) { 977 if (skb->dev) 978 net = dev_net(skb->dev); 979 else if (skb->sk) 980 net = sock_net(skb->sk); 981 } 982 } 983 984 WARN_ON_ONCE(!net); So, using seq and transport header derived hash. [1] https://github.com/wg/wrk [2] https://github.com/ourway/webfsd [3] https://github.com/pabeni/mptcp-tools Fixes: 9466a1ccebbe ("mptcp: enable JOIN requests even if cookies are in use") Suggested-by: Paolo Abeni <pabeni@redhat.com> Suggested-by: Florian Westphal <fw@strlen.de> Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28cxgb4: fix IRQ free race during driver unloadShahjada Abul Husain2-8/+13
[ Upstream commit 015fe6fd29c4b9ac0f61b8c4455ef88e6018b9cc ] IRQs are requested during driver's ndo_open() and then later freed up in disable_interrupts() during driver unload. A race exists where driver can set the CXGB4_FULL_INIT_DONE flag in ndo_open() after the disable_interrupts() in driver unload path checks it, and hence misses calling free_irq(). Fix by unregistering netdevice first and sync with driver's ndo_open(). This ensures disable_interrupts() c