summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-08-12USB: usbtmc: Fix RCU stall warningQiang.zhang1-8/+1
commit 30fad76ce4e98263edfa8f885c81d5426c1bf169 upstream. rcu: INFO: rcu_preempt self-detected stall on CPU rcu: 1-...!: (2 ticks this GP) idle=d92/1/0x4000000000000000 softirq=25390/25392 fqs=3 (t=12164 jiffies g=31645 q=43226) rcu: rcu_preempt kthread starved for 12162 jiffies! g31645 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x0 ->cpu=0 rcu: Unless rcu_preempt kthread gets sufficient CPU time, OOM is now expected behavior. rcu: RCU grace-period kthread stack dump: task:rcu_preempt state:R running task ........... usbtmc 3-1:0.0: unknown status received: -71 usbtmc 3-1:0.0: unknown status received: -71 usbtmc 3-1:0.0: unknown status received: -71 usbtmc 3-1:0.0: unknown status received: -71 usbtmc 3-1:0.0: unknown status received: -71 usbtmc 3-1:0.0: unknown status received: -71 usbtmc 3-1:0.0: unknown status received: -71 usbtmc 3-1:0.0: unknown status received: -71 usbtmc 3-1:0.0: usb_submit_urb failed: -19 The function usbtmc_interrupt() resubmits urbs when the error status of an urb is -EPROTO. In systems using the dummy_hcd usb controller this can result in endless interrupt loops when the usbtmc device is disconnected from the host system. Since host controller drivers already try to recover from transmission errors, there is no need to resubmit the urb or try other solutions to repair the error situation. In case of errors the INT pipe just stops to wait for further packets. Fixes: dbf3e7f654c0 ("Implement an ioctl to support the USMTMC-USB488 READ_STATUS_BYTE operation") Cc: stable@vger.kernel.org Reported-by: syzbot+e2eae5639e7203360018@syzkaller.appspotmail.com Signed-off-by: Qiang.zhang <qiang.zhang@windriver.com> Acked-by: Guido Kiener <guido.kiener@rohde-schwarz.com> Link: https://lore.kernel.org/r/20210723004334.458930-1-qiang.zhang@windriver.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-12Bluetooth: defer cleanup of resources in hci_unregister_dev()Tetsuo Handa4-24/+45
[ Upstream commit e04480920d1eec9c061841399aa6f35b6f987d8b ] syzbot is hitting might_sleep() warning at hci_sock_dev_event() due to calling lock_sock() with rw spinlock held [1]. It seems that history of this locking problem is a trial and error. Commit b40df5743ee8 ("[PATCH] bluetooth: fix socket locking in hci_sock_dev_event()") in 2.6.21-rc4 changed bh_lock_sock() to lock_sock() as an attempt to fix lockdep warning. Then, commit 4ce61d1c7a8e ("[BLUETOOTH]: Fix locking in hci_sock_dev_event().") in 2.6.22-rc2 changed lock_sock() to local_bh_disable() + bh_lock_sock_nested() as an attempt to fix the sleep in atomic context warning. Then, commit 4b5dd696f81b ("Bluetooth: Remove local_bh_disable() from hci_sock.c") in 3.3-rc1 removed local_bh_disable(). Then, commit e305509e678b ("Bluetooth: use correct lock to prevent UAF of hdev object") in 5.13-rc5 again changed bh_lock_sock_nested() to lock_sock() as an attempt to fix CVE-2021-3573. This difficulty comes from current implementation that hci_sock_dev_event(HCI_DEV_UNREG) is responsible for dropping all references from sockets because hci_unregister_dev() immediately reclaims resources as soon as returning from hci_sock_dev_event(HCI_DEV_UNREG). But the history suggests that hci_sock_dev_event(HCI_DEV_UNREG) was not doing what it should do. Therefore, instead of trying to detach sockets from device, let's accept not detaching sockets from device at hci_sock_dev_event(HCI_DEV_UNREG), by moving actual cleanup of resources from hci_unregister_dev() to hci_cleanup_dev() which is called by bt_host_release() when all references to this unregistered device (which is a kobject) are gone. Since hci_sock_dev_event(HCI_DEV_UNREG) no longer resets hci_pi(sk)->hdev, we need to check whether this device was unregistered and return an error based on HCI_UNREGISTER flag. There might be subtle behavioral difference in "monitor the hdev" functionality; please report if you found something went wrong due to this patch. Link: https://syzkaller.appspot.com/bug?extid=a5df189917e79d5e59c9 [1] Reported-by: syzbot <syzbot+a5df189917e79d5e59c9@syzkaller.appspotmail.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Fixes: e305509e678b ("Bluetooth: use correct lock to prevent UAF of hdev object") Acked-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12blk-iolatency: error out if blk_get_queue() failed in iolatency_set_limit()Yu Kuai1-1/+5
[ Upstream commit 8d75d0eff6887bcac7225e12b9c75595e523d92d ] If queue is dying while iolatency_set_limit() is in progress, blk_get_queue() won't increment the refcount of the queue. However, blk_put_queue() will still decrement the refcount later, which will cause the refcout to be unbalanced. Thus error out in such case to fix the problem. Fixes: 8c772a9bfc7c ("blk-iolatency: fix IO hang due to negative inflight counter") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Acked-by: Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/20210805124645.543797-1-yukuai3@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12net: vxge: fix use-after-free in vxge_device_unregisterPavel Skripkin1-3/+3
[ Upstream commit 942e560a3d3862dd5dee1411dbdd7097d29b8416 ] Smatch says: drivers/net/ethernet/neterion/vxge/vxge-main.c:3518 vxge_device_unregister() error: Using vdev after free_{netdev,candev}(dev); drivers/net/ethernet/neterion/vxge/vxge-main.c:3518 vxge_device_unregister() error: Using vdev after free_{netdev,candev}(dev); drivers/net/ethernet/neterion/vxge/vxge-main.c:3520 vxge_device_unregister() error: Using vdev after free_{netdev,candev}(dev); drivers/net/ethernet/neterion/vxge/vxge-main.c:3520 vxge_device_unregister() error: Using vdev after free_{netdev,candev}(dev); Since vdev pointer is netdev private data accessing it after free_netdev() call can cause use-after-free bug. Fix it by moving free_netdev() call at the end of the function Fixes: 6cca200362b4 ("vxge: cleanup probe error paths") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12net: fec: fix use-after-free in fec_drv_removePavel Skripkin1-1/+1
[ Upstream commit 44712965bf12ae1758cec4de53816ed4b914ca1a ] Smatch says: drivers/net/ethernet/freescale/fec_main.c:3994 fec_drv_remove() error: Using fep after free_{netdev,candev}(ndev); drivers/net/ethernet/freescale/fec_main.c:3995 fec_drv_remove() error: Using fep after free_{netdev,candev}(ndev); Since fep pointer is netdev private data, accessing it after free_netdev() call can cause use-after-free bug. Fix it by moving free_netdev() call at the end of the function Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: a31eda65ba21 ("net: fec: fix clock count mis-match") Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Reviewed-by: Joakim Zhang <qiangqing.zhang@nxp.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12net: pegasus: fix uninit-value in get_interrupt_intervalPavel Skripkin1-3/+11
[ Upstream commit af35fc37354cda3c9c8cc4961b1d24bdc9d27903 ] Syzbot reported uninit value pegasus_probe(). The problem was in missing error handling. get_interrupt_interval() internally calls read_eprom_word() which can fail in some cases. For example: failed to receive usb control message. These cases should be handled to prevent uninit value bug, since read_eprom_word() will not initialize passed stack variable in case of internal failure. Fail log: BUG: KMSAN: uninit-value in get_interrupt_interval drivers/net/usb/pegasus.c:746 [inline] BUG: KMSAN: uninit-value in pegasus_probe+0x10e7/0x4080 drivers/net/usb/pegasus.c:1152 CPU: 1 PID: 825 Comm: kworker/1:1 Not tainted 5.12.0-rc6-syzkaller #0 ... Workqueue: usb_hub_wq hub_event Call Trace: __dump_stack lib/dump_stack.c:79 [inline] dump_stack+0x24c/0x2e0 lib/dump_stack.c:120 kmsan_report+0xfb/0x1e0 mm/kmsan/kmsan_report.c:118 __msan_warning+0x5c/0xa0 mm/kmsan/kmsan_instr.c:197 get_interrupt_interval drivers/net/usb/pegasus.c:746 [inline] pegasus_probe+0x10e7/0x4080 drivers/net/usb/pegasus.c:1152 .... Local variable ----data.i@pegasus_probe created at: get_interrupt_interval drivers/net/usb/pegasus.c:1151 [inline] pegasus_probe+0xe57/0x4080 drivers/net/usb/pegasus.c:1152 get_interrupt_interval drivers/net/usb/pegasus.c:1151 [inline] pegasus_probe+0xe57/0x4080 drivers/net/usb/pegasus.c:1152 Reported-and-tested-by: syzbot+02c9f70f3afae308464a@syzkaller.appspotmail.com Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Link: https://lore.kernel.org/r/20210804143005.439-1-paskripkin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12bnx2x: fix an error code in bnx2x_nic_load()Dan Carpenter1-1/+2
[ Upstream commit fb653827c758725b149b5c924a5eb50ab4812750 ] Set the error code if bnx2x_alloc_fw_stats_mem() fails. The current code returns success. Fixes: ad5afc89365e ("bnx2x: Separate VF and PF logic") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12mips: Fix non-POSIX regexpH. Nikolaus Schaller1-1/+1
[ Upstream commit 28bbbb9875a35975904e46f9b06fa689d051b290 ] When cross compiling a MIPS kernel on a BSD based HOSTCC leads to errors like SYNC include/config/auto.conf.cmd - due to: .config egrep: empty (sub)expression UPD include/config/kernel.release HOSTCC scripts/dtc/dtc.o - due to target missing It turns out that egrep uses this egrep pattern: (|MINOR_|PATCHLEVEL_) This is not valid syntax or gives undefined results according to POSIX 9.5.3 ERE Grammar https://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap09.html It seems to be silently accepted by the Linux egrep implementation while a BSD host complains. Such patterns can be replaced by a transformation like "(|p1|p2)" -> "(p1|p2)?" Fixes: 48c35b2d245f ("[MIPS] There is no __GNUC_MAJOR__") Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12MIPS: check return value of pgtable_pmd_page_ctorHuang Pei1-6/+11
[ Upstream commit 6aa32467299e9e12280a6aec9dbc21bf2db830b0 ] +. According to Documentation/vm/split_page_table_lock, handle failure of pgtable_pmd_page_ctor +. Use GFP_KERNEL_ACCOUNT instead of GFP_KERNEL|__GFP_ACCOUNT +. Adjust coding style Fixes: ed914d48b6a1 ("MIPS: add PMD table accounting into MIPS') Reported-by: Joshua Kinard <kumba@gentoo.org> Signed-off-by: Huang Pei <huangpei@loongson.cn> Reviewed-by: Joshua Kinard <kumba@gentoo.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12net: sched: fix lockdep_set_class() typo error for sch->seqlockYunsheng Lin1-1/+1
[ Upstream commit 06f5553e0f0c2182268179b93856187d9cb86dd5 ] According to comment in qdisc_alloc(), sch->seqlock's lockdep class key should be set to qdisc_tx_busylock, due to possible type error, sch->busylock's lockdep class key is set to qdisc_tx_busylock, which is duplicated because sch->busylock's lockdep class key is already set in qdisc_alloc(). So fix it by replacing sch->busylock with sch->seqlock. Fixes: 96009c7d500e ("sched: replace __QDISC_STATE_RUNNING bit with a spin lock") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12net: dsa: qca: ar9331: reorder MDIO write sequenceOleksij Rempel1-3/+11
[ Upstream commit d1a58c013a5837451e3213e7a426d350fa524ead ] In case of this switch we work with 32bit registers on top of 16bit bus. Some registers (for example access to forwarding database) have trigger bit on the first 16bit half of request and the result + configuration of request in the second half. Without this patch, we would trigger database operation and overwrite result in one run. To make it work properly, we should do the second part of transfer before the first one is done. So far, this rule seems to work for all registers on this switch. Fixes: ec6698c272de ("net: dsa: add support for Atheros AR9331 built-in switch") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20210803063746.3600-1-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12net: ipv6: fix returned variable type in ip6_skb_dst_mtuAntoine Tenart1-1/+1
[ Upstream commit 4039146777a91e1576da2bf38e0d8a1061a1ae47 ] The patch fixing the returned value of ip6_skb_dst_mtu (int -> unsigned int) was rebased between its initial review and the version applied. In the meantime fade56410c22 was applied, which added a new variable (int) used as the returned value. This lead to a mismatch between the function prototype and the variable used as the return value. Fixes: 40fc3054b458 ("net: ipv6: fix return value of ip6_skb_dst_mtu") Cc: Vadim Fedorenko <vfedorenko@novek.ru> Signed-off-by: Antoine Tenart <atenart@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12nfp: update ethtool reporting of pauseframe controlFei Qin1-0/+2
[ Upstream commit 9fdc5d85a8fe684cdf24dc31c6bc4a727decfe87 ] Pauseframe control is set to symmetric mode by default on the NFP. Pause frames can not be configured through ethtool now, but ethtool can report the supported mode. Fixes: 265aeb511bd5 ("nfp: add support for .get_link_ksettings()") Signed-off-by: Fei Qin <fei.qin@corigine.com> Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12sctp: move the active_key update after sh_keys is addedXin Long1-5/+9
[ Upstream commit ae954bbc451d267f7d60d7b49db811d5a68ebd7b ] In commit 58acd1009226 ("sctp: update active_key for asoc when old key is being replaced"), sctp_auth_asoc_init_active_key() is called to update the active_key right after the old key is deleted and before the new key is added, and it caused that the active_key could be found with the key_id. In Ying Xu's testing, the BUG_ON in sctp_auth_asoc_init_active_key() was triggered: [ ] kernel BUG at net/sctp/auth.c:416! [ ] RIP: 0010:sctp_auth_asoc_init_active_key.part.8+0xe7/0xf0 [sctp] [ ] Call Trace: [ ] sctp_auth_set_key+0x16d/0x1b0 [sctp] [ ] sctp_setsockopt.part.33+0x1ba9/0x2bd0 [sctp] [ ] __sys_setsockopt+0xd6/0x1d0 [ ] __x64_sys_setsockopt+0x20/0x30 [ ] do_syscall_64+0x5b/0x1a0 So fix it by moving the active_key update after sh_keys is added. Fixes: 58acd1009226 ("sctp: update active_key for asoc when old key is being replaced") Reported-by: Ying Xu <yinxu@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12RDMA/mlx5: Delay emptying a cache entry when a new MR is added to it recentlyAharon Landau1-2/+2
[ Upstream commit d6793ca97b76642b77629dd0783ec64782a50bdb ] Fixing a typo that causes a cache entry to shrink immediately after adding to it new MRs if the entry size exceeds the high limit. In doing so, the cache misses its purpose to prevent the creation of new mkeys on the runtime by using the cached ones. Fixes: b9358bdbc713 ("RDMA/mlx5: Fix locking in MR cache work queue") Link: https://lore.kernel.org/r/fcb546986be346684a016f5ca23a0567399145fa.1627370131.git.leonro@nvidia.com Signed-off-by: Aharon Landau <aharonl@nvidia.com> Reviewed-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12gpio: tqmx86: really make IRQ optionalMatthias Schiffer1-3/+3
[ Upstream commit 9b87f43537acfa24b95c236beba0f45901356eb2 ] The tqmx86 MFD driver was passing IRQ 0 for "no IRQ" in the past. This causes warnings with newer kernels. Prepare the gpio-tqmx86 driver for the fixed MFD driver by handling a missing IRQ properly. Fixes: b868db94a6a7 ("gpio: tqmx86: Add GPIO from for this IO controller") Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12net: natsemi: Fix missing pci_disable_device() in probe and removeWang Hai1-6/+2
[ Upstream commit 7fe74dfd41c428afb24e2e615470832fa997ff14 ] Replace pci_enable_device() with pcim_enable_device(), pci_disable_device() and pci_release_regions() will be called in release automatically. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12net: phy: micrel: Fix detection of ksz87xx switchSteve Bennett1-5/+5
[ Upstream commit a5e63c7d38d548b8dab6c6205e0b6af76899dbf5 ] The logic for discerning between KSZ8051 and KSZ87XX PHYs is incorrect such that the that KSZ87XX switch is not identified correctly. ksz8051_ksz8795_match_phy_device() uses the parameter ksz_phy_id to discriminate whether it was called from ksz8051_match_phy_device() or from ksz8795_match_phy_device() but since PHY_ID_KSZ87XX is the same value as PHY_ID_KSZ8051, this doesn't work. Instead use a bool to discriminate the caller. Without this patch, the KSZ8795 switch port identifies as: ksz8795-switch spi3.1 ade1 (uninitialized): PHY [dsa-0.1:03] driver [Generic PHY] With the patch, it identifies correctly: ksz8795-switch spi3.1 ade1 (uninitialized): PHY [dsa-0.1:03] driver [Micrel KSZ87XX Switch] Fixes: 8b95599c55ed24b36cf4 ("net: phy: micrel: Discern KSZ8051 and KSZ8795 PHYs") Signed-off-by: Steve Bennett <steveb@workware.net.au> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12net: dsa: sja1105: match FDB entries regardless of inner/outer VLAN tagVladimir Oltean1-4/+0
[ Upstream commit 47c2c0c2312118a478f738503781de1d1a6020d2 ] On SJA1105P/Q/R/S and SJA1110, the L2 Lookup Table entries contain a maskable "inner/outer tag" bit which means: - when set to 1: match single-outer and double tagged frames - when set to 0: match untagged and single-inner tagged frames - when masked off: match all frames regardless of the type of tag This driver does not make any meaningful distinction between inner tags (matches on TPID) and outer tags (matches on TPID2). In fact, all VLAN table entries are installed as SJA1110_VLAN_D_TAG, which means that they match on both inner and outer tags. So it does not make sense that we install FDB entries with the IOTAG bit set to 1. In VLAN-unaware mode, we set both TPID and TPID2 to 0xdadb, so the switch will see frames as outer-tagged or double-tagged (never inner). So the FDB entries will match if IOTAG is set to 1. In VLAN-aware mode, we set TPID to 0x8100 and TPID2 to 0x88a8. So the switch will see untagged and 802.1Q-tagged packets as inner-tagged, and 802.1ad-tagged packets as outer-tagged. So untagged and 802.1Q-tagged packets will not match FDB entries if IOTAG is set to 1, but 802.1ad tagged packets will. Strange. To fix this, simply mask off the IOTAG bit from FDB entries, and make them match regardless of whether the VLAN tag is inner or outer. Fixes: 1da73821343c ("net: dsa: sja1105: Add FDB operations for P/Q/R/S series") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12net: dsa: sja1105: be stateless with FDB entries on SJA1105P/Q/R/S/SJA1110 tooVladimir Oltean1-14/+4
[ Upstream commit 589918df93226a1e5f104306c185b6dcf2bd8051 ] Similar but not quite the same with what was done in commit b11f0a4c0c81 ("net: dsa: sja1105: be stateless when installing FDB entries") for SJA1105E/T, it is desirable to drop the priv->vlan_aware check and simply go ahead and install FDB entries in the VLAN that was given by the bridge. As opposed to SJA1105E/T, in SJA1105P/Q/R/S and SJA1110, the FDB is a maskable TCAM, and we are installing VLAN-unaware FDB entries with the VLAN ID masked off. However, such FDB entries might completely obscure VLAN-aware entries where the VLAN ID is included in the search mask, because the switch looks up the FDB from left to right and picks the first entry which results in a masked match. So it depends on whether the bridge installs first the VLAN-unaware or the VLAN-aware FDB entries. Anyway, if we had a VLAN-unaware FDB entry towards one set of DESTPORTS and a VLAN-aware one towards other set of DESTPORTS, the result is that the packets in VLAN-aware mode will be forwarded towards the DESTPORTS specified by the VLAN-unaware entry. To solve this, simply do not use the masked matching ability of the FDB for VLAN ID, and always match precisely on it. In VLAN-unaware mode, we configure the switch for shared VLAN learning, so the VLAN ID will be ignored anyway during lookup, so it is redundant to mask it off in the TCAM. This patch conflicts with net-next commit 0fac6aa098ed ("net: dsa: sja1105: delete the best_effort_vlan_filtering mode") which changed this line: if (priv->vlan_state != SJA1105_VLAN_UNAWARE) { into: if (priv->vlan_aware) { When merging with net-next, the lines added by this patch should take precedence in the conflict resolution (i.e. the "if" condition should be deleted in both cases). Fixes: 1da73821343c ("net: dsa: sja1105: Add FDB operations for P/Q/R/S series") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12net: dsa: sja1105: invalidate dynamic FDB entries learned concurrently with ↵Vladimir Oltean1-2/+55
statically added ones [ Upstream commit 6c5fc159e0927531707895709eee1f8bfa04289f ] The procedure to add a static FDB entry in sja1105 is concurrent with dynamic learning performed on all bridge ports and the CPU port. The switch looks up the FDB from left to right, and also learns dynamically from left to right, so it is possible that between the moment when we pick up a free slot to install an FDB entry, another slot to the left of that one becomes free due to an address ageing out, and that other slot is then immediately used by the switch to learn dynamically the same address as we're trying to add statically. The result is that we succeeded to add our static FDB entry, but it is being shadowed by a dynamic FDB entry to its left, and the switch will behave as if our static FDB entry did not exist. We cannot really prevent this from happening unless we make the entire process to add a static FDB entry a huge critical section where address learning is temporarily disabled on _all_ ports, and then re-enabled according to the configuration done by sja1105_port_set_learning. However, that is kind of disruptive for the operation of the network. What we can do alternatively is to simply read back the FDB for dynamic entries located before our newly added static one, and delete them. This will guarantee that our static FDB entry is now operational. It will still not guarantee that there aren't dynamic FDB entries to the _right_ of that static FDB entry, but at least those entries will age out by themselves since they aren't hit, and won't bother anyone. Fixes: 291d1e72b756 ("net: dsa: sja1105: Add support for FDB and MDB management") Fixes: 1da73821343c ("net: dsa: sja1105: Add FDB operations for P/Q/R/S series") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12net: dsa: sja1105: overwrite dynamic FDB entries with static ones in ↵Vladimir Oltean1-4/+6
.port_fdb_add [ Upstream commit e11e865bf84e3c6ea91563ff3e858cfe0e184bd2 ] The SJA1105 switch family leaves it up to software to decide where within the FDB to install a static entry, and to concatenate destination ports for already existing entries (the FDB is also used for multicast entries), it is not as simple as just saying "please add this entry". This means we first need to search for an existing FDB entry before adding a new one. The driver currently manages to fool itself into thinking that if an FDB entry already exists, there is nothing to be done. But that FDB entry might be dynamically learned, case in which it should be replaced with a static entry, but instead it is left alone. This patch checks the LOCKEDS ("locked/static") bit from found FDB entries, and lets the code "goto skip_finding_an_index;" if the FDB entry was not static. So we also need to move the place where we set LOCKEDS = true, to cover the new case where a dynamic FDB entry existed but was dynamic. Fixes: 291d1e72b756 ("net: dsa: sja1105: Add support for FDB and MDB management") Fixes: 1da73821343c ("net: dsa: sja1105: Add FDB operations for P/Q/R/S series") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12net, gro: Set inner transport header offset in tcp/udp GRO hookJakub Sitnicki2-0/+7
[ Upstream commit d51c5907e9809a803b276883d203f45849abd4d6 ] GSO expects inner transport header offset to be valid when skb->encapsulation flag is set. GSO uses this value to calculate the length of an individual segment of a GSO packet in skb_gso_transport_seglen(). However, tcp/udp gro_complete callbacks don't update the skb->inner_transport_header when processing an encapsulated TCP/UDP segment. As a result a GRO skb has ->inner_transport_header set to a value carried over from earlier skb processing. This can have mild to tragic consequences. From miscalculating the GSO segment length to triggering a page fault [1], when trying to read TCP/UDP header at an address past the skb->data page. The latter scenario leads to an oops report like so: BUG: unable to handle page fault for address: ffff9fa7ec00d008 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 123f201067 P4D 123f201067 PUD 123f209067 PMD 0 Oops: 0000 [#1] SMP NOPTI CPU: 44 PID: 0 Comm: swapper/44 Not tainted 5.4.53-cloudflare-2020.7.21 #1 Hardware name: HYVE EDGE-METAL-GEN10/HS-1811DLite1, BIOS V2.15 02/21/2020 RIP: 0010:skb_gso_transport_seglen+0x44/0xa0 Code: c0 41 83 e0 11 f6 87 81 00 00 00 20 74 30 0f b7 87 aa 00 00 00 0f [...] RSP: 0018:ffffad8640bacbb8 EFLAGS: 00010202 RAX: 000000000000feda RBX: ffff9fcc8d31bc00 RCX: ffff9fa7ec00cffc RDX: ffff9fa7ebffdec0 RSI: 000000000000feda RDI: 0000000000000122 RBP: 00000000000005c4 R08: 0000000000000001 R09: 0000000000000000 R10: ffff9fe588ae3800 R11: ffff9fe011fc92f0 R12: ffff9fcc8d31bc00 R13: ffff9fe0119d4300 R14: 00000000000005c4 R15: ffff9fba57d70900 FS: 0000000000000000(0000) GS:ffff9fe68df00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff9fa7ec00d008 CR3: 0000003e99b1c000 CR4: 0000000000340ee0 Call Trace: <IRQ> skb_gso_validate_network_len+0x11/0x70 __ip_finish_output+0x109/0x1c0 ip_sublist_rcv_finish+0x57/0x70 ip_sublist_rcv+0x2aa/0x2d0 ? ip_rcv_finish_core.constprop.0+0x390/0x390 ip_list_rcv+0x12b/0x14f __netif_receive_skb_list_core+0x2a9/0x2d0 netif_receive_skb_list_internal+0x1b5/0x2e0 napi_complete_done+0x93/0x140 veth_poll+0xc0/0x19f [veth] ? mlx5e_napi_poll+0x221/0x610 [mlx5_core] net_rx_action+0x1f8/0x790 __do_softirq+0xe1/0x2bf irq_exit+0x8e/0xc0 do_IRQ+0x58/0xe0 common_interrupt+0xf/0xf </IRQ> The bug can be observed in a simple setup where we send IP/GRE/IP/TCP packets into a netns over a veth pair. Inside the netns, packets are forwarded to dummy device: trafgen -> [veth A]--[veth B] -forward-> [dummy] For veth B to GRO aggregate packets on receive, it needs to have an XDP program attached (for example, a trivial XDP_PASS). Additionally, for UDP, we need to enable GSO_UDP_L4 feature on the device: ip netns exec A ethtool -K AB rx-udp-gro-forwarding on The last component is an artificial delay to increase the chances of GRO batching happening: ip netns exec A tc qdisc add dev AB root \ netem delay 200us slot 5ms 10ms packets 2 bytes 64k With such a setup in place, the bug can be observed by tracing the skb outer and inner offsets when GSO skb is transmitted from the dummy device: tcp: FUNC DEV SKB_LEN NH TH ENC INH ITH GSO_SIZE GSO_TYPE ip_finish_output dumB 2830 270 290 1 294 254 1383 (tcpv4,gre,) ^^^ udp: FUNC DEV SKB_LEN NH TH ENC INH ITH GSO_SIZE GSO_TYPE ip_finish_output dumB 2818 270 290 1 294 254 1383 (gre,udp_l4,) ^^^ Fix it by updating the inner transport header offset in tcp/udp gro_complete callbacks, similar to how {inet,ipv6}_gro_complete callbacks update the inner network header offset, when skb->encapsulation flag is set. [1] https://lore.kernel.org/netdev/CAKxSbF01cLpZem2GFaUaifh0S-5WYViZemTicAg7FCHOnh6kug@mail.gmail.com/ Fixes: bf296b125b21 ("tcp: Add GRO support") Fixes: f993bc25e519 ("net: core: handle encapsulation offloads when computing segment lengths") Fixes: e20cf8d3f1f7 ("udp: implement GRO for plain UDP sockets.") Reported-by: Alex Forster <aforster@cloudflare.com> Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12dmaengine: imx-dma: configure the generic DMA type to make it workJuergen Borleis1-0/+2
[ Upstream commit 7199ddede9f0f2f68d41e6928e1c6c4bca9c39c0 ] Commit dea7a9fbb009 ("dmaengine: imx-dma: remove dma_slave_config direction usage") changes the method from a "configuration when called" to an "configuration when used". Due to this, only the cyclic DMA type gets configured correctly, while the generic DMA type is left non-configured. Without this additional call, the struct imxdma_channel::word_size member is stuck at DMA_SLAVE_BUSWIDTH_UNDEFINED and imxdma_prep_slave_sg() always returns NULL. Signed-off-by: Juergen Borleis <jbe@pengutronix.de> Fixes: dea7a9fbb009 ("dmaengine: imx-dma: remove dma_slave_config direction usage") Link: https://lore.kernel.org/r/20210729071821.9857-1-jbe@pengutronix.de Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12ARM: dts: stm32: Fix touchscreen IRQ line assignment on DHCOMMarek Vasut1-10/+14
[ Upstream commit 15f68f027ebd961b99a1c420f96ff3838c5e4450 ] While 7e5f3155dcbb4 ("ARM: dts: stm32: Fix LED5 on STM32MP1 DHCOM PDK2") fixed the LED0 assignment on the PDK2 board, the same commit did not update the touchscreen IRQ line assignment, which is the same GPIO line, shared between the LED0 output and touchscreen IRQ input. To make this more convoluted, the same EXTI input (not the same GPIO line) is shared between Button B which is Active-Low IRQ, and touchscreen IRQ which is Edge-Falling IRQ, which cannot be used at the same time. In case the LCD board with touchscreen is in use, which is the case here, LED0 must be disabled, Button B must be polled, so the touchscreen interrupt works as it should. Update the touchscreen IRQ line assignment, disable LED0 and use polled GPIO button driver for Button B, since the DT here describes baseboard with LCD board. Fixes: 7e5f3155dcbb4 ("ARM: dts: stm32: Fix LED5 on STM32MP1 DHCOM PDK2") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12ARM: dts: stm32: Disable LAN8710 EDPD on DHCOMMarek Vasut1-0/+1
[ Upstream commit 36862c1ebc92a7e6fcc55002965c44b8ad17d4ca ] The LAN8710 Energy Detect Power Down (EDPD) functionality might cause unreliable cable detection. There are multiple accounts of this in the SMSC PHY driver patches which attempted to make EDPD reliable, however it seems there is always some sort of corner case left. Unfortunatelly, there is no errata documented which would confirm this to be a silicon bug on the LAN87xx series of PHYs (LAN8700, LAN8710, LAN8720 at least). Disable EDPD on the DHCOM SoM, just like multiple other boards already do as well, to make the cable detection reliable. Fixes: 34e0c7847dcf ("ARM: dts: stm32: Add DH Electronics DHCOM STM32MP1 SoM and PDK2 board") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12media: videobuf2-core: dequeue if start_streaming failsHans Verkuil1-1/+12
[ Upstream commit c592b46907adbeb81243f7eb7a468c36692658b8 ] If a vb2_queue sets q->min_buffers_needed then when the number of queued buffers reaches q->min_buffers_needed, vb2_core_qbuf() will call the start_streaming() callback. If start_streaming() returns an error, then that error was just returned by vb2_core_qbuf(), but the buffer was still queued. However, userspace expects that if VIDIOC_QBUF fails, the buffer is returned dequeued. So if start_streaming() fails, then remove the buffer from the queue, thus avoiding this unwanted side-effect. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Fixes: b3379c6201bb ("[media] vb2: only call start_streaming if sufficient buffers are queued") Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12scsi: sr: Return correct event when media event code is 3Li Manyi1-1/+1
[ Upstream commit 5c04243a56a7977185b00400e59ca7e108004faf ] Media event code 3 is defined in the MMC-6 spec as follows: "MediaRemoval: The media has been removed from the specified slot, and the Drive is unable to access the media without user intervention. This applies to media changers only." This indicated that treating the condition as an EJECT_REQUEST was appropriate. However, doing so had the unfortunate side-effect of causing the drive tray to be physically ejected on resume. Instead treat the event as a MEDIA_CHANGE request. Fixes: 7dd753ca59d6 ("scsi: sr: Return appropriate error code when disk is ejected") Link: https://bugzilla.kernel.org/show_bug.cgi?id=213759 Link: https://lore.kernel.org/r/20210726114913.6760-1-limanyi@uniontech.com Signed-off-by: Li Manyi <limanyi@uniontech.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12spi: imx: mx51-ecspi: Fix low-speed CONFIGREG delay calculationMarek Vasut1-1/+15
[ Upstream commit 53ca18acbe645656132fb5a329833db711067e54 ] The spi_imx->spi_bus_clk may be uninitialized and thus also zero in mx51_ecspi_prepare_message(), which would lead to division by zero in kernel. Since bitbang .setup_transfer callback which initializes the spi_imx->spi_bus_clk is called after bitbang prepare_message callback, iterate over all the transfers in spi_message, find the one with lowest bus frequency, and use that bus frequency for the delay calculation. Note that it is not possible to move this CONFIGREG delay back into the .setup_transfer callback, because that is invoked too late, after the GPIO chipselects were already configured. Fixes: 135cbd378eab ("spi: imx: mx51-ecspi: Reinstate low-speed CONFIGREG delay") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20210726100102.5188-1-marex@denx.de Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12spi: imx: mx51-ecspi: Reinstate low-speed CONFIGREG delayMarek Vasut1-19/+19
[ Upstream commit 135cbd378eab336da15de9c84bbb22bf743b38a5 ] Since 00b80ac935539 ("spi: imx: mx51-ecspi: Move some initialisation to prepare_message hook."), the MX51_ECSPI_CONFIG write no longer happens in prepare_transfer hook, but rather in prepare_message hook, however the MX51_ECSPI_CONFIG delay is still left in prepare_transfer hook and thus has no effect. This leads to low bus frequency operation problems described in 6fd8b8503a0dc ("spi: spi-imx: Fix out-of-order CS/SCLK operation at low speeds") again. Move the MX51_ECSPI_CONFIG write delay into the prepare_message hook as well, thus reinstating the low bus frequency fix. Fixes: 00b80ac935539 ("spi: imx: mx51-ecspi: Move some initialisation to prepare_message hook.") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20210703022300.296114-1-marex@denx.de Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12dmaengine: stm32-dmamux: Fix PM usage counter unbalance in stm32 dmamux opsZhang Qilong1-3/+3
[ Upstream commit baa16371c9525f24d508508e4d296c031e1de29c ] pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to putting operation will result in reference leak here. We fix it by replacing it with pm_runtime_resume_and_get to keep usage counter balanced. Fixes: 4f3ceca254e0f ("dmaengine: stm32-dmamux: Add PM Runtime support") Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> Link: https://lore.kernel.org/r/20210607064640.121394-3-zhangqilong3@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12dmaengine: stm32-dma: Fix PM usage counter imbalance in stm32 dma opsZhang Qilong1-2/+2
[ Upstream commit d54db74ad6e0dea8c253fb68c689b836657ab914 ] pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to putting operation will result in reference leak here. We fix it by replacing it with pm_runtime_resume_and_get to keep usage counter balanced. Fixes: 48bc73ba14bcd ("dmaengine: stm32-dma: Add PM Runtime support") Fixes: 05f8740a0e6fc ("dmaengine: stm32-dma: add suspend/resume power management support") Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> Link: https://lore.kernel.org/r/20210607064640.121394-2-zhangqilong3@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12clk: tegra: Implement disable_unused() of tegra_clk_sdmmc_mux_opsDmitry Osipenko1-0/+10
[ Upstream commit 2bcc025ab9bbd029b1730cde71cb4e4f0ed35d0f ] Implement disable_unused() callback of tegra_clk_sdmmc_mux_ops to fix imbalanced disabling of the unused MMC clock on Tegra210 Jetson Nano. Fixes: c592c8a28f58 ("clk: tegra: Fix refcounting of gate clocks") Reported-by: Jon Hunter <jonathanh@nvidia.com> # T210 Nano Tested-by: Jon Hunter <jonathanh@nvidia.com> # T210 Nano Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20210717112742.7196-1-digetx@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12dmaengine: uniphier-xdmac: Use readl_poll_timeout_atomic() in atomic stateKunihiko Hayashi1-2/+2
[ Upstream commit 55f24c27b6c1a840b62fe297616f1f9ea3576cb7 ] The function uniphier_xdmac_chan_stop() is only called in atomic state. Should use readl_poll_timeout_atomic() there instead of readl_poll_timeout(). Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: 667b9251440b ("dmaengine: uniphier-xdmac: Add UniPhier external DMA controller driver") Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Link: https://lore.kernel.org/r/1627364852-28432-1-git-send-email-hayashi.kunihiko@socionext.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12omap5-board-common: remove not physically existing vdds_1v8_main fixed-regulatorH. Nikolaus Schaller1-8/+1
[ Upstream commit c68ef4ad180e09805fa46965d15e1dfadf09ffa5 ] This device tree include file describes a fixed-regulator connecting smps7_reg output (1.8V) to some 1.8V rail and consumers (vdds_1v8_main). This regulator does not physically exist. I assume it was introduced as a wrapper around smps7_reg to provide a speaking signal name "vdds_1v8_main" as label. This fixed-regulator without real function was not an issue in driver code until Commit 98e48cd9283d ("regulator: core: resolve supply for boot-on/always-on regulators") introduced a new check for regulator initialization which makes Palmas regulator registration fail: [ 5.407712] ldo1: supplied by vsys_cobra [ 5.412748] ldo2: supplied by vsys_cobra [ 5.417603] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator The reason is that the supply-chain of regulators is too long and goes from ldo3 through the virtual vdds_1v8_main regulator and then back to smps7. This adds a cross-dependency of probing Palmas regulators and the fixed-regulator which leads to probe deferral by the new check and is no longer resolved. Since we do not control what device tree files including this one reference (either &vdds_1v8_main or &smps7_reg or both) we keep both labels for smps7 for compatibility. Fixes: 98e48cd9283d ("regulator: core: resolve supply for boot-on/always-on regulators") Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12ARM: dts: am437x-l4: fix typo in can@0 nodeDario Binacchi1-1/+1
[ Upstream commit 0162a9964365fd26e34575e121b17d021204c481 ] Replace clock-name with clock-names. Fixes: 2a4117df9b43 ("ARM: dts: Fix dcan driver probe failed on am437x platform") Signed-off-by: Dario Binacchi <dariobin@libero.it> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12clk: stm32f4: fix post divisor setup for I2S/SAI PLLsDario Binacchi1-5/+5
[ Upstream commit 24b5b1978cd5a80db58e2a19db2f9c36fe8d4f7a ] Enabling the framebuffer leads to a system hang. Running, as a debug hack, the store_pan() function in drivers/video/fbdev/core/fbsysfs.c without taking the console_lock, allows to see the crash backtrace on the serial line. ~ # echo 0 0 > /sys/class/graphics/fb0/pan [ 9.719414] Unhandled exception: IPSR = 00000005 LR = fffffff1 [ 9.726937] CPU: 0 PID: 49 Comm: sh Not tainted 5.13.0-rc5 #9 [ 9.733008] Hardware name: STM32 (Device Tree Support) [ 9.738296] PC is at clk_gate_is_enabled+0x0/0x28 [ 9.743426] LR is at stm32f4_pll_div_set_rate+0xf/0x38 [ 9.748857] pc : [<0011e4be>] lr : [<0011f9e3>] psr: 0100000b [ 9.755373] sp : 00bc7be0 ip : 00000000 fp : 001f3ac4 [ 9.760812] r10: 002610d0 r9 : 01efe920 r8 : 00540560 [ 9.766269] r7 : 02e7ddb0 r6 : 0173eed8 r5 : 00000000 r4 : 004027c0 [ 9.773081] r3 : 0011e4bf r2 : 02e7ddb0 r1 : 0173eed8 r0 : 1d3267b8 [ 9.779911] xPSR: 0100000b [ 9.782719] CPU: 0 PID: 49 Comm: sh Not tainted 5.13.0-rc5 #9 [ 9.788791] Hardware name: STM32 (Device Tree Support) [ 9.794120] [<0000afa1>] (unwind_backtrace) from [<0000a33f>] (show_stack+0xb/0xc) [ 9.802421] [<0000a33f>] (show_stack) from [<0000a8df>] (__invalid_entry+0x4b/0x4c) The `pll_num' field in the post_div_data configuration contained a wrong value which also referenced an uninitialized hardware clock when clk_register_pll_div() was called. Fixes: 517633ef630e ("clk: stm32f4: Add post divisor for I2S & SAI PLLs") Signed-off-by: Dario Binacchi <dariobin@libero.it> Reviewed-by: Gabriel Fernandez <gabriel.fernandez@st.com> Link: https://lore.kernel.org/r/20210725160725.10788-1-dariobin@libero.it Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-12ALSA: usb-audio: fix incorrect clock source settingchihhao.chen1-0/+6
[ Upstream commit 4511781f95da0a3b2bad34f3f5e3967e80cd2d18 ] The following scenario describes an echo test for Samsung USBC Headset (AKG) with VID/PID (0x04e8/0xa051). We first start a capture stream(USB IN transfer) in 96Khz/24bit/1ch mode. In clock find source function, we get value 0x2 for clock selector and 0x1 for clock source. Kernel-4.14 behavior Since clock source is valid so clock selector was not set again. We pass through this function and start a playback stream(USB OUT transfer) in 48Khz/32bit/2ch mode. This time we get value 0x1 for clock selector and 0x1 for clock source. Finally clock id with this setting is 0x9. Kernel-5.10 behavior Clock selector was always set one more time even it is valid. When we start a playback stream, we will get 0x2 for clock selector and 0x1 for clock source. In this case clock id becomes 0xA. This is an incorrect clock source setting and results in severe noises. We see wrong data rate in USB IN transfer. (From 288 bytes/ms becomes 144 bytes/ms) It should keep in 288 bytes/ms. This earphone works fine on older kernel version load because this is a newly-a