summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-09-22tracing/boot: Fix a hist trigger dependency for boot time tracingMasami Hiramatsu1-6/+9
[ Upstream commit 6fe7c745f2acb73e4cc961d7f91125eef5a8861f ] Fixes a build error when CONFIG_HIST_TRIGGERS=n with boot-time tracing. Since the trigger_process_regex() is defined only when CONFIG_HIST_TRIGGERS=y, if it is disabled, the 'actions' event option also must be disabled. Link: https://lkml.kernel.org/r/162856123376.203126.582144262622247352.stgit@devnote2 Fixes: 81a59555ff15 ("tracing/boot: Add per-event settings") Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-22mfd: tqmx86: Clear GPIO IRQ resource when no IRQ is setMatthias Schiffer1-0/+2
[ Upstream commit a946506c48f3bd09363c9d2b0a178e55733bcbb6 ] The driver was registering IRQ 0 when no IRQ was set. This leads to warnings with newer kernels. Clear the resource flags, so no resource is registered at all in this case. Fixes: 2f17dd34ffed ("mfd: tqmx86: IO controller with I2C, Wachdog and GPIO") Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-22PCI: Fix pci_dev_str_match_path() alloc while atomic bugDan Carpenter1-1/+1
[ Upstream commit 7eb6ea4148579b85540a41d57bcec315b8af8ff8 ] pci_dev_str_match_path() is often called with a spinlock held so the allocation has to be atomic. The call tree is: pci_specified_resource_alignment() <-- takes spin_lock(); pci_dev_str_match() pci_dev_str_match_path() Fixes: 45db33709ccc ("PCI: Allow specifying devices using a base bus and path of devfns") Link: https://lore.kernel.org/r/20210812070004.GC31863@kili Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-22KVM: arm64: Restrict IPA size to maximum 48 bits on 4K and 16K page sizeAnshuman Khandual1-0/+8
[ Upstream commit 5e5df9571c319fb107d7a523cc96fcc99961ee70 ] Even though ID_AA64MMFR0.PARANGE reports 52 bit PA size support, it cannot be enabled as guest IPA size on 4K or 16K page size configurations. Hence kvm_ipa_limit must be restricted to 48 bits. This change achieves required IPA capping. Before the commit c9b69a0cf0b4 ("KVM: arm64: Don't constrain maximum IPA size based on host configuration"), the problem here would have been just latent via PHYS_MASK_SHIFT (which earlier in turn capped kvm_ipa_limit), which remains capped at 48 bits on 4K and 16K configs. Cc: Marc Zyngier <maz@kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Alexandru Elisei <alexandru.elisei@arm.com> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Cc: kvmarm@lists.cs.columbia.edu Cc: linux-kernel@vger.kernel.org Fixes: c9b69a0cf0b4 ("KVM: arm64: Don't constrain maximum IPA size based on host configuration") Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/1628680275-16578-1-git-send-email-anshuman.khandual@arm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-22netfilter: nft_ct: protect nft_ct_pcpu_template_refcnt with mutexPavel Skripkin1-1/+8
[ Upstream commit e3245a7b7b34bd2e97f744fd79463add6e9d41f4 ] Syzbot hit use-after-free in nf_tables_dump_sets. The problem was in missing lock protection for nft_ct_pcpu_template_refcnt. Before commit f102d66b335a ("netfilter: nf_tables: use dedicated mutex to guard transactions") all transactions were serialized by global mutex, but then global mutex was changed to local per netnamespace commit_mutex. This change causes use-after-free bug, when 2 netnamespaces concurently changing nft_ct_pcpu_template_refcnt without proper locking. Fix it by adding nft_ct_pcpu_mutex and protect all nft_ct_pcpu_template_refcnt changes with it. Fixes: f102d66b335a ("netfilter: nf_tables: use dedicated mutex to guard transactions") Reported-and-tested-by: syzbot+649e339fa6658ee623d3@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-22netfilter: Fix fall-through warnings for ClangGustavo A. R. Silva3-0/+3
[ Upstream commit c2168e6bd7ec50cedb69b3be1ba6146e28893c69 ] In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple warnings by explicitly adding multiple break statements instead of just letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115 Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-22PCI: iproc: Fix BCMA probe resource handlingRob Herring1-10/+6
[ Upstream commit aeaea8969b402e0081210cc9144404d13996efed ] In commit 7ef1c871da16 ("PCI: iproc: Use pci_parse_request_of_pci_ranges()"), calling devm_request_pci_bus_resources() was dropped from the common iProc probe code, but is still needed for BCMA bus probing. Without it, there will be lots of warnings like this: pci 0000:00:00.0: BAR 8: no space for [mem size 0x00c00000] pci 0000:00:00.0: BAR 8: failed to assign [mem size 0x00c00000] Add back calling devm_request_pci_bus_resources() and adding the resources to pci_host_bridge.windows for BCMA bus probe. Link: https://lore.kernel.org/r/20210803215656.3803204-2-robh@kernel.org Fixes: 7ef1c871da16 ("PCI: iproc: Use pci_parse_request_of_pci_ranges()") Reported-by: Rafał Miłecki <zajec5@gmail.com> Tested-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Srinath Mannam <srinath.mannam@broadcom.com> Cc: Roman Bacik <roman.bacik@broadcom.com> Cc: Bharat Gooty <bharat.gooty@broadcom.com> Cc: Abhishek Shah <abhishek.shah@broadcom.com> Cc: Jitendra Bhivare <jitendra.bhivare@broadcom.com> Cc: Ray Jui <ray.jui@broadcom.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: BCM Kernel Feedback <bcm-kernel-feedback-list@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: "Krzysztof Wilczyński" <kw@linux.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-22PCI: of: Don't fail devm_pci_alloc_host_bridge() on missing 'ranges'Rob Herring1-1/+1
[ Upstream commit d277f6e88c88729b1d57d40bbfb00d0bfc961972 ] Commit 669cbc708122 ("PCI: Move DT resource setup into devm_pci_alloc_host_bridge()") made devm_pci_alloc_host_bridge() fail on any DT resource parsing errors, but Broadcom iProc uses devm_pci_alloc_host_bridge() on BCMA bus devices that don't have DT resources. In particular, there is no 'ranges' property. Fix iProc by making 'ranges' optional. If 'ranges' is required by a platform, there's going to be more errors latter on if it is missing. Link: https://lore.kernel.org/r/20210803215656.3803204-1-robh@kernel.org Fixes: 669cbc708122 ("PCI: Move DT resource setup into devm_pci_alloc_host_bridge()") Reported-by: Rafał Miłecki <zajec5@gmail.com> Tested-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Srinath Mannam <srinath.mannam@broadcom.com> Cc: Roman Bacik <roman.bacik@broadcom.com> Cc: Bharat Gooty <bharat.gooty@broadcom.com> Cc: Abhishek Shah <abhishek.shah@broadcom.com> Cc: Jitendra Bhivare <jitendra.bhivare@broadcom.com> Cc: Ray Jui <ray.jui@broadcom.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: BCM Kernel Feedback <bcm-kernel-feedback-list@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-22backlight: ktd253: Stabilize backlightLinus Walleij1-20/+55
[ Upstream commit daa37361518bf2d1f591bbdaa7c68b2a43d7af48 ] Remove interrupt disablement during backlight setting. It is way to dangerous and makes platforms instable by having it miss vblank IRQs leading to the graphics derailing. The code is using ndelay() which is not available on platforms such as ARM and will result in 32 * udelay(1) which is substantial. Add some code to detect if an interrupt occurs during the tight loop and in that case just redo it from the top. Fixes: 5317f37e48b9 ("backlight: Add Kinetic KTD253 backlight driver") Cc: Stephan Gerhold <stephan@gerhold.net> Reported-by: newbyte@disroot.org Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-22mfd: axp20x: Update AXP288 volatile rangesHans de Goede1-1/+2
[ Upstream commit f949a9ebce7a18005266b859a17f10c891bb13d7 ] On Cherry Trail devices with an AXP288 PMIC the external SD-card slot used the AXP's DLDO2 as card-voltage and either DLDO3 or GPIO1LDO (GPIO1 pin in low noise LDO mode) as signal-voltage. These regulators are turned on/off and in case of the signal-voltage also have their output-voltage changed by the _PS0 and _PS3 power- management ACPI methods on the MMC-controllers ACPI fwnode as well as by the _DSM ACPI method for changing the signal voltage. The AML code implementing these methods is directly accessing the PMIC through ACPI I2C OpRegion accesses, instead of using the special PMIC OpRegion handled by drivers/acpi/pmic/intel_pmic_xpower.c . This means that the contents of the involved PMIC registers can change without the change being made through the regmap interface, so regmap should not cache the contents of these registers. Mark the regulator power on/off, the regulator voltage control and the GPIO1 control registers as volatile, to avoid regmap caching them. Specifically this fixes an issue on some models where the i915 driver toggles another LDO using the same on/off register on/off through MIPI sequences (through intel_soc_pmic_exec_mipi_pmic_seq_element()) which then writes back a cached on/off register-value where the card-voltage is off causing the external sdcard slot to stop working when the screen goes blank, or comes back on again. The regulator register-range now marked volatile also includes the buck regulator control registers. This is done on purpose these are normally not touched by the AML code, but they are updated directly by the SoC's PUNIT which means that they may also change without going through regmap. Note the AXP288 PMIC is only used on Bay- and Cherry-Trail platforms, so even though this is an ACPI specific problem there is no need to make the new volatile ranges conditional since these platforms always use ACPI. Fixes: dc91c3b6fe66 ("mfd: axp20x: Mark AXP20X_VBUS_IPSOUT_MGMT as volatile") Fixes: cd53216625a0 ("mfd: axp20x: Fix axp288 volatile ranges") Reported-and-tested-by: Clamshell <clamfly@163.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-22s390/bpf: Fix branch shortening during codegen passIlya Leoshkevich1-2/+1
commit 1511df6f5e9ef32826f20db2ee81f8527154dc14 upstream. EMIT6_PCREL() macro assumes that the previous pass generated 6 bytes of code, which is not the case if branch shortening took place. Fix by using jit->prg, like all the other EMIT6_PCREL_*() macros. Reported-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Fixes: 4e9b4a6883dd ("s390/bpf: Use relative long branches") Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-22s390/bpf: Fix 64-bit subtraction of the -0x80000000 constantIlya Leoshkevich1-2/+7
commit 6e61dc9da0b7a0d91d57c2e20b5ea4fd2d4e7e53 upstream. The JIT uses agfi for subtracting constants, but -(-0x80000000) cannot be represented as a 32-bit signed binary integer. Fix by using algfi in this particular case. Reported-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Fixes: 054623105728 ("s390/bpf: Add s390x eBPF JIT compiler backend") Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-22s390/bpf: Fix optimizing out zero-extensionsIlya Leoshkevich1-28/+30
commit db7bee653859ef7179be933e7d1384644f795f26 upstream. Currently the JIT completely removes things like `reg32 += 0`, however, the BPF_ALU semantics requires the target register to be zero-extended in such cases. Fix by optimizing out only the arithmetic operation, but not the subsequent zero-extension. Reported-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Fixes: 054623105728 ("s390/bpf: Add s390x eBPF JIT compiler backend") Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-22NTB: perf: Fix an error code in perf_setup_inbuf()Yang Li1-0/+1
[ Upstream commit 0097ae5f7af5684f961a5f803ff7ad3e6f933668 ] When the function IS_ALIGNED() returns false, the value of ret is 0. So, we set ret to -EINVAL to indicate this error. Clean up smatch warning: drivers/ntb/test/ntb_perf.c:602 perf_setup_inbuf() warn: missing error code 'ret'. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-22NTB: Fix an error code in ntb_msit_probe()Yang Li1-1/+3
[ Upstream commit 319f83ac98d7afaabab84ce5281a819a358b9895 ] When the value of nm->isr_ctx is false, the value of ret is 0. So, we set ret to -ENOMEM to indicate this error. Clean up smatch warning: drivers/ntb/test/ntb_msi_test.c:373 ntb_msit_probe() warn: missing error code 'ret'. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-22ethtool: Fix an error code in cxgb2.cYang Li1-0/+1
[ Upstream commit 7db8263a12155c7ae4ad97e850f1e499c73765fc ] When adapter->registered_device_map is NULL, the value of err is uncertain, we set err to -EINVAL to avoid ambiguity. Clean up smatch warning: drivers/net/ethernet/chelsio/cxgb/cxgb2.c:1114 init_one() warn: missing error code 'err' Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-22PCI: ibmphp: Fix double unmap of io_memVishal Aslot2-7/+1
[ Upstream commit faa2e05ad0dccf37f995bcfbb8d1980d66c02c11 ] ebda_rsrc_controller() calls iounmap(io_mem) on the error path. Its caller, ibmphp_access_ebda(), also calls iounmap(io_mem) on good and error paths. Remove the iounmap(io_mem) invocation from ebda_rsrc_controller(). [bhelgaas: remove item from TODO] Link: https://lore.kernel.org/r/20210818165751.591185-1-os.vaslot@gmail.com Signed-off-by: Vishal Aslot <os.vaslot@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-22block, bfq: honor already-setup queue mergesPaolo Valente1-3/+13
[ Upstream commit 2d52c58b9c9bdae0ca3df6a1eab5745ab3f7d80b ] The function bfq_setup_merge prepares the merging between two bfq_queues, say bfqq and new_bfqq. To this goal, it assigns bfqq->new_bfqq = new_bfqq. Then, each time some I/O for bfqq arrives, the process that generated that I/O is disassociated from bfqq and associated with new_bfqq (merging is actually a redirection). In this respect, bfq_setup_merge increases new_bfqq->ref in advance, adding the number of processes that are expected to be associated with new_bfqq. Unfortunately, the stable-merging mechanism interferes with this setup. After bfqq->new_bfqq has been set by bfq_setup_merge, and before all the expected processes have been associated with bfqq->new_bfqq, bfqq may happen to be stably merged with a different queue than the current bfqq->new_bfqq. In this case, bfqq->new_bfqq gets changed. So, some of the processes that have been already accounted for in the ref counter of the previous new_bfqq will not be associated with that queue. This creates an unbalance, because those references will never be decremented. This commit fixes this issue by reestablishing the previous, natural behaviour: once bfqq->new_bfqq has been set, it will not be changed until all expected redirections have occurred. Signed-off-by: Davide Zini <davidezini2@gmail.com> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Link: https://lore.kernel.org/r/20210802141352.74353-2-paolo.valente@linaro.org Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-22net: usb: cdc_mbim: avoid altsetting toggling for Telit LN920Daniele Palmas1-0/+5
[ Upstream commit aabbdc67f3485b5db27ab4eba01e5fbf1ffea62c ] Add quirk CDC_MBIM_FLAG_AVOID_ALTSETTING_TOGGLE for Telit LN920 0x1061 composition in order to avoid bind error. Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-22Set fc_nlinfo in nh_create_ipv4, nh_create_ipv6Ryoga Saito1-0/+2
[ Upstream commit 9aca491e0dccf8a9d84a5b478e5eee3c6ea7803b ] This patch fixes kernel NULL pointer dereference when creating nexthop which is bound with SRv6 decapsulation. In the creation of nexthop, __seg6_end_dt_vrf_build is called. __seg6_end_dt_vrf_build expects fc_lninfo in fib6_config is set correctly, but it isn't set in nh_create_ipv6, which causes kernel crash. Here is steps to reproduce kernel crash: 1. modprobe vrf 2. ip -6 nexthop add encap seg6local action End.DT4 vrftable 1 dev eth0 We got the following message: [ 901.370336] BUG: kernel NULL pointer dereference, address: 0000000000000ba0 [ 901.371658] #PF: supervisor read access in kernel mode [ 901.372672] #PF: error_code(0x0000) - not-present page [ 901.373672] PGD 0 P4D 0 [ 901.374248] Oops: 0000 [#1] SMP PTI [ 901.374944] CPU: 0 PID: 8593 Comm: ip Not tainted 5.14-051400-generic #202108310811-Ubuntu [ 901.376404] Hardware name: Red Hat KVM, BIOS 1.11.1-4.module_el8.2.0+320+13f867d7 04/01/2014 [ 901.377907] RIP: 0010:vrf_ifindex_lookup_by_table_id+0x19/0x90 [vrf] [ 901.379182] Code: c1 e9 72 ff ff ff e8 96 49 01 c2 66 0f 1f 44 00 00 0f 1f 44 00 00 55 48 89 e5 41 56 41 55 41 89 f5 41 54 53 8b 05 47 4c 00 00 <48> 8b 97 a0 0b 00 00 48 8b 1c c2 e8 57 27 53 c1 4c 8d a3 88 00 00 [ 901.382652] RSP: 0018:ffffbf2d02043590 EFLAGS: 00010282 [ 901.383746] RAX: 000000000000000b RBX: ffff990808255e70 RCX: ffffbf2d02043aa8 [ 901.385436] RDX: 0000000000000001 RSI: 0000000000000001 RDI: 0000000000000000 [ 901.386924] RBP: ffffbf2d020435b0 R08: 00000000000000c0 R09: ffff990808255e40 [ 901.388537] R10: ffffffff83b08c90 R11: 0000000000000009 R12: 0000000000000000 [ 901.389937] R13: 0000000000000001 R14: 0000000000000000 R15: 000000000000000b [ 901.391226] FS: 00007fe49381f740(0000) GS:ffff99087dc00000(0000) knlGS:0000000000000000 [ 901.392737] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 901.393803] CR2: 0000000000000ba0 CR3: 000000000e3e8003 CR4: 0000000000770ef0 [ 901.395122] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 901.396496] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 901.397833] PKRU: 55555554 [ 901.398578] Call Trace: [ 901.399144] l3mdev_ifindex_lookup_by_table_id+0x3b/0x70 [ 901.400179] __seg6_end_dt_vrf_build+0x34/0xd0 [ 901.401067] seg6_end_dt4_build+0x16/0x20 [ 901.401904] seg6_local_build_state+0x271/0x430 [ 901.402797] lwtunnel_build_state+0x81/0x130 [ 901.403645] fib_nh_common_init+0x82/0x100 [ 901.404465] ? sock_def_readable+0x4b/0x80 [ 901.405285] fib6_nh_init+0x115/0x7c0 [ 901.406033] nh_create_ipv6.isra.0+0xe1/0x140 [ 901.406932] rtm_new_nexthop+0x3b7/0xeb0 [ 901.407828] rtnetlink_rcv_msg+0x152/0x3a0 [ 901.408663] ? rtnl_calcit.isra.0+0x130/0x130 [ 901.409535] netlink_rcv_skb+0x55/0x100 [ 901.410319] rtnetlink_rcv+0x15/0x20 [ 901.411026] netlink_unicast+0x1a8/0x250 [ 901.411813] netlink_sendmsg+0x238/0x470 [ 901.412602] ? _copy_from_user+0x2b/0x60 [ 901.413394] sock_sendmsg+0x65/0x70 [ 901.414112] ____sys_sendmsg+0x218/0x290 [ 901.414929] ? copy_msghdr_from_user+0x5c/0x90 [ 901.415814] ___sys_sendmsg+0x81/0xc0 [ 901.416559] ? fsnotify_destroy_marks+0x27/0xf0 [ 901.417447] ? call_rcu+0xa4/0x230 [ 901.418153] ? kmem_cache_free+0x23f/0x410 [ 901.418972] ? dentry_free+0x37/0x70 [ 901.419705] ? mntput_no_expire+0x4c/0x260 [ 901.420574] __sys_sendmsg+0x62/0xb0 [ 901.421297] __x64_sys_sendmsg+0x1f/0x30 [ 901.422057] do_syscall_64+0x5c/0xc0 [ 901.422756] ? syscall_exit_to_user_mode+0x27/0x50 [ 901.423675] ? __x64_sys_close+0x12/0x40 [ 901.424462] ? do_syscall_64+0x69/0xc0 [ 901.425219] ? irqentry_exit_to_user_mode+0x9/0x20 [ 901.426149] ? irqentry_exit+0x19/0x30 [ 901.426901] ? exc_page_fault+0x89/0x160 [ 901.427709] ? asm_exc_page_fault+0x8/0x30 [ 901.428536] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 901.429514] RIP: 0033:0x7fe493945747 [ 901.430248] Code: 64 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10 [ 901.433549] RSP: 002b:00007ffe9932cf68 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 901.434981] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fe493945747 [ 901.436303] RDX: 0000000000000000 RSI: 00007ffe9932cfe0 RDI: 0000000000000003 [ 901.437607] RBP: 00000000613053f7 R08: 0000000000000001 R09: 00007ffe9932d07c [ 901.438990] R10: 000055f4a903a010 R11: 0000000000000246 R12: 0000000000000001 [ 901.440340] R13: 0000000000000001 R14: 000055f4a802b163 R15: 000055f4a8042020 [ 901.441630] Modules linked in: vrf nls_utf8 isofs nls_iso8859_1 dm_multipath scsi_dh_rdac scsi_dh_emc scsi_dh_alua intel_rapl_msr intel_rapl_common isst_if_mbox_msr isst_if_common nfit rapl input_leds joydev serio_raw qemu_fw_cfg mac_hid sch_fq_codel drm virtio_rng ip_tables x_tables autofs4 btrfs blake2b_generic zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel crypto_simd virtio_net net_failover cryptd psmouse virtio_blk failover i2c_piix4 pata_acpi floppy [ 901.450808] CR2: 0000000000000ba0 [ 901.451514] ---[ end trace c27b934b99ade304 ]--- [ 901.452403] RIP: 0010:vrf_ifindex_lookup_by_table_id+0x19/0x90 [vrf] [ 901.453626] Code: c1 e9 72 ff ff ff e8 96 49 01 c2 66 0f 1f 44 00 00 0f 1f 44 00 00 55 48 89 e5 41 56 41 55 41 89 f5 41 54 53 8b 05 47 4c 00 00 <48> 8b 97 a0 0b 00 00 48 8b 1c c2 e8 57 27 53 c1 4c 8d a3 88 00 00 [ 901.456910] RSP: 0018:ffffbf2d02043590 EFLAGS: 00010282 [ 901.457912] RAX: 000000000000000b RBX: ffff990808255e70 RCX: ffffbf2d02043aa8 [ 901.459238] RDX: 0000000000000001 RSI: 0000000000000001 RDI: 0000000000000000 [ 901.460552] RBP: ffffbf2d020435b0 R08: 00000000000000c0 R09: ffff990808255e40 [ 901.461882] R10: ffffffff83b08c90 R11: 0000000000000009 R12: 0000000000000000 [ 901.463208] R13: 0000000000000001 R14: 0000000000000000 R15: 000000000000000b [ 901.464529] FS: 00007fe49381f740(0000) GS:ffff99087dc00000(0000) knlGS:0000000000000000 [ 901.466058] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 901.467189] CR2: 0000000000000ba0 CR3: 000000000e3e8003 CR4: 0000000000770ef0 [ 901.468515] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 901.469858] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 901.471139] PKRU: 55555554 Signed-off-by: Ryoga Saito <contact@proelbtn.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-22octeontx2-af: Add additional register check to rvu_poll_reg()Smadar Fuks1-1/+11
[ Upstream commit 21274aa1781941884599a97ab59be7f8f36af98c ] Check one more time before exiting the API with an error. Fix API to poll at least twice, in case there are other high priority tasks and this API doesn't get CPU cycles for multiple jiffies update. In addition, increase timeout from usecs_to_jiffies(10000) to usecs_to_jiffies(20000), to prevent the case that for CONFIG_100HZ timeout will be a single jiffies. A single jiffies results actual timeout that can be any time between 1usec and 10msec. To solve this, a value of usecs_to_jiffies(20000) ensures that timeout is 2 jiffies. Signed-off-by: Smadar Fuks <smadarf@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-22watchdog: Start watchdog in watchdog_set_last_hw_keepalive only if appropriateJan Kiszka1-1/+4
[ Upstream commit dbe80cf471f940db3063197b7adb1169f89be9ed ] We must not pet a running watchdog when handle_boot_enabled is off because this will kick off automatic triggering before userland is running, defeating the purpose of the handle_boot_enabled control. Furthermore, don't ping in case watchdog_set_last_hw_keepalive was called incorrectly when the hardware watchdog is actually not running. Fixed: cef9572e9af3 ("watchdog: add support for adjusting last known HW keepalive time") Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/93d56386-6e37-060b-55ce-84de8cde535f@web.de Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-22PCI: Add ACS quirks for Cavium multi-function devicesGeorge Cherian1-0/+4
[ Upstream commit 32837d8a8f63eb95dcb9cd005524a27f06478832 ] Some Cavium endpoints are implemented as multi-function devices without ACS capability, but they actually don't support peer-to-peer transactions. Add ACS quirks to declare DMA isolation for the following devices: - BGX device found on Octeon-TX (8xxx) - CGX device found on Octeon-TX2 (9xxx) - RPM device found on Octeon-TX3 (10xxx) Link: https://lore.kernel.org/r/20210810122425.1115156-1-george.cherian@marvell.com Signed-off-by: George Cherian <george.cherian@marvell.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-22PCI: j721e: Add PCIe support for AM64Kishon Vijay Abraham I1-0/+19
[ Upstream commit c8a375a8e15ac31293d7fda08008d6da8f5df3db ] AM64 has the same PCIe IP as in J7200 with certain erratas not applicable (quirk_detect_quiet_flag). Add support for "ti,am64-pcie-host" compatible and "ti,am64-pcie-ep" compatible that is specific to AM64. Link: https://lore.kernel.org/r/20210811123336.31357-5-kishon@ti.com Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-22PCI: j721e: Add PCIe support for J7200Kishon Vijay Abraham I1-4/+36
[ Upstream commit f1de58802f0fff364cf49f5e47d1be744baa434f ] J7200 has the same PCIe IP as in J721E with minor changes in the wrapper. J7200 allows byte access of bridge configuration space registers and the register field for LINK_DOWN interrupt is different. J7200 also requires "quirk_detect_quiet_flag" to be set. Configure these changes as part of driver data applicable only to J7200. Link: https://lore.kernel.org/r/20210811123336.31357-4-kishon@ti.com Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-22PCI: cadence: Add quirk flag to set minimum delay in LTSSM Detect.Quiet stateNadeem Athani4-0/+38
[ Upstream commit 09c24094b2e3a15ef3fc44f54a191b3db522fb11 ] PCIe fails to link up if SERDES lanes not used by PCIe are assigned to another protocol. For example, link training fails if lanes 2 and 3 are assigned to another protocol while lanes 0 and 1 are used for PCIe to form a two lane link. This failure is due to an incorrect tie-off on an internal status signal indicating electrical idle. Status signals going from SERDES to PCIe Controller are tied-off when a lane is not assigned to PCIe. Signal indicating electrical idle is incorrectly tied-off to a state that indicates non-idle. As a result, PCIe sees unused lanes to be out of electrical idle and this causes LTSSM to exit Detect.Quiet state without waiting for 12ms timeout to occur. If a receiver is not detected on the first receiver detection attempt in Detect.Active state, LTSSM goes back to Detect.Quiet and again moves forward to Detect.Active state without waiting for 12ms as required by PCIe base specification. Since wait time in Detect.Quiet is skipped, multiple receiver detect operations are performed back-to-back without allowing time for capacitance on the transmit lines to discharge. This causes subsequent receiver detection to always fail even if a receiver gets connected eventually. Add a quirk flag "quirk_detect_quiet_flag" to program the minimum time the LTSSM should wait on entering Detect.Quiet state here. This has to be set for J7200 as it has an incorrect tie-off on unused lanes. Link: https://lore.kernel.org/r/20210811123336.31357-3-kishon@ti.com Signed-off-by: Nadeem Athani <nadeem@cadence.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-22PCI: cadence: Use bitfield for *quirk_retrain_flag* instead of boolKishon Vijay Abraham I2-2/+2
[ Upstream commit f4455748b2126a9ba2bcc9cfb2fbcaa08de29bb2 ] No functional change. As we are intending to add additional 1-bit members in struct j721e_pcie_data/struct cdns_pcie_rc, use bitfields instead of bool since it takes less space. As discussed in [1], the preference is to use bitfileds instead of bool inside structures. [1] -> https://lore.kernel.org/linux-fsdevel/CA+55aFzKQ6Pj18TB8p4Yr0M4t+S+BsiHH=BJNmn=76-NcjTj-g@mail.gmail.com/ Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/20210811123336.31357-2-kishon@ti.com Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-22tracing/probes: Reject events which have the same name of existing oneMasami Hiramatsu4-2/+36
[ Upstream commit 8e242060c6a4947e8ae7d29794af6a581db08841 ] Since kprobe_events and uprobe_events only check whether the other same-type probe event has the same name or not, if the user gives the same name of the existing tracepoint event (or the other type of probe events), it silently fails to create the tracefs entry (but registered.) as below. /sys/kernel/tracing # ls events/task/task_rename enable filter format hist id trigger /sys/kernel/tracing # echo p:task/task_rename vfs_read >> kprobe_events [ 113.048508] Could not create tracefs 'task_rename' directory /sys/kernel/tracing # cat kprobe_events p:task/task_rename vfs_read To fix this issue, check whether the existing events have the same name or not in trace_probe_register_event_call(). If exists, it rejects to register the new event. Link: https://lkml.kernel.org/r/162936876189.187130.17558311387542061930.stgit@devnote2 Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-22PCI: rcar: Fix runtime PM imbalance in rcar_pcie_ep_probe()Dinghao Liu1-2/+2
[ Upstream commit 1e29cd9983eba1b596bc07f94d81d728007f8a25 ] pm_runtime_get_sync() will increase the runtime PM counter even it returns an error. Thus a pairing decrement is needed to prevent refcount leak. Fix this by replacing this API with pm_runtime_resume_and_get(), which will not change the runtime PM counter on error. Link: https://lore.kernel.org/r/20210408072402.15069-1-dinghao.liu@zju.edu.cn Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-22mfd: Don't use irq_create_mapping() to resolve a mappingMarc Zyngier4-5/+5
[ Upstream commit 9ff80e2de36d0554e3a6da18a171719fe8663c17 ] Although irq_create_mapping() is able to deal with duplicate mappings, it really isn't supposed to be a substitute for irq_find_mapping(), and can result in allocations that take place in atomic context if the mapping didn't exist. Fix the handful of MFD drivers that use irq_create_mapping() in interrupt context by using irq_find_mapping() instead. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Lee Jones <lee.jones@linaro.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-22PCI: tegra: Fix OF node reference leakChristophe JAILLET1-5/+8
[ Upstream commit eff21f5da308265678e7e59821795e606f3e560f ] Commit 9e38e690ace3 ("PCI: tegra: Fix OF node reference leak") has fixed some node reference leaks in this function but missed some of them. In fact, having 'port' referenced in the 'rp' structure is not enough to prevent the leak, until 'rp' is actually added in the 'pcie->ports' list. Add the missing 'goto err_node_put' accordingly. Link: https://lore.kernel.org/r/55b11e9a7fa2987fbc0869d68ae59888954d65e2.1620148539.git.christophe.jaillet@wanadoo.fr Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-22PCI: tegra194: Fix MSI-X programmingOm Prakash Singh1-1/+1
[ Upstream commit 43537cf7e351264a1f05ed42ad402942bfc9140e ] Lower order MSI-X address is programmed in MSIX_ADDR_MATCH_HIGH_OFF DBI register instead of higher order address. This patch fixes this programming mistake. Link: https://lore.kernel.org/r/20210623100525.19944-3-omp@nvidia.com Signed-off-by: Om Prakash Singh <omp@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-22PCI: tegra194: Fix handling BME_CHGED eventOm Prakash Singh1-15/+15
[ Upstream commit ceb1412c1c8ca5b28c4252bdb15f2f1f17b4a1b0 ] In tegra_pcie_ep_hard_irq(), APPL_INTR_STATUS_L0 is stored in val and again APPL_INTR_STATUS_L1_0_0 is also stored in val. So when execution reaches "if (val & APPL_INTR_STATUS_L0_PCI_CMD_EN_INT)", val is not correct. Link: https://lore.kernel.org/r/20210623100525.19944-2-omp@nvidia.com Signed-off-by: Om Prakash Singh <omp@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-22fuse: fix use after free in fuse_read_interrupt()Miklos Szeredi1-2/+2
[ Upstream commit e1e71c168813564be0f6ea3d6740a059ca42d177 ] There is a potential race between fuse_read_interrupt() and fuse_request_end(). TASK1 in fuse_read_interrupt(): delete req->intr_entry (while holding fiq->lock) TASK2 in fuse_request_end(): req->intr_entry is empty -> skip fiq->lock wake up TASK3 TASK3 request is freed TASK1 in fuse_read_interrupt(): dereference req->in.h.unique ***BAM*** Fix by always grabbing fiq->lock if the request was ever interrupted (FR_INTERRUPTED set) thereby serializing with concurrent fuse_read_interrupt() calls. FR_INTERRUPTED is set before the request is queued on fiq->interrupts. Dequeing the request is done with list_del_init() but FR_INTERRUPTED is not cleared in this case. Reported-by: lijiazi <lijiazi@xiaomi.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-22PCI: Add ACS quirks for NXP LX2xx0 and LX2xx2 platformsWasim Khan2-1/+47
[ Upstream commit d08c8b855140e9f5240b3ffd1b8b9d435675e281 ] Root Ports in NXP LX2xx0 and LX2xx2, where each Root Port is a Root Complex with unique segment numbers, do provide isolation features to disable peer transactions and validate bus numbers in requests, but do not provide an actual PCIe ACS capability. Add ACS quirks for NXP LX2xx0 A/C/E/N and LX2xx2 A/C/E/N platforms. LX2xx0A : without security features + CAN-FD LX2160A (0x8d81) - 16 cores LX2120A (0x8da1) - 12 cores LX2080A (0x8d83) - 8 cores LX2xx0C : security features + CAN-FD LX2160C (0x8d80) - 16 cores LX2120C (0x8da0) - 12 cores LX2080C (0x8d82) - 8 cores LX2xx0E : security features + CAN LX2160E (0x8d90) - 16 cores LX2120E (0x8db0) - 12 cores LX2080E (0x8d92) - 8 cores LX2xx0N : without security features + CAN LX2160N (0x8d91) - 16 cores LX2120N (0x8db1) - 12 cores LX2080N (0x8d93) - 8 cores LX2xx2A : without security features + CAN-FD LX2162A (0x8d89) - 16 cores LX2122A (0x8da9) - 12 cores LX2082A (0x8d8b) - 8 cores LX2xx2C : security features + CAN-FD LX2162C (0x8d88) - 16 cores LX2122C (0x8da8) - 12 cores LX2082C (0x8d8a) - 8 cores LX2xx2E : security features + CAN LX2162E (0x8d98) - 16 cores LX2122E (0x8db8) - 12 cores LX2082E (0x8d9a) - 8 cores LX2xx2N : without security features + CAN LX2162N (0x8d99) - 16 cores LX2122N (0x8db9) - 12 cores LX2082N (0x8d9b) - 8 cores [bhelgaas: put PCI_VENDOR_ID_NXP definition next to PCI_VENDOR_ID_FREESCALE as a clue that they share the same Device ID namespace] Link: https://lore.kernel.org/r/20210729121747.1823086-1-wasim.khan@oss.nxp.com Link: https://lore.kernel.org/r/20210803180021.3252886-1-wasim.khan@oss.nxp.com Signed-off-by: Wasim Khan <wasim.khan@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-22mfd: db8500-prcmu: Adjust map to realityLinus Walleij1-8/+6
[ Upstream commit ec343111c056ec3847800302f6dbc57281f833fa ] These are the actual frequencies reported by the PLL, so let's report these. The roundoffs are inappropriate, we should round to the frequency that the clock will later report. Drop some whitespace at the same time. Cc: phone-devel@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-22dt-bindings: mtd: gpmc: Fix the ECC bytes vs. OOB bytes equationMiquel Raynal1-1/+1
[ Upstream commit 778cb8e39f6ec252be50fc3850d66f3dcbd5dd5a ] "PAGESIZE / 512" is the number of ECC chunks. "ECC_BYTES" is the number of bytes needed to store a single ECC code. "2" is the space reserved by the bad block marker. "2 + (PAGESIZE / 512) * ECC_BYTES" should of course be lower or equal than the total number of OOB bytes, otherwise it won't fit. Fix the equation by substituting s/>=/<=/. Suggested-by: Ryan J. Barnett <ryan.barnett@collins.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/linux-mtd/20210610143945.3504781-1-miquel.raynal@bootlin.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-22mm/memory_hotplug: use "unsigned long" for PFN in zone_for_pfn_range()David Hildenbrand2-4/+4
commit 7cf209ba8a86410939a24cb1aeb279479a7e0ca6 upstream. Patch series "mm/memory_hotplug: preparatory patches for new online policy and memory" These are all cleanups and one fix previously sent as part of [1]: [PATCH v1 00/12] mm/memory_hotplug: "auto-movable" online policy and memory groups. These patches make sense even without the other series, therefore I pulled them out to make the other series easier to digest. [1] https://lkml.kernel.org/r/20210607195430.48228-1-david@redhat.com This patch (of 4): Checkpatch complained on a follow-up patch that we are using "unsigned" here, which defaults to "unsigned int" and checkpatch is correct. As we will search for a fitting zone using the wrong pfn, we might end up onlining memory to one of the special kernel zones, such as ZONE_DMA, which can end badly as the onlined memory does not satisfy properties of these zones. Use "unsigned long" instead, just as we do in other places when handling PFNs. This can bite us once we have physical addresses in the range of multiple TB. Link: https://lkml.kernel.org/r/20210712124052.26491-2-david@redhat.com Fixes: e5e689302633 ("mm, memory_hotplug: display allowed zones in the preferred ordering") Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Pankaj Gupta <pankaj.gupta@ionos.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: David Hildenbrand <david@redhat.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com> Cc: Wei Yang <richard.weiyang@linux.alibaba.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Mike Rapoport <rppt@kernel.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Len Brown <lenb@kernel.org> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: virtualization@lists.linux-foundation.org Cc: Andy Lutomirski <luto@kernel.org> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> Cc: Anton Blanchard <anton@ozlabs.org> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Baoquan He <bhe@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Dave Jiang <dave.jiang@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jia He <justin.he@arm.com> Cc: Joe Perches <joe@perches.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Laurent Dufour <ldufour@linux.ibm.com> Cc: Michel Lespinasse <michel@lespinasse.org> Cc: Nathan Lynch <nathanl@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Pierre Morel <pmorel@linux.ibm.com> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: Rich Felker <dalias@libc.org> Cc: Scott Cheloha <cheloha@linux.ibm.com> Cc: Sergei Trofimovich <slyfox@gentoo.org> Cc: Thiago Jung Bauermann <bauerman@linux.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-22net: hns3: fix the timing issue of VF clearing interrupt sourcesJiaran Zhang1-3/+3
commit 427900d27d86b820c559037a984bd403f910860f upstream. Currently, the VF does not clear the interrupt source immediately after receiving the interrupt. As a result, if the second interrupt task is triggered when processing the first interrupt task, clearing the interrupt source before exiting will clear the interrupt sources of the two tasks at the same time. As a result, no interrupt is triggered for the second task. The VF detects the missed message only when the next interrupt is generated. Clearing it immediately after executing check_evt_cause ensures that: 1. Even if two interrupt tasks are triggered at the same time, they can be processed. 2. If the second task is triggered during the processing of the first task and the interrupt source is not cleared, the interrupt is reported after vector0 is enabled. Fixes: b90fcc5bd904 ("net: hns3: add reset handling for VF when doing Core/Global/IMP reset") Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-22