summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-01-27dmaengine: stm32-mdma: fix STM32_MDMA_CTBR_TSEL_MASKAmelie Delaunay1-1/+1
commit e7f110889a87307fb0fed408a5dee1707796ca04 upstream. This patch fixes STM32_MDMA_CTBR_TSEL_MASK, which is [5:0], not [7:0]. Fixes: a4ffb13c8946 ("dmaengine: Add STM32 MDMA driver") Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20211220165827.1238097-1-amelie.delaunay@foss.st.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27RDMA/rxe: Fix a typo in opcode nameChengguang Xu1-1/+1
commit 8d1cfb884e881efd69a3be4ef10772c71cb22216 upstream. There is a redundant ']' in the name of opcode IB_OPCODE_RC_SEND_MIDDLE, so just fix it. Fixes: 8700e3e7c485 ("Soft RoCE driver") Link: https://lore.kernel.org/r/20211218112320.3558770-1-cgxu519@mykernel.net Signed-off-by: Chengguang Xu <cgxu519@mykernel.net> Acked-by: Zhu Yanjun <zyjzyj2000@gmail.com> Reviewed-by: Bob Pearson <rpearsonhpe@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27RDMA/hns: Modify the mapping attribute of doorbell to deviceYixing Liu1-1/+1
commit 39d5534b1302189c809e90641ffae8cbdc42a8fc upstream. It is more general for ARM device drivers to use the device attribute to map PCI BAR spaces. Fixes: 9a4435375cd1 ("IB/hns: Add driver files for hns RoCE driver") Link: https://lore.kernel.org/r/20211206133652.27476-1-liangwenpeng@huawei.com Signed-off-by: Yixing Liu <liuyixing1@huawei.com> Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27scsi: core: Show SCMD_LAST in text formBart Van Assche1-0/+1
commit 3369046e54ca8f82e0cb17740643da2d80d3cfa8 upstream. The SCSI debugfs code supports showing information about pending commands, including translating SCSI command flags from numeric into text format. Also convert the SCMD_LAST flag from numeric into text form. Link: https://lore.kernel.org/r/20211129194609.3466071-4-bvanassche@acm.org Fixes: 8930a6c20791 ("scsi: core: add support for request batching") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27Documentation: fix firewire.rst ABI file path errorRandy Dunlap1-2/+2
commit b0ac702f3329cdc8a06dcaac73183d4b5a2b942d upstream. Adjust the path of the ABI files for firewire.rst to prevent a documentation build error. Prevents this problem: Sphinx parallel build error: docutils.utils.SystemMessage: Documentation/driver-api/firewire.rst:22: (SEVERE/4) Problems with "include" directive path: InputError: [Errno 2] No such file or directory: '../Documentation/driver-api/ABI/stable/firewire-cdev'. Fixes: 2f4830ef96d2 ("FireWire: add driver-api Introduction section") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Akira Yokosawa <akiyks@gmail.com> Link: https://lore.kernel.org/r/20220119033905.4779-1-rdunlap@infradead.org Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27Documentation: refer to config RANDOMIZE_BASE for kernel address-space ↵Lukas Bulwahn1-1/+1
randomization commit 82ca67321f55a8d1da6ac3ed611da3c32818bb37 upstream. The config RANDOMIZE_SLAB does not exist, the authors probably intended to refer to the config RANDOMIZE_BASE, which provides kernel address-space randomization. They probably just confused SLAB with BASE (these two four-letter words coincidentally share three common letters), as they also point out the config SLAB_FREELIST_RANDOM as further randomization within the same sentence. Fix the reference of the config for kernel address-space randomization to the config that provides that. Fixes: 6e88559470f5 ("Documentation: Add section about CPU vulnerabilities for Spectre") Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Link: https://lore.kernel.org/r/20211230171940.27558-1-lukas.bulwahn@gmail.com Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27Documentation: ACPI: Fix data node reference documentationSakari Ailus1-2/+8
commit a11174952205d082f1658fab4314f0caf706e0a8 upstream. The data node reference documentation was missing a package that must contain the property values, instead property name and multiple values being present in a single package. This is not aligned with the _DSD spec. Fix it by adding the package for the values. Also add the missing "reg" properties to two numbered nodes. Fixes: b10134a3643d ("ACPI: property: Document hierarchical data extension references") Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27Documentation: dmaengine: Correctly describe dmatest with channel unsetDaniel Thompson1-3/+4
commit c61d7b2ef141abf81140756b45860a2306f395a2 upstream. Currently the documentation states that channels must be configured before running the dmatest. This has not been true since commit 6b41030fdc79 ("dmaengine: dmatest: Restore default for channel"). Fix accordingly. Fixes: 6b41030fdc79 ("dmaengine: dmatest: Restore default for channel") Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Link: https://lore.kernel.org/r/20211118100952.27268-3-daniel.thompson@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27media: rcar-csi2: Optimize the selection PHTW registerSuresh Udipi1-1/+8
commit 549cc89cd09a85aaa16dc07ef3db811d5cf9bcb1 upstream. PHTW register is selected based on default bit rate from Table[1]. for the bit rates less than or equal to 250. Currently first value of default bit rate which is greater than or equal to the caculated mbps is selected. This selection can be further improved by selecting the default bit rate which is nearest to the calculated value. [1] specs r19uh0105ej0200-r-car-3rd-generation.pdf [Table 25.12] Fixes: 769afd212b16 ("media: rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver driver") Signed-off-by: Suresh Udipi <sudipi@jp.adit-jv.com> Signed-off-by: Michael Rodin <mrodin@de.adit-jv.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27firmware: Update Kconfig help text for Google firmwareBen Hutchings1-3/+3
commit d185a3466f0cd5af8f1c5c782c53bc0e6f2e7136 upstream. The help text for GOOGLE_FIRMWARE states that it should only be enabled when building a kernel for Google's own servers. However, many of the drivers dependent on it are also useful on Chromebooks or on any platform using coreboot. Update the help text to reflect this double duty. Fixes: d384d6f43d1e ("firmware: google memconsole: Add coreboot support") Reviewed-by: Julius Werner <jwerner@chromium.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Link: https://lore.kernel.org/r/20180618225540.GD14131@decadent.org.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27of: base: Improve argument length mismatch errorBaruch Siach1-3/+8
commit 5d05b811b5acb92fc581a7b328b36646c86f5ab9 upstream. The cells_name field of of_phandle_iterator might be NULL. Use the phandle name instead. With this change instead of: OF: /soc/pinctrl@1000000: (null) = 3 found 2 We get: OF: /soc/pinctrl@1000000: phandle pinctrl@1000000 needs 3, found 2 Which is a more helpful messages making DT debugging easier. In this particular example the phandle name looks like duplicate of the same node name. But note that the first node is the parent node (it->parent), while the second is the phandle target (it->node). They happen to be the same in the case that triggered this improvement. See commit 72cb4c48a46a ("arm64: dts: qcom: ipq6018: Fix gpio-ranges property"). Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/f6a68e0088a552ea9dfd4d8e3b5b586d92594738.1640881913.git.baruch@tkos.co.il Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27drm/radeon: fix error handling in radeon_driver_open_kmsChristian König1-10/+12
commit 4722f463896cc0ef1a6f1c3cb2e171e949831249 upstream. The return value was never initialized so the cleanup code executed when it isn't even necessary. Just add proper error handling. Fixes: ab50cb9df889 ("drm/radeon/radeon_kms: Fix a NULL pointer dereference in radeon_driver_open_kms()") Signed-off-by: Christian König <christian.koenig@amd.com> Tested-by: Jan Stancek <jstancek@redhat.com> Tested-by: Borislav Petkov <bp@suse.de> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27ext4: don't use the orphan list when migrating an inodeTheodore Ts'o1-15/+4
commit 6eeaf88fd586f05aaf1d48cb3a139d2a5c6eb055 upstream. We probably want to remove the indirect block to extents migration feature after a deprecation window, but until then, let's fix a potential data loss problem caused by the fact that we put the tmp_inode on the orphan list. In the unlikely case where we crash and do a journal recovery, the data blocks belonging to the inode being migrated are also represented in the tmp_inode on the orphan list --- and so its data blocks will get marked unallocated, and available for reuse. Instead, stop putting the tmp_inode on the oprhan list. So in the case where we crash while migrating the inode, we'll leak an inode, which is not a disaster. It will be easily fixed the next time we run fsck, and it's better than potentially having blocks getting claimed by two different files, and losing data as a result. Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Lukas Czerner <lczerner@redhat.com> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27ext4: Fix BUG_ON in ext4_bread when write quota dataYe Bin1-1/+1
commit 380a0091cab482489e9b19e07f2a166ad2b76d5c upstream. We got issue as follows when run syzkaller: [ 167.936972] EXT4-fs error (device loop0): __ext4_remount:6314: comm rep: Abort forced by user [ 167.938306] EXT4-fs (loop0): Remounting filesystem read-only [ 167.981637] Assertion failure in ext4_getblk() at fs/ext4/inode.c:847: '(EXT4_SB(inode->i_sb)->s_mount_state & EXT4_FC_REPLAY) || handle != NULL || create == 0' [ 167.983601] ------------[ cut here ]------------ [ 167.984245] kernel BUG at fs/ext4/inode.c:847! [ 167.984882] invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI [ 167.985624] CPU: 7 PID: 2290 Comm: rep Tainted: G B 5.16.0-rc5-next-20211217+ #123 [ 167.986823] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-ppc64le-16.ppc.fedoraproject.org-3.fc31 04/01/2014 [ 167.988590] RIP: 0010:ext4_getblk+0x17e/0x504 [ 167.989189] Code: c6 01 74 28 49 c7 c0 a0 a3 5c 9b b9 4f 03 00 00 48 c7 c2 80 9c 5c 9b 48 c7 c6 40 b6 5c 9b 48 c7 c7 20 a4 5c 9b e8 77 e3 fd ff <0f> 0b 8b 04 244 [ 167.991679] RSP: 0018:ffff8881736f7398 EFLAGS: 00010282 [ 167.992385] RAX: 0000000000000094 RBX: 1ffff1102e6dee75 RCX: 0000000000000000 [ 167.993337] RDX: 0000000000000001 RSI: ffffffff9b6e29e0 RDI: ffffed102e6dee66 [ 167.994292] RBP: ffff88816a076210 R08: 0000000000000094 R09: ffffed107363fa09 [ 167.995252] R10: ffff88839b1fd047 R11: ffffed107363fa08 R12: ffff88816a0761e8 [ 167.996205] R13: 0000000000000000 R14: 0000000000000021 R15: 0000000000000001 [ 167.997158] FS: 00007f6a1428c740(0000) GS:ffff88839b000000(0000) knlGS:0000000000000000 [ 167.998238] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 167.999025] CR2: 00007f6a140716c8 CR3: 0000000133216000 CR4: 00000000000006e0 [ 167.999987] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 168.000944] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 168.001899] Call Trace: [ 168.002235] <TASK> [ 168.007167] ext4_bread+0xd/0x53 [ 168.007612] ext4_quota_write+0x20c/0x5c0 [ 168.010457] write_blk+0x100/0x220 [ 168.010944] remove_free_dqentry+0x1c6/0x440 [ 168.011525] free_dqentry.isra.0+0x565/0x830 [ 168.012133] remove_tree+0x318/0x6d0 [ 168.014744] remove_tree+0x1eb/0x6d0 [ 168.017346] remove_tree+0x1eb/0x6d0 [ 168.019969] remove_tree+0x1eb/0x6d0 [ 168.022128] qtree_release_dquot+0x291/0x340 [ 168.023297] v2_release_dquot+0xce/0x120 [ 168.023847] dquot_release+0x197/0x3e0 [ 168.024358] ext4_release_dquot+0x22a/0x2d0 [ 168.024932] dqput.part.0+0x1c9/0x900 [ 168.025430] __dquot_drop+0x120/0x190 [ 168.025942] ext4_clear_inode+0x86/0x220 [ 168.026472] ext4_evict_inode+0x9e8/0xa22 [ 168.028200] evict+0x29e/0x4f0 [ 168.028625] dispose_list+0x102/0x1f0 [ 168.029148] evict_inodes+0x2c1/0x3e0 [ 168.030188] generic_shutdown_super+0xa4/0x3b0 [ 168.030817] kill_block_super+0x95/0xd0 [ 168.031360] deactivate_locked_super+0x85/0xd0 [ 168.031977] cleanup_mnt+0x2bc/0x480 [ 168.033062] task_work_run+0xd1/0x170 [ 168.033565] do_exit+0xa4f/0x2b50 [ 168.037155] do_group_exit+0xef/0x2d0 [ 168.037666] __x64_sys_exit_group+0x3a/0x50 [ 168.038237] do_syscall_64+0x3b/0x90 [ 168.038751] entry_SYSCALL_64_after_hwframe+0x44/0xae In order to reproduce this problem, the following conditions need to be met: 1. Ext4 filesystem with no journal; 2. Filesystem image with incorrect quota data; 3. Abort filesystem forced by user; 4. umount filesystem; As in ext4_quota_write: ... if (EXT4_SB(sb)->s_journal && !handle) { ext4_msg(sb, KERN_WARNING, "Quota write (off=%llu, len=%llu)" " cancelled because transaction is not started", (unsigned long long)off, (unsigned long long)len); return -EIO; } ... We only check handle if NULL when filesystem has journal. There is need check handle if NULL even when filesystem has no journal. Signed-off-by: Ye Bin <yebin10@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20211223015506.297766-1-yebin10@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27ext4: set csum seed in tmp inode while migrating to extentsLuís Henriques1-1/+11
commit e81c9302a6c3c008f5c30beb73b38adb0170ff2d upstream. When migrating to extents, the temporary inode will have it's own checksum seed. This means that, when swapping the inodes data, the inode checksums will be incorrect. This can be fixed by recalculating the extents checksums again. Or simply by copying the seed into the temporary inode. Link: https://bugzilla.kernel.org/show_bug.cgi?id=213357 Reported-by: Jeroen van Wolffelaar <jeroen@wolffelaar.nl> Signed-off-by: Luís Henriques <lhenriques@suse.de> Link: https://lore.kernel.org/r/20211214175058.19511-1-lhenriques@suse.de Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27ext4: make sure quota gets properly shutdown on errorJan Kara1-4/+6
commit 15fc69bbbbbc8c72e5f6cc4e1be0f51283c5448e upstream. When we hit an error when enabling quotas and setting inode flags, we do not properly shutdown quota subsystem despite returning error from Q_QUOTAON quotactl. This can lead to some odd situations like kernel using quota file while it is still writeable for userspace. Make sure we properly cleanup the quota subsystem in case of error. Signed-off-by: Jan Kara <jack@suse.cz> Cc: stable@kernel.org Link: https://lore.kernel.org/r/20211007155336.12493-2-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27ext4: make sure to reset inode lockdep class when quota enabling failsJan Kara1-1/+12
commit 4013d47a5307fdb5c13370b5392498b00fedd274 upstream. When we succeed in enabling some quota type but fail to enable another one with quota feature, we correctly disable all enabled quota types. However we forget to reset i_data_sem lockdep class. When the inode gets freed and reused, it will inherit this lockdep class (i_data_sem is initialized only when a slab is created) and thus eventually lockdep barfs about possible deadlocks. Reported-and-tested-by: syzbot+3b6f9218b1301ddda3e2@syzkaller.appspotmail.com Signed-off-by: Jan Kara <jack@suse.cz> Cc: stable@kernel.org Link: https://lore.kernel.org/r/20211007155336.12493-3-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27btrfs: respect the max size in the header when activating swap fileFilipe Manana1-0/+11
commit c2f822635df873c510bda6fb7fd1b10b7c31be2d upstream. If we extended the size of a swapfile after its header was created (by the mkswap utility) and then try to activate it, we will map the entire file when activating the swap file, instead of limiting to the max size defined in the swap file's header. Currently test case generic/643 from fstests fails because we do not respect that size limit defined in the swap file's header. So fix this by not mapping file ranges beyond the max size defined in the swap header. This is the same type of bug that iomap used to have, and was fixed in commit 36ca7943ac18ae ("mm/swap: consider max pages in iomap_swapfile_add_extent"). Fixes: ed46ff3d423780 ("Btrfs: support swap files") CC: stable@vger.kernel.org # 5.4+ Reviewed-and-tested-by: Josef Bacik <josef@toxicpanda.com Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27btrfs: check the root node for uptodate before returning itJosef Bacik1-4/+15
commit 120de408e4b97504a2d9b5ca534b383de2c73d49 upstream. Now that we clear the extent buffer uptodate if we fail to write it out we need to check to see if our root node is uptodate before we search down it. Otherwise we could return stale data (or potentially corrupt data that was caught by the write verification step) and think that the path is OK to search down. CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27btrfs: fix deadlock between quota enable and other quota operationsFilipe Manana1-0/+19
commit 232796df8c1437c41d308d161007f0715bac0a54 upstream. When enabling quotas, we attempt to commit a transaction while holding the mutex fs_info->qgroup_ioctl_lock. This can result on a deadlock with other quota operations such as: - qgroup creation and deletion, ioctl BTRFS_IOC_QGROUP_CREATE; - adding and removing qgroup relations, ioctl BTRFS_IOC_QGROUP_ASSIGN. This is because these operations join a transaction and after that they attempt to lock the mutex fs_info->qgroup_ioctl_lock. Acquiring that mutex after joining or starting a transaction is a pattern followed everywhere in qgroups, so the quota enablement operation is the one at fault here, and should not commit a transaction while holding that mutex. Fix this by making the transaction commit while not holding the mutex. We are safe from two concurrent tasks trying to enable quotas because we are serialized by the rw semaphore fs_info->subvol_sem at btrfs_ioctl_quota_ctl(), which is the only call site for enabling quotas. When this deadlock happens, it produces a trace like the following: INFO: task syz-executor:25604 blocked for more than 143 seconds. Not tainted 5.15.0-rc6 #4 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:syz-executor state:D stack:24800 pid:25604 ppid: 24873 flags:0x00004004 Call Trace: context_switch kernel/sched/core.c:4940 [inline] __schedule+0xcd9/0x2530 kernel/sched/core.c:6287 schedule+0xd3/0x270 kernel/sched/core.c:6366 btrfs_commit_transaction+0x994/0x2e90 fs/btrfs/transaction.c:2201 btrfs_quota_enable+0x95c/0x1790 fs/btrfs/qgroup.c:1120 btrfs_ioctl_quota_ctl fs/btrfs/ioctl.c:4229 [inline] btrfs_ioctl+0x637e/0x7b70 fs/btrfs/ioctl.c:5010 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:874 [inline] __se_sys_ioctl fs/ioctl.c:860 [inline] __x64_sys_ioctl+0x193/0x200 fs/ioctl.c:860 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f86920b2c4d RSP: 002b:00007f868f61ac58 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007f86921d90a0 RCX: 00007f86920b2c4d RDX: 0000000020005e40 RSI: 00000000c0109428 RDI: 0000000000000008 RBP: 00007f869212bd80 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f86921d90a0 R13: 00007fff6d233e4f R14: 00007fff6d233ff0 R15: 00007f868f61adc0 INFO: task syz-executor:25628 blocked for more than 143 seconds. Not tainted 5.15.0-rc6 #4 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:syz-executor state:D stack:29080 pid:25628 ppid: 24873 flags:0x00004004 Call Trace: context_switch kernel/sched/core.c:4940 [inline] __schedule+0xcd9/0x2530 kernel/sched/core.c:6287 schedule+0xd3/0x270 kernel/sched/core.c:6366 schedule_preempt_disabled+0xf/0x20 kernel/sched/core.c:6425 __mutex_lock_common kernel/locking/mutex.c:669 [inline] __mutex_lock+0xc96/0x1680 kernel/locking/mutex.c:729 btrfs_remove_qgroup+0xb7/0x7d0 fs/btrfs/qgroup.c:1548 btrfs_ioctl_qgroup_create fs/btrfs/ioctl.c:4333 [inline] btrfs_ioctl+0x683c/0x7b70 fs/btrfs/ioctl.c:5014 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:874 [inline] __se_sys_ioctl fs/ioctl.c:860 [inline] __x64_sys_ioctl+0x193/0x200 fs/ioctl.c:860 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae Reported-by: Hao Sun <sunhao.th@gmail.com> Link: https://lore.kernel.org/linux-btrfs/CACkBjsZQF19bQ1C6=yetF3BvL10OSORpFUcWXTP6HErshDB4dQ@mail.gmail.com/ Fixes: 340f1aa27f36 ("btrfs: qgroups: Move transaction management inside btrfs_quota_enable/disable") CC: stable@vger.kernel.org # 4.19 Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27xfrm: fix policy lookup for ipv6 gre packetsGhalem Boudour2-1/+25
commit bcf141b2eb551b3477b24997ebc09c65f117a803 upstream. On egress side, xfrm lookup is called from __gre6_xmit() with the fl6_gre_key field not initialized leading to policies selectors check failure. Consequently, gre packets are sent without encryption. On ingress side, INET6_PROTO_NOPOLICY was set, thus packets were not checked against xfrm policies. Like for egress side, fl6_gre_key should be correctly set, this is now done in decode_session6(). Fixes: c12b395a4664 ("gre: Support GRE over IPv6") Cc: stable@vger.kernel.org Signed-off-by: Ghalem Boudour <ghalem.boudour@6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27PCI: pci-bridge-emul: Set PCI_STATUS_CAP_LIST for PCIe devicePali Rohár1-0/+1
commit 3be9d243b21724d49b65043d4520d688b6040b36 upstream. Since all PCI Express device Functions are required to implement the PCI Express Capability structure, Capabilities List bit in PCI Status Register must be hardwired to 1b. Capabilities Pointer register (which is already set by pci-bride-emul.c driver) is valid only when Capabilities List is set to 1b. Link: https://lore.kernel.org/r/20211124155944.1290-7-pali@kernel.org Fixes: 23a5fba4d941 ("PCI: Introduce PCI bridge emulated config space common logic") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27PCI: pci-bridge-emul: Correctly set PCIe capabilitiesPali Rohár3-5/+12
commit 1f1050c5e1fefb34ac90a506b43e9da803b5f8f7 upstream. Older mvebu hardware provides PCIe Capability structure only in version 1. New mvebu and aardvark hardware provides it in version 2. So do not force version to 2 in pci_bridge_emul_init() and rather allow drivers to set correct version. Drivers need to set version in pcie_conf.cap field without overwriting PCI_CAP_LIST_ID register. Both drivers (mvebu and aardvark) do not provide slot support yet, so do not set PCI_EXP_FLAGS_SLOT flag. Link: https://lore.kernel.org/r/20211124155944.1290-6-pali@kernel.org Fixes: 23a5fba4d941 ("PCI: Introduce PCI bridge emulated config space common logic") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27PCI: pci-bridge-emul: Properly mark reserved PCIe bits in PCI config spacePali Rohár1-0/+21
commit 7b067ac63a5730d2fae18399fed7e45f23d36912 upstream. Some bits in PCI config space are reserved when device is PCIe. Properly define behavior of PCI registers for PCIe emulated bridge and ensure that it would not be possible change these reserved bits. Link: https://lore.kernel.org/r/20211124155944.1290-3-pali@kernel.org Fixes: 23a5fba4d941 ("PCI: Introduce PCI bridge emulated config space common logic") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27drm/bridge: analogix_dp: Make PSR-exit block lessBrian Norris1-2/+12
commit c4c6ef229593366ab593d4d424addc7025b54a76 upstream. Prior to commit 6c836d965bad ("drm/rockchip: Use the helpers for PSR"), "PSR exit" used non-blocking analogix_dp_send_psr_spd(). The refactor started using the blocking variant, for a variety of reasons -- quoting Sean Paul's potentially-faulty memory: """ - To avoid racing a subsequent PSR entry (if exit takes a long time) - To avoid racing disable/modeset - We're not displaying new content while exiting PSR anyways, so there is minimal utility in allowing frames to be submitted - We're lying to userspace telling them frames are on the screen when we're just dropping them on the floor """ However, I'm finding that this blocking transition is causing upwards of 60+ ms of unneeded latency on PSR-exit, to the point that initial cursor movements when leaving PSR are unbearably jumpy. It turns out that we need to meet in the middle somewhere: Sean is right that we were "lying to userspace" with a non-blocking PSR-exit, but the new blocking behavior is also waiting too long: According to the eDP specification, the sink device must support PSR entry transitions from both state 4 (ACTIVE_RESYNC) and state 0 (INACTIVE). It also states that in ACTIVE_RESYNC, "the Sink device must display the incoming active frames from the Source device with no visible glitches and/or artifacts." Thus, for our purposes, we only need to wait for ACTIVE_RESYNC before moving on; we are ready to display video, and subsequent PSR-entry is safe. Tested on a Samsung Chromebook Plus (i.e., Rockchip RK3399 Gru Kevin), where this saves about 60ms of latency, for PSR-exit that used to take about 80ms. Fixes: 6c836d965bad ("drm/rockchip: Use the helpers for PSR") Cc: <stable@vger.kernel.org> Cc: Zain Wang <wzz@rock-chips.com> Cc: Tomasz Figa <tfiga@chromium.org> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Sean Paul <seanpaul@chromium.org> Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211103135112.v3.1.I67612ea073c3306c71b46a87be894f79707082df@changeid Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27drm/nouveau/kms/nv04: use vzalloc for nv04_displayIlia Mirkin1-2/+2
commit bd6e07e72f37f34535bec7eebc807e5fcfe37b43 upstream. The struct is giant, and triggers an order-7 allocation (512K). There is no reason for this to be kmalloc-type memory, so switch to vmalloc. This should help loading nouveau on low-memory and/or long-running systems. Reported-by: Nathan E. Egge <unlord@xiph.org> Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Cc: stable@vger.kernel.org Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Reviewed-by: Karol Herbst <kherbst@redhat.com> Signed-off-by: Karol Herbst <kherbst@redhat.com> Link: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests/10 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27drm/etnaviv: limit submit sizesLucas Stach1-0/+6
commit 6dfa2fab8ddd46faa771a102672176bee7a065de upstream. Currently we allow rediculous amounts of kernel memory being allocated via the etnaviv GEM_SUBMIT ioctl, which is a pretty easy DoS vector. Put some reasonable limits in to fix this. The commandstream size is limited to 64KB, which was already a soft limit on older kernels after which the kernel only took submits on a best effort base, so there is no userspace that tries to submit commandstreams larger than this. Even if the whole commandstream is a single incrementing address load, the size limit also limits the number of potential relocs and referenced buffers to slightly under 64K, so use the same limit for those arguments. The performance monitoring infrastructure currently supports less than 50 performance counter signals, so limiting them to 128 on a single submit seems like a reasonably future-proof number for now. This number can be bumped if needed without breaking the interface. Cc: stable@vger.kernel.org Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27s390/mm: fix 2KB pgtable release raceAlexander Gordeev1-1/+3
commit c2c224932fd0ee6854d6ebfc8d059c2bcad86606 upstream. There is a race on concurrent 2KB-pgtables release paths when both upper and lower halves of the containing parent page are freed, one via page_table_free_rcu() + __tlb_remove_table(), and the other via page_table_free(). The race might lead to a corruption as result of remove of list item in page_table_free() concurrently with __free_page() in __tlb_remove_table(). Let's assume first the lower and next the upper 2KB-pgtables are freed from a page. Since both halves of the page are allocated the tracking byte (bits 24-31 of the page _refcount) has value of 0x03 initially: CPU0 CPU1 ---- ---- page_table_free_rcu() // lower half { // _refcount[31..24] == 0x03 ... atomic_xor_bits(&page->_refcount, 0x11U << (0 + 24)); // _refcount[31..24] <= 0x12 ... table = table | (1U << 0); tlb_remove_table(tlb, table); } ... __tlb_remove_table() { // _refcount[31..24] == 0x12 mask = _table & 3; // mask <= 0x01 ... page_table_free() // upper half { // _refcount[31..24] == 0x12 ... atomic_xor_bits( &page->_refcount, 1U << (1 + 24)); // _refcount[31..24] <= 0x10 // mask <= 0x10 ... atomic_xor_bits(&page->_refcount, mask << (4 + 24)); // _refcount[31..24] <= 0x00 // mask <= 0x00 ... if (mask != 0) // == false break; fallthrough; ... if (mask & 3) // == false ... else __free_page(page); list_del(&page->lru); ^^^^^^^^^^^^^^^^^^ RACE! ^^^^^^^^^^^^^^^^^^^^^ } ... } The problem is page_table_free() releases the page as result of lower nibble unset and __tlb_remove_table() observing zero too early. With this update page_table_free() will use the similar logic as page_table_free_rcu() + __tlb_remove_table(), and mark the fragment as pending for removal in the upper nibble until after the list_del(). In other words, the parent page is considered as unreferenced and safe to release only when the lower nibble is cleared already and unsetting a bit in upper nibble results in that nibble turned zero. Cc: stable@vger.kernel.org Suggested-by: Vlastimil Babka <vbabka@suse.com> Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27iwlwifi: mvm: Increase the scan timeout guard to 30 secondsIlan Peer1-1/+1
commit ced50f1133af12f7521bb777fcf4046ca908fb77 upstream. With the introduction of 6GHz channels the scan guard timeout should be adjusted to account for the following extreme case: - All 6GHz channels are scanned passively: 58 channels. - The scan is fragmented with the following parameters: 3 fragments, 95 TUs suspend time, 44 TUs maximal out of channel time. The above would result with scan time of more than 24 seconds. Thus, set the timeout to 30 seconds. Cc: stable@vger.kernel.org Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211210090244.3c851b93aef5.I346fa2e1d79220a6770496e773c6f87a2ad9e6c4@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27tracing/kprobes: 'nmissed' not showed correctly for kretprobeXiangyang Zhang1-1/+4
commit dfea08a2116fe327f79d8f4d4b2cf6e0c88be11f upstream. The 'nmissed' column of the 'kprobe_profile' file for kretprobe is not showed correctly, kretprobe can be skipped by two reasons, shortage of kretprobe_instance which is counted by tk->rp.nmissed, and kprobe itself is missed by some reason, so to show the sum. Link: https://lkml.kernel.org/r/20220107150242.5019-1-xyz.sun.ok@gmail.com Cc: stable@vger.kernel.org Fixes: 4a846b443b4e ("tracing/kprobes: Cleanup kprobe tracer code") Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Xiangyang Zhang <xyz.sun.ok@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27cputime, cpuacct: Include guest time in user time in cpuacct.statAndrey Ryabinin1-2/+2
commit 9731698ecb9c851f353ce2496292ff9fcea39dff upstream. cpuacct.stat in no-root cgroups shows user time without guest time included int it. This doesn't match with user time shown in root cpuacct.stat and /proc/<pid>/stat. This also affects cgroup2's cpu.stat in the same way. Make account_guest_time() to add user time to cgroup's cpustat to fix this. Fixes: ef12fefabf94 ("cpuacct: add per-cgroup utime/stime statistics") Signed-off-by: Andrey Ryabinin <arbn@yandex-team.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Acked-by: Tejun Heo <tj@kernel.org> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211115164607.23784-1-arbn@yandex-team.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27serial: Fix incorrect rs485 polarity on uart openLukas Wunner1-2/+2
commit d3b3404df318504ec084213ab1065b73f49b0f1d upstream. Commit a6845e1e1b78 ("serial: core: Consider rs485 settings to drive RTS") sought to deassert RTS when opening an rs485-enabled uart port. That way, the transceiver does not occupy the bus until it transmits data. Unfortunately, the commit mixed up the logic and *asserted* RTS instead of *deasserting* it: The commit amended uart_port_dtr_rts(), which raises DTR and RTS when opening an rs232 port. "Raising" actually means lowering the signal that's coming out of the uart, because an rs232 transceiver not only changes a signal's voltage level, it also *inverts* the signal. See the simplified schematic in the MAX232 datasheet for an example: https://www.ti.com/lit/ds/symlink/max232.pdf So, to raise RTS on an rs232 port, TIOCM_RTS is *set* in port->mctrl and that results in the signal being driven low. In contrast to rs232, the signal level for rs485 Transmit Enable is the identity, not the inversion: If the transceiver expects a "high" RTS signal for Transmit Enable, the signal coming out of the uart must also be high, so TIOCM_RTS must be *cleared* in port->mctrl. The commit did the exact opposite, but it's easy to see why given the confusing semantics of rs232 and rs485. Fix it. Fixes: a6845e1e1b78 ("serial: core: Consider rs485 settings to drive RTS") Cc: stable@vger.kernel.org # v4.14+ Cc: Rafael Gago Castano <rgc@hms.se> Cc: Jan Kiszka <jan.kiszka@siemens.com> Cc: Su Bao Cheng <baocheng.su@siemens.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Link: https://lore.kernel.org/r/9395767847833f2f3193c49cde38501eeb3b5669.1639821059.git.lukas@wunner.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27fuse: Pass correct lend value to filemap_write_and_wait_range()Xie Yongji1-1/+1
commit e388164ea385f04666c4633f5dc4f951fca71890 upstream. The acceptable maximum value of lend parameter in filemap_write_and_wait_range() is LLONG_MAX rather than -1. And there is also some logic depending on LLONG_MAX check in write_cache_pages(). So let's pass LLONG_MAX to filemap_write_and_wait_range() in fuse_writeback_range() instead. Fixes: 59bda8ecee2f ("fuse: flush extending writes") Signed-off-by: Xie Yongji <xieyongji@bytedance.com> Cc: <stable@vger.kernel.org> # v5.15 Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27ubifs: Error path in ubifs_remount_rw() seems to wrongly free write buffersPetr Cvachoucek1-1/+0
commit 3fea4d9d160186617ff40490ae01f4f4f36b28ff upstream. it seems freeing the write buffers in the error path of the ubifs_remount_rw() is wrong. It leads later to a kernel oops like this: [10016.431274] UBIFS (ubi0:0): start fixing up free space [10090.810042] UBIFS (ubi0:0): free space fixup complete [10090.814623] UBIFS error (ubi0:0 pid 512): ubifs_remount_fs: cannot spawn "ubifs_bgt0_0", error -4 [10101.915108] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 517 [10105.275498] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000030 [10105.284352] Mem abort info: [10105.287160] ESR = 0x96000006 [10105.290252] EC = 0x25: DABT (current EL), IL = 32 bits [10105.295592] SET = 0, FnV = 0 [10105.298652] EA = 0, S1PTW = 0 [10105.301848] Data abort info: [10105.304723] ISV = 0, ISS = 0x00000006 [10105.308573] CM = 0, WnR = 0 [10105.311564] user pgtable: 4k pages, 48-bit VAs, pgdp=00000000f03d1000 [10105.318034] [0000000000000030] pgd=00000000f6cee003, pud=00000000f4884003, pmd=0000000000000000 [10105.326783] Internal error: Oops: 96000006 [#1] PREEMPT SMP [10105.332355] Modules linked in: ath10k_pci ath10k_core ath mac80211 libarc4 cfg80211 nvme nvme_core cryptodev(O) [10105.342468] CPU: 3 PID: 518 Comm: touch Tainted: G O 5.4.3 #1 [10105.349517] Hardware name: HYPEX CPU (DT) [10105.353525] pstate: 40000005 (nZcv daif -PAN -UAO) [10105.358324] pc : atomic64_try_cmpxchg_acquire.constprop.22+0x8/0x34 [10105.364596] lr : mutex_lock+0x1c/0x34 [10105.368253] sp : ffff000075633aa0 [10105.371563] x29: ffff000075633aa0 x28: 0000000000000001 [10105.376874] x27: ffff000076fa80c8 x26: 0000000000000004 [10105.382185] x25: 0000000000000030 x24: 0000000000000000 [10105.387495] x23: 0000000000000000 x22: 0000000000000038 [10105.392807] x21: 000000000000000c x20: ffff000076fa80c8 [10105.398119] x19: ffff000076fa8000 x18: 0000000000000000 [10105.403429] x17: 0000000000000000 x16: 0000000000000000 [10105.408741] x15: 0000000000000000 x14: fefefefefefefeff [10105.414052] x13: 0000000000000000 x12: 0000000000000fe0 [10105.419364] x11: 0000000000000fe0 x10: ffff000076709020 [10105.424675] x9 : 0000000000000000 x8 : 00000000000000a0 [10105.429986] x7 : ffff000076fa80f4 x6 : 0000000000000030 [10105.435297] x5 : 0000000000000000 x4 : 0000000000000000 [10105.440609] x3 : 0000000000000000 x2 : ffff00006f276040 [10105.445920] x1 : ffff000075633ab8 x0 : 0000000000000030 [10105.451232] Call trace: [10105.453676] atomic64_try_cmpxchg_acquire.constprop.22+0x8/0x34 [10105.459600] ubifs_garbage_collect+0xb4/0x334 [10105.463956] ubifs_budget_space+0x398/0x458 [10105.468139] ubifs_create+0x50/0x180 [10105.471712] path_openat+0x6a0/0x9b0 [10105.475284] do_filp_open+0x34/0x7c [10105.478771] do_sys_open+0x78/0xe4 [10105.482170] __arm64_sys_openat+0x1c/0x24 [10105.486180] el0_svc_handler+0x84/0xc8 [10105.489928] el0_svc+0x8/0xc [10105.492808] Code: 52800013 17fffffb d2800003 f9800011 (c85ffc05) [10105.498903] ---[ end trace 46b721d93267a586 ]--- To reproduce the problem: 1. Filesystem initially mounted read-only, free space fixup flag set. 2. mount -o remount,rw <mountpoint> 3. it takes some time (free space fixup running) ... try to terminate running mount by CTRL-C ... does not respond, only after free space fixup is complete ... then "ubifs_remount_fs: cannot spawn "ubifs_bgt0_0", error -4" 4. mount -o remount,rw <mountpoint> ... now finished instantly (fixup already done). 5. Create file or just unmount the filesystem and we get the oops. Cc: <stable@vger.kernel.org> Fixes: b50b9f408502 ("UBIFS: do not free write-buffers when in R/O mode") Signed-off-by: Petr Cvachoucek <cvachoucek@gmail.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27crypto: caam - replace this_cpu_ptr with raw_cpu_ptrMeng Li1-1/+1
commit efd21e10fc3bf4c6da122470a5ae89ec4ed8d180 upstream. When enable the kernel debug config, there is below calltrace detected: BUG: using smp_processor_id() in preemptible [00000000] code: cryptomgr_test/339 caller is debug_smp_processor_id+0x20/0x30 CPU: 9 PID: 339 Comm: cryptomgr_test Not tainted 5.10.63-yocto-standard #1 Hardware name: NXP Layerscape LX2160ARDB (DT) Call trace: dump_backtrace+0x0/0x1a0 show_stack+0x24/0x30 dump_stack+0xf0/0x13c check_preemption_disabled+0x100/0x110 debug_smp_processor_id+0x20/0x30 dpaa2_caam_enqueue+0x10c/0x25c ...... cryptomgr_test+0x38/0x60 kthread+0x158/0x164 ret_from_fork+0x10/0x38 According to the comment in commit ac5d15b4519f("crypto: caam/qi2 - use affine DPIOs "), because preemption is no longer disabled while trying to enqueue an FQID, it might be possible to run the enqueue on a different CPU(due to migration, when in process context), however this wouldn't be a functionality issue. But there will be above calltrace when enable kernel debug config. So, replace this_cpu_ptr with raw_cpu_ptr to avoid above call trace. Fixes: ac5d15b4519f ("crypto: caam/qi2 - use affine DPIOs") Cc: stable@vger.kernel.org Signed-off-by: Meng Li <Meng.Li@windriver.com> Reviewed-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27crypto: stm32/crc32 - Fix kernel BUG triggered in probe()Marek Vasut1-2/+2
commit 29009604ad4e3ef784fd9b9fef6f23610ddf633d upstream. The include/linux/crypto.h struct crypto_alg field cra_driver_name description states "Unique name of the transformation provider. " ... " this contains the name of the chip or provider and the name of the transformation algorithm." In case of the stm32-crc driver, field cra_driver_name is identical for all registered transformation providers and set to the name of the driver itself, which is incorrect. This patch fixes it by assigning a unique cra_driver_name to each registered transformation provider. The kernel crash is triggered when the driver calls crypto_register_shashes() which calls crypto_register_shash(), which calls crypto_register_alg(), which calls __crypto_register_alg(), which returns -EEXIST, which is propagated back through this call chain. Upon -EEXIST from crypto_register_shash(), the crypto_register_shashes() starts unregistering the providers back, and calls crypto_unregister_shash(), which calls crypto_unregister_alg(), and this is where the BUG() triggers due to incorrect cra_refcnt. Fixes: b51dbe90912a ("crypto: stm32 - Support for STM32 CRC32 crypto module") Signed-off-by: Marek Vasut <marex@denx.de> Cc: <stable@vger.kernel.org> # 4.12+ Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Fabien Dessenne <fabien.dessenne@st.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Lionel Debieve <lionel.debieve@st.com> Cc: Nicolas Toromanoff <nicolas.toromanoff@st.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-crypto@vger.kernel.org Acked-by: Nicolas Toromanoff <nicolas.toromanoff@foss.st.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27crypto: omap-aes - Fix broken pm_runtime_and_get() usageHeiner Kallweit1-1/+1
commit c2aec59be093bd44627bc4f6bc67e4614a93a7b6 upstream. This fix is basically the same as 3d6b661330a7 ("crypto: stm32 - Revert broken pm_runtime_resume_and_get changes"), just for the omap driver. If the return value isn't used, then pm_runtime_get_sync() has to be used for ensuring that the usage count is balanced. Fixes: 1f34cc4a8da3 ("crypto: omap-aes - Fix PM reference leak on omap-aes.c") Cc: stable@vger.kernel.org Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27rpmsg: core: Clean up resources on announce_create failure.Arnaud Pouliquen1-4/+16
commit 8066c615cb69b7da8a94f59379847b037b3a5e46 upstream. During the rpmsg_dev_probe, if rpdev->ops->announce_create returns an error, the rpmsg device and default endpoint should be freed before exiting the function. Fixes: 5e619b48677c ("rpmsg: Split rpmsg cor