| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Link: https://lore.kernel.org/r/20260408175933.715315542@linuxfoundation.org
Tested-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Tested-by: Peter Schneider <pschneider1968@googlemail.com>
Tested-by: Pavel Machek (CIP) <pavel@nabladev.com>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Barry K. Nathan <barryn@pobox.com>
Tested-by: Josh Law <joshlaw48@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0e6b6dedf16800df0ff73ffe2bb5066514db29c2 upstream.
After starting to install the EC address space handler at the ACPI
namespace root, if there is an "orphan" _REG method in the EC device's
scope, it will not be evaluated any more. This breaks EC operation
regions on some systems, like Asus gu605.
To address this, use a wrapper around an existing ACPICA function to
look for an "orphan" _REG method in the EC device scope and evaluate
it if present.
Fixes: 60fa6ae6e6d0 ("ACPI: EC: Install address space handler at the namespace root")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218945
Reported-by: VitaliiT <vitaly.torshyn@gmail.com>
Tested-by: VitaliiT <vitaly.torshyn@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 856dd6c5981260b4d1aa84b78373ad54a203db48 upstream.
When CONFIG_QUOTA is disabled, there are warnings around unused iterator
variables:
fs/ext4/super.c: In function 'ext4_put_super':
fs/ext4/super.c:1262:13: error: unused variable 'i' [-Werror=unused-variable]
1262 | int i, err;
| ^
fs/ext4/super.c: In function '__ext4_fill_super':
fs/ext4/super.c:5200:22: error: unused variable 'i' [-Werror=unused-variable]
5200 | unsigned int i;
| ^
cc1: all warnings being treated as errors
The kernel has updated to GNU11, allowing the variables to be declared
within the for loop. Do so to clear up the warnings.
Fixes: dcbf87589d90 ("ext4: factor out ext4_flex_groups_free()")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20230420-ext4-unused-variables-super-c-v1-1-138b6db6c21c@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d5e72c4e3256335d6fb75c2e321144f93141f4f5 upstream.
When code was factored out of __ext4_fill_super() into
ext4_percpu_param_init() the error return was discarded. This meant
that it was possible for __ext4_fill_super() to return zero,
indicating success, without the struct super getting completely filled
in, leading to a potential NULL pointer dereference.
Reported-by: syzbot+bbf0f9a213c94f283a5c@syzkaller.appspotmail.com
Fixes: 1f79467c8a6b ("ext4: factor out ext4_percpu_param_init() ...")
Link: https://syzkaller.appspot.com/bug?id=6dac47d5e58af770c0055f680369586ec32e144c
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 81ea42b9c3d61ea34d82d900ed93f4b4851f13b0 upstream.
Commit 2b3f056f72e5 moved a blk_put_queue() call from
blk_mq_destroy_queue() into its callers. Reflect this change in the
documentation block above blk_mq_destroy_queue().
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Chaitanya Kulkarni <kch@nvidia.com>
Cc: Keith Busch <kbusch@kernel.org>
Fixes: 2b3f056f72e5 ("blk-mq: move the call to blk_put_queue out of blk_mq_destroy_queue")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230130211233.831613-1-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 47c03902269aff377f959dc3fd94a9733aa31d6e ]
eir_create_adv_data may attempt to add EIR_FLAGS and EIR_TX_POWER
without checking if that would fit.
Link: https://github.com/bluez/bluez/issues/1117#issuecomment-2958244066
Fixes: 01ce70b0a274 ("Bluetooth: eir: Move EIR/Adv Data functions to its own file")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
[ Use pdu.data instead of pdu->data in hci_set_ext_adv_data_sync()
to keep context consistency. ]
Signed-off-by: Robert Garcia <rob_garcia@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1777f349ff41b62dfe27454b69c27b0bc99ffca5 upstream.
This validates the previous commit: endpoints with both the signal and
subflow flags should always be marked as used even if it was not
possible to create new subflows due to the MPTCP PM limits.
For this test, an extra endpoint is created with both the signal and the
subflow flags, and limits are set not to create extra subflows. In this
case, an ADD_ADDR is sent, but no subflows are created. Still, the local
endpoint is marked as used, and no warning is fired when removing the
endpoint, after having sent a RM_ADDR.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 85df533a787b ("mptcp: pm: do not ignore 'subflow' if 'signal' flag is also set")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260303-net-mptcp-misc-fixes-7-0-rc2-v1-5-4b5462b6f016@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ No conflicts, but in this kernel version 'run_tests' doesn't support
parameters set via env vars: positional parameters need to be used.
See commit 595ef566a2ef ("selftests: mptcp: drop addr_nr_ns1/2
parameters") and commit e571fb09c893 ("selftests: mptcp: add speed env
var") which are not in this kernel version. ]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
With this kernel version, the 'implicit EP' MPTCP Join selftest ended
with an error message:
115 implicit EP creation[ ok ]
ID change is prevented[ ok ]
modif is allowed[ ok ]
TcpPassiveOpens 2 0.0
TcpEstabResets 2 0.0
TcpInSegs 315 0.0
TcpOutSegs 617 0.0
TcpOutRsts 1 0.0
TcpExtDelayedACKs 289 0.0
TcpExtTCPPureAcks 6 0.0
TcpExtTCPOrigDataSent 306 0.0
TcpExtTCPDelivered 306 0.0
MPTcpExtMPCapableSYNRX 1 0.0
MPTcpExtMPCapableACKRX 1 0.0
MPTcpExtMPJoinSynRx 1 0.0
MPTcpExtMPJoinAckRx 1 0.0
MPTcpExtAddAddr 1 0.0
MPTcpExtEchoAdd 1 0.0
MPTcpExtMPFastcloseTx 1 0.0
MPTcpExtMPRstTx 1 0.0
MPTcpExtMPRstRx 1 0.0
TcpActiveOpens 2 0.0
TcpEstabResets 2 0.0
TcpInSegs 617 0.0
TcpOutSegs 315 0.0
TcpOutRsts 1 0.0
TcpExtTCPPureAcks 308 0.0
TcpExtTCPOrigDataSent 306 0.0
TcpExtTCPDelivered 307 0.0
MPTcpExtMPCapableSYNTX 1 0.0
MPTcpExtMPCapableSYNACKRX 1 0.0
MPTcpExtMPJoinSynAckRx 1 0.0
MPTcpExtAddAddr 1 0.0
MPTcpExtEchoAdd 1 0.0
MPTcpExtMPFastcloseRx 1 0.0
MPTcpExtMPRstTx 1 0.0
MPTcpExtMPRstRx 1 0.0
MPTcpExtRcvWndShared 1 0.0
That's because the test was waiting for the end of the transfer for no
reasons, which ended after a timeout with an error. In this case, the
stats were displayed, but this error was ignored: the end of transfer is
not validated in this test.
To fix that, stop the transfer after the last check, similar to what is
done in the other tests.
Fixes: 699879d5f866 ("selftests: mptcp: join: endpoints: longer transfer")
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 28c4d9bc0708956c1a736a9e49fee71b65deee81 ]
In gdlm_put_lock(), there is a small window of time in which the
DFL_UNMOUNT flag has been set but the lockspace hasn't been released,
yet. In that window, dlm may still call gdlm_ast() and gdlm_bast().
To prevent it from dereferencing freed glock objects, only free the
glock if the lockspace has actually been released.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Andrew Price <anprice@redhat.com>
[ Minor context change fixed. ]
Signed-off-by: Robert Garcia <rob_garcia@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit e0d1c55501d377163eb57feed863777ed1c973ad ]
The blamed commit changed the conditions which phylib uses to stop
and start the state machine in the suspend and resume paths, and
while improving it, has caused two issues.
The original code used this test:
phydev->attached_dev && phydev->adjust_link
and if true, the paths would handle the PHY state machine. This test
evaluates true for normal drivers that are using phylib directly
while the PHY is attached to the network device, but false in all
other cases, which include the following cases:
- when the PHY has never been attached to a network device.
- when the PHY has been detached from a network device (as phy_detach()
sets phydev->attached_dev to NULL, phy_disconnect() calls
phy_detach() and additionally sets phydev->adjust_link NULL.)
- when phylink is using the driver (as phydev->adjust_link is NULL.)
Only the third case was incorrect, and the blamed commit attempted to
fix this by changing this test to (simplified for brevity, see
phy_uses_state_machine()):
phydev->phy_link_change == phy_link_change ?
phydev->attached_dev && phydev->adjust_link : true
However, this also incorrectly evaluates true in the first two cases.
Fix the first case by ensuring that phy_uses_state_machine() returns
false when phydev->phy_link_change is NULL.
Fix the second case by ensuring that phydev->phy_link_change is set to
NULL when phy_detach() is called.
Reported-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20250806082931.3289134-1-xu.yang_2@nxp.com
Fixes: fc75ea20ffb4 ("net: phy: allow MDIO bus PM ops to start/stop state machine for phylink-controlled PHY")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/E1uvMEz-00000003Aoe-3qWe@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Rajani Kantha <681739313@139.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
phylink-controlled PHY
[ Upstream commit fc75ea20ffb452652f0d4033f38fe88d7cfdae35 ]
DSA has 2 kinds of drivers:
1. Those who call dsa_switch_suspend() and dsa_switch_resume() from
their device PM ops: qca8k-8xxx, bcm_sf2, microchip ksz
2. Those who don't: all others. The above methods should be optional.
For type 1, dsa_switch_suspend() calls dsa_user_suspend() -> phylink_stop(),
and dsa_switch_resume() calls dsa_user_resume() -> phylink_start().
These seem good candidates for setting mac_managed_pm = true because
that is essentially its definition [1], but that does not seem to be the
biggest problem for now, and is not what this change focuses on.
Talking strictly about the 2nd category of DSA drivers here (which
do not have MAC managed PM, meaning that for their attached PHYs,
mdio_bus_phy_suspend() and mdio_bus_phy_resume() should run in full),
I have noticed that the following warning from mdio_bus_phy_resume() is
triggered:
WARN_ON(phydev->state != PHY_HALTED && phydev->state != PHY_READY &&
phydev->state != PHY_UP);
because the PHY state machine is running.
It's running as a result of a previous dsa_user_open() -> ... ->
phylink_start() -> phy_start() having been initiated by the user.
The previous mdio_bus_phy_suspend() was supposed to have called
phy_stop_machine(), but it didn't. So this is why the PHY is in state
PHY_NOLINK by the time mdio_bus_phy_resume() runs.
mdio_bus_phy_suspend() did not call phy_stop_machine() because for
phylink, the phydev->adjust_link function pointer is NULL. This seems a
technicality introduced by commit fddd91016d16 ("phylib: fix PAL state
machine restart on resume"). That commit was written before phylink
existed, and was intended to avoid crashing with consumer drivers which
don't use the PHY state machine - phylink always does, when using a PHY.
But phylink itself has historically not been developed with
suspend/resume in mind, and apparently not tested too much in that
scenario, allowing this bug to exist unnoticed for so long. Plus, prior
to the WARN_ON(), it would have likely been invisible.
This issue is not in fact restricted to type 2 DSA drivers (according to
the above ad-hoc classification), but can be extrapolated to any MAC
driver with phylink and MDIO-bus-managed PHY PM ops. DSA is just where
the issue was reported. Assuming mac_managed_pm is set correctly, a
quick search indicates the following other drivers might be affected:
$ grep -Zlr PHYLINK_NETDEV drivers/ | xargs -0 grep -L mac_managed_pm
drivers/net/ethernet/atheros/ag71xx.c
drivers/net/ethernet/microchip/sparx5/sparx5_main.c
drivers/net/ethernet/microchip/lan966x/lan966x_main.c
drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c
drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
drivers/net/ethernet/freescale/ucc_geth.c
drivers/net/ethernet/freescale/enetc/enetc_pf_common.c
drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
drivers/net/ethernet/marvell/mvneta.c
drivers/net/ethernet/marvell/prestera/prestera_main.c
drivers/net/ethernet/mediatek/mtk_eth_soc.c
drivers/net/ethernet/altera/altera_tse_main.c
drivers/net/ethernet/wangxun/txgbe/txgbe_phy.c
drivers/net/ethernet/meta/fbnic/fbnic_phylink.c
drivers/net/ethernet/tehuti/tn40_phy.c
drivers/net/ethernet/mscc/ocelot_net.c
Make the existing conditions dependent on the PHY device having a
phydev->phy_link_change() implementation equal to the default
phy_link_change() provided by phylib. Otherwise, we implicitly know that
the phydev has the phylink-provided phylink_phy_change() callback, and
when phylink is used, the PHY state machine always needs to be stopped/
started on the suspend/resume path. The code is structured as such that
if phydev->phy_link_change() is absent, it is a matter of time until the
kernel will crash - no need to further complicate the test.
Thus, for the situation where the PM is not managed by the MAC, we will
make the MDIO bus PM ops treat identically the phylink-controlled PHYs
with the phylib-controlled PHYs where an adjust_link() callback is
supplied. In both cases, the MDIO bus PM ops should stop and restart the
PHY state machine.
[1] https://lore.kernel.org/netdev/Z-1tiW9zjcoFkhwc@shell.armlinux.org.uk/
Fixes: 744d23c71af3 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state")
Reported-by: Wei Fang <wei.fang@nxp.com>
Tested-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250407094042.2155633-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Rajani Kantha <681739313@139.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit f40a673d6b4a128fe95dd9b8c3ed02da50a6a862 ]
In an upcoming change, mdio_bus_phy_may_suspend() will need to
distinguish a phylib-based PHY client from a phylink PHY client.
For that, it will need to compare the phydev->phy_link_change() function
pointer with the eponymous phy_link_change() provided by phylib.
To avoid forward function declarations, the default PHY link state
change method should be moved upwards. There is no functional change
associated with this patch, it is only to reduce the noise from a real
bug fix.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20250407093900.2155112-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Minor context change fixed ]
Signed-off-by: Rajani Kantha <681739313@139.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 394d70b86fae9fe865e7e6d9540b7696f73aa9b6 upstream.
In xfs_inode_item_push() and xfs_qm_dquot_logitem_push(), the AIL lock
is dropped to perform buffer IO. Once the cluster buffer no longer
protects the log item from reclaim, the log item may be freed by
background reclaim or the dquot shrinker. The subsequent spin_lock()
call dereferences lip->li_ailp, which is a use-after-free.
Fix this by saving the ailp pointer in a local variable while the AIL
lock is held and the log item is guaranteed to be valid.
Reported-by: syzbot+652af2b3c5569c4ab63c@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=652af2b3c5569c4ab63c
Fixes: 90c60e164012 ("xfs: xfs_iflush() is no longer necessary")
Cc: stable@vger.kernel.org # v5.9
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Yuto Ohnuki <ytohnuki@amazon.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 79ef34ec0554ec04bdbafafbc9836423734e1bd6 upstream.
After xfsaild_push_item() calls iop_push(), the log item may have been
freed if the AIL lock was dropped during the push. Background inode
reclaim or the dquot shrinker can free the log item while the AIL lock
is not held, and the tracepoints in the switch statement dereference
the log item after iop_push() returns.
Fix this by capturing the log item type, flags, and LSN before calling
xfsaild_push_item(), and introducing a new xfs_ail_push_class trace
event class that takes these pre-captured values and the ailp pointer
instead of the log item pointer.
Reported-by: syzbot+652af2b3c5569c4ab63c@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=652af2b3c5569c4ab63c
Fixes: 90c60e164012 ("xfs: xfs_iflush() is no longer necessary")
Cc: stable@vger.kernel.org # v5.9
Signed-off-by: Yuto Ohnuki <ytohnuki@amazon.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ce529cc25b184e93397b94a8a322128fc0095cbb upstream.
This was accidentally fixed in commit ce529cc25b18, but it's not possible
to accept all the changes, due to the lack of large folios support for
Linux 6.1 kernels, so this is only the actual bug fix that's needed.
[Background]
Syzbot reported that a KASAN slab-out-of-bounds bug was discovered in
the drop_buffers() function [1].
The root cause is that erofs_raw_access_aops does not define .release_folio
and .invalidate_folio. When using iomap-based operations, folio->private
may contain iomap-specific data rather than buffer_heads. Without special
handlers, the kernel may fall back to generic functions (such as
drop_buffers), which incorrectly treat folio->private as a list of
buffer_head structures, leading to incorrect memory interpretation and
out-of-bounds access.
Fix this by explicitly setting .release_folio and .invalidate_folio to the
values of iomap_release_folio and iomap_invalidate_folio, respectively.
[1] https://syzkaller.appspot.com/x/report.txt?x=12e5a142580000
Fixes: 7479c505b4ab ("fs: Convert iomap_readpage to iomap_read_folio")
Reported-by: syzbot+5b886a2e03529dbcef81@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?id=c6aeabd0c4ad2466f63a274faf2a123103f8fbf7
Signed-off-by: Denis Arefev <arefev@swemel.ru>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1a2180f6859c73c674809f9f82e36c94084682ba upstream.
Max Kellermann recently reported psi_group_cpu.tasks[NR_MEMSTALL] is
incorrect in the 6.11.9 kernel.
The root cause appears to be that, since the problematic commit, bio
can be NULL, causing psi_memstall_leave() to be skipped in
z_erofs_submit_queue().
Reported-by: Max Kellermann <max.kellermann@ionos.com>
Closes: https://lore.kernel.org/r/CAKPOu+8tvSowiJADW2RuKyofL_CSkm_SuyZA7ME5vMLWmL6pqw@mail.gmail.com
Fixes: 9e2f9d34dd12 ("erofs: handle overlapped pclusters out of crafted images properly")
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20241127085236.3538334-1-hsiangkao@linux.alibaba.com
Signed-off-by: Alexey Panov <apanov@astralinux.ru>
Link: https://lore.kernel.org/r/20250304110558.8315-3-apanov@astralinux.ru
Link: https://lore.kernel.org/r/20250304110558.8315-1-apanov@astralinux.ru
[ Gao Xiang: re-address the previous Alexey's backport. ]
CVE: CVE-2024-47736
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9e2f9d34dd12e6e5b244ec488bcebd0c2d566c50 upstream.
syzbot reported a task hang issue due to a deadlock case where it is
waiting for the folio lock of a cached folio that will be used for
cache I/Os.
After looking into the crafted fuzzed image, I found it's formed with
several overlapped big pclusters as below:
Ext: logical offset | length : physical offset | length
0: 0.. 16384 | 16384 : 151552.. 167936 | 16384
1: 16384.. 32768 | 16384 : 155648.. 172032 | 16384
2: 32768.. 49152 | 16384 : 537223168.. 537239552 | 16384
...
Here, extent 0/1 are physically overlapped although it's entirely
_impossible_ for normal filesystem images generated by mkfs.
First, managed folios containing compressed data will be marked as
up-to-date and then unlocked immediately (unlike in-place folios) when
compressed I/Os are complete. If physical blocks are not submitted in
the incremental order, there should be separate BIOs to avoid dependency
issues. However, the current code mis-arranges z_erofs_fill_bio_vec()
and BIO submission which causes unexpected BIO waits.
Second, managed folios will be connected to their own pclusters for
efficient inter-queries. However, this is somewhat hard to implement
easily if overlapped big pclusters exist. Again, these only appear in
fuzzed images so let's simply fall back to temporary short-lived pages
for correctness.
Additionally, it justifies that referenced managed folios cannot be
truncated for now and reverts part of commit 2080ca1ed3e4 ("erofs: tidy
up `struct z_erofs_bvec`") for simplicity although it shouldn't be any
difference.
[Alexey: This patch follows linux 6.6.y conflict resolution changes of
struct folio -> struct page]
Reported-by: syzbot+4fc98ed414ae63d1ada2@syzkaller.appspotmail.com
Reported-by: syzbot+de04e06b28cfecf2281c@syzkaller.appspotmail.com
Reported-by: syzbot+c8c8238b394be4a1087d@syzkaller.appspotmail.com
Tested-by: syzbot+4fc98ed414ae63d1ada2@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/r/0000000000002fda01061e334873@google.com
Fixes: 8e6c8fa9f2e9 ("erofs: enable big pcluster feature")
Link: https://lore.kernel.org/r/20240910070847.3356592-1-hsiangkao@linux.alibaba.com
Signed-off-by: Alexey Panov <apanov@astralinux.ru>
Link: https://lore.kernel.org/r/20250304110558.8315-2-apanov@astralinux.ru
Link: https://lore.kernel.org/r/20250304110558.8315-1-apanov@astralinux.ru
[ Gao Xiang: re-address the previous Alexey's backport. ]
CVE: CVE-2024-47736
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 17926cd770ec837ed27d9856cf07f2da8dda4131 ]
On Octal DTR capable flashes like Micron Xcella the writes cannot start
or end at an odd address in Octal DTR mode. Extra 0xff bytes need to be
appended or prepended to make sure the start address and end address are
even. 0xff is used because on NOR flashes a program operation can only
flip bits from 1 to 0, not the other way round. 0 to 1 flip needs to
happen via erases.
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Signed-off-by: Luke Wang <ziniu.wang_1@nxp.com>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
Link: https://lore.kernel.org/r/20250708091646.292-2-ziniu.wang_1@nxp.com
[ Resolve conflict in drivers/mtd/spi-nor/core.c.
In spi_nor_write(), the spi_nor_lock_device() and
spi_nor_unlock_device() mechanism was not yet introduced in 6.1.y.
Drop the spi_nor_unlock_device() call from the patch. ]
Signed-off-by: Liyin Zhang <liyin.zhang.cn@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit f156b23df6a84efb2f6686156be94d4988568954 ]
On Octal DTR capable flashes like Micron Xcella reads cannot start or
end at an odd address in Octal DTR mode. Extra bytes need to be read at
the start or end to make sure both the start address and length remain
even.
To avoid allocating too much extra memory, thereby putting unnecessary
memory pressure on the system, the temporary buffer containing the extra
padding bytes is capped at PAGE_SIZE bytes. The rest of the 2-byte
aligned part should be read directly in the main buffer.
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Signed-off-by: Luke Wang <ziniu.wang_1@nxp.com>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
Link: https://lore.kernel.org/r/20250708091646.292-1-ziniu.wang_1@nxp.com
[ Resolve conflict in drivers/mtd/spi-nor/core.c.
In spi_nor_read(), 6.1.y contains a spi_nor_convert_addr() call
before spi_nor_read_data(), introduced by 364995962803 ("mtd:
spi-nor: Add a ->convert_addr() method"), which does not exist in
mainline. This call is specific to Xilinx S3AN flashes, which use a
non-standard address format. In mainline, S3AN flash support was
removed entirely, and the corresponding spi_nor_convert_addr() call
was dropped by 9539d12d9f52 ("mtd: spi-nor: get rid of non-power-of-2
page size handling"). Keep the existing spi_nor_convert_addr() call
and insert the new spi_nor_octal_dtr_read() branch after it. ]
Signed-off-by: Liyin Zhang <liyin.zhang.cn@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 6dcf9d0064ce2f3e3dfe5755f98b93abe6a98e1e ]
When kobject_init_and_add() fails, cpufreq_dbs_governor_init() calls
kobject_put(&dbs_data->attr_set.kobj).
The kobject release callback cpufreq_dbs_data_release() calls
gov->exit(dbs_data) and kfree(dbs_data), but the current error path
then calls gov->exit(dbs_data) and kfree(dbs_data) again, causing a
double free.
Keep the direct kfree(dbs_data) for the gov->init() failure path, but
after kobject_init_and_add() has been called, let kobject_put() handle
the cleanup through cpufreq_dbs_data_release().
Fixes: 4ebe36c94aed ("cpufreq: Fix kobject memleak")
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Reviewed-by: Zhongqiu Han <zhongqiu.han@oss.qualcomm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: All applicable <stable@vger.kernel.org>
Link: https://patch.msgid.link/20260401024535.1395801-1-lgs201920130244@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 916f13884042f615cfbfc0b42cc68dadee826f2a ]
Due to the kobject embedded in the dbs_data doest not has a release()
method yet, it needs to use kfree() to free dbs_data directly when
governor fails to allocate the tunner field of dbs_data.
Signed-off-by: Liao Chang <liaochang1@huawei.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: 6dcf9d0064ce ("cpufreq: governor: fix double free in cpufreq_dbs_governor_init() error path")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit bb81702370fad22c06ca12b6e1648754dbc37e0f ]
Commit 4865c768b563 ("ext4: always allocate blocks only from groups
inode can use") restricts what blocks will be allocated for indirect
block based files to block numbers that fit within 32-bit block
numbers.
However, when using a review bot running on the latest Gemini LLM to
check this commit when backporting into an LTS based kernel, it raised
this concern:
If ac->ac_g_ex.fe_group is >= ngroups (for instance, if the goal
group was populated via stream allocation from s_mb_last_groups),
then start will be >= ngroups.
Does this allow allocating blocks beyond the 32-bit limit for
indirect block mapped files? The commit message mentions that
ext4_mb_scan_groups_linear() takes care to not select unsupported
groups. However, its loop uses group = *start, and the very first
iteration will call ext4_mb_scan_group() with this unsupported
group because next_linear_group() is only called at the end of the
iteration.
After reviewing the code paths involved and considering the LLM
review, I determined that this can happen when there is a file system
where some files/directories are extent-mapped and others are
indirect-block mapped. To address this, add a safety clamp in
ext4_mb_scan_groups().
Fixes: 4865c768b563 ("ext4: always allocate blocks only from groups inode can use")
Cc: Jan Kara <jack@suse.cz>
Reviewed-by: Baokun Li <libaokun@linux.alibaba.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://patch.msgid.link/20260326045834.1175822-1-tytso@mit.edu
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
[ adapted fix from ext4_mb_scan_groups() to inline equivalent in ext4_mb_regular_allocator() ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7ab4a7c5d969642782b8a5b608da0dd02aa9f229 upstream.
In mptcp_pm_nl_create_listen_socket(), use entry->addr.family
instead of sk->sk_family for lock class setup. The 'sk' parameter
is a netlink socket, not the MPTCP subflow socket being created.
Fixes: cee4034a3db1 ("mptcp: fix lockdep false positive in mptcp_pm_nl_create_listen_socket()")
Signed-off-by: Li Xiasong <lixiasong1@huawei.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260319112159.3118874-1-lixiasong1@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Conflict in pm_kernel.c, because commit 8617e85e04bd ("mptcp: pm:
split in-kernel PM specific code") is not in this version, and moves
code from pm_netlink.c to pm_kernel.c. ]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 1aec30021edd410b986c156f195f3d23959a9d11 ]
ext4_inode_attach_jinode() publishes ei->jinode to concurrent users.
It used to set ei->jinode before jbd2_journal_init_jbd_inode(),
allowing a reader to observe a non-NULL jinode with i_vfs_inode
still unset.
The fast commit flush path can then pass this jinode to
jbd2_wait_inode_data(), which dereferences i_vfs_inode->i_mapping and
may crash.
Below is the crash I observe:
```
BUG: unable to handle page fault for address: 000000010beb47f4
PGD 110e51067 P4D 110e51067 PUD 0
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 1 UID: 0 PID: 4850 Comm: fc_fsync_bench_ Not tainted 6.18.0-00764-g795a690c06a5 #1 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.17.0-2-2 04/01/2014
RIP: 0010:xas_find_marked+0x3d/0x2e0
Code: e0 03 48 83 f8 02 0f 84 f0 01 00 00 48 8b 47 08 48 89 c3 48 39 c6 0f 82 fd 01 00 00 48 85 c9 74 3d 48 83 f9 03 77 63 4c 8b 0f <49> 8b 71 08 48 c7 47 18 00 00 00 00 48 89 f1 83 e1 03 48 83 f9 02
RSP: 0018:ffffbbee806e7bf0 EFLAGS: 00010246
RAX: 000000000010beb4 RBX: 000000000010beb4 RCX: 0000000000000003
RDX: 0000000000000001 RSI: 0000002000300000 RDI: ffffbbee806e7c10
RBP: 0000000000000001 R08: 0000002000300000 R09: 000000010beb47ec
R10: ffff9ea494590090 R11: 0000000000000000 R12: 0000002000300000
R13: ffffbbee806e7c90 R14: ffff9ea494513788 R15: ffffbbee806e7c88
FS: 00007fc2f9e3e6c0(0000) GS:ffff9ea6b1444000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000010beb47f4 CR3: 0000000119ac5000 CR4: 0000000000750ef0
PKRU: 55555554
Call Trace:
<TASK>
filemap_get_folios_tag+0x87/0x2a0
__filemap_fdatawait_range+0x5f/0xd0
? srso_alias_return_thunk+0x5/0xfbef5
? __schedule+0x3e7/0x10c0
? srso_alias_return_thunk+0x5/0xfbef5
? srso_alias_return_thunk+0x5/0xfbef5
? srso_alias_return_thunk+0x5/0xfbef5
? preempt_count_sub+0x5f/0x80
? srso_alias_return_thunk+0x5/0xfbef5
? cap_safe_nice+0x37/0x70
? srso_alias_return_thunk+0x5/0xfbef5
? preempt_count_sub+0x5f/0x80
? srso_alias_return_thunk+0x5/0xfbef5
filemap_fdatawait_range_keep_errors+0x12/0x40
ext4_fc_commit+0x697/0x8b0
? ext4_file_write_iter+0x64b/0x950
? srso_alias_return_thunk+0x5/0xfbef5
? preempt_count_sub+0x5f/0x80
? srso_alias_return_thunk+0x5/0xfbef5
? vfs_write+0x356/0x480
? srso_alias_return_thunk+0x5/0xfbef5
? preempt_count_sub+0x5f/0x80
ext4_sync_file+0xf7/0x370
do_fsync+0x3b/0x80
? syscall_trace_enter+0x108/0x1d0
__x64_sys_fdatasync+0x16/0x20
do_syscall_64+0x62/0x2c0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
...
```
Fix this by initializing the jbd2_inode first.
Use smp_wmb() and WRITE_ONCE() to publish ei->jinode after
initialization. Readers use READ_ONCE() to fetch the pointer.
Fixes: a361293f5fede ("jbd2: Fix oops in jbd2_journal_file_inode()")
Cc: stable@vger.kernel.org
Signed-off-by: Li Chen <me@linux.beauty>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20260225082617.147957-1-me@linux.beauty
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
[ adapted READ_ONCE(jinode) wrapping to split ext4_fc_submit_inode_data_all() and ext4_fc_wait_inode_data_all() ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 496bb99b7e66f48b178126626f47e9ba79e2d0fa ]
Use the kvfree() in the RCU read critical section can trigger
the following warnings:
EXT4-fs (vdb): unmounting filesystem cd983e5b-3c83-4f5a-a136-17b00eb9d018.
WARNING: suspicious RCU usage
./include/linux/rcupdate.h:409 Illegal context switch in RCU read-side critical section!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
Call Trace:
<TASK>
dump_stack_lvl+0xbb/0xd0
dump_stack+0x14/0x20
lockdep_rcu_suspicious+0x15a/0x1b0
__might_resched+0x375/0x4d0
? put_object.part.0+0x2c/0x50
__might_sleep+0x108/0x160
vfree+0x58/0x910
? ext4_group_desc_free+0x27/0x270
kvfree+0x23/0x40
ext4_group_desc_free+0x111/0x270
ext4_put_super+0x3c8/0xd40
generic_shutdown_super+0x14c/0x4a0
? __pfx_shrinker_free+0x10/0x10
kill_block_super+0x40/0x90
ext4_kill_sb+0x6d/0xb0
deactivate_locked_super+0xb4/0x180
deactivate_super+0x7e/0xa0
cleanup_mnt+0x296/0x3e0
__cleanup_mnt+0x16/0x20
task_work_run+0x157/0x250
? __pfx_task_work_run+0x10/0x10
? exit_to_user_mode_loop+0x6a/0x550
exit_to_user_mode_loop+0x102/0x550
do_syscall_64+0x44a/0x500
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
BUG: sleeping function called from invalid context at mm/vmalloc.c:3441
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 556, name: umount
preempt_count: 1, expected: 0
CPU: 3 UID: 0 PID: 556 Comm: umount
Call Trace:
<TASK>
dump_stack_lvl+0xbb/0xd0
dump_stack+0x14/0x20
__might_resched+0x275/0x4d0
? put_object.part.0+0x2c/0x50
__might_sleep+0x108/0x160
vfree+0x58/0x910
? ext4_group_desc_free+0x27/0x270
kvfree+0x23/0x40
ext4_group_desc_free+0x111/0x270
ext4_put_super+0x3c8/0xd40
generic_shutdown_super+0x14c/0x4a0
? __pfx_shrinker_free+0x10/0x10
kill_block_super+0x40/0x90
ext4_kill_sb+0x6d/0xb0
deactivate_locked_super+0xb4/0x180
deactivate_super+0x7e/0xa0
cleanup_mnt+0x296/0x3e0
__cleanup_mnt+0x16/0x20
task_work_run+0x157/0x250
? __pfx_task_work_run+0x10/0x10
? exit_to_user_mode_loop+0x6a/0x550
exit_to_user_mode_loop+0x102/0x550
do_syscall_64+0x44a/0x500
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The above scenarios occur in initialization failures and teardown
paths, there are no parallel operations on the resources released
by kvfree(), this commit therefore remove rcu_read_lock/unlock() and
use rcu_access_pointer() instead of rcu_dereference() operations.
Fixes: 7c990728b99e ("ext4: fix potential race between s_flex_groups online resizing and access")
Fixes: df3da4ea5a0f ("ext4: fix potential race between s_group_info online resizing and access")
Signed-off-by: Zqiang <qiang.zhang@linux.dev>
Reviewed-by: Baokun Li <libaokun@linux.alibaba.com>
Link: https://patch.msgid.link/20260319094545.19291-1-qiang.zhang@linux.dev
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit dcbf87589d90e3bd5a5a4cf832517f22f3c55efb ]
Factor out ext4_flex_groups_free() and it can be used both in
__ext4_fill_super() and ext4_put_super().
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20230323140517.1070239-5-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: 496bb99b7e66 ("ext4: fix the might_sleep() warnings in kvfree()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
code
[ Upstream commit 6ef684988816fdfa29ceff260c97d725a489a942 ]
The only difference here is that ->s_group_desc and ->s_flex_groups share
the same rcu read lock here but it is not necessary. In other places they
do not share the lock at all.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20230323140517.1070239-4-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: 496bb99b7e66 ("ext4: fix the might_sleep() warnings in kvfree()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 1f79467c8a6be64940a699de1bd43338a6dd9fdd ]
Factor out ext4_percpu_param_init() and ext4_percpu_param_destroy(). And
also use ext4_percpu_param_destroy() in ext4_put_super() to avoid
duplicated code. No functional change.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20230323140517.1070239-3-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: 496bb99b7e66 ("ext4: fix the might_sleep() warnings in kvfree()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 3075a3951f7708da5a8ab47b0b7d068a32f69e58 ]
The custom avs0_enable and avs1_enable sysfs attributes access PMBus
registers through the exported API helpers (pmbus_read_byte_data,
pmbus_read_word_data, pmbus_write_word_data, pmbus_update_byte_data)
without holding the PMBus update_lock mutex. These exported helpers do
not acquire the mutex internally, unlike the core's internal callers
which hold the lock before invoking them.
The store callback is especially vulnerable: it performs a multi-step
read-modify-write sequence (read VOUT_COMMAND, write VOUT_COMMAND, then
update OPERATION) where concurrent access from another thread could
interleave and corrupt the register state.
Add pmbus_lock_interruptible()/pmbus_unlock() around both the show and
store callbacks to serialize PMBus register access with the rest of the
driver.
Fixes: 038a9c3d1e424 ("hwmon: (pmbus/isl68137) Add driver for Intersil ISL68137 PWM Controller")
Cc: stable@vger.kernel.org
Signed-off-by: Sanman Pradhan <psanman@juniper.net>
Link: https://lore.kernel.org/r/20260319173055.125271-3-sanman.pradhan@hpe.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit a7ac37183ac2a0cc46d857997b2dd24997ca2754 ]
Debugfs operations may set the page number, which must be done
atomically with the subsequent i2c operation. Lock the update_lock
in the debugfs functions and provide a function for pmbus drivers
to lock and unlock the update_lock.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20230412161526.252294-2-eajames@linux.ibm.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Stable-dep-of: 3075a3951f77 ("hwmon: (pmbus/isl68137) Add mutex protection for AVS enable sysfs attributes")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 1f9885732248d22f788e4992c739a98c88ab8a55 ]
The following sequence may leads deadlock in cpu hotplug:
task1 task2 task3
----- ----- -----
mutex_lock(&interface_lock)
[CPU GOING OFFLINE]
cpus_write_lock();
osnoise_cpu_die();
kthread_stop(task3);
wait_for_completion();
osnoise_sleep();
mutex_lock(&interface_lock);
cpus_read_lock();
[DEAD LOCK]
Fix by swap the order of cpus_read_lock() and mutex_lock(&interface_lock).
Cc: stable@vger.kernel.org
Cc: <mathieu.desnoyers@efficios.com>
Cc: <zhang.run@zte.com.cn>
Cc: <yang.tao172@zte.com.cn>
Cc: <ran.xiaokai@zte.com.cn>
Fixes: bce29ac9ce0bb ("trace: Add osnoise tracer")
Link: https://patch.msgid.link/20260326141953414bVSj33dAYktqp9Oiyizq8@zte.com.cn
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Luo Haiyang <luo.haiyang@zte.com.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
[ adapted guard() macros to lock/unlock calls ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit beef2634f81f1c086208191f7228bce1d366493d ]
When a compound request consists of QUERY_DIRECTORY + QUERY_INFO
(FILE_ALL_INFORMATION) and the first command consumes nearly the entire
max_trans_size, get_file_all_info() would blindly call smbConvertToUTF16()
with PATH_MAX, causing out-of-bounds write beyond the response buffer.
In get_file_all_info(), there was a missing validation check for
the client-provided OutputBufferLength before copying the filename into
FileName field of the smb2_file_all_info structure.
If the filename length exceeds the available buffer space, it could lead to
potential buffer overflows or memory corruption during smbConvertToUTF16
conversion. This calculating the actual free buffer size using
smb2_calc_max_out_buf_len() and returning -EINVAL if the buffer is
insufficient and updating smbConvertToUTF16 to use the actual filename
length (clamped by PATH_MAX) to ensure a safe copy operation.
Cc: stable@vger.kernel.org
Fixes: e2b76ab8b5c9 ("ksmbd: add support for read compound")
Reported-by: Asim Viladi Oglu Manizada <manizada@pm.me>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
[ adapted variable declarations ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 309b44ed684496ed3f9c5715d1 |
