| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Making 'blk' sector_t (i.e. 64 bit if LBD support is active) fails the
'blk>0' test in the partition block loop if a value of (signed int) -1 is
used to mark the end of the partition block list.
Explicitly cast 'blk' to signed int to allow use of -1 to terminate the
partition block linked list.
Fixes: b6f3f28f604b ("block: add overflow checks for Amiga partition support")
Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Link: https://lore.kernel.org/r/024ce4fa-cc6d-50a2-9aae-3701d0ebf668@xenosoft.de
Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Reviewed-by: Martin Steigerwald <martin@lichtvoll.de>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
I added a warning about about GUP no longer expanding the stack in
commit a425ac5365f6 ("gup: add warning if some caller would seem to want
stack expansion"), but didn't really expect anybody to hit it.
And it's true that nobody seems to have hit a _real_ case yet, but we
certainly have a number of reports of false positives. Which not only
causes extra noise in itself, but might also end up hiding any real
cases if they do exist.
So let's tighten up the warning condition, and replace the simplistic
vma = find_vma(mm, start);
if (vma && (start < vma->vm_start)) {
WARN_ON_ONCE(vma->vm_flags & VM_GROWSDOWN);
with a
vma = gup_vma_lookup(mm, start);
helper function which works otherwise like just "vma_lookup()", but with
some heuristics for when to warn about gup no longer causing stack
expansion.
In particular, don't just warn for "below the stack", but warn if it's
_just_ below the stack (with "just below" arbitrarily defined as 64kB,
because why not?). And rate-limit it to at most once per hour, which
means that any false positives shouldn't completely hide subsequent
reports, but we won't be flooding the logs about it either.
The previous code triggered when some GUP user (chromium crashpad)
accessing past the end of the previous vma, for example. That has never
expanded the stack, it just causes GUP to return early, and as such we
shouldn't be warning about it.
This is still going trigger the randomized testers, but to mitigate the
noise from that, use "dump_stack()" instead of "WARN_ON_ONCE()" to get
the kernel call chain. We'll get the relevant information, but syzbot
shouldn't get too upset about it.
Also, don't even bother with the GROWSUP case, which would be using
different heuristics entirely, but only happens on parisc.
Reported-by: kernel test robot <oliver.sang@intel.com>
Reported-by: John Hubbard <jhubbard@nvidia.com>
Reported-by: syzbot+6cf44e127903fdf9d929@syzkaller.appspotmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This reverts commit 534066a983df0935847061c844eb178f8a53a9e7.
It's actively detrimental in that it hides files that shouldn't be
hidden.
If I have some b4 mbx file in my git directory, it either was already
applied with "git am" and is now stale, or maybe it's waiting for that
to happen. In neither case is "ignore it" the right option.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/peterz/queue
Pull scope-based resource management infrastructure from Peter Zijlstra:
"These are the first few patches in the Scope-based Resource Management
series that introduce the infrastructure but not any conversions as of
yet.
Adding the infrastructure now allows multiple people to start using
them.
Of note is that Sparse will need some work since it doesn't yet
understand this attribute and might have decl-after-stmt issues"
* tag 'core_guards_for_6.5_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/peterz/queue:
kbuild: Drop -Wdeclaration-after-statement
locking: Introduce __cleanup() based infrastructure
apparmor: Free up __cleanup() name
dmaengine: ioat: Free up __cleanup() name
|
|
When an AFS FS.StoreData RPC call is made, amongst other things it is
given the resultant file size to be. On the server, this is processed
by truncating the file to new size and then writing the data.
Now, kafs has a lock (vnode->io_lock) that serves to serialise
operations against a specific vnode (ie. inode), but the parameters for
the op are set before the lock is taken. This allows two writebacks
(say sync and kswapd) to race - and if writes are ongoing the writeback
for a later write could occur before the writeback for an earlier one if
the latter gets interrupted.
Note that afs_writepages() cannot take i_mutex and only takes a shared
lock on vnode->validate_lock.
Also note that the server does the truncation and the write inside a
lock, so there's no problem at that end.
Fix this by moving the calculation for the proposed new i_size inside
the vnode->io_lock. Also reset the iterator (which we might have read
from) and update the mtime setting there.
Fixes: bd80d8a80e12 ("afs: Use ITER_XARRAY for writing")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/3526895.1687960024@warthog.procyon.org.uk/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs
Pull more overlayfs updates from Amir Goldstein:
"This is a small 'move code around' followup by Christian to his work
on porting overlayfs to the new mount api for 6.5. It makes things a
bit cleaner and simpler for the next development cycle when I hand
overlayfs back over to Miklos"
* tag 'ovl-update-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs:
ovl: move all parameter handling into params.{c,h}
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 updates from Andreas Gruenbacher:
- Move the freeze/thaw logic from glock callback context to process /
worker thread context to prevent deadlocks
- Fix a quota reference couting bug in do_qc()
- Carry on deallocating inodes even when gfs2_rindex_update() fails
- Retry filesystem-internal reads when they are interruped by a signal
- Eliminate kmap_atomic() in favor of kmap_local_page() /
memcpy_{from,to}_page()
- Get rid of noop_direct_IO
- And a few more minor fixes and cleanups
* tag 'gfs2-v6.4-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: (23 commits)
gfs2: Add quota_change type
gfs2: Use memcpy_{from,to}_page where appropriate
gfs2: Convert remaining kmap_atomic calls to kmap_local_page
gfs2: Replace deprecated kmap_atomic with kmap_local_page
gfs: Get rid of unnucessary locking in inode_go_dump
gfs2: gfs2_freeze_lock_shared cleanup
gfs2: Replace sd_freeze_state with SDF_FROZEN flag
gfs2: Rework freeze / thaw logic
gfs2: Rename SDF_{FS_FROZEN => FREEZE_INITIATOR}
gfs2: Reconfiguring frozen filesystem already rejected
gfs2: Rename gfs2_freeze_lock{ => _shared }
gfs2: Rename the {freeze,thaw}_super callbacks
gfs2: Rename remaining "transaction" glock references
gfs2: retry interrupted internal reads
gfs2: Fix possible data races in gfs2_show_options()
gfs2: Fix duplicate should_fault_in_pages() call
gfs2: set FMODE_CAN_ODIRECT instead of a dummy direct_IO method
gfs2: Don't remember delete unless it's successful
gfs2: Update rl_unlinked before releasing rgrp lock
gfs2: Fix gfs2_qa_get imbalance in gfs2_quota_hold
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These add support for new hardware (ap807 and AM62A7), fix several
issues in cpufreq drivers and in the operating performance points
(OPP) framework, fix up intel_idle after recent changes and add
documentation.
Specifics:
- Add missing __init annotation to one function in the intel_idle
drvier (Rafael Wysocki)
- Make intel_pstate use a correct scaling factor when mapping HWP
performance levels to frequency values on hybrid-capable systems
with disabled E-cores (Srinivas Pandruvada)
- Fix Kconfig dependencies of the cpufreq-dt-platform driver (Viresh
Kumar)
- Add support to build cpufreq-dt-platdev as a module (Zhipeng Wang)
- Don't allocate Sparc's cpufreq_driver dynamically (Viresh Kumar)
- Add support for TI's AM62A7 platform (Vibhore Vardhan)
- Add support for Armada's ap807 platform (Russell King (Oracle))
- Add support for StarFive JH7110 SoC (Mason Huo)
- Fix voltage selection for Mediatek Socs (Daniel Golle)
- Fix error handling in Tegra's cpufreq driver (Christophe JAILLET)
- Document Qualcomm's IPQ8074 in DT bindings (Robert Marko)
- Don't warn for disabling a non-existing frequency for imx6q cpufreq
driver (Christoph Niedermaier)
- Use dev_err_probe() in Qualcomm's cpufreq driver (Andrew Halaney)
- Simplify performance state related logic in the OPP core (Viresh
Kumar)
- Fix use-after-free and improve locking around lazy_opp_tables
(Viresh Kumar, Stephan Gerhold)
- Minor cleanups - using dev_err_probe() and rate-limiting debug
messages (Andrew Halaney, Adrián Larumbe)"
* tag 'pm-6.5-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (23 commits)
cpufreq: intel_pstate: Fix scaling for hybrid-capable systems with disabled E-cores
cpufreq: Make CONFIG_CPUFREQ_DT_PLATDEV depend on OF
intel_idle: Add __init annotation to matchup_vm_state_with_baremetal()
OPP: Properly propagate error along when failing to get icc_path
OPP: Use dev_err_probe() when failing to get icc_path
cpufreq: qcom-cpufreq-hw: Use dev_err_probe() when failing to get icc paths
cpufreq: mediatek: correct voltages for MT7622 and MT7623
cpufreq: armada-8k: add ap807 support
OPP: Simplify the over-designed pstate <-> level dance
OPP: pstate is only valid for genpd OPP tables
OPP: don't drop performance constraint on OPP table removal
OPP: Protect `lazy_opp_tables` list with `opp_table_lock`
OPP: Staticize `lazy_opp_tables` in of.c
cpufreq: dt-platdev: Support building as module
opp: Fix use-after-free in lazy_opp_tables after probe deferral
dt-bindings: cpufreq: qcom-cpufreq-nvmem: document IPQ8074
cpufreq: dt-platdev: Blacklist ti,am62a7 SoC
cpufreq: ti-cpufreq: Add support for AM62A7
OPP: rate-limit debug messages when no change in OPP is required
cpufreq: imx6q: don't warn for disabling a non-existing frequency
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull more clk updates from Stephen Boyd:
"Another set of clk driver updates and fixes for the merge window. The
driver updates needed more time to bake in linux-next.
Updates:
- Support for more clk controllers in Qualcomm SoCs such as SM8350,
SM8450, SDX75, SC8280XP, and IPQ9574
- Runtime PM enablement of some more Qualcomm clk controllers
- Various fixes to Qualcomm clk driver data to use correct clk_ops
and to check halt bits properly
- AT91 updates to modernize with clk_parent_data structures
Fixes:
- Remove 'syscon' from dt binding fix for ti,j721e-system-controller
- Fix determine rate in the Tegra driver that got wrecked by the
refactorting of muxes this merge window"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (69 commits)
clk: tegra: Avoid calling an uninitialized function
dt-bindings: mfd: ti,j721e-system-controller: Remove syscon from example
clk: at91: sama7g5: s/ep_chg_chg_id/ep_chg_id
clk: at91: sama7g5: switch to parent_hw and parent_data
clk: at91: sckc: switch to parent_data/parent_hw
clk: at91: clk-sam9x60-pll: add support for parent_hw
clk: at91: clk-utmi: add support for parent_hw
clk: at91: clk-system: add support for parent_hw
clk: at91: clk-programmable: add support for parent_hw
clk: at91: clk-peripheral: add support for parent_hw
clk: at91: clk-master: add support for parent_hw
clk: at91: clk-generated: add support for parent_hw
clk: at91: clk-main: add support for parent_data/parent_hw
clk: qcom: gcc-sc8280xp: Add runtime PM
clk: qcom: gpucc-sc8280xp: Add runtime PM
clk: qcom: mmcc-msm8974: fix MDSS_GDSC power flags
clk: qcom: gpucc-sm6375: Enable runtime pm
dt-bindings: clock: sm6375-gpucc: Add VDD_GX
clk: qcom: gcc-sm6115: Add missing PLL config properties
clk: qcom: clk-alpha-pll: Add a way to update some bits of test_ctl(_hi)
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire updates from Takashi Sakamoto:
"This consist of three parts; UAPI update, OHCI driver update, and
several bug fixes.
Firstly, the 1394 OHCI specification defines method to retrieve
hardware time stamps for asynchronous communication, which was
previously unavailable in user space. This adds new events to the
UAPI, allowing applications to retrieve the time when asynchronous
packet are received and sent. The new events are tested in the
bleeding edge of libhinawa and look to work well. The new version of
libhinawa will be released after current merge window is closed:
https://git.kernel.org/pub/scm/libs/ieee1394/libhinawa.git/
Secondly, the FireWire stack includes a PCM device driver for 1394
OHCI hardware, This change modernizes the driver by managed resource
(devres) framework.
Lastly, bug fixes for firewire-net and firewire-core"
* tag 'firewire-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: (25 commits)
firewire: net: fix use after free in fwnet_finish_incoming_packet()
firewire: core: obsolete usage of GFP_ATOMIC at building node tree
firewire: ohci: release buffer for AR req/resp contexts when managed resource is released
firewire: ohci: use devres for content of configuration ROM
firewire: ohci: use devres for IT, IR, AT/receive, and AT/request contexts
firewire: ohci: use devres for list of isochronous contexts
firewire: ohci: use devres for requested IRQ
firewire: ohci: use devres for misc DMA buffer
firewire: ohci: use devres for MMIO region mapping
firewire: ohci: use devres for PCI-related resources
firewire: ohci: use devres for memory object of ohci structure
firewire: fix warnings to generate UAPI documentation
firewire: fix build failure due to missing module license
firewire: cdev: implement new event relevant to phy packet with time stamp
firewire: cdev: add new event to notify phy packet with time stamp
firewire: cdev: code refactoring to dispatch event for phy packet
firewire: cdev: implement new event to notify response subaction with time stamp
firewire: cdev: add new event to notify response subaction with time stamp
firewire: cdev: code refactoring to operate event of response
firewire: core: implement variations to send request and wait for response with time stamp
...
|
|
Vegard Nossum pointed out two different problems with the error handling
in init_module_from_file():
(a) the idempotent loading code didn't clean up properly in some error
cases, leaving the on-stack 'struct idempotent' element still in
the hash table
(b) failure to read the module file would nonsensically update the
'invalid_kread_bytes' stat counter with the error value
The first error is quite nasty, in that it can then cause subsequent
idempotent loads of that same file to access stale stack contents of the
previous failure. The case may not happen in any normal situation
(explaining all the "Tested-by's on the original change), and requires
admin privileges, but syzkaller triggers random bad behavior as a
result:
BUG: soft lockup in sys_finit_module
BUG: unable to handle kernel paging request in init_module_from_file
general protection fault in init_module_from_file
INFO: task hung in init_module_from_file
KASAN: out-of-bounds Read in init_module_from_file
KASAN: slab-out-of-bounds Read in init_module_from_file
...
The second error is fairly benign and just leads to nonsensical stats
(and has been around since the debug stats were added).
Vegard also provided a patch for the idempotent loading issue, but I'd
rather re-organize the code and make it more legible using another level
of helper functions than add the usual "goto out" error handling.
Link: https://lore.kernel.org/lkml/20230704100852.23452-1-vegard.nossum@oracle.com/
Fixes: 9b9879fc0327 ("modules: catch concurrent module loads, treat them as idempotent")
Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Reported-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reported-by: syzbot+9c2bdc9d24e4a7abe741@syzkaller.appspotmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Merge CPU power management updates for 6.5-rc1:
- Add missing __init annotation to one function in the intel_idle
drvier (Rafael Wysocki).
- Make intel_pstate use a correct scaling factor when mapping HWP
performance levels to frequency values on hybrid-capable systems
with disabled E-cores (Srinivas Pandruvada).
- Fix Kconfig dependencies of the cpufreq-dt-platform driver (Viresh
Kumar).
- Add support to build cpufreq-dt-platdev as a module (Zhipeng Wang).
- Don't allocate Sparc's cpufreq_driver dynamically (Viresh Kumar).
- Add support for TI's AM62A7 platform (Vibhore Vardhan).
- Add support for Armada's ap807 platform (Russell King (Oracle)).
- Add support for StarFive JH7110 SoC (Mason Huo).
- Fix voltage selection for Mediatek Socs (Daniel Golle).
- Fix error handling in Tegra's cpufreq driver (Christophe JAILLET).
- Document Qualcomm's IPQ8074 in DT bindings (Robert Marko).
- Don't warn for disabling a non-existing frequency for imx6q cpufreq
driver (Christoph Niedermaier).
- Use dev_err_probe() in Qualcomm's cpufreq driver (Andrew Halaney).
* pm-cpufreq:
cpufreq: intel_pstate: Fix scaling for hybrid-capable systems with disabled E-cores
cpufreq: Make CONFIG_CPUFREQ_DT_PLATDEV depend on OF
cpufreq: qcom-cpufreq-hw: Use dev_err_probe() when failing to get icc paths
cpufreq: mediatek: correct voltages for MT7622 and MT7623
cpufreq: armada-8k: add ap807 support
cpufreq: dt-platdev: Support building as module
dt-bindings: cpufreq: qcom-cpufreq-nvmem: document IPQ8074
cpufreq: dt-platdev: Blacklist ti,am62a7 SoC
cpufreq: ti-cpufreq: Add support for AM62A7
cpufreq: imx6q: don't warn for disabling a non-existing frequency
cpufreq: sparc: Don't allocate cpufreq_driver dynamically
cpufreq: tegra194: Fix an error handling path in tegra194_cpufreq_probe()
cpufreq: dt-platdev: Add JH7110 SOC to the allowlist
* pm-cpuidle:
intel_idle: Add __init annotation to matchup_vm_state_with_baremetal()
|
|
Commit 493ffb046cf5 ("clk: tegra: super: Switch to determine_rate")
replaced clk_super_round_rate() by clk_super_determine_rate(), but
didn't update one callsite that was explicitly calling the old
tegra_clk_super_ops.round_rate() function, which was now NULL. This
resulted in a crash on Tegra30 systems during early boot.
Switch this callsite over to the clk_super_determine_rate() equivalent
to avoid the crash.
Fixes: 493ffb046cf5 ("clk: tegra: super: Switch to determine_rate")
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20230630130748.840729-1-thierry.reding@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
This is an addition to commit ae80b4041984 ("mm: validate the mm before
dropping the mmap lock"), because it turns out there were two problems,
but lockdep just stopped complaining after finding the first one.
The do_vmi_align_munmap() function now drops the mmap lock after doing
the validate_mm() call, but it turns out that one of the callers then
immediately calls validate_mm() again.
That's both a bit silly, and now (again) happens without the mmap lock
held.
So just remove that validate_mm() call from the caller, but make sure to
not lose any coverage by doing that mm sanity checking in the error path
of do_vmi_align_munmap() too.
Reported-and-tested-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/lkml/ZKN6CdkKyxBShPHi@xsang-OptiPlex-9020/
Fixes: 408579cd627a ("mm: Update do_vmi_align_munmap() return semantics")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit ae870a68b5d1 ("arm64/mm: Convert to using
lock_mm_and_find_vma()") made do_page_fault() to use 'vma' even if
CONFIG_PER_VMA_LOCK is not defined, but the declaration is still in the
ifdef.
As a result, building kernel without the config fails with undeclared
variable error as below:
arch/arm64/mm/fault.c: In function 'do_page_fault':
arch/arm64/mm/fault.c:624:2: error: 'vma' undeclared (first use in this function); did you mean 'vmap'?
624 | vma = lock_mm_and_find_vma(mm, addr, regs);
| ^~~
| vmap
Fix it by moving the declaration out of the ifdef.
Fixes: ae870a68b5d1 ("arm64/mm: Convert to using lock_mm_and_find_vma()")
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull more block updates from Jens Axboe:
"Mostly items that came in a bit late for the initial pull request,
wanted to make sure they had the appropriate amount of linux-next soak
before going upstream.
Outside of stragglers, just generic fixes for either merge window
items, or longer standing bugs"
* tag 'block-6.5-2023-07-03' of git://git.kernel.dk/linux: (25 commits)
md/raid0: add discard support for the 'original' layout
nvme: disable controller on reset state failure
nvme: sync timeout work on failed reset
nvme: ensure unquiesce on teardown
cdrom/gdrom: Fix build error
nvme: improved uring polling
block: add request polling helper
nvme-mpath: fix I/O failure with EAGAIN when failing over I/O
nvme: host: fix command name spelling
blk-sysfs: add a new attr_group for blk_mq
blk-iocost: move wbt_enable/disable_default() out of spinlock
blk-wbt: cleanup rwb_enabled() and wbt_disabled()
blk-wbt: remove dead code to handle wbt enable/disable with io inflight
blk-wbt: don't create wbt sysfs entry if CONFIG_BLK_WBT is disabled
blk-mq: fix two misuses on RQF_USE_SCHED
blk-throttle: Fix io statistics for cgroup v1
bcache: Fix bcache device claiming
bcache: Alloc holder object before async registration
raid10: avoid spin_lock from fastpath from raid10_unplug()
md: fix 'delete_mutex' deadlock
...
|
|
Pull io_uring fixes from Jens Axboe:
"The fix for the msghdr->msg_inq assigned value being wrong, using -1
instead of -1U for the signed type.
Also a fix for ensuring when we're trying to run task_work on an
exiting task, that we wait for it. This is not really a correctness
thing as the work is being canceled, but it does help with ensuring
file descriptors are closed when the task has exited."
* tag 'io_uring-6.5-2023-07-03' of git://git.kernel.dk/linux:
io_uring: flush offloaded and delayed task_work on exit
io_uring: remove io_fallback_tw() forward declaration
io_uring/net: use proper value for msg_inq
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi
Pull HSI updates from Sebastian Reichel:
- fix build warning with W=1
- drop error handling for debugfs
* tag 'hsi-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi:
HSI: omap_ssi_port: Drop error checking for debugfs_create_dir
HSI: fix ssi_waketest() declaration
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
- Add new Qualcomm PMI8998/PM660 SMB2 charger
- bq256xx: support systems without thermistors
- cros_pchg: fix peripheral device status after system resume
- axp20x_usb_power: add support for AXP192
- qcom-pon: add support for pm8941
- at91-reset: prepare to expose reset reason to sysfs
- switch all I2C drivers back to use .probe instead of .probe_new
- convert some more DT bindings to YAML
- misc cleanups
* tag 'for-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (28 commits)
MAINTAINERS: add documentation file for Microchip SAMA5D2 shutdown controller
dt-bindings: power: reset: atmel,sama5d2-shdwc: convert to yaml
dt-bindings: power: reset: atmel,at91sam9260-shdwc: convert to yaml
power: reset: at91-reset: change the power on reason prototype
power: reset: qcom-pon: add support for pm8941-pon
dt-bindings: power: reset: qcom-pon: define pm8941-pon
power: supply: add Qualcomm PMI8998 SMB2 Charger driver
dt-bindings: power: supply: qcom,pmi8998-charger: add bindings for smb2 driver
power: supply: rt9467: Make charger-enable control as logic level
power: supply: Switch i2c drivers back to use .probe()
power: reset: add HAS_IOPORT dependencies
dt-bindings: power: supply: axp20x: Add AXP192 compatible
power: supply: axp20x_usb_power: Add support for AXP192
power: supply: axp20x_usb_power: Remove variant IDs from VBUS polling check
power: supply: axp20x_usb_power: Use regmap field for VBUS disabling
power: supply: axp20x_usb_power: Use regmap fields for USB BC feature
power: supply: axp20x_usb_power: Use regmap fields for VBUS monitor feature
power: supply: axp20x_usb_power: Simplify USB current limit handling
power: supply: hwmon: constify pointers to hwmon_channel_info
power: supply: twl4030_madc_battery: Refactor twl4030_madc_bat_ext_changed()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
"The bulk of these patches relates to the moving to a void-returning
remove callback.
The i.MX HiFi remoteproc driver gets its pm_ops helpers updated to
resolve build warnings about 'defined but not used' variables in
certain configurations.
The ST STM32 remoteproc driver is extended to allow using a SCMI reset
controller to hold boot, and has an error message corrected.
The Qualcomm Q6V5 PAS driver gains a missing 'static' qualifier on
adsp_segment_dump()"
* tag 'rproc-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (23 commits)
remoteproc: qcom_q6v5_pas: staticize adsp_segment_dump()
remoteproc: stm32: Fix error code in stm32_rproc_parse_dt()
remoteproc: stm32: Allow hold boot management by the SCMI reset controller
dt-bindings: remoteproc: st,stm32-rproc: Rework reset declarations
remoteproc: imx_dsp_rproc: use modern pm_ops
remoteproc: wkup_m3: Convert to platform remove callback returning void
remoteproc: stm32: Convert to platform remove callback returning void
remoteproc: st: Convert to platform remove callback returning void
remoteproc: virtio: Convert to platform remove callback returning void
remoteproc: rcar: Convert to platform remove callback returning void
remoteproc: qcom_wcnss: Convert to platform remove callback returning void
remoteproc: qcom_q6v5_wcss: Convert to platform remove callback returning void
remoteproc: qcom_q6v5_pas: Convert to platform remove callback returning void
remoteproc: qcom_q6v5_mss: Convert to platform remove callback returning void
remoteproc: qcom_q6v5_adsp: Convert to platform remove callback returning void
remoteproc: pru: Convert to platform remove callback returning void
remoteproc: omap: Convert to platform remove callback returning void
remoteproc: mtk_scp: Convert to platform remove callback returning void
remoteproc: meson_mx_ao_arc: Convert to platform remove callback returning void
remoteproc: keystone: Convert to platform remove callback returning void
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull hwspinlock update from Bjorn Andersson:
"This drops the last of_match_ptr() from the hwspinlock drivers,
solving the resulting 'defined but not used' warning/error"
* tag 'hwlock-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
hwspinlock: omap: drop of_match_ptr for ID table
|
|
After a change to the bnxt_re driver, it fails to link when
CONFIG_INFINIBAND_USER_ACCESS is disabled:
aarch64-linux-ld: drivers/infiniband/hw/bnxt_re/ib_verbs.o: in function `bnxt_re_handler_BNXT_RE_METHOD_ALLOC_PAGE':
ib_verbs.c:(.text+0xd64): undefined reference to `ib_uverbs_get_ucontext_file'
aarch64-linux-ld: drivers/infiniband/hw/bnxt_re/ib_verbs.o:(.rodata+0x168): undefined reference to `uverbs_idr_class'
aarch64-linux-ld: drivers/infiniband/hw/bnxt_re/ib_verbs.o:(.rodata+0x1a8): undefined reference to `uverbs_destroy_def_handler'
The problem is that the 'bnxt_re_uapi_defs' structure is built
unconditionally and references a couple of functions that are never
really called in this configuration but instead require other functions
that are left out.
Adding an #ifdef around the new code, or a Kconfig dependency would
address this problem, but adding the compile-time check inside of the
UAPI_DEF_CHAIN_OBJ_TREE_NAMED() macro seems best because that also
addresses the problem in other drivers that may run into the same
dependency.
Fixes: 360da60d6c6ed ("RDMA/bnxt_re: Enable low latency push")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull virtio updates from Michael Tsirkin:
- resume support in vdpa/solidrun
- structure size optimizations in virtio_pci
- new pds_vdpa driver
- immediate initialization mechanism for vdpa/ifcvf
- interrupt bypass for vdpa/mlx5
- multiple worker support for vhost
- viirtio net in Intel F2000X-PL support for vdpa/ifcvf
- fixes, cleanups all over the place
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (48 commits)
vhost: Make parameter name match of vhost_get_vq_desc()
vduse: fix NULL pointer dereference
vhost: Allow worker switching while work is queueing
vhost_scsi: add support for worker ioctls
vhost: allow userspace to create workers
vhost: replace single worker pointer with xarray
vhost: add helper to parse userspace vring state/file
vhost: remove vhost_work_queue
vhost_scsi: flush IO vqs then send TMF rsp
vhost_scsi: convert to vhost_vq_work_queue
vhost_scsi: make SCSI cmd completion per vq
vhost_sock: convert to vhost_vq_work_queue
vhost: convert poll work to be vq based
vhost: take worker or vq for flushing
vhost: take worker or vq instead of dev for queueing
vhost, vhost_net: add helper to check if vq has work
vhost: add vhost_worker pointer to vhost_virtqueue
vhost: dynamically allocate vhost_worker
vhost: create worker at end of vhost_dev_set_owner
virtio_bt: call scheduler when we free unused buffs
...
|
|
Pull kvm updates from Paolo Bonzini:
"ARM64:
- Eager page splitting optimization for dirty logging, optionally
allowing for a VM to avoid the cost of hugepage splitting in the
stage-2 fault path.
- Arm FF-A proxy for pKVM, allowing a pKVM host to safely interact
with services that live in the Secure world. pKVM intervenes on
FF-A calls to guarantee the host doesn't misuse memory donated to
the hyp or a pKVM guest.
- Support for running the split hypervisor with VHE enabled, known as
'hVHE' mode. This is extremely useful for testing the split
hypervisor on VHE-only systems, and paves the way for new use cases
that depend on having two TTBRs available at EL2.
- Generalized framework for configurable ID registers from userspace.
KVM/arm64 currently prevents arbitrary CPU feature set
configuration from userspace, but the intent is to relax this
limitation and allow userspace to select a feature set consistent
with the CPU.
- Enable the use of Branch Target Identification (FEAT_BTI) in the
hypervisor.
- Use a separate set of pointer authentication keys for the
hypervisor when running in protected mode, as the host is untrusted
at runtime.
- Ensure timer IRQs are consistently released in the init failure
paths.
- Avoid trapping CTR_EL0 on systems with Enhanced Virtualization
Traps (FEAT_EVT), as it is a register commonly read from userspace.
- Erratum workaround for the upcoming AmpereOne part, which has
broken hardware A/D state management.
RISC-V:
- Redirect AMO load/store misaligned traps to KVM guest
- Trap-n-emulate AIA in-kernel irqchip for KVM guest
- Svnapot support for KVM Guest
s390:
- New uvdevice secret API
- CMM selftest and fixes
- fix racy access to target CPU for diag 9c
x86:
- Fix missing/incorrect #GP checks on ENCLS
- Use standard mmu_notifier hooks for handling APIC access page
- Drop now unnecessary TR/TSS load after VM-Exit on AMD
- Print more descriptive information about the status of SEV and
SEV-ES during module load
- Add a test for splitting and reconstituting hugepages during and
after dirty logging
- Add support for CPU pinning in demand paging test
- Add support for AMD PerfMonV2, with a variety of cleanups and minor
fixes included along the way
- Add a "nx_huge_pages=never" option to effectively avoid creating NX
hugepage recovery threads (because nx_huge_pages=off can be toggled
at runtime)
- Move handling of PAT out of MTRR code and dedup SVM+VMX code
- Fix output of PIC poll command emulation when there's an interrupt
- Add a maintainer's handbook to document KVM x86 processes,
preferred coding style, testing expectations, etc.
- Misc cleanups, fixes and comments
Generic:
- Miscellaneous bugfixes and cleanups
Selftests:
- Generate dependency files so that partial rebuilds work as
expected"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (153 commits)
Documentation/process: Add a maintainer handbook for KVM x86
Documentation/process: Add a label for the tip tree handbook's coding style
KVM: arm64: Fix misuse of KVM_ARM_VCPU_POWER_OFF bit index
RISC-V: KVM: Remove unneeded semicolon
RISC-V: KVM: Allow Svnapot extension for Guest/VM
riscv: kvm: define vcpu_sbi_ext_pmu in header
RISC-V: KVM: Expose IMSIC registers as attributes of AIA irqchip
RISC-V: KVM: Add in-kernel virtualization of AIA IMSIC
RISC-V: KVM: Expose APLIC registers as attributes of AIA irqchip
RISC-V: KVM: Add in-kernel emulation of AIA APLIC
RISC-V: KVM: Implement device interface for AIA irqchip
RISC-V: KVM: Skeletal in-kernel AIA irqchip support
RISC-V: KVM: Set kvm_riscv_aia_nr_hgei to zero
RISC-V: KVM: Add APLIC related defines
RISC-V: KVM: Add IMSIC related defines
RISC-V: KVM: Implement guest external interrupt line management
KVM: x86: Remove PRIx* definitions as they are solely for user space
s390/uv: Update query for secret-UVCs
s390/uv: replace scnprintf with sysfs_emit
s390/uvdevice: Add 'Lock Secret Store' UVC
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux
Pull kgdb updates from Daniel Thompson:
"Fairly small changes this cycle:
- An additional static inline function when kgdb is not enabled to
reduce boilerplate in arch files
- kdb will now handle input with linefeeds more like carriage return.
This will make little difference for interactive use but can make
it script to use expect-like interaction with kdb
- A couple of warning fixes"
* tag 'kgdb-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
kdb: move kdb_send_sig() declaration to a better header file
kdb: Handle LF in the command parser
kdb: include kdb_private.h for function prototypes
kgdb: Provide a stub kgdb_nmicallback() if !CONFIG_KGDB
|
|
Function do_qc has two main uses: (1) to re-sync the local quota changes
(qd) to the master quotas, and (2) normal quota changes. In the case of
normal quota changes, the change can be positive or negative, as the
quota usage goes up and down.
Before this patch function do_qc was distinguishing one from another by
whether the resulting value is or isn't zero: In the case of a re-sync
(called do_sync) the quota value is moved from the temporary value to a
master value, so the amount is added to one and subtracted from the
other. The problem is that since the values can be positive or negative
we can occasionally run into situations where we are not doing a re-sync
but the quota change just happens to cancel out the previous value.
In the case of a re-sync extra references and locks are taken, and so
do_qc needs to release them. In the case of a normal quota change, no
extra references and locks are taken, so it must not try to release
them.
The problem is: if the quota change is not a re-sync but the value just
happens to cancel out the original quota change, the resulting zero
value fools do_qc into thinking this is a re-sync and therefore it must
release the extra references. This results in problems, mainly having to
do with slot reference numbers going smaller than zero.
This patch introduces new constants, QC_SYNC and QC_CHANGE so do_qc can
really tell the difference. For QC_SYNC calls it must release the extra
references acquired by gfs2_quota_unlock's call to qd_check_sync. For
QC_CHANGE calls it does not have extra references to put.
Note that this allows quota changes back to a value of zero, and so I
removed an assert warning related to that.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Replace kmap_local_page() + memcpy() + kunmap_local() sequences with
memcpy_{from,to}_page() where we are not doing anything else with the
mapped page.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Replace the remaining instances of kmap_atomic() ... kunmap_atomic()
with kmap_local_page() ... kunmap_local().
In gfs2_write_buf_to_page(), we can call flush_dcache_page() after
unmapping the page.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
kmap_atomic() is deprecated in favor of kmap_local_{folio,page}().
Therefore, replace kmap_atomic() with kmap_local_page() in
gfs2_internal_read() and stuffed_readpage().
kmap_atomic() disables page-faults and preemption (the latter only for
!PREEMPT_RT kernels), However, the code within the mapping/un-mapping in
gfs2_internal_read() and stuffed_readpage() does not depend on the
above-mentioned side effects.
Therefore, a mere replacement of the old API with the new one is all that
is required (i.e., there is no need to explicitly add any calls to
pagefault_disable() and/or preempt_disable()).
Signed-off-by: Deepak R Varma <drv@mailo.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Commit 27a2660f1ef9 ("gfs2: Dump nrpages for inodes and their glocks")
added some locking around reading inode->i_data.nrpages. That locking
doesn't do anything really, so get rid of it.
With that, the glock argument to ->go_dump() can be made const again as
well.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
All the remaining users of gfs2_freeze_lock_shared() set freeze_gh to
&sdp->sd_freeze_gh and flags to 0, so remove those two parameters.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Replace sd_freeze_state with a new SDF_FROZEN flag.
There no longer is a need for indicating that a freeze is in progress
(SDF_STARTING_FREEZE); we are now protecting the critical sections with
the sd_freeze_mutex.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
So far, at mount time, gfs2 would take the freeze glock in shared mode
and then immediately drop it again, turning it into a cached glock that
can be reclaimed at any time. To freeze the filesystem cluster-wide,
the node initiating the freeze would take the freeze glock in exclusive
mode, which would cause the freeze glock's freeze_go_sync() callback to
run on each node. There, gfs2 would freeze the filesystem and schedule
gfs2_freeze_func() to run. gfs2_freeze_func() would re-acquire the
freeze glock in shared mode, thaw the filesystem, and drop the freeze
glock again. The initiating node would keep the freeze glock held in
exclusive mode. To thaw the filesystem, the initiating node would drop
the freeze glock again, which would allow gfs2_freeze_func() to resume
on all nodes, leaving the filesystem in the thawed state.
It turns out that in freeze_go_sync(), we cannot reliably and safely
freeze the filesystem. This is primarily because the final unmount of a
filesystem takes a write lock on the s_umount rw semaphore before
calling into gfs2_put_super(), and freeze_go_sync() needs to call
freeze_super() which also takes a write lock on the same semaphore,
causing a deadlock. We could work around this by trying to take an
active reference on the super block first, which would prevent unmount
from running at the same time. But that can fail, and freeze_go_sync()
isn't actually allowed to fail.
To get around this, this patch changes the freeze glock locking scheme
as follows:
At mount time, each node takes the freeze glock in shared mode. To
freeze a filesystem, the initiating node first freezes the filesystem
locally and then drops and re-acquires the freeze glock in exclusive
mode. All other nodes notice that there is contention on the freeze
glock in their go_callback callbacks, and they schedule
gfs2_freeze_func() to run. There, they freeze the filesystem locally
and drop and re-acquire the freeze glock before re-thawing the
filesystem. This is happening outside of the glock state engine, so
there, we are allowed to fail.
From a cluster point of view, taking and immediately dropping a glock is
indistinguishable from taking the glock and only dropping it upon
contention, so this new scheme is compatible with the old one.
Thanks to Li Dong <lidong@vivo.com> for reporting a locking bug in
gfs2_freeze_func() in a previous version of this commit.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt driver updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver updates for 6.5-rc1.
Included in here are:
- Lots of USB4/Thunderbolt additions and updates for new hardware
types and fixes as people are starting to get access to the
hardware in the wild
- new gadget controller driver, cdns2, added
- new typec drivers added
- xhci driver updates
- typec driver updates
- usbip driver fixes
- usb-serial driver updates and fixes
- lots of smaller USB driver updates
All of these have been in linux-next for a while with no reported
problems"
* tag 'usb-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (265 commits)
usb: host: xhci-plat: Set XHCI_STATE_REMOVING before resuming XHCI HC
usb: host: xhci: Do not re-initialize the XHCI HC if being removed
usb: typec: nb7vpq904m: fix CONFIG_DRM dependency
usbip: usbip_host: Replace strlcpy with strscpy
usb: dwc3: gadget: Propagate core init errors to UDC during pullup
USB: serial: option: add LARA-R6 01B PIDs
usb: ulpi: Make container_of() no-op in to_ulpi_dev()
usb: gadget: legacy: fix error return code in gfs_bind
usb: typec: fsa4480: add support for Audio Accessory Mode
usb: typec: fsa4480: rework mux & switch setup to handle more states
usb: typec: ucsi: call typec_set_mode on non-altmode partner change
USB: gadget: f_hid: make hidg_class a static const structure
USB: gadget: f_printer: make usb_gadget_class a static const structure
USB: mon: make mon_bin_class a static const structure
USB: gadget: udc: core: make udc_class a static const structure
USB: roles: make role_class a static const structure
dt-bindings: usb: dwc3: Add interrupt-names property support for wakeup interrupt
dt-bindings: usb: Add StarFive JH7110 USB controller
dt-bindings: usb: dwc3: Add IPQ9574 compatible
usb: cdns2: Fix spelling mistake in a trace message "Wakupe" -> "Wakeup"
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver updates from Greg KH:
"Here is the big set of tty/serial driver updates for 6.5-rc1.
Included in here are:
- tty_audit code cleanups from Jiri
- more 8250 cleanups from Ilpo
- samsung_tty driver bugfixes
- 8250 lock port updates
- usual fsl_lpuart driver updates and fixes
- other small serial driver fixes and updates, full details in the
shortlog
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (58 commits)
tty_audit: make data of tty_audit_log() const
tty_audit: make tty pointers in exposed functions const
tty_audit: make icanon a bool
tty_audit: invert the condition in tty_audit_log()
tty_audit: use kzalloc() in tty_audit_buf_alloc()
tty_audit: use TASK_COMM_LEN for task comm
Revert "8250: add support for ASIX devices with a FIFO bug"
serial: atmel: don't enable IRQs prematurely
tty: serial: Add Nuvoton ma35d1 serial driver support
tty: serial: fsl_lpuart: add earlycon for imx8ulp platform
tty: serial: imx: fix rs485 rx after tx
selftests: tty: add selftest for tty timestamp updates
tty: tty_io: update timestamps on all device nodes
tty: fix hang on tty device with no_room set
serial: core: fix -EPROBE_DEFER handling in init
serial: 8250_omap: Use force_suspend and resume for system suspend
tt |
