| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Borislav Petkov:
- Have timekeeping aux clocks sysfs interface setup function return an
error code on failure instead of success
* tag 'timers_urgent_for_v6.18_rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timekeeping: Fix error code in tk_aux_sysfs_init()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fix from Thomas Bogendoerfer:
"Fix TLB unification for cores with more than 64 TLB entries"
* tag 'mips-fixes_6.18_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: mm: kmalloc tlb_vpn array to avoid stack overflow
|
|
Owing to Config4.MMUSizeExt and VTLB/FTLB MMU features later MIPSr2+
cores can have more than 64 TLB entries. Therefore allocate an array
for uniquification instead of placing too an small array on the stack.
Fixes: 35ad7e181541 ("MIPS: mm: tlb-r4k: Uniquify TLB entries on init")
Co-developed-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Cc: stable@vger.kernel.org # v6.17+: 9f048fa48740: MIPS: mm: Prevent a TLB shutdown on initial uniquification
Cc: stable@vger.kernel.org # v6.17+
Tested-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Tested-by: Klara Modin <klarasmodin@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Fix an uninitialised variable (key) in afs_alloc_anon_key() by setting it
to cell->anonymous_key. Without this change, the error check may return a
false failure with a bad error number.
Most of the time this is unlikely to happen because the first encounter
with afs_alloc_anon_key() will usually be from (auto)mount, for which all
subsequent operations must wait - apart from other (auto)mounts. Once the
call->anonymous_key is allocated, all further calls to afs_request_key()
will skip the call to afs_alloc_anon_key() for that cell.
Fixes: d27c71257825 ("afs: Fix delayed allocation of a cell's anonymous key")
Reported-by: Paulo Alcantra <pc@manguebit.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Paulo Alcantara <pc@manguebit.org>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: syzbot+41c68824eefb67cdf00c@syzkaller.appspotmail.com
cc: linux-afs@lists.infradead.org
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A disappointingly large set of device specific fixes that have built
up since I've been a bit tardy with sending a pull requests as people
kept sending me new new fixes.
The bcm63xx and lpspi issues could lead to corruption so the fixes are
fairly important for the affected parts, the other issues should all
be relatively minor"
* tag 'spi-fix-v6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: nxp-fspi: Propagate fwnode in ACPI case as well
spi: tegra114: remove Kconfig dependency on TEGRA20_APB_DMA
spi: amlogic-spifc-a1: Handle devm_pm_runtime_enable() errors
spi: spi-fsl-lpspi: fix watermark truncation caused by type cast
spi: cadence-quadspi: Fix cqspi_probe() error handling for runtime pm
spi: bcm63xx: fix premature CS deassertion on RX-only transactions
spi: spi-cadence-quadspi: Remove duplicate pm_runtime_put_autosuspend() call
spi: spi-cadence-quadspi: Enable pm runtime earlier to avoid imbalance
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A couple of fixes for incorrect device descriptions in the rtq2208
driver"
* tag 'regulator-fix-v6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: rtq2208: Correct LDO2 logic judgment bits
regulator: rtq2208: Correct buck group2 phase mapping logic
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fixes from Jens Axboe:
- Ensure that vectored registered buffer imports ties the lifetime of
those to the zero-copy send notification, not the parent request
- Fix a bug introduced in this merge window, with the introduction of
mixed sized CQE support
* tag 'io_uring-6.18-20251128' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring: fix mixed cqe overflow handling
io_uring/net: ensure vectored buffer node import is tied to notification
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- afs: Fix delayed allocation of a cell's anonymous key
The allocation of a cell's anonymous key is done in a background
thread along with other cell setup such as doing a DNS upcall. The
normal key lookup tries to use the key description on the anonymous
authentication key as the reference for request_key() - but it may
not yet be set, causing an oops
- ovl: fail ovl_lock_rename_workdir() if either target is unhashed
As well as checking that the parent hasn't changed after getting the
lock, the code needs to check that the dentry hasn't been unhashed.
Otherwise overlayfs might try to rename something that has been
removed
- namespace: fix a reference leak in grab_requested_mnt_ns
lookup_mnt_ns() already takes a reference on mnt_ns, and so
grab_requested_mnt_ns() doesn't need to take an extra reference
* tag 'vfs-6.18-rc8.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
afs: Fix delayed allocation of a cell's anonymous key
ovl: fail ovl_lock_rename_workdir() if either target is unhashed
fs/namespace: fix reference leak in grab_requested_mnt_ns
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"A few last minute fixes came in this week:
- interrupt and gpio numbers in foud separate i.MX8 specific
devicetree files were wrong
- The vector length property in the C906 CPU description used the
wrong unit
- Two bugs with uninitialized stack variables in the tee subsystem
- Alexander Stein now maintains additional devicetree files"
* tag 'soc-fixes-6.18-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
riscv: dts: allwinner: d1: fix vlenb property
MAINTAINERS: Add entry for TQ-Systems AM335 device trees
tee: qcomtee: initialize result before use in release worker
arm64: dts: imx8qm-mek: fix mux-controller select/enable-gpios polarity
tee: qcomtee: fix uninitialized pointers with free attribute
ARM: dts: nxp: imx6ul: correct SAI3 interrupt line
arm64: dts: imx8dxl-ss-conn: swap interrupts number of eqos
arm64: dts: imx8dxl: Correct pcie-ep interrupt number
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc / IIO fixes from Greg KH:
"Here are some much-delayed char/misc/iio driver fixes for 6.18-rc8.
Fixes in here include:
- lots of iio driver bugfixes for reported issues.
- counter driver bugfix
- slimbus driver bugfix
- mei tiny bugfix
- nvmem layout uevent bugfix
All of these have been in linux-next for a while, but due to travel on
my side, I haven't had a chance to get them to you"
* tag 'char-misc-6.18-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (23 commits)
nvmem: layouts: fix nvmem_layout_bus_uevent
iio: accel: bmc150: Fix irq assumption regression
most: usb: fix double free on late probe failure
slimbus: ngd: Fix reference count leak in qcom_slim_ngd_notify_slaves
firmware: stratix10-svc: fix bug in saving controller data
mei: fix error flow in probe
iio: st_lsm6dsx: Fixed calibrated timestamp calculation
iio: humditiy: hdc3020: fix units for thresholds and hysteresis
iio: humditiy: hdc3020: fix units for temperature and humidity measurement
iio: imu: st_lsm6dsx: fix array size for st_lsm6dsx_settings fields
iio: accel: fix ADXL355 startup race condition
iio: adc: ad7124: fix temperature channel
iio:common:ssp_sensors: Fix an error handling path ssp_probe()
iio: adc: ad7280a: fix ad7280_store_balance_timer()
iio: buffer-dmaengine: enable .get_dma_dev()
iio: buffer-dma: support getting the DMA channel
iio: buffer: support getting dma channel from the buffer
iio: pressure: bmp280: correct meas_time_us calculation
iio: adc: stm32-dfsdm: fix st,adc-alt-channel property handling
iio: adc: ad7380: fix SPI offload trigger rate
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull serial driver fixes from Greg KH:
"Here are two serial driver fixes for reported issues for 6.18-rc8.
These are:
- fix for a much reported symbol build loop that broke the build for
some kernel configurations
- amba-pl011 driver bugfix for a reported issue
Both have been in linux next (the last for weeks, the first for a
shorter amount of time), with no reported issues"
* tag 'tty-6.18-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: 8250: Fix 8250_rsa symbol loop
serial: amba-pl011: prefer dma_mapping_error() over explicit address checking
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/Thunderbolt fixes from Greg KH:
"Here are some last-minutes USB and Thunderbolt driver fixes and new
device ids for 6.18-rc8. Included in here are:
- usb storage quirk fixup
- xhci driver fixes for reported issues
- usb gadget driver fixes
- dwc3 driver fixes
- UAS driver fixup
- thunderbolt new device ids
- usb-serial driver new ids
All of these have been in linux-next with no reported issues, many for
many weeks"
* tag 'usb-6.18-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (21 commits)
usb: gadget: renesas_usbf: Handle devm_pm_runtime_enable() errors
USB: storage: Remove subclass and protocol overrides from Novatek quirk
usb: uas: fix urb unmapping issue when the uas device is remove during ongoing data transfer
usb: dwc3: Fix race condition between concurrent dwc3_remove_requests() call paths
xhci: dbgtty: fix device unregister
usb: storage: sddr55: Reject out-of-bound new_pba
USB: serial: option: add support for Rolling RW101R-GL
usb: typec: ucsi: psy: Set max current to zero when disconnected
usb: gadget: f_eem: Fix memory leak in eem_unwrap
usb: dwc3: pci: Sort out the Intel device IDs
usb: dwc3: pci: add support for the Intel Nova Lake -S
drivers/usb/dwc3: fix PCI parent check
usb: storage: Fix memory leak in USB bulk transport
xhci: sideband: Fix race condition in sideband unregister
xhci: dbgtty: Fix data corruption when transmitting data form DbC to host
xhci: fix stale flag preventig URBs after link state error is cleared
USB: serial: ftdi_sio: add support for u-blox EVK-M101
usb: cdns3: Fix double resource release in cdns3_pci_probe
usb: gadget: udc: fix use-after-free in usb_gadget_state_work
usb: renesas_usbhs: Fix synchronous external abort on unbind
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox
Pull mailbox fixes from Jassi Brar:
- omap: check for pending msgs only when mbox is exclusive
- mailbox-test: debugfs_create_dir error checking
- mtk:
- cmdq: fix DMA address handling
- gpueb: Add missing 'static' to mailbox ops struct
- pcc: don't zero error register
- th1520: fix clock imbalance on probe failure
* tag 'mailbox-fixes-v6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox:
mailbox: th1520: fix clock imbalance on probe failure
mailbox: pcc: don't zero error register
mailbox: mtk-gpueb: Add missing 'static' to mailbox ops struct
mailbox: mtk-cmdq: Refine DMA address handling for the command buffer
mailbox: mailbox-test: Fix debugfs_create_dir error checking
mailbox: omap-mailbox: Check for pending msgs only when mbox is exclusive
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes
Allwinner fixes for 6.18
Just one fix to correct the "thead,vlenb" property for the RISC-V based
D1 SoC family.
* tag 'sunxi-fixes-for-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
riscv: dts: allwinner: d1: fix vlenb property
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap into arm/fixes
MAINTAINERS: Add entry for TQ-Systems AM335 device trees
* tag 'omap-for-v6.19/maintainers-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap:
MAINTAINERS: Add entry for TQ-Systems AM335 device trees
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fix from Ulf Hansson:
- sdhci-of-dwcmshc: Fix reset handling for some variants
* tag 'mmc-v6.18-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-of-dwcmshc: Promote the th1520 reset handling to ip level
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain fixes from Ulf Hansson:
- mediatek: Fix spinlock recursion in probe
- tegra: Use GENPD_FLAG_NO_STAY_ON to restore old behaviour
* tag 'pmdomain-v6.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
pmdomain: tegra: Add GENPD_FLAG_NO_STAY_ON flag
pmdomains: mtk-pm-domains: Fix spinlock recursion in probe
|
|
The purpose of the devm_add_action_or_reset() helper is to call the
action function in case adding an action ever fails so drop the clock
disable from the error path to avoid disabling the clocks twice.
Fixes: 5d4d263e1c6b ("mailbox: Introduce support for T-head TH1520 Mailbox driver")
Cc: Michal Wilczynski <m.wilczynski@samsung.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Michal Wilczynski <m.wilczynski@samsung.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
The error status mask for a type 3/4 subspace is used for reading the
error status, and the bitwise inverse is used for clearing the error
with the intent being to preserve any of the non-error bits. However,
we were previously applying the mask to extract the status and then
applying the inverse to the result which ended up clearing all bits.
Instead, store the inverse mask in the preserve mask and then use that
on the original value read from the error status so that only the error
is cleared.
Fixes: c45ded7e1135 ("mailbox: pcc: Add support for PCCT extended PCC subspaces(type 3/4)")
Signed-off-by: Jamie Iles <jamie.iles@oss.qualcomm.com>
Signed-off-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
mtk_gpueb_mbox_ops should be declared static. However, due to its const
nature, this specifier was missed, as it compiled fine without it and
with no warning by the compiler.
arc-linux-gcc (GCC) 12.5.0 doesn't seem to like it however, so add the
static to fix that.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202510100629.3nGvrhEU-lkp@intel.com/
Fixes: dbca0eabb821 ("mailbox: add MediaTek GPUEB IPI mailbox")
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
GCE can only fetch the command buffer address from a 32-bit register.
Some SoCs support a 35-bit command buffer address for GCE, which
requires a right shift of 3 bits before setting the address into
the 32-bit register. A comment has been added to the header of
cmdq_get_shift_pa() to explain this requirement.
To prevent the GCE command buffer address from being DMA mapped beyond
its supported bit range, the DMA bit mask for the device is set during
initialization.
Additionally, to ensure the correct shift is applied when setting or
reading the register that stores the GCE command buffer address,
new APIs, cmdq_convert_gce_addr() and cmdq_revert_gce_addr(), have
been introduced for consistent operations on this register.
The variable type for the command buffer address has been standardized
to dma_addr_t to prevent handling issues caused by type mismatches.
Fixes: 0858fde496f8 ("mailbox: cmdq: variablize address shift in platform")
Signed-off-by: Jason-JH Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
The debugfs_create_dir() function returns ERR_PTR() on error, not NULL.
The current null-check fails to catch errors.
Use IS_ERR() to correctly check for errors.
Fixes: 8ea4484d0c2b ("mailbox: Add generic mechanism for testing Mailbox Controllers")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
On TI K3 devices, the mailbox resides in the Always-On power domain
(LPSC_main_alwayson) and is shared among multiple processors. The
mailbox is not solely exclusive to Linux.
Currently, the suspend path checks all FIFO queues for pending messages
and blocks suspend if any are present. This behavior is unnecessary for
K3 devices, since some of the FIFOs are used for RTOS<->RTOS
communication and are independent of Linux.
For FIFOs used in Linux<->RTOS communication, any pending message would
trigger an interrupt, which naturally prevents suspend from completing.
Hence, there is no need for the mailbox driver to explicitly check for
pending messages on K3 platforms.
Introduce a device match flag to indicate whether the mailbox instance
is exclusive to Linux, and skip the pending message check for
non-exclusive instances (such as in K3).
Fixes: a49f991e740f ("arm64: dts: ti: k3-am62-verdin: Add missing cfg for TI IPC Firmware")
Closes: https://lore.kernel.org/all/sid7gtg5vay5qgicsl6smnzwg5mnneoa35cempt5ddwjvedaio@hzsgcx6oo74l/
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Hiago De Franco <hiago.franco@toradex.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
The allocation of a cell's anonymous key is done in a background thread
along with other cell setup such as doing a DNS upcall. In the reported
bug, this is triggered by afs_parse_source() parsing the device name given
to mount() and calling afs_lookup_cell() with the name of the cell.
The normal key lookup then tries to use the key description on the
anonymous authentication key as the reference for request_key() - but it
may not yet be set and so an oops can happen.
This has been made more likely to happen by the fix for dynamic lookup
failure.
Fix this by firstly allocating a reference name and attaching it to the
afs_cell record when the record is created. It can share the memory
allocation with the cell name (unfortunately it can't just overlap the cell
name by prepending it with "afs@" as the cell name already has a '.'
prepended for other purposes). This reference name is then passed to
request_key().
Secondly, the anon key is now allocated on demand at the point a key is
requested in afs_request_key() if it is not already allocated. A mutex is
used to prevent multiple allocation for a cell.
Thirdly, make afs_request_key_rcu() return NULL if the anonymous key isn't
yet allocated (if we need it) and then the caller can return -ECHILD to
drop out of RCU-mode and afs_request_key() can be called.
Note that the anonymous key is kind of necessary to make the key lookup
cache work as that doesn't currently cache a negative lookup, but it's
probably worth some investigation to see if NULL can be used instead.
Fixes: 330e2c514823 ("afs: Fix dynamic lookup to fail on cell lookup failure")
Reported-by: syzbot+41c68824eefb67cdf00c@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://patch.msgid.link/800328.1764325145@warthog.procyon.org.uk
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
As well as checking that the parent hasn't changed after getting the
lock we need to check that the dentry hasn't been unhashed.
Otherwise we might try to rename something that has been removed.
Reported-by: syzbot+bfc9a0ccf0de47d04e8c@syzkaller.appspotmail.com
Fixes: d2c995581c7c ("ovl: Call ovl_create_temp() without lock held.")
Signed-off-by: NeilBrown <neil@brown.name>
Link: https://patch.msgid.link/176429295510.634289.1552337113663461690@noble.neil.brown.name
Tested-by: syzbot+bfc9a0ccf0de47d04e8c@syzkaller.appspotmail.com
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Pull drm fixes from Dave Airlie:
"Last one for this round hopefully, mostly the usual suspects,
xe/amdgpu, with some single fixes otherwise.
There is one amdgpu HDMI blackscreen bug that came in late in the
cycle, but it was bisected and the revert is in here.
i915:
- Reject async flips when PSR's selective fetch is enabled
xe:
- Fix resource leak in xe_guc_ct_init_noalloc()'s error path
- Fix stack_depot usage without STACKDEPOT_ALWAYS_INIT
- Fix overflow in conversion from clock tics to msec
amdgpu:
- Unified MES fix
- HDMI fix
- Cursor fix
- Bightness fix
- EDID reading improvement
- UserQ fix
- Cyan Skillfish IP discovery fix
bridge:
- sil902x: Fix HDMI detection
imagination:
- Update documentation
sti:
- Fix leaks in probe
vga_switcheroo:
- Avoid race condition during fbcon initialization"
* tag 'drm-fixes-2025-11-28' of https://gitlab.freedesktop.org/drm/kernel:
drm/amdgpu: fix cyan_skillfish2 gpu info fw handling
drm/amdgpu: attach tlb fence to the PTs update
drm/amd/display: Increase EDID read retries
drm/amd/display: Don't change brightness for disabled connectors
drm/amd/display: Check NULL before accessing
Revert "drm/amd/display: Move setup_stream_attribute"
drm/xe: Fix conversion from clock ticks to milliseconds
drm/xe/guc: Fix stack_depot usage
drm/xe/guc: Fix resource leak in xe_guc_ct_init_noalloc()
drm/i915/psr: Reject async flips when selective fetch is enabled
drm, fbcon, vga_switcheroo: Avoid race condition in fbcon setup
drm/amd/amdgpu: reserve vm invalidation engine for uni_mes
drm: sti: fix device leaks at component probe
drm/imagination: Document pvr_device.power member
drm/bridge: sii902x: Fix HDMI detection with DRM_BRIDGE_ATTACH_NO_CONNECTOR
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Driver Changes:
- Fix resource leak in xe_guc_ct_init_noalloc()'s error path (Shuicheng Lin)
- Fix stack_depot usage without STACKDEPOT_ALWAYS_INIT (Lucas)
- Fix overflow in conversion from clock tics to msec (Harish Chegondi)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patch.msgid.link/7ejiqjgthpqybg5svmkind2pszk4fqadxuq7rngchaaw76iept@5pn6sngqj6lk
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
Short summary of fixes pull:
bridge:
- sil902x: Fix HDMI detection
imagination:
- Update documentation
sti:
- Fix leaks in probe
vga_switcheroo:
- Avoid race condition during fbcon initialization
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20251127081007.GA13578@2a02-2454-fd5e-fd00-689d-32c0-780c-bb87.dyn6.pyur.net
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.18-2025-11-26:
amdgpu:
- Unified MES fix
- HDMI fix
- Cursor fix
- Bightness fix
- EDID reading improvement
- UserQ fix
- Cyan Skillfish IP discovery fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patch.msgid.link/20251126204925.3316684-1-alexander.deucher@amd.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux
Pull dma-mapping fixes from Marek Szyprowski:
"Two last minute fixes for the recently modified DMA API infrastructure:
- proper handling of DMA_ATTR_MMIO in dma_iova_unlink() function (me)
- regression fix for the code refactoring related to P2PDMA (Pranjal
Shrivastava)"
* tag 'dma-mapping-6.18-2025-11-27' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux:
dma-direct: Fix missing sg_dma_len assignment in P2PDMA bus mappings
iommu/dma: add missing support for DMA_ATTR_MMIO for dma_iova_unlink()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"One more urgent ACPI support fix for 6.18
There is one more commit that needs to be reverted after reverting
problematic commit 7a8c994cbb2d ("ACPI: processor: idle: Optimize ACPI
idle driver registration"), so revert it"
* tag 'acpi-6.18-rc8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "ACPI: processor: Update cpuidle driver check in __acpi_processor_start()"
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
- Reject async flips when PSR's selective fetch is enabled (Ville)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/aScgY8QMjmyJRBX2@intel.com
|
|
__acpi_processor_start()"
Revert commit 8a1b5d412cb4 ("ACPI: processor: Update cpuidle driver
check in __acpi_processor_start()") which depends on commit
7a8c994cbb2d ("ACPI: processor: idle: Optimize ACPI idle driver
registration") that got reverted.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Pull ceph fixes from Ilya Dryomov:
"A patch to make sparse read handling work in msgr2 secure mode from
Slava and a couple of fixes from Ziming and myself to avoid operating
on potentially invalid memory, all marked for stable"
* tag 'ceph-for-6.18-rc8' of https://github.com/ceph/ceph-client:
libceph: prevent potential out-of-bounds writes in handle_auth_session_key()
libceph: replace BUG_ON with bounds check for map->max_osd
ceph: fix crash in process_v2_sparse_read() for encrypted directories
libceph: drop started parameter of __ceph_open_session()
libceph: fix potential use-after-free in have_mon_and_osd_map()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bluetooth and CAN. No known outstanding
regressions.
Current release - regressions:
- mptcp: initialize rcv_mss before calling tcp_send_active_reset()
- eth: mlx5e: fix validation logic in rate limiting
Previous releases - regressions:
- xsk: avoid data corruption on cq descriptor number
- bluetooth:
- prevent race in socket write iter and sock bind
- fix not generating mackey and ltk when repairing
- can:
- kvaser_usb: fix potential infinite loop in command parsers
- rcar_canfd: fix CAN-FD mode as default
- eth:
- veth: reduce XDP no_direct return section to fix race
- virtio-net: avoid unnecessary checksum calculation on guest RX
Previous releases - always broken:
- sched: fix TCF_LAYER_TRANSPORT handling in tcf_get_base_ptr()
- bluetooth: mediatek: fix kernel crash when releasing iso interface
- vhost: rewind next_avail_head while discarding descriptors
- eth:
- r8169: fix RTL8127 hang on suspend/shutdown
- aquantia: add missing descriptor cache invalidation on ATL2
- dsa: microchip: fix resource releases in error path"
* tag 'net-6.18-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
mptcp: Initialise rcv_mss before calling tcp_send_active_reset() in mptcp_do_fastclose().
net: fec: do not register PPS event for PEROUT
net: fec: do not allow enabling PPS and PEROUT simultaneously
net: fec: do not update PEROUT if it is enabled
net: fec: cancel perout_timer when PEROUT is disabled
net: mctp: unconditionally set skb->dev on dst output
net: atlantic: fix fragment overflow handling in RX path
MAINTAINERS: separate VIRTIO NET DRIVER and add netdev
virtio-net: avoid unnecessary checksum calculation on guest RX
eth: fbnic: Fix counter roll-over issue
mptcp: clear scheduled subflows on retransmit
net: dsa: sja1105: fix SGMII linking at 10M or 100M but not passing traffic
s390/net: list Aswin Karuvally as maintainer
net: wwan: mhi: Keep modem name match with Foxconn T99W640
vhost: rewind next_avail_head while discarding descriptors
net/sched: em_canid: fix uninit-value in em_canid_match
can: rcar_canfd: Fix CAN-FD mode as default
xsk: avoid data corruption on cq descriptor number
r8169: fix RTL8127 hang on suspend/shutdown
net: sxgbe: fix potential NULL dereference in sxgbe_rx()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull platform driver fixes from Ilpo Järvinen:
- arm64/thinkpad-t14s-ec:
- Fix IRQ race condition
- Sleep after EC access
- intel/punit_ipc: Fix memory corruption
* tag 'platform-drivers-x86-v6.18-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: intel: punit_ipc: fix memory corruption
platform: arm64: thinkpad-t14s-ec: sleep after EC access
platform: arm64: thinkpad-t14s-ec: fix IRQ race condition
|
|
mptcp_do_fastclose().
syzbot reported divide-by-zero in __tcp_select_window() by
MPTCP socket. [0]
We had a similar issue for the bare TCP and fixed in commit
499350a5a6e7 ("tcp: initialize rcv_mss to TCP_MIN_MSS instead
of 0").
Let's apply the same fix to mptcp_do_fastclose().
[0]:
Oops: divide error: 0000 [#1] SMP KASAN PTI
CPU: 0 UID: 0 PID: 6068 Comm: syz.0.17 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025
RIP: 0010:__tcp_select_window+0x824/0x1320 net/ipv4/tcp_output.c:3336
Code: ff ff ff 44 89 f1 d3 e0 89 c1 f7 d1 41 01 cc 41 21 c4 e9 a9 00 00 00 e8 ca 49 01 f8 e9 9c 00 00 00 e8 c0 49 01 f8 44 89 e0 99 <f7> 7c 24 1c 41 29 d4 48 bb 00 00 00 00 00 fc ff df e9 80 00 00 00
RSP: 0018:ffffc90003017640 EFLAGS: 00010293
RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff88807b469e40
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffffc90003017730 R08: ffff888033268143 R09: 1ffff1100664d028
R10: dffffc0000000000 R11: ffffed100664d029 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
FS: 000055557faa0500(0000) GS:ffff888126135000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f64a1912ff8 CR3: 0000000072122000 CR4: 00000000003526f0
Call Trace:
<TASK>
tcp_select_window net/ipv4/tcp_output.c:281 [inline]
__tcp_transmit_skb+0xbc7/0x3aa0 net/ipv4/tcp_output.c:1568
tcp_transmit_skb net/ipv4/tcp_output.c:1649 [inline]
tcp_send_active_reset+0x2d1/0x5b0 net/ipv4/tcp_output.c:3836
mptcp_do_fastclose+0x27e/0x380 net/mptcp/protocol.c:2793
mptcp_disconnect+0x238/0x710 net/mptcp/protocol.c:3253
mptcp_sendmsg_fastopen+0x2f8/0x580 net/mptcp/protocol.c:1776
mptcp_sendmsg+0x1774/0x1980 net/mptcp/protocol.c:1855
sock_sendmsg_nosec net/socket.c:727 [inline]
__sock_sendmsg+0xe5/0x270 net/socket.c:742
__sys_sendto+0x3bd/0x520 net/socket.c:2244
__do_sys_sendto net/socket.c:2251 [inline]
__se_sys_sendto net/socket.c:2247 [inline]
__x64_sys_sendto+0xde/0x100 net/socket.c:2247
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0xfa0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f66e998f749
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffff9acedb8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 00007f66e9be5fa0 RCX: 00007f66e998f749
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003
RBP: 00007ffff9acee10 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001
R13: 00007f66e9be5fa0 R14: 00007f66e9be5fa0 R15: 0000000000000006
</TASK>
Fixes: ae155060247b ("mptcp: fix duplicate reset on fastclose")
Reported-by: syzbot+3a92d359bc2ec6255a33@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/69260882.a70a0220.d98e3.00b4.GAE@google.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251125195331.309558-1-kuniyu@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Propagate fwnode of the ACPI device to the SPI controller Linux device.
Currently only OF case propagates fwnode to the controller.
While at it, replace several calls to dev_fwnode() with a single one
cached in a local variable, and unify checks for fwnode type by using
is_*_node() APIs.
Fixes: 55ab8487e01d ("spi: spi-nxp-fspi: Add ACPI support")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Link: https://patch.msgid.link/20251126202501.2319679-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The LDO2 judgement bit position should be 7, not 6.
Cc: stable@vger.kernel.org
Reported-by: Yoon Dong Min <dm.youn@telechips.com>
Fixes: b65439d90150 ("regulator: rtq2208: Fix the LDO DVS capability")
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://patch.msgid.link/faadb009f84b88bfcabe39fc5009c7357b00bbe2.1764209258.git.cy_huang@richtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Correct buck group2 H and F mapping logic.
Cc: stable@vger.kernel.org
Reported-by: Yoon Dong Min <dm.youn@telechips.com>
Fixes: 1742e7e978ba ("regulator: rtq2208: Fix incorrect buck converter phase mapping")
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://patch.msgid.link/8527ae02a72b754d89b7580a5fe7474d6f80f5c3.1764209258.git.cy_huang@richtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Wei Fang says:
====================
net: fec: fix some PTP related issues
There are some issues which were introduced by the commit 350749b909bf
("net: fec: Add support for periodic output signal of PPS"). See each
patch for more details.
====================
Link: https://patch.msgid.link/20251125085210.1094306-1-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
There are currently two situations that can trigger the PTP interrupt,
one is the PPS event, the other is the PEROUT event. However, the irq
handler fec_pps_interrupt() does not check the irq event type and
directly registers a PPS event into the system, but the event may be
a PEROUT event. This is incorrect because PEROUT is an output signal,
while PPS is the input of the kernel PPS system. Therefore, add a check
for the event type, if pps_enable is true, it means that the current
event is a PPS event, and then the PPS event is registered.
Fixes: 350749b909bf ("net: fec: Add support for periodic output signal of PPS")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20251125085210.1094306-5-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In the current driver, PPS and PEROUT use the same channel to generate
the events, so they cannot be enabled at the same time. Otherwise, the
later configuration will overwrite the earlier configuration. Therefore,
when configuring PPS, the driver will check whether PEROUT is enabled.
Similarly, when configuring PEROUT, the driver will check whether PPS
is enabled.
Fixes: 350749b909bf ("net: fec: Add support for periodic output signal of PPS")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20251125085210.1094306-4-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
If the previously set PEROUT is already active, updating it will cause
the new PEROUT to start immediately instead of at the specified time.
This is because fep->reload_period is updated whithout check whether
the PEROUT is enabled, and the old PEROUT is not disabled. Therefore,
the pulse period will be updated immediately in the pulse interrupt
handler fec_pps_interrupt().
Currently, the driver does not support directly updating PEROUT and it
will make the logic be more complicated. To fix the current issue, add
a check before enabling the PEROUT, the driver will return an error if
PEROUT is enabled. If users wants to update a new PEROUT, they should
disable the old PEROUT first.
Fixes: 350749b909bf ("net: fec: Add support for periodic output signal of PPS")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20251125085210.1094306-3-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The PEROUT allows the user to set a specified future time to output the
periodic signal. If the future time is far from the current time, the FEC
driver will use hrtimer to configure PEROUT one second before the future
time. However, the hrtimer will not be canceled if the PEROUT is disabled
before the hrtimer expires. So the PEROUT will be configured when the
hrtimer expires, which is not as expected. Therefore, cancel the hrtimer
in fec_ptp_pps_disable() to fix this issue.
Fixes: 350749b909bf ("net: fec: Add support for periodic output signal of PPS")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20251125085210.1094306-2-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
On transmit, we are currently relying on skb->dev being set by
mctp_local_output() when we first set up the skb destination fields.
However, forwarded skbs do not use the local_output path, so will retain
their incoming netdev as their ->dev on tx. This does not work when
we're forwarding between interfaces.
Set skb->dev unconditionally in the transmit path, to allow for proper
forwarding.
We keep the skb->dev initialisation in mctp_local_output(), as we use it
for fragmentation.
Fixes: 269936db5eb3 ("net: mctp: separate routing database from routing operations")
Suggested-by: Vince Chang <vince_chang@aspeedtech.com>
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://patch.msgid.link/20251125-dev-forward-v1-1-54ecffcd0616@codeconstruct.com.au
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The len field originates from untrusted network packets. Boundary
checks have been added to prevent potential out-of-bounds writes when
decrypting the connection secret or processing service tickets.
[ idryomov: changelog ]
Cc: stable@vger.kernel.org
Signed-off-by: ziming zhang <ezrakiez@gmail.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
OSD indexes come from untrusted network packets. Boundary checks are
added to validate these against map->max_osd.
[ idryomov: drop BUG_ON in ceph_get_primary_affinity(), minor cosmetic
edits ]
Cc: stable@vger.kernel.org
Signed-off-by: ziming zhang <ezrakiez@gmail.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
The crash in process_v2_sparse_read() for fscrypt-encrypted directories
has been reported. Issue takes place for Ceph msgr2 protocol in secure
mode. It can be reproduced by the steps:
sudo mount -t ceph :/ /mnt/cephfs/ -o name=admin,fs=cephfs,ms_mode=secure
(1) mkdir /mnt/cephfs/fscrypt-test-3
(2) cp area_decrypted.tar /mnt/cephfs/fscrypt-test-3
(3) fscrypt encrypt --source=raw_key --key=./my.key /mnt/cephfs/fscrypt-test-3
(4) fscrypt lock /mnt/cephfs/fscrypt-test-3
(5) fscrypt unlock --key=my.key /mnt/cephfs/fscrypt-test-3
(6) cat /mnt/cephfs/fscrypt-test-3/area_decrypted.tar
(7) Issue has been triggered
[ 408.072247] ------------[ cut here ]------------
[ 408.072251] WARNING: CPU: 1 PID: 392 at net/ceph/messenger_v2.c:865
ceph_con_v2_try_read+0x4b39/0x72f0
[ 408.072267] Modules linked in: intel_rapl_msr intel_rapl_common
intel_uncore_frequency_common intel_pmc_core pmt_telemetry pmt_discovery
pmt_class intel_pmc_ssram_telemetry intel_vsec kvm_intel joydev kvm irqbypass
polyval_clmulni ghash_clmulni_intel aesni_intel rapl input_leds psmouse
serio_raw i2c_piix4 vga16fb bochs vgastate i2c_smbus floppy mac_hid qemu_fw_cfg
pata_acpi sch_fq_codel rbd msr parport_pc ppdev lp parport efi_pstore
[ 408.072304] CPU: 1 UID: 0 PID: 392 Comm: kworker/1:3 Not tainted 6.17.0-rc7+
[ 408.072307] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.17.0-5.fc42 04/01/2014
[ 408.072310] Workqueue: ceph-msgr ceph_con_workfn
[ 408.072314] RIP: 0010:ceph_con_v2_try_read+0x4b39/0x72f0
[ 408.072317] Code: c7 c1 20 f0 d4 ae 50 31 d2 48 c7 c6 60 27 d5 ae 48 c7 c7 f8
8e 6f b0 68 60 38 d5 ae e8 00 47 61 fe 48 83 c4 18 e9 ac fc ff ff <0f> 0b e9 06
fe ff ff 4c 8b 9d 98 fd ff ff 0f 84 64 e7 ff ff 89 85
[ 408.072319] RSP: 0018:ffff88811c3e7a30 EFLAGS: 00010246
[ 408.072322] RAX: ffffed1024874c6f RBX: ffffea00042c2b40 RCX: 0000000000000f38
[ 408.072324] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
[ 408.072325] RBP: ffff88811c3e7ca8 R08: 0000000000000000 R09: 00000000000000c8
[ 408.072326] R10: 00000000000000c8 R11: 0000000000000000 R12: 00000000000000c8
[ 408.072327] R13: dffffc0000000000 R14: ffff8881243a6030 R15: 0000000000003000
[ 408.072329] FS: 0000000000000000(0000) GS:ffff88823eadf000(0000)
knlGS:0000000000000000
[ 408.072331] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 408.072332] CR2: 000000c0003c6000 CR3: 000000010c106005 CR4: 0000000000772ef0
[ 408.072336] PKRU: 55555554
[ 408.072337] Call Trace:
[ 408.072338] <TASK>
[ 408.072340] ? sched_clock_noinstr+0x9/0x10
[ 408.072344] ? __pfx_ceph_con_v2_try_read+0x10/0x10
[ 408.072347] ? _raw_spin_unlock+0xe/0x40
[ 408.072349] ? finish_task_switch.isra.0+0x15d/0x830
[ 408.072353] ? __kasan_check_write+0x14/0x30
[ 408.072357] ? mutex_lock+0x84/0xe0
[ 408.072359] ? __pfx_mutex_lock+0x10/0x10
[ 408.072361] ceph_con_workfn+0x27e/0x10e0
[ 408.072364] ? metric_delayed_work+0x311/0x2c50
[ 408.072367] process_one_work+0x611/0xe20
[ 408.072371] ? __kasan_check_write+0x14/0x30
[ 408.072373] worker_thread+0x7e3/0x1580
[ 408.072375] ? __pfx__raw_spin_lock_irqsave+0x10/0x10
[ 408.072378] ? __pfx_worker_thread+0x10/0x10
[ 408.072381] kthread+0x381/0x7a0
[ 408.072383] ? __pfx__raw_spin_lock_irq+0x10/0x10
[ 408.072385] ? __pfx_kthread+0x10/0x10
[ 408.072387] ? __kasan_check_write+0x14/0x30
[ 408.072389] ? recalc_sigpending+0x160/0x220
[ 408.072392] ? _raw_spin_unlock_irq+0xe/0x50
[ 408.072394] ? calculate_sigpending+0x78/0xb0
[ 408.072395] ? __pfx_kthread+0x10/0x10
[ 408.072397] ret_from_fork+0x2b6/0x380
[ 408.072400] ? __pfx_kthread+0x10/0x10
[ 408.072402] ret_from_fork_asm+0x1a/0x30
[ 408.072406] </TASK>
[ 408.072407] ---[ end trace 0000000000000000 ]---
[ 408.072418] Oops: general protection fault, probably for non-canonical
address 0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI
[ 408.072984] KASAN: null-ptr-deref in range [0x0000000000000000-
0x0000000000000007]
[ 408.073350] CPU: 1 UID: 0 PID: 392 Comm: kworker/1:3 Tainted: G W
6.17.0-rc7+ #1 PREEMPT(voluntary)
[ 408.073886] Tainted: [W]=WARN
[ 408.074042] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.17.0-5.fc42 04/01/2014
[ 408.074468] Workqueue: ceph-msgr ceph_con_workfn
[ 408.074694] RIP: 0010:ceph_msg_data_advance+0x79/0x1a80
[ 408.074976] Code: fc ff df 49 8d 77 08 48 c1 ee 03 80 3c 16 00 0f 85 07 11 00
00 48 ba 00 00 00 00 00 fc ff df 49 8b 5f 08 48 89 de 48 c1 ee 03 <0f> b6 14 16
84 d2 74 09 80 fa 03 0f 8e 0f 0e 00 00 8b 13 83 fa 03
[ 408.075884] RSP: 0018:ffff88811c3e7990 EFLAGS: 00010246
[ 408.076305] RAX: ffff8881243a6388 RBX: 0000000000000000 RCX: 0000000000000000
[ 408.076909] RDX: dffffc0000000000 RSI: 0000000000000000 RDI: ffff8881243a6378
[ 408.077466] RBP: ffff88811c3e7a20 R08: 0000000000000000 R09: 00000000000000c8
[ 408.078034] R10: ffff8881243a6388 R11: 0000000000000000 R12: ffffed1024874c71
[ 408.078575] R13: dffffc0000000000 R14: ffff8881243a6030 R15: ffff8881243a6378
[ 408.079159] FS: 0000000000000000(0000) GS:ffff88823eadf000(0000)
knlGS:0000000000000000
[ 408.079736] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 408.080039] CR2: 000000c0003c6000 CR3: 000000010c106005 CR4: 0000000000772ef0
[ 408.080376] PKRU: 55555554
[ 408.080513] Call Trace:
[ 408.080630] <TASK>
[ 408.080729] ceph_con_v2_try_read+0x49b9/0x72f0
[ 408.081115] ? __pfx_ceph_con_v2_try_read+0x10/0x10
[ 408.081348] ? _raw_spin_unlock+0xe/0x40
[ 408.081538] ? finish_task_switch.isra.0+0x15d/0x830
[ 408.081768] ? __kasan_check_write+0x14/0x30
[ 408.081986] ? mutex_lock+0x84/0xe0
[ 408.082160] ? __pfx_mutex_lock+0x10/0x10
[ 408.082343] ceph_con_workfn+0x27e/0x10e0
[ 408.082529] ? metric_delayed_work+0x311/0x2c50
[ 408.082737] process_one_work+0x611/0xe20
[ 408.082948] ? __kasan_check_write+0x14/0x30
[ 408.083156] worker_thread+0x7e3/0x1580
[ 408.083331] ? __pfx__raw_spin_lock_irqsave+0x10/0x10
[ 408.083557] ? __pfx_worker_thread+0x10/0x10
[ 408.083751] kthread+0x381/0x7a0
[ 408.083922] ? __pfx__raw_spin_lock_irq+0x10/0x10
[ 408.084139] ? __pfx_kthread+0x10/0x10
[ 408.084310] ? __kasan_check_write+0x14/0x30
[ 408.084510] ? recalc_sigpending+0x160/0x220
[ 408.084708] ? _raw_spin_unlock_irq+0xe/0x50
[ 408.084917] ? calculate_sigpending+0x78/0xb0
[ 408.085138] ? __pfx_kthread+0x10/0x10
[ 408.085335] ret_from_fork+0x2b6/0x380
[ 408.085525] ? __pfx_kthread+0x10/0x10
[ 408.085720] ret_from_fork_asm+0x1a/0x30
[ 408.085922] </TASK>
[ 408.086036] Modules linked in: intel_rapl_msr intel_rapl_common
intel_uncore_frequency_common intel_pmc_core pmt_telemetry pmt_discovery
pmt_class intel_pmc_ssram_telemetry intel_vsec kvm_intel joydev kvm irqbypass
polyval_clmulni ghash_clmulni_intel aesni_intel rapl input_leds psmouse
serio_raw i2c_piix4 vga16fb bochs vgastate i2c_smbus floppy mac_hid qemu_fw_cfg
pata_acpi sch_fq_codel rbd msr parport_pc ppdev lp parport efi_pstore
[ 408.087778] ---[ end trace 0000000000000000 ]---
[ 408.088007] RIP: 0010:ceph_msg_data_advance+0x79/0x1a80
[ 408.088260] Code: fc ff df 49 8d 77 08 48 c1 ee 03 80 3c 16 00 0f 85 07 11 00
00 48 ba 00 00 00 00 00 fc ff df 49 8b 5f 08 48 89 de 48 c1 ee 03 <0f> b6 14 16
84 d2 74 09 80 fa 03 0f 8e 0f 0e 00 00 8b 13 83 fa 03
[ 408.089118] RSP: 0018:ffff88811c3e7990 EFLAGS: 00010246
[ 408.089357] RAX: ffff8881243a6388 RBX: 0000000000000000 RCX: 0000000000000000
[ 408.089678] RDX: dffffc0000000000 RSI: 0000000000000000 RDI: ffff8881243a6378
[ 408.090020] RBP: ffff88811c3e7a20 R08: 0000000000000000 R09: 00000000000000c8
[ 408.090360] R10: ffff8881243a6388 R11: 0000000000000000 R12: ffffed1024874c71
[ 408.090687] R13: dffffc0000000000 R14: ffff8881243a6030 R15: ffff8881243a6378
[ 408.091035] FS: 0000000000000000(0000) GS:ffff88823eadf000(0000)
knlGS:0000000000000000
[ 408.091452] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 408.092015] CR2: 000000c0003c6000 CR3: 000000010c106005 CR4: 0000000000772ef0
[ 408.092530] PKRU: 55555554
[ 417.112915]
==================================================================
[ 417.113491] BUG: KASAN: slab-use-after-free in
__mutex_lock.constprop.0+0x1522/0x1610
[ 417.114014] Read of size 4 at addr ffff888124870034 by task kworker/2:0/4951
[ 417.114587] CPU: 2 UID: 0 PID: 4951 Comm: kworker/2:0 Tainted: G D W
6.17.0-rc7+ #1 PREEMPT(voluntary)
[ 417.114592] Tainted: [D]=DIE, [W]=WARN
[ 417.114593] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.17.0-5.fc42 04/01/2014
[ 417.114596] Workqueue: events handle_timeout
[ 417.114601] Call Trace:
[ 417.114602] <TASK>
[ 417.114604] dump_stack_lvl+0x5c/0x90
[ 417.114610] print_report+0x171/0x4dc
[ 417.114613] ? __pfx__raw_spin_lock_irqsave+0x10/0x10
[ 417.114617] ? kasan_complete_mode_report_info+0x80/0x220
[ 417.114621] kasan_report+0xbd/0x100
[ 417.114625] ? __mutex_lock.constprop.0+0x1522/0x1610
[ 417.114628] ? __mutex_lock.constprop.0+0x1522/0x1610
[ 417.114630] __asan_report_load4_noabort+0x14/0x30
[ 417.114633] __mutex_lock.constprop.0+0x1522/0x1610
[ 417.114635] ? queue_con_delay+0x8d/0x200
[ 417.114638] ? __pfx___mutex_lock.constprop.0+0x10/0x10
[ 417.114641] ? __send_subscribe+0x529/0xb20
[ 417.114644] __mutex_lock_slowpath+0x13/0x20
[ 417.114646] mutex_lock+0xd4/0xe0
[ 417.114649] ? __pfx_mutex_lock+0x10/0x10
[ 417.114652] ? ceph_monc_renew_subs+0x2a/0x40
[ 417.114654] ceph_con_keepalive+0x22/0x110
[ 417.114656] handle_timeout+0x6b3/0x11d0
[ 417.114659] ? _raw_spin_unlock_irq+0xe/0x50
[ 417.114662] ? __pfx_handle_timeout+0x10/0x10
[ 417.114664] ? queue_delayed_work_on+0x8e/0xa0
[ 417.114669] process_one_work+0x611/0xe20
[ 417.114672] ? __kasan_check_write+0x14/0x30
[ 417.114676] worker_thread+0x7e3/0x1580
[ 417.114678] ? __pfx__raw_spin_lock_irqsave+0x10/0x10
[ 417.114682] ? __pfx_sched_setscheduler_nocheck+0x10/0x10
[ 417.114687] ? __pfx_worker_thread+0x10/0x10
[ 417.114689] kthread+0x381/0x7a0
[ 417.114692] ? __pfx__raw_spin_lock_irq+0x10/0x10
[ 417.114694] ? __pfx_kthread+0x10/0x10
[ 417.114697] ? __kasan_check_write+0x14/0x30
[ 417.114699] ? recalc_sigpending+0x160/0x220
[ 417.114703] ? _raw_spin_unlock_irq+0xe/0x50
[ 417.114705] ? calculate_sigpending+0x78/0xb0
[ 417.114707] ? __pfx_kthread+0x10/0x10
[ 417.114710] ret_from_fork+0x2b6/0x380
[ 417.114713] ? __pfx_kthread+0x10/0x10
[ 417.114715] ret_from_fork_asm+0x1a/0x30
[ 417.114720] </TASK>
[ 417.125171] Allocated by task 2:
[ 417.125333] kasan_save_stack+0x26/0x60
[ 417.125522] kasan_save_track+0x14/0x40
[ 417.125742] kasan_save_alloc_info+0x39/0x60
[ 417.125945] __kasan_slab_alloc+0x8b/0xb0
[ 417.126133] kmem_cache_alloc_node_noprof+0x13b/0x460
[ 417.126381] copy_process+0x320/0x6250
[ 417.126595] kernel_clone+0xb7/0x840
[ 417.126792] kernel_thread+0xd6/0x120
[ 417.126995] kthreadd+0x85c/0xbe0
[ 417.127176] ret_from_fork+0x2b6/0x380
[ 417.127378] ret_from_fork_asm+0x1a/0x30
[ 417.127692] Freed by task 0:
[ 417.127851] kasan_save_stack+0x26/0x60
[ 417.128057] kasan_save_track+0x14/0x40
[ 417.128267] kasan_save_free_info+0x3b/0x60
[ 417.128491] __kasan_slab_free+0x6c/0xa0
[ 417.128708] kmem_cache_free+0x182/0x550
[ 417.128906] free_task+0xeb/0x140
[ 417.129070] __put_task_struct+0x1d2/0x4f0
[ 417.129259] __put_task_struct_rcu_cb+0x15/0x20
[ 417.129480] rcu_do_batch+0x3d3/0xe70
[ 417.129681] rcu_core+0x549/0xb30
[ 417.129839] rcu_core_si+0xe/0x20
[ 417.130005] handle_softirqs+0x160/0x570
[ 417.130190] __irq_exit_rcu+0x189/0x1e0
[ 417.130369] irq_exit_rcu+0xe/0x20
[ 417.130531] sysvec_apic_timer_interrupt+0x9f/0xd0
[ 417.130768] asm_sysvec_apic_timer_interrupt+0x1b/0x20
[ 417.131082] Last potentially related work creation:
[ 417.131305] kasan_save_stack+0x26/0x60
[ 417.131484] kasan_record_aux_stack+0xae/0xd0
[ 417.131695] __call_rcu_common+0xcd/0x14b0
[ 417.131909] call_rcu+0x31/0x50
[ 417.132071] delayed_put_task_struct+0x128/0x190
[ 417.132295] rcu_do_batch+0x3d3/0xe70
[ 417.132478] rcu_core+0x549/0xb30
[ 417.132658] rcu_core_si+0xe/0x20
[ 417.132808] handle_softirqs+0x160/0x570
[ 417.132993] __irq_exit_rcu+0x189/0x1e0
[ 417.133181] irq_exit_rcu+0xe/0x20
[ 417.133353] sysvec_apic_timer_interrupt+0x9f/0xd0
[ 417.133584] asm_sysvec_apic_timer_interrupt+0x1b/0x20
[ 417.133921] Second to last potentially related work creation:
[ 417.134183] kasan_save_stack+0x26/0x60
[ 417.134362] kasan_record_aux_stack+0xae/0xd0
[ 417.134566] __call_rcu_common+0xcd/0x14b0
[ 417.134782] call_rcu+0x31/0x50
[ 417.134929] put_task_struct_rcu_user+0x58/0xb0
[ 417.135143] finish_task_switch.isra.0+0x5d3/0x830
[ 417.135366] __schedule+0xd30/0x5100
[ 417.135534] schedule_idle+0x5a/0x90
[ 417.135712] do_idle+0x25f/0x410
[ 417.135871] cpu_startup_entry+0x53/0x70
[ 417.136053] start_secondary+0x216/0x2c0
[ 417.136233] common_startup_64+0x13e/0x141
[ 417.136894] The buggy address belongs to the object at ffff888124870000
which belongs to the cache task_struct of size 10504
[ 417.138122] The buggy address is located 52 bytes inside of
freed 10504-byte region [ffff888124870000, ffff888124872908)
[ 417.139465] The buggy address belongs to the physical page:
[ 417.140016] page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0
pfn:0x124870
[ 417.140789] head: order:3 mapcount:0 entire_mapcount:0 nr_pages_mapped:0
pincount:0
[ 417.141519] memcg:ffff88811aa20e01
[ 417.141874] anon flags:
0x17ffffc0000040(head|node=0|zone=2|lastcpupid=0x1fffff)
[ 417.142600] page_type: f5(slab)
[ 417.142922] raw: 0017ffffc0000040 ffff88810094f040 0000000000000000
dead000000000001
[ 417.143554] raw: 0000000000000000 0000000000030003 00000000f5000000
ffff88811aa20e01
[ 417.143954] head: 0017ffffc0000040 ffff88810094f040 0000000000000000
dead000000000001
[ 417.144329] head: 0000000000000000 0000000000030003 00000000f5000000
ffff88811aa20e01
[ 417.144710] head: 0017ffffc0000003 ffffea0004921c01 00000000ffffffff
00000000ffffffff
[ 417.145106] head: ffffffffffffffff 0000000000000000 00000000ffffffff
0000000000000008
[ 417.145485] page dumped because: kasan: bad access detected
[ 417.145859] Memory state around the buggy address:
[ 417.146094] ffff88812486ff00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
fc
[ 417.146439] ffff88812486ff80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
fc
[ 417.146791] >ffff888124870000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb
fb
[ 417.147145] ^
[ 417.147387] ffff888124870080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
fb
[ 417.147751] ffff888124870100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
fb
[ 417.148123]
==================================================================
First of all, we have warning in get_bvec_at() because
cursor->total_resid contains zero value. And, finally,
we have crash in ceph_msg_data_advance() because
cursor->data is NULL. It means that get_bvec_at()
receives not initialized ceph_msg_data_cursor structure
because data is NULL and total_resid contains zero.
Moreover, we don't have likewise issue for the case of
Ceph msgr1 protocol because ceph_msg_data_cursor_init()
has been called before reading sparse data.
This patch adds calling of ceph_msg_data_cursor_init()
in the beginning of process_v2_sparse_read() with
the goal to guarantee that logic of reading sparse data
works correctly for the case of Ceph msgr2 protocol.
Cc: stable@vger.kernel.org
Link: https://tracker.ceph.com/issues/73152
Signed-off-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
