summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
5 daysLinux 6.18.19v6.18.19Greg Kroah-Hartman1-1/+1
Link: https://lore.kernel.org/r/20260317162959.345812316@linuxfoundation.org Tested-by: Peter Schneider <pschneider1968@googlemail.com> Tested-by: Miguel Ojeda <ojeda@kernel.org> Tested-by: Jeffrin Jose T <jeffrin@rajagiritech.edu.in> Tested-by: Shung-Hsi Yu <shung-hsi.yu@suse.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Ron Economos <re@w6rz.net> Link: https://lore.kernel.org/r/20260318122621.714862892@linuxfoundation.org Tested-by: Brett A C Sheffield <bacs@librecast.net> Tested-by: Peter Schneider <pschneider1968@googlemail.com> Tested-by: Pavel Machek (CIP) <pavel@nabladev.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Ron Economos <re@w6rz.net> Tested-by: Wentao Guan <guanwentao@uniontech.com> Tested-by: Barry K. Nathan <barryn@pobox.com> Tested-by: Mark Brown <brooniekernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 daysbpf: drop kthread_exit from noreturn_denyChristian Loehle1-1/+0
commit 7fe44c4388146bdbb3c5932d81a26d9fa0fd3ec9 upstream. kthread_exit became a macro to do_exit in commit 28aaa9c39945 ("kthread: consolidate kthread exit paths to prevent use-after-free"), so there is no kthread_exit function BTF ID to resolve. Remove it from noreturn_deny to avoid resolve_btfids unresolved symbol warnings. Signed-off-by: Christian Loehle <christian.loehle@arm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 daysdrm/bridge: ti-sn65dsi86: Add support for DisplayPort mode with HPDJohn Ripple1-0/+112
commit 9133bc3f0564890218cbba6cc7e81ebc0841a6f1 upstream. Add support for DisplayPort to the bridge, which entails the following: - Get and use an interrupt for HPD; - Properly clear all status bits in the interrupt handler; Signed-off-by: John Ripple <john.ripple@keysight.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20250915174543.2564994-1-john.ripple@keysight.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 daysmm/damon/core: disallow non-power of two min_region_szSeongJae Park1-0/+3
[ Upstream commit c80f46ac228b48403866d65391ad09bdf0e8562a ] DAMON core uses min_region_sz parameter value as the DAMON region alignment. The alignment is made using ALIGN() and ALIGN_DOWN(), which support only the power of two alignments. But DAMON core API callers can set min_region_sz to an arbitrary number. Users can also set it indirectly, using addr_unit. When the alignment is not properly set, DAMON behavior becomes difficult to expect and understand, makes it effectively broken. It doesn't cause a kernel crash-like significant issue, though. Fix the issue by disallowing min_region_sz input that is not a power of two. Add the check to damon_commit_ctx(), as all DAMON API callers who set min_region_sz uses the function. This can be a sort of behavioral change, but it does not break users, for the following reasons. As the symptom is making DAMON effectively broken, it is not reasonable to believe there are real use cases of non-power of two min_region_sz. There is no known use case or issue reports from the setup, either. In future, if we find real use cases of non-power of two alignments and we can support it with low enough overhead, we can consider moving the restriction. But, for now, simply disallowing the corner case should be good enough as a hot fix. Link: https://lkml.kernel.org/r/20260214214124.87689-1-sj@kernel.org Fixes: d8f867fa0825 ("mm/damon: add damon_ctx->min_sz_region") Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Quanmin Yan <yanquanmin1@huawei.com> Cc: <stable@vger.kernel.org> [6.18+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> [ min_region_sz => min_sz_region ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 daysio_uring/eventfd: use ctx->rings_rcu for flags checkingJens Axboe1-3/+7
Commit 177c69432161f6e4bab07ccacf8a1748a6898a6b upstream. Similarly to what commit e78f7b70e837 did for local task work additions, use ->rings_rcu under RCU rather than dereference ->rings directly. See that commit for more details. Cc: stable@vger.kernel.org Fixes: 79cfe9e59c2a ("io_uring/register: add IORING_REGISTER_RESIZE_RINGS") Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 daysio_uring: ensure ctx->rings is stable for task work flags manipulationJens Axboe3-3/+34
Commit 96189080265e6bb5dde3a4afbaf947af493e3f82 upstream. If DEFER_TASKRUN | SETUP_TASKRUN is used and task work is added while the ring is being resized, it's possible for the OR'ing of IORING_SQ_TASKRUN to happen in the small window of swapping into the new rings and the old rings being freed. Prevent this by adding a 2nd ->rings pointer, ->rings_rcu, which is protected by RCU. The task work flags manipulation is inside RCU already, and if the resize ring freeing is done post an RCU synchronize, then there's no need to add locking to the fast path of task work additions. Note: this is only done for DEFER_TASKRUN, as that's the only setup mode that supports ring resizing. If this ever changes, then they too need to use the io_ctx_mark_taskrun() helper. Link: https://lore.kernel.org/io-uring/20260309062759.482210-1-naup96721@gmail.com/ Cc: stable@vger.kernel.org Fixes: 79cfe9e59c2a ("io_uring/register: add IORING_REGISTER_RESIZE_RINGS") Reported-by: Hao-Yu Yang <naup96721@gmail.com> Suggested-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 daysnet/tcp-md5: Fix MAC comparison to be constant-timeEric Biggers3-3/+6
commit 46d0d6f50dab706637f4c18a470aac20a21900d3 upstream. To prevent timing attacks, MACs need to be compared in constant time. Use the appropriate helper function for this. Fixes: cfb6eeb4c860 ("[TCP]: MD5 Signature Option (RFC2385) support.") Fixes: 658ddaaf6694 ("tcp: md5: RST: getting md5 key from listener") Cc: stable@vger.kernel.org Signed-off-by: Eric Biggers <ebiggers@kernel.org> Link: https://patch.msgid.link/20260302203409.13388-1-ebiggers@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 dayslib/crypto: tests: Depend on library options rather than selecting themEric Biggers1-13/+7
commit 4478e8eeb87120c11e90041864c2233238b2155a upstream. The convention for KUnit tests is to have the test kconfig options visible only when the code they depend on is already enabled. This way only the tests that are relevant to the particular kernel build can be enabled, either manually or via KUNIT_ALL_TESTS. Update lib/crypto/tests/Kconfig to follow that convention, i.e. depend on the corresponding library options rather than selecting them. This fixes an issue where enabling KUNIT_ALL_TESTS enabled non-test code. This does mean that it becomes a bit more difficult to enable *all* the crypto library tests (which is what I do as a maintainer of the code), since doing so will now require enabling other options that select the libraries. Regardless, we should follow the standard KUnit convention. I'll also add a .kunitconfig file that does enable all these options. Note: currently most of the crypto library options are selected by visible options in crypto/Kconfig, which can be used to enable them without too much trouble. If in the future we end up with more cases like CRYPTO_LIB_CURVE25519 which is selected only by WIREGUARD (thus making CRYPTO_LIB_CURVE25519_KUNIT_TEST effectively depend on WIREGUARD after this commit), we could consider adding a new kconfig option that enables all the library code specifically for testing. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Closes: https://lore.kernel.org/r/CAMuHMdULzMdxuTVfg8_4jdgzbzjfx-PHkcgbGSthcUx_sHRNMg@mail.gmail.com Fixes: 4dcf6caddaa0 ("lib/crypto: tests: Add KUnit tests for SHA-224 and SHA-256") Fixes: 571eaeddb67d ("lib/crypto: tests: Add KUnit tests for SHA-384 and SHA-512") Fixes: 6dd4d9f7919e ("lib/crypto: tests: Add KUnit tests for Poly1305") Fixes: 66b130607908 ("lib/crypto: tests: Add KUnit tests for SHA-1 and HMAC-SHA1") Fixes: d6b6aac0cdb4 ("lib/crypto: tests: Add KUnit tests for MD5 and HMAC-MD5") Fixes: afc4e4a5f122 ("lib/crypto: tests: Migrate Curve25519 self-test to KUnit") Fixes: 6401fd334ddf ("lib/crypto: tests: Add KUnit tests for BLAKE2b") Fixes: 15c64c47e484 ("lib/crypto: tests: Add SHA3 kunit tests") Fixes: b3aed551b3fc ("lib/crypto: tests: Add KUnit tests for POLYVAL") Fixes: ed894faccb8d ("lib/crypto: tests: Add KUnit tests for ML-DSA verification") Fixes: 7246fe6cd644 ("lib/crypto: tests: Add KUnit tests for NH") Cc: stable@vger.kernel.org Reviewed-by: David Gow <david@davidgow.net> Acked-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/20260226191749.39397-1-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 daysksmbd: Compare MACs in constant timeEric Biggers3-3/+7
commit c5794709bc9105935dbedef8b9cf9c06f2b559fa upstream. To prevent timing attacks, MAC comparisons need to be constant-time. Replace the memcmp() with the correct function, crypto_memneq(). Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3") Cc: stable@vger.kernel.org Signed-off-by: Eric Biggers <ebiggers@kernel.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 dayssmb: client: Compare MACs in constant timeEric Biggers2-2/+5
commit 26bc83b88bbbf054f0980a4a42047a8d1e210e4c upstream. To prevent timing attacks, MAC comparisons need to be constant-time. Replace the memcmp() with the correct function, crypto_memneq(). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.org> Signed-off-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 dayskbuild: Leave objtool binary around with 'make clean'Nathan Chancellor2-7/+9
[ Upstream commit fdb12c8a24a453bdd6759979b6ef1e04ebd4beb4 ] The difference between 'make clean' and 'make mrproper' is documented in 'make help' as: clean - Remove most generated files but keep the config and enough build support to build external modules mrproper - Remove all generated files + config + various backup files After commit 68b4fe32d737 ("kbuild: Add objtool to top-level clean target"), running 'make clean' then attempting to build an external module with the resulting build directory fails with $ make ARCH=x86_64 O=build clean $ make -C build M=... MO=... ... /bin/sh: line 1: .../build/tools/objtool/objtool: No such file or directory as 'make clean' removes the objtool binary. Split the objtool clean target into mrproper and clean like Kbuild does and remove all generated artifacts with 'make clean' except for the objtool binary, which is removed with 'make mrproper'. To avoid a small race when running the objtool clean target through both objtool_mrproper and objtool_clean when running 'make mrproper', modify objtool's clean up find command to avoid using find's '-delete' command by piping the files into 'xargs rm -f' like the rest of Kbuild does. Cc: stable@vger.kernel.org Fixes: 68b4fe32d737 ("kbuild: Add objtool to top-level clean target") Reported-by: Michal Suchanek <msuchanek@suse.de> Closes: https://lore.kernel.org/20260225112633.6123-1-msuchanek@suse.de/ Reported-by: Rainer Fiebig <jrf@mailbox.org> Closes: https://lore.kernel.org/62d12399-76e5-3d40-126a-7490b4795b17@mailbox.org/ Acked-by: Josh Poimboeuf <jpoimboe@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Nicolas Schier <nsc@kernel.org> Tested-by: Nicolas Schier <nsc@kernel.org> Link: https://patch.msgid.link/20260227-avoid-objtool-binary-removal-clean-v1-1-122f3e55eae9@kernel.org Signed-off-by: Nathan Chancellor <nathan@kernel.org> [ Context ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 daysKVM: SVM: Set/clear CR8 write interception when AVIC is (de)activatedSean Christopherson2-5/+9
[ Upstream commit 87d0f901a9bd8ae6be57249c737f20ac0cace93d ] Explicitly set/clear CR8 write interception when AVIC is (de)activated to fix a bug where KVM leaves the interception enabled after AVIC is activated. E.g. if KVM emulates INIT=>WFS while AVIC is deactivated, CR8 will remain intercepted in perpetuity. On its own, the dangling CR8 intercept is "just" a performance issue, but combined with the TPR sync bug fixed by commit d02e48830e3f ("KVM: SVM: Sync TPR from LAPIC into VMCB::V_TPR even if AVIC is active"), the danging intercept is fatal to Windows guests as the TPR seen by hardware gets wildly out of sync with reality. Note, VMX isn't affected by the bug as TPR_THRESHOLD is explicitly ignored when Virtual Interrupt Delivery is enabled, i.e. when APICv is active in KVM's world. I.e. there's no need to trigger update_cr8_intercept(), this is firmly an SVM implementation flaw/detail. WARN if KVM gets a CR8 write #VMEXIT while AVIC is active, as KVM should never enter the guest with AVIC enabled and CR8 writes intercepted. Fixes: 3bbf3565f48c ("svm: Do not intercept CR8 when enable AVIC") Cc: stable@vger.kernel.org Cc: Jim Mattson <jmattson@google.com> Cc: Naveen N Rao (AMD) <naveen@kernel.org> Cc: Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Reviewed-by: Naveen N Rao (AMD) <naveen@kernel.org> Reviewed-by: Jim Mattson <jmattson@google.com> Link: https://patch.msgid.link/20260203190711.458413-3-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> [Squash fix to avic_deactivate_vmcb. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 daysKVM: SVM: Add a helper to look up the max physical ID for AVICNaveen N Rao1-6/+20
[ Upstream commit f2f6e67a56dc88fea7e9b10c4e79bb01d97386b7 ] To help with a future change, add a helper to look up the maximum physical ID depending on the vCPU AVIC mode. No functional change intended. Suggested-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Naveen N Rao (AMD) <naveen@kernel.org> Link: https://lore.kernel.org/r/0ab9bf5e20a3463a4aa3a5ea9bbbac66beedf1d1.1757009416.git.naveen@kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com> Stable-dep-of: 87d0f901a9bd ("KVM: SVM: Set/clear CR8 write interception when AVIC is (de)activated") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 daysKVM: SVM: Limit AVIC physical max index based on configured max_vcpu_idsNaveen N Rao1-2/+5
[ Upstream commit 574ef752d4aea04134bc121294d717f4422c2755 ] KVM allows VMMs to specify the maximum possible APIC ID for a virtual machine through KVM_CAP_MAX_VCPU_ID capability so as to limit data structures related to APIC/x2APIC. Utilize the same to set the AVIC physical max index in the VMCB, similar to VMX. This helps hardware limit the number of entries to be scanned in the physical APIC ID table speeding up IPI broadcasts for virtual machines with smaller number of vCPUs. Unlike VMX, SVM AVIC requires a single page to be allocated for the Physical APIC ID table and the Logical APIC ID table, so retain the existing approach of allocating those during VM init. Signed-off-by: Naveen N Rao (AMD) <naveen@kernel.org> Link: https://lore.kernel.org/r/adb07ccdb3394cd79cb372ba6bcc69a4e4d4ef54.1757009416.git.naveen@kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com> Stable-dep-of: 87d0f901a9bd ("KVM: SVM: Set/clear CR8 write interception when AVIC is (de)activated") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 daysKVM: arm64: Eagerly init vgic dist/redist on vgic creationMarc Zyngier1-16/+16
[ Upstream commit ac6769c8f948dff33265c50e524aebf9aa6f1be0 ] If vgic_allocate_private_irqs_locked() fails for any odd reason, we exit kvm_vgic_create() early, leaving dist->rd_regions uninitialised. kvm_vgic_dist_destroy() then comes along and walks into the weeds trying to free the RDs. Got to love this stuff. Solve it by moving all the static initialisation early, and make sure that if we fail halfway, we're in a reasonable shape to perform the rest of the teardown. While at it, reset the vgic model on failure, just in case... Reported-by: syzbot+f6a46b038fc243ac0175@syzkaller.appspotmail.com Tested-by: syzbot+f6a46b038fc243ac0175@syzkaller.appspotmail.com Fixes: b3aa9283c0c50 ("KVM: arm64: vgic: Hoist SGI/PPI alloc from vgic_init() to kvm_create_vgic()") Link: https://lore.kernel.org/r/69a2d58c.050a0220.3a55be.003b.GAE@google.com Link: https://patch.msgid.link/20260228164559.936268-1-maz@kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 daysKVM: arm64: gic: Set vgic_model before initing private IRQsSascha Bischoff1-4/+4
[ Upstream commit 9435c1e1431003e23aa34ef8e46c30d09c3dbcb5 ] Different GIC types require the private IRQs to be initialised differently. GICv5 is the culprit as it supports both a different number of private IRQs, and all of these are PPIs (there are no SGIs). Moreover, as GICv5 uses the top bits of the interrupt ID to encode the type, the intid also needs to computed differently. Up until now, the GIC model has been set after initialising the private IRQs for a VCPU. Move this earlier to ensure that the GIC model is available when configuring the private IRQs. While we're at it, also move the setting of the in_kernel flag and implementation revision to keep them grouped together as before. Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com> Link: https://patch.msgid.link/20260128175919.3828384-7-sascha.bischoff@arm.com Signed-off-by: Marc Zyngier <maz@kernel.org> Stable-dep-of: ac6769c8f948 ("KVM: arm64: Eagerly init vgic dist/redist on vgic creation") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 daysmmc: dw_mmc-rockchip: Fix runtime PM support for internal phase supportShawn Lin1-1/+37
[ Upstream commit 6465a8bbb0f6ad98aeb66dc9ea19c32c193a610b ] RK3576 is the first platform to introduce internal phase support, and subsequent platforms are expected to adopt a similar design. In this architecture, runtime suspend powers off the attached power domain, which resets registers, including vendor-specific ones such as SDMMC_TIMING_CON0, SDMMC_TIMING_CON1, and SDMMC_MISC_CON. These registers must be saved and restored, a requirement that falls outside the scope of the dw_mmc core. Fixes: 59903441f5e4 ("mmc: dw_mmc-rockchip: Add internal phase support") Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Tested-by: Marco Schirrmeister <mschirrmeister@gmail.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 daysmmc: dw_mmc-rockchip: Add memory clock auto-gating supportShawn Lin1-0/+6
[ Upstream commit ff6f0286c896f062853552097220dd93961be9c4 ] Per design recommendations, the memory clock can be gated when there is no in-flight transfer, which helps save power. This feature is introduced alongside internal phase support, and this patch enables it. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Stable-dep-of: 6465a8bbb0f6 ("mmc: dw_mmc-rockchip: Fix runtime PM support for internal phase support") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 daysdrm/gud: fix NULL crtc dereference on display disableShenghao Yang3-19/+48
[ Upstream commit 7149be786da012afc6bae293d38f8c1fff1fb90d ] gud_plane_atomic_update() currently handles both crtc state and framebuffer updates - the complexity has led to a few accidental NULL pointer dereferences. Commit dc2d5ddb193e ("drm/gud: fix NULL fb and crtc dereferences on USB disconnect") [1] fixed an earlier dereference but planes can also be disabled in non-hotplug paths (e.g. display disables via the desktop environment). The drm_dev_enter() call would not cause an early return in those and subsequently oops on dereferencing crtc: BUG: kernel NULL pointer dereference, address: 00000000000005c8 CPU: 6 UID: 1000 PID: 3473 Comm: kwin_wayland Not tainted 6.18.2-200.vanilla.gud.fc42.x86_64 #1 PREEMPT(lazy) RIP: 0010:gud_plane_atomic_update+0x148/0x470 [gud] <TASK> drm_atomic_helper_commit_planes+0x28e/0x310 drm_atomic_helper_commit_tail+0x2a/0x70 commit_tail+0xf1/0x150 drm_atomic_helper_commit+0x13c/0x180 drm_atomic_commit+0xb1/0xe0 info ? __pfx___drm_printfn_info+0x10/0x10 drm_mode_atomic_ioctl+0x70f/0x7c0 ? __pfx_drm_mode_atomic_ioctl+0x10/0x10 drm_ioctl_kernel+0xae/0x100 drm_ioctl+0x2a8/0x550 ? __pfx_drm_mode_atomic_ioctl+0x10/0x10 __x64_sys_ioctl+0x97/0xe0 do_syscall_64+0x7e/0x7f0 ? __ct_user_enter+0x56/0xd0 ? do_syscall_64+0x158/0x7f0 ? __ct_user_enter+0x56/0xd0 ? do_syscall_64+0x158/0x7f0 entry_SYSCALL_64_after_hwframe+0x76/0x7e Split out crtc handling from gud_plane_atomic_update() into atomic_enable() and atomic_disable() functions to delegate crtc state transitioning work to the DRM helpers. To preserve the gud state commit sequence [2], switch to the runtime PM version of drm_atomic_helper_commit_tail() which ensures that crtcs are enabled (hence sending the GUD_REQ_SET_CONTROLLER_ENABLE and GUD_REQ_SET_DISPLAY_ENABLE requests) before a framebuffer update is sent. [1] https://lore.kernel.org/all/20251231055039.44266-1-me@shenghaoyang.info/ [2] https://github.com/notro/gud/wiki/GUD-Protocol#display-state Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/r/202601142159.0v8ilfVs-lkp@intel.com/ Fixes: 73cfd166e045 ("drm/gud: Replace simple display pipe with DRM atomic helpers") Cc: <stable@vger.kernel.org> # 6.19.x Cc: <stable@vger.kernel.org> # 6.18.x Signed-off-by: Shenghao Yang <me@shenghaoyang.info> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Ruben Wauters <rubenru09@aol.com> Signed-off-by: Ruben Wauters <rubenru09@aol.com> Link: https://patch.msgid.link/20260222054551.80864-1-me@shenghaoyang.info Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 daysdrm/gud: rearrange gud_probe() to prepare for function splittingRuben Wauters1-21/+24
[ Upstream commit b9e5e9d2c187b849e050d59823e8c834f78475ab ] gud_probe() is currently very large and does many things, including pipeline setup and feature detection, as well as having USB functions. This patch re-orders the code in gud_probe() to make it more organised and easier to split apart in the future. Signed-off-by: Ruben Wauters <rubenru09@aol.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://lore.kernel.org/r/20251020140147.5017-1-rubenru09@aol.com/ Stable-dep-of: 7149be786da0 ("drm/gud: fix NULL crtc dereference on display disable") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 daysmm: Fix a hmm_range_fault() livelock / starvation problemThomas Hellström3-5/+19
commit b570f37a2ce480be26c665345c5514686a8a0274 upstream. If hmm_range_fault() fails a folio_trylock() in do_swap_page, trying to acquire the lock of a device-private folio for migration, to ram, the function will spin until it succeeds grabbing the lock. However, if the process holding the lock is depending on a work item to be completed, which is scheduled on the same CPU as the spinning hmm_range_fault(), that work item might be starved and we end up in a livelock / starvation situation which is never resolved. This can happen, for example if the process holding the device-private folio lock is stuck in migrate_device_unmap()->lru_add_drain_all() sinc lru_add_drain_all() requires a short work-item to be run on all online cpus to complete. A prerequisite for this to happen is: a) Both zone device and system memory folios are considered in migrate_device_unmap(), so that there is a reason to call lru_add_drain_all() for a system memory folio while a folio lock is held on a zone device folio. b) The zone device folio has an initial mapcount > 1 which causes at least one migration PTE entry insertion to be deferred to try_to_migrate(), which can happen after the call to lru_add_drain_all(). c) No or voluntary only preemption. This all seems pretty unlikely to happen, but indeed is hit by the "xe_exec_system_allocator" igt test. Resolve this by waiting for the folio to be unlocked if the folio_trylock() fails in do_swap_page(). Rename migration_entry_wait_on_locked() to softleaf_entry_wait_unlock() and update its documentation to indicate the new use-case. Future code improvements might consider moving the lru_add_drain_all() call in migrate_device_unmap() to be called *after* all pages have migration entries inserted. That would eliminate also b) above. v2: - Instead of a cond_resched() in hmm_range_fault(), eliminate the problem by waiting for the folio to be unlocked in do_swap_page() (Alistair Popple, Andrew Morton) v3: - Add a stub migration_entry_wait_on_locked() for the !CONFIG_MIGRATION case. (Kernel Test Robot) v4: - Rename migrate_entry_wait_on_locked() to softleaf_entry_wait_on_locked() and update docs (Alistair Popple) v5: - Add a WARN_ON_ONCE() for the !CONFIG_MIGRATION version of softleaf_entry_wait_on_locked(). - Modify wording around function names in the commit message (Andrew Morton) Suggested-by: Alistair Popple <apopple@nvidia.com> Fixes: 1afaeb8293c9 ("mm/migrate: Trylock device page in do_swap_page") Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Leon Romanovsky <leon@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Matthew Brost <matthew.brost@intel.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: linux-mm@kvack.org Cc: <dri-devel@lists.freedesktop.org> Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: <stable@vger.kernel.org> # v6.15+ Reviewed-by: John Hubbard <jhubbard@nvidia.com> #v3 Reviewed-by: Alistair Popple <apopple@nvidia.com> Link: https://patch.msgid.link/20260210115653.92413-1-thomas.hellstrom@linux.intel.com (cherry picked from commit a69d1ab971a624c6f112cea61536569d579c3215) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 dayscxl/acpi: Fix CXL_ACPI and CXL_PMEM Kconfig tristate mismatchKeith Busch1-0/+1
commit 93d0fcdddc9e7be9d4f42acbe57bc90dbb0fe75d upstream. Commit e7e222ad73d9 ("cxl: Move devm_cxl_add_nvdimm_bridge() to cxl_pmem.ko") moves devm_cxl_add_nvdimm_bridge() into the cxl_pmem file, which has independent config compile options for built-in or module. The call from cxl_acpi_probe() is guarded by IS_ENABLED(CONFIG_CXL_PMEM), which evaluates to true for both =y and =m. When CONFIG_CXL_PMEM=m, a built-in cxl_acpi attempts to reference a symbol exported by a module, which fails to link. CXL_PMEM cannot simply be promoted to =y in this configuration because it depends on LIBNVDIMM, which may itself be =m. Add a Kconfig dependency to prevent CXL_ACPI from being built-in when CXL_PMEM is a module. This contrains CXL_ACPI to =m when CXL_PMEM=m, while still allowing CXL_ACPI to be freely configured when CXL_PMEM is either built-in or disabled. [ dj: Fix up commit reference formatting. ] Fixes: e7e222ad73d9 ("cxl: Move devm_cxl_add_nvdimm_bridge() to cxl_pmem.ko") Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Link: https://patch.msgid.link/20260305204057.1516948-1-kbusch@meta.com Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 daysi3c: mipi-i3c-hci: Correct RING_CTRL_ABORT handling in DMA dequeueAdrian Hunter1-9/+16
commit b795e68bf3073d67bebbb5a44d93f49efc5b8cc7 upstream. The logic used to abort the DMA ring contains several flaws: 1. The driver unconditionally issues a ring abort even when the ring has already stopped. 2. The completion used to wait for abort completion is never re-initialized, resulting in incorrect wait behavior. 3. The abort sequence unintentionally clears RING_CTRL_ENABLE, which resets hardware ring pointers and disrupts the controller state. 4. If the ring is already stopped, the abort operation should be considered successful without attempting further action. Fix the abort handling by checking whether the ring is running before issuing an abort, re-initializing the completion when needed, ensuring that RING_CTRL_ENABLE remains asserted during abort, and treating an already stopped ring as a successful condition. Fixes: 9ad9a52cce282 ("i3c/master: introduce the mipi-i3c-hci driver") Cc: stable@vger.kernel.org Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Link: https://patch.msgid.link/20260306072451.11131-9-adrian.hunter@intel.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 daysi3c: mipi-i3c-hci: Fix race in DMA ring dequeueAdrian Hunter3-0/+4
commit 1dca8aee80eea76d2aae21265de5dd64f6ba0f09 upstream. The HCI DMA dequeue path (hci_dma_dequeue_xfer()) may be invoked for multiple transfers that timeout around the same time. However, the function is not serialized and can race with itself. When a timeout occurs, hci_dma_dequeue_xfer() stops the ring, processes incomplete transfers, and then restarts the ring. If another timeout triggers a parallel call into the same function, the two instances may interfere with each other - stopping or restarting the ring at unexpected times. Add a mutex so that hci_dma_dequeue_xfer() is serialized with respect to itself. Fixes: 9ad9a52cce282 ("i3c/master: introduce the mipi-i3c-hci driver") Cc: stable@vger.kernel.org Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Link: https://patch.msgid.link/20260306072451.11131-7-adrian.hunter@intel.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 daysi3c: mipi-i3c-hci: Add missing TID field to no-op command descriptorAdrian Hunter2-1/+2
commit ec3cfd835f7c4bbd23bc9ad909d2fdc772a578bb upstream. The internal control command descriptor used for no-op commands includes a Transaction ID (TID) field, but the no-op command constructed in hci_dma_dequeue_xfer() omitted it. As a result, the hardware receives a no-op descriptor without the expected TID. This bug has gone unnoticed because the TID is currently not validated in the no-op completion path, but the descriptor format requires it to be present. Add the missing TID field when generating a no-op descriptor so that its layout matches the defined command structure. Fixes: 9ad9a52cce282 ("i3c/master: introduce the mipi-i3c-hci driver") Cc: stable@vger.kernel.org Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Link: https://patch.msgid.link/20260306072451.11131-10-adrian.hunter@intel.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 daysi3c: mipi-i3c-hci: Restart DMA ring correctly after dequeue abortAdrian Hunter1-0/+2
commit b6d586431ae20d5157ee468d0ef62ad26798ef13 upstream. The DMA dequeue path attempts to restart the ring after aborting an in-flight transfer, but the current sequence is incomplete. The controller must be brought out of the aborted state and the ring control registers must be programmed in the correct order: first clearing ABORT, then re-enabling the ring and asserting RUN_STOP to resume operation. Add the missing controller resume step and update the ring control writes so that the ring is restarted using the proper sequence. Fixes: 9ad9a52cce282 ("i3c/master: introduce the mipi-i3c-hci driver") Cc: stable@vger.kernel.org Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Link: https://patch.msgid.link/20260306072451.11131-11-adrian.hunter@intel.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 daysi3c: mipi-i3c-hci: Consolidate spinlocksAdrian Hunter4-17/+16
commit fa12bb903bc3ed1826e355d267fe134bde95e23c upstream. The MIPI I3C HCI driver currently uses separate spinlocks for different contexts (PIO vs. DMA rings). This split is unnecessary and complicates upcoming fixes. The driver does not support concurrent PIO and DMA operation, and it only supports a single DMA ring, so a single lock is sufficient for all paths. Introduce a unified spinlock in struct i3c_hci, switch both PIO and DMA code to use it, and remove the per-context locks. No functional change is intended in this patch. Fixes: 9ad9a52cce282 ("i3c/master: introduce the mipi-i3c-hci driver") Cc: stable@vger.kernel.org Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Link: https://patch.msgid.link/20260306072451.11131-5-adrian.hunter@intel.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 daysi3c: mipi-i3c-hci: Factor out DMA mapping from queuing pathAdrian Hunter1-16/+33
commit f3bcbfe1b8b0b836b772927f75f8cb6e759eb00a upstream. Prepare for fixing a race in the DMA ring enqueue path when handling parallel transfers. Move all DMA mapping out of hci_dma_queue_xfer() and into a new helper that performs the mapping up front. This refactoring allows the upcoming fix to extend the spinlock coverage around the enqueue operation without performing DMA mapping under the spinlock. No functional change is intended in this patch. Fixes: 9ad9a52cce282 ("i3c/master: introduce the mipi-i3c-hci driver") Cc: stable@vger.kernel.org Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Link: https://patch.msgid.link/20260306072451.11131-4-adrian.hunter@intel.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 daysi3c: mipi-i3c-hci: Use ETIMEDOUT instead of ETIME for timeout errorsAdrian Hunter3-5/+5
commit 4167b8914463132654e01e16259847d097f8a7f7 upstream. The MIPI I3C HCI driver currently returns -ETIME for various timeout conditions, while other I3C master drivers consistently use -ETIMEDOUT for the same class of errors. Align the HCI driver with the rest of the subsystem by replacing all uses of -ETIME with -ETIMEDOUT. Fixes: 9ad9a52cce282 ("i3c/master: introduce the mipi-i3c-hci driver") Cc: stable@vger.kernel.org Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Link: https://patch.msgid.link/20260306072451.11131-2-adrian.hunter@intel.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 daysiio: proximity: hx9023s: Protect against division by zero in set_samp_freqYasin Lee1-0/+3
commit a318cfc0853706f1d6ce682dba660bc455d674ef upstream. Avoid division by zero when sampling frequency is unspecified. Fixes: 60df548277b7 ("iio: proximity: Add driver support for TYHX's HX9023S capacitive proximity sensor") Signed-off-by: Yasin Lee <yasin.lee.x@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 daysiio: proximity: hx9023s: fix assignment order for __counted_byYasin Lee1-2/+1
commit 585b90c0161ab77416fe3acdbdc55b978e33e16c upstream. Initialize fw_size before copying firmware data into the flexible array member to match the __counted_by() annotation. This fixes the incorrect assignment order that triggers runtime safety checks. Fixes: e9ed97be4fcc ("iio: proximity: hx9023s: Added firmware file parsing functionality") Signed-off-by: Yasin Lee <yasin.lee.x@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 daysiio: imu: inv_icm42600: fix odr switch when turning buffer offJean-Baptiste Maneyrol1-0/+4
commit ffd32db8263d2d785a2c419486a450dc80693235 upstream. ODR switch is done in 2 steps when FIFO is on : change the ODR register value and acknowledge change when reading the FIFO ODR change flag. When we are switching odr and turning buffer off just afterward, we are losing the FIFO ODR change flag and ODR switch is blocked. Fix the issue by force applying any waiting ODR change when turning buffer off. Fixes: ec74ae9fd37c ("iio: imu: inv_icm42600: add accurate timestamping") Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com> Cc: stable@vger.kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 daysiio: imu: inv_icm42600: fix odr switch to the same valueJean-Baptiste Maneyrol2-0/+4
commit c9f3a593137d862d424130343e77d4b5260a4f5a upstream. ODR switch is done in 2 steps when FIFO is on : change the ODR register value and acknowledge change when reading the FIFO ODR change flag. When we are switching to the same odr value, we end up waiting for a FIFO ODR flag that is never happening. Fix the issue by doing nothing and exiting properly when we are switching to the same ODR value. Fixes: ec74ae9fd37c ("iio: imu: inv_icm42600: add accurate timestamping") Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com> Cc: stable@vger.kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 daysiio: light: bh1780: fix PM runtime leak on error pathAntoniu Miclaus1-1/+1
commit dd72e6c3cdea05cad24e99710939086f7a113fb5 upstream. Move pm_runtime_put_autosuspend() before the error check to ensure the PM runtime reference count is always decremented after pm_runtime_get_sync(), regardless of whether the read operation succeeds or fails. Fixes: 1f0477f18306 ("iio: light: new driver for the ROHM BH1780") Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com> Reviewed-by: Linus Walleij <linusw@kernel.org> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 daysiio: gyro: mpu3050-i2c: fix pm_runtime error handlingAntoniu Miclaus1-2/+1
commit 91f950b4cbb1aa9ea4eb3999f1463e8044b717fb upstream. The return value of pm_runtime_get_sync() is not checked, and the function always returns success. This allows I2C mux operations to proceed even when the device fails to resume. Use pm_runtime_resume_and_get() and propagate its return value to properly handle resume failures. Fixes: 3904b28efb2c ("iio: gyro: Add driver for the MPU-3050 gyroscope") Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 daysiio: imu: adis: Fix NULL pointer dereference in adis_initRadu Sabau1-1/+1
commit 9990cd4f8827bd1ae3fb6eb7407630d8d463c430 upstream. The adis_init() function dereferences adis->ops to check if the individual function pointers (write, read, reset) are NULL, but does not first check if adis->ops itself is NULL. Drivers like adis16480, adis16490, adis16545 and others do not set custom ops and rely on adis_init() assigning the defaults. Since struct adis is zero-initialized by devm_iio_device_alloc(), adis->ops is NULL when adis_init() is called, causing a NULL pointer dereference: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 pc : adis_init+0xc0/0x118 Call trace: adis_init+0xc0/0x118 adis16480_probe+0xe0/0x670 Fix this by checking if adis->ops is NULL before dereferencing it, falling through to assign the default ops in that case. Fixes: 3b29bcee8f6f ("iio: imu: adis: Add custom ops struct") Signed-off-by: Radu Sabau <radu.sabau@analog.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com> Reviewed-by: Antoniu Miclaus <antoniu.miclaus@analog.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 daysiio: gyro: mpu3050-core: fix pm_runtime error handlingAntoniu Miclaus1-5/+13
commit acc3949aab3e8094641a9c7c2768de1958c88378 upstream. The return value of pm_runtime_get_sync() is not checked, allowing the driver to access hardware that may fail to resume. The device usage count is also unconditionally incremented. Use pm_runtime_resume_and_get() which propagates errors and avoids incrementing the usage count on failure. In preenable, add pm_runtime_put_autosuspend() on set_8khz_samplerate() failure since postdisable does not run when preenable fails. Fixes: 3904b28efb2c ("iio: gyro: Add driver for the MPU-3050 gyroscope") Reviewed-by: Linus Walleij <linusw@kernel.org> Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 daysiio: buffer: Fix wait_queue not being removedNuno Sá1-2/+4
commit 064234044056c93a3719d6893e6e5a26a94a61b6 upstream. In the edge case where the IIO device is unregistered while we're buffering, we were directly returning an error without removing the wait queue. Instead, set 'ret' and break out of the loop. Fixes: 9eeee3b0bf19 ("iio: Add output buffer support") Signed-off-by: Nuno Sá <nuno.sa@analog.com> Reviewed-by: David Lechner <dlechner@baylibre.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 daysiio: chemical: bme680: Fix measurement wait duration calculationChris Spencer1-1/+1
commit f55b9510cd9437da3a0efa08b089caeb47595ff1 upstream. This function refers to the Bosch BME680 API as the source of the calculation, but one of the constants does not match the Bosch implementation. This appears to be a simple transposition of two digits, resulting in a wait time that is too short. This can cause the following 'device measurement cycle incomplete' check to occasionally fail, returning EBUSY to user space. Adjust the constant to match the Bosch implementation and resolve the EBUSY errors. Fixes: 4241665e6ea0 ("iio: chemical: bme680: Fix sensor data read operation") Link: https://github.com/boschsensortec/BME68x_SensorAPI/blob/v4.4.8/bme68x.c#L521 Signed-off-by: Chris Spencer <spencercw@gmail.com> Acked-by: Vasileios Amoiridis <vassilisamir@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 daysiio: potentiometer: mcp4131: fix double application of wiper shiftLukas Schmid1-1/+1
commit 85e4614524dca6c0a43874f475a17de2b9725648 upstream. The MCP4131 wiper address is shifted twice when preparing the SPI command in mcp4131_write_raw(). The address is already shifted when assigned to the local variable "address", but is then shifted again when written to data->buf[0]. This results in an incorrect command being sent to the device and breaks wiper writes to the second channel. Remove the second shift and use the pre-shifted address directly when composing the SPI transfer. Fixes: 22d199a53910 ("iio: potentiometer: add driver for Microchip MCP413X/414X/415X/416X/423X/424X/425X/426X") Signed-off-by: Lukas Schmid <lukas.schmid@netcube.li># Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 daysiio: magnetometer: tlv493d: remove erroneous shift in X-axis dataAntoniu Miclaus1-1/+1
commit 82ee91d6b15f06b6094eea2c26afe0032fe8e177 upstream. TLV493D_BX2_MAG_X_AXIS_LSB is defined as GENMASK(7, 4). FIELD_GET() already right-shifts bits [7:4] to [3:0], so the additional >> 4 discards most of the X-axis low nibble. The Y and Z axes correctly omit this extra shift. Remove it. Fixes: 106511d280c7 ("iio: magnetometer: add support for Infineon TLV493D 3D Magentic sensor") Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 daysiio: chemical: sps30_i2c: fix buffer size in sps30_i2c_read_meas()Antoniu Miclaus1-1/+1
commit 216345f98cae7fcc84f49728c67478ac00321c87 upstream. sizeof(num) evaluates to sizeof(size_t) (8 bytes on 64-bit) instead of the intended __be32 element size (4 bytes). Use sizeof(*meas) to correctly match the buffer element type. Fixes: 8f3f13085278 ("iio: sps30: separate core and interface specific code") Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com> Acked-by: Tomasz Duszynski <tduszyns@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 daysiio: chemical: sps30_serial: fix buffer size in sps30_serial_read_meas()Antoniu Miclaus1-1/+1
commit c3914ce1963c4db25e186112c90fa5d2361e9e0a upstream. sizeof(num) evaluates to sizeof(size_t) which is 8 bytes on 64-bit, but the buffer elements are only 4 bytes. The same function already uses sizeof(*meas) on line 312, making the mismatch evident. Use sizeof(*meas) consistently. Fixes: b2e171f5a5c6 ("iio: sps30: add support for serial interface") Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com> Acked-by: Tomasz Duszynski <tduszyns@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 daysiio: frequency: adf4377: Fix duplicated soft reset maskSeungJu Cheon1-1/+1
commit 6c8bf4b604a8a6346ca71f1c027fa01c2c2e04cb upstream. The regmap_read_poll_timeout() uses ADF4377_0000_SOFT_RESET_R_MSK twice instead of checking both SOFT_RESET_MSK (bit 0) and SOFT_RESET_R_MSK (bit 7). This causes an incomplete reset status check. The code first sets both SOFT_RESET and SOFT_RESET_R bits to 1 via regmap_update_bits(), then polls for them to be cleared. Since we set both bits before polling, we should be waiting for both to clear. Fix by using both masks as done in regmap_update_bits() above. Fixes: eda549e2e524 ("iio: frequency: adf4377: add support for ADF4377") Signed-off-by: SeungJu Cheon <suunj1331@gmail.com> Cc: Stable@vger.kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 daysiio: dac: ds4424: reject -128 RAW valueOleksij Rempel1-1/+1
commit 5187e03b817c26c1c3bcb2645a612ea935c4be89 upstream. The DS442x DAC uses sign-magnitude encoding, so -128 cannot be represented in hardware (7-bit magnitude). Previously, passing -128 resulted in a truncated value that programmed 0mA (magnitude 0) instead of the expected maximum negative current, effectively failing silently. Reject -128 to avoid producing the wrong current. Fixes: d632a2bd8ffc ("iio: dac: ds4422/ds4424 dac driver") Cc: stable@vger.kernel.org Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 daysbtrfs: abort transaction on failure to update root in the received subvol ioctlFilipe Manana1-1/+2
commit 0f475ee0ebce5c9492b260027cd95270191675fa upstream. If we failed to update the root we don't abort the transaction, which is wrong since we already used the transaction to remove an item from the uuid tree. Fixes: dd5f9615fc5c ("Btrfs: maintain subvolume items in the UUID tree") CC: stable@vger.kernel.org # 3.12+ Reviewed-by: Anand Jain <asj@kernel.org> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 daysbtrfs: add missing RCU unlock in error path in ↵Bart Van Assche1-0/+1
try_release_subpage_extent_buffer() commit b2840e33127ce0eea880504b7f133e780f567a9b upstream. Call rcu_read_lock() before exiting the loop in try_release_subpage_extent_buffer() because there is a rcu_read_unlock() call past the loop. This has been detected by the Clang thread-safety analyzer. Fixes: ad580dfa388f ("btrfs: fix subpage deadlock in try_release_subpage_extent_buffer()") CC: stable@vger.kernel.org # 6.18+ Reviewed-by: Qu Wenruo <wqu@suse.com> Reviewed-by: Boris Burkov <boris@bur.io> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 daysbtrfs: fix transaction abort on set received ioctl due to item overflowFilipe Manana3-2/+59
commit 87f2c46003fce4d739138aab4af1942b1afdadac upstream. If the set received ioctl fails due to an item overflow when attempting to add the BTRFS_UUID_KEY_RECEIVED_SUBVOL we have to abort the transaction since we did some metadata updates before. This means that if a user calls this ioctl with the same received UUID field for a lot of subvolumes, we will hit the overflow, trigger the transaction abort and turn the filesystem into RO mode. A malicious user could exploit this, and this ioctl does not even requires that a user has admin privileges (CAP_SYS_ADMIN), only that he/she owns the subvolume. Fix this by doing an early check for item overflow before starting a transaction. This is also race safe because we are holding the subvol_sem semaphore in exclusive (write) mode. A test case for fstests will follow soon. Fixes: dd5f9615fc5c ("Btrfs: maintain subvolume items in the UUID tree") CC: stable@vger.kernel.org # 3.12+ Reviewed-by: Anand Jain <asj@kernel.org> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 daysbtrfs: fix transaction abort on file creation due to name hash collisionFilipe Manana1-0/+19
commit 2d1ababdedd4ba38867c2500eb7f95af5ddeeef7 upstream. If we attempt to create several files with names that result in the same hash, we have to pack them in same dir item and that has a limit inherent to the leaf size. However if we reach that limit, we trigger a transaction abort and turns the filesystem into RO mode. This allows for a malicious user to disrupt a system, without the need to have administration privileges/capabilities. Reproducer: $ cat exploit-hash-collisions.sh #!/bin/bash DEV=/dev/sdi MNT=/mnt/sdi # Use smallest node size to make the test faster and require fewer file # names that result in hash collision. mkfs.btrfs -f --nodesize 4K $DEV mount $DEV $MNT # List of names that result in the same crc32c hash for btrfs. declare -a names=( 'foobar' '%a8tYkxfGMLWRGr55QSeQc4PBNH9PCLIvR6jZnkDtUUru1t@RouaUe_L:@xGkbO3nCwvLNYeK9vhE628gss:T$yZjZ5l-Nbd6CbC$M=hqE-ujhJICXyIxBvYrIU9-TDC' 'AQci3EUB%shMsg-N%frgU:02ByLs=IPJU0OpgiWit5nexSyxZDncY6WB:=zKZuk5Zy0DD$Ua78%MelgBuMqaHGyKsJUFf9s=UW80PcJmKctb46KveLSiUtNmqrMiL9-Y0I_l5Fnam04CGIg=8@U:Z' 'CvVqJpJzueKcuA$wqwePfyu7VxuWNN3ho$p0zi2H8QFYK$7YlEqOhhb%:hHgjhIjW5vnqWHKNP4' 'ET:vk@rFU4tsvMB0$C_p=xQHaYZjvoF%-BTc%wkFW8yaDAPcCYoR%x$FH5O:' 'HwTon%v7SGSP4FE08jBwwiu5aot2CFKXHTeEAa@38fUcNGOWvE@Mz6WBeDH_VooaZ6AgsXPkVGwy9l@@ZbNXabUU9csiWrrOp0MWUdfi$EZ3w9GkIqtz7I_eOsByOkBOO' 'Ij%2VlFGXSuPvxJGf5UWy6O@1svxGha%b@=%wjkq:CIgE6u7eJOjmQY5qTtxE2Rjbis9@us' 'KBkjG5%9R8K9sOG8UTnAYjxLNAvBmvV5vz3IiZaPmKuLYO03-6asI9lJ_j4@6Xo$KZicaLWJ3Pv8XEwVeUPMwbHYWwbx0pYvNlGMO9F:ZhHAwyctnGy%_eujl%WPd4U2BI7qooOSr85J-C2V$LfY' 'NcRfDfuUQ2=zP8K3CCF5dFcpfiOm6mwenShsAb_F%n6GAGC7fT2JFFn:c35X-3aYwoq7jNX5$ZJ6hI3wnZs$7KgGi7wjulffhHNUxAT0fRRLF39vJ@NvaEMxsMO' 'Oj42AQAEzRoTxa5OuSKIr=A_lwGMy132v4g3Pdq1GvUG9874YseIFQ6QU' 'Ono7avN5GjC:_6dBJ_' 'WHmN2gnmaN-9dVDy4aWo:yNGFzz8qsJyJhWEWcud7$QzN2D9R0efIWWEdu5kwWr73NZm4=@CoCDxrrZnRITr-kGtU_cfW2:%2_am' 'WiFnuTEhAG9FEC6zopQmj-A-$LDQ0T3WULz%ox3UZAPybSV6v1Z$b4L_XBi4M4BMBtJZpz93r9xafpB77r:lbwvitWRyo$odnAUYlYMmU4RvgnNd--e=I5hiEjGLETTtaScWlQp8mYsBovZwM2k' 'XKyH=OsOAF3p%uziGF_ZVr$ivrvhVgD@1u%5RtrV-gl_vqAwHkK@x7YwlxX3qT6WKKQ%PR56NrUBU2dOAOAdzr2=5nJuKPM-T-$ZpQfCL7phxQbUcb:BZOTPaFExc-qK-gDRCDW2' 'd3uUR6OFEwZr%ns1XH_@tbxA@cCPmbBRLdyh7p6V45H$P2$F%w0RqrD3M0g8aGvWpoTFMiBdOTJXjD:JF7=h9a_43xBywYAP%r$SPZi%zDg%ql-KvkdUCtF9OLaQlxmd' 'ePTpbnit%hyNm@WELlpKzNZYOzOTf8EQ$sEfkMy1VOfIUu3coyvIr13-Y7Sv5v-Ivax2Go_GQRFMU1b3362nktT9WOJf3SpT%z8sZmM3gvYQBDgmKI%%RM-G7hyrhgYflOw%z::ZRcv5O:lDCFm' 'evqk743Y@dvZAiG5J05L_ROFV@$2%rVWJ2%3nxV72-W7$e$-SK3tuSHA2mBt$qloC5jwNx33GmQUjD%akhBPu=VJ5g$xhlZiaFtTrjeeM5x7dt4cHpX0cZkmfImndYzGmvwQG:$euFYmXn$_2rA9mKZ' 'gkgUtnihWXsZQTEkrMAWIxir09k3t7jk_IK25t1:cy1XWN0GGqC%FrySdcmU7M8MuPO_ppkLw3=Dfr0UuBAL4%GFk2$Ma10V1jDRGJje%Xx9EV2ERaWKtjpwiZwh0gCSJsj5UL7CR8RtW5opCVFKGGy8Cky' 'hNgsG_8lNRik3PvphqPm0yEH3P%%fYG:kQLY=6O-61Wa6nrV_WVGR6TLB09vHOv%g4VQRP8Gzx7VXUY1qvZyS' 'isA7JVzN12xCxVPJZ_qoLm-pTBuhjjHMvV7o=F:EaClfYNyFGlsfw-Kf%uxdqW-kwk1sPl2vhbjyHU1A6$hz' 'kiJ_fgcdZFDiOptjgH5PN9-PSyLO4fbk_:u5_2tz35lV_iXiJ6cx7pwjTtKy-XGaQ5IefmpJ4N_ZqGsqCsKuqOOBgf9LkUdffHet@Wu' 'lvwtxyhE9:%Q3UxeHiViUyNzJsy:fm38pg_b6s25JvdhOAT=1s0$pG25x=LZ2rlHTszj=gN6M4zHZYr_qrB49i=pA--@WqWLIuX7o1S_SfS@2FSiUZN' 'rC24cw3UBDZ=5qJBUMs9e$=S4Y94ni%Z8639vnrGp=0Hv4z3dNFL0fBLmQ40=EYIY:Z=SLc@QLMSt2zsss2ZXrP7j4=' 'uwGl2s-fFrf@GqS=DQqq2I0LJSsOmM%xzTjS:lzXguE3wChdMoHYtLRKPvfaPOZF2fER@j53evbKa7R%A7r4%YEkD=kicJe@SFiGtXHbKe4gCgPAYbnVn' 'UG37U6KKua2bgc:IHzRs7BnB6FD:2Mt5Cc5NdlsW%$1tyvnfz7S27FvNkroXwAW:mBZLA1@qa9WnDbHCDmQmfPMC9z-Eq6QT0jhhPpqyymaD:R02ghwYo%yx7SAaaq-:x33LYpei$5g8DMl3C' 'y2vjek0FE1PDJC0qpfnN:x8k2wCFZ9xiUF2ege=JnP98R%wxjKkdfEiLWvQzmnW' '8-HCSgH5B%K7P8_jaVtQhBXpBk:pE-$P7ts58U0J@iR9YZntMPl7j$s62yAJO@_9eanFPS54b=UTw$94C-t=HLxT8n6o9P=QnIxq-f1=Ne2dvhe6WbjEQtc' 'YPPh:IFt2mtR6XWSmjHptXL_hbSYu8bMw-JP8@PNyaFkdNFsk$M=xfL6LDKCDM-mSyGA_2MBwZ8Dr4=R1D%7-mCaaKGxb990jzaagRktDTyp' '9hD2ApKa_t_7x-a@GCG28kY:7$M@5udI1myQ$x5udtggvagmCQcq9QXWRC5hoB0o-_zHQUqZI5rMcz_kbMgvN5jr63LeYA4Cj-c6F5Ugmx6DgVf@2Jqm%MafecpgooqreJ53P-QTS' ) # Now create files with all those names in the same parent directory. # It should not fail since a 4K leaf has enough space for them. for name in "${names[@]}"; do touch $MNT/$name done # Now add one more file name that causes a crc32c hash collision. # This should fail, but it should not turn the filesystem into RO mode # (which could be exploited by malicious users) due to a transaction # abort. touch $MNT/'W6tIm-VK2@BGC@IBfcgg6j_p:pxp_QUqtWpGD5Ok_GmijKOJJt' # Check that we are able to create another file, with a name that does not cause # a crc32c hash collision. echo -n "hello world" > $MNT/baz # Unmount and mount again, verify file baz exists and with the right content. umount $MNT mount $DEV $MNT echo "File baz content: $(cat $MNT/baz)" umount $MNT When running the reproducer: $ ./exploit-hash-collisions.sh (...) touch: cannot touch '/mnt/sdi/W6tIm-VK2@BGC@IBfcgg6j_p:pxp_QUqtWpGD5Ok_GmijKOJJt': Value too large for defined data type ./exploit-hash-collisions.sh: line 57: /mnt/sdi/baz: Read-only file system cat: /mnt/sdi/baz: No such file or directory File baz content: And the transaction abort stack trace in dmesg/syslog: $ dmesg (...) [758240.509761] ------------[ cut here ]------------ [758240.510668] BTRFS: Transaction aborted (error -75) [758240.511577] WARNING: fs/btrfs/inode.c:6854 at btrfs_create_new_inode+0x805/0xb50 [btrfs], CPU#6: touch/888644 [758240.513513] Modules linked in: btrfs dm_zero (...) [758240.523221] CPU: 6 UID: 0 PID: 888644 Comm: touch Tainted: G W 6.19.0-rc8-btrfs-next-225+ #1 PREEMPT(full) [758240.524621] Tainted: [W]=WARN [758240.525037] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014 [758240.526331] RIP: 0010:btrfs_create_new_inode+0x80b/0xb50 [btrfs] [758240.527093] Code: 0f 82 cf (...) [758240.529211] RSP: 0018:ffffce64418fbb48 EFLAGS: 00010292 [758240.529935] RAX: 00000000ffffffd3 RBX: 0000000000000000 RCX: 00000000ffffffb5 [758240.531040] RDX: 0000000d04f33e06 RSI: 00000000ffffffb5 RDI: ffffffffc0919dd0 [758240.531920] RBP: ffffce64418fbc10 R08: 0000000000000000 R09: 00000000ffffffb5 [758240.532928] R10: 0000000000000000 R11: ffff8e52c0000000 R12: ffff8e53eee7d0f0 [758240.533818] R13: ffff8e57f70932a0 R14: ffff8e5417629568 R15: 0000000000000000 [758240.534664] FS: 00007f1959a2a740(0000) GS:ffff8e5b27cae000(0000) knlGS:0000000000000000 [758240.535821] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [758240.536644] CR2: 00007f1959b10ce0 CR3: 000000012a2cc005 CR4: 0000000000370ef0 [758240.537517] Call Trace: [758240.537828] <TASK> [758240.538099] btrfs_create_common+0xbf/0x140 [btrfs] [758240.538760] path_openat+0x111a/0x15b0 [758240.539252] do_filp_open+0xc2/0x170 [758240.539699] ? preempt_count_add+0x47/0xa0 [758240.540200] ? __virt_addr_valid+0xe4/0x1a0 [758240.540800] ? __check_object_size+0x1b3/0x230 [758240.541661] ? alloc_fd+0x118/0x180 [758240.542315] do_sys_openat2+0x70/0xd0 [758240.543012] __x64_sys_openat+0x50/0xa0 [758240.543723] do_syscall_64+0x50/0xf20 [758240.544462] entry_SYSCALL_64_after_hwframe+0x76/0x7e [758240.545397] RIP: 0033:0x7f1959abc687 [758240.546019] Code: 48 89 fa (...) [758240.548522] RSP: 002b:00007ffe16ff8690 EFLAGS: 00000202 ORIG_RAX: 0000000000000101 [758240.566278] RAX: ffffffffffffffda RBX: 00007f1959a2a740 RCX: 00007f1959abc687 [758240.567068] RDX: 0000000000000941 RSI: 00007ffe16ffa333 RDI: ffffffffffffff9c [758240.567860] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 [758240.568707] R10: 00000000000001b6 R11: 0000000000000202 R12: 0000561eec7c4b90 [758240.569712] R13: 0000561eec7c311f R14: 00007ffe16ffa333 R15: 0000000000000000 [758240.570758] </TASK> [758240.571040] ---[ end trace 0000000000000000 ]--- [758240.571681] BTRFS: error (device sdi state A) in btrfs_create_new_inode:6854: errno=-75 unknown [758240.572899] BTRFS info (device sdi state EA): forced readonly Fix this by checking for hash collision, and if the adding a new name is possible, early in btrfs_create_new_inode() before we do any tree updates, so that we don't need to abort the transaction if we cannot add the new name due to the leaf size limit. A test case for fstests will be sent soon. Fixes: caae78e03234 ("btrfs: move common inode creation code into btrfs_create_new_inode()") CC: stable@vger.kernel.org # 6.1+ Reviewed-by: Boris Burkov <boris@bur.io> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
5 daysbtrfs: fix transaction abort when snapshotting received subvolumesFilipe Manana1-0/+16
commit e1b18b959025e6b5dbad668f391f65d34b39595a upstream. Currently a user can trigger a transaction abort by snapshotting a previously received snapshot a bunch of times until we reach a BTRFS_UUID_KEY_RECEIVED_SUBVOL item overflow (the maximum item size we can store in a leaf). This is very likely not common in practice, but if it happens, it turns the filesystem into RO mode. The snapshot, send and set_received_subvol and subvol_setflags (used by receive) don't require CAP_SYS_ADMIN, just inode_owner_or_capable(). A malicious user could use this to turn a filesystem into RO mode and disrupt a system. Reproducer script: $ cat test.sh #!/bin/bash DEV=/dev/sdi MNT=/mnt/sdi # Use smallest node size to make the test faster. mkfs.btrfs -f --nodesize 4K $DEV mount $DEV $MNT # Create a subvolume and set it to RO so that it can be used for send. btrfs subvolume create $MNT/sv touch $MNT/sv/foo btrfs property set $MNT/sv ro true # Send and receive the subvolume into snaps/sv. mkdir $MNT/snaps btrfs send $MNT/sv | btrfs receive $MNT/snaps # Now snapshot the received subvolume, which has a received_uuid, a # lot of times to trigger the leaf overflow. total=500 for ((i = 1; i <= $total; i++)); do echo -ne "\rCreating snapshot $i/$total" btrfs subvolume snapshot -r $MNT/snaps/sv $MNT/snaps/sv_$i > /dev/null done echo umount $MNT When running the test: $ ./test.sh (...) Create subvolume '/mnt/sdi/sv' At subvol /mnt/sdi/sv At subvol sv Creating snapshot 496/500ERROR: Could not create subvolume: Value too large for defined data type Creating snapshot 497/500ERROR: Could not create subvolume: Read-only file system Creating snapshot 498/500ERROR: Could not create subvolume: Read-only file system Creating snapshot 499/500ERROR: Could not create subvolume: Read-only file system Creating snapshot 500/500ERROR: Could not create subvolume: Read-only file system And in dmesg/syslog: $ dmesg (...) [251067.627338] BTRFS warning (device sdi): insert uuid item failed -75 (0x4628b21c4ac8d898, 0x2598bee2b1515c91) type 252! [251067.629212] ------------[ cut here ]------------ [251067.630033] BTRFS: Transaction aborted (error -75) [251067.630871] WARNING: fs/btrfs/transaction.c:1907 at create_pending_snapshot.cold+0x52/0x465 [btrfs], CPU#10: btrfs/615235 [251067.632851] Modules linked in: btrfs dm_zero (...) [251067.644071] CPU: 10 UID: 0 PID: 615235 Comm: btrfs Tainted: G W 6.19.0-rc8-btrfs-next-225+ #1 PREEMPT(full) [251067.646165] Tainted: [W]=WARN [251067.646733] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014 [251067.648735] RIP: 0010:create_pending_snapshot.cold+0x55/0x465 [btrfs] [251067.649984] Code: f0 48 0f (...) [251067.653313] RSP: 0018:ffffce644908fae8 EFLAGS: 00010292 [251067.653987] RAX: 00000000ffffff01 RBX: ffff8e5639e63a80 RCX: 00000000ffffffd3 [251067.655042] RDX: ffff8e53faa76b00 RSI: 00000000ffffffb5 RDI: ffffffffc0919750 [251067.656077] RBP: ffffce644908fbd8 R08: 0000000000000000 R09: ffffce644908f820 [251067.657068] R10: ffff8e5adc1fffa8 R11: 0000000000000003 R12: ffff8e53c0431bd0 [251067.658050] R13: ffff8e5414593600 R14: ffff8e55efafd000 R15: 00000000ffffffb5 [251067.659019] FS: 00007f2a4944b3c0(0000) GS:ffff8e5b27dae000(0000) knlGS:0000000000000000 [251067.660115] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [251067.660943] CR2: 00007ffc5aa57898 CR3: 00000005813a2003 CR4: 0000000000370ef0 [251067.661972] Call Trace: [251067.662292] <TASK> [251067.662653] create_pending_snapshots+0x97/0xc0 [btrfs] [251067.663413] btrfs_commit_transaction+0x26e/0xc00 [btrfs] [251067.664257] ? btrfs_qgroup_convert_reserved_meta+0x35/0x390 [btrfs] [251067.665238] ? _raw_spin_unlock+0x15/0x30 [251067.665837] ? record_root_in_trans+0xa2/0xd0 [btrfs] [251067.666531] btrfs_mksubvol+0x330/0x580 [btrfs] [251067.667145] btrfs_mksnapshot+0x74/0xa0 [btrfs] [251067.667827] __btrfs_ioctl_snap_create+0x194/0x1d0 [btrfs] [251067.668595] btrfs_ioctl_snap_create_v2+0x107/0x130 [btrfs] [251067.669479] btrfs_ioctl+0x1580/0x2690 [btrfs] [251067.670093] ? count_memcg_events+0x6d/0x180 [251067.670849] ? handle_mm_fault+0x1a0/0x2a0 [251067.671652] __x64_sys_ioctl+0x92/0xe0 [251067.672406] do_syscall_64+0x50/0xf20 [251067.673129] entry_SYSCALL_64_after_hwframe+0x76/0x7e [251067.674096] RIP: 0033:0x7f2a495648db [251067.674812] Code: 00 48 89 (...) [251067.678227] RSP: 002b:00007ffc5aa57840 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [251067.679691] RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f2a495648db [251067.681145] RDX: 00007ffc5aa588b0 RSI: 0000000050009417 RDI: 0000000000000004 [251067.682511] RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 [251067.683842] R10: 000000000000000a R11: 0000000000000246 R12: 00007ffc5aa59910 [251067.685176] R13: 00007ffc5aa588b0 R14: 0000000000000004 R15: 0000000000000006 [251067.686524] </TASK> [251067.686972] ---[ end trace 0000000000000000 ]--- [251067.687890] BTRFS: error (device sdi state A) in create_pending_snapshot:1907: errno=-75 unknown [251067.689049] BTRFS info (device sdi state EA): forced readonly [251067.689054] BTRFS warning (device sdi state EA): Skipping commit of aborted transaction. [251067.690119] BTRFS: error (device sdi state EA) in cleanup_transaction:2043: errno=-75 unknown [251067.702028] BTRFS info (device sdi state EA): last unmount of filesystem 46dc3975-30a2-4a69-a18f-418b859cccda Fix this by ignoring -EOVERFLOW errors from btrfs_uuid_tree_add() in the snapshot creation code when attempting to add the BTRFS_UUID_KEY_RECEIVED_SUBVOL item. This is OK because it's not critical and we are still able to delete the snapshot, as snapshot/subvolume deletion ignores if a BTRFS_UUID_KEY_RECEIVED_SUBVOL is missing (see inode.c:btrfs_delete_subvolume()). As for send/receive, we can still do send/receive operations since it always peeks the first root ID in the existing BTRFS_UUID_KEY_RECEIVED_SUBVOL (it could peek any since all snapshots have the same content), and even if the key is missing, it falls back to searching by BTRFS_UUID_KEY_SUBVOL key. A test case for fstests will be sent soon. Fixes: dd5f9615fc5c ("Btrfs: maintain subvolume items in the UUID tree") CC: stable@vger.kernel.org # 3.12+ Reviewed-by: Boris Burkov <boris@bur.io> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2026-03-25 01:14:07 +0000