| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Link: https://lore.kernel.org/r/20251013144315.184275491@linuxfoundation.org
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Brett A C Sheffield <bacs@librecast.net>
Tested-by: Peter Schneider <pschneider1968@googlemail.com>
Tested-by: Pavel Machek (CIP) <pavel@denx.de>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e9c206324eeb213957a567a9d066bdeb355c7491 upstream.
The cdnsp-pci driver uses pcim_enable_device() to enable a PCI device,
which means the device will be automatically disabled on driver detach
through the managed device framework. The manual pci_disable_device()
call in the error path is therefore redundant.
Found via static anlaysis and this is similar to commit 99ca0b57e49f
("thermal: intel: int340x: processor: Fix warning during module unload").
Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
Cc: stable@vger.kernel.org
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20250903141613.2535472-1-linmq006@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 27f94b71532203b079537180924023a5f636fca1 upstream.
2290 was found in the field to also require this quirk, as long &
high-bandwidth workloads (e.g. USB ethernet) are consistently able to
crash the controller otherwise.
The same change has been made for a number of SoCs in [1], but QCM2290
somehow escaped the list (even though the very closely related SM6115
was there).
Upon a controller crash, the log would read:
xhci-hcd.12.auto: xHCI host not responding to stop endpoint command
xhci-hcd.12.auto: xHCI host controller not responding, assume dead
xhci-hcd.12.auto: HC died; cleaning up
Add snps,parkmode-disable-ss-quirk to the DWC3 instance in order to
prevent the aforementioned breakage.
[1] https://lore.kernel.org/all/20240704152848.3380602-1-quic_kriskura@quicinc.com/
Cc: stable@vger.kernel.org
Reported-by: Rob Clark <robin.clark@oss.qualcomm.com>
Fixes: a64a0192b70c ("arm64: dts: qcom: Add initial QCM2290 device tree")
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250708-topic-2290_usb-v1-1-661e70a63339@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit be5ae730ffa6fd774a00a4705c1e11e078b08ca1 upstream.
Right now the interrupt handler first reads all updated status registers
and only then clears the interrupts. It's possible that a duplicate
interrupt for a changed register or plug state comes in after the
interrupts have been processed but before they have been cleared:
* plug is inserted, TPS_REG_INT_PLUG_EVENT is set
* TPS_REG_INT_EVENT1 is read
* tps6598x_handle_plug_event() has run and registered the plug
* plug is removed again, TPS_REG_INT_PLUG_EVENT is set (again)
* TPS_REG_INT_CLEAR1 is written, TPS_REG_INT_PLUG_EVENT is cleared
We then have no plug connected and no pending interrupt but the tipd
core still thinks there is a plug. It's possible to trigger this with
e.g. a slightly broken Type-C to USB A converter.
Fix this by first clearing the interrupts and only then reading the
updated registers.
Fixes: 45188f27b3d0 ("usb: typec: tipd: Add support for Apple CD321X")
Fixes: 0a4c005bd171 ("usb: typec: driver for TI TPS6598x USB Power Delivery controllers")
Cc: stable@kernel.org
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Sven Peter <sven@kernel.org>
Link: https://lore.kernel.org/r/20250914-apple-usb3-tipd-v1-1-4e99c8649024@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3d3c4cd5c62f24bb3cb4511b7a95df707635e00a upstream.
Prevent USB runtime PM (autosuspend) for AX88772* in bind.
usbnet enables runtime PM (autosuspend) by default, so disabling it via
the usb_driver flag is ineffective. On AX88772B, autosuspend shows no
measurable power saving with current driver (no link partner, admin
up/down). The ~0.453 W -> ~0.248 W drop on v6.1 comes from phylib powering
the PHY off on admin-down, not from USB autosuspend.
The real hazard is that with runtime PM enabled, ndo_open() (under RTNL)
may synchronously trigger autoresume (usb_autopm_get_interface()) into
asix_resume() while the USB PM lock is held. Resume paths then invoke
phylink/phylib and MDIO, which also expect RTNL, leading to possible
deadlocks or PM lock vs MDIO wake issues.
To avoid this, keep the device runtime-PM active by taking a usage
reference in ax88772_bind() and dropping it in unbind(). A non-zero PM
usage count blocks runtime suspend regardless of userspace policy
(.../power/control - pm_runtime_allow/forbid), making this approach
robust against sysfs overrides.
Holding a runtime-PM usage ref does not affect system-wide suspend;
system sleep/resume callbacks continue to run as before.
Fixes: 4a2c7217cd5a ("net: usb: asix: ax88772: manage PHY PM from MAC")
Reported-by: Hubert Wiśniewski <hubert.wisniewski.25632@gmail.com>
Closes: https://lore.kernel.org/all/DCGHG5UJT9G3.2K1GHFZ3H87T0@gmail.com
Tested-by: Hubert Wiśniewski <hubert.wisniewski.25632@gmail.com>
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Closes: https://lore.kernel.org/all/b5ea8296-f981-445d-a09a-2f389d7f6fdd@samsung.com
Cc: stable@vger.kernel.org
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20251005081203.3067982-1-o.rempel@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 25f526507b8ccc6ac3a43bc094d09b1f9b0b90ae upstream.
platform_get_resource() returns NULL in case of failure, so check its
return value and propagate the error in order to prevent NULL pointer
dereference.
Fixes: 6305166c8771 ("bus: fsl-mc: Add ACPI support for fsl-mc")
Cc: stable@vger.kernel.org
Signed-off-by: Salah Triki <salah.triki@gmail.com>
Acked-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/aKwuK6TRr5XNYQ8u@pc
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4002ee98c022d671ecc1e4a84029e9ae7d8a5603 upstream.
While the API contract in docs doesn't specify it explicitly, the
generic implementation of the get_function_name() callback from struct
pinmux_ops - pinmux_generic_get_function_name() - can fail and return
NULL. This is already checked in pinmux_check_ops() so add a similar
check in pinmux_func_name_to_selector() instead of passing the returned
pointer right down to strcmp() where the NULL can get dereferenced. This
is normal operation when adding new pinfunctions.
Cc: stable@vger.kernel.org
Tested-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
pru_rproc_set_ctable()
commit d41e075b077142bb9ae5df40b9ddf9fd7821a811 upstream.
pru_rproc_set_ctable() accessed rproc->priv before the IS_ERR_OR_NULL
check, which could lead to a null pointer dereference. Move the pru
assignment, ensuring we never dereference a NULL rproc pointer.
Fixes: 102853400321 ("remoteproc: pru: Add pru_rproc_set_ctable() function")
Cc: stable@vger.kernel.org
Signed-off-by: Zhen Ni <zhen.ni@easystack.cn>
Link: https://lore.kernel.org/r/20250923112109.1165126-1-zhen.ni@easystack.cn
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6df164e29bd4e6505c5a2e0e5f1e1f6957a16a42 upstream.
In xdr_stream_decode_opaque_auth(), zero-length checksum.len causes
checksum.data to be set to NULL. This triggers a NPD when accessing
checksum.data in gss_krb5_verify_mic_v2(). This patch ensures that
the value of checksum.len is not less than XDR_UNIT.
Fixes: 0653028e8f1c ("SUNRPC: Convert gss_verify_header() to use xdr_stream")
Cc: stable@kernel.org
Signed-off-by: Lei Lu <llfamsec@gmail.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d3366a04770eea807f2826cbdb96934dd8c9bf79 upstream.
Struct ff_effect_compat is embedded twice inside
uinput_ff_upload_compat, contains internal padding. In particular, there
is a hole after struct ff_replay to satisfy alignment requirements for
the following union member. Without clearing the structure,
copy_to_user() may leak stack data to userspace.
Initialize ff_up_compat to zero before filling valid fields.
Fixes: 2d56f3a32c0e ("Input: refactor evdev 32bit compat to be shareable with uinput")
Cc: stable@vger.kernel.org
Signed-off-by: Zhen Ni <zhen.ni@easystack.cn>
Link: https://lore.kernel.org/r/20250928063737.74590-1-zhen.ni@easystack.cn
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c7866ee0a9ddd9789faadf58cdac6abd7aabf045 upstream.
The reset GPIO is not toggled in any critical section where it couldn't
sleep, allow the reset GPIO to sleep. This allows the driver to operate
reset GPIOs connected to I2C GPIO expanders.
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Link: https://lore.kernel.org/r/20251005023335.166483-1-marek.vasut@mailbox.org
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 10df039834f84a297c72ec962c0f9b7c8c5ca31a upstream.
If multiple dma handles are passed with same fd over a remote call
the kernel driver takes a reference and expects that put for the
map will be called as many times to free the map. But DSP only
updates the fd one time in the fd list when the DSP refcount
goes to zero and hence kernel make put call only once for the
fd. This can cause SMMU fault issue as the same fd can be used
in future for some other call.
Fixes: 35a82b87135d ("misc: fastrpc: Add dma handle implementation")
Cc: stable@kernel.org
Co-developed-by: Ekansh Gupta <ekansh.gupta@oss.qualcomm.com>
Signed-off-by: Ekansh Gupta <ekansh.gupta@oss.qualcomm.com>
Signed-off-by: Ling Xu <quic_lxu5@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://lore.kernel.org/r/20250912131236.303102-5-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit da1ba64176e0138f2bfa96f9e43e8c3640d01e1e upstream.
copy_to_user() failure would cause an early return without cleaning up
the fdlist, which has been updated by the DSP. This could lead to map
leak. Fix this by redirecting to a cleanup path on failure, ensuring
that all mapped buffers are properly released before returning.
Fixes: c68cfb718c8f ("misc: fastrpc: Add support for context Invoke method")
Cc: stable@kernel.org
Co-developed-by: Ekansh Gupta <ekansh.gupta@oss.qualcomm.com>
Signed-off-by: Ekansh Gupta <ekansh.gupta@oss.qualcomm.com>
Signed-off-by: Ling Xu <quic_lxu5@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://lore.kernel.org/r/20250912131236.303102-4-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9031626ade38b092b72638dfe0c6ffce8d8acd43 upstream.
Fastrpc driver creates maps for user allocated fd buffers. Before
creating a new map, the map list is checked for any already existing
maps using map fd. Checking with just map fd is not sufficient as the
user can pass offsetted buffer with less size when the map is created
and then a larger size the next time which could result in memory
issues. Check for dma_buf object also when looking up for the map.
Fixes: c68cfb718c8f ("misc: fastrpc: Add support for context Invoke method")
Cc: stable@kernel.org
Co-developed-by: Ekansh Gupta <ekansh.gupta@oss.qualcomm.com>
Signed-off-by: Ekansh Gupta <ekansh.gupta@oss.qualcomm.com>
Signed-off-by: Ling Xu <quic_lxu5@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://lore.kernel.org/r/20250912131236.303102-3-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a9e6aa994917ee602798bbb03180a194b37865bb upstream.
devm_kcalloc() may fail. ndtest_probe() allocates three DMA address
arrays (dcr_dma, label_dma, dimm_dma) and later unconditionally uses
them in ndtest_nvdimm_init(), which can lead to a NULL pointer
dereference under low-memory conditions.
Check all three allocations and return -ENOMEM if any allocation fails,
jumping to the common error path. Do not emit an extra error message
since the allocator already warns on allocation failure.
Fixes: 9399ab61ad82 ("ndtest: Add dimms to the two buses")
Cc: stable@vger.kernel.org
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f52ce0ea90c83a28904c7cc203a70e6434adfecb upstream.
When calling mprotect() to a large hugetlb memory area in our customer's
workload (~300GB hugetlb memory), soft lockup was observed:
watchdog: BUG: soft lockup - CPU#98 stuck for 23s! [t2_new_sysv:126916]
CPU: 98 PID: 126916 Comm: t2_new_sysv Kdump: loaded Not tainted 6.17-rc7
Hardware name: GIGACOMPUTING R2A3-T40-AAV1/Jefferson CIO, BIOS 5.4.4.1 07/15/2025
pstate: 20400009 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : mte_clear_page_tags+0x14/0x24
lr : mte_sync_tags+0x1c0/0x240
sp : ffff80003150bb80
x29: ffff80003150bb80 x28: ffff00739e9705a8 x27: 0000ffd2d6a00000
x26: 0000ff8e4bc00000 x25: 00e80046cde00f45 x24: 0000000000022458
x23: 0000000000000000 x22: 0000000000000004 x21: 000000011b380000
x20: ffff000000000000 x19: 000000011b379f40 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000 x9 : ffffc875e0aa5e2c
x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000
x5 : fffffc01ce7a5c00 x4 : 00000000046cde00 x3 : fffffc0000000000
x2 : 0000000000000004 x1 : 0000000000000040 x0 : ffff0046cde7c000
Call trace:
mte_clear_page_tags+0x14/0x24
set_huge_pte_at+0x25c/0x280
hugetlb_change_protection+0x220/0x430
change_protection+0x5c/0x8c
mprotect_fixup+0x10c/0x294
do_mprotect_pkey.constprop.0+0x2e0/0x3d4
__arm64_sys_mprotect+0x24/0x44
invoke_syscall+0x50/0x160
el0_svc_common+0x48/0x144
do_el0_svc+0x30/0xe0
el0_svc+0x30/0xf0
el0t_64_sync_handler+0xc4/0x148
el0t_64_sync+0x1a4/0x1a8
Soft lockup is not triggered with THP or base page because there is
cond_resched() called for each PMD size.
Although the soft lockup was triggered by MTE, it should be not MTE
specific. The other processing which takes long time in the loop may
trigger soft lockup too.
So add cond_resched() for hugetlb to avoid soft lockup.
Link: https://lkml.kernel.org/r/20250929202402.1663290-1-yang@os.amperecomputing.com
Fixes: 8f860591ffb2 ("[PATCH] Enable mprotect on huge pages")
Signed-off-by: Yang Shi <yang@os.amperecomputing.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com>
Reviewed-by: Christoph Lameter (Ampere) <cl@gentwo.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit acf943e9768ec9d9be80982ca0ebc4bfd6b7631e upstream.
When orphan file feature is enabled, inode can be tracked as orphan
either in the standard orphan list or in the orphan file. The first can
be tested by checking ei->i_orphan list head, the second is recorded by
EXT4_STATE_ORPHAN_FILE inode state flag. There are several places where
we want to check whether inode is tracked as orphan and only some of
them properly check for both possibilities. Luckily the consequences are
mostly minor, the worst that can happen is that we track an inode as
orphan although we don't need to and e2fsck then complains (resulting in
occasional ext4/307 xfstest failures). Fix the problem by introducing a
helper for checking whether an inode is tracked as orphan and use it in
appropriate places.
Fixes: 4a79a98c7b19 ("ext4: Improve scalability of ext4 orphan file handling")
Cc: stable@kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Message-ID: <20250925123038.20264-2-jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 88daf2f448aad05a2e6df738d66fe8b0cf85cee0 upstream.
If client doesn't negotiate with SMB3.1.1 POSIX Extensions,
then proper error code won't be returned due to overwriting.
Return error immediately.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: e2f34481b24db ("cifsd: add server-side procedures for SMB3")
Cc: stable@vger.kernel.org
Signed-off-by: Matvey Kovalev <matvey.kovalev@ispras.ru>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c8168b4faf1d62cbb320a3e518ad31cdd567cb05 upstream.
Automatically disable kaslr when the kernel loads from kexec_file.
kexec_file loads the secondary kernel image to a non-linked address,
inherently providing KASLR-like randomization.
However, on LoongArch where System RAM may be non-contiguous, enabling
KASLR for the second kernel may relocate it to an invalid memory region
and cause a boot failure. Thus, we disable KASLR when "kexec_file" is
detected in the command line.
To ensure compatibility with older kernels loaded via kexec_file, this
patch should be backported to stable branches.
Cc: stable@vger.kernel.org
Signed-off-by: Youling Tang <tangyouling@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8d33a030c566e1f105cd5bf27f37940b6367f3be upstream.
There is a race condition between dm device suspend and table load that
can lead to null pointer dereference. The issue occurs when suspend is
invoked before table load completes:
BUG: kernel NULL pointer dereference, address: 0000000000000054
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 6 PID: 6798 Comm: dmsetup Not tainted 6.6.0-g7e52f5f0ca9b #62
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.1-2.fc37 04/01/2014
RIP: 0010:blk_mq_wait_quiesce_done+0x0/0x50
Call Trace:
<TASK>
blk_mq_quiesce_queue+0x2c/0x50
dm_stop_queue+0xd/0x20
__dm_suspend+0x130/0x330
dm_suspend+0x11a/0x180
dev_suspend+0x27e/0x560
ctl_ioctl+0x4cf/0x850
dm_ctl_ioctl+0xd/0x20
vfs_ioctl+0x1d/0x50
__se_sys_ioctl+0x9b/0xc0
__x64_sys_ioctl+0x19/0x30
x64_sys_call+0x2c4a/0x4620
do_syscall_64+0x9e/0x1b0
The issue can be triggered as below:
T1 T2
dm_suspend table_load
__dm_suspend dm_setup_md_queue
dm_mq_init_request_queue
blk_mq_init_allocated_queue
=> q->mq_ops = set->ops; (1)
dm_stop_queue / dm_wait_for_completion
=> q->tag_set NULL pointer! (2)
=> q->tag_set = set; (3)
Fix this by checking if a valid table (map) exists before performing
request-based suspend and waiting for target I/O. When map is NULL,
skip these table-dependent suspend steps.
Even when map is NULL, no I/O can reach any target because there is
no table loaded; I/O submitted in this state will fail early in the
DM layer. Skipping the table-dependent suspend logic in this case
is safe and avoids NULL pointer dereferences.
Fixes: c4576aed8d85 ("dm: fix request-based dm's use of dm_wait_for_completion")
Cc: stable@vger.kernel.org
Signed-off-by: Zheng Qixing <zhengqixing@huawei.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7f597c2cdb9d3263a6fce07c4fc0a9eaa8e8fc43 upstream.
When suspend and load run concurrently, before q->mq_ops is set in
blk_mq_init_allocated_queue(), __dm_suspend() skip dm_stop_queue(). As a
result, the queue's quiesce depth is not incremented.
Later, once table load has finished and __dm_resume() runs, which triggers
q->quiesce_depth ==0 warning in blk_mq_unquiesce_queue():
Call Trace:
<TASK>
dm_start_queue+0x16/0x20 [dm_mod]
__dm_resume+0xac/0xb0 [dm_mod]
dm_resume+0x12d/0x150 [dm_mod]
do_resume+0x2c2/0x420 [dm_mod]
dev_suspend+0x30/0x130 [dm_mod]
ctl_ioctl+0x402/0x570 [dm_mod]
dm_ctl_ioctl+0x23/0x30 [dm_mod]
Fix this by explicitly tracking whether the request queue was
stopped in __dm_suspend() via a new DMF_QUEUE_STOPPED flag.
Only call dm_start_queue() in __dm_resume() if the queue was
actually stopped.
Fixes: e70feb8b3e68 ("blk-mq: support concurrent queue quiesce/unquiesce")
Cc: stable@vger.kernel.org
Signed-off-by: Zheng Qixing <zhengqixing@huawei.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1efbee6852f1ff698a9981bd731308dd027189fb upstream.
Commit 974cc7b93441 ("mfd: vexpress: Define the device as MFD cells")
removed the return value check from the call to gpiochip_add_data() (or
rather gpiochip_add() back then and later converted to devres) with no
explanation. This function however can still fail, so check the return
value and bail-out if it does.
Cc: stable@vger.kernel.org
Fixes: 974cc7b93441 ("mfd: vexpress: Define the device as MFD cells")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250811-gpio-mmio-mfd-conv-v1-1-68c5c958cf80@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit da32b0e82c523b76265ba1ad25d7ea74f0ece402 upstream.
The NFCR register for MTU5 is at 0x1a95 offset according to Datasheet
Page 725, Table 16.4. The address of all registers is offset by 0x1200,
making the proper address of MTU5 NFCR register be 0x895.
Cc: stable@vger.kernel.org
Fixes: 654c293e1687 ("mfd: Add Renesas RZ/G2L MTU3a core driver")
Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20250910175914.12956-1-cosmin-gabriel.tanislav.xa@renesas.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9c328f54741bd5465ca1dc717c84c04242fac2e1 upstream.
Syzbot reported an uninitialized value bug in nci_init_req, which was
introduced by commit 5aca7966d2a7 ("Merge tag
'perf-tools-fixes-for-v6.17-2025-09-16' of
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools").
This bug arises due to very limited and poor input validation
that was done at nic_valid_size(). This validation only
validates the skb->len (directly reflects size provided at the
userspace interface) with the length provided in the buffer
itself (interpreted as NCI_HEADER). This leads to the processing
of memory content at the address assuming the correct layout
per what opcode requires there. This leads to the accesses to
buffer of `skb_buff->data` which is not assigned anything yet.
Following the same silent drop of packets of invalid sizes at
`nic_valid_size()`, add validation of the data in the respective
handlers and return error values in case of failure. Release
the skb if error values are returned from handlers in
`nci_nft_packet` and effectively do a silent drop
Possible TODO: because we silently drop the packets, the
call to `nci_request` will be waiting for completion of request
and will face timeouts. These timeouts can get excessively logged
in the dmesg. A proper handling of them may require to export
`nci_request_cancel` (or propagate error handling from the
nft packets handlers).
Reported-by: syzbot+740e04c2a93467a0f8c8@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=740e04c2a93467a0f8c8
Fixes: 6a2968aaf50c ("NFC: basic NCI protocol implementation")
Tested-by: syzbot+740e04c2a93467a0f8c8@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Deepak Sharma <deepak.sharma.472935@gmail.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250925132846.213425-1-deepak.sharma.472935@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3bd5e45c2ce30e239d596becd5db720f7eb83c99 upstream.
When parsing Allocation Extent Descriptor, lengthAllocDescs comes from
on-disk data and must be validated against the block size. Crafted or
corrupted images may set lengthAllocDescs so that the total descriptor
length (sizeof(allocExtDesc) + lengthAllocDescs) exceeds the buffer,
leading udf_update_tag() to call crc_itu_t() on out-of-bounds memory and
trigger a KASAN use-after-free read.
BUG: KASAN: use-after-free in crc_itu_t+0x1d5/0x2b0 lib/crc-itu-t.c:60
Read of size 1 at addr ffff888041e7d000 by task syz-executor317/5309
CPU: 0 UID: 0 PID: 5309 Comm: syz-executor317 Not tainted 6.12.0-rc4-syzkaller-00261-g850925a8133c #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:377 [inline]
print_report+0x169/0x550 mm/kasan/report.c:488
kasan_report+0x143/0x180 mm/kasan/report.c:601
crc_itu_t+0x1d5/0x2b0 lib/crc-itu-t.c:60
udf_update_tag+0x70/0x6a0 fs/udf/misc.c:261
udf_write_aext+0x4d8/0x7b0 fs/udf/inode.c:2179
extent_trunc+0x2f7/0x4a0 fs/udf/truncate.c:46
udf_truncate_tail_extent+0x527/0x7e0 fs/udf/truncate.c:106
udf_release_file+0xc1/0x120 fs/udf/file.c:185
__fput+0x23f/0x880 fs/file_table.c:431
task_work_run+0x24f/0x310 kernel/task_work.c:239
exit_task_work include/linux/task_work.h:43 [inline]
do_exit+0xa2f/0x28e0 kernel/exit.c:939
do_group_exit+0x207/0x2c0 kernel/exit.c:1088
__do_sys_exit_group kernel/exit.c:1099 [inline]
__se_sys_exit_group kernel/exit.c:1097 [inline]
__x64_sys_exit_group+0x3f/0x40 kernel/exit.c:1097
x64_sys_call+0x2634/0x2640 arch/x86/include/generated/asm/syscalls_64.h:232
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Validate the computed total length against epos->bh->b_size.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Reported-by: syzbot+8743fca924afed42f93e@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=8743fca924afed42f93e
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Larshin Sergey <Sergey.Larshin@kaspersky.com>
Link: https://patch.msgid.link/20250922131358.745579-1-Sergey.Larshin@kaspersky.com
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 59abe7bc7e7c70e9066b3e46874d1b7e6a13de14 upstream.
In the case of static pipelines, freeing the widgets in the pipelines
that were not suspended after freeing the scheduler widgets results in
errors because the secondary cores are powered off when the scheduler
widgets are freed. Fix this by tearing down the leftover pipelines before
powering off the secondary cores.
Cc: stable@vger.kernel.org
Fixes: d7332c4a4f1a ("ASoC: SOF: ipc3-topology: Fix pipeline tear down logic")
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20251002073125.32471-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4e65bda8273c938039403144730923e77916a3d7 upstream.
wcd934x_codec_parse_data() contains a device reference count leak in
of_slim_get_device() where device_find_child() increases the reference
count of the device but this reference is not properly decreased in
the success path. Add put_device() in wcd934x_codec_parse_data() and
add devm_add_action_or_reset() in the probe function, which ensures
that the reference count of the device is correctly managed.
Memory leak in regmap_init_slimbus() as the allocated regmap is not
released when the device is removed. Using devm_regmap_init_slimbus()
instead of regmap_init_slimbus() to ensure automatic regmap cleanup on
device removal.
Calling path: of_slim_get_device() -> of_find_slim_device() ->
device_find_child(). As comment of device_find_child() says, 'NOTE:
you will need to drop the reference with put_device() after use.'.
Found by code review.
Cc: stable@vger.kernel.org
Fixes: a61f3b4f476e ("ASoC: wcd934x: add support to wcd9340/wcd9341 codec")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20250923065212.26660-1-make24@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b15b7d2a1b09ef5428a8db260251897405a19496 upstream.
Remove the logic to set interrupt mask by default in uio_hv_generic
driver as the interrupt mask value is supposed to be controlled
completely by the user space. If the mask bit gets changed
by the driver, concurrently with user mode operating on the ring,
the mask bit may be set when it is supposed to be clear, and the
user-mode driver will miss an interrupt which will cause a hang.
For eg- when the driver sets inbound ring buffer interrupt mask to 1,
the host does not interrupt the guest on the UIO VMBus channel.
However, setting the mask does not prevent the host from putting a
message in the inbound ring buffer. So let’s assume that happens,
the host puts a message into the ring buffer but does not interrupt.
Subsequently, the user space code in the guest sets the inbound ring
buffer interrupt mask to 0, saying “Hey, I’m ready for interrupts”.
User space code then calls pread() to wait for an interrupt.
Then one of two things happens:
* The host never sends another message. So the pread() waits forever.
* The host does send another message. But because there’s already a
message in the ring buffer, it doesn’t generate an interrupt.
This is the correct behavior, because the host should only send an
interrupt when the inbound ring buffer transitions from empty to
not-empty. Adding an additional message to a ring buffer that is not
empty is not supposed to generate an interrupt on the guest.
Since the guest is waiting in pread() and not removing messages from
the ring buffer, the pread() waits forever.
This could be easily reproduced in hv_fcopy_uio_daemon if we delay
setting interrupt mask to 0.
Similarly if hv_uio_channel_cb() sets the interrupt_mask to 1,
there’s a race condition. Once user space empties the inbound ring
buffer, but before user space sets interrupt_mask to 0, the host could
put another message in the ring buffer but it wouldn’t interrupt.
Then the next pread() would hang.
Fix these by removing all instances where interrupt_mask is changed,
while keeping the one in set_event() unchanged to enable userspace
control the interrupt mask by writing 0/1 to /dev/uioX.
Fixes: 95096f2fbd10 ("uio-hv-generic: new userspace i/o driver for VMBus")
Suggested-by: John Starks <jostarks@microsoft.com>
Signed-off-by: Naman Jain <namjain@linux.microsoft.com>
Cc: stable@vger.kernel.org
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Long Li <longli@microsoft.com>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Tested-by: Tianyu Lan <tiala@microsoft.com>
Link: https://lore.kernel.org/r/20250828044200.492030-1-namjain@linux.microsoft.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 74058c0a9fc8b2b4d5f4a0ef7ee2cfa66a9e49cf upstream.
Syzkaller reports a "KMSAN: uninit-value in squashfs_get_parent" bug.
This is caused by open_by_handle_at() being called with a file handle
containing an invalid parent inode number. In particular the inode number
is that of a symbolic link, rather than a directory.
Squashfs_get_parent() gets called with that symbolic link inode, and
accesses the parent member field.
unsigned int parent_ino = squashfs_i(inode)->parent;
Because non-directory inodes in Squashfs do not have a parent value, this
is uninitialised, and this causes an uninitialised value access.
The fix is to initialise parent with the invalid inode 0, which will cause
an EINVAL error to be returned.
Regular inodes used to share the parent field with the block_list_start
field. This is removed in this commit to enable the parent field to
contain the invalid inode number 0.
Link: https://lkml.kernel.org/r/20250918233308.293861-1-phillip@squashfs.org.uk
Fixes: 122601408d20 ("Squashfs: export operations")
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Reported-by: syzbot+157bdef5cf596ad0da2c@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/68cc2431.050a0220.139b6.0001.GAE@google.com/
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 55c0ced59fe17dee34e9dfd5f7be63cbab207758 ]
When verifying BPF programs, the check_alu_op() function validates
instructions with ALU operations. The 'offset' field in these
instructions is a signed 16-bit integer.
The existing check 'insn->off > 1' was intended to ensure the offset is
either 0, or 1 for BPF_MOD/BPF_DIV. However, because 'insn->off' is
signed, this check incorrectly accepts all negative values (e.g., -1).
This commit tightens the validation by changing the condition to
'(insn->off != 0 && insn->off != 1)'. This ensures that any value
other than the explicitly permitted 0 and 1 is rejected, hardening the
verifier against malformed BPF programs.
Co-developed-by: Shenghao Yuan <shenghaoyuan0928@163.com>
Signed-off-by: Shenghao Yuan <shenghaoyuan0928@163.com>
Co-developed-by: Tianci Cao <ziye@zju.edu.cn>
Signed-off-by: Tianci Cao <ziye@zju.edu.cn>
Signed-off-by: Yazhou Tang <tangyazhou518@outlook.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Fixes: ec0e2da95f72 ("bpf: Support new signed div/mod instructions.")
Link: https://lore.kernel.org/r/tencent_70D024BAE70A0A309A4781694C7B764B0608@qq.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 82a8d0fda55b35361ee7f35b54fa2b66d7847d2b ]
The return value of copy_from_iter and copy_to_iter can't be negative,
check whether the copied lengths are equal.
Fixes: 309bba39c945 ("vringh: iterate on iotlb_translate to handle large translations")
Cc: "Stefano Garzarella" <sgarzare@redhat.com>
Signed-off-by: zhang jiao <zhangjiao2@cmss.chinamobile.com>
Message-Id: <20250910091739.2999-1-zhangjiao2@cmss.chinamobile.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6f5dacf88a32b3fd8b52c8ea781bf188c42aaa95 ]
This reverts commit ceddedc969f0532b7c62ca971ee50d519d2bc0cb.
Commit in question breaks the mapping of PGs to pools for some SKUs.
Specifically multi-host NICs seem to be shipped with a custom buffer
configuration which maps the lossy PG to pool 4. But the bad commit
overrides this with pool 0 which does not have sufficient buffer space
reserved. Resulting in ~40% packet loss. The commit also breaks BMC /
OOB connection completely (100% packet loss).
Revert, similarly to commit 3fbfe251cc9f ("Revert "net/mlx5e: Update and
set Xon/Xoff upon port speed set""). The breakage is exactly the same,
the only difference is that quoted commit would break the NIC immediately
on boot, and the currently reverted commit only when MTU is changed.
Note: "good" kernels do not restore the configuration, so downgrade isn't
enough to recover machines. A NIC power cycle seems to be necessary to
return to a healthy state (or overriding the relevant registers using
a custom patch).
Fixes: ceddedc969f0 ("net/mlx5e: Update and set Xon/Xoff upon MTU set")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250929181529.1848157-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 998a67b954680f26f3734040aeeed08642d49721 ]
The crypto API, through the scatterlist API, expects input buffers to be
in linear memory. We handle this with the cifs_sg_set_buf() helper
that converts vmalloc'd memory to their corresponding pages.
However, when we allocate our aead_request buffer (@creq in
smb2ops.c::crypt_message()), we do so with kvzalloc(), which possibly
puts aead_request->__ctx in vmalloc area.
AEAD algorithm then uses ->__ctx for its private/internal data and
operations, and uses sg_set_buf() for such data on a few places.
This works fine as long as @creq falls into kmalloc zone (small
requests) or vmalloc'd memory is still within linear range.
Tasks' stacks are vmalloc'd by default (CONFIG_VMAP_STACK=y), so too
many tasks will increment the base stacks' addresses to a point where
virt_addr_valid(buf) will fail (BUG() in sg_set_buf()) when that
happens.
In practice: too many parallel reads and writes on an encrypted mount
will trigger this bug.
To fix this, always alloc @creq with kmalloc() instead.
Also drop the @sensitive_size variable/arguments since
kfree_sensitive() doesn't need it.
Backtrace:
[ 945.272081] ------------[ cut here ]------------
[ 945.272774] kernel BUG at include/linux/scatterlist.h:209!
[ 945.273520] Oops: invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC NOPTI
[ 945.274412] CPU: 7 UID: 0 PID: 56 Comm: kworker/u33:0 Kdump: loaded Not tainted 6.15.0-lku-11779-g8e9d6efccdd7-dirty #1 PREEMPT(voluntary)
[ 945.275736] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-2-gc13ff2cd-prebuilt.qemu.org 04/01/2014
[ 945.276877] Workqueue: writeback wb_workfn (flush-cifs-2)
[ 945.277457] RIP: 0010:crypto_gcm_init_common+0x1f9/0x220
[ 945.278018] Code: b0 00 00 00 48 83 c4 08 5b 5d 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc 48 c7 c0 00 00 00 80 48 2b 05 5c 58 e5 00 e9 58 ff ff ff <0f> 0b 0f 0b 0f 0b 0f 0b 0f 0b 0f 0b 48 c7 04 24 01 00 00 00 48 8b
[ 945.279992] RSP: 0018:ffffc90000a27360 EFLAGS: 00010246
[ 945.280578] RAX: 0000000000000000 RBX: ffffc90001d85060 RCX: 0000000000000030
[ 945.281376] RDX: 0000000000080000 RSI: 0000000000000000 RDI: ffffc90081d85070
[ 945.282145] RBP: ffffc90001d85010 R08: ffffc90001d85000 R09: 0000000000000000
[ 945.282898] R10: ffffc90001d85090 R11: 0000000000001000 R12: ffffc90001d85070
[ 945.283656] R13: ffff888113522948 R14: ffffc90001d85060 R15: ffffc90001d85010
[ 945.284407] FS: 0000000000000000(0000) GS:ffff8882e66cf000(0000) knlGS:0000000000000000
[ 945.285262] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 945.285884] CR2: 00007fa7ffdd31f4 CR3: 000000010540d000 CR4: 0000000000350ef0
[ 945.286683] Call Trace:
[ 945.286952] <TASK>
[ 945.287184] ? crypt_message+0x33f/0xad0 [cifs]
[ 945.287719] crypto_gcm_encrypt+0x36/0xe0
[ 945.288152] crypt_message+0x54a/0xad0 [cifs]
[ 945.288724] smb3_init_transform_rq+0x277/0x300 [cifs]
[ 945.289300] smb_send_rqst+0xa3/0x160 [cifs]
[ 945.289944] cifs_call_async+0x178/0x340 [cifs]
[ 945.290514] ? __pfx_smb2_writev_callback+0x10/0x10 [cifs]
[ 945.291177] smb2_async_writev+0x3e3/0x670 [cifs]
[ 945.291759] ? find_held_lock+0x32/0x90
[ 945.292212] ? netfs_advance_write+0xf2/0x310
[ 945.292723] netfs_advance_write+0xf2/0x310
[ 945.293210] netfs_write_folio+0x346/0xcc0
[ 945.293689] ? __pfx__raw_spin_unlock_irq+0x10/0x10
[ 945.294250] netfs_writepages+0x117/0x460
[ 945.294724] do_writepages+0xbe/0x170
[ 945.295152] ? find_held_lock+0x32/0x90
[ 945.295600] ? kvm_sched_clock_read+0x11/0x20
[ 945.296103] __writeback_single_inode+0x56/0x4b0
[ 945.296643] writeback_sb_inodes+0x229/0x550
[ 945.297140] __writeback_inodes_wb+0x4c/0xe0
[ 945.297642] wb_writeback+0x2f1/0x3f0
[ 945.298069] wb_workfn+0x300/0x490
[ 945.298472] process_one_work+0x1fe/0x590
[ 945.298949] worker_thread+0x1ce/0x3c0
[ 945.299397] ? __pfx_worker_thread+0x10/0x10
[ 945.299900] kthread+0x119/0x210
[ 945.300285] ? __pfx_kthread+0x10/0x10
[ 945.300729] ret_from_fork+0x119/0x1b0
[ 945.301163] ? __pfx_kthread+0x10/0x10
[ 945.301601] ret_from_fork_asm+0x1a/0x30
[ 945.302055] </TASK>
Fixes: d08089f649a0 ("cifs: Change the I/O paths to use an iterator rather than a page list")
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5cfbe7ebfa42fd3c517a701dab5bd73524da9088 ]
Add sync reset timeout to stop poll_sync_reset in case there was no
reset done or abort event within timeout. Otherwise poll sync reset will
just continue and in case of fw fatal error no health reporting will be
done.
Fixes: 38b9f903f22b ("net/mlx5: Handle sync reset request event")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Shay Drori <shayd@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 79a0e32b32ac4e4f9e4bb22be97f371c8c116c88 ]
The reclaim_pages_cmd() function sends a command to the firmware to
reclaim pages if the command interface is active.
A race condition can occur if the command interface goes down (e.g., due
to a PCI error) while the mlx5_cmd_do() call is in flight. In this
case, mlx5_cmd_do() will return an error. The original code would
propagate this error immediately, bypassing the software-based page
reclamation logic that is supposed to run when the command interface is
down.
Fix this by checking whether mlx5_cmd_do() returns -ENXIO, which mark
that command interface is down. If this is the case, fall through to
the software reclamation path. If the command failed for any another
reason, or finished successfully, return as before.
Fixes: b898ce7bccf1 ("net/mlx5: cmdif, Avoid skipping reclaim pages if FW is not accessible")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b1f0349bd6d320c382df2e7f6fc2ac95c85f2b18 ]
Stop polling on firmware response to command in polling mode if the
command interface got down. This situation can occur, for example, if a
firmware fatal error is detected during polling.
This change halts the polling process when the command interface goes
down, preventing unnecessary waits.
Fixes: b898ce7bccf1 ("net/mlx5: cmdif, Avoid skipping reclaim pages if FW is not accessible")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Shay Drori <shayd@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8169a6011c5fecc6cb1c3654c541c567d3318de8 ]
The driver did not handle failure of `netdev_alloc_skb_ip_align()`.
If the allocation failed, dereferencing `skb->protocol` could lead to
a NULL pointer dereference.
This patch tries to allocate `skb`. If the allocation fails, it falls
back to the normal path.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Tested-on: D-Link DGE-550T Rev-A3
Signed-off-by: Yeounsu Moon <yyyynoom@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250928190124.1156-1-yyyynoom@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
configurable
[ Upstream commit f017156aea60db8720e47591ed1e041993381ad2 ]
In EC2 instances where the RSS hash key is not configurable, ethtool
shows bogus RSS hash key since ena_get_rxfh_key_size() unconditionally
returns ENA_HASH_KEY_SIZE.
Commit 6a4f7dc82d1e ("net: ena: rss: do not allocate key when not
supported") added proper handling for devices that don't support RSS
hash key configuration, but ena_get_rxfh_key_size() has been unchanged.
When the RSS hash key is not configurable, return 0 instead of
ENA_HASH_KEY_SIZE to clarify getting the value is not supported.
Tested on m5 instance families.
Without patch:
# ethtool -x ens5 | grep -A 1 "RSS hash key"
RSS hash key:
00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
With patch:
# ethtool -x ens5 | grep -A 1 "RSS hash key"
RSS hash key:
Operation not supported
Fixes: 6a4f7dc82d1e ("net: ena: rss: do not allocate key when not supported")
Signed-off-by: Kohei Enju <enjuk@amazon.com>
Link: https://patch.msgid.link/20250929050247.51680-1-enjuk@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8425161ac1204d2185e0a10f5ae652bae75d2451 ]
The nfp_net_get_rxfh_key_size() function returns -EOPNOTSUPP when
devices don't support RSS, and callers treat the negative value as a
large positive value since the return type is u32.
Return 0 when devices don't support RSS, aligning with the ethtool
interface .get_rxfh_key_size() that requires returning 0 in such cases.
Fixes: 9ff304bfaf58 ("nfp: add support for reporting CRC32 hash function")
Signed-off-by: Kohei Enju <enjuk@amazon.com>
Link: https://patch.msgid.link/20250929054230.68120-1-enjuk@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8ed4728eb9f10b57c3eb02e0f6933a89ffcb8a91 ]
In case of a jump to the err label due to atmel_nand_create() or
atmel_nand_controller_add_nand() failure, the reference to nand_np
need to be released
Use for_each_child_of_node_scoped() to fix the issue.
Fixes: f88fc122cc34 ("mtd: nand: Cleanup/rework the atmel_nand driver")
Signed-off-by: Erick Karanja <karanja99erick@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0efdedfa537eb534c251a5b4794caaf72cc55869 ]
When device_register() fails in register_node(), it calls
put_device(&node->dev). This triggers node_device_release(), which calls
kfree(to_node(dev)), thereby freeing the entire node structure.
As a result, when register_node() returns an error, the node memory has
already been freed. Calling kfree(node) again in register_one_node()
leads to a double free.
This patch removes the redundant kfree(node) from register_one_node() to
prevent the double free.
Link: https://lkml.kernel.org/r/20250918054144.58980-1-donettom@linux.ibm.com
Fixes: 786eb990cfb7 ("drivers/base/node: handle error properly in register_one_node()")
Signed-off-by: Donet Tom <donettom@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Oscar Salvador <osalvador@suse.de>
Cc: Alison Schofield <alison.schofield@intel.com>
Cc: Chris Mason <clm@meta.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hiroyouki Kamezawa <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Joanthan Cameron <Jonathan.Cameron@huawei.com>
Cc: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com>
Cc: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8f45f089337d924db24397f55697cda0e6960516 ]
user_cluster_disconnect() frees "conn->cc_private" which is "lc" but then
the error handling frees "lc" a second time. Set "lc" to NULL on this
path to avoid a double free.
Link: https://lkml.kernel.org/r/aNKDz_7JF7aycZ0k@stanley.mountain
Fixes: c994c2ebdbbc ("ocfs2: use the new DLM operation callbacks while requesting new lockspace")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.de>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 612b1dfeb414dfa780a6316014ceddf9a74ff5c0 ]
Fix division by zero in ks_sa_rng_init caused by missing clock
pointer initialization. The clk_get_rate() call is performed on
an uninitialized clk pointer, resulting in division by zero when
calculating delay values.
Add clock initialization code before using the clock.
Fixes: 6d01d8511dce ("hwrng: ks-sa - Add minimum sleep time before ready-polling")
Signed-off-by: Nishanth Menon <nm@ti.com>
drivers/char/hw_random/ks-sa-rng.c | 7 +++++++
1 file changed, 7 insertions(+)
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5851afffe2ab323a53e184ba5a35fddf268f096b ]
Fix the X.509 Basic Constraints CA flag parsing to correctly handle
the ASN.1 DER encoded structure. The parser was incorrectly treating
the length field as the boolean value.
Per RFC 5280 section 4.1, X.509 certificates must use ASN.1 DER encoding.
According to ITU-T X.690, a DER-encoded BOOLEAN is represented as:
Tag (0x01), Length (0x01), Value (0x00 for FALSE, 0xFF for TRUE)
The basicConstraints extension with CA:TRUE is encoded as:
SEQUENCE (0x30) | Length | BOOLEAN (0x01) | Length (0x01) | Value (0xFF)
^-- v[2] ^-- v[3] ^-- v[4]
The parser was checking v[3] (the length field, always 0x01) instead
of v[4] (the actual boolean value, 0xFF for TRUE in DER encoding).
Also handle the case where the extension is an empty SEQUENCE (30 00),
which is valid for CA:FALSE when the default value is omitted as
required by DER encoding rules (X.690 section 11.5).
Per ITU-T X.690-0207:
- Section 11.5: Default values must be omitted in DER
- Section 11.1: DER requires TRUE to be encoded as 0xFF
Link: https://datatracker.ietf.org/doc/html/rfc5280
Link: https://www.itu.int/ITU-T/studygroups/com17/languages/X.690-0207.pdf
Fixes: 30eae2b037af ("KEYS: X.509: Parse Basic Constraints for CA")
Signed-off-by: Fan Wu <wufan@kernel.org>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 03ddb4ac251463ec5b7b069395d9ab89163dd56c ]
When creating an advertisement for BIG the address shall not be
non-resolvable since in case of acting as BASS/Broadcast Assistant the
address must be the same as the connection in order to use the PAST
method and even when PAST/BASS are not in the picture a Periodic
Advertisement can still be synchronized thus the same argument as to
connectable advertisements still stand.
Fixes: eca0ae4aea66 ("Bluetooth: Add initial implementation of BIS connections")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5bf863f4c5da055c1eb08887ae4f26d99dbc4aac ]
For ISO_CONT RX, the data from skb is copied to conn->rx_skb, but the
skb is leaked.
Free skb after copying its data.
Fixes: ccf74f2390d6 ("Bluetooth: Add BTPROTO_ISO socket type")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9950f095d6c875dbe0c9ebfcf972ec88fdf26fc8 ]
This attempt to fix similar issue to sco_conn_free where if the
conn->sk is not set to NULL may lead to UAF on iso_conn_free.
Fixes: ccf74f2390d6 ("Bluetooth: Add BTPROTO_ISO socket type")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 79e562a52adea4afa0601a15964498fae66c823c ]
The debug UUID was only getting set if MGMT_OP_READ_EXP_FEATURES_INFO
was not called with a specific index which breaks the likes of
bluetoothd since it only invokes MGMT_OP_READ_EXP_FEATURES_INFO when an
adapter is plugged, so instead of depending hdev not to be set just
enable the UUID on any index like it was done with iso_sock_uuid.
Fixes: e625e50ceee1 ("Bluetooth: Introduce debug feature when dynamic debug is disabled")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 439263376c2c4e126cac0d07e4987568de4eaba5 ]
The return value of copy_to_iter can't be negative, check whether the
copied length is equal to the requested length instead of checking for
negative values.
Cc: zhang jiao <zhangjiao2@cmss.chinamobile.com>
Link: https://lore.kernel.org/all/20250910091739.2999-1-zhangjiao2@cmss.chinamobile.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Fixes: 309bba39c945 ("vringh: iterate on iotlb_translate to handle large translations")
Link: https://patch.msgid.link/cd637504a6e3967954a9e80fc1b75e8c0978087b.1758723310.git.mst@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 958baf5eaee394e5fd976979b0791a875f14a179 ]
syzbot reported WARNING in rtl8150_start_xmit/usb_submit_urb.
This is the sequence of events that leads to the warning:
rtl8150_start_xmit() {
netif_stop_queue();
usb_submit_urb(dev->tx_urb);
}
rtl8150_set_multicast() {
netif_stop_queue();
netif_wake_queue(); <-- wakes up TX queue before URB is done
}
rtl8150_start_xmit() {
netif_stop_queue();
usb_submit_urb(dev->tx_urb); <-- double submission
}
rtl8150_set_multicast being the ndo_set_rx_mode callback should not be
calling netif_stop_queue and notif_start_queue as these handle
TX queue synchronization.
The net core function dev_set_rx_mode handles the synchronization
for rtl8150_set_multicast making it safe to remove these locks.
Reported-and-tested-by: syzbot+78cae3f37c62ad092caa@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=78cae3f37c62ad092caa
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Tested-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: I Viswanath <viswanathiyyappan@gmail.com>
Link: https://patch.msgid.link/20250924134350.264597-1-viswanathiyyappan@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
