summaryrefslogtreecommitdiff
path: root/Documentation
AgeCommit message (Collapse)AuthorFilesLines
2025-03-28sched/isolation: Prevent boot crash when the boot CPU is nohz_fullOleg Nesterov1-5/+2
Documentation/timers/no_hz.rst states that the "nohz_full=" mask must not include the boot CPU, which is no longer true after: 08ae95f4fd3b ("nohz_full: Allow the boot CPU to be nohz_full"). However after: aae17ebb53cd ("workqueue: Avoid using isolated cpus' timers on queue_delayed_work") the kernel will crash at boot time in this case; housekeeping_any_cpu() returns an invalid CPU number until smp_init() brings the first housekeeping CPU up. Change housekeeping_any_cpu() to check the result of cpumask_any_and() and return smp_processor_id() in this case. This is just the simple and backportable workaround which fixes the symptom, but smp_processor_id() at boot time should be safe at least for type == HK_TYPE_TIMER, this more or less matches the tick_do_timer_boot_cpu logic. There is no worry about cpu_down(); tick_nohz_cpu_down() will not allow to offline tick_do_timer_cpu (the 1st online housekeeping CPU). [ Apply only documentation changes as commit which causes boot crash when boot CPU is nohz_full is not backported to stable kernels - Krishanth ] Reported-by: Chris von Recklinghausen <crecklin@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Phil Auld <pauld@redhat.com> Acked-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/r/20240411143905.GA19288@redhat.com Closes: https://lore.kernel.org/all/20240402105847.GA24832@redhat.com/ Signed-off-by: Krishanth Jagaduri <Krishanth.Jagaduri@sony.com> [ strip out upstream commit and Fixes: so tools don't get confused that this commit actually does anything real - gregkh] Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-07mm: Don't pin ZERO_PAGE in pin_user_pages()David Howells1-0/+6
[ Upstream commit c8070b78751955e59b42457b974bea4a4fe00187 ] Make pin_user_pages*() leave a ZERO_PAGE unpinned if it extracts a pointer to it from the page tables and make unpin_user_page*() correspondingly ignore a ZERO_PAGE when unpinning. We don't want to risk overrunning a zero page's refcount as we're only allowed ~2 million pins on it - something that userspace can conceivably trigger. Add a pair of functions to test whether a page or a folio is a ZERO_PAGE. Signed-off-by: David Howells <dhowells@redhat.com> cc: Christoph Hellwig <hch@infradead.org> cc: David Hildenbrand <david@redhat.com> cc: Lorenzo Stoakes <lstoakes@gmail.com> cc: Andrew Morton <akpm@linux-foundation.org> cc: Jens Axboe <axboe@kernel.dk> cc: Al Viro <viro@zeniv.linux.org.uk> cc: Matthew Wilcox <willy@infradead.org> cc: Jan Kara <jack@suse.cz> cc: Jeff Layton <jlayton@kernel.org> cc: Jason Gunthorpe <jgg@nvidia.com> cc: Logan Gunthorpe <logang@deltatee.com> cc: Hillf Danton <hdanton@sina.com> cc: Christian Brauner <brauner@kernel.org> cc: Linus Torvalds <torvalds@linux-foundation.org> cc: linux-fsdevel@vger.kernel.org cc: linux-block@vger.kernel.org cc: linux-kernel@vger.kernel.org cc: linux-mm@kvack.org Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: David Hildenbrand <david@redhat.com> Link: https://lore.kernel.org/r/20230526214142.958751-2-dhowells@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Stable-dep-of: bddf10d26e6e ("uprobes: Reject the shared zeropage in uprobe_write_opcode()") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-07strparser: Add read_sock callbackJiayuan Chen1-1/+8
[ Upstream commit 0532a79efd68a4d9686b0385e4993af4b130ff82 ] Added a new read_sock handler, allowing users to customize read operations instead of relying on the native socket's read_sock. Signed-off-by: Jiayuan Chen <mrpre@163.com> Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://patch.msgid.link/20250122100917.49845-2-mrpre@163.com Stable-dep-of: 36b62df5683c ("bpf: Fix wrong copied_seq calculation") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-21kconfig: add warn-unknown-symbols sanity checkSergey Senozhatsky1-0/+9
[ Upstream commit 7cd343008b967423b06af8f6d3236749c67d12e8 ] Introduce KCONFIG_WARN_UNKNOWN_SYMBOLS environment variable, which makes Kconfig warn about unknown config symbols. This is especially useful for continuous kernel uprevs when some symbols can be either removed or renamed between kernel releases (which can go unnoticed otherwise). By default KCONFIG_WARN_UNKNOWN_SYMBOLS generates warnings, which are non-terminal. There is an additional environment variable KCONFIG_WERROR that overrides this behaviour and turns warnings into errors. Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Stable-dep-of: a409fc1463d6 ("kconfig: fix memory leak in sym_warn_unmet_dep()") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-21dt-bindings: mfd: bd71815: Fix rsense and typosMatti Vaittinen1-10/+10
[ Upstream commit 6856edf7ead8c54803216a38a7b227bcb3dadff7 ] The sense resistor used for measuring currents is typically some tens of milli Ohms. It has accidentally been documented to be tens of mega Ohms. Fix the size of this resistor and a few copy-paste errors while at it. Drop the unsuitable 'rohm,charger-sense-resistor-ohms' property (which can't represent resistors smaller than one Ohm), and introduce a new 'rohm,charger-sense-resistor-micro-ohms' property with appropriate minimum, maximum and default values instead. Fixes: 4238dc1e6490 ("dt_bindings: mfd: Add ROHM BD71815 PMIC") Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/0efd8e9de0ae8d62ee4c6b78cc565b04007a245d.1731430700.git.mazziesaccount@gmail.com Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-21regulator: dt-bindings: mt6315: Drop regulator-compatible propertyChen-Yu Tsai1-6/+0
[ Upstream commit 08242719a8af603db54a2a79234a8fe600680105 ] The "regulator-compatible" property has been deprecated since 2012 in commit 13511def87b9 ("regulator: deprecate regulator-compatible DT property"), which is so old it's not even mentioned in the converted regulator bindings YAML file. It should not have been used for new submissions such as the MT6315. Drop the property from the MT6315 regulator binding and its examples. Fixes: 977fb5b58469 ("regulator: document binding for MT6315 regulator") Fixes: 6d435a94ba5b ("regulator: mt6315: Enforce regulator-compatible, not name") Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://patch.msgid.link/20241211052427.4178367-2-wenst@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-21dt-bindings: leds: class-multicolor: Fix path to color definitionsGeert Uytterhoeven1-1/+1
[ Upstream commit 609bc99a4452ffbce82d10f024a85d911c42e6cd ] The LED color definitions have always been in include/dt-bindings/leds/common.h in upstream. Fixes: 5c7f8ffe741daae7 ("dt: bindings: Add multicolor class dt bindings documention") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/a3c7ea92e90b77032f2e480d46418b087709286d.1731588129.git.geert+renesas@glider.be Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-21dt-bindings: mmc: controller: clarify the address-cells descriptionNeil Armstrong1-1/+1
[ Upstream commit b2b8e93ec00b8110cb37cbde5400d5abfdaed6a7 ] The term "slot ID" has nothing to do with the SDIO function number which is specified in the reg property of the subnodes, rephrase the description to be more accurate. Fixes: f9b7989859dd ("dt-bindings: mmc: Add YAML schemas for the generic MMC options") Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Acked-by: Rob Herring (Arm) <robh@kernel.org> Message-ID: <20241128-topic-amlogic-arm32-upstream-bindings-fixes-convert-meson-mx-sdio-v4-1-11d9f9200a59@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-01-09dt-bindings: display: adi,adv7533: Drop single lane supportBiju Das1-1/+1
commit ee8f9ed57a397605434caeef351bafa3ec4dfdd4 upstream. As per [1] and [2], ADV7535/7533 supports only 2-, 3-, or 4-lane. Drop unsupported 1-lane from bindings. [1] https://www.analog.com/media/en/technical-documentation/data-sheets/ADV7535.pdf [2] https://www.analog.com/media/en/technical-documentation/data-sheets/ADV7533.pdf Fixes: 1e4d58cd7f88 ("drm/bridge: adv7533: Create a MIPI DSI device") Cc: stable@vger.kernel.org Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241119192040.152657-3-biju.das.jz@bp.renesas.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-19Documentation: PM: Clarify pm_runtime_resume_and_get() return valuePaul Barker1-1/+3
[ Upstream commit ccb84dc8f4a02e7d30ffd388522996546b4d00e1 ] Update the documentation to match the behaviour of the code. pm_runtime_resume_and_get() always returns 0 on success, even if __pm_runtime_resume() returns 1. Fixes: 2c412337cfe6 ("PM: runtime: Add documentation for pm_runtime_resume_and_get()") Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com> Link: https://patch.msgid.link/20241203143729.478-1-paul.barker.ct@bp.renesas.com [ rjw: Subject and changelog edits, adjusted new comment formatting ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-14PCI: Add 'reset_subordinate' to reset hierarchy below bridgeKeith Busch1-0/+11
[ Upstream commit 2fa046449a82a7d0f6d9721dd83e348816038444 ] The "bus" and "cxl_bus" reset methods reset a device by asserting Secondary Bus Reset on the bridge leading to the device. These only work if the device is the only device below the bridge. Add a sysfs 'reset_subordinate' attribute on bridges that can assert Secondary Bus Reset regardless of how many devices are below the bridge. This resets all the devices below a bridge in a single command, including the locking and config space save/restore that reset methods normally do. This may be the only way to reset devices that don't support other reset methods (ACPI, FLR, PM reset, etc). Link: https://lore.kernel.org/r/20241025222755.3756162-1-kbusch@meta.com Signed-off-by: Keith Busch <kbusch@kernel.org> [bhelgaas: commit log, add capable(CAP_SYS_ADMIN) check] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Amey Narkhede <ameynarkhede03@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-14dt-bindings: serial: rs485: Fix rs485-rts-delay propertyMichal Simek1-10/+9
commit 12b3642b6c242061d3ba84e6e3050c3141ded14c upstream. Code expects array only with 2 items which should be checked. But also item checking is not working as it should likely because of incorrect items description. Fixes: d50f974c4f7f ("dt-bindings: serial: Convert rs485 bindings to json-schema") Signed-off-by: Michal Simek <michal.simek@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/820c639b9e22fe037730ed44d1b044cdb6d28b75.1726480384.git.michal.simek@amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-14dt-bindings: iio: dac: ad3552r: fix maximum spi speedAngelo Dureghello1-1/+1
commit d1d1c117f39b2057d1e978f26a8bd9631ddb193b upstream. Fix maximum SPI clock speed, as per datasheet (Rev. B, page 6). Fixes: b0a96c5f599e ("dt-bindings: iio: dac: Add adi,ad3552r.yaml") Cc: stable@vger.kernel.org Signed-off-by: Angelo Dureghello <adureghello@baylibre.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20241003-wip-bl-ad3552r-axi-v0-iio-testing-v4-4-ceb157487329@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-14fs_parser: update mount_api doc to match function signatureRandy Dunlap1-1/+2
[ Upstream commit c66f759832a83cb273ba5a55c66dcc99384efa74 ] Add the missing 'name' parameter to the mount_api documentation for fs_validate_description(). Fixes: 96cafb9ccb15 ("fs_parser: remove fs_parameter_description name field") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20241125215021.231758-1-rdunlap@infradead.org Cc: Eric Sandeen <sandeen@redhat.com> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christian Brauner <brauner@kernel.org> Cc: Jan Kara <jack@suse.cz> Cc: Jonathan Corbet <corbet@lwn.net> Cc: linux-doc@vger.kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-14f2fs: fix to avoid use GC_AT when setting gc_mode as GC_URGENT_LOW or ↵Zhiguo Niu1-2/+5
GC_URGENT_MID [ Upstream commit 296b8cb34e65fa93382cf919be5a056f719c9a26 ] If gc_mode is set to GC_URGENT_LOW or GC_URGENT_MID, cost benefit GC approach should be used, but if ATGC is enabled at the same time, Age-threshold approach will be selected, which can only do amount of GC and it is much less than the numbers of CB approach. some traces: f2fs_gc-254:48-396 [007] ..... 2311600.684028: f2fs_gc_begin: dev = (254,48), gc_type = Background GC, no_background_GC = 0, nr_free_secs = 0, nodes = 1053, dents = 2, imeta = 18, free_sec:44898, free_seg:44898, rsv_seg:239, prefree_seg:0 f2fs_gc-254:48-396 [007] ..... 2311600.684527: f2fs_get_victim: dev = (254,48), type = No TYPE, policy = (Background GC, LFS-mode, Age-threshold), victim = 10, cost = 4294364975, ofs_unit = 1, pre_victim_secno = -1, prefree = 0, free = 44898 f2fs_gc-254:48-396 [007] ..... 2311600.714835: f2fs_gc_end: dev = (254,48), ret = 0, seg_freed = 0, sec_freed = 0, nodes = 1562, dents = 2, imeta = 18, free_sec:44898, free_seg:44898, rsv_seg:239, prefree_seg:0 f2fs_gc-254:48-396 [007] ..... 2311600.714843: f2fs_background_gc: dev = (254,48), wait_ms = 50, prefree = 0, free = 44898 f2fs_gc-254:48-396 [007] ..... 2311600.771785: f2fs_gc_begin: dev = (254,48), gc_type = Background GC, no_background_GC = 0, nr_free_secs = 0, nodes = 1562, dents = 2, imeta = 18, free_sec:44898, free_seg:44898, rsv_seg:239, prefree_seg: f2fs_gc-254:48-396 [007] ..... 2311600.772275: f2fs_gc_end: dev = (254,48), ret = -61, seg_freed = 0, sec_freed = 0, nodes = 1562, dents = 2, imeta = 18, free_sec:44898, free_seg:44898, rsv_seg:239, prefree_seg:0 Fixes: 0e5e81114de1 ("f2fs: add GC_URGENT_LOW mode in gc_urgent") Fixes: d98af5f45520 ("f2fs: introduce gc_urgent_mid mode") Signed-off-by: Zhiguo Niu <zhiguo.niu@unisoc.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-14dt-bindings: clock: axi-clkgen: include AXI clkNuno Sa1-4/+18
[ Upstream commit 47f3f5a82a31527e027929c5cec3dd1ef5ef30f5 ] In order to access the registers of the HW, we need to make sure that the AXI bus clock is enabled. Hence let's increase the number of clocks by one and add clock-names to differentiate between parent clocks and the bus clock. Fixes: 0e646c52cf0e ("clk: Add axi-clkgen driver") Signed-off-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20241029-axi-clkgen-fix-axiclk-v2-1-bc5e0733ad76@analog.com Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-14ASoC: dt-bindings: mt6359: Update generic node name and dmic-modeMacpaul Lin1-5/+5
[ Upstream commit 4649cbd97fdae5069e9a71cd7669b62b90e03669 ] Some fix and updates in the following items: 1. examples: Update generic node name to 'audio-codec' to comply with the coming change in 'mt6359.dtsi'. This change is necessary to fix the dtbs_check error: pmic: 'mt6359codec' does not match any of the regexes: 'pinctrl-[0-9]+' 2. mediatek,dmic-mode: After inspecting the .dts and .dtsi files using 'mt6359-codec', it was discovered that the definitions of 'two wires' and 'one wire' are inverted compared to the DT schema. For example, the following boards using MT6359 PMIC: - mt8192-asurada.dtsi - mt8195-cherry.dtsi These boards use the same definitions of 'dmic-mode' as other boards using MT6358 PMIC. The meaning of '0' or '1' has been noted as comments in the device trees. Upon examining the code in [1] and [2], it was confirmed that the definitions of 'dmic-mode' are consistent between "MT6359 PMIC" and "MT6358 PMIC". Therefore, the DT Schema should be correct as is. References: [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/sound/soc/codecs/mt6358.c#n1875 [2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/sound/soc/codecs/mt6359.c#L1515 Fixes: 539237d1c609 ("dt-bindings: mediatek: mt6359: add codec document") Signed-off-by: Jiaxin Yu <jiaxin.yu@mediatek.com> Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://patch.msgid.link/20240930075451.14196-1-macpaul.lin@mediatek.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-14dt-bindings: vendor-prefixes: Add NeoFidelity, IncIgor Prusov1-0/+2
[ Upstream commit 5d9e6d6fc1b98c8c22d110ee931b3b233d43cd13 ] Add vendor prefix for NeoFidelity, Inc Signed-off-by: Igor Prusov <ivprusov@salutedevices.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20240925-ntp-amps-8918-8835-v3-1-e2459a8191a6@salutedevices.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-14kcsan, seqlock: Support seqcount_latch_tMarco Elver1-1/+1
[ Upstream commit 5c1806c41ce0a0110db5dd4c483cf2dc28b3ddf0 ] While fuzzing an arm64 kernel, Alexander Potapenko reported: | BUG: KCSAN: data-race in ktime_get_mono_fast_ns / timekeeping_update | | write to 0xffffffc082e74248 of 56 bytes by interrupt on cpu 0: | update_fast_timekeeper kernel/time/timekeeping.c:430 [inline] | timekeeping_update+0x1d8/0x2d8 kernel/time/timekeeping.c:768 | timekeeping_advance+0x9e8/0xb78 kernel/time/timekeeping.c:2344 | update_wall_time+0x18/0x38 kernel/time/timekeeping.c:2360 | [...] | | read to 0xffffffc082e74258 of 8 bytes by task 5260 on cpu 1: | __ktime_get_fast_ns kernel/time/timekeeping.c:372 [inline] | ktime_get_mono_fast_ns+0x88/0x174 kernel/time/timekeeping.c:489 | init_srcu_struct_fields+0x40c/0x530 kernel/rcu/srcutree.c:263 | init_srcu_struct+0x14/0x20 kernel/rcu/srcutree.c:311 | [...] | | value changed: 0x000002f875d33266 -> 0x000002f877416866 | | Reported by Kernel Concurrency Sanitizer on: | CPU: 1 UID: 0 PID: 5260 Comm: syz.2.7483 Not tainted 6.12.0-rc3-dirty #78 This is a false positive data race between a seqcount latch writer and a reader accessing stale data. Since its introduction, KCSAN has never understood the seqcount_latch interface (due to being unannotated). Unlike the regular seqlock interface, the seqcount_latch interface for latch writers never has had a well-defined critical section, making it difficult to teach tooling where the critical section starts and ends. Introduce an instrumentable (non-raw) seqcount_latch interface, with which we can clearly denote writer critical sections. This both helps readability and tooling like KCSAN to understand when the writer is done updating all latch copies. Fixes: 88ecd153be95 ("seqlock, kcsan: Add annotations for KCSAN") Reported-by: Alexander Potapenko <glider@google.com> Co-developed-by: "Peter Zijlstra (Intel)" <peterz@infradead.org> Signed-off-by: "Peter Zijlstra (Intel)" <peterz@infradead.org> Signed-off-by: Marco Elver <elver@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20241104161910.780003-4-elver@google.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-14doc: rcu: update printed dynticks counter bitsBaruch Siach1-1/+1
[ Upstream commit 4a09e358922381f9b258e863bcd9c910584203b9 ] The stall warning prints 16 bits since commit 171476775d32 ("context_tracking: Convert state to atomic_t"). Fixes: 171476775d32 ("context_tracking: Convert state to atomic_t") Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: "Paul E. McKenney" <paulmck@kernel.org> Signed-off-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org> Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-14fpga: manager: add owner module and take its refcountMarco Pagani1-14/+20
[ Upstream commit 4d4d2d4346857bf778fafaa97d6f76bb1663e3c9 ] The current implementation of the fpga manager assumes that the low-level module registers a driver for the parent device and uses its owner pointer to take the module's refcount. This approach is problematic since it can lead to a null pointer dereference while attempting to get the manager if the parent device does not have a driver. To address this problem, add a module owner pointer to the fpga_manager struct and use it to take the module's refcount. Modify the functions for registering the manager to take an additional owner module parameter and rename them to avoid conflicts. Use the old function names for helper macros that automatically set the module that registers the manager as the owner. This ensures compatibility with existing low-level control modules and reduces the chances of registering a manager without setting the owner. Also, update the documentation to keep it consistent with the new interface for registering an fpga manager. Other changes: opportunistically move put_device() from __fpga_mgr_get() to fpga_mgr_get() and of_fpga_mgr_get() to improve code clarity since the manager device is taken in these functions. Fixes: 654ba4cc0f3e ("fpga manager: ensure lifetime with of_fpga_mgr_get") Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Suggested-by: Xu Yilun <yilun.xu@intel.com> Signed-off-by: Marco Pagani <marpagan@redhat.com> Acked-by: Xu Yilun <yilun.xu@intel.com> Link: https://lore.kernel.org/r/20240305192926.84886-1-marpagan@redhat.com Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Xiangyu Chen <xiangyu.chen@windriver.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-14fpga: bridge: add owner module and take its refcountMarco Pagani1-2/+5
[ Upstream commit 1da11f822042eb6ef4b6064dc048f157a7852529 ] The current implementation of the fpga bridge assumes that the low-level module registers a driver for the parent device and uses its owner pointer to take the module's refcount. This approach is problematic since it can lead to a null pointer dereference while attempting to get the bridge if the parent device does not have a driver. To address this problem, add a module owner pointer to the fpga_bridge struct and use it to take the module's refcount. Modify the function for registering a bridge to take an additional owner module parameter and rename it to avoid conflicts. Use the old function name for a helper macro that automatically sets the module that registers the bridge as the owner. This ensures compatibility with existing low-level control modules and reduces the chances of registering a bridge without setting the owner. Also, update the documentation to keep it consistent with the new interface for registering an fpga bridge. Other changes: opportunistically move put_device() from __fpga_bridge_get() to fpga_bridge_get() and of_fpga_bridge_get() to improve code clarity since the bridge device is taken in these functions. Fixes: 21aeda950c5f ("fpga: add fpga bridge framework") Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Suggested-by: Xu Yilun <yilun.xu@intel.com> Reviewed-by: Russ Weight <russ.weight@linux.dev> Signed-off-by: Marco Pagani <marpagan@redhat.com> Acked-by: Xu Yilun <yilun.xu@intel.com> Link: https://lore.kernel.org/r/20240322171839.233864-1-marpagan@redhat.com Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Xiangyu Chen <xiangyu.chen@windriver.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-14can: j1939: fix error in J1939 documentation.Alexander Hölzl1-1/+1
[ Upstream commit b6ec62e01aa4229bc9d3861d1073806767ea7838 ] The description of PDU1 format usage mistakenly referred to PDU2 format. Signed-off-by: Alexander Hölzl <alexander.hoelzl@gmx.net> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Acked-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://patch.msgid.link/20241023145257.82709-1-alexander.hoelzl@gmx.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-11-01ASoC: dt-bindings: davinci-mcasp: Fix interrupt propertiesMiquel Raynal1-9/+9
[ Upstream commit 8380dbf1b9ef66e3ce6c1d660fd7259637c2a929 ] Combinations of "tx" alone, "rx" alone and "tx", "rx" together are supposedly valid (see link below), which is not the case today as "rx" alone is not accepted by the current binding. Let's rework the two interrupt properties to expose all correct possibilities. Cc: Péter Ujfalusi <peter.ujfalusi@gmail.com> Link: https://lore.kernel.org/linux-sound/20241003102552.2c11840e@xps-13/T/#m277fce1d49c50d94e071f7890aed472fa2c64052 Fixes: 8be90641a0bb ("ASoC: dt-bindings: davinci-mcasp: convert McASP bindings to yaml schema") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20241003083611.461894-1-miquel.raynal@bootlin.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-11-01ASoC: dt-bindings: davinci-mcasp: Fix interrupts propertyMiquel Raynal1-1/+1
[ Upstream commit 17d8adc4cd5181c13c1041b197b76efc09eaf8a8 ] My understanding of the interrupts property is that it can either be: 1/ - TX 2/ - TX - RX 3/ - Common/combined. There are very little chances that either: - TX - Common/combined or even - TX - RX - Common/combined could be a thing. Looking at the interrupt-names definition (which uses oneOf instead of anyOf), it makes indeed little sense to use anyOf in the interrupts definition. I believe this is just a mistake, hence let's fix it. Fixes: 8be90641a0bb ("ASoC: dt-bindings: davinci-mcasp: convert McASP bindings to yaml schema") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20241001204749.390054-1-miquel.raynal@bootlin.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-11-01net: provide macros for commonly copied lockless queue stop/wake codeJakub Kicinski1-0/+6
[ Upstream commit c91c46de6bbc1147ae5dfe046b87f5f3d6593215 ] A lot of drivers follow the same scheme to stop / start queues without introducing locks between xmit and NAPI tx completions. I'm guessing they all copy'n'paste each other's code. The original code dates back all the way to e1000 and Linux 2.6.19. Smaller drivers shy away from the scheme and introduce a lock which may cause deadlocks in netpoll. Provide macros which encapsulate the necessary logic. The macros do not prevent false wake ups, the extra barrier required to close that race is not worth it. See discussion in: https://lore.kernel.org/all/c39312a2-4537-14b4-270c-9fe1fbb91e89@gmail.com/ Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: 95ecba62e2fd ("net: fix races in netdev_tx_sent_queue()/dev_watchdog()") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-11-01docs: net: reformat driver.rst from a list to sectionsJakub Kicinski1-35/+56
[ Upstream commit d2f5c68e3f7157e874a759e382a5eaffa775b869 ] driver.rst had a historical form of list of common problems. In the age os Sphinx and rendered documentation it's better to use the more usual title + text format. This will allow us to render kdoc into the output more naturally. No changes to the actual text. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: 95ecba62e2fd ("net: fix races in netdev_tx_sent_queue()/dev_watchdog()") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-10-17delayacct: improve the average delay precision of getdelay tool to microsecondWang Yong2-12/+12
[ Upstream commit eca7de7cdc382eb6e0d344c07b1449ed75f5b435 ] Improve the average delay precision of getdelay tool to microsecond. When using the getdelay tool, it is sometimes found that the average delay except CPU is not 0, but display is 0, because the precison is too low. For example, see delay average of SWAP below when using ZRAM. print delayacct stats ON PID 32915 CPU count real total virtual total delay total delay average 339202 2793871936 9233585504 7951112 0.000ms IO count delay total delay average 41 419296904 10ms SWAP count delay total delay average 242589 1045792384 0ms This wrong display is misleading, so improve the millisecond precision of the average delay to microsecond just like CPU. Then user would get more accurate information of delay time. Link: https://lkml.kernel.org/r/202302131408087983857@zte.com.cn Signed-off-by: Wang Yong <wang.yong12@zte.com.cn> Reviewed-by: Yang Yang <yang.yang29@zte.com.cn> Cc: David Hildenbrand <david@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Stable-dep-of: 3840cbe24cf0 ("sched: psi: fix bogus pressure spikes from aggregation race") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-10-17docs/zh_CN: Update the translation of delay-accounting to 6.1-rc8Yanteng Si1-2/+5
[ Upstream commit 6ab587e8e8b434ffc2decdd6db17dff0ef2b13ab ] Update to commit f347c9d2697f ("filemap: make the accounting of thrashing more consistent"). Commit 662ce1dc9caf ("delayacct: track delays from write-protect copy"). Signed-off-by: Yanteng Si <siyanteng@loongson.cn> Link: https://lore.kernel.org/r/798990521e991697f9f2b75f4dc4a485d31c1311.1670642548.git.siyanteng@loongson.cn Signed-off-by: Jonathan Corbet <corbet@lwn.net> Stable-dep-of: 3840cbe24cf0 ("sched: psi: fix bogus pressure spikes from aggregation race") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-10-17arm64: errata: Expand speculative SSBS workaround once moreMark Rutland1-0/+4
[ Upstream commit 081eb7932c2b244f63317a982c5e3990e2c7fbdd ] A number of Arm Ltd CPUs suffer from errata whereby an MSR to the SSBS special-purpose register does not affect subsequent speculative instructions, permitting speculative store bypassing for a window of time. We worked around this for a number of CPUs in commits: * 7187bb7d0b5c7dfa ("arm64: errata: Add workaround for Arm errata 3194386 and 3312417") * 75b3c43eab594bfb ("arm64: errata: Expand speculative SSBS workaround") * 145502cac7ea70b5 ("arm64: errata: Expand speculative SSBS workaround (again)") Since then, a (hopefully final) batch of updates have been published, with two more affected CPUs. For the affected CPUs the existing mitigation is sufficient, as described in their respective Software Developer Errata Notice (SDEN) documents: * Cortex-A715 (MP148) SDEN v15.0, erratum 3456084 https://developer.arm.com/documentation/SDEN-2148827/1500/ * Neoverse-N3 (MP195) SDEN v5.0, erratum 3456111 https://developer.arm.com/documentation/SDEN-3050973/0500/ Enable the existing mitigation by adding the relevant MIDRs to erratum_spec_ssbs_list, and update silicon-errata.rst and the Kconfig text accordingly. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: James Morse <james.morse@arm.com> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20240930111705.3352047-3-mark.rutland@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> [ Mark: fix conflict in silicon-errata.rst, handle move ] Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-10-17proc: add config & param to block forcing mem writesAdrian Ratiu1-0/+10
[ Upstream commit 41e8149c8892ed1962bd15350b3c3e6e90cba7f4 ] This adds a Kconfig option and boot param to allow removing the FOLL_FORCE flag from /proc/pid/mem write calls because it can be abused. The traditional forcing behavior is kept as default because it can break GDB and some other use cases. Previously we tried a more sophisticated approach allowing distributions to fine-tune /proc/pid/mem behavior, however that got NAK-ed by Linus [1], who prefers this simpler approach with semantics also easier to understand for users. Link: https://lore.kernel.org/lkml/CAHk-=wiGWLChxYmUA5HrT5aopZrB7_2VTa0NLZcxORgkUe5tEQ@mail.gmail.com/ [1] Cc: Doug Anderson <dianders@chromium.org> Cc: Jeff Xu <jeffxu@google.com> Cc: Jann Horn <jannh@google.com> Cc: Kees Cook <kees@kernel.org> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Christian Brauner <brauner@kernel.org> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com> Link: https://lore.kernel.org/r/20240802080225.89408-1-adrian.ratiu@collabora.com Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-10-17dt-bindings: iio: asahi-kasei,ak8975: drop incorrect AK09116 compatibleKrzysztof Kozlowski1-1/+0
[ Upstream commit c7668ac67bc21aebdd8e2d7f839bfffba31b7713 ] All compatibles in this binding without prefixes were deprecated, so adding a new deprecated one after some time is not allowed, because it defies the core logic of deprecating things. Drop the AK09916 vendorless compatible. Fixes: 76e28aa97fa0 ("iio: magnetometer: ak8975: add AK09116 support") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://patch.msgid.link/20240806053016.6401-2-krzysztof.kozlowski@linaro.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-10-17ABI: testing: fix admv8818 attr descriptionAntoniu Miclaus1-1/+1
[ Upstream commit 7d34b4ad8cd2867b130b5b8d7d76d0d6092bd019 ] Fix description of the filter_mode_available attribute by pointing to the correct name of the attribute that can be written with valid values. Fixes: bf92d87d7c67 ("iio:filter:admv8818: Add sysfs ABI documentation") Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com> Link: https://patch.msgid.link/20240702081851.4663-1-antoniu.miclaus@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-10-17ipmi: docs: don't advertise deprecated sysfs entriesWolfram Sang1-1/+1
[ Upstream commit 64dce81f8c373c681e62d5ffe0397c45a35d48a2 ] "i2c-adapter" class entries are deprecated since 2009. Switch to the proper location. Reported-by: Heiner Kallweit <hkallweit1@gmail.com> Closes: https://lore.kernel.org/r/80c4a898-5867-4162-ac85-bdf7c7c68746@gmail.com Fixes: 259307074bfc ("ipmi: Add SMBus interface driver (SSIF)") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Message-Id: <20240901090211.3797-2-wsa+renesas@sang-engineering.com> Signed-off-by: Corey Minyard <corey@minyard.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-08hwspinlock: Introduce hwspin_lock_bust()Richard Maina1-0/+11
[ Upstream commit 7c327d56597d8de1680cf24e956b704270d3d84a ] When a remoteproc crashes or goes down unexpectedly this can result in a state where locks held by the remoteproc will remain locked possibly resulting in deadlock. This new API hwspin_lock_bust() allows hwspinlock implementers to define a bust operation for freeing previously acquired hwspinlocks after verifying ownership of the acquired lock. Signed-off-by: Richard Maina <quic_rmaina@quicinc.com> Reviewed-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Chris Lew <quic_clew@quicinc.com> Link: https://lore.kernel.org/r/20240529-hwspinlock-bust-v3-1-c8b924ffa5a2@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-29gfs2: Remove LM_FLAG_PRIORITY flagAndreas Gruenbacher1-2/+1
commit 0b93bac2271e11beb980fca037a34a9819c7dc37 upstream. The last user of this flag was removed in commit b77b4a4815a9 ("gfs2: Rework freeze / thaw logic"). Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-29bpf: Replace bpf_lpm_trie_key 0-length array with flexible arrayKees Cook1-1/+1
[ Upstream commit 896880ff30866f386ebed14ab81ce1ad3710cfc4 ] Replace deprecated 0-length array in struct bpf_lpm_trie_key with flexible array. Found with GCC 13: ../kernel/bpf/lpm_trie.c:207:51: warning: array subscript i is outside array bounds of 'const __u8[0]' {aka 'const unsigned char[]'} [-Warray-bounds=] 207 | *(__be16 *)&key->data[i]); | ^~~~~~~~~~~~~ ../include/uapi/linux/swab.h:102:54: note: in definition of macro '__swab16' 102 | #define __swab16(x) (__u16)__builtin_bswap16((__u16)(x)) | ^ ../include/linux/byteorder/generic.h:97:21: note: in expansion of macro '__be16_to_cpu' 97 | #define be16_to_cpu __be16_to_cpu | ^~~~~~~~~~~~~ ../kernel/bpf/lpm_trie.c:206:28: note: in expansion of macro 'be16_to_cpu' 206 | u16 diff = be16_to_cpu(*(__be16 *)&node->data[i] ^ | ^~~~~~~~~~~ In file included from ../include/linux/bpf.h:7: ../include/uapi/linux/bpf.h:82:17: note: while referencing 'data' 82 | __u8 data[0]; /* Arbitrary size */ | ^~~~ And found at run-time under CONFIG_FORTIFY_SOURCE: UBSAN: array-index-out-of-bounds in kernel/bpf/lpm_trie.c:218:49 index 0 is out of range for type '__u8 [*]' Changing struct bpf_lpm_trie_key is difficult since has been used by userspace. For example, in Cilium: struct egress_gw_policy_key { struct bpf_lpm_trie_key lpm_key; __u32 saddr; __u32 daddr; }; While direct references to the "data" member haven't been found, there are static initializers what include the final member. For example, the "{}" here: struct egress_gw_policy_key in_key = { .lpm_key = { 32 + 24, {} }, .saddr = CLIENT_IP, .daddr = EXTERNAL_SVC_IP & 0Xffffff, }; To avoid the build time and run time warnings seen with a 0-sized trailing array for struct bpf_lpm_trie_key, introduce a new struct that correctly uses a flexible array for the trailing bytes, struct bpf_lpm_trie_key_u8. As part of this, include the "header" portion (which is just the "prefixlen" member), so it can be used by anything building a bpf_lpr_trie_key that has trailing members that aren't a u8 flexible array (like the self-test[1]), which is named struct bpf_lpm_trie_key_hdr. Unfortunately, C++ refuses to parse the __struct_group() helper, so it is not possible to define struct bpf_lpm_trie_key_hdr directly in struct bpf_lpm_trie_key_u8, so we must open-code the union directly. Adjust the kernel code to use struct bpf_lpm_trie_key_u8 through-out, and for the selftest to use struct bpf_lpm_trie_key_hdr. Add a comment to the UAPI header directing folks to the two new options. Reported-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Gustavo A. R. Silva <gustavoars@kernel.org> Closes: https://paste.debian.net/hidden/ca500597/ Link: https://lore.kernel.org/all/202206281009.4332AA33@keescook/ [1] Link: https://lore.kernel.org/bpf/20240222155612.it.533-kees@kernel.org Stable-dep-of: 59f2f841179a ("bpf: Avoid kfree_rcu() under lock in bpf_lpm_trie.") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-29docs/bpf: Document BPF_MAP_TYPE_LPM_TRIE mapDonald Hunter1-0/+181
[ Upstream commit 83177c0dca3811faa051124731a692609caee7c7 ] Add documentation for BPF_MAP_TYPE_LPM_TRIE including kernel BPF helper usage, userspace usage and examples. Signed-off-by: Donald Hunter <donald.hunter@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20221101114542.24481-2-donald.hunter@gmail.com Stable-dep-of: 59f2f841179a ("bpf: Avoid kfree_rcu() under lock in bpf_lpm_trie.") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-14smb3: fix setting SecurityFlags when encryption is requiredSteve French1-1/+1
commit 1b5487aefb1ce7a6b1f15a33297d1231306b4122 upstream. Setting encryption as required in security flags was broken. For example (to require all mounts to be encrypted by setting): "echo 0x400c5 > /proc/fs/cifs/SecurityFlags" Would return "Invalid argument" and log "Unsupported security flags" This patch fixes that (e.g. allowing overriding the default for SecurityFlags 0x00c5, including 0x40000 to require seal, ie SMB3.1.1 encryption) so now that works and forces encryption on subsequent mounts. Acked-by: Bharath SM <bharathsm@microsoft.com> Cc: stable@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-14clocksource: Scale the watchdog read retries automaticallyFeng Tang1-6/+0
[ Upstream commit 2ed08e4bc53298db3f87b528cd804cb0cce066a9 ] On a 8-socket server the TSC is wrongly marked as 'unstable' and disabled during boot time on about one out of 120 boot attempts: clocksource: timekeeping watchdog on CPU227: wd-tsc-wd excessive read-back delay of 153560ns vs. limit of 125000ns, wd-wd read-back delay only 11440ns, attempt 3, marking tsc unstable tsc: Marking TSC unstable due to clocksource watchdog TSC found unstable after boot, most likely due to broken BIOS. Use 'tsc=unstable'. sched_clock: Marking unstable (119294969739, 159204297)<-(125446229205, -5992055152) clocksource: Checking clocksource tsc synchronization from CPU 319 to CPUs 0,99,136,180,210,542,601,896. clocksource: Switched to clocksource hpet The reason is that for platform with a large number of CPUs, there are sporadic big or huge read latencies while reading the watchog/clocksource during boot or when system is under stress work load, and the frequency and maximum value of the latency goes up with the number of online CPUs. The cCurrent code already has logic to detect and filter such high latency case by reading the watchdog twice and checking the two deltas. Due to the randomness of the latency, there is a low probabilty that the first delta (latency) is big, but the second delta is small and looks valid. The watchdog code retries the readouts by default twice, which is not necessarily sufficient for systems with a large number of CPUs. There is a command line parameter 'max_cswd_read_retries' which allows to increase the number of retries, but that's not user friendly as it needs to be tweaked per system. As the number of required retries is proportional to the number of online CPUs, this parameter can be calculated at runtime. Scale and enlarge the number of retries according to the number of online CPUs and remove the command line parameter completely. [ tglx: Massaged change log and comments ] Signed-off-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Jin Wang <jin1.wang@intel.com> Tested-by: Paul E. McKenney <paulmck@kernel.org> Reviewed-by: Waiman Long <longman@redhat.com> Reviewed-by: Paul E. McKenney <paulmck@kernel.org> Link: https://lore.kernel.org/r/20240221060859.1027450-1-feng.tang@intel.com Stable-dep-of: f2655ac2c06a ("clocksource: Fix brown-bag boolean thinko in cs_watchdog_read()") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-14arm64: errata: Expand speculative SSBS workaround (again)Mark Rutland1-0/+18
[ Upstream commit adeec61a4723fd3e39da68db4cc4d924e6d7f641 ] A number of Arm Ltd CPUs suffer from errata whereby an MSR to the SSBS special-purpose register does not affect subsequent speculative instructions, permitting speculative store bypassing for a window of time. We worked around this for a number of CPUs in commits: * 7187bb7d0b5c7dfa ("arm64: errata: Add workaround for Arm errata 3194386 and 3312417") * 75b3c43eab594bfb ("arm64: errata: Expand speculative SSBS workaround") Since then, similar errata have been published for a number of other Arm Ltd CPUs, for which the same mitigation is sufficient. This is described in their respective Software Developer Errata Notice (SDEN) documents: * Cortex-A76 (MP052) SDEN v31.0, erratum 3324349 https://developer.arm.com/documentation/SDEN-885749/3100/ * Cortex-A77 (MP074) SDEN v19.0, erratum 3324348 https://developer.arm.com/documentation/SDEN-1152370/1900/ * Cortex-A78 (MP102) SDEN v21.0, erratum 3324344 https://developer.arm.com/documentation/SDEN-1401784/2100/ * Cortex-A78C (MP138) SDEN v16.0, erratum 3324346 https://developer.arm.com/documentation/SDEN-1707916/1600/ * Cortex-A78C (MP154) SDEN v10.0, erratum 3324347 https://developer.arm.com/documentation/SDEN-2004089/1000/ * Cortex-A725 (MP190) SDEN v5.0, erratum 3456106 https://developer.arm.com/documentation/SDEN-2832921/0500/ * Cortex-X1 (MP077) SDEN v21.0, erratum 3324344 https://developer.arm.com/documentation/SDEN-1401782/2100/ * Cortex-X1C (MP136) SDEN v16.0, erratum 3324346 https://developer.arm.com/documentation/SDEN-1707914/1600/ * Neoverse-N1 (MP050) SDEN v32.0, erratum 3324349 https://developer.arm.com/documentation/SDEN-885747/3200/ * Neoverse-V1 (MP076) SDEN v19.0, erratum 3324341 https://developer.arm.com/documentation/SDEN-1401781/1900/ Note that due to the manner in which Arm develops IP and tracks errata, some CPUs share a common erratum number and some CPUs have multiple erratum numbers for the same HW issue. On parts without SB, it is necessary to use ISB for the workaround. The spec_bar() macro used in the mitigation will expand to a "DSB SY; ISB" sequence in this case, which is sufficient on all affected parts. Enable the existing mitigation by adding the relevant MIDRs to erratum_spec_ssbs_list. The list is sorted alphanumerically (involving moving Neoverse-V3 after Neoverse-V2) so that this is easy to audit and potentially extend again in future. The Kconfig text is also updated to clarify the set of affected parts and the mitigation. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: James Morse <james.morse@arm.com> Cc: Will Deacon <will@kernel.org> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20240801101803.1982459-4-mark.rutland@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> [ Mark: fix conflicts in silicon-errata.rst ] Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-14arm64: errata: Expand speculative SSBS workaroundMark Rutland1-0/+14
[ Upstream commit 75b3c43eab594bfbd8184ec8ee1a6b820950819a ] A number of Arm Ltd CPUs suffer from errata whereby an MSR to the SSBS special-purpose register does not affect subsequent speculative instructions, permitting speculative store bypassing for a window of time. We worked around this for Cortex-X4 and Neoverse-V3, in commit: 7187bb7d0b5c7dfa ("arm64: errata: Add workaround for Arm errata 3194386 and 3312417") ... as per their Software Developer Errata Notice (SDEN) documents: * Cortex-X4 SDEN v8.0, erratum 3194386: https://developer.arm.com/documentation/SDEN-2432808/0800/ * Neoverse-V3 SDEN v6.0, erratum 3312417: https://developer.arm.com/documentation/SDEN-2891958/0600/ Since then, similar errata have been published for a number of other Arm Ltd CPUs, for which the mitigation is the same. This is described in their respective SDEN documents: * Cortex-A710 SDEN v19.0, errataum 3324338 https://developer.arm.com/documentation/SDEN-1775101/1900/?lang=en * Cortex-A720 SDEN v11.0, erratum 3456091 https://developer.arm.com/documentation/SDEN-2439421/1100/?lang=en * Cortex-X2 SDEN v19.0, erratum 3324338 https://developer.arm.com/documentation/SDEN-1775100/1900/?lang=en * Cortex-X3 SDEN v14.0, erratum 3324335 https://developer.arm.com/documentation/SDEN-2055130/1400/?lang=en * Cortex-X925 SDEN v8.0, erratum 3324334 https://developer.arm.com/documentation/109108/800/?lang=en * Neoverse-N2 SDEN v17.0, erratum 3324339 https://developer.arm.com/documentation/SDEN-1982442/1700/?lang=en * Neoverse-V2 SDEN v9.0, erratum 3324336 https://developer.arm.com/documentation/SDEN-2332927/900/?lang=en Note that due to shared design lineage, some CPUs share the same erratum number. Add these to the existing mitigation under CONFIG_ARM64_ERRATUM_3194386. As listing all of the erratum IDs in the runtime description would be unwieldy, this is reduced to: "SSBS not fully self-synchronizing" ... matching the description of the errata in all of the SDENs. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: James Morse <james.morse@arm.com> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20240603111812.1514101-6-mark.rutland@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> [ Mark: fix conflicts and renames ] Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-14arm64: errata: Unify speculative SSBS errata logicMark Rutland1-1/+1
[ Upstream commit ec768766608092087dfb5c1fc45a16a6f524dee2 ] Cortex-X4 erratum 3194386 and Neoverse-V3 erratum 3312417 are identical, with duplicate Kconfig text and some unsightly ifdeffery. While we try to share code behind CONFIG_ARM64_WORKAROUND_SPECULATIVE_SSBS, having separate options results in a fair amount of boilerplate code, and this will only get worse as we expand the set of affected CPUs. To reduce this boilerplate, unify the two behind a common Kconfig option. This removes the duplicate text and Kconfig logic, and removes the need for the intermediate ARM64_WORKAROUND_SPECULATIVE_SSBS option. The set of affected CPUs is described as a list so that this can easily be extended. I've used ARM64_ERRATUM_3194386 (matching the Neoverse-V3 erratum ID) as the common option, matching the way we use ARM64_ERRATUM_1319367 to cover Cortex-A57 erratum 1319537 and Cortex-A72 erratum 1319367. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: James Morse <james.morse@arm.com> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20240603111812.1514101-5-mark.rutland@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> [ Mark: fix conflicts & renames, drop unneeded cpucaps.h ] Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-14arm64: errata: Add workaround for Arm errata 3194386 and 3312417Mark Rutland1-0/+4
[ Upstream commit 7187bb7d0b5c7dfa18ca82e9e5c75e13861b1d88 ] Cortex-X4 and Neoverse-V3 suffer from errata whereby an MSR to the SSBS special-purpose register does not affect subsequent speculative instructions, permitting speculative store bypassing for a window of time. This is described in their Software Developer Errata Notice (SDEN) documents: * Cortex-X4 SDEN v8.0, erratum 3194386: https://developer.arm.com/documentation/SDEN-2432808/0800/ * Neoverse-V3 SDEN v6.0, erratum 3312417: https://developer.arm.com/documentation/SDEN-2891958/0600/ To workaround these errata, it is necessary to place a speculation barrier (SB) after MSR to the SSBS special-purpose register. This patch adds the requisite SB after writes to SSBS within the kernel, and hides the presence of SSBS from EL0 such that userspace software which cares about SSBS will manipulate this via prctl(PR_GET_SPECULATION_CTRL, ...). Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: James Morse <james.morse@arm.com> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20240508081400.235362-5-mark.rutland@arm.com Signed-off-by: Will Deacon <will@kernel.org> [ Mark: fix conflicts & renames, drop unneeded cpucaps.h, fold in user_feature_fixup() ] Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-14profiling: remove profile=sleep supportTetsuo Handa1-3/+1
commit b88f55389ad27f05ed84af9e1026aa64dbfabc9a upstream. The kernel sleep profile is no longer working due to a recursive locking bug introduced by commit 42a20f86dc19 ("sched: Add wrapper for get_wchan() to keep task blocked") Booting with the 'profile=sleep' kernel command line option added or executing # echo -n sleep > /sys/kernel/profiling after boot causes the system to lock up. Lockdep reports kthreadd/3 is trying to acquire lock: ffff93ac82e08d58 (&p->pi_lock){....}-{2:2}, at: get_wchan+0x32/0x70 but task is already holding lock: ffff93ac82e08d58 (&p->pi_lock){....}-{2:2}, at: try_to_wake_up+0x53/0x370 with the call trace being lock_acquire+0xc8/0x2f0 get_wchan+0x32/0x70 __update_stats_enqueue_sleeper+0x151/0x430 enqueue_entity+0x4b0/0x520 enqueue_task_fair+0x92/0x6b0 ttwu_do_activate+0x73/0x140 try_to_wake_up+0x213/0x370 swake_up_locked+0x20/0x50 complete+0x2f/0x40 kthread+0xfb/0x180 However, since nobody noticed this regression for more than two years, let's remove 'profile=sleep' support based on the assumption that nobody needs this functionality. Fixes: 42a20f86dc19 ("sched: Add wrapper for get_wchan() to keep task blocked") Cc: stable@vger.kernel.org # v5.16+ Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-03dt-bindings: thermal: correct thermal zone node name limitKrzysztof Kozlowski1-1/+4
commit 97e32381d0fc6c2602a767b0c46e15eb2b75971d upstream. Linux kernel uses thermal zone node name during registering thermal zones and has a hard-coded limit of 20 characters, including terminating NUL byte. The bindings expect node names to finish with '-thermal' which is eight bytes long, thus we have only 11 characters for the reset of the node name (thus 10 for the pattern after leading fixed character). Reported-by: Rob Herring <robh@kernel.org> Closes: https://lore.kernel.org/all/CAL_JsqKogbT_4DPd1n94xqeHaU_J8ve5K09WOyVsRX3jxxUW3w@mail.gmail.com/ Fixes: 1202a442a31f ("dt-bindings: thermal: Add yaml bindings for thermal zones") Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240702145248.47184-1-krzysztof.kozlowski@linaro.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-07-18cifs: fix setting SecurityFlags to trueSteve French1-25/+11
commit d2346e2836318a227057ed41061114cbebee5d2a upstream. If you try to set /proc/fs/cifs/SecurityFlags to 1 it will set them to CIFSSEC_MUST_NTLMV2 which no longer is relevant (the less secure ones like lanman have been removed from cifs.ko) and is also missing some flags (like for signing and encryption) and can even cause mount to fail, so change this to set it to Kerberos in this case. Also change the description of the SecurityFlags to remove mention of flags which are no longer supported. Cc: stable@vger.kernel.org Reviewed-by: Shyam Prasad N <sprasad@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-07-05dt-bindings: i2c: atmel,at91sam: correct path to i2c-controller schemaKrzysztof Kozlowski1-1/+1
[ Upstream commit d4e001ffeccfc128c715057e866f301ac9b95728 ] The referenced i2c-controller.yaml schema is provided by dtschema package (outside of Linux kernel), so use full path to reference it. Cc: stable@vger.kernel.org Fixes: 7ea75dd386be ("dt-bindings: i2c: convert i2c-at91 to json-schema") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-07-05dt-bindings: i2c: Drop unneeded quotesRob Herring8-14/+14
[ Upstream commit fc114c75680da73c3815512d880f69cecc9a9b87 ] Cleanup bindings dropping unneeded quotes. Once all these are fixed, checking for this can be enabled in yamllint. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Nicolas Ferre <nicolas.ferre@microchip.com> Reviewed-by: Alain Volmat <alain.volmat@foss.st.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Stable-dep-of: d4e001ffeccf ("dt-bindings: i2c: atmel,at91sam: correct path to i2c-controller schema") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-27dt-bindings: i2c: google,cros-ec-i2c-tunnel: correct path to i2c-controller ↵Krzysztof Kozlowski1-1/+1
schema commit 5c8cfd592bb7632200b4edac8f2c7ec892ed9d81 upstream. The referenced i2c-controller.yaml schema is provided by dtschema package (outside of Linux kernel), so use full path to reference it. Cc: stable@vger.kernel.org Fixes: 1acd4577a66f ("dt-bindings: i2c: convert i2c-cros-ec-tunnel to json-schema") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-05-01 00:06:54 +0000