| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- INPUT_PROP_HAPTIC_TOUCHPAD definition added early in 6.18 cycle has
been renamed to INPUT_PROP_PRESSUREPAD to better reflect the kind of
devices it is supposed to be set for
- a new ID for a touchscreen found in Ayaneo Flip DS in Goodix driver
- Goodix driver no longer tries to set reset pin as "input" as it
causes issues when there is no pull up resistor installed on the
board
- fixes for cros_ec_keyb, imx_sc_key, and pegasus-notetaker drivers to
deal with potential out-of-bounds access and memory corruption issues
* tag 'input-for-v6.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: rename INPUT_PROP_HAPTIC_TOUCHPAD to INPUT_PROP_PRESSUREPAD
Input: cros_ec_keyb - fix an invalid memory access
Input: imx_sc_key - fix memory corruption on unload
Input: pegasus-notetaker - fix potential out-of-bounds access
Input: goodix - remove setting of RST pin to input
Input: goodix - add support for ACPI ID GDIX1003
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- Fix register naming in the Mediatek mt8189 driver
- Select REGMAP_MMIO for the Realtek RTD driver
- Fix the number of items in groups in the Toshiba Visconti driver
- Fix a memory leak in the Cirrus CS42L43 driver
- Fix a deadlock (!) in Qualcomm pinmux configuration
- Fix use of uninitialized memory and list initialization in the S32CC
pin controller
* tag 'pinctrl-v6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
dt-bindings: pinctrl: xlnx,versal-pinctrl: Add missing unevaluatedProperties on '^conf' nodes
pinctrl: s32cc: initialize gpio_pin_config::list after kmalloc()
pinctrl: s32cc: fix uninitialized memory in s32_pinctrl_desc
pinctrl: qcom: msm: Fix deadlock in pinmux configuration
pinctrl: cirrus: Fix fwnode leak in cs42l43_pin_probe()
dt-bindings: pinctrl: toshiba,visconti: Fix number of items in groups
pinctrl: realtek: Select REGMAP_MMIO for RTD driver
pinctrl: mediatek: mt8189: align register base names to dt-bindings ones
pinctrl: mediatek: mt8196: align register base names to dt-bindings ones
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
"This one has lots of new HW entries which adds to the size in diffstat
but the individual changes are simple.
Fixes
- acer-wmi: Ignore backlight event
- alienware-wmi-wmax: Fix quirk match table order & drop redundant
entries
- amd/pmc:
- Add Xbox Ally to spurious 8042 quirk list
- Quirk list Lenovo Legion Go 2 NVMe resume
- msi-wmi-platform:
- Correct GUID to uppercase
- GUID is uncleverly copy-pasted from an example so add a DMI
whitelist
- intel/speed_select_if: PCIBIOS_* return code conversion
- intel-uncore-freq & ISST: Fix kernel doc warnings
New HW support
- alienware-wmi-wmax:
- Alienware 16 Aurora support
- Alienware M support
- Alienware X support
- Dell G support
- amd/pmc:
- ROG Xbox Ally (non-X) support
- huaway-wmi: HONOR MagicBoox X16/X14 PrintScreen & YOYO keys
- hp-wmi:
- Omen 16-wf1xxx fan support
- Omen MAX 16-ah0xx fan + thermal profile support
- Victus 16-r0 and 16-s0 fan + thermal profile support
- intel/hid: Intel Nova Lake support
- intel-uncore-freq:
- Intel Panther Lake support
- Intel Wildcat Lake support
- Intel Nova Lake support"
* tag 'platform-drivers-x86-v6.18-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (21 commits)
platform/x86: intel-uncore-freq: fix all header kernel-doc warnings
platform/x86: acer-wmi: Ignore backlight event
platform/x86/intel/speed_select_if: Convert PCIBIOS_* return codes to errnos
platform/x86/intel/hid: Add Nova Lake support
platform/x86: alienware-wmi-wmax: Add AWCC support to Alienware 16 Aurora
platform/x86: hp-wmi: Add Omen MAX 16-ah0xx fan support and thermal profile
platform/x86: msi-wmi-platform: Fix typo in WMI GUID
platform/x86: msi-wmi-platform: Only load on MSI devices
platform/x86/amd: pmc: Add Lenovo Legion Go 2 to pmc quirk list
platform/x86/amd/pmc: Add spurious_8042 to Xbox Ally
platform/x86/amd/pmc: Add support for Van Gogh SoC
platform/x86: alienware-wmi-wmax: Add support for the whole "G" family
platform/x86: alienware-wmi-wmax: Add support for the whole "X" family
platform/x86: alienware-wmi-wmax: Add support for the whole "M" family
platform/x86: alienware-wmi-wmax: Drop redundant DMI entries
platform/x86: alienware-wmi-wmax: Fix "Alienware m16 R1 AMD" quirk order
platform/x86: ISST: isst_if.h: fix all kernel-doc warnings
platform/x86: intel-uncore-freq: Add additional client processors
platform/x86: hp-wmi: Add Omen 16-wf1xxx fan support
platform/x86: huawei-wmi: add keys for HONOR models
...
|
|
on '^conf' nodes
Add the missing unevaluatedProperties to disallow extra properties on
the '^conf' nodes.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
And expand it to encompass all pressure pads.
Definition: "pressure pad" as used here as includes all touchpads that
use physical pressure to convert to click, without physical hinges. Also
called haptic touchpads in general parlance, Synaptics calls them
ForcePads.
Most (all?) pressure pads are currently advertised as
INPUT_PROP_BUTTONPAD. The suggestion to identify them as pressure pads
by defining the resolution on ABS_MT_PRESSURE has been in the docs since
commit 20ccc8dd38a3 ("Documentation: input: define
ABS_PRESSURE/ABS_MT_PRESSURE resolution as grams") but few devices
provide this information.
In userspace it's thus impossible to determine whether a device is a
true pressure pad (pressure equals pressure) or a normal clickpad with
(pressure equals finger size).
Commit 7075ae4ac9db ("Input: add INPUT_PROP_HAPTIC_TOUCHPAD") introduces
INPUT_PROP_HAPTIC_TOUCHPAD but restricted it to those touchpads that
have support for userspace-controlled effects. Let's expand and rename
that definition to include all pressure pad touchpads since those that
do support FF effects can be identified by the presence of the
FF_HAPTIC bit.
This means:
- clickpad: INPUT_PROP_BUTTONPAD
- pressurepad: INPUT_PROP_BUTTONPAD + INPUT_PROP_PRESSUREPAD
- pressurepad with configurable haptics:
INPUT_PROP_BUTTONPAD + INPUT_PROP_PRESSUREPAD + FF_HAPTIC
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Link: https://patch.msgid.link/20251106114534.GA405512@tassie
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes. All changes are device-specific, and
nothing stands out.
- A regression fix for HD-audio HDMI probe
- USB-audio hardening patches for issues spotted by fuzzers
- ASoC fixes for TAS278x, SoundWire and Cirrus
- Usual HD-audio and USB-audio quirks"
* tag 'sound-6.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: usb-audio: Add native DSD quirks for PureAudio DAC series
ASoC: rsnd: fix OF node reference leak in rsnd_ssiu_probe()
ALSA: hda/tas2781: Correct the wrong project ID
ALSA: usb-audio: Fix NULL pointer dereference in snd_usb_mixer_controls_badd
ASoC: SDCA: bug fix while parsing mipi-sdca-control-cn-list
ALSA: usb-audio: Fix potential overflow of PCM transfer buffer
ALSA: hda/tas2781: Add new quirk for HP new projects
ASoC: tas2781: fix getting the wrong device number
ASoC: codecs: va-macro: fix resource leak in probe error path
ASoC: tas2783A: Fix issues in firmware parsing
ASoC: sdw_utils: fix device reference leak in is_sdca_endpoint_present()
ASoC: cs4271: Fix regulator leak on probe failure
ALSA: hda/hdmi: Fix breakage at probing nvhdmi-mcp driver
ASoC: da7213: Use component driver suspend/resume
ALSA: usb-audio: add min_mute quirk for SteelSeries Arctis
ASoC: doc: cs35l56: Update firmware filename description for B0 silicon
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from Bluetooth and Wireless. No known outstanding
regressions.
Current release - regressions:
- eth:
- bonding: fix mii_status when slave is down
- mlx5e: fix missing error assignment in mlx5e_xfrm_add_state()
Previous releases - regressions:
- sched: limit try_bulk_dequeue_skb() batches
- ipv4: route: prevent rt_bind_exception() from rebinding stale fnhe
- af_unix: initialise scc_index in unix_add_edge()
- netpoll: fix incorrect refcount handling causing incorrect cleanup
- bluetooth: don't hold spin lock over sleeping functions
- hsr: Fix supervision frame sending on HSRv0
- sctp: prevent possible shift out-of-bounds
- tipc: fix use-after-free in tipc_mon_reinit_self().
- dsa: tag_brcm: do not mark link local traffic as offloaded
- eth: virtio-net: fix incorrect flags recording in big mode
Previous releases - always broken:
- sched: initialize struct tc_ife to fix kernel-infoleak
- wifi:
- mac80211: reject address change while connecting
- iwlwifi: avoid toggling links due to wrong element use
- bluetooth: cancel mesh send timer when hdev removed
- strparser: fix signed/unsigned mismatch bug
- handshake: fix memory leak in tls_handshake_accept()
Misc:
- selftests: mptcp: fix some flaky tests"
* tag 'net-6.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (60 commits)
hsr: Follow standard for HSRv0 supervision frames
hsr: Fix supervision frame sending on HSRv0
virtio-net: fix incorrect flags recording in big mode
ipv4: route: Prevent rt_bind_exception() from rebinding stale fnhe
wifi: iwlwifi: mld: always take beacon ies in link grading
wifi: iwlwifi: mvm: fix beacon template/fixed rate
wifi: iwlwifi: fix aux ROC time event iterator usage
net_sched: limit try_bulk_dequeue_skb() batches
selftests: mptcp: join: properly kill background tasks
selftests: mptcp: connect: trunc: read all recv data
selftests: mptcp: join: userspace: longer transfer
selftests: mptcp: join: endpoints: longer transfer
selftests: mptcp: join: rm: set backup flag
selftests: mptcp: connect: fix fallback note due to OoO
ethtool: fix incorrect kernel-doc style comment in ethtool.h
mlx5: Fix default values in create CQ
Bluetooth: btrtl: Avoid loading the config file on security chips
net/mlx5e: Fix potentially misleading debug message
net/mlx5e: Fix wraparound in rate limiting for values above 255 Gbps
net/mlx5e: Fix maxrate wraparound in threshold between units
...
|
|
The WMI driver core only supports GUID strings containing only
uppercase characters, however the GUID string used by the
msi-wmi-platform driver contains a single lowercase character.
This prevents the WMI driver core from matching said driver to
its WMI device.
Fix this by turning the lowercase character into a uppercase
character. Also update the WMI driver development guide to warn
about this.
Reported-by: Antheas Kapenekakis <lkml@antheas.dev>
Fixes: 9c0beb6b29e7 ("platform/x86: wmi: Add MSI WMI Platform driver")
Tested-by: Antheas Kapenekakis <lkml@antheas.dev>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20251110111253.16204-3-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- use the firmware node of the GPIO chip, not its label for software
node lookup
- fix invalid pointer access in GPIO debugfs
- drop unused functions from gpio-tb10x
- fix a regression in gpio-aggregator: restore the set_config()
callback in the driver
- correct schema $id path in ti,twl4030 DT bindings
* tag 'gpio-fixes-for-v6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: tb10x: Drop unused tb10x_set_bits() function
gpio: aggregator: restore the set_config operation
gpiolib: fix invalid pointer access in debugfs
gpio: swnode: don't use the swnode's name as the key for GPIO lookup
dt-bindings: gpio: ti,twl4030: Correct the schema $id path
|
|
Fix typo "handul" to "handful" and remove outdated limitation
stating only generic netlink is supported (we have netlink-raw).
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20251105192908.686458-1-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the device references were changed from relative to absolute in
commit e65cb011349e ("Documentation: ACPI: Fix parent device
references"), the MUX0 device was omitted from the paths.
So add it to fix the references.
Fixes: e65cb011349e ("Documentation: ACPI: Fix parent device references")
Closes: https://lore.kernel.org/all/48d0fb45-096c-4caa-b51c-753c2f17f018@gmail.com/
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251027192628.130998-1-jonas.gorski@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Update the text for firmware file naming to show that the l?u? suffix is
supported on CS35L56 B0 silicon and ampN was only used on early firmware.
The previous version of this text only said that B0 silicon used the ampN
suffix. Since kernel 6.16 the driver supports both the old ampN and
new l?u? suffix for B0 silicon. New firmwares will use the l?u? suffix.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251103115809.33953-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The $id for a binding should match its file path. The ti,twl4030-gpio
binding is located in the gpio/ subdirectory but was missing this from
its $id.
Correct the path to follow the standard convention.
Fixes: 842dcff8e2d6 ("dt-bindings: gpio: Convert ti,twl4030-gpio to DT schema")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Fixes: 842dcff8e2d6 ("dt-bindings: gpio: Convert ti,twl4030-gpio to DT schema")
Link: https://lore.kernel.org/r/20250821194710.16043-1-jihed.chaibi.dev@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes. It became slightly bigger than usual due
to timing issues (holidays, etc), but all changes are rather
device-specific fixes, so not really worrisome.
- ASoC Cirrus codec fixes for AMD
- Various fixes for ASoC Intel AVS, Qualcomm, SoundWire, FSL,
Mediatek, Renesas
- A few HD-audio quirks, and USB-audio regression fixes for Presonus"
* tag 'sound-6.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (24 commits)
ALSA: hda/realtek: Enable mic on Vaio RPL
ASoC: dt-bindings: pm4125-sdw: correct number of soundwire ports
ASoC: renesas: rz-ssi: Use proper dma_buffer_pos after resume
ASoC: soc_sdw_utils: remove cs42l43 component_name
ASoC: fsl_sai: Fix sync error in consumer mode
ASoC: Fix build for sdw_utils
ALSA: hda/realtek: Fix mute led for HP Victus 15-fa1xxx (MB 8C2D)
ASoC: rt721: fix prepare clock stop failed
ALSA: usb-audio: don't log messages meant for 1810c when initializing 1824c
ASoC: mediatek: Fix double pm_runtime_disable in remove functions
ASoC: fsl_micfil: correct the endian format for DSD
ASoC: fsl_sai: fix bit order for DSD format
ASoC: Intel: avs: Use snd_codec format when initializing probe
ASoC: Intel: avs: Disable periods-elapsed work when closing PCM
ASoC: Intel: avs: Unprepare a stream when XRUN occurs
ASoC: sdw_utils: add name_prefix for rt1321 part id
ASoC: qdsp6: q6asm: do not sleep while atomic
ASoC: Intel: soc-acpi-intel-ptl-match: Remove cs42l43 match from sdw link3
ASOC: max98090/91: fix for filter configuration: AHPF removed DMIC2_HPF added
ASoC: amd: acp: Add ACP7.0 match entries for cs35l56 and cs42l43
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from wireless, Bluetooth and netfilter.
Current release - regressions:
- tcp: fix too slow tcp_rcvbuf_grow() action
- bluetooth: fix corruption in h4_recv_buf() after cleanup
Previous releases - regressions:
- mptcp: restore window probe
- bluetooth:
- fix connection cleanup with BIG with 2 or more BIS
- fix crash in set_mesh_sync and set_mesh_complete
- batman-adv: release references to inactive interfaces
- nic:
- ice: fix usage of logical PF id
- sfc: fix potential memory leak in efx_mae_process_mport()
Previous releases - always broken:
- devmem: refresh devmem TX dst in case of route invalidation
- netfilter: add seqadj extension for natted connections
- wifi:
- iwlwifi: fix potential use after free in iwl_mld_remove_link()
- brcmfmac: fix crash while sending action frames in standalone AP Mode
- eth:
- mlx5e: cancel tls RX async resync request in error flows
- ixgbe: fix memory leak and use-after-free in ixgbe_recovery_probe()
- hibmcge: fix rx buf avl irq is not re-enabled in irq_handle issue
- cxgb4: fix potential use-after-free in ipsec callback
- nfp: fix memory leak in nfp_net_alloc()"
* tag 'net-6.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (75 commits)
net: sctp: fix KMSAN uninit-value in sctp_inq_pop
net: devmem: refresh devmem TX dst in case of route invalidation
net: stmmac: est: Fix GCL bounds checks
net: stmmac: Consider Tx VLAN offload tag length for maxSDU
net: stmmac: vlan: Disable 802.1AD tag insertion offload
net/mlx5e: kTLS, Cancel RX async resync request in error flows
net: tls: Cancel RX async resync request on rcd_delta overflow
net: tls: Change async resync helpers argument
net: phy: dp83869: fix STRAP_OPMODE bitmask
selftests: net: use BASH for bareudp testing
net: mctp: Fix tx queue stall
net/mlx5: Don't zero user_count when destroying FDB tables
net: usb: asix_devices: Check return value of usbnet_get_endpoints
mptcp: zero window probe mib
mptcp: restore window probe
mptcp: fix MSG_PEEK stream corruption
mptcp: drop bogus optimization in __mptcp_check_push()
netconsole: Fix race condition in between reader and writer of userdata
Documentation: netconsole: Remove obsolete contact people
nfp: xsk: fix memory leak in nfp_net_alloc()
...
|
|
Breno Leitao has been listed in MAINTAINERS as netconsole maintainer
since 7c938e438c56db ("MAINTAINERS: make Breno the netconsole
maintainer"), but the documentation says otherwise that bug reports
should be sent to original netconsole authors.
Remove obsolate contact info.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20251028132027.48102-1-bagasdotme@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For some reason we ended up limiting the number of soundwire ports to 2
in the bindings, the actual codec supports 4 rx and 5 tx ports.
Fixes: 88d0d17192c5 ("ASoC: dt-bindings: add bindings for pm4125 audio codec")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20251029144636.357203-1-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Commit 267bca002c50 ("dt-bindings: net: sparx5: correct LAN969x register
space windows") said that LAN969x has exactly two address spaces ("reg"
property) but implemented it as 2 or more. Narrow the constraint to
properly express that only two items are allowed, which also matches
Linux driver.
Fixes: 267bca002c50 ("dt-bindings: net: sparx5: correct LAN969x register space windows")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251026101741.20507-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The dpll.yaml spec incorrectly omitted module-name and clock-id from the
pin-get operation reply specification, even though the kernel DPLL
implementation has always included these attributes in pin-get responses
since the initial implementation.
This spec inconsistency caused issues with the C YNL code generator.
The generated dpll_pin_get_rsp structure was missing these fields.
Fix the spec by adding module-name and clock-id to the pin-attrs reply
specification to match the actual kernel behavior.
Fixes: 3badff3a25d8 ("dpll: spec: Add Netlink spec in YAML")
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20251024185512.363376-1-poros@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are some small tty and serial driver fixes for reported issues.
Included in here are:
- sh-sci serial driver fixes
- 8250_dw and _mtk driver fixes
- sc16is7xx driver bugfix
- new 8250_exar device ids added
All of these have been in linux-next this past week with no reported
issues"
* tag 'tty-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: 8250_mtk: Enable baud clock and manage in runtime PM
serial: 8250_dw: handle reset control deassert error
dt-bindings: serial: sh-sci: Fix r8a78000 interrupts
serial: sc16is7xx: remove useless enable of enhanced features
serial: 8250_exar: add support for Advantech 2 port card with Device ID 0x0018
tty: serial: sh-sci: fix RSCI FIFO overrun handling
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB driver fixes from Greg KH:
"Here are some small USB driver fixes and new device ids for 6.18-rc3.
Included in here are:
- new option serial driver device ids added
- dt bindings fixes for numerous platforms
- xhci bugfixes for many reported regressions
- usbio dependency bugfix
- dwc3 driver fix
- raw-gadget bugfix
All of these have been in linux-next this week with no reported issues"
* tag 'usb-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: serial: option: add Telit FN920C04 ECM compositions
USB: serial: option: add Quectel RG255C
tcpm: switch check for role_sw device with fw_node
usb/core/quirks: Add Huawei ME906S to wakeup quirk
usb: raw-gadget: do not limit transfer length
USB: serial: option: add UNISOC UIS7720
xhci: dbc: enable back DbC in resume if it was enabled before suspend
xhci: dbc: fix bogus 1024 byte prefix if ttyDBC read races with stall event
usb: xhci-pci: Fix USB2-only root hub registration
dt-bindings: usb: qcom,snps-dwc3: Fix bindings for X1E80100
usb: misc: Add x86 dependency for Intel USBIO driver
dt-bindings: usb: switch: split out ports definition
usb: dwc3: Don't call clk_bulk_disable_unprepare() twice
dt-bindings: usb: dwc3-imx8mp: dma-range is required only for imx8mp
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A moderately large collection of device specific changes here, mostly
fixes but also including a few new quirks and device IDs. This is all
fairly routine even for the affected devices"
* tag 'spi-fix-v6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: dt-bindings: spi-rockchip: Add RK3506 compatible
spi: intel-pci: Add support for Intel Wildcat Lake SPI serial flash
spi: intel-pci: Add support for Arrow Lake-H SPI serial flash
spi: intel: Add support for 128M component density
spi: airoha: fix reading/writing of flashes with more than one plane per lun
spi: airoha: switch back to non-dma mode in the case of error
spi: airoha: add support of dual/quad wires spi modes to exec_op() handler
spi: airoha: return an error for continuous mode dirmap creation cases
spi: amlogic: fix spifc build error
spi: cadence-quadspi: Fix pm_runtime unbalance on dma EPROBE_DEFER
spi: spi-nxp-fspi: limit the clock rate for different sample clock source selection
spi: spi-nxp-fspi: add extra delay after dll locked
spi: spi-nxp-fspi: re-config the clock rate when operation require new clock rate
spi: dw-mmio: add error handling for reset_control_deassert()
spi: rockchip-sfc: Fix DMA-API usage
spi: dt-bindings: cadence: add soc-specific compatible strings for zynqmp and versal-net
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from can. Slim pickings, I'm guessing people haven't
really started testing.
Current release - new code bugs:
- eth: mlx5e:
- psp: avoid 'accel' NULL pointer dereference
- skip PPHCR register query for FEC histogram if not supported
Previous releases - regressions:
- bonding: update the slave array for broadcast mode
- rtnetlink: re-allow deleting FDB entries in user namespace
- eth: dpaa2: fix the pointer passed to PTR_ALIGN on Tx path
Previous releases - always broken:
- can: drop skb on xmit if device is in listen-only mode
- gro: clear skb_shinfo(skb)->hwtstamps in napi_reuse_skb()
- eth: mlx5e
- RX, fix generating skb from non-linear xdp_buff if program
trims frags
- make devcom init failures non-fatal, fix races with IPSec
Misc:
- some documentation formatting 'fixes'"
* tag 'net-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
net/mlx5: Fix IPsec cleanup over MPV device
net/mlx5: Refactor devcom to return NULL on failure
net/mlx5e: Skip PPHCR register query if not supported by the device
net/mlx5: Add PPHCR to PCAM supported registers mask
virtio-net: zero unused hash fields
net: phy: micrel: always set shared->phydev for LAN8814
vsock: fix lock inversion in vsock_assign_transport()
ovpn: use datagram_poll_queue for socket readiness in TCP
espintcp: use datagram_poll_queue for socket readiness
net: datagram: introduce datagram_poll_queue for custom receive queues
net: bonding: fix possible peer notify event loss or dup issue
net: hsr: prevent creation of HSR device with slaves from another netns
sctp: avoid NULL dereference when chunk data buffer is missing
ptp: ocp: Fix typo using index 1 instead of i in SMA initialization loop
net: ravb: Ensure memory write completes before ringing TX doorbell
net: ravb: Enforce descriptor type ordering
net: hibmcge: select FIXED_PHY
net: dlink: use dev_kfree_skb_any instead of dev_kfree_skb
Documentation: networking: ax25: update the mailing list info.
net: gro_cells: fix lock imbalance in gro_cells_receive()
...
|
|
The "groups" property can hold multiple entries (e.g.
toshiba/tmpv7708-rm-mbrc.dts file), so allow that by dropping incorrect
type (pinmux-node.yaml schema already defines that as string-array) and
adding constraints for items. This fixes dtbs_check warnings like:
toshiba/tmpv7708-rm-mbrc.dtb: pinctrl@24190000 (toshiba,tmpv7708-pinctrl):
pwm-pins:groups: ['pwm0_gpio16_grp', 'pwm1_gpio17_grp', 'pwm2_gpio18_grp', 'pwm3_gpio19_grp'] is too long
Fixes: 1825c1fe0057 ("pinctrl: Add DT bindings for Toshiba Visconti TMPV7700 SoC")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"All driver fixes. The big change is the storvsc one to rejig the
hyper-v channel handling to be more efficient for SMP virtual
machines"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: phy: dt-bindings: Add QMP UFS PHY compatible for Kaanapali
scsi: ufs: qcom: dt-bindings: Document the Kaanapali UFS controller
scsi: libfc: Prevent integer overflow in fc_fcp_recv_data()
scsi: qla4xxx: Fix typos in comments
scsi: storvsc: Prefer returning channel with the same CPU as on the I/O issuing CPU
|
|
The SPI controller found in the RK3506 SoC is still compatible to the
original one introduced with the RK3066, so add the RK3506 compatible
to the list of its variants.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20251022004200.204276-1-heiko@sntech.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The SCIF instances on R-Car Gen5 have a single interrupt, just like on
other R-Car SoCs.
Fixes: 6ac1d60473727931 ("dt-bindings: serial: sh-sci: Document r8a78000 bindings")
Cc: stable <stable@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/09bc9881b31bdb948ce8b69a2b5acf633f5505a4.1759920441.git.geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Update the mailing list subscription information for the linux-hams
mailing list.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251020052716.3136773-1-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull rustfmt fixes from Miguel Ojeda:
"Rust 'rustfmt' cleanup
'rustfmt', by default, formats imports in a way that is prone to
conflicts while merging and rebasing, since in some cases it condenses
several items into the same line.
Document in our guidelines that we will handle this for the moment
with the trailing empty comment workaround and make the tree
'rustfmt'-clean again"
* tag 'rust-rustfmt' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
rust: bitmap: fix formatting
rust: cpufreq: fix formatting
rust: alloc: employ a trailing comment to keep vertical layout
docs: rust: add section on imports formatting
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Fix the handling of ZCR_EL2 in NV VMs
- Pick the correct translation regime when doing a PTW on the back of
a SEA
- Prevent userspace from injecting an event into a vcpu that isn't
initialised yet
- Move timer save/restore to the sysreg handling code, fixing EL2
timer access in the process
- Add FGT-based trapping of MDSCR_EL1 to reduce the overhead of debug
- Fix trapping configuration when the host isn't GICv3
- Improve the detection of HCR_EL2.E2H being RES1
- Drop a spurious 'break' statement in the S1 PTW
- Don't try to access SPE when owned by EL3
Documentation updates:
- Document the failure modes of event injection
- Document that a GICv3 guest can be created on a GICv5 host with
FEAT_GCIE_LEGACY
Selftest improvements:
- Add a selftest for the effective value of HCR_EL2.AMO
- Address build warning in the timer selftest when building with
clang
- Teach irqfd selftests about non-x86 architectures
- Add missing sysregs to the set_id_regs selftest
- Fix vcpu allocation in the vgic_lpi_stress selftest
- Correctly enable interrupts in the vgic_lpi_stress selftest
x86:
- Expand the KVM_PRE_FAULT_MEMORY selftest to add a regression test
for the bug fixed by commit 3ccbf6f47098 ("KVM: x86/mmu: Return
-EAGAIN if userspace deletes/moves memslot during prefault")
- Don't try to get PMU capabilities from perf when running a CPU with
hybrid CPUs/PMUs, as perf will rightly WARN.
guest_memfd:
- Rework KVM_CAP_GUEST_MEMFD_MMAP (newly introduced in 6.18) into a
more generic KVM_CAP_GUEST_MEMFD_FLAGS
- Add a guest_memfd INIT_SHARED flag and require userspace to
explicitly set said flag to initialize memory as SHARED,
irrespective of MMAP.
The behavior merged in 6.18 is that enabling mmap() implicitly
initializes memory as SHARED, which would result in an ABI
collision for x86 CoCo VMs as their memory is currently always
initialized PRIVATE.
- Allow mmap() on guest_memfd for x86 CoCo VMs, i.e. on VMs with
private memory, to enable testing such setups, i.e. to hopefully
flush out any other lurking ABI issues before 6.18 is officially
released.
- Add testcases to the guest_memfd selftest to cover guest_memfd
without MMAP, and host userspace accesses to mmap()'d private
memory"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (46 commits)
arm64: Revamp HCR_EL2.E2H RES1 detection
KVM: arm64: nv: Use FGT write trap of MDSCR_EL1 when available
KVM: arm64: Compute per-vCPU FGTs at vcpu_load()
KVM: arm64: selftests: Fix misleading comment about virtual timer encoding
KVM: arm64: selftests: Add an E2H=0-specific configuration to get_reg_list
KVM: arm64: selftests: Make dependencies on VHE-specific registers explicit
KVM: arm64: Kill leftovers of ad-hoc timer userspace access
KVM: arm64: Fix WFxT handling of nested virt
KVM: arm64: Move CNT*CT_EL0 userspace accessors to generic infrastructure
KVM: arm64: Move CNT*_CVAL_EL0 userspace accessors to generic infrastructure
KVM: arm64: Move CNT*_CTL_EL0 userspace accessors to generic infrastructure
KVM: arm64: Add timer UAPI workaround to sysreg infrastructure
KVM: arm64: Make timer_set_offset() generally accessible
KVM: arm64: Replace timer context vcpu pointer with timer_id
KVM: arm64: Introduce timer_context_to_vcpu() helper
KVM: arm64: Hide CNTHV_*_EL2 from userspace for nVHE guests
Documentation: KVM: Update GICv3 docs for GICv5 hosts
KVM: arm64: gic-v3: Only set ICH_HCR traps for v2-on-v3 or v3 guests
KVM: arm64: selftests: Actually enable IRQs in vgic_lpi_stress
KVM: arm64: selftests: Allocate vcpus with correct size
...
|
|
KVM x86 fixes for 6.18:
- Expand the KVM_PRE_FAULT_MEMORY selftest to add a regression test for the
bug fixed by commit 3ccbf6f47098 ("KVM: x86/mmu: Return -EAGAIN if userspace
deletes/moves memslot during prefault")
- Don't try to get PMU capabbilities from perf when running a CPU with hybrid
CPUs/PMUs, as perf will rightly WARN.
- Rework KVM_CAP_GUEST_MEMFD_MMAP (newly introduced in 6.18) into a more
generic KVM_CAP_GUEST_MEMFD_FLAGS
- Add a guest_memfd INIT_SHARED flag and require userspace to explicitly set
said flag to initialize memory as SHARED, irrespective of MMAP. The
behavior merged in 6.18 is that enabling mmap() implicitly initializes
memory as SHARED, which would result in an ABI collision for x86 CoCo VMs
as their memory is currently always initialized PRIVATE.
- Allow mmap() on guest_memfd for x86 CoCo VMs, i.e. on VMs with private
memory, to enable testing such setups, i.e. to hopefully flush out any
other lurking ABI issues before 6.18 is officially released.
- Add testcases to the guest_memfd selftest to cover guest_memfd without MMAP,
and host userspace accesses to mmap()'d private memory.
|
|
reattach-vf.sh code blocks marker
cloud-ifupdown-helper patch and reattach-vf.sh script are rendered in
htmldocs output as normal paragraphs instead of literal code blocks
due to missing separator from respective code block marker. Add it.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251016093936.29442-2-bagasdotme@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes. All changes are rather boring
device-specific fixes and quirks:
- A few fixes for missing NULL checks
- ASoC NAU8821 fixes for jack and irq handling
- Various fixes for ASoC TAS2781, IDT821034, sc8280xp, max9809x,
wcd938x, and SoundWire
- Usual HD-audio and USB-audio quirks"
* tag 'sound-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (27 commits)
ALSA: hda/realtek: Fix mute led for HP Omen 17-cb0xxx
ALSA: usb-audio: fix vendor quirk for Logitech H390
ALSA: usb-audio: add volume quirks for MS LifeChat LX-3000
ASoC: amd/sdw_utils: avoid NULL deref when devm_kasprintf() fails
ASoC: max98090/91: fixed max98091 ALSA widget powering up/down
ASoC: dt-bindings: Add compatible string fsl,imx-audio-tlv320
ASoC: codecs: wcd938x-sdw: remove redundant runtime pm calls
ASoC: sdw_utils: add rt1321 part id to codec_info_list
ALSA: usb-audio: Fix NULL pointer deference in try_to_register_card
ALSA: firewire: amdtp-stream: fix enum kernel-doc warnings
ALSA: usb-audio: add mixer_playback_min_mute quirk for Logitech H390
ASoC: nau8821: Avoid unnecessary blocking in IRQ handler
ASoC: nau8821: Add DMI quirk to bypass jack debounce circuit
ASoC: nau8821: Consistently clear interrupts before unmasking
ASoC: nau8821: Generalize helper to clear IRQ status
ASoC: nau8821: Cancel jdet_work before handling jack ejection
ASoC: codecs: Fix gain setting ranges for Renesas IDT821034 codec
ASoC: tas2781: Update ti,tas2781.yaml for adding tas58xx
ASoC: tas2781: Support more newly-released amplifiers tas58xx in the driver
ASoC: qcom: sc8280xp: Add support for QCS615
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
- PM cleanup after all prerequisites are merged with rc1
- usbio: missing addition after all dependencies are in
- slimpro: DT binding schema conversion
* tag 'i2c-for-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
dt-bindings: i2c: Convert apm,xgene-slimpro-i2c to DT schema
i2c: usbio: Add ACPI device-id for MTL-CVF devices
i2c: Remove redundant pm_runtime_mark_last_busy() calls
|
|
`rustfmt`, by default, formats imports in a way that is prone to conflicts
while merging and rebasing, since in some cases it condenses several
items into the same line.
For instance, Linus mentioned [1] that the following case:
use crate::{
fmt,
page::AsPageIter,
};
is compressed by `rustfmt` into:
use crate::{fmt, page::AsPageIter};
which is undesirable.
Similarly, `rustfmt` may put several items in the same line even if the
braces span already multiple lines, e.g.:
use kernel::{
acpi, c_str,
device::{property, Core},
of, platform,
};
The options that control the formatting behavior around imports are
generally unstable, and `rustfmt` releases do not allow to use nightly
features, unlike the compiler and other Rust tooling [2].
For the moment, we can introduce a workaround to prevent `rustfmt`
from compressing the example above -- the "trailing empty comment":
use crate::{
fmt,
page::AsPageIter, //
};
which is reminiscent of the trailing comma behavior in other formatters.
We already used empty comments for formatting purposes in the past,
e.g. in commit b9b701fce49a ("rust: clarify the language unstable features
in use").
In addition, `rustfmt` actually reformats with a vertical layout (i.e. it
does not put two items in the same line) when seeing such a comment,
i.e. it doesn't just preserve the formatting, which is good in the sense
that we can use it to easily reformat some imports, since it matches
the style we generally want to have.
A Git merge driver would help (suggested by Gary and Wedson), though
maintainers would need to set it up, the diffs would still be larger
and the formatting rules for imports would remain hard to predict.
Thus document the style that we will follow in the coding guidelines
by introducing a new section and explain how the trailing empty comment
works there too.
We discussed the issue with upstream Rust in our usual Rust <-> Rust
for Linux meeting [3], and there have also been a few other discussions
in parallel in issues [4][5] and Zulip [6]. We will see what happens,
but upstream Rust has already created a subteam of `rustfmt` to try
to overcome the bandwidth issue [7], which is a good signal, and some
organization work has already started (e.g. tracking issues). We will
continue our discussions with them about it.
Cc: Caleb Cartwright <caleb.cartwright@outlook.com>
Cc: Yacin Tmimi <yacintmimi@gmail.com>
Cc: Manish Goregaokar <manishsmail@gmail.com>
Cc: Deadbeef <ent3rm4n@gmail.com>
Cc: Cameron Steffen <cam.steffen94@gmail.com>
Cc: Jieyou Xu <jieyouxu@outlook.com>
Link: https://lore.kernel.org/all/CAHk-=wgO7S_FZUSBbngG5vtejWOpzDfTTBkVvP3_yjJmFddbzA@mail.gmail.com/ [1]
Link: https://github.com/rust-lang/rustfmt/issues/4884 [2]
Link: https://hackmd.io/iSCyY3JTTz-g8YM-nnzTTA [3]
Link: https://github.com/rust-lang/rustfmt/issues/4991 [4]
Link: https://github.com/rust-lang/rustfmt/issues/3361 [5]
Link: https://rust-lang.zulipchat.com/#narrow/channel/392734-council/topic/rustfmt.20maintenance/near/543815381 [6]
Link: https://github.com/rust-lang/team/pull/2017 [7]
Reviewed-by: Benno Lossin <lossin@kernel.org>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Packet format for checksum offload header v5 and aggregation, and header
type table for the former, are shown in normal paragraphs instead.
Use appropriate markup.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251015092540.32282-2-bagasdotme@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from CAN
Current release - regressions:
- udp: do not use skb_release_head_state() before
skb_attempt_defer_free()
- gro_cells: use nested-BH locking for gro_cell
- dpll: zl3073x: increase maximum size of flash utility
Previous releases - regressions:
- core: fix lockdep splat on device unregister
- tcp: fix tcp_tso_should_defer() vs large RTT
- tls:
- don't rely on tx_work during send()
- wait for pending async decryptions if tls_strp_msg_hold fails
- can: j1939: add missing calls in NETDEV_UNREGISTER notification
handler
- eth: lan78xx: fix lost EEPROM write timeout in
lan78xx_write_raw_eeprom
Previous releases - always broken:
- ip6_tunnel: prevent perpetual tunnel growth
- dpll: zl3073x: handle missing or corrupted flash configuration
- can: m_can: fix pm_runtime and CAN state handling
- eth:
- ixgbe: fix too early devlink_free() in ixgbe_remove()
- ixgbevf: fix mailbox API compatibility
- gve: Check valid ts bit on RX descriptor before hw timestamping
- idpf: cleanup remaining SKBs in PTP flows
- r8169: fix packet truncation after S4 resume on RTL8168H/RTL8111H"
* tag 'net-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (50 commits)
udp: do not use skb_release_head_state() before skb_attempt_defer_free()
net: usb: lan78xx: fix use of improperly initialized dev->chipid in lan78xx_reset
netdevsim: set the carrier when the device goes up
selftests: tls: add test for short splice due to full skmsg
selftests: net: tls: add tests for cmsg vs MSG_MORE
tls: don't rely on tx_work during send()
tls: wait for pending async decryptions if tls_strp_msg_hold fails
tls: always set record_type in tls_process_cmsg
tls: wait for async encrypt in case of error during latter iterations of sendmsg
tls: trim encrypted message to match the plaintext on short splice
tg3: prevent use of uninitialized remote_adv and local_adv variables
MAINTAINERS: new entry for IPv6 IOAM
gve: Check valid ts bit on RX descriptor before hw timestamping
net: core: fix lockdep splat on device unregister
MAINTAINERS: add myself as maintainer for b53
selftests: net: check jq command is supported
net: airoha: Take into account out-of-order tx completions in airoha_dev_xmit()
tcp: fix tcp_tso_should_defer() vs large RTT
r8152: add error handling in rtl8152_driver_init
usbnet: Fix using smp_processor_id() in preemptible code warnings
...
|
|
Merge series from Le Qi <le.qi@oss.qualcomm.com>:
This patch series adds support for the QCS615 sound card:
- Updates device tree bindings for SM8250 to include QCS615.
- Adds QCS615 support in the SC8280XP ASoC driver.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2025-10-14
The first 2 paches are by Celeste Liu and target the gS_usb driver.
The first patch remove the limitation to 3 CAN interface per USB
device. The second patch adds the missing population of
net_device->dev_port.
The next 4 patches are by me and fix the m_can driver. They add a
missing pm_runtime_disable(), fix the CAN state transition back to
Error Active and fix the state after ifup and suspend/resume.
Another patch by me targets the m_can driver, too and replaces Dong
Aisheng's old email address.
The next 2 patches are by Vincent Mailhol and update the CAN
networking Documentation.
Tetsuo Handa contributes the last patch that add missing cleanup calls
in the NETDEV_UNREGISTER notification handler.
* tag 'linux-can-fixes-for-6.18-20251014' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: j1939: add missing calls in NETDEV_UNREGISTER notification handler
can: add Transmitter Delay Compensation (TDC) documentation
can: remove false statement about 1:1 mapping between DLC and length
can: m_can: replace Dong Aisheng's old email address
can: m_can: fix CAN state in system PM
can: m_can: m_can_chip_config(): bring up interface in correct state
can: m_can: m_can_handle_state_errors(): fix CAN state transition to Error Active
can: m_can: m_can_plat_remove(): add missing pm_runtime_disable()
can: gs_usb: gs_make_candev(): populate net_device->dev_port
can: gs_usb: increase max interface to U8_MAX
====================
Link: https://patch.msgid.link/20251014122140.990472-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add compatible string fsl,imx-audio-tlv320 to fix below CHECK_DTBS warning:
arch/arm/boot/dts/nxp/imx/imx6dl-gw5903.dtb: /sound: failed to match any schema with compatible: ['fsl,imx-audio-tlv320']
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251010160321.2130093-1-Frank.Li@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 bug fixes from Ted Ts'o:
- Fix regression caused by removing CONFIG_EXT3_FS when testing some
very old defconfigs
- Avoid a BUG_ON when opening a file on a maliciously corrupted file
system
- Avoid mm warnings when freeing a very large orphan file metadata
- Avoid a theoretical races between metadata writeback and checkpoints
(it's very hard to hit in practice, since the race requires that the
writeback take a very long time)
* tag 'ext4_for_linus-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
Use CONFIG_EXT4_FS instead of CONFIG_EXT3_FS in all of the defconfigs
ext4: free orphan info with kvfree
ext4: detect invalid INLINE_DATA + EXTENTS flag combination
ext4, doc: fix and improve directory hash tree description
ext4: wait for ongoing I/O to complete before freeing blocks
jbd2: ensure that all ongoing I/O complete before freeing blocks
|
|
Convert APM X-Gene slimpro-i2c binding to DT schema format. It's a
straight-forward conversion.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Pull in outstanding SCSI fixes for 6.18.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Back in 2021, support for CAN TDC was added to the kernel in series [1]
and in iproute2 in series [2]. However, the documentation was never
updated.
Add a new sub-section under CAN-FD driver support to document how to
configure the TDC using the "ip tool".
[1] add the netlink interface for CAN-FD Transmitter Delay Compensation (TDC)
Link: https://lore.kernel.org/all/20210918095637.20108-1-mailhol.vincent@wanadoo.fr/
[2] iplink_can: cleaning, fixes and adding TDC support
Link: https://lore.kernel.org/all/20211103164428.692722-1-mailhol.vincent@wanadoo.fr/
Signed-off-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20251013-can-fd-doc-v2-2-5d53bdc8f2ad@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The CAN-FD section of can.rst still states that there is a 1:1 mapping
between the Classical CAN DLC and its length. This is only true for
the DLC values up to 8. Beyond that point, the length remains at 8.
For reference, the mapping between the CAN DLC and the length is given
in below table [1]:
DLC value CBFF and CEFF FBFF and FEFF
[decimal] [byte] [byte]
----------------------------------------------
0 0 0
1 1 1
2 2 2
3 3 3
4 4 4
5 5 5
6 6 6
7 7 7
8 8 8
9 8 12
10 8 16
11 8 20
12 8 24
13 8 32
14 8 48
15 8 64
Remove the erroneous statement. Instead just state that the length of
a Classical CAN frame ranges from 0 to 8.
[1] ISO 11898-1:2024, Table 5 -- DLC: coding of the four LSB
Signed-off-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20251013-can-fd-doc-v2-1-5d53bdc8f2ad@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
GICv5 hosts optionally include FEAT_GCIE_LEGACY, which allows them to
execute GICv3-based VMs on GICv5 hardware. Update the GICv3
documentation to reflect this now that GICv3 guests are supports on
compatible GICv5 hosts.
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
KVM rejects calls to KVM_{GET,SET}_VCPU_EVENTS for an uninitialized vCPU
as of commit cc96679f3c03 ("KVM: arm64: Prevent access to vCPU events
before init"). Update the corresponding API documentation.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Ensure my CI has a sensible baseline.
|
|
Update ti,tas2781.yaml for adding TAS5802/TAS5815/TAS5828.
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Link: https://patch.msgid.link/20251002072925.26242-2-baojun.xu@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add bindings for QCS615 sound card, which looks fully
compatible with existing SM8250.
Signed-off-by: Le Qi <le.qi@oss.qualcomm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20251009090619.1097388-2-le.qi@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
