| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit 9aeed9041929812a10a6d693af050846942a1d16 ]
Similar in nature to ab107276607af90b13a5994997e19b7b9731e251. glibc-2.42
drops the legacy termio struct, but the ioctls.h header still defines some
TC* constants in terms of termio (via sizeof). Hardcode the values instead.
This fixes building Python for example, which falls over like:
./Modules/termios.c:1119:16: error: invalid application of 'sizeof' to incomplete type 'struct termio'
Link: https://bugs.gentoo.org/961769
Link: https://bugs.gentoo.org/962600
Signed-off-by: Sam James <sam@gentoo.org>
Reviewed-by: Magnus Lindholm <linmag7@gmail.com>
Link: https://lore.kernel.org/r/6ebd3451908785cad53b50ca6bc46cfe9d6bc03c.1764922497.git.sam@gentoo.org
Signed-off-by: Magnus Lindholm <linmag7@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 0a0f7362b0367634a2d5cb7c96226afc116f19c9 upstream.
The problem is that GCC expects 16-byte alignment of the incoming stack
since early 2004, as Maciej found out [1]:
Having actually dug speculatively I can see that the psABI was changed in
GCC 3.5 with commit e5e10fb4a350 ("re PR target/14539 (128-bit long double
improperly aligned)") back in Mar 2004, when the stack pointer alignment
was increased from 8 bytes to 16 bytes, and arch/alpha/kernel/entry.S has
various suspicious stack pointer adjustments, starting with SP_OFF which
is not a whole multiple of 16.
Also, as Magnus noted, "ALPHA Calling Standard" [2] required the same:
D.3.1 Stack Alignment
This standard requires that stacks be octaword aligned at the time a
new procedure is invoked.
However:
- the "normal" kernel stack is always misaligned by 8 bytes, thanks to
the odd number of 64-bit words in 'struct pt_regs', which is the very
first thing pushed onto the kernel thread stack;
- syscall, fault, interrupt etc. handlers may, or may not, receive aligned
stack depending on numerous factors.
Somehow we got away with it until recently, when we ended up with
a stack corruption in kernel/smp.c:smp_call_function_single() due to
its use of 32-byte aligned local data and the compiler doing clever
things allocating it on the stack.
This adds padding between the PAL-saved and kernel-saved registers
so that 'struct pt_regs' have an even number of 64-bit words.
This makes the stack properly aligned for most of the kernel
code, except two handlers which need special threatment.
Note: struct pt_regs doesn't belong in uapi/asm; this should be fixed,
but let's put this off until later.
Link: https://lore.kernel.org/rcu/alpine.DEB.2.21.2501130248010.18889@angie.orcam.me.uk/ [1]
Link: https://bitsavers.org/pdf/dec/alpha/Alpha_Calling_Standard_Rev_2.0_19900427.pdf [2]
Cc: stable@vger.kernel.org
Tested-by: Maciej W. Rozycki <macro@orcam.me.uk>
Tested-by: Magnus Lindholm <linmag7@gmail.com>
Tested-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Ivan Kokshaysky <ink@unseen.parts>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This idea was introduced by David Rientjes[1].
Introduce a new madvise mode, MADV_COLLAPSE, that allows users to request
a synchronous collapse of memory at their own expense.
The benefits of this approach are:
* CPU is charged to the process that wants to spend the cycles for the
THP
* Avoid unpredictable timing of khugepaged collapse
Semantics
This call is independent of the system-wide THP sysfs settings, but will
fail for memory marked VM_NOHUGEPAGE. If the ranges provided span
multiple VMAs, the semantics of the collapse over each VMA is independent
from the others. This implies a hugepage cannot cross a VMA boundary. If
collapse of a given hugepage-aligned/sized region fails, the operation may
continue to attempt collapsing the remainder of memory specified.
The memory ranges provided must be page-aligned, but are not required to
be hugepage-aligned. If the memory ranges are not hugepage-aligned, the
start/end of the range will be clamped to the first/last hugepage-aligned
address covered by said range. The memory ranges must span at least one
hugepage-sized region.
All non-resident pages covered by the range will first be
swapped/faulted-in, before being internally copied onto a freshly
allocated hugepage. Unmapped pages will have their data directly
initialized to 0 in the new hugepage. However, for every eligible
hugepage aligned/sized region to-be collapsed, at least one page must
currently be backed by memory (a PMD covering the address range must
already exist).
Allocation for the new hugepage may enter direct reclaim and/or
compaction, regardless of VMA flags. When the system has multiple NUMA
nodes, the hugepage will be allocated from the node providing the most
native pages. This operation operates on the current state of the
specified process and makes no persistent changes or guarantees on how
pages will be mapped, constructed, or faulted in the future
Return Value
If all hugepage-sized/aligned regions covered by the provided range were
either successfully collapsed, or were already PMD-mapped THPs, this
operation will be deemed successful. On success, process_madvise(2)
returns the number of bytes advised, and madvise(2) returns 0. Else, -1
is returned and errno is set to indicate the error for the most-recently
attempted hugepage collapse. Note that many failures might have occurred,
since the operation may continue to collapse in the event a single
hugepage-sized/aligned region fails.
ENOMEM Memory allocation failed or VMA not found
EBUSY Memcg charging failed
EAGAIN Required resource temporarily unavailable. Try again
might succeed.
EINVAL Other error: No PMD found, subpage doesn't have Present
bit set, "Special" page no backed by struct page, VMA
incorrectly sized, address not page-aligned, ...
Most notable here is ENOMEM and EBUSY (new to madvise) which are intended
to provide the caller with actionable feedback so they may take an
appropriate fallback measure.
Use Cases
An immediate user of this new functionality are malloc() implementations
that manage memory in hugepage-sized chunks, but sometimes subrelease
memory back to the system in native-sized chunks via MADV_DONTNEED;
zapping the pmd. Later, when the memory is hot, the implementation could
madvise(MADV_COLLAPSE) to re-back the memory by THPs to regain hugepage
coverage and dTLB performance. TCMalloc is such an implementation that
could benefit from this[2].
Only privately-mapped anon memory is supported for now, but additional
support for file, shmem, and HugeTLB high-granularity mappings[2] is
expected. File and tmpfs/shmem support would permit:
* Backing executable text by THPs. Current support provided by
CONFIG_READ_ONLY_THP_FOR_FS may take a long time on a large system which
might impair services from serving at their full rated load after
(re)starting. Tricks like mremap(2)'ing text onto anonymous memory to
immediately realize iTLB performance prevents page sharing and demand
paging, both of which increase steady state memory footprint. With
MADV_COLLAPSE, we get the best of both worlds: Peak upfront performance
and lower RAM footprints.
* Backing guest memory by hugapages after the memory contents have been
migrated in native-page-sized chunks to a new host, in a
userfaultfd-based live-migration stack.
[1] https://lore.kernel.org/linux-mm/d098c392-273a-36a4-1a29-59731cdf5d3d@google.com/
[2] https://github.com/google/tcmalloc/tree/master/tcmalloc
[jrdr.linux@gmail.com: avoid possible memory leak in failure path]
Link: https://lkml.kernel.org/r/20220713024109.62810-1-jrdr.linux@gmail.com
[zokeefe@google.com add missing kfree() to madvise_collapse()]
Link: https://lore.kernel.org/linux-mm/20220713024109.62810-1-jrdr.linux@gmail.com/
Link: https://lkml.kernel.org/r/20220713161851.1879439-1-zokeefe@google.com
[zokeefe@google.com: delay computation of hpage boundaries until use]]
Link: https://lkml.kernel.org/r/20220720140603.1958773-4-zokeefe@google.com
Link: https://lkml.kernel.org/r/20220706235936.2197195-10-zokeefe@google.com
Signed-off-by: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: "Souptick Joarder (HPE)" <jrdr.linux@gmail.com>
Suggested-by: David Rientjes <rientjes@google.com>
Cc: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Chris Kennelly <ckennelly@google.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: David Hildenbrand <david@redhat.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Pavel Begunkov <asml.silence@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rongwei Wang <rongwei.wang@linux.alibaba.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty and serial driver updates from Greg KH:
"Here is the big set of tty and serial driver updates for 5.19-rc1.
Lots of tiny cleanups in here, the major stuff is:
- termbit cleanups and unification by Ilpo. A much needed change that
goes a long way to making things simpler for all of the different
arches
- tty documentation cleanups and movements to their own place in the
documentation tree
- old tty driver cleanups and fixes from Jiri to bring some existing
drivers into the modern world
- RS485 cleanups and unifications to make it easier for individual
drivers to support this mode instead of having to duplicate logic
in each driver
- Lots of 8250 driver updates and additions
- new device id additions
- n_gsm continued fixes and cleanups
- other minor serial driver updates and cleanups
All of these have been in linux-next for weeks with no reported issues"
* tag 'tty-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (166 commits)
tty: Rework receive flow control char logic
pcmcia: synclink_cs: Don't allow CS5-6
serial: stm32-usart: Correct CSIZE, bits, and parity
serial: st-asc: Sanitize CSIZE and correct PARENB for CS7
serial: sifive: Sanitize CSIZE and c_iflag
serial: sh-sci: Don't allow CS5-6
serial: txx9: Don't allow CS5-6
serial: rda-uart: Don't allow CS5-6
serial: digicolor-usart: Don't allow CS5-6
serial: uartlite: Fix BRKINT clearing
serial: cpm_uart: Fix build error without CONFIG_SERIAL_CPM_CONSOLE
serial: core: Do stop_rx in suspend path for console if console_suspend is disabled
tty: serial: qcom-geni-serial: Remove uart frequency table. Instead, find suitable frequency with call to clk_round_rate.
dt-bindings: serial: renesas,em-uart: Add RZ/V2M clock to access the registers
serial: 8250_fintek: Check SER_RS485_RTS_* only with RS485
Revert "serial: 8250_mtk: Make sure to select the right FEATURE_SEL"
serial: msm_serial: disable interrupts in __msm_console_write()
serial: meson: acquire port->lock in startup()
serial: 8250_dw: Use dev_err_probe()
serial: 8250_dw: Use devm_add_action_or_reset()
...
|
|
Nothing in termbits seems to require anything from linux/posix_types.h.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220509093446.6677-4-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
- Align c_cc defines.
- Remove extra newlines.
- Realign & adjust number of leading zeros.
- Reorder c_cflag defines to ascending order
- Make comment ending shorted (=remove period and one extra space from
the comments in mips).
Co-developed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220509093446.6677-3-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Some defines are the same across all archs. Move the most obvious
intersection to termbits-common.h.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220509093446.6677-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Many archs have termbits.h as octal numbers. It makes hard for humans
to parse the magnitude of large numbers correctly and to compare with
hex ones of the same define.
Convert octal values to hex.
First step is an automated conversion with:
for i in $(git ls-files | grep 'termbits\.h'); do
awk --non-decimal-data '/^#define\s+[A-Z][A-Z0-9]*\s+0[0-9]/ {
l=int(((length($3) - 1) * 3 + 3) / 4);
repl = sprintf("0x%0" l "x", $3);
print gensub(/[^[:blank:]]+/, repl, 3);
next} {print}' $i > $i~;
mv $i~ $i;
done
On top of that, some manual processing on alignment and number of zeros.
In addition, small tweaks to formatting of a few comments on the same
lines.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Link: https://lore.kernel.org/r/2c8c96f-a12f-aadc-18ac-34c1d371929c@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Adding a new socket option, SO_RCVMARK, to indicate that SO_MARK
should be included in the ancillary data returned by recvmsg().
Renamed the sock_recv_ts_and_drops() function to sock_recv_cmsgs().
Signed-off-by: Erin MacNeil <lnx.erin@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/r/20220427200259.2564-1-lnx.erin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
MADV_DONTNEED historically rejects mlocked ranges, but with MLOCK_ONFAULT
and MCL_ONFAULT allowing to mlock without populating, there are valid use
cases for depopulating locked ranges as well.
Users mlock memory to protect secrets. There are allocators for secure
buffers that want in-use memory generally mlocked, but cleared and
invalidated memory to give up the physical pages. This could be done with
explicit munlock -> mlock calls on free -> alloc of course, but that adds
two unnecessary syscalls, heavy mmap_sem write locks, vma splits and
re-merges - only to get rid of the backing pages.
Users also mlockall(MCL_ONFAULT) to suppress sustained paging, but are
okay with on-demand initial population. It seems valid to selectively
free some memory during the lifetime of such a process, without having to
mess with its overall policy.
Why add a separate flag? Isn't this a pretty niche usecase?
- MADV_DONTNEED has been bailing on locked vmas forever. It's at least
conceivable that someone, somewhere is relying on mlock to protect
data from perhaps broader invalidation calls. Changing this behavior
now could lead to quiet data corruption.
- It also clarifies expectations around MADV_FREE and maybe
MADV_REMOVE. It avoids the situation where one quietly behaves
different than the others. MADV_FREE_LOCKED can be added later.
- The combination of mlock() and madvise() in the first place is
probably niche. But where it happens, I'd say that dropping pages
from a locked region once they don't contain secrets or won't page
anymore is much saner than relying on mlock to protect memory from
speculative or errant invalidation calls. It's just that we can't
change the default behavior because of the two previous points.
Given that, an explicit new flag seems to make the most sense.
[hannes@cmpxchg.org: fix mips build]
Link: https://lkml.kernel.org/r/20220304171912.305060-1-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"The sprinkling of SPI drivers is because we added a new one and Mark
sent us a SPI driver interface conversion pull request.
Core
----
- Introduce XDP multi-buffer support, allowing the use of XDP with
jumbo frame MTUs and combination with Rx coalescing offloads (LRO).
- Speed up netns dismantling (5x) and lower the memory cost a little.
Remove unnecessary per-netns sockets. Scope some lists to a netns.
Cut down RCU syncing. Use batch methods. Allow netdev registration
to complete out of order.
- Support distinguishing timestamp types (ingress vs egress) and
maintaining them across packet scrubbing points (e.g. redirect).
- Continue the work of annotating packet drop reasons throughout the
stack.
- Switch netdev error counters from an atomic to dynamically
allocated per-CPU counters.
- Rework a few preempt_disable(), local_irq_save() and busy waiting
sections problematic on PREEMPT_RT.
- Extend the ref_tracker to allow catching use-after-free bugs.
BPF
---
- Introduce "packing allocator" for BPF JIT images. JITed code is
marked read only, and used to be allocated at page granularity.
Custom allocator allows for more efficient memory use, lower iTLB
pressure and prevents identity mapping huge pages from getting
split.
- Make use of BTF type annotations (e.g. __user, __percpu) to enforce
the correct probe read access method, add appropriate helpers.
- Convert the BPF preload to use light skeleton and drop the
user-mode-driver dependency.
- Allow XDP BPF_PROG_RUN test infra to send real packets, enabling
its use as a packet generator.
- Allow local storage memory to be allocated with GFP_KERNEL if
called from a hook allowed to sleep.
- Introduce fprobe (multi kprobe) to speed up mass attachment (arch
bits to come later).
- Add unstable conntrack lookup helpers for BPF by using the BPF
kfunc infra.
- Allow cgroup BPF progs to return custom errors to user space.
- Add support for AF_UNIX iterator batching.
- Allow iterator programs to use sleepable helpers.
- Support JIT of add, and, or, xor and xchg atomic ops on arm64.
- Add BTFGen support to bpftool which allows to use CO-RE in kernels
without BTF info.
- Large number of libbpf API improvements, cleanups and deprecations.
Protocols
---------
- Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev.
- Adjust TSO packet sizes based on min_rtt, allowing very low latency
links (data centers) to always send full-sized TSO super-frames.
- Make IPv6 flow label changes (AKA hash rethink) more configurable,
via sysctl and setsockopt. Distinguish between server and client
behavior.
- VxLAN support to "collect metadata" devices to terminate only
configured VNIs. This is similar to VLAN filtering in the bridge.
- Support inserting IPv6 IOAM information to a fraction of frames.
- Add protocol attribute to IP addresses to allow identifying where
given address comes from (kernel-generated, DHCP etc.)
- Support setting socket and IPv6 options via cmsg on ping6 sockets.
- Reject mis-use of ECN bits in IP headers as part of DSCP/TOS.
Define dscp_t and stop taking ECN bits into account in fib-rules.
- Add support for locked bridge ports (for 802.1X).
- tun: support NAPI for packets received from batched XDP buffs,
doubling the performance in some scenarios.
- IPv6 extension header handling in Open vSwitch.
- Support IPv6 control message load balancing in bonding, prevent
neighbor solicitation and advertisement from using the wrong port.
Support NS/NA monitor selection similar to existing ARP monitor.
- SMC
- improve performance with TCP_CORK and sendfile()
- support auto-corking
- support TCP_NODELAY
- MCTP (Management Component Transport Protocol)
- add user space tag control interface
- I2C binding driver (as specified by DMTF DSP0237)
- Multi-BSSID beacon handling in AP mode for WiFi.
- Bluetooth:
- handle MSFT Monitor Device Event
- add MGMT Adv Monitor Device Found/Lost events
- Multi-Path TCP:
- add support for the SO_SNDTIMEO socket option
- lots of selftest cleanups and improvements
- Increase the max PDU size in CAN ISOTP to 64 kB.
Driver API
----------
- Add HW counters for SW netdevs, a mechanism for devices which
offload packet forwarding to report packet statistics back to
software interfaces such as tunnels.
- Select the default NIC queue count as a fraction of number of
physical CPU cores, instead of hard-coding to 8.
- Expose devlink instance locks to drivers. Allow device layer of
drivers to use that lock directly instead of creating their own
which always runs into ordering issues in devlink callbacks.
- Add header/data split indication to guide user space enabling of
TCP zero-copy Rx.
- Allow configuring completion queue event size.
- Refactor page_pool to enable fragmenting after allocation.
- Add allocation and page reuse statistics to page_pool.
- Improve Multiple Spanning Trees support in the bridge to allow
reuse of topologies across VLANs, saving HW resources in switches.
- DSA (Distributed Switch Architecture):
- replay and offload of host VLAN entries
- offload of static and local FDB entries on LAG interfaces
- FDB isolation and unicast filtering
New hardware / drivers
----------------------
- Ethernet:
- LAN937x T1 PHYs
- Davicom DM9051 SPI NIC driver
- Realtek RTL8367S, RTL8367RB-VB switch and MDIO
- Microchip ksz8563 switches
- Netronome NFP3800 SmartNICs
- Fungible SmartNICs
- MediaTek MT8195 switches
- WiFi:
- mt76: MediaTek mt7916
- mt76: MediaTek mt7921u USB adapters
- brcmfmac: Broadcom BCM43454/6
- Mobile:
- iosm: Intel M.2 7360 WWAN card
Drivers
-------
- Convert many drivers to the new phylink API built for split PCS
designs but also simplifying other cases.
- Intel Ethernet NICs:
- add TTY for GNSS module for E810T device
- improve AF_XDP performance
- GTP-C and GTP-U filter offload
- QinQ VLAN support
- Mellanox Ethernet NICs (mlx5):
- support xdp->data_meta
- multi-buffer XDP
- offload tc push_eth and pop_eth actions
- Netronome Ethernet NICs (nfp):
- flow-independent tc action hardware offload (police / meter)
- AF_XDP
- Other Ethernet NICs:
- at803x: fiber and SFP support
- xgmac: mdio: preamble suppression and custom MDC frequencies
- r8169: enable ASPM L1.2 if system vendor flags it as safe
- macb/gem: ZynqMP SGMII
- hns3: add TX push mode
- dpaa2-eth: software TSO
- lan743x: multi-queue, mdio, SGMII, PTP
- axienet: NAPI and GRO support
- Mellanox Ethernet switches (mlxsw):
- source and dest IP address rewrites
- RJ45 ports
- Marvell Ethernet switches (prestera):
- basic routing offload
- multi-chain TC ACL offload
- NXP embedded Ethernet switches (ocelot & felix):
- PTP over UDP with the ocelot-8021q DSA tagging protocol
- basic QoS classification on Felix DSA switch using dcbnl
- port mirroring for ocelot switches
- Microchip high-speed industrial Ethernet (sparx5):
- offloading of bridge port flooding flags
- PTP Hardware Clock
- Other embedded switches:
- lan966x: PTP Hardward Clock
- qca8k: mdio read/write operations via crafted Ethernet packets
- Qualcomm 802.11ax WiFi (ath11k):
- add LDPC FEC type and 802.11ax High Efficiency data in radiotap
- enable RX PPDU stats in monitor co-exist mode
- Intel WiFi (iwlwifi):
- UHB TAS enablement via BIOS
- band disablement via BIOS
- channel switch offload
- 32 Rx AMPDU sessions in newer devices
- MediaTek WiFi (mt76):
- background radar detection
- thermal management improvements on mt7915
- SAR support for more mt76 platforms
- MBSSID and 6 GHz band on mt7915
- RealTek WiFi:
- rtw89: AP mode
- rtw89: 160 MHz channels and 6 GHz band
- rtw89: hardware scan
- Bluetooth:
- mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS)
- Microchip CAN (mcp251xfd):
- multiple RX-FIFOs and runtime configurable RX/TX rings
- internal PLL, runtime PM handling simplification
- improve chip detection and error handling after wakeup"
* tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2521 commits)
llc: fix netdevice reference leaks in llc_ui_bind()
drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool
ice: don't allow to run ice_send_event_to_aux() in atomic ctx
ice: fix 'scheduling while atomic' on aux critical err interrupt
net/sched: fix incorrect vlan_push_eth dest field
net: bridge: mst: Restrict info size queries to bridge ports
net: marvell: prestera: add missing destroy_workqueue() in prestera_module_init()
drivers: net: xgene: Fix regression in CRC stripping
net: geneve: add missing netlink policy and size for IFLA_GENEVE_INNER_PROTO_INHERIT
net: dsa: fix missing host-filtered multicast addresses
net/mlx5e: Fix build warning, detected write beyond size of field
iwlwifi: mvm: Don't fail if PPAG isn't supported
selftests/bpf: Fix kprobe_multi test.
Revert "rethook: x86: Add rethook x86 implementation"
Revert "arm64: rethook: Add arm64 rethook implementation"
Revert "powerpc: Add rethook support"
Revert "ARM: rethook: Add rethook arm implementation"
netdevice: add missing dm_private kdoc
net: bridge: mst: prevent NULL deref in br_mst_info_size()
selftests: forwarding: Use same VRF for port and VLAN upper
...
|
|
linux/signal.h and asm/signal.h are currently excluded from the UAPI
compile-test because of the errors like follows:
HDRTEST usr/include/asm/signal.h
In file included from <command-line>:
./usr/include/asm/signal.h:103:9: error: unknown type name ‘size_t’
103 | size_t ss_size;
| ^~~~~~
The errors can be fixed by replacing size_t with __kernel_size_t.
Then, remove the no-header-test entries from user/include/Makefile.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add the SO_TXREHASH socket option to control hash rethink behavior per socket.
When default mode is set, sockets disable rehash at initialization and use
sysctl option when entering listen state. setsockopt() overrides default
behavior.
Signed-off-by: Akhmat Karakotov <hmukos@yandex-team.ru>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some architectures do not include uapi/asm/socket.h
Fixes: 2bb2f5fb21b0 ("net: add new socket option SO_RESERVE_MEM")
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Most of the contents of setup.h have no value for userspace
applications. The file was probably moved to uapi accidentally.
Keep the file in uapi to define the alpha-specific COMMAND_LINE_SIZE.
Move all other defines to arch/alpha/include/asm/setup.h.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull siginfo si_trapno updates from Eric Biederman:
"The full set of si_trapno changes was not appropriate as a fix for the
newly added SIGTRAP TRAP_PERF, and so I postponed the rest of the
related cleanups.
This is the rest of the cleanups for si_trapno that reduces it from
being a really weird arch special case that is expect to be always
present (but isn't) on the architectures that support it to being yet
another field in the _sigfault union of struct siginfo.
The changes have been reviewed and marinated in linux-next. With the
removal of this awkward special case new code (like SIGTRAP TRAP_PERF)
that works across architectures should be easier to write and
maintain"
* 'siginfo-si_trapno-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
signal: Rename SIL_PERF_EVENT SIL_FAULT_PERF_EVENT for consistency
signal: Verify the alignment and size of siginfo_t
signal: Remove the generic __ARCH_SI_TRAPNO support
signal/alpha: si_trapno is only used with SIGFPE and SIGTRAP TRAP_UNK
signal/sparc: si_trapno is only used with SIGILL ILL_ILLTRP
arm64: Add compile-time asserts for siginfo_t offsets
arm: Add compile-time asserts for siginfo_t offsets
sparc64: Add compile-time asserts for siginfo_t offsets
|
|
SOCK_SNDBUF_LOCK and SOCK_RCVBUF_LOCK flags disable automatic socket
buffers adjustment done by kernel (see tcp_fixup_rcvbuf() and
tcp_sndbuf_expand()). If we've just created a new socket this adjustment
is enabled on it, but if one changes the socket buffer size by
setsockopt(SO_{SND,RCV}BUF*) it becomes disabled.
CRIU needs to call setsockopt(SO_{SND,RCV}BUF*) on each socket on
restore as it first needs to increase buffer sizes for packet queues
restore and second it needs to restore back original buffer sizes. So
after CRIU restore all sockets become non-auto-adjustable, which can
decrease network performance of restored applications significantly.
CRIU need to be able to restore sockets with enabled/disabled adjustment
to the same state it was before dump, so let's add special setsockopt
for it.
Let's also export SOCK_SNDBUF_LOCK and SOCK_RCVBUF_LOCK flags to uAPI so
that using these interface one can reenable automatic socket buffer
adjustment on their sockets.
Signed-off-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
While reviewing the signal handlers on alpha it became clear that
si_trapno is only set to a non-zero value when sending SIGFPE and when
sending SITGRAP with si_code TRAP_UNK.
Add send_sig_fault_trapno and send SIGTRAP TRAP_UNK, and SIGFPE with it.
Remove the define of __ARCH_SI_TRAPNO and remove the always zero
si_trapno parameter from send_sig_fault and force_sig_fault.
v1: https://lkml.kernel.org/r/m1eeers7q7.fsf_-_@fess.ebiederm.org
v2: https://lkml.kernel.org/r/20210505141101.11519-7-ebiederm@xmission.com
Link: https://lkml.kernel.org/r/87h7gvxx7l.fsf_-_@disp2133
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
Merge more updates from Andrew Morton:
"190 patches.
Subsystems affected by this patch series: mm (hugetlb, userfaultfd,
vmscan, kconfig, proc, z3fold, zbud, ras, mempolicy, memblock,
migration, thp, nommu, kconfig, madvise, memory-hotplug, zswap,
zsmalloc, zram, cleanups, kfence, and hmm), procfs, sysctl, misc,
core-kernel, lib, lz4, checkpatch, init, kprobes, nilfs2, hfs,
signals, exec, kcov, selftests, compress/decompress, and ipc"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (190 commits)
ipc/util.c: use binary search for max_idx
ipc/sem.c: use READ_ONCE()/WRITE_ONCE() for use_global_lock
ipc: use kmalloc for msg_queue and shmid_kernel
ipc sem: use kvmalloc for sem_undo allocation
lib/decompressors: remove set but not used variabled 'level'
selftests/vm/pkeys: exercise x86 XSAVE init state
selftests/vm/pkeys: refill shadow register after implicit kernel write
selftests/vm/pkeys: handle negative sys_pkey_alloc() return code
selftests/vm/pkeys: fix alloc_random_pkey() to make it really, really random
kcov: add __no_sanitize_coverage to fix noinstr for all architectures
exec: remove checks in __register_bimfmt()
x86: signal: don't do sas_ss_reset() until we are certain that sigframe won't be abandoned
hfsplus: report create_date to kstat.btime
hfsplus: remove unnecessary oom message
nilfs2: remove redundant continue statement in a while-loop
kprobes: remove duplicated strong free_insn_page in x86 and s390
init: print out unknown kernel parameters
checkpatch: do not complain about positive return values starting with EPOLL
checkpatch: improve the indented label test
checkpatch: scripts/spdxcheck.py now requires python3
...
|
|
I. Background: Sparse Memory Mappings
When we manage sparse memory mappings dynamically in user space - also
sometimes involving MAP_NORESERVE - we want to dynamically populate/
discard memory inside such a sparse memory region. Example users are
hypervisors (especially implementing memory ballooning or similar
technologies like virtio-mem) and memory allocators. In addition, we want
to fail in a nice way (instead of generating SIGBUS) if populating does
not succeed because we are out of backend memory (which can happen easily
with file-based mappings, especially tmpfs and hugetlbfs).
While MADV_DONTNEED, MADV_REMOVE and FALLOC_FL_PUNCH_HOLE allow for
reliably discarding memory for most mapping types, there is no generic
approach to populate page tables and preallocate memory.
Although mmap() supports MAP_POPULATE, it is not applicable to the concept
of sparse memory mappings, where we want to populate/discard dynamically
and avoid expensive/problematic remappings. In addition, we never
actually report errors during the final populate phase - it is best-effort
only.
fallocate() can be used to preallocate file-based memory and fail in a
safe way. However, it cannot really be used for any private mappings on
anonymous files via memfd due to COW semantics. In addition, fallocate()
does not actually populate page tables, so we still always get pagefaults
on first access - which is sometimes undesired (i.e., real-time workloads)
and requires real prefaulting of page tables, not just a preallocation of
backend storage. There might be interesting use cases for sparse memory
regions along with mlockall(MCL_ONFAULT) which fallocate() cannot satisfy
as it does not prefault page tables.
II. On preallcoation/prefaulting from user space
Because we don't have a proper interface, what applications (like QEMU and
databases) end up doing is touching (i.e., reading+writing one byte to not
overwrite existing data) all individual pages.
However, that approach
1) Can result in wear on storage backing, because we end up reading/writing
each page; this is especially a problem for dax/pmem.
2) Can result in mmap_sem contention when prefaulting via multiple
threads.
3) Requires expensive signal handling, especially to catch SIGBUS in case
of hugetlbfs/shmem/file-backed memory. For example, this is
problematic in hypervisors like QEMU where SIGBUS handlers might already
be used by other subsystems concurrently to e.g, handle hardware errors.
"Simply" doing preallocation concurrently from other thread is not that
easy.
III. On MADV_WILLNEED
Extending MADV_WILLNEED is not an option because
1. It would change the semantics: "Expect access in the near future." and
"might be a good idea to read some pages" vs. "Definitely populate/
preallocate all memory and definitely fail on errors.".
2. Existing users (like virtio-balloon in QEMU when deflating the balloon)
don't want populate/prealloc semantics. They treat this rather as a hint
to give a little performance boost without too much overhead - and don't
expect that a lot of memory might get consumed or a lot of time
might be spent.
IV. MADV_POPULATE_READ and MADV_POPULATE_WRITE
Let's introduce MADV_POPULATE_READ and MADV_POPULATE_WRITE, inspired by
MAP_POPULATE, with the following semantics:
1. MADV_POPULATE_READ can be used to prefault page tables just like
manually reading each individual page. This will not break any COW
mappings. The shared zero page might get mapped and no backend storage
might get preallocated -- allocation might be deferred to
write-fault time. Especially shared file mappings require an explicit
fallocate() upfront to actually preallocate backend memory (blocks in
the file system) in case the file might have holes.
2. If MADV_POPULATE_READ succeeds, all page tables have been populated
(prefaulted) readable once.
3. MADV_POPULATE_WRITE can be used to preallocate backend memory and
prefault page tables just like manually writing (or
reading+writing) each individual page. This will break any COW
mappings -- e.g., the shared zeropage is never populated.
4. If MADV_POPULATE_WRITE succeeds, all page tables have been populated
(prefaulted) writable once.
5. MADV_POPULATE_READ and MADV_POPULATE_WRITE cannot be applied to special
mappings marked with VM_PFNMAP and VM_IO. Also, proper access
permissions (e.g., PROT_READ, PROT_WRITE) are required. If any such
mapping is encountered, madvise() fails with -EINVAL.
6. If MADV_POPULATE_READ or MADV_POPULATE_WRITE fails, some page tables
might have been populated.
7. MADV_POPULATE_READ and MADV_POPULATE_WRITE will return -EHWPOISON
when encountering a HW poisoned page in the range.
8. Similar to MAP_POPULATE, MADV_POPULATE_READ and MADV_POPULATE_WRITE
cannot protect from the OOM (Out Of Memory) handler killing the
process.
While the use case for MADV_POPULATE_WRITE is fairly obvious (i.e.,
preallocate memory and prefault page tables for VMs), one issue is that
whenever we prefault pages writable, the pages have to be marked dirty,
because the CPU could dirty them any time. while not a real problem for
hugetlbfs or dax/pmem, it can be a problem for shared file mappings: each
page will be marked dirty and has to be written back later when evicting.
MADV_POPULATE_READ allows for optimizing this scenario: Pre-read a whole
mapping from backend storage without marking it dirty, such that eviction
won't have to write it back. As discussed above, shared file mappings
might require an explciit fallocate() upfront to achieve
preallcoation+prepopulation.
Although sparse memory mappings are the primary use case, this will also
be useful for other preallocate/prefault use cases where MAP_POPULATE is
not desired or the semantics of MAP_POPULATE are not sufficient: as one
example, QEMU users can trigger preallocation/prefaulting of guest RAM
after the mapping was created -- and don't want errors to be silently
suppressed.
Looking at the history, MADV_POPULATE was already proposed in 2013 [1],
however, the main motivation back than was performance improvements --
which should also still be the case.
V. Single-threaded performance comparison
I did a short experiment, prefaulting page tables on completely *empty
mappings/files* and repeated the experiment 10 times. The results
correspond to the shortest execution time. In general, the performance
benefit for huge pages is negligible with small mappings.
V.1: Private mappings
POPULATE_READ and POPULATE_WRITE is fastest. Note that
Reading/POPULATE_READ will populate the shared zeropage where applicable
-- which result in short population times.
The fastest way to allocate backend storage (here: swap or huge pages) and
prefault page tables is POPULATE_WRITE.
V.2: Shared mappings
fallocate() is fastest, however, doesn't prefault page tables.
POPULATE_WRITE is faster than simple writes and read/writes.
POPULATE_READ is faster than simple reads.
Without a fd, the fastest way to allocate backend storage and prefault
page tables is POPULATE_WRITE. With an fd, the fastest way is usually
FALLOCATE+POPULATE_READ or FALLOCATE+POPULATE_WRITE respectively; one
exception are actual files: FALLOCATE+Read is slightly faster than
FALLOCATE+POPULATE_READ.
The fastest way to allocate backend storage prefault page tables is
FALLOCATE+POPULATE_WRITE -- except when dealing with actual files; then,
FALLOCATE+POPULATE_READ is fastest and won't directly mark all pages as
dirty.
v.3: Detailed results
==================================================
2 MiB MAP_PRIVATE:
**************************************************
Anon 4 KiB : Read : 0.119 ms
Anon 4 KiB : Write : 0.222 ms
Anon 4 KiB : Read/Write : 0.380 ms
Anon 4 KiB : POPULATE_READ : 0.060 ms
Anon 4 KiB : POPULATE_WRITE : 0.158 ms
Memfd 4 KiB : Read : 0.034 ms
Memfd 4 KiB : Write : 0.310 ms
Memfd 4 KiB : Read/Write : 0.362 ms
Memfd 4 KiB : POPULATE_READ : 0.039 ms
Memfd 4 KiB : POPULATE_WRITE : 0.229 ms
Memfd 2 MiB : Read : 0.030 ms
Memfd 2 MiB : Write : 0.030 ms
Memfd 2 MiB : Read/Write : 0.030 ms
Memfd 2 MiB : POPULATE_READ : 0.030 ms
Memfd 2 MiB : POPULATE_WRITE : 0.030 ms
tmpfs : Read : 0.033 ms
tmpfs : Write : 0.313 ms
tmpfs : Read/Write : 0.406 ms
tmpfs : POPULATE_READ : 0.039 ms
tmpfs : POPULATE_WRITE : 0.285 ms
file : Read : 0.033 ms
file : Write : 0.351 ms
file : Read/Write : 0.408 ms
file : POPULATE_READ : 0.039 ms
file : POPULATE_WRITE : 0.290 ms
hugetlbfs : Read : 0.030 ms
hugetlbfs : Write : 0.030 ms
hugetlbfs : Read/Write : 0.030 ms
hugetlbfs : POPULATE_READ : 0.030 ms
hugetlbfs : POPULATE_WRITE : 0.030 ms
**************************************************
4096 MiB MAP_PRIVATE:
**************************************************
Anon 4 KiB : Read : 237.940 ms
Anon 4 KiB : Write : 708.409 ms
Anon 4 KiB : Read/Write : 1054.041 ms
Anon 4 KiB : POPULATE_READ : 124.310 ms
Anon 4 KiB : POPULATE_WRITE : 572.582 ms
Memfd 4 KiB : Read : 136.928 ms
Memfd 4 KiB : Write : 963.898 ms
Memfd 4 KiB : Read/Write : 1106.561 ms
Memfd 4 KiB : POPULATE_READ : 78.450 ms
Memfd 4 KiB : POPULATE_WRITE : 805.881 ms
Memfd 2 MiB : Read : 357.116 ms
Memfd 2 MiB : Write : 357.210 ms
Memfd 2 MiB : Read/Write : 357.606 ms
Memfd 2 MiB : POPULATE_READ : 356.094 ms
Memfd 2 MiB : POPULATE_WRITE : 356.937 ms
tmpfs : Read : 137.536 ms
tmpfs : Write : 954.362 ms
tmpfs : Read/Write : 1105.954 ms
tmpfs : POPULATE_READ : 80.289 ms
tmpfs : POPULATE_WRITE : 822.826 ms
file : Read : 137.874 ms
file : Write : 987.025 ms
file : Read/Write : 1107.439 ms
file : POPULATE_READ : 80.413 ms
file : POPULATE_WRITE : 857.622 ms
hugetlbfs : Read : 355.607 ms
hugetlbfs : Write : 355.729 ms
hugetlbfs : Read/Write : 356.127 ms
hugetlbfs : POPULATE_READ : 354.585 ms
hugetlbfs : POPULATE_WRITE : 355.138 ms
**************************************************
2 MiB MAP_SHARED:
**************************************************
Anon 4 KiB : Read : 0.394 ms
Anon 4 KiB : Write : 0.348 ms
Anon 4 KiB : Read/Write : 0.400 ms
Anon 4 KiB : POPULATE_READ : 0.326 ms
Anon 4 KiB : POPULATE_WRITE : 0.273 ms
Anon 2 MiB : Read : 0.030 ms
Anon 2 MiB : Write : 0.030 ms
Anon 2 MiB : Read/Write : 0.030 ms
Anon 2 MiB : POPULATE_READ : 0.030 ms
Anon 2 MiB : POPULATE_WRITE : 0.030 ms
Memfd 4 KiB : Read : 0.412 ms
Memfd 4 KiB : Write : 0.372 ms
Memfd 4 KiB : Read/Write : 0.419 ms
Memfd 4 KiB : POPULATE_READ : 0.343 ms
Memfd 4 KiB : POPULATE_WRITE : 0.288 ms
Memfd 4 KiB : FALLOCATE : 0.137 ms
Memfd 4 KiB : FALLOCATE+Read : 0.446 ms
Memfd 4 KiB : FALLOCATE+Write : 0.330 ms
Memfd 4 KiB : FALLOCATE+Read/Write : 0.454 ms
Memfd 4 KiB : FALLOCATE+POPULATE_READ : 0.379 ms
Memfd 4 KiB : FALLOCATE+POPULATE_WRITE : 0.268 ms
Memfd 2 MiB : Read : 0.030 ms
Memfd 2 MiB : Write : 0.030 ms
Memfd 2 MiB : Read/Write : 0.030 ms
Memfd 2 MiB : POPULATE_READ : 0.030 ms
Memfd 2 MiB : POPULATE_WRITE : 0.030 ms
Memfd 2 MiB : FALLOCATE : 0.030 ms
Memfd 2 MiB : FALLOCATE+Read : 0.031 ms
Memfd 2 MiB : FALLOCATE+Write : 0.031 ms
Memfd 2 MiB : FALLOCATE+Read/Write : 0.031 ms
Memfd 2 MiB : FALLOCATE+POPULATE_READ : 0.030 ms
Memfd 2 MiB : FALLOCATE+POPULATE_WRITE : 0.030 ms
tmpfs : Read : 0.416 ms
tmpfs : Write : 0.369 ms
tmpfs : Read/Write : 0.425 ms
tmpfs : POPULATE_READ : 0.346 ms
tmpfs : POPULATE_WRITE : 0.295 ms
tmpfs : FALLOCATE : 0.139 ms
tmpfs : FALLOCATE+Read : 0.447 ms
tmpfs : FALLOCATE+Write : 0.333 ms
tmpfs : FALLOCATE+Read/Write : 0.454 ms
tmpfs : FALLOCATE+POPULATE_READ : 0.380 ms
tmpfs : FALLOCATE+POPULATE_WRITE : 0.272 ms
file : Read : 0.191 ms
file : Write : 0.511 ms
file : Read/Write : 0.524 ms
file : POPULATE_READ : 0.196 ms
file : POPULATE_WRITE : 0.434 ms
file : FALLOCATE : 0.004 ms
file : FALLOCATE+Read : 0.197 ms
file : FALLOCATE+Write : 0.554 ms
file : FALLOCATE+Read/Write : 0.480 ms
file : FALLOCATE+POPULATE_READ : 0.201 ms
file : FALLOCATE+POPULATE_WRITE : 0.381 ms
hugetlbfs : Read : 0.030 ms
hugetlbfs : Write : 0.030 ms
hugetlbfs : Read/Write : 0.030 ms
hugetlbfs : POPULATE_READ : 0.030 ms
hugetlbfs : POPULATE_WRITE : 0.030 ms
hugetlbfs : FALLOCATE : 0.030 ms
hugetlbfs : FALLOCATE+Read : 0.031 ms
hugetlbfs : FALLOCATE+Write : 0.031 ms
hugetlbfs : FALLOCATE+Read/Write : 0.030 ms
hugetlbfs : FALLOCATE+POPULATE_READ : 0.030 ms
hugetlbfs : FALLOCATE+POPULATE_WRITE : 0.030 ms
**************************************************
4096 MiB MAP_SHARED:
**************************************************
Anon 4 KiB : Read : 1053.090 ms
Anon 4 KiB : Write : 913.642 ms
Anon 4 KiB : Read/Write : 1060.350 ms
Anon 4 KiB : POPULATE_READ : 893.691 ms
Anon 4 KiB : POPULATE_WRITE : 782.885 ms
Anon 2 MiB : Read : 358.553 ms
Anon 2 MiB : Write : 358.419 ms
Anon 2 MiB : Read/Write : 357.992 ms
Anon 2 MiB : POPULATE_READ : 357.533 ms
Anon 2 MiB : POPULATE_WRITE : 357.808 ms
Memfd 4 KiB : Read : 1078.144 ms
Memfd 4 KiB : Write : 942.036 ms
Memfd 4 KiB : Read/Write : 1100.391 ms
Memfd 4 KiB : POPULATE_READ : 925.829 ms
Memfd 4 KiB : POPULATE_WRITE : 804.394 ms
Memfd 4 KiB : FALLOCATE : 304.632 ms
Memfd 4 KiB : FALLOCATE+Read : 1163.359 ms
Memfd 4 KiB : FALLOCATE+Write : 933.186 ms
Memfd 4 KiB : FALLOCATE+Read/Write : 1187.304 ms
Memfd 4 KiB : FALLOCATE+POPULATE_READ : 1013.660 ms
Memfd 4 KiB : FALLOCATE+POPULATE_WRITE : 794.560 ms
Memfd 2 MiB : Read : 358.131 ms
Memfd 2 MiB : Write : 358.099 ms
Memfd 2 MiB : Read/Write : 358.250 ms
Memfd 2 MiB : POPULATE_READ : 357.563 ms
Memfd 2 MiB : POPULATE_WRITE : 357.334 ms
Memfd 2 MiB : FALLOCATE : 356.735 ms
Memfd 2 MiB : FALLOCATE+Read : 358.152 ms
Memfd 2 MiB : FALLOCATE+Write : 358.331 ms
Memfd 2 MiB : FALLOCATE+Read/Write : 358.018 ms
Memfd 2 MiB : FALLOCATE+POPULATE_READ : 357.286 ms
Memfd 2 MiB : FALLOCATE+POPULATE_WRITE : 357.523 ms
tmpfs : Read : |
