summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts
AgeCommit message (Collapse)AuthorFilesLines
2022-03-19ARM: dts: rockchip: fix a typo on rk3288 crypto-controllerCorentin Labbe1-1/+1
[ Upstream commit 3916c3619599a3970d3e6f98fb430b7c46266ada ] crypto-controller had a typo, fix it. In the same time, rename it to just crypto Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20220209120355.1985707-1-clabbe@baylibre.com Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-03-19ARM: dts: rockchip: reorder rk322x hmdi clocksSascha Hauer1-2/+2
[ Upstream commit be4e65bdffab5f588044325117df77dad7e9c45a ] The binding specifies the clock order to "iahb", "isfr", "cec". Reorder the clocks accordingly. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Link: https://lore.kernel.org/r/20220210142353.3420859-1-s.hauer@pengutronix.de Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-03-16ARM: dts: aspeed: Fix AST2600 quad spi groupJoel Stanley1-1/+1
[ Upstream commit 2f6edb6bcb2f3f41d876e0eba2ba97f87a0296ea ] Requesting quad mode for the FMC resulted in an error: &fmc { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fwqspi_default>' [ 0.742963] aspeed-g6-pinctrl 1e6e2000.syscon:pinctrl: invalid function FWQSPID in map table  This is because the quad mode pins are a group of pins, not a function. After applying this patch we can request the pins and the QSPI data lines are muxed: # cat /sys/kernel/debug/pinctrl/1e6e2000.syscon\:pinctrl-aspeed-g6-pinctrl/pinmux-pins |grep 1e620000.spi pin 196 (AE12): device 1e620000.spi function FWSPID group FWQSPID pin 197 (AF12): device 1e620000.spi function FWSPID group FWQSPID pin 240 (Y1): device 1e620000.spi function FWSPID group FWQSPID pin 241 (Y2): device 1e620000.spi function FWSPID group FWQSPID pin 242 (Y3): device 1e620000.spi function FWSPID group FWQSPID pin 243 (Y4): device 1e620000.spi function FWSPID group FWQSPID Fixes: f510f04c8c83 ("ARM: dts: aspeed: Add AST2600 pinmux nodes") Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20220304011010.974863-1-joel@jms.id.au Link: https://lore.kernel.org/r/20220304011010.974863-1-joel@jms.id.au' Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-03-16ARM: boot: dts: bcm2711: Fix HVS register rangeMaxime Ripard1-0/+1
[ Upstream commit 515415d316168c6521d74ea8280287e28d7303e6 ] While the HVS has the same context memory size in the BCM2711 than in the previous SoCs, the range allocated to the registers doubled and it now takes 16k + 16k, compared to 8k + 16k before. The KMS driver will use the whole context RAM though, eventually resulting in a pointer dereference error when we access the higher half of the context memory since it hasn't been mapped. Fixes: 4564363351e2 ("ARM: dts: bcm2711: Enable the display pipeline") Signed-off-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-03-08ARM: tegra: Move panels to AUX busThierry Reding3-19/+25
[ Upstream commit 8d3b01e0d4bb54368d73d0984466d72c2eeeac74 ] Move the eDP panel on Venice 2 and Nyan boards into the corresponding AUX bus device tree node. This allows us to avoid a nasty circular dependency that would otherwise be created between the DPAUX and panel nodes via the DDC/I2C phandle. Fixes: eb481f9ac95c ("ARM: tegra: add Acer Chromebook 13 device tree") Fixes: 59fe02cb079f ("ARM: tegra: Add DTS for the nyan-blaze board") Fixes: 40e231c770a4 ("ARM: tegra: Enable eDP for Venice2") Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-03-08ARM: dts: Use 32KiHz oscillator on devkit8000Anthoine Bourgeois1-16/+1
[ Upstream commit 8840f5460a23759403f1f2860429dcbcc2f04a65 ] Devkit8000 board seems to always used 32k_counter as clocksource. Restore this behavior. If clocksource is back to 32k_counter, timer12 is now the clockevent source (as before) and timer2 is not longer needed here. This commit fixes the same issue observed with commit 23885389dbbb ("ARM: dts: Fix timer regression for beagleboard revision c") when sleep is blocked until hitting keys over serial console. Fixes: aba1ad05da08 ("clocksource/drivers/timer-ti-dm: Add clockevent and clocksource support") Fixes: e428e250fde6 ("ARM: dts: Configure system timers for omap3") Signed-off-by: Anthoine Bourgeois <anthoine.bourgeois@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-03-08ARM: dts: switch timer config to common devkit8000 devicetreeAnthoine Bourgeois2-33/+33
[ Upstream commit 64324ef337d0caa5798fa8fa3f6bbfbd3245868a ] This patch allow lcd43 and lcd70 flavors to benefit from timer evolution. Fixes: e428e250fde6 ("ARM: dts: Configure system timers for omap3") Signed-off-by: Anthoine Bourgeois <anthoine.bourgeois@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-16ARM: dts: imx7ulp: Fix 'assigned-clocks-parents' typoRob Herring1-1/+1
[ Upstream commit 6d58c5e21a3fe355ce6d1808e96d02a610265218 ] The correct property name is 'assigned-clock-parents', not 'assigned-clocks-parents'. Though if the platform works with the typo, one has to wonder if the property is even needed. Signed-off-by: Rob Herring <robh@kernel.org> Fixes: 8b8c7d97e2c7 ("ARM: dts: imx7ulp: Add wdog1 node") Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-16ARM: dts: imx6qdl-udoo: Properly describe the SD card detectFabio Estevam1-1/+4
[ Upstream commit 993d66140f8d1c1853a3b58b77b43b681eb64dee ] GPIO7_IO00 is used as SD card detect. Properly describe this in the devicetree. Fixes: 40cdaa542cf0 ("ARM: dts: imx6q-udoo: Add initial board support") Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-16ARM: dts: meson8b: Fix the UART device-tree schema validationMartin Blumenstingl1-12/+12
[ Upstream commit 3375aa77135f6aeb1107ed839a2050a4118444bc ] The dt-bindings for the UART controller only allow the following values for Meson8 SoCs: - "amlogic,meson8b-uart", "amlogic,meson-ao-uart" - "amlogic,meson8b-uart" Use the correct fallback compatible string "amlogic,meson-ao-uart" for AO UART. Drop the "amlogic,meson-uart" compatible string from the EE domain UART controllers. Also update the order of the clocks to match the order defined in the yaml bindings. Fixes: b02d6e73f5fc96 ("ARM: dts: meson8b: use stable UART bindings with correct gate clock") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20211227180026.4068352-4-martin.blumenstingl@googlemail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-16ARM: dts: meson8: Fix the UART device-tree schema validationMartin Blumenstingl1-12/+12
[ Upstream commit 57007bfb5469ba31cacf69d52195e8b75f43e32d ] The dt-bindings for the UART controller only allow the following values for Meson8 SoCs: - "amlogic,meson8-uart", "amlogic,meson-ao-uart" - "amlogic,meson8-uart" Use the correct fallback compatible string "amlogic,meson-ao-uart" for AO UART. Drop the "amlogic,meson-uart" compatible string from the EE domain UART controllers. Also update the order of the clocks to match the order defined in the yaml schema. Fixes: 6ca77502050eff ("ARM: dts: meson8: use stable UART bindings with correct gate clock") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20211227180026.4068352-3-martin.blumenstingl@googlemail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-16ARM: dts: meson: Fix the UART compatible stringsMartin Blumenstingl1-4/+4
[ Upstream commit 5225e1b87432dcf0d0fc3440824b91d04c1d6cc1 ] The dt-bindings for the UART controller only allow the following values for Meson6 SoCs: - "amlogic,meson6-uart", "amlogic,meson-ao-uart" - "amlogic,meson6-uart" Use the correct fallback compatible string "amlogic,meson-ao-uart" for AO UART. Drop the "amlogic,meson-uart" compatible string from the EE domain UART controllers. Fixes: ec9b59162fd831 ("ARM: dts: meson6: use stable UART bindings") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20211227180026.4068352-2-martin.blumenstingl@googlemail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-16ARM: dts: Fix timer regression for beagleboard revision cTony Lindgren3-33/+48
[ Upstream commit 23885389dbbbbc698986e77a45c1fc44a6e3632e ] Commit e428e250fde6 ("ARM: dts: Configure system timers for omap3") caused a timer regression for beagleboard revision c where the system clockevent stops working if omap3isp module is unloaded. Turns out we still have beagleboard revisions a-b4 capacitor c70 quirks applied that limit the usable timers for no good reason. This also affects the power management as we use the system clock instead of the 32k clock source. Let's fix the issue by adding a new omap3-beagle-ab4.dts for the old timer quirks. This allows us to remove the timer quirks for later beagleboard revisions. We also need to update the related timer quirk check for the correct compatible property. Fixes: e428e250fde6 ("ARM: dts: Configure system timers for omap3") Cc: linux-kernel@vger.kernel.org Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Rob Herring <robh+dt@kernel.org> Reported-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Tested-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-16ARM: dts: Fix boot regression on SkomerLinus Walleij1-4/+0
commit d9058d6a0e92d8e4a00855f8fe204792f42794db upstream. The signal routing on the Skomer board was incorrect making it impossible to mount root from the SD card. Fix this up. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: stable@vger.kernel.org Cc: Stefan Hansson <newbyte@disroot.org> Link: https://lore.kernel.org/r/20220205235312.446730-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-16ARM: dts: imx23-evk: Remove MX23_PAD_SSP1_DETECT from hog groupFabio Estevam1-1/+0
commit 42c9b28e6862d16db82a56f5667cf4d1f6658cf6 upstream. Currently, SD card fails to mount due to the following pinctrl error: [ 11.170000] imx23-pinctrl 80018000.pinctrl: pin SSP1_DETECT already requested by 80018000.pinctrl; cannot claim for 80010000.spi [ 11.180000] imx23-pinctrl 80018000.pinctrl: pin-65 (80010000.spi) status -22 [ 11.190000] imx23-pinctrl 80018000.pinctrl: could not request pin 65 (SSP1_DETECT) from group mmc0-pins-fixup.0 on device 80018000.pinctrl [ 11.200000] mxs-mmc 80010000.spi: Error applying setting, reverse things back Fix it by removing the MX23_PAD_SSP1_DETECT pin from the hog group as it is already been used by the mmc0-pins-fixup pinctrl group. With this change the rootfs can be mounted and the imx23-evk board can boot successfully. Cc: <stable@vger.kernel.org> Fixes: bc3875f1a61e ("ARM: dts: mxs: modify mx23/mx28 dts files to use pinctrl headers") Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27ARM: dts: omap3-n900: Fix lp5523 for multi colorSicelo A. Mhlongo1-10/+40
[ Upstream commit e9af026a3b24f59d7af4609f73e0ef60a4d6d516 ] Since the LED multicolor framework support was added in commit 92a81562e695 ("leds: lp55xx: Add multicolor framework support to lp55xx") LEDs on this platform stopped working. Fixes: 92a81562e695 ("leds: lp55xx: Add multicolor framework support to lp55xx") Fixes: ac219bf3c9bd ("leds: lp55xx: Convert to use GPIO descriptors") Signed-off-by: Merlijn Wajer <merlijn@wizzup.org> Signed-off-by: Sicelo A. Mhlongo <absicsz@gmail.com> Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27ARM: dts: armada-38x: Add generic compatible to UART nodesMarek Behún1-2/+2
[ Upstream commit 62480772263ab6b52e758f2346c70a526abd1d28 ] Add generic compatible string "ns16550a" to serial port nodes of Armada 38x. This makes it possible to use earlycon. Fixes: 0d3d96ab0059 ("ARM: mvebu: add Device Tree description of the Armada 380/385 SoCs") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27ARM: dts: gemini: NAS4220-B: fis-index-block with 128 KiB sectorsChristian Lamparter1-1/+1
[ Upstream commit 4754eab7e5a78bdefe7a960c5c260c95ebbb5fa6 ] Steven Maddox reported in the OpenWrt bugzilla, that his RaidSonic IB-NAS4220-B was no longer booting with the new OpenWrt 21.02 (uses linux 5.10's device-tree). However, it was working with the previous OpenWrt 19.07 series (uses 4.14). |[ 5.548038] No RedBoot partition table detected in 30000000.flash |[ 5.618553] Searching for RedBoot partition table in 30000000.flash at offset 0x0 |[ 5.739093] No RedBoot partition table detected in 30000000.flash |... |[ 7.039504] Waiting for root device /dev/mtdblock3... The provided bootlog shows that the RedBoot partition parser was looking for the partition table "at offset 0x0". Which is strange since the comment in the device-tree says it should be at 0xfe0000. Further digging on the internet led to a review site that took some useful PCB pictures of their review unit back in February 2009. Their picture shows a Spansion S29GL128N11TFI01 flash chip. >From Spansion's Datasheet: "S29GL128N: One hundred twenty-eight 64 Kword (128 Kbyte) sectors" Steven also provided a "cat /sys/class/mtd/mtd0/erasesize" from his unit: "131072". With the 128 KiB Sector/Erasesize in mind. This patch changes the fis-index-block property to (0xfe0000 / 0x20000) = 0x7f. Fixes: b5a923f8c739 ("ARM: dts: gemini: Switch to redboot partition parsing") Reported-by: Steven Maddox <s.maddox@lantizia.me.uk> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Steven Maddox <s.maddox@lantizia.me.uk> Link: https://lore.kernel.org/r/20211206004334.4169408-1-linus.walleij@linaro.org' Bugzilla: https://bugs.openwrt.org/index.php?do=details&task_id=4137 Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27ARM: dts: stm32: fix dtbs_check warning on ili9341 dts binding on stm32f429 ↵Dillon Min1-1/+1
disco [ Upstream commit b046049e59dca5e5830dc75ed16acf7657a95161 ] Since the compatible string defined from ilitek,ili9341.yaml is "st,sf-tc240t-9370-t", "ilitek,ili9341" so, append "ilitek,ili9341" to avoid the below dtbs_check warning. arch/arm/boot/dts/stm32f429-disco.dt.yaml: display@1: compatible: ['st,sf-tc240t-9370-t'] is too short Fixes: a726e2f000ec ("ARM: dts: stm32: enable ltdc binding with ili9341, gyro l3gd20 on stm32429-disco board") Signed-off-by: Dillon Min <dillon.minfei@gmail.com> Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-16ARM: dts: exynos: Fix BCM4330 Bluetooth reset polarity in I9100Paul Cercueil1-1/+1
commit 9cb6de45a006a9799ec399bce60d64b6d4fcc4af upstream. The reset GPIO was marked active-high, which is against what's specified in the documentation. Mark the reset GPIO as active-low. With this change, Bluetooth can now be used on the i9100. Fixes: 8620cc2f99b7 ("ARM: dts: exynos: Add devicetree file for the Galaxy S2") Cc: stable@vger.kernel.org Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20211031234137.87070-1-paul@crapouillou.net Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-11ARM: dts: gpio-ranges property is now requiredPhil Elwell2-0/+4
[ Upstream commit c8013355ead68dce152cf426686f8a5f80d88b40 ] Since [1], added in 5.7, the absence of a gpio-ranges property has prevented GPIOs from being restored to inputs when released. Add those properties for BCM283x and BCM2711 devices. [1] commit 2ab73c6d8323 ("gpio: Support GPIO controllers without pin-ranges") Link: https://lore.kernel.org/r/20220104170247.956760-1-linus.walleij@linaro.org Fixes: 2ab73c6d8323 ("gpio: Support GPIO controllers without pin-ranges") Fixes: 266423e60ea1 ("pinctrl: bcm2835: Change init order for gpio hogs") Reported-by: Stefan Wahren <stefan.wahren@i2se.com> Reported-by: Florian Fainelli <f.fainelli@gmail.com> Reported-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: Phil Elwell <phil@raspberrypi.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20211206092237.4105895-3-phil@raspberrypi.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-29ARM: dts: imx6qdl-wandboard: Fix Ethernet supportMartin Haaß1-0/+1
[ Upstream commit 39e660687ac0c57499134765abbecf71cfd11eae ] Currently, the imx6q-wandboard Ethernet does not transmit any data. This issue has been exposed by commit f5d9aa79dfdf ("ARM: imx6q: remove clk-out fixup for the Atheros AR8031 and AR8035 PHYs"). Fix it by describing the qca,clk-out-frequency property as suggested by the commit above. Fixes: 77591e42458d ("ARM: dts: imx6qdl-wandboard: add ethernet PHY description") Signed-off-by: Martin Haaß <vvvrrooomm@gmail.com> Tested-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-22ARM: dts: imx6ull-pinfunc: Fix CSI_DATA07__ESAI_TX0 pad nameFabio Estevam1-1/+1
commit 737e65c7956795b3553781fb7bc82fce1c39503f upstream. According to the i.MX6ULL Reference Manual, pad CSI_DATA07 may have the ESAI_TX0 functionality, not ESAI_T0. Also, NXP's i.MX Config Tools 10.0 generates dtsi with the MX6ULL_PAD_CSI_DATA07__ESAI_TX0 naming, so fix it accordingly. There are no devicetree users in mainline that use the old name, so just remove the old entry. Fixes: c201369d4aa5 ("ARM: dts: imx6ull: add imx6ull support") Reported-by: George Makarov <georgemakarov1@gmail.com> Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-22ARM: socfpga: dts: fix qspi node compatibleDinh Nguyen7-8/+8
[ Upstream commit cb25b11943cbcc5a34531129952870420f8be858 ] The QSPI flash node needs to have the required "jedec,spi-nor" in the compatible string. Fixes: 1df99da8953 ("ARM: dts: socfpga: Enable QSPI in Arria10 devkit") Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01ARM: dts: bcm2711: Fix PCIe interruptsFlorian Fainelli1-1/+7
[ Upstream commit 98481f3d72fb88cb5b973153434061015f094925 ] The PCIe host bridge has two interrupt lines, one that goes towards it PCIE_INTR2 second level interrupt controller and one for its MSI second level interrupt controller. The first interrupt line is not currently managed by the driver, which is why it was not a functional problem. The interrupt-map property was also only listing the PCI_INTA interrupts when there are also the INTB, C and D. Reported-by: Jim Quinlan <jim2101024@gmail.com> Fixes: d5c8dc0d4c88 ("ARM: dts: bcm2711: Enable PCIe controller") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01ARM: dts: BCM5301X: Add interrupt properties to GPIO nodeFlorian Fainelli1-0/+2
[ Upstream commit 40f7342f0587639e5ad625adaa15efdd3cffb18f ] The GPIO controller is also an interrupt controller provider and is currently missing the appropriate 'interrupt-controller' and '#interrupt-cells' properties to denote that. Fixes: fb026d3de33b ("ARM: BCM5301X: Add Broadcom's bus-axi to the DTS file") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-01ARM: dts: BCM5301X: Fix I2C controller interruptFlorian Fainelli1-1/+1
[ Upstream commit 754c4050a00e802e122690112fc2c3a6abafa7e2 ] The I2C interrupt controller line is off by 32 because the datasheet describes interrupt inputs into the GIC which are for Shared Peripheral Interrupts and are starting at offset 32. The ARM GIC binding expects the SPI interrupts to be numbered from 0 relative to the SPI base. Fixes: bb097e3e0045 ("ARM: dts: BCM5301X: Add I2C support to the DT") Tested-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-26ARM: dts: qcom: fix memory and mdio nodes naming for RB3011David Heidelberg1-3/+3
[ Upstream commit 14a1f6c9d8017ffbf388e82e1a1f023196d98612 ] Fixes warnings regarding to memory and mdio nodes and apply new naming following dt-schema. Signed-off-by: David Heidelberg <david@ixit.cz> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211020214741.261509-1-david@ixit.cz Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-26ARM: dts: ls1021a-tsn: use generic "jedec,spi-nor" compatible for flashLi Yang1-1/+1
[ Upstream commit 05e63b48b20fa70726be505a7660d1a07bc1cffb ] We cannot list all the possible chips used in different board revisions, just use the generic "jedec,spi-nor" compatible instead. This also fixes dtbs_check error: ['jedec,spi-nor', 's25fl256s1', 's25fl512s'] is too long Signed-off-by: Li Yang <leoyang.li@nxp.com> Reviewed-by: Kuldeep Singh <kuldeep.singh@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-26ARM: dts: ls1021a: move thermal-zones node out of soc/Li Yang1-33/+33
[ Upstream commit 1ee1500ef717eefb5d9bdaf97905cb81b4e69aa4 ] This fixes dtbs-check error from simple-bus schema: soc: thermal-zones: {'type': 'object'} is not allowed for {'cpu-thermal': ..... } From schema: /home/leo/.local/lib/python3.8/site-packages/dtschema/schemas/simple-bus.yaml Signed-off-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-26ARM: dts: omap: fix gpmc,mux-add-data typeRoger Quadros2-2/+2
[ Upstream commit 51b9e22ffd3c4c56cbb7caae9750f70e55ffa603 ] gpmc,mux-add-data is not boolean. Fixes the below errors flagged by dtbs_check. "ethernet@4,0:gpmc,mux-add-data: True is not of type 'array'" Signed-off-by: Roger Quadros <rogerq@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-26ARM: BCM53016: Specify switch ports for Meraki MR32Christian Lamparter1-0/+22
[ Upstream commit 6abc4ca5a28070945e0d68cb4160b309bfbf4b8b ] the switch identifies itself as a BCM53012 (rev 5)... This patch has been tested & verified on OpenWrt's snapshot with Linux 5.10 (didn't test any older kernels). The MR32 is able to "talk to the network" as before with OpenWrt's SWITCHDEV b53 driver. | b53-srab-switch 18007000.ethernet-switch: found switch: BCM53012, rev 5 | libphy: dsa slave smi: probed | b53-srab-switch 18007000.ethernet-switch poe (uninitialized): | PHY [dsa-0.0:00] driver [Generic PHY] (irq=POLL) | b53-srab-switch 18007000.ethernet-switch: Using legacy PHYLIB callbacks. | Please migrate to PHYLINK! | DSA: tree 0 setup Reported-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-26ARM: dts: ux500: Skomer regulator fixesLinus Walleij1-4/+4
[ Upstream commit 7aee0288beab72cdfa35af51f62e94373fca595d ] AUX2 has slightly wrong voltage and AUX5 doesn't need to be always on. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-26ARM: dts: NSP: Fix mpcore, mmc node namesMatthew Hagan1-2/+2
[ Upstream commit 15a563d008ef9d04df525f0c476cd7d7127bb883 ] Running dtbs_check yielded the issues with bcm-nsp.dtsi. Firstly this patch fixes the following message by appending "-bus" to the mpcore node name: mpcore@19000000: $nodename:0: 'mpcore@19000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' Secondly mmc node name. The label name can remain as is. sdhci@21000: $nodename:0: 'sdhci@21000' does not match '^mmc(@.*)?$' Signed-off-by: Matthew Hagan <mnhagan88@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-26ARM: dts: sunxi: Fix OPPs node nameMaxime Ripard3-6/+6
[ Upstream commit ffbe853a3f5a37fa0a511265b21abf097ffdbe45 ] The operating-points-v2 nodes are named inconsistently, but mostly either opp_table0 or gpu-opp-table. However, the underscore is an invalid character for a node name and the thermal zone binding explicitly requires that zones are called opp-table-*. Let's fix it. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20210901091852.479202-43-maxime@cerno.tech Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18ARM: dts: stm32: fix AV96 board SAI2 pin muxing on stm32mp15Olivier Moysan1-4/+4
[ Upstream commit 1a9a9d226f0f0ef5d9bf588ab432e0d679bb1954 ] Fix SAI2A and SAI2B pin muxings for AV96 board on STM32MP15. Change sai2a-4 & sai2a-5 to sai2a-2 & sai2a-2. Change sai2a-4 & sai2a-sleep-5 to sai2b-2 & sai2b-sleep-2 Fixes: dcf185ca8175 ("ARM: dts: stm32: Add alternate pinmux for SAI2 pins on stm32mp15") Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18ARM: dts: stm32: fix SAI sub nodes register rangeOlivier Moysan1-8/+8
[ Upstream commit 6f87a74d31277f0896dcf8c0850ec14bde03c423 ] The STM32 SAI subblocks registers offsets are in the range 0x0004 (SAIx_CR1) to 0x0020 (SAIx_DR). The corresponding range length is 0x20 instead of 0x1c. Change reg property accordingly. Fixes: 5afd65c3a060 ("ARM: dts: stm32: add sai support on stm32mp157c") Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18ARM: dts: stm32: Reduce DHCOR SPI NOR frequency to 50 MHzMarek Vasut1-1/+1
[ Upstream commit 2012579b31293d0a8cf2024e9dab66810bf1a15e ] The SPI NOR is a bit further away from the SoC on DHCOR than on DHCOM, which causes additional signal delay. At 108 MHz, this delay triggers a sporadic issue where the first bit of RX data is not received by the QSPI controller. There are two options of addressing this problem, either by using the DLYB block to compensate the extra delay, or by reducing the QSPI bus clock frequency. The former requires calibration and that is overly complex, so opt for the second option. Fixes: 76045bc457104 ("ARM: dts: stm32: Add QSPI NOR on AV96") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18arm: dts: omap3-gta04a4: accelerometer irq fixAndreas Kemnade1-1/+1
[ Upstream commit 884ea75d79a36faf3731ad9d6b9c29f58697638d ] Fix typo in pinctrl. It did only work because the bootloader seems to have initialized it. Fixes: ee327111953b ("ARM: dts: omap3-gta04: Define and use bma180 irq pin") Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18ARM: dts: at91: tse850: the emac<->phy interface is rmiiPeter Rosin1-1/+1
[ Upstream commit dcdbc335a91a26e022a803e1a6b837266989c032 ] This went unnoticed until commit 7897b071ac3b ("net: macb: convert to phylink") which tickled the problem. The sama5d3 emac has never been capable of rgmii, and it all just happened to work before that commit. Fixes: 21dd0ece34c2 ("ARM: dts: at91: add devicetree for the Axentia TSE-850") Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/ea781f5e-422f-6cbf-3cf4-d5a7bac9392d@axentia.se Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18ARM: dts: qcom: msm8974: Add xo_board reference clock to DSI0 PHYMarijn Suijten1-2/+2
[ Upstream commit 8ccecf6c710b8c048eecc65709640642e5357d6e ] According to YAML validation, and for a future patchset putting this xo_board reference clock to use as VCO reference parent, add the missing clock to dsi_phy0. Fixes: 5a9fc531f6ec ("ARM: dts: msm8974: add display support") Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210830175739.143401-1-marijn.suijten@somainline.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18ARM: dts: BCM5301X: Fix memory nodes namesRafał Miłecki11-11/+11
[ Upstream commit c5e1df3276d7a500678da9453be31a66ad115150 ] Thix fixes: arch/arm/boot/dts/bcm4708-netgear-r6250.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728], [2281701376, 134217728]]} arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728], [2281701376, 134217728]]} arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728], [2281701376, 402653184]]} arch/arm/boot/dts/bcm4709-linksys-ea9200.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728], [2281701376, 134217728]]} arch/arm/boot/dts/bcm4709-netgear-r7000.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728], [2281701376, 134217728]]} arch/arm/boot/dts/bcm4709-netgear-r8000.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728], [2281701376, 134217728]]} arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728]]} arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728], [2281701376, 402653184]]} arch/arm/boot/dts/bcm53016-meraki-mr32.dt.yaml: /: memory: False schema does not allow {'reg': [[0, 134217728]], 'device_type': ['memory']} arch/arm/boot/dts/bcm94708.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728]]} arch/arm/boot/dts/bcm94709.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728]]} Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18ARM: dts: sun7i: A20-olinuxino-lime2: Fix ethernet phy-modeBastien Roucariès1-1/+1
[ Upstream commit 55dd7e059098ce4bd0a55c251cb78e74604abb57 ] Commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config") sets the RX/TX delay according to the phy-mode property in the device tree. For the A20-olinuxino-lime2 board this is "rgmii", which is the wrong setting. Following the example of a900cac3750b ("ARM: dts: sun7i: a20: bananapro: Fix ethernet phy-mode") the phy-mode is changed to "rgmii-id" which gets the Ethernet working again on this board. Signed-off-by: Bastien Roucariès <rouca@debian.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210916081721.237137-1-rouca@debian.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-10-27ARM: dts: spear3xx: Fix gmac nodeHerve Codina1-1/+1
[ Upstream commit 6636fec29cdf6665bd219564609e8651f6ddc142 ] On SPEAr3xx, ethernet driver is not compatible with the SPEAr600 one. Indeed, SPEAr3xx uses an earlier version of this IP (v3.40) and needs some driver tuning compare to SPEAr600. The v3.40 IP support was added to stmmac driver and this patch fixes this issue and use the correct compatible string for SPEAr3xx Signed-off-by: Herve Codina <herve.codina@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-10-27ARM: dts: at91: sama5d2_som1_ek: disable ISC node by defaultEugen Hristev1-1/+0
[ Upstream commit 4348cc10da6377a86940beb20ad357933b8f91bb ] Without a sensor node, the ISC will simply fail to probe, as the corresponding port node is missing. It is then logical to disable the node in the devicetree. If we add a port with a connection to a sensor endpoint, ISC can be enabled. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20210902121358.503589-1-eugen.hristev@microchip.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-10-27arm: dts: vexpress-v2p-ca9: Fix the SMB unit-addressRob Herring2-2/+2
[ Upstream commit 2e9edc07df2ec6f835222151fa4e536e9e54856a ] Based on 'ranges', the 'bus@4000000' node unit-address is off by 1 '0'. Link: https://lore.kernel.org/r/20210819184239.1192395-5-robh@kernel.org Cc: Andre Przywara <andre.przywara@arm.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-10-20ARM: dts: bcm2711-rpi-4-b: Fix pcie0's unit address formattingNicolas Saenz Julienne1-1/+2
commit 13dbc954b3c9a9de0ad5b7279e8d3b708d31068b upstream. dtbs_check currently complains that: arch/arm/boot/dts/bcm2711-rpi-4-b.dts:220.10-231.4: Warning (pci_device_reg): /scb/pcie@7d500000/pci@1,0: PCI unit address format error, expected "0,0" Unsurprisingly pci@0,0 is the right address, as illustrated by its reg property: &pcie0 { pci@0,0 { /* * As defined in the IEEE Std 1275-1994 document, * reg is a five-cell address encoded as (phys.hi * phys.mid phys.lo size.hi size.lo). phys.hi * should contain the device's BDF as 0b00000000 * bbbbbbbb dddddfff 00000000. The other cells * should be zero. */ reg = <0 0 0 0 0>; }; }; The device is clearly 0. So fix it. Also add a missing 'device_type = "pci"'. Fixes: 258f92d2f840 ("ARM: dts: bcm2711: Add reset controller to xHCI node") Suggested-by: Rob Herring <robh@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210831125843.1233488-1-nsaenzju@redhat.com Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-20ARM: dts: bcm2711-rpi-4-b: fix sd_io_1v8_reg regulator statesStefan Wahren1-2/+2
commit b55ec7528879a822a4d350248daa04bbb27f25fd upstream. DT schema check complains at sd_io_1v8_reg about the following: [1800000, 1, 3300000, 0] is too long Additional items are not allowed (3300000, 0 were unexpected) So fix the states definition. Fixes: 7dbe8c62ceeb ("ARM: dts: Add minimal Raspberry Pi 4 support") Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Link: https://lore.kernel.org/r/1628334401-6577-3-git-send-email-stefan.wahren@i2se.com Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-20ARM: dts: bcm2711: fix MDIO #address- and #size-cellsStefan Wahren1-2/+2
commit 2faff6737a8a684b077264f0aed131526c99eec4 upstream. The values of #address-cells and #size-cells are swapped. Fix this and avoid the following DT schema warnings for mdio@e14: #address-cells:0:0: 1 was expected #size-cells:0:0: 0 was expected Fixes: be8af7a9e3cc ("ARM: dts: bcm2711-rpi-4: Enable GENET support") Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Link: https://lore.kernel.org/r/1628334401-6577-2-git-send-email-stefan.wahren@i2se.com Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-20ARM: dts: bcm2711-rpi-4-b: Fix usb's unit addressNicolas Saenz Julienne1-2/+2
commit 3f32472854614d6f53b09b4812372dba9fc5c7de upstream. The unit address is supposed to represent '<device>,<function>'. Which are both 0 for RPi4b's XHCI controller. On top of that although OpenFirmware states bus number goes in the high part of the last reg parameter, FDT doesn't seem to care for it[1], so remove it. [1] https://patchwork.kernel.org/project/linux-arm-kernel/patch/20210830103909.323356-1-nsaenzju@redhat.com/#24414633 Fixes: 258f92d2f840 ("ARM: dts: bcm2711: Add reset controller to xHCI node") Suggested-by: Rob Herring <robh@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210831125843.1233488-2-nsaenzju@redhat.com Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-08-23 04:16:06 +0000