summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts
AgeCommit message (Collapse)AuthorFilesLines
2024-08-22ARM: dts: aspeed: Fix coprocessor interrupt controller node nameAndrew Jeffery2-2/+2
Squash schema warnings such as: arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-galaxy100.dtb: copro-interrupt-controller@1e6c2000: $nodename:0: 'copro-interrupt-controller@1e6c2000' does not match '^interrupt-controller(@[0-9a-f,]+)*$' Link: https://lore.kernel.org/r/20240802-dt-warnings-bmc-dts-cleanups-v1-1-1cb1378e5fcd@codeconstruct.com.au Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: mtmitchell: Add LEDsChanh Nguyen1-0/+31
Add LED nodes as the gpio-leds devices. They are led-bmc-ready, led-sw-heartbeat, led-identify, led-fault, led-fan-fault, led-psu-fault Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com> Link: https://lore.kernel.org/r/20240806071806.1666550-6-chanh@os.amperecomputing.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: mtmitchell: Enable i2c10 and i2c15Chanh Nguyen1-0/+23
Enable the BMC I2C10. Enable the BMC I2C15 and add the GPIO Expander as a child node. Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com> Link: https://lore.kernel.org/r/20240806071806.1666550-5-chanh@os.amperecomputing.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: mtmitchell: Add Riser cardsChanh Nguyen1-0/+64
Define the I2C alias ports for the riser cards. Add the i2c muxes to switch to the i2c alias ports and the eeprom nodes to read the FRU contents on riser cards. Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com> Link: https://lore.kernel.org/r/20240806071806.1666550-4-chanh@os.amperecomputing.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: mtmitchell: Add I2C temperature sensor alias portsChanh Nguyen1-0/+8
Add the I2C alias ports to read temperature sensors via channels of the I2C muxes. Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com> Link: https://lore.kernel.org/r/20240806071806.1666550-3-chanh@os.amperecomputing.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: mtjade, mtmitchell: Add OCP temperature sensorsChanh Nguyen2-0/+44
Define I2C alias ports from I2C Switch 0x70 at BMC I2C5. Add the tmp421 sensors via the I2C alias ports as OCP device temperature sensors. Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com> Link: https://lore.kernel.org/r/20240806071806.1666550-2-chanh@os.amperecomputing.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: catalina: add Meta Catalina BMCPotin Lai2-0/+980
Add linux device tree entry for Meta(Facebook) Catalina compute-tray BMC using AT2600 SoC. Signed-off-by: Potin Lai <potin.lai.pt@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240805-potin-catalina-dts-v7-2-286bfd2ab93b@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: minerva: add host0-ready pinYang Chen1-1/+1
Add host0-ready pin for phosphor-state-manager. Signed-off-by: Yang Chen <yangchen.openbmc@gmail.com> Link: https://lore.kernel.org/r/20240711130501.2900301-2-yangchen.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: minerva: Add spi-gpioYang Chen1-0/+21
Add spi-gpio for TPM device. Signed-off-by: Yang Chen <yang.chen@quantatw.com> Link: https://lore.kernel.org/r/20240626130332.929534-18-yangchen.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: minerva: add ltc4287 deviceYang Chen1-0/+6
Enable LTC4287 device on i2c-0. Signed-off-by: Yang Chen <yangchen.openbmc@gmail.com> Link: https://lore.kernel.org/r/20240626130332.929534-17-yangchen.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: minerva: remove unused power deviceYang Chen1-10/+0
Remove unused power device. Signed-off-by: Yang Chen <yangchen.openbmc@gmail.com> Link: https://lore.kernel.org/r/20240626130332.929534-16-yangchen.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: minerva: Switch the i2c bus numberYang Chen1-2/+2
Switch the i2c bus number to map the i2c tag according to the hardware design. Signed-off-by: Yang Chen <yang.chen@quantatw.com> Link: https://lore.kernel.org/r/20240626130332.929534-15-yangchen.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: minerva: revise sgpio line nameYang Chen1-118/+118
Revise the SGPIO naming to mapping the SGPIO from the CPLD. Signed-off-by: Yang Chen <yang.chen@quantatw.com> Link: https://lore.kernel.org/r/20240626130332.929534-14-yangchen.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: minerva: add power monitor xdp710Yang Chen1-0/+5
Add HSC xdp710 on i2c bus0. Signed-off-by: Yang Chen <yang.chen@quantatw.com> Link: https://lore.kernel.org/r/20240626130332.929534-13-yangchen.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: minerva: add tmp75 sensorYang Chen1-0/+28
Add tmp75 sensor on the i2c bus connect to each fan board. Signed-off-by: Yang Chen <yang.chen@quantatw.com> Link: https://lore.kernel.org/r/20240626130332.929534-12-yangchen.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: minerva: enable ehci0 for USBYang Chen1-0/+4
Enable ehci0 for USB. Signed-off-by: Yang Chen <yang.chen@quantatw.com> Link: https://lore.kernel.org/r/20240626130332.929534-11-yangchen.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: minerva: add linename of two pinsYang Chen1-2/+2
Add linename of two pins for power good/control. Signed-off-by: Yang Chen <yang.chen@quantatw.com> Link: https://lore.kernel.org/r/20240626130332.929534-10-yangchen.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: minerva: Add adc sensors for fan boardYang Chen1-0/+144
Add ina238 support to read the sensors in front of fans. Signed-off-by: Yang Chen <yang.chen@quantatw.com> Link: https://lore.kernel.org/r/20240626130332.929534-9-yangchen.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: minerva: Define the LEDs node nameYang Chen1-2/+26
Define the LEDs node name. Signed-off-by: Yang Chen <yang.chen@quantatw.com> Link: https://lore.kernel.org/r/20240626130332.929534-8-yangchen.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: minerva: remove unused bus and deviceYang Chen1-4/+0
Remove unused bus and device. Signed-off-by: Yang Chen <yang.chen@quantatw.com> Link: https://lore.kernel.org/r/20240626130332.929534-7-yangchen.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: minerva: enable mdio3Yang Chen1-4/+4
Change usage of I2C bus 11 to mdio3. Signed-off-by: Yang Chen <yang.chen@quantatw.com> Link: https://lore.kernel.org/r/20240626130332.929534-6-yangchen.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: minerva: change RTC referenceYang Chen1-4/+5
Change the RTC reference from on-chip to externel on i2c bus 9 and address is 0x51. Signed-off-by: Yang Chen <yang.chen@quantatw.com> Link: https://lore.kernel.org/r/20240626130332.929534-5-yangchen.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: minerva: add eeprom on i2c busYang Chen1-0/+10
Add eeprom on the i2c-9 address 0x50 and i2c-15 address 0x56. Signed-off-by: Yang Chen <yang.chen@quantatw.com> Link: https://lore.kernel.org/r/20240626130332.929534-4-yangchen.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: minerva: change aliases for uartYang Chen1-1/+2
Change and add aliases name for uart interface. Signed-off-by: Yang Chen <yang.chen@quantatw.com> Link: https://lore.kernel.org/r/20240626130332.929534-3-yangchen.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-22ARM: dts: aspeed: minerva: change the address of tmp75Yang Chen1-2/+2
Revise the address of tmp75 on I2C bus 1 from 0x48 to 0x4f due to design change. Signed-off-by: Yang Chen <yang.chen@quantatw.com> Link: https://lore.kernel.org/r/20240626130332.929534-2-yangchen.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2024-08-20ARM: dts: bcm-mobile: Split out nodes used by both BCM21664 and BCM23550Artur Weber3-651/+391
The BCM21664 is nearly identical in terms of register layout to the BCM23550. Move the shared nodes into a new file, bcm2166x-common.dtsi, and make both bcm21664.dtsi and bcm23550.dtsi include it. This new common file is based on the former bcm23550.dtsi file, and inherits its licensing. Signed-off-by: Artur Weber <aweber.kernel@gmail.com> Link: https://lore.kernel.org/r/20240729-bcm21664-common-v2-2-ebc21a89bf63@gmail.com Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
2024-08-20ARM: dts: aspeed: System1: Updates to BMC boardNinad Palsule1-3/+3
- Changed temperature sensor monitor chip from tmp423 to tmp432 Signed-off-by: Ninad Palsule <ninad@linux.ibm.com> Reviewed-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20240605160604.2135840-1-ninad@linux.ibm.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-08-20ARM: dts: aspeed: convert ASRock SPC621D8HM3 NVMEM content to layout syntaxRafał Miłecki1-4/+8
Use cleaner (and non-deprecated) bindings syntax. See commit bd912c991d2e ("dt-bindings: nvmem: layouts: add fixed-layout") for details. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Zev Weiss <zev@bewilderbeest.net> Link: https://lore.kernel.org/r/20240520063044.4885-1-zajec5@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-08-20ARM: dts: aspeed: Add IBM P11 Fuji BMC systemEddie James2-0/+3882
Add the device tree for the new BMC system. The Fuji is a P11 system with eight processors. Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Ninad Palsule <ninad@linux.ibm.com> Link: https://lore.kernel.org/r/20240522192524.3286237-17-eajames@linux.ibm.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-08-20ARM: dts: aspeed: Add IBM P11 Blueridge 4U BMC systemEddie James1-0/+21
The 4U Blueridge is identical to the Blueridge system but has two extra power supplies. Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Ninad Palsule <ninad@linux.ibm.com> Link: https://lore.kernel.org/r/20240522192524.3286237-16-eajames@linux.ibm.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-08-20ARM: dts: aspeed: Add IBM P11 Blueridge BMC systemEddie James2-0/+1692
Add the device tree for the new BMC system. The Blueridge is a P11 system with four processors. Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Ninad Palsule <ninad@linux.ibm.com> Link: https://lore.kernel.org/r/20240522192524.3286237-15-eajames@linux.ibm.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-08-20ARM: dts: aspeed: Add IBM P11 FSI devicesEddie James1-0/+1539
Add the P11 FSI device tree for use in upcoming BMC systems. Unlike P10, there is no system with only two processors, so only the quad processor FSI layout is necessary. Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Ninad Palsule <ninad@linux.ibm.com> Link: https://lore.kernel.org/r/20240522192524.3286237-14-eajames@linux.ibm.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2024-08-19ARM: dts: microchip: sama5d29_curiosity: Add reg_5v to supply PMIC nodesAndrei Simion1-0/+13
Align with the datasheet by adding regulator-5v which supplies each node from the regulator using phandle to regulator-5v through pvin[1-4]-supply and lvin-supply. Co-developed-by: Mihai Sain <mihai.sain@microchip.com> Signed-off-by: Mihai Sain <mihai.sain@microchip.com> Signed-off-by: Andrei Simion <andrei.simion@microchip.com> Link: https://lore.kernel.org/r/20240812135231.43744-8-andrei.simion@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2024-08-19ARM: dts: microchip: at91-sama5d27_wlsom1: Add reg_5v to supply PMIC nodesAndrei Simion1-0/+13
Align with the datasheet by adding regulator-5v which supplies each node from the regulator using phandle to regulator-5v through pvin[1-4]-supply and lvin-supply. Co-developed-by: Mihai Sain <mihai.sain@microchip.com> Signed-off-by: Mihai Sain <mihai.sain@microchip.com> Signed-off-by: Andrei Simion <andrei.simion@microchip.com> Link: https://lore.kernel.org/r/20240812135231.43744-7-andrei.simion@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2024-08-19ARM: dts: microchip: at91-sama5d2_icp: Add reg_5v to supply PMIC nodesAndrei Simion1-0/+13
Align with the datasheet by adding regulator-5v which supplies each node from the regulator using phandle to regulator-5v through pvin[1-4]-supply and lvin-supply. Co-developed-by: Mihai Sain <mihai.sain@microchip.com> Signed-off-by: Mihai Sain <mihai.sain@microchip.com> Signed-off-by: Andrei Simion <andrei.simion@microchip.com> Link: https://lore.kernel.org/r/20240812135231.43744-6-andrei.simion@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2024-08-19ARM: dts: microchip: at91-sama7g54_curiosity: Add reg_5v to supply PMIC nodesAndrei Simion1-0/+13
Align with the datasheet by adding regulator-5v which supplies each node from the regulator using phandle to regulator-5v through pvin[1-4]-supply and lvin-supply. Co-developed-by: Mihai Sain <mihai.sain@microchip.com> Signed-off-by: Mihai Sain <mihai.sain@microchip.com> Signed-off-by: Andrei Simion <andrei.simion@microchip.com> Link: https://lore.kernel.org/r/20240812135231.43744-5-andrei.simion@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2024-08-19ARM: dts: microchip: at91-sama7g5ek: Add reg_5v to supply PMIC nodesAndrei Simion1-0/+13
Align with the datasheet by adding regulator-5v which supplies each node from the regulator using phandle to regulator-5v through pvin[1-4]-supply and lvin-supply. Co-developed-by: Mihai Sain <mihai.sain@microchip.com> Signed-off-by: Mihai Sain <mihai.sain@microchip.com> Signed-off-by: Andrei Simion <andrei.simion@microchip.com> Link: https://lore.kernel.org/r/20240812135231.43744-4-andrei.simion@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2024-08-14ARM: dts: qcom: add generic compat string to RPM glink channelsDmitry Baryshkov3-3/+3
Add the generic qcom,smd-rpm compatible to RPM nodes to follow the schema. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Konrad Dybcio <konradybcio@kernel.org> Link: https://lore.kernel.org/r/20240729-fix-smd-rpm-v2-4-0776408a94c5@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-08-14ARM: dts: qcom: msm8226-microsoft-common: Add inertial sensorsRayyan Ansari3-0/+32
Add nodes for the Asahi Kasei AK09911 magnetometer and the Kionix KX022-1020 accelerometer, both of which are connected over i2c2, in the common device tree for msm8x26 Lumias. Moneypenny (Lumia 630) does not have a magnetometer, and so the node is deleted. Tesla's (Lumia 830's) magnetometer is currently unknown. Signed-off-by: Rayyan Ansari <rayyan@ansari.sh> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20240714173431.54332-4-rayyan@ansari.sh Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-08-14ARM: dts: qcom: msm8226: Convert APCS usages to mbox interfaceLuca Weiss1-3/+3
Since we now have the apcs set up as a mailbox provider, let's use the interface for all drivers where possible. Signed-off-by: Luca Weiss <luca@lucaweiss.eu> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20240619-msm8226-cpufreq-v1-7-85143f5291d1@lucaweiss.eu Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-08-14ARM: dts: qcom: msm8226: Hook up CPU coolingLuca Weiss1-0/+25
Add cooling-maps for the CPU thermal zones so the driver can actually do something when the CPU temperature rises too much. Signed-off-by: Luca Weiss <luca@lucaweiss.eu> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20240619-msm8226-cpufreq-v1-6-85143f5291d1@lucaweiss.eu Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-08-14ARM: dts: qcom: msm8226: Add CPU frequency scaling supportLuca Weiss1-3/+100
Add a node for the a7pll with its frequencies. With this we can use the apcs-kpss-global driver for the apcs node and use the apcs to scale the CPU frequency according to the opp-table. At the same time unfortunately we need to provide the gcc node xo_board instead of the XO via rpmcc since otherwise we'll have a circular dependency between apcs, gcc and the rpm. Signed-off-by: Luca Weiss <luca@lucaweiss.eu> Link: https://lore.kernel.org/r/20240619-msm8226-cpufreq-v1-5-85143f5291d1@lucaweiss.eu Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-08-13ARM: dts: bcm2837/bcm2712: adjust local intc node namesStefan Wahren1-1/+1
After converting the bcm2836-l1-intc DT binding to YAML, the DT schema checks gave warnings like: 'local_intc@40000000' does not match '^interrupt-controller(@[0-9a-f,]+)*$' So fix them accordingly. Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Link: https://lore.kernel.org/r/20240812200358.4061-4-wahrenst@gmx.net Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
2024-08-13ARM: dts: imx1/imx27: Use dma-controller as node nameFabio Estevam2-2/+2
According to fsl,imx-dma.yaml, the node name must be dma-controller. Change it accordingly to fix the following dt-schema warnings: 'dma@10001000' does not match '^dma-controller(@.*)?$' Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-08-12ARM: dts: imx6dl-yapp43: Increase LED current to match the yapp4 HW designMichal Vokáč1-6/+6
On the imx6dl-yapp4 revision based boards, the RGB LED is not driven directly by the LP5562 driver but through FET transistors. Hence the LED current is not determined by the driver but by the LED series resistors. On the imx6dl-yapp43 revision based boards, we removed the FET transistors to drive the LED directly from the LP5562 but forgot to tune the output current to match the previous HW design. Set the LED current on imx6dl-yapp43 based boards to the same values measured on the imx6dl-yapp4 boards and limit the maximum current to 20mA. Fixes: 7da4734751e0 ("ARM: dts: imx6dl-yapp43: Add support for new HW revision of the IOTA board") Cc: <stable@vger.kernel.org> Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-08-12ARM: dts: imx53-qsb-hdmi: Merge display0 nodeLiu Ying1-2/+0
It's not necessary to split display0 node. Merge it to save two lines. Signed-off-by: Liu Ying <victor.liu@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-08-12ARM: dts: imx53-qsb-hdmi: Do not disable TVELiu Ying1-4/+0
SII9022 and TVE are connected with IPU DI0 and IPU DI1 respectively, so they are in two different display pipelines and may run simultaneously. Keep TVE being enabled as imx53-qsb-common.dtsi does by not setting it's status property to "disabled". Fixes: eeb403df953f ("ARM: dts: imx53-qsb: add support for the HDMI expander") Signed-off-by: Liu Ying <victor.liu@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-08-12ARM: dts: nuvoton: wpcm450: align LED and GPIO keys node name with bindingsKrzysztof Kozlowski1-3/+3
Bindings expect the LED and GPIO keys node names to follow certain pattern, see dtbs_check warnings: nuvoton-wpcm450-supermicro-x9sci-ln4f.dtb: gpio-keys: 'uid' does not match any of the regexes: '^(button|event|key|switch|(button|event|key|switch)... Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Link: https://lore.kernel.org/r/20240701164915.577068-1-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-08-12arm: dts: realview: Add/drop missing/spurious unit-addresesRob Herring (Arm)4-4/+4
Various nodes on the Arm Realview boards have missing or spurious unit-addresses. Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20240528191510.1444068-1-robh@kernel.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-08-08ARM: dts: microchip: at91: align LED node name with bindingsKrzysztof Kozlowski4-19/+19
Bindings expect the LED node names to follow certain pattern, see dtbs_check warnings: at91sam9g15ek.dtb: leds: 'pb18', 'pd21' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Alexander Dahl <ada@thorsis.com> Link: https://lore.kernel.org/r/20240701164952.577277-1-krzysztof.kozlowski@linaro.org Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
generated by cgit v1.2.3 (git 2.25.1) at 2025-08-04 15:26:03 +0000