summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts
AgeCommit message (Collapse)AuthorFilesLines
2024-08-08ARM: dts: microchip: sam9x60: Move i2c address/size to dtsiAlexander Dahl3-6/+26
These properties are common for all i2c subnodes. Allows to add i2c device nodes (like an rtc for example) in other .dts files including sam9x60.dtsi without requiring to repeat these properties for each i2c device again and again. Found on a custom board after adding this in .dts: &flx5 { atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>; status = "okay"; i2c5: i2c@600 { pinctrl-0 = <&pinctrl_flx5_default>; status = "okay"; pcf8523: rtc@68 { compatible = "nxp,pcf8523"; reg = <0x68>; }; }; }; … which created a warning like this: […]:236.4-17: Warning (reg_format): /ahb/apb/flexcom@f0004000/i2c@600/rtc@68:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) […]: Warning (pci_device_reg): Failed prerequisite 'reg_format' […]: Warning (pci_device_bus_num): Failed prerequisite 'reg_format' […]: Warning (simple_bus_reg): Failed prerequisite 'reg_format' […]/linux-6.6.25/arch/arm/boot/dts/microchip/sam9x60.dtsi:283.19-299.7: Warning (i2c_bus_bridge): /ahb/apb/flexcom@f0004000/i2c@600: incorrect #address-cells for I2C bus also defined at […]:228.16-238.4 […]/linux-6.6.25/arch/arm/boot/dts/microchip/sam9x60.dtsi:283.19-299.7: Warning (i2c_bus_bridge): /ahb/apb/flexcom@f0004000/i2c@600: incorrect #size-cells for I2C bus also defined at […]:228.16-238.4 […]: Warning (i2c_bus_reg): Failed prerequisite 'reg_format' […]: Warning (i2c_bus_reg): Failed prerequisite 'i2c_bus_bridge' […]: Warning (spi_bus_reg): Failed prerequisite 'reg_format' […]:234.19-237.5: Warning (avoid_default_addr_size): /ahb/apb/flexcom@f0004000/i2c@600/rtc@68: Relying on default #address-cells value […]:234.19-237.5: Warning (avoid_default_addr_size): /ahb/apb/flexcom@f0004000/i2c@600/rtc@68: Relying on default #size-cells value […]: Warning (avoid_unnecessary_addr_size): Failed prerequisite 'avoid_default_addr_size' […]: Warning (unique_unit_address): Failed prerequisite 'avoid_default_addr_size' This probably should have been done with commit 84f23f3284d5 ("ARM: dts: at91: sam9x60: move flexcom definitions") already, where those address-cells and size-cells properties were left in the board .dts files instead of moving them to the dtsi. Signed-off-by: Alexander Dahl <ada@thorsis.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20240528153109.439407-1-ada@thorsis.com [claudiu.beznea: adjusted commit message as the properties are not required anymore] Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2024-08-07ARM: dts: microchip: at91-sama7g5ek: add EEPROMsClaudiu Beznea1-0/+40
The main boot sequence for Microchip AT91 devices is one of the following: 1/ ROM BOOT -> AT91Bootstrap -> U-Boot -> Linux Kernel 2/ ROM BOOT -> AT91Bootstrap -> Linux Kernel For case 1/ U-Boot is the stage where the Ethernet MAC addresses are set. For case 2/ where U-Boot is skipped the Ethernet MAC addresses need to be configured in Linux. For this add EEPROMs and nvmem-layout to describe EUI48 MAC address regions. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> [andrei.simion@microchip.com: Add nvmem-layout to describe eui48 mac region. Align compatible name with datasheet. Reword commit message.] Signed-off-by: Andrei Simion <andrei.simion@microchip.com> [claudiu.beznea: adjusted the new commit message] Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev> Link: https://lore.kernel.org/r/20240703084704.197697-3-andrei.simion@microchip.com
2024-08-05ARM: dts: omap3-n900: correct the accelerometer orientationSicelo A. Mhlongo1-1/+1
Negate the values reported for the accelerometer z-axis in order to match Documentation/devicetree/bindings/iio/mount-matrix.txt. Fixes: 14a213dcb004 ("ARM: dts: n900: use iio driver for accelerometer") Signed-off-by: Sicelo A. Mhlongo <absicsz@gmail.com> Reviewed-By: Andreas Kemnade <andreas@kemnade.info> Link: https://lore.kernel.org/r/20240722113137.3240847-1-absicsz@gmail.com Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2024-08-05ARM: dts: imx6sx-udoo-neo: Properly configure ENET_REFFabio Estevam1-0/+5
By default, the ENET_REF is configured at 125MHz on i.MX6SX, which works well for boards that operate in RGMII mode. The imx6sx-udoo-neo has a KSZ8091 Ethernet PHY that is connected via RMII interface, so a 50MHz ENET_REF clock is expected. Describe the IMX6SX_CLK_ENET_REF accordingly. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-08-04arm: dts: arm: versatile-ab: Fix duplicate clock node nameRob Herring (Arm)1-1/+1
Commit 04f08ef291d4 ("arm/arm64: dts: arm: Use generic clock and regulator nodenames") renamed nodes and created 2 "clock-24000000" nodes (at different paths). The kernel can't handle these duplicate names even though they are at different paths. Fix this by renaming one of the nodes to "clock-pclk". This name is aligned with other Arm boards (those didn't have a known frequency to use in the node name). Fixes: 04f08ef291d4 ("arm/arm64: dts: arm: Use generic clock and regulator nodenames") Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Tested-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-07-30ARM: dts: ti: omap: am335x-wega: Fix audio clock providerDominik Haller1-4/+3
Bit clock and frame clock are provided by the mcasp. Change the simple card settings regarding the clock provider and the mclk-fs for usage with typical 44.1 kHz and 48 kHz sample rates. Signed-off-by: Dominik Haller <d.haller@phytec.de> Link: https://lore.kernel.org/r/20240730092353.10209-2-d.haller@phytec.de Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2024-07-30ARM: dts: ti: omap: am335x-regor: Fix RS485 settingsSteffen Hemer1-1/+9
RTS pin seems to have inverted behavior on am335x, other than expected with default "rs485-rts-active-high" (instead of low on idle, high on send, it is the opposite). Transceiver datasheet also suggests a pulldown. Add includes to pin definitions that are used. Signed-off-by: Steffen Hemer <s.hemer@phytec.de> Signed-off-by: Dominik Haller <d.haller@phytec.de> Link: https://lore.kernel.org/r/20240730092353.10209-1-d.haller@phytec.de Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2024-07-30ARM: dts: omap: am335x-bone: convert NVMEM content to layout syntaxRafał Miłecki2-24/+52
Use cleaner (and non-deprecated) bindings syntax. See commit bd912c991d2e ("dt-bindings: nvmem: layouts: add fixed-layout") for details. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Link: https://lore.kernel.org/r/20240523042750.26238-1-zajec5@gmail.com Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2024-07-30ARM: dts: am335x-bone-common: Increase MDIO reset deassert timeColin Foster1-1/+1
Prior to commit df16c1c51d81 ("net: phy: mdio_device: Reset device only when necessary") MDIO reset deasserts were performed twice during boot. Now that the second deassert is no longer performed, device probe failures happen due to the change in timing with the following error message: SMSC LAN8710/LAN8720: probe of 4a101000.mdio:00 failed with error -5 Restore the original effective timing, which resolves the probe failures. Signed-off-by: Colin Foster <colin.foster@in-advantage.com> Link: https://lore.kernel.org/r/20240531183817.2698445-1-colin.foster@in-advantage.com Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2024-07-29ARM: dts: broadcom: bcm21664: Move chosen node into Garnet DTSArtur Weber2-4/+4
The serial console settings in the chosen node are device-specific, not SoC-specific. Move the chosen node out of bcm21664.dtsi and into the only DTS that uses it, bcm21664-garnet.dts. Signed-off-by: Artur Weber <aweber.kernel@gmail.com> Link: https://lore.kernel.org/r/20240729-bcm21664-common-v2-1-ebc21a89bf63@gmail.com Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
2024-07-29ARM: dts: broadcom: convert NVMEM content to layout syntaxRafał Miłecki2-8/+16
Use cleaner (and non-deprecated) bindings syntax. See commit bd912c991d2e ("dt-bindings: nvmem: layouts: add fixed-layout") for details. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Link: https://lore.kernel.org/r/20240516084737.2789-1-zajec5@gmail.com Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
2024-07-29ARM: dts: rockchip: use constant for HCLK_SFC on rk3128Heiko Stuebner1-1/+1
Due to inter-branch dependencies, it was necessary to add the rk3128 sfc controller with its hclk_sfc using the numeric clock id value instead of the nicer constant from the binding. Now that it's available, change over to this constant. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20240623215631.440399-1-heiko@sntech.de Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-07-28ARM: dts: qcom: {a,i}pq8064: correct clock-names in sata nodeRayyan Ansari2-3/+3
Correct the clock-names in the AHCI SATA controller node to adhere to the bindings. Signed-off-by: Rayyan Ansari <rayyan.ansari@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240717094914.17931-2-rayyan.ansari@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-07-28ARM: dts: qcom: apq8064: drop reg-names on sata-phy nodeRayyan Ansari1-1/+0
Remove the reg-names property in the sata-phy node as it is not present in the bindings and is not required by the driver. Signed-off-by: Rayyan Ansari <rayyan.ansari@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20240715130854.53501-3-rayyan.ansari@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-07-28ARM: dts: qcom: msm8974pro-samsung-klte: Add pstore nodeBingwu Zhang2-1/+14
Add pstore node to allow for retrieving crash logs. Signed-off-by: Bingwu Zhang <xtexchooser@duck.com> Link: https://lore.kernel.org/r/20240715122201.345426-2-xtex@envs.net Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-07-28ARM: dts: qcom: ipq4019: adhere to pinctrl dtschemaRayyan Ansari7-67/+50
Pass dtbs_check for qcom,ipq4019-pinctrl.yaml. Signed-off-by: Rayyan Ansari <rayyan.ansari@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240711110545.31641-7-rayyan.ansari@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-07-28ARM: dts: qcom: ipq8064: adhere to pinctrl dtschemaRayyan Ansari3-114/+87
Pass dtbs_check for qcom,ipq8064-pinctrl.yaml. Also remove invalid "bias-none" property, which I have assumed to mean "bias-disable". Signed-off-by: Rayyan Ansari <rayyan.ansari@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240711110545.31641-6-rayyan.ansari@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-07-28ARM: dts: qcom: apq8064: adhere to pinctrl dtschemaRayyan Ansari5-278/+166
Pass dtbs_check for qcom,apq8064-pinctrl.yaml. Signed-off-by: Rayyan Ansari <rayyan.ansari@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240711110545.31641-5-rayyan.ansari@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-07-28ARM: dts: qcom: asus,nexus7-flo: remove duplicate pinctrl handle in i2c nodesRayyan Ansari1-4/+0
Remove duplicate handle to i2c pins in the device tree, as they are already set in qcom-apq8064.dtsi. Signed-off-by: Rayyan Ansari <rayyan.ansari@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240711110545.31641-4-rayyan.ansari@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-07-28ARM: dts: qcom: apq8064-pins: correct error in drive-strength propertyRayyan Ansari1-6/+6
The "drive-strength" property was incorrectly spelt as "drive-strengh". Correct this. Signed-off-by: Rayyan Ansari <rayyan.ansari@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240711110545.31641-3-rayyan.ansari@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-07-28ARM: dts: qcom: pma8084: add pon nodeRayyan Ansari1-5/+11
Wrap existing pwrkey node inside a pon node, to conform to dt schema. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Rayyan Ansari <rayyan.ansari@linaro.org> Link: https://lore.kernel.org/r/20240725-pmic-bindings-v3-3-d7f6007b530d@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-07-16Merge tag 'net-next-6.11' of ↵Linus Torvalds2-9/+2
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Not much excitement - a handful of large patchsets (devmem among them) did not make it in time. Core & protocols: - Use local_lock in addition to local_bh_disable() to protect per-CPU resources in networking, a step closer for local_bh_disable() not to act as a big lock on PREEMPT_RT - Use flex array for netdevice priv area, ensure its cache alignment - Add a sysctl knob to allow user to specify a default rto_min at socket init time. Bit of a big hammer but multiple companies were independently carrying such patch downstream so clearly it's useful - Support scheduling transmission of packets based on CLOCK_TAI - Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned off using cpusets - Support multiple L2TPv3 UDP tunnels using the same 5-tuple address - Allow configuration of multipath hash seed, to both allow synchronizing hashing of two routers, and preventing partial accidental sync - Improve TCP compliance with RFC 9293 for simultaneous connect() - Support sending NAT keepalives in IPsec ESP in UDP states. Userspace IKE daemon had to do this before, but the kernel can better keep track of it - Support sending supervision HSR frames with MAC addresses stored in ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled - Introduce IPPROTO_SMC for selecting SMC when socket is created - Allow UDP GSO transmit from devices with no checksum offload - openvswitch: add packet sampling via psample, separating the sampled traffic from "upcall" packets sent to user space for forwarding - nf_tables: shrink memory consumption for transaction objects Things we sprinkled into general kernel code: - Power Sequencing subsystem (used by Qualcomm Bluetooth driver for QCA6390) [ Already merged separately - Linus ] - Add IRQ information in sysfs for auxiliary bus - Introduce guard definition for local_lock - Add aligned flavor of __cacheline_group_{begin, end}() markings for grouping fields in structures BPF: - Notify user space (via epoll) when a struct_ops object is getting detached/unregistered - Add new kfuncs for a generic, open-coded bits iterator - Enable BPF programs to declare arrays of kptr, bpf_rb_root, and bpf_list_head - Support resilient split BTF which cuts down on duplication and makes BTF as compact as possible WRT BTF from modules - Add support for dumping kfunc prototypes from BTF which enables both detecting as well as dumping compilable prototypes for kfuncs - riscv64 BPF JIT improvements in particular to add 12-argument support for BPF trampolines and to utilize bpf_prog_pack for the latter - Add the capability to offload the netfilter flowtable in XDP layer through kfuncs Driver API: - Allow users to configure IRQ tresholds between which automatic IRQ moderation can choose - Expand Power Sourcing (PoE) status with power, class and failure reason. Support setting power limits - Track additional RSS contexts in the core, make sure configuration changes don't break them - Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated ESP data paths - Support updating firmware on SFP modules Tests and tooling: - mptcp: use net/lib.sh to manage netns - TCP-AO and TCP-MD5: replace debug prints used by tests with tracepoints - openvswitch: make test self-contained (don't depend on OvS CLI tools) Drivers: - Ethernet high-speed NICs: - Broadcom (bnxt): - increase the max total outstanding PTP TX packets to 4 - add timestamping statistics support - implement netdev_queue_mgmt_ops - support new RSS context API - Intel (100G, ice, idpf): - implement FEC statistics and dumping signal quality indicators - support E825C products (with 56Gbps PHYs) - nVidia/Mellanox: - support HW-GRO - mlx4/mlx5: support per-queue statistics via netlink - obey the max number of EQs setting in sub-functions - AMD/Solarflare: - support new RSS context API - AMD/Pensando: - ionic: rework fix for doorbell miss to lower overhead and skip it on new HW - Wangxun: - txgbe: support Flow Director perfect filters - Ethernet NICs consumer, embedded and virtual: - Add driver for Tehuti Networks TN40xx chips - Add driver for Meta's internal NIC chips - Add driver for Ethernet MAC on Airoha EN7581 SoCs - Add driver for Renesas Ethernet-TSN devices - Google cloud vNIC: - flow steering support - Microsoft vNIC: - support page sizes other than 4KB on ARM64 - vmware vNIC: - support latency measurement (update to version 9) - VirtIO net: - support for Byte Queue Limits - support configuring thresholds for automatic IRQ moderation - support for AF_XDP Rx zero-copy - Synopsys (stmmac): - support for STM32MP13 SoC - let platforms select the right PCS implementation - TI: - icssg-prueth: add multicast filtering support - icssg-prueth: enable PTP timestamping and PPS - Renesas: - ravb: improve Rx performance 30-400% by using page pool, theaded NAPI and timer-based IRQ coalescing - ravb: add MII support for R-Car V4M - Cadence (macb): - macb: add ARP support to Wake-On-LAN - Cortina: - use phylib for RX and TX pause configuration - Ethernet switches: - nVidia/Mellanox: - support configuration of multipath hash seed - report more accurate max MTU - use page_pool to improve Rx performance - MediaTek: - mt7530: add support for bridge port isolation - Qualcomm: - qca8k: add support for bridge port isolation - Microchip: - lan9371/2: add 100BaseTX PHY support - NXP: - vsc73xx: implement VLAN operations - Ethernet PHYs: - aquantia: enable support for aqr115c - aquantia: add support for PHY LEDs - realtek: add support for rtl8224 2.5Gbps PHY - xpcs: add memory-mapped device support - add BroadR-Reach link mode and support in Broadcom's PHY driver - CAN: - add document for ISO 15765-2 protocol support - mcp251xfd: workaround for erratum DS80000789E, use timestamps to catch when device returns incorrect FIFO status - WiFi: - mac80211/cfg80211: - parse Transmit Power Envelope (TPE) data in mac80211 instead of in drivers - improvements for 6 GHz regulatory flexibility - multi-link improvements - support multiple radios per wiphy - remove DEAUTH_NEED_MGD_TX_PREP flag - Intel (iwlwifi): - bump FW API to 91 for BZ/SC devices - report 64-bit radiotap timestamp - enable P2P low latency by default - handle Transmit Power Envelope (TPE) advertised by AP - remove support for older FW for new devices - fast resume (keeping the device configured) - mvm: re-enable Multi-Link Operation (MLO) - aggregation (A-MSDU) optimizations - MediaTek (mt76): - mt7925 Multi-Link Operation (MLO) support - Qualcomm (ath10k): - LED support for various chipsets - Qualcomm (ath12k): - remove unsupported Tx monitor handling - support channel 2 in 6 GHz band - support Spatial Multiplexing Power Save (SMPS) in 6 GHz band - supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID Advertisements (EMA) - support dynamic VLAN - add panic handler for resetting the firmware state - DebugFS support for datapath statistics - WCN7850: support for Wake on WLAN - Microchip (wilc1000): - read MAC address during probe to make it visible to user space - suspend/resume improvements - TI (wl18xx): - support newer firmware versions - RealTek (rtw89): - preparation for RTL8852BE-VT support - Wake on WLAN support for WiFi 6 chips - 36-bit PCI DMA support - RealTek (rtlwifi): - RTL8192DU support - Broadcom (brcmfmac): - Management Frame Protection support (to enable WPA3) - Bluetooth: - qualcomm: use the power sequencer for QCA6390 - btusb: mediatek: add ISO data transmission functions - hci_bcm4377: add BCM4388 support - btintel: add support for BlazarU core - btintel: add support for Whale Peak2 - btnxpuart: add support for AW693 A1 chipset - btnxpuart: add support for IW615 chipset - btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591" * tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1589 commits) eth: fbnic: Fix spelling mistake "tiggerring" -> "triggering" tcp: Replace strncpy() with strscpy() wifi: ath12k: fix build vs old compiler tcp: Don't access uninit tcp_rsk(req)->ao_keyid in tcp_create_openreq_child(). eth: fbnic: Write the TCAM tables used for RSS control and Rx to host eth: fbnic: Add L2 address programming eth: fbnic: Add basic Rx handling eth: fbnic: Add basic Tx handling eth: fbnic: Add link detection eth: fbnic: Add initial messaging to notify FW of our presence eth: fbnic: Implement Rx queue alloc/start/stop/free eth: fbnic: Implement Tx queue alloc/start/stop/free eth: fbnic: Allocate a netdevice and napi vectors with queues eth: fbnic: Add FW communication mechanism eth: fbnic: Add message parsing for FW messages eth: fbnic: Add register init to set PCIe/Ethernet device config eth: fbnic: Allocate core device specific structures and devlink interface eth: fbnic: Add scaffolding for Meta's NIC driver PCI: Add Meta Platforms vendor ID net/sched: cls_flower: propagate tca[TCA_OPTIONS] to NL_REQ_ATTR_CHECK ...
2024-07-16Merge tag 'soc-dt-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds186-908/+4567
Pull SoC dt updates from Arnd Bergmann: "The devicetree updates are fairly well spread out across platforms, with Qualcomm making up about a third of the total. There are three new SoCs in existing product families this: - NXP i.MX95 is a variant of i.MX93, now with six Cortex-A55 cores instead of just two as well as a GPU and more high-speed I/O devices. - Qualcomm QCS8550 is a variant of SM8550 for IOT devices - Airoha EN7581 is a 10G-PON network chip and related to the MT7981 Wireless router chip from its parent Mediatek. In total there are 58 new machines, including four riscv boards and eight for 32-bit arm. The most exciting new addition is probably a pair of laptops based on the Qualcomm x1e80100 (Snapdragon X1 Elite) chip, the Asus Vivobook S15 and the Lenovo Yoga Slim7x. Other noteworthy new additions are: - A total of 20 Qualcomm based machines, mostly Android devices from Samsung, Motorola and LG, as well as a wireless router and some reference designs - Six NXP i.MX based machines, mostly industrial boards along with some reference designs - Mediatek sees some interesting Filogic based routers including the "OpenWRT One", a few new Chromebooks as well as single-board computers. - Four machines from Solidrun based on Marvell cn913x, replacing the older Armada 8000 based counterparts - The four Amlogic machines are all set top boxes or reference designs for them - The nine new Rockchips machines are mostly single-board computers including some interesting ones based on the rk3588 chip like the ROCK 5 ITX board and the CM3588 with its four NVMe slots - The RISC-V boards are all single-board computers based on Starfive JH7110, Microchip MPFS and Allwinner D1, which all had similar boards already There are also a lot of updates to already supported machines, notably for the TI K3, Rockchips, Freescale and of course Qualcomm platforms" * tag 'soc-dt-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (846 commits) arm64: dts: allwinner: h616: add crypto engine node riscv: dts: add clock generator for Sophgo SG2042 SoC arm64: dts: rockchip: Add Xunlong Orange Pi 3B dt-bindings: arm: rockchip: Add Xunlong Orange Pi 3B arm64: dts: rockchip: Add Radxa ROCK 3B dt-bindings: arm: rockchip: Add Radxa ROCK 3B mailmap: Update Luca Weiss's email address ARM: dts: ixp4xx: nslu2: beeper uses PWM arm64: dts: rockchip: add ROCK 5 ITX board dt-bindings: arm: rockchip: Add ROCK 5 ITX board arm64: dts: rockchip: Add dma-names to uart1 on Pine64 rk3566 devices arm64: dts: rockchip: Add avdd supplies to hdmi on rock64 arm64: dts: qcom: msm8916-lg-c50: add initial dts for LG Leon LTE arm64: dts: qcom: msm8916-lg-m216: Add initial device tree dt-bindings: arm: qcom: Add msm8916 based LG devices ARM: dts: qcom: msm8960: correct memory base arm64: dts: qcom: ipq9574: Add icc provider ability to gcc dt-bindings: interconnect: Add Qualcomm IPQ9574 support arm64: dts: qcom: sm8150: Add video clock controller node arm64: dts: qcom: pm6150: Add vibrator ...
2024-07-09Merge tag 'qcom-arm32-for-6.11-2' of ↵Arnd Bergmann1-2/+2
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt One more Arm32 DeviceTree update for v6.11 This fixes the DeviceTree validation warning about MSM8960 /memory node not having a unit address. * tag 'qcom-arm32-for-6.11-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: ARM: dts: qcom: msm8960: correct memory base Link: https://lore.kernel.org/r/20240709191506.3285-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-07-09ARM: dts: amlogic: meson8b-ec100: align GPIO keys node name with bindingsKrzysztof Kozlowski1-2/+0
Bindings expect the GPIO keys node names to follow certain pattern, see dtbs_check warnings: meson8b-ec100.dtb: gpio-keys: '#address-cells', '#size-cells' do not match any of the regexes: '^(button|event|key|switch|(button|event|key|switch)... Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20240701165210.578817-1-krzysztof.kozlowski@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2024-07-08Merge tag 'v6.11-rockchip-dts32-2' of ↵Arnd Bergmann1-2/+1
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt Removal of a fallback ethernet-phy compatible that is not conformant to the binding. * tag 'v6.11-rockchip-dts32-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: Drop ethernet-phy-ieee802.3-c22 from PHY compatible string on edgeble-neu2 Link: https://lore.kernel.org/r/2169115.3Lj2Plt8kZ@diego Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-07-08Merge tag 'mvebu-dt-6.11-1' of ↵Arnd Bergmann51-279/+242
https://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/dt mvebu dt for 6.11 (part 1) armada-385: Add 7-segment LED display on x530 armada-385: Add Turris Omnia MCU related node armada-370 irqchip DT changes: Drop #size-cells from mpic node orion / kirkwood: few cleanups * tag 'mvebu-dt-6.11-1' of https://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: ARM: dts: turris-omnia: Add GPIO key node for front button ARM: dts: turris-omnia: Add MCU system-controller node ARM: dts: marvell: orion: align LED node name with bindings ARM: dts: marvell: orion5x-lswsgl: use 'gpios' property for LEDs ARM: dts: marvell: orion: drop incorrect address/size-cells in GPIO keys ARM: dts: marvell: orion: align GPIO keys node name with bindings ARM: dts: marvell: kirkwood: align LED node name with bindings ARM: dts: marvell: kirkwood: drop incorrect address/size-cells in GPIO keys ARM: dts: marvell: kirkwood: align GPIO keys node name with bindings ARM: dts: armada-{370-xp,375,38x,39x}: Drop #size-cells from mpic node ARM: dts: marvell: Add 7-segment LED display on x530 Link: https://lore.kernel.org/r/87zfqvixn4.fsf@BLaptop.bootlin.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-07-08Merge tag 'stm32-dt-for-v6.11-1' of ↵Arnd Bergmann16-26/+1615
https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt STM32 DT for v6.11, round 1 Highlights: ---------- -MCU: - Add syscfg missing clock on stm32f429. - MPU: - STM32MP13: - Add camera support on stm32mp135f-dk bord using DCMIPP and GC2145 sensor. - Document PWM output for stm32mp135f-dk - Add goodix touchscreen support on stm32mp135f-dk board. - Add new DH DHCOR / DHSBC board (Som + carrier board) based on STM32MP135F SoC. SOM part contains: STM32MP135F SoC, 512MB DDR2L RAM and eMMC/SDIO wifi module. The carrier boards embedds 2 RGMII ETH ports, USB-A,USB-C and an extansion connector. - Add Ethernet controller support on stm32mp135f-dk. It uses LAN8742A PHY based on RMII. - STMP32MP15: - Rework Octavo OSD32MP1 split for USB phy. - Add OP-TEE IRQ for asynchronous notification support. It allows OP-TEE to trig Linux. - STM32MP25: - Add OP-TEE IRQ for asynchronous notification support. It allows OP-TEE to trig Linux. - Enable firewall for RCC. - Add all U(s)ART nodes for stm32mp25. - Add 3 power domains for low power modes. - Add HPDMA support. - Add Ethernet controller (ETH2) support on stm32mp257f-ev1. It uses Realtek PHY based on RGMII. - Add and enable SCMI regulator support. * tag 'stm32-dt-for-v6.11-1' of https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (31 commits) arm64: dts: st: describe power supplies for stm32mp257f-ev1 board arm64: dts: st: add scmi regulators on stm32mp25 regulator: Add STM32MP25 regulator bindings ARM: dts: stm32: omit unused pinctrl groups from stm32mp13 dtb files arm64: dts: st: enable Ethernet2 on stm32mp257f-ev1 board arm64: dts: st: add eth2 pinctrl entries in stm32mp25-pinctrl.dtsi arm64: dts: st: add ethernet1 and ethernet2 support on stm32mp25 arm64: dts: st: add HPDMA nodes on stm32mp251 ARM: dts: stm32: Add ethernet support for DH STM32MP13xx DHCOR DHSBC board ARM: dts: stm32: order stm32mp13-pinctrl nodes ARM: dts: stm32: add ethernet1 for STM32MP135F-DK board ARM: dts: stm32: add ethernet1/2 RMII pins for STM32MP13F-DK board ARM: dts: stm32: add ethernet1 and ethernet2 support on stm32mp13 ARM: dts: stm32: Document output pins for PWMs on stm32mp135f-dk ARM: dts: stm32: OP-TEE async notif interrupt for ST STM32MP15x boards ARM: dts: stm32: Missing clocks for stm32f429's syscfg. ARM: dts: stm32: Add support for STM32MP13xx DHCOR SoM and DHSBC board ARM: dts: stm32: Add pinmux nodes for DH electronics STM32MP13xx DHCOR SoM and DHSBC board dt-bindings: arm: stm32: Add compatible string for DH electronics STM32MP13xx DHCOR DHSBC board ARM: dts: stm32: osd32: move pwr_regulators to common ... Link: https://lore.kernel.org/r/8f10bd29-d067-4060-89ff-2e1a605f3141@foss.st.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-07-08Merge tag 'qcom-arm32-for-6.11' of ↵Arnd Bergmann20-29/+1967
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt Qualcomm Arm32 DeviceTree updates for v6.11 This introduces new support for the Sony Xperia Z3 Compact, HTC One (M8), Samsung Galaxy Tab 4 8.0 Wi-Fi, Samsung Galaxy Grand 2, and Samsung Galaxy Note 3 devices. The Motorola Moto G and Motorola Moto G 4G gains accelerometer and magnetometer support, with the latter also getting framebuffer supplies and a temperature sensor wired up. The SMBB (charger block) is enabled across all MSM8x26 Lumia devices, as this is used for USB state changes. The operating mode for SDC regulator is set to HPM on Sony Xperia "Shinano" family to avoid brownouts on uSD-cards. The panel on LGE Nexus 5 is connected to the backlight, to make this turn off on blanking. MSM8974 is transitioned to use the mailbox-abstraction for invoking PC interrupts on remote processors. * tag 'qcom-arm32-for-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (24 commits) ARM: dts: qcom: qcom-msm8226-samsung-ms013g: Add initial device tree ARM: dts: qcom: apq8064: drop incorrect ranges from QFPROM ARM: dts: qcom: msm8926-motorola-peregrine: Add framebuffer supplies ARM: dts: qcom: msm8926-motorola-peregrine: Update temperature sensor ARM: dts: qcom: msm8926-motorola-peregrine: Add accelerometer, magnetometer, regulator ARM: dts: qcom: msm8974: Use mboxes in smsm node ARM: dts: qcom: msm8974-sony-shinano: increase load on l21 for sdhc2 ARM: dts: qcom: Add Sony Xperia Z3 Compact smartphone ARM: dts: qcom: use generic node names for Adreno and QFPROM ARM: dts: qcom: motorola-falcon: add accelerometer, magnetometer ARM: dts: qcom: Add initial support for HTC One (M8) ARM: dts: qcom: msm8974: Use mboxes properties for APCS ARM: dts: qcom: mdm9615: drop #power-domain-cells property of GCC ARM: dts: qcom: ipq8064: drop #power-domain-cells property of GCC ARM: dts: qcom: ipq4019: drop #power-domain-cells property of GCC ARM: dts: qcom: msm8960: drop #power-domain-cells property of GCC ARM: dts: qcom: msm8660: drop #power-domain-cells property of GCC ARM: dts: qcom: apq8064: drop #power-domain-cells property of GCC ARM: dts: qcom: msm8974: Use proper compatible for APCS syscon ARM: dts: qcom: msm8974-hammerhead: Update gpio hog node name ... Link: https://lore.kernel.org/r/20240705032926.13333-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-07-08ARM: dts: ixp4xx: nslu2: beeper uses PWMLinus Walleij1-2/+9
The beeper in the NSLU2 is just a GPIO connected to a speaker, so we need to use PWM on the GPIO to get any kind of sound out. Tested with some random beeps by enabling INPUT_EVDEV and running beep.c with e.g. beep 400 for a 400 Hz tone. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/20240627-ixp4xx-dts-v1-1-cdbbe1150873@linaro.org Link: https://lore.kernel.org/r/20240703-ixp4xx-dts-v1-1-e5149da36f6e@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-07-08Merge tag 'sunxi-dt-for-6.11' of ↵Arnd Bergmann1-62/+0
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt Allwinner SoC device tree changes for 6.11 This includes a commit shared with the clk tree. This commit adds clock and reset indices to the device tree binding, and thus is needed for both the device tree and driver changes. ARM64 device tree and binding-only changes - Add LRADC (low resolution ADC for resistor network based keys) for H616 SoC - Add cache information for A64, H6, and H616 SoCs - Correct model names and descriptions for Pine64 boards - Add GPADC (general purpose ADC) for H616 SoC - Add ADC joysticks based on GPADC for anbernic-rg35xx-h board - Add additional CPU OPPs for the H700 on top of existing H616 ones - Enable DVFS for rg35xx boards - Add IOMMU for H616 SoC RISC-V device tree changes - Add system LDOs to D1s/T113 SoC - Add ClockworkPi and DevTerm device trees * tag 'sunxi-dt-for-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: riscv: dts: allwinner: Add ClockworkPi and DevTerm devicetrees riscv: dts: allwinner: d1s-t113: Add system LDOs arm64: dts: allwinner: h616: add IOMMU node arm64: dts: allwinner: rg35xx: Enable DVFS CPU frequency scaling arm64: dts: allwinner: h616: add additional CPU OPPs for the H700 arm64: dts: allwinner: anbernic-rg35xx-h: Add ADC joysticks arm64: dts: allwinner: h616: Add GPADC device node dt-bindings: clock: sun50i-h616-ccu: Add GPADC clocks ARM: dts: sunxi: remove duplicated entries in makefile arm64: dts: allwinner: Add cache information to the SoC dtsi for H616 arm64: dts: allwinner: Add cache information to the SoC dtsi for A64 arm64: dts: allwinner: Correct the model names for Pine64 boards dt-bindings: arm: sunxi: Correct the descriptions for Pine64 boards arm64: dts: allwinner: Add cache information to the SoC dtsi for H6 ARM: dts: sun50i: Add LRADC node dt-bindings: input: sun4i-lradc-keys: Add H616 compatible Link: https://lore.kernel.org/r/ZoQa8r1N8yi7FlPV@wens.tw Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-07-08Merge tag 'imx-dt-6.11' of ↵Arnd Bergmann31-123/+287
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt i.MX ARM device tree change for 6.11: - A few changes from Krzysztof Kozlowski to fix dtschema issues - A series from Michael Walle to improve kontron-samx6i SoM support by fixing various errors and add kontron-samx6i-ads2 board - Add LVDS port data mapping for M53 Menlo board - Convert NVMEM usage to layout syntax on MBA6 boards * tag 'imx-dt-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx6qdl-kontron-samx6i: add actual device trees ARM: dts: imx6qdl-kontron-samx6i: remove wake-up-gpio property ARM: dts: imx6qdl-kontron-samx6i: fix PCIe reset polarity ARM: dts: imx6qdl-kontron-samx6i: fix node names ARM: dts: imx6qdl-kontron-samx6i: add SDIO_PWR_EN support ARM: dts: imx6qdl-kontron-samx6i: always enable eMMC ARM: dts: imx6qdl-kontron-samx6i: fix product name ARM: dts: imx6qdl-kontron-samx6i: fix SPI0 chip selects ARM: dts: imx6qdl-kontron-samx6i: cleanup the PMIC node ARM: dts: imx6qdl-kontron-samx6i: fix board reset ARM: dts: imx6qdl-kontron-samx6i: fix PHY reset ARM: dts: imx6qdl-kontron-samx6i: fix phy-mode ARM: dts: nxp: imx6: convert NVMEM content to layout syntax ARM: dts: e60k02: fix aliases for mmc ARM: dts: imx: Add LVDS port data mapping on M53 Menlo ARM: dts: imx28-tx28: drop redundant 'panel-name' property ARM: dts: imx: drop redundant 'u-boot,panel-name' property ARM: dts: imx6dl-aristainetos2_4: drop redundant 'power-on-delay' property ARM: dts: imx: correct choice of panel native mode ARM: dts: imx: align panel timings node name with dtschema Link: https://lore.kernel.org/r/20240702142153.413061-3-shawnguo2@yeah.net Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-07-08Merge tag 'dt-cleanup-6.11' of ↵Arnd Bergmann23-86/+88
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into soc/dt Minor improvements in ARM DTS for v6.11 Few cleanups and improvements which were missed by their maintainers: 1. Add Krzysztof as odd-fixer for old ARM platforms: Alphascale, AXM LSI, Moxa, TI Nspire and VT8500 (with Alexey Charkov). 2. VT8500: align node names with bindings (USB, panel timings). 3. Cirrus: align node names with bindings (panel timings). 4. TI Nspire: correct unit addresses, correct watchdog compatible and properties while making it disabled (never tested). 5. Nuvoton, Aspeed: align node names with bindings (I2C). IMPORTANT: At least for Aspeed it is known to affect some user-space tools, because that user-space looks for specific node path via /sys/firmware/devicetree. The /sys/firmware/devicetree is not the ABI and any user-space relying on it: - Prevents any changes in DTS, e.g. node renaming or moving, changing unit addresses (re-arranging child bus addressing). - Is using undocumented interface. - Is neither reliable nor understandable. 6. TI OMAP and Davinci: align node names with bindings (panel timings), drop incorrect property. 7. STI: document in bindings codec child to fix dtbs_checks. * tag 'dt-cleanup-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt: ARM: dts: omap am5729-beagleboneai: drop unneeded ti,enable-id-detection dt-bindings: soc: sti: st,sti-syscon: document codec node ARM: dts: ti: align panel timings node name with dtschema arm: dts: aspeed: Use standard 'i2c' bus node name arm: dts: nuvoton: Use standard 'i2c' bus node name MAINTAINERS: ARM: alphascale: add Krzysztof Kozlowski as maintainer ARM: dts: nspire: Add full compatible for watchdog node ARM: dts: nspire: Add unit name addresses to memory nodes MAINTAINERS: ARM: nspire: add Krzysztof Kozlowski as maintainer MAINTAINERS: ARM: vt8500: add Alexey and Krzysztof as maintainers MAINTAINERS: ARM: axm: add Krzysztof Kozlowski as maintainer MAINTAINERS: ARM: moxa: add Krzysztof Kozlowski as maintainer ARM: dts: cirrus: align panel timings node name with dtschema ARM: dts: vt8500: align panel timings node name with dtschema ARM: dts: vt8500: replace "uhci" nodename with generic name "usb" Link: https://lore.kernel.org/r/20240702065359.7378-2-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-07-06ARM: dts: qcom: msm8960: correct memory baseDavid Heidelberg1-2/+2
DeviceTree validation requires a unit address on the memory node, adjust the base to match [Ref] and use this as unit address. The bootloader will update the information with the actual values during boot. Ref: https://github.com/msm8916-mainline/lk2nd/blob/main/target/msm8960/rules.mk Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: David Heidelberg <david@ixit.cz> Link: https://lore.kernel.org/r/20240706220041.241839-1-david@ixit.cz Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-07-05ARM: dts: turris-omnia: Add GPIO key node for front buttonMarek Behún1-0/+13
Now that we have the MCU device-tree node, which acts as a GPIO controller, add GPIO key node for the front button. Signed-off-by: Marek Behún <kabel@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2024-07-05ARM: dts: turris-omnia: Add MCU system-controller nodeMarek Behún1-1/+21
Turris Omnia's MCU provides various features that can be configured over I2C at address 0x2a. Add device-tree node. This does not carry a Fixes tag - we do not want this to get backported to stable kernels for the following reason: U-Boot since v2022.10 inserts a phy-reset-gpio property into the WAN ethernet node pointing to the MCU node if it finds the MCU node with a cznic,turris-omnia-mcu compatible. Thus if this change got backported to a stable kernel, the WAN interface driver would defer probe indefinitely (since it would wait for the turris-omnia-mcu driver which would not be present). Signed-off-by: Marek Behún <kabel@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2024-07-05ARM: dts: stm32: omit unused pinctrl groups from stm32mp13 dtb filesAlexandre Torgue1-2/+90
stm32mp13-pinctrl.dtsi contains nearly all pinctrl groups collected from all boards. Most of them end up unused by a board and only waste binary space. Add /omit-if-no-ref/ to the groups to scrub the unused groups from the dtbs. Use the following regex to update the file and drop two useless newlines too: s@^\t[^:]\+: [^ ]\+ {$@\t/omit-if-no-ref/\r&@ Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-07-05ARM: dts: stm32: Add ethernet support for DH STM32MP13xx DHCOR DHSBC boardMarek Vasut1-0/+56
Add ethernet support for the DH STM32MP13xx DHCOR DHSBC carrier board. This carrier board is populated with two gigabit ethernet ports and two Realtek RTL8211F PHYs, both are described in this DT patch. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-07-05ARM: dts: stm32: order stm32mp13-pinctrl nodesAlexandre Torgue1-65/+65
Keep alphabetic order for pins definition nodes for a better read. Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-07-05ARM: dts: stm32: add ethernet1 for STM32MP135F-DK boardChristophe Roullier1-0/+23
Ethernet1: RMII with crystal Ethernet2: RMII with no cristal, need "phy-supply" property to work, today this property was managed by Ethernet glue, but should be present and managed in PHY node. So I will push second Ethernet in next step. PHYs used are SMSC (LAN8742A) Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-07-05