summaryrefslogtreecommitdiff
path: root/arch/arm/mach-pxa
AgeCommit message (Collapse)AuthorFilesLines
2015-10-16ARM: pxa: raumfeld: make some variables staticUwe Kleine-König1-5/+5
This fixes the following sparse warnings: arch/arm/mach-pxa/raumfeld.c:510:24: warning: symbol 'raumfeld_w1_gpio_device' was not declared. Should it be static? arch/arm/mach-pxa/raumfeld.c:632:31: warning: symbol 'raumfeld_spi_platform_data' was not declared. Should it be static? arch/arm/mach-pxa/raumfeld.c:851:28: warning: symbol 'audio_va_initdata' was not declared. Should it be static? arch/arm/mach-pxa/raumfeld.c:883:28: warning: symbol 'audio_dummy_initdata' was not declared. Should it be static? arch/arm/mach-pxa/raumfeld.c:931:28: warning: symbol 'max8660_v6_subdev_data' was not declared. Should it be static? Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-10-14ARM: pxa: magician: Remove pdata for pasic3-ledsPetr Cvek1-42/+1
The pasic3-leds driver was never in vanilla kernel. Actual configuration data for a hypothetical driver does not describe hardware completely, so remove them. This patch prepare HTC Magician machine code to pasic3-leds driver addition. Signed-off-by: Petr Cvek <petr.cvek@tul.cz> Acked-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-10-14ARM: pxa: magician: Add support for PXA27x UDCPetr Cvek1-0/+22
A PXA27x SoC supports USB device mode, this patch adds support for that. Signed-off-by: Petr Cvek <petr.cvek@tul.cz> Acked-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-10-14ARM: pxa: magician: Add support for MAX1587A Vcore regulatorPetr Cvek1-0/+52
HTC Magician contains a MAX1587A voltage regulator for a Vcore supply. The Vcore regulation is required for a CPU speed switching. This patch adds declaration for the max1586 driver. Notice: - MAX1587A version does not support the V6 (USIM) output. - A boost resistor was directly measured for a board_id 0x3a. Signed-off-by: Petr Cvek <petr.cvek@tul.cz> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-10-14ARM: pxa: magician: Change comments to be more informativePetr Cvek1-13/+29
This patch changes the comments in the HTC Magician machine source code to better describe used devices and interfaces. Signed-off-by: Petr Cvek <petr.cvek@tul.cz> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-10-14ARM: pxa: magician: Move platform_add_devices() to the end of magician_init()Petr Cvek1-1/+2
This patch moves platform_add_devices() (standard declaration of devices) outside of the platform specific device declarations. Moving to the end of the magician_init() clarifies the source code (standard and specific declaration are not mixed). Signed-off-by: Petr Cvek <petr.cvek@tul.cz> Acked-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-10-14ARM: pxa: magician: Add missing regulator for PWM backlightPetr Cvek1-0/+13
Add a fake regulator, which is required for the correct initialization of the PWM backlight driver. Signed-off-by: Petr Cvek <petr.cvek@tul.cz> Acked-by: Philipp Zabel <philipp.zabel@gmail.com> [ added a missing include for fixed regulator ] Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-10-14ARM: pxa: magician: Add debug message for backlight brightness functionPetr Cvek1-0/+1
Add a debug message for the backlight brightness function. Signed-off-by: Petr Cvek <petr.cvek@tul.cz> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-10-14ARM: pxa: magician: Remove definition of the STUART portPetr Cvek1-1/+0
Magician STUART port is connected to the infraport and used by the FICP driver. The FICP driver uses its own definition. Required for correct initialization of the pxaficp_ir driver after planned dmaengine conversion. Signed-off-by: Petr Cvek <petr.cvek@tul.cz> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-10-14ARM: pxa: magician: Fix wrongly enabled USB host portsPetr Cvek1-1/+3
USB host ports on the HTC Magician are wrongly enabled. Port 1 is for bluetooth and port 2 is for OTG (mux in the charger connector). Signed-off-by: Petr Cvek <petr.cvek@tul.cz> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-10-14ARM: pxa: magician: Fix support for Intel Strata NOR FlashPetr Cvek1-0/+45
Old definition for the physmap-flash driver is incomplete: - Use of an EGPIO without previous request - Missing the MTD partitions This patch fixes it. Read functionality was tested on the machine with board_id 0x3a. Writing was not tested. Signed-off-by: Petr Cvek <petr.cvek@tul.cz> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-10-14ARM: pxa: magician: Fix redundant GPIO request for pxaficp_irPetr Cvek1-1/+1
The pxaficp_ir driver requests a power GPIO for the transceiver internally, so a global GPIO allocation in magician_init() is redundant. Signed-off-by: Petr Cvek <petr.cvek@tul.cz> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-10-14ARM: pxa: magician: Fix platform data for both PXA27x I2C controllersPetr Cvek1-2/+11
This patch changes fast_mode settings for the normal and power I2C controller on the HTC Magician machine. Connected device on the Power I2C: - MAX1587A: working in the fast mode Connected devices on the Normal I2C: - UDA1380: working in the fast mode - OV9640: bus became stuck in the fast mode The OV9640 is not using a standard I2C protocol, but an SCCB variant. Maybe it is not fully compatible in the fast mode. Therefore fast mode for normal I2C is disabled. If you not using the OV9640 then you can enable the fast mode for the UDA1380. Signed-off-by: Petr Cvek <petr.cvek@tul.cz> [included Philipp Zabel's comment change] Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-10-14ARM: pxa: magician: Fix and add charging detection functionsPetr Cvek1-7/+50
This patch fixes the charging detection functions for pda_power driver (according to newly discovered EGPIOs) and add NiCd backup accumulator charging support. Signed-off-by: Petr Cvek <petr.cvek@tul.cz> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-10-14ARM: pxa: magician: Optimize Samsung LCD refresh to 50HzPetr Cvek1-1/+1
Change the default Samsung LCD refresh from an unrealistic 117Hz to 50Hz as no video applications on the HTC Magician can work that fast. The optimalization lowers the RAM latency at least by 3%. Signed-off-by: Petr Cvek <petr.cvek@tul.cz> Acked-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-10-14ARM: pxa: magician: Rename charger cable detection EGPIOsPetr Cvek2-7/+12
This patch renames EGPIOs, which are used for the charging cable presence and type detection. Old names did not correspond with an observed functionality (on board_id 0x3a). The behavior is not: - AC charger - USB charger - Cable detection , but: - AC/USB type - Cable detection1 - Cable detection2 This patch fixes a possible typo in the bit offset for the cable detection EGPIO declaration, too. Signed-off-by: Petr Cvek <petr.cvek@tul.cz> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-10-14ARM: pxa: magician: Optimize powerup delays for Samsung LCDPetr Cvek1-8/+6
Delays for the Samsung LCD are greater than needed. These values were extracted from a datasheet. Signed-off-by: Petr Cvek <petr.cvek@tul.cz> Acked-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-10-14ARM: pxa: magician: Rename abstract LCD GPIOsPetr Cvek2-18/+21
This patch renames GPIOs, which are used to control the power lines to the LCD screen. New names correspond to a real functionality, which was measured on the HTC Magician board_id 0x3a. Signed-off-by: Petr Cvek <petr.cvek@tul.cz> Acked-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-10-14ARM: pxa: magician: Add new discovered EGPIO pinsPetr Cvek1-1/+4
This patch adds EGPIO pins: Infra transceiver power, NiCD charging and inserted charger cable. Signed-off-by: Petr Cvek <petr.cvek@tul.cz> Acked-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-10-14ARM: pxa: magician: Change description of LCD power GPIOPetr Cvek1-1/+1
This patch changes the description of the LCD power GPIO to be more specific. Signed-off-by: Petr Cvek <petr.cvek@tul.cz> Acked-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-10-14ARM: pxa: magician: Optimize debug messages for LCD powerPetr Cvek1-6/+2
Optimize the debug messages for the LCD power. Signed-off-by: Petr Cvek <petr.cvek@tul.cz> Acked-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-10-14ARM: pxa: magician: Print more specific error message for global GPIOsPetr Cvek1-1/+1
Print more specific error message for global GPIOs. Signed-off-by: Petr Cvek <petr.cvek@tul.cz> Acked-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-10-14ARM: pxa: magician: Fix indentation in machine filesPetr Cvek2-209/+209
This patch fixes the indentation for the HTC Magician machine definition. Signed-off-by: Petr Cvek <petr.cvek@tul.cz> Acked-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-10-14ARM: pxa: zylonite: Use PWM lookup tableThierry Reding1-2/+7
Use a PWM lookup table to provide the PWM to the pwm-backlight device. The driver has a legacy code path that is required only because boards still use the legacy method of requesting PWMs by global ID. Replacing these usages allows that legacy fallback to be removed. Cc: Daniel Mack <daniel@zonque.org> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-10-14ARM: pxa: z2: Use PWM lookup tableThierry Reding1-4/+9
Use a PWM lookup table to provide the PWM to the pwm-backlight device. The driver has a legacy code path that is required only because boards still use the legacy method of requesting PWMs by global ID. Replacing these usages allows that legacy fallback to be removed. Cc: Daniel Mack <daniel@zonque.org> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-10-14ARM: pxa: tavorevb: Use PWM lookup tableThierry Reding1-4/+9
Use a PWM lookup table to provide the PWM to the pwm-backlight device. The driver has a legacy code path that is required only because boards still use the legacy method of requesting PWMs by global ID. Replacing these usages allows that legacy fallback to be removed. Cc: Daniel Mack <daniel@zonque.org> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-10-14ARM: pxa: cm-x300: Use PWM lookup tableThierry Reding1-2/+7
Use a PWM lookup table to provide the PWM to the pwm-backlight device. The driver has a legacy code path that is required only because boards still use the legacy method of requesting PWMs by global ID. Replacing these usages allows that legacy fallback to be removed. Cc: Daniel Mack <daniel@zonque.org> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-10-14ARM: pxa: palmtc: Use PWM lookup tableThierry Reding1-2/+7
Use a PWM lookup table to provide the PWM to the pwm-backlight device. The driver has a legacy code path that is required only because boards still use the legacy method of requesting PWMs by global ID. Replacing these usages allows that legacy fallback to be removed. Cc: Daniel Mack <daniel@zonque.org> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-10-14ARM: pxa: viper: Use PWM lookup tableThierry Reding1-2/+7
Use a PWM lookup table to provide the PWM to the pwm-backlight device. The driver has a legacy code path that is required only because boards still use the legacy method of requesting PWMs by global ID. Replacing these usages allows that legacy fallback to be removed. Cc: Daniel Mack <daniel@zonque.org> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-10-14ARM: pxa: raumfeld: Use PWM lookup tableThierry Reding1-3/+8
Use a PWM lookup table to provide the PWM to the pwm-backlight device. The driver has a legacy code path that is required only because boards still use the legacy method of requesting PWMs by global ID. Replacing these usages allows that legacy fallback to be removed. Cc: Daniel Mack <daniel@zonque.org> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-10-14ARM: pxa: pcm990: Use PWM lookup tableThierry Reding1-2/+7
Use a PWM lookup table to provide the PWM to the pwm-backlight device. The driver has a legacy code path that is required only because boards still use the legacy method of requesting PWMs by global ID. Replacing these usages allows that legacy fallback to be removed. Cc: Daniel Mack <daniel@zonque.org> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-10-14ARM: pxa: palmte2: Use PWM lookup tableThierry Reding1-2/+7
Use a PWM lookup table to provide the PWM to the pwm-backlight device. The driver has a legacy code path that is required only because boards still use the legacy method of requesting PWMs by global ID. Replacing these usages allows that legacy fallback to be removed. Cc: Daniel Mack <daniel@zonque.org> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-10-14ARM: pxa: palm27x: Use PWM lookup tableThierry Reding1-2/+7
Use a PWM lookup table to provide the PWM to the pwm-backlight device. The driver has a legacy code path that is required only because boards still use the legacy method of requesting PWMs by global ID. Replacing these usages allows that legacy fallback to be removed. Cc: Daniel Mack <daniel@zonque.org> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-10-14ARM: pxa: mioa701: Use PWM lookup tableThierry Reding1-2/+7
Use a PWM lookup table to provide the PWM to the pwm-backlight device. The driver has a legacy code path that is required only because boards still use the legacy method of requesting PWMs by global ID. Replacing these usages allows that legacy fallback to be removed. Cc: Daniel Mack <daniel@zonque.org> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-10-14ARM: pxa: mainstone: Use PWM lookup tableThierry Reding1-4/+15
Use a PWM lookup table to provide the PWM to the pwm-backlight device. The driver has a legacy code path that is required only because boards still use the legacy method of requesting PWMs by global ID. Replacing these usages allows that legacy fallback to be removed. Cc: Daniel Mack <daniel@zonque.org> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> [ split pwm_remove_table() call on 2 lines ] Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-10-14ARM: pxa: fix pxa3xx DFI lockup hackArnd Bergmann1-4/+5
Some recently added code to avoid a bug introduced a build error when CONFIG_PM is disabled and a macro is hidden: arch/arm/mach-pxa/pxa3xx.c: In function 'pxa3xx_init': arch/arm/mach-pxa/pxa3xx.c:439:3: error: 'NDCR' undeclared (first use in this function) NDCR = (NDCR & ~NDCR_ND_ARB_EN) | NDCR_ND_ARB_CNTL; ^ This moves the macro outside of the #ifdef so it can be referenced correctly. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: adf3442cc890 ("ARM: pxa: fix DFI bus lockups on startup") Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-10-06ARM: pxa: magician: Use PWM lookup tableThierry Reding1-2/+7
Use a PWM lookup table to provide the PWM to the pwm-backlight device. The driver has a legacy code path that is required only because boards still use the legacy method of requesting PWMs by global ID. Replacing these usages allows that legacy fallback to be removed. Cc: Daniel Mack <daniel@zonque.org> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Acked-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-10-06ARM: pxa: lpd270: Use PWM lookup tableThierry Reding1-2/+7
Use a PWM lookup table to provide the PWM to the pwm-backlight device. The driver has a legacy code path that is required only because boards still use the legacy method of requesting PWMs by global ID. Replacing these usages allows that legacy fallback to be removed. Cc: Daniel Mack <daniel@zonque.org> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-10-06ARM: pxa: hx4700: Remove unused field initializersThierry Reding1-2/+0
The ID and period for the backlight PWM are obtained from a PWM lookup table, so the corresponding values don't need to be duplicated into the platform data. Cc: Daniel Mack <daniel@zonque.org> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Acked-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-10-05ARM: pxa: ezx: Use PWM lookup tableThierry Reding1-2/+7
Use a PWM lookup table to provide the PWM to the pwm-backlight device. The driver has a legacy code path that is required only because boards still use the legacy method of requesting PWMs by global ID. Replacing these usages allows that legacy fallback to be removed. Cc: Daniel Mack <daniel@zonque.org> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-10-05ARM: pxa: colibri-pxa270-income: Use PWM lookup tableThierry Reding1-2/+7
Use a PWM lookup table to provide the PWM to the pwm-backlight device. The driver has a legacy code path that is required only because boards still use the legacy method of requesting PWMs by global ID. Replacing these usages allows that legacy fallback to be removed. Cc: Daniel Mack <daniel@zonque.org> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-09-27Merge tag 'armsoc-fixes' of ↵Linus Torvalds3-2/+28
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "Our first real batch of fixes this release cycle. Nothing really concerning, and diffstat is a bit inflated due to some DT contents moving around on STi platforms. There's a collection of them here: - A fixup for a build breakage that hits on arm64 allmodconfig in QCOM SCM firmware drivers - MMC fixes for OMAP that had quite a bit of breakage this merge window. - Misc build/warning fixes on PXA and OMAP - A couple of minor fixes for Beagleboard X15 which is now starting to see a few more users in the wild" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (31 commits) ARM: sti: dt: adapt DT to fix probe/bind issues in DRM driver ARM: dts: fix omap2+ address translation for pbias firmware: qcom: scm: Add function stubs for ARM64 ARM: dts: am57xx-beagle-x15: use palmas-usb for USB2 ARM: omap2plus_defconfig: enable GPIO_PCA953X ARM: dts: omap5-uevm.dts: fix i2c5 pinctrl offsets ARM: OMAP2+: AM43XX: Enable autoidle for clks in am43xx_init_late ARM: dts: am57xx-beagle-x15: Update Phy supplies ARM: pxa: balloon3: Fix build error ARM: dts: Fixup model name for HP t410 dts ARM: dts: DRA7: fix a typo in ethernet ARM: omap2plus_defconfig: make PCF857x built-in ARM: dts: Use ti,pbias compatible string for pbias ARM: OMAP5: Cleanup options for SoC only build ARM: DRA7: Select missing options for SoC only build ARM: OMAP2+: board-generic: Remove stale of_irq macros ARM: OMAP4+: PM: erratum is used by OMAP5 and DRA7 as well ARM: dts: omap3-igep: Move eth IRQ pinmux to IGEPv2 common dtsi ARM: dts: am57xx-beagle-x15: Add wakeup irq for mcp79410 ARM: dts: am335x-phycore-som: Fix mpu voltage ...
2015-09-26ARM: pxa: mioa701: add wm9713 codecRobert Jarzmik1-0/+2
The mioa701 is using the wm9713 for audio, battery and touchscreen. Add the missing audio part, which disappeared. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-09-26ARM: pxa: add resources to pxaficp_irRobert Jarzmik1-0/+20
Add io memory and dma requestor lines to the irda pxa device. This is part of the conversion of pxaficp_ir to dmaengine, and to shrink its adherence to 'mach' includes. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Tested-by: Petr Cvek <petr.cvek@tul.cz>
2015-09-20ARM: pxa: Remove unused clock_enable field from struct pxa2xx_spi_masterJarkko Nikula3-5/+0
Use for struct pxa2xx_spi_master clock_enable field was removed years ago from the pxa2xx-spi driver by the commit 2f1a74e5a2de ("[ARM] pxa: make pxa2xx_spi driver use ssp_request()/ssp_free()"). Therefore remove it from structure definition, documentation and from couple affected board files. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-09-16ARM: pxa: balloon3: Fix build errorAxel Lin1-1/+1
irq_data_get_chip() function does not exist, call irq_desc_get_chip() instead. Fixes: 9ec97561aa6d ("ARM/pxa: Prepare balloon3_irq_handler for irq argument removal") Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-09-16genirq: Remove irq argument from irq flow handlersThomas Gleixner6-8/+7
Most interrupt flow handlers do not use the irq argument. Those few which use it can retrieve the irq number from the irq descriptor. Remove the argument. Search and replace was done with coccinelle and some extra helper scripts around it. Thanks to Julia for her help! Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Jiang Liu <jiang.liu@linux.intel.com>
2015-09-13ARM: pxa: fix DFI bus lockups on startupRobert Jarzmik2-1/+27
After the conversion of pxa architecture to common clock framework, the NAND clock can be disabled on startup if no nand driver claims it. In this case, it happens that if the bootloader used the NAND and set the DFI arbitration bit, the next access to a static memory controller area, such as an ethernet card, the system bus will stall, and the core will be stalled forever. Fix this by clearing the DFI arbritration bit in pxa3xx startup. The bit will be enabled the pxa3xx-nand driver on need anyway. The only left requirement is that upon pxa3xx-nand removal, the bit should be cleared before the clock is disabled. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-09-05ARM: pxa: add memory resource to SA1100 RTC deviceRob Herring1-16/+2
The drivers for the SA1100 and PXA RTCs are now mutually exclusive, so add the memory resource for the sa1100-rtc device. Since the memory resource is already present in the pxa_rtc_resources, that makes sa1100_rtc_resources and pxa_rtc_resources equivalent, so use pxa_rtc_resources for both devices and remove the duplicate sa1100_rtc_resources. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Daniel Mack <daniel@zonque.org> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Russell King <linux@arm.linux.org.uk> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-09-05rtc: pxa: convert to use shared sa1100 functionsRob Herring2-2/+0
Currently, the rtc-sa1100 and rtc-pxa drivers co-exist as rtc-pxa has a superset of functionality. Having 2 drivers sharing the same memory resource is not allowed by the driver model if resources are properly declared. This problem was avoided by not adding memory resources to the SA1100 RTC driver, but that prevents clean-up of the SA1100 driver. This commit converts the PXA RTC to use the exported SA1100 RTC functions. Now the sa1100-rtc and pxa-rtc devices are mutually exclusive, so we must remove the sa1100-rtc from pxa27x and pxa3xx. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Daniel Mack <daniel@zonque.org> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Russell King <linux@arm.linux.org.uk> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: linux-arm-kernel@lists.infradead.org Cc: rtc-linux@googlegroups.com Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-08-19 12:57:04 +0000