| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
commit a1d402abf8e3ff1d821e88993fc5331784fac0da upstream.
Oliver reports that the kvm_has_feat() helper is not behaviing as
expected for negative feature. On investigation, the main issue
seems to be caused by the following construct:
#define get_idreg_field(kvm, id, fld) \
(id##_##fld##_SIGNED ? \
get_idreg_field_signed(kvm, id, fld) : \
get_idreg_field_unsigned(kvm, id, fld))
where one side of the expression evaluates as something signed,
and the other as something unsigned. In retrospect, this is totally
braindead, as the compiler converts this into an unsigned expression.
When compared to something that is 0, the test is simply elided.
Epic fail. Similar issue exists in the expand_field_sign() macro.
The correct way to handle this is to chose between signed and unsigned
comparisons, so that both sides of the ternary expression are of the
same type (bool).
In order to keep the code readable (sort of), we introduce new
comparison primitives taking an operator as a parameter, and
rewrite the kvm_has_feat*() helpers in terms of these primitives.
Fixes: c62d7a23b947 ("KVM: arm64: Add feature checking helpers")
Reported-by: Oliver Upton <oliver.upton@linux.dev>
Tested-by: Oliver Upton <oliver.upton@linux.dev>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20241002204239.2051637-1-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
KVM generic changes for 6.11
- Enable halt poll shrinking by default, as Intel found it to be a clear win.
- Setup empty IRQ routing when creating a VM to avoid having to synchronize
SRCU when creating a split IRQCHIP on x86.
- Rework the sched_in/out() paths to replace kvm_arch_sched_in() with a flag
that arch code can use for hooking both sched_in() and sched_out().
- Take the vCPU @id as an "unsigned long" instead of "u32" to avoid
truncating a bogus value from userspace, e.g. to help userspace detect bugs.
- Mark a vCPU as preempted if and only if it's scheduled out while in the
KVM_RUN loop, e.g. to avoid marking it preempted and thus writing guest
memory when retrieving guest state during live migration blackout.
- A few minor cleanups
|
|
* kvm-arm64/nv-sve:
: CPTR_EL2, FPSIMD/SVE support for nested
:
: This series brings support for honoring the guest hypervisor's CPTR_EL2
: trap configuration when running a nested guest, along with support for
: FPSIMD/SVE usage at L1 and L2.
KVM: arm64: Allow the use of SVE+NV
KVM: arm64: nv: Add additional trap setup for CPTR_EL2
KVM: arm64: nv: Add trap description for CPTR_EL2
KVM: arm64: nv: Add TCPAC/TTA to CPTR->CPACR conversion helper
KVM: arm64: nv: Honor guest hypervisor's FP/SVE traps in CPTR_EL2
KVM: arm64: nv: Load guest FP state for ZCR_EL2 trap
KVM: arm64: nv: Handle CPACR_EL1 traps
KVM: arm64: Spin off helper for programming CPTR traps
KVM: arm64: nv: Ensure correct VL is loaded before saving SVE state
KVM: arm64: nv: Use guest hypervisor's max VL when running nested guest
KVM: arm64: nv: Save guest's ZCR_EL2 when in hyp context
KVM: arm64: nv: Load guest hyp's ZCR into EL1 state
KVM: arm64: nv: Handle ZCR_EL2 traps
KVM: arm64: nv: Forward SVE traps to guest hypervisor
KVM: arm64: nv: Forward FP/ASIMD traps to guest hypervisor
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
* kvm-arm64/ctr-el0:
: Support for user changes to CTR_EL0, courtesy of Sebastian Ott
:
: Allow userspace to change the guest-visible value of CTR_EL0 for a VM,
: so long as the requested value represents a subset of features supported
: by hardware. In other words, prevent the VMM from over-promising the
: capabilities of hardware.
:
: Make this happen by fitting CTR_EL0 into the existing infrastructure for
: feature ID registers.
KVM: selftests: Assert that MPIDR_EL1 is unchanged across vCPU reset
KVM: arm64: nv: Unfudge ID_AA64PFR0_EL1 masking
KVM: selftests: arm64: Test writes to CTR_EL0
KVM: arm64: rename functions for invariant sys regs
KVM: arm64: show writable masks for feature registers
KVM: arm64: Treat CTR_EL0 as a VM feature ID register
KVM: arm64: unify code to prepare traps
KVM: arm64: nv: Use accessors for modifying ID registers
KVM: arm64: Add helper for writing ID regs
KVM: arm64: Use read-only helper for reading VM ID registers
KVM: arm64: Make idregs debugfs iterator search sysreg table directly
KVM: arm64: Get sys_reg encoding from descriptor in idregs_debug_show()
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Load the guest hypervisor's ZCR_EL2 into the corresponding EL1 register
when restoring SVE state, as ZCR_EL2 affects the VL in the hypervisor
context.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240620164653.1130714-5-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Unlike other SVE-related registers, ZCR_EL2 takes a sysreg trap to EL2
when HCR_EL2.NV = 1. KVM still needs to honor the guest hypervisor's
trap configuration, which expects an SVE trap (i.e. ESR_EL2.EC = 0x19)
when CPTR traps are enabled for the vCPU's current context.
Otherwise, if the guest hypervisor has traps disabled, emulate the
access by mapping the requested VL into ZCR_EL1.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240620164653.1130714-4-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
CTR_EL0 is currently handled as an invariant register, thus
guests will be presented with the host value of that register.
Add emulation for CTR_EL0 based on a per VM value. Userspace can
switch off DIC and IDC bits and reduce DminLine and IminLine sizes.
Naturally, ensure CTR_EL0 is trapped (HCR_EL2.TID2=1) any time that a
VM's CTR_EL0 differs from hardware.
Signed-off-by: Sebastian Ott <sebott@redhat.com>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Link: https://lore.kernel.org/r/20240619174036.483943-8-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
There are 2 functions to calculate traps via HCR_EL2:
* kvm_init_sysreg() called via KVM_RUN (before the 1st run or when
the pid changes)
* vcpu_reset_hcr() called via KVM_ARM_VCPU_INIT
To unify these 2 and to support traps that are dependent on the
ID register configuration, move the code from vcpu_reset_hcr()
to sys_regs.c and call it via kvm_init_sysreg().
We still have to keep the non-FWB handling stuff in vcpu_reset_hcr().
Also the initialization with HCR_GUEST_FLAGS is kept there but guarded
by !vcpu_has_run_once() to ensure that previous calculated values
don't get overwritten.
While at it rename kvm_init_sysreg() to kvm_calculate_traps() to
better reflect what it's doing.
Signed-off-by: Sebastian Ott <sebott@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20240619174036.483943-7-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
In the interest of abstracting away the underlying storage of feature
ID registers, rework the nested code to go through the accessors instead
of directly iterating the id_regs array.
This means we now lose the property that ID registers unknown to the
nested code get zeroed, but we really ought to be handling those
explicitly going forward.
Link: https://lore.kernel.org/r/20240619174036.483943-6-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Replace the remaining usage of IDREG() with a new helper for setting the
value of a feature ID register, with the benefit of cramming in some
extra sanity checks.
Reviewed-by: Sebastian Ott <sebott@redhat.com>
Link: https://lore.kernel.org/r/20240619174036.483943-5-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
IDREG() expands to the storage of a particular ID reg, which can be
useful for handling both reads and writes. However, outside of a select
few situations, the ID registers should be considered read only.
Replace current readers with a new macro that expands to the value of
the field rather than the field itself.
Reviewed-by: Sebastian Ott <sebott@redhat.com>
Link: https://lore.kernel.org/r/20240619174036.483943-4-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Add Stage-2 mmu data structures for virtual EL2 and for nested guests.
We don't yet populate shadow Stage-2 page tables, but we now have a
framework for getting to a shadow Stage-2 pgd.
We allocate twice the number of vcpus as Stage-2 mmu structures because
that's sufficient for each vcpu running two translation regimes without
having to flush the Stage-2 page tables.
Co-developed-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240614144552.2773592-2-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Delete kvm_arch_sched_in() now that all implementations are nops.
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20240522014013.1672962-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Now that we have introduced finalize_init_hyp_mode(), lets
consolidate the initializing of the host_data fpsimd_state and
sve state.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240603122852.3923848-8-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Protected mode needs to maintain (save/restore) the host's sve
state, rather than relying on the host kernel to do that. This is
to avoid leaking information to the host about guests and the
type of operations they are performing.
As a first step towards that, allocate memory mapped at hyp, per
cpu, for the host sve state. The following patch will use this
memory to save/restore the host state.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20240603122852.3923848-6-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/mpidr-reset:
: .
: Fixes for CLIDR_EL1 and MPIDR_EL1 being accidentally mutable across
: a vcpu reset, courtesy of Oliver. From the cover letter:
:
: "For VM-wide feature ID registers we ensure they get initialized once for
: the lifetime of a VM. On the other hand, vCPU-local feature ID registers
: get re-initialized on every vCPU reset, potentially clobbering the
: values userspace set up.
:
: MPIDR_EL1 and CLIDR_EL1 are the only registers in this space that we
: allow userspace to modify for now. Clobbering the value of MPIDR_EL1 has
: some disastrous side effects as the compressed index used by the
: MPIDR-to-vCPU lookup table assumes MPIDR_EL1 is immutable after KVM_RUN.
:
: Series + reproducer test case to address the problem of KVM wiping out
: userspace changes to these registers. Note that there are still some
: differences between VM and vCPU scoped feature ID registers from the
: perspective of userspace. We do not allow the value of VM-scope
: registers to change after KVM_RUN, but vCPU registers remain mutable."
: .
KVM: selftests: arm64: Test vCPU-scoped feature ID registers
KVM: selftests: arm64: Test that feature ID regs survive a reset
KVM: selftests: arm64: Store expected register value in set_id_regs
KVM: selftests: arm64: Rename helper in set_id_regs to imply VM scope
KVM: arm64: Only reset vCPU-scoped feature ID regs once
KVM: arm64: Reset VM feature ID regs from kvm_reset_sys_regs()
KVM: arm64: Rename is_id_reg() to imply VM scope
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The general expecation with feature ID registers is that they're 'reset'
exactly once by KVM for the lifetime of a vCPU/VM, such that any
userspace changes to the CPU features / identity are honored after a
vCPU gets reset (e.g. PSCI_ON).
KVM handles what it calls VM-scoped feature ID registers correctly, but
feature ID registers local to a vCPU (CLIDR_EL1, MPIDR_EL1) get wiped
after every reset. What's especially concerning is that a
potentially-changing MPIDR_EL1 breaks MPIDR compression for indexing
mpidr_data, as the mask of useful bits to build the index could change.
This is absolutely no good. Avoid resetting vCPU feature ID registers
more than once.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240502233529.1958459-4-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/misc-6.10:
: .
: Misc fixes and updates targeting 6.10
:
: - Improve boot-time diagnostics when the sysreg tables
: are not correctly sorted
:
: - Allow FFA_MSG_SEND_DIRECT_REQ in the FFA proxy
:
: - Fix duplicate XNX field in the ID_AA64MMFR1_EL1
: writeable mask
:
: - Allocate PPIs and SGIs outside of the vcpu structure, allowing
: for smaller EL2 mapping and some flexibility in implementing
: more or less than 32 private IRQs.
:
: - Use bitmap_gather() instead of its open-coded equivalent
:
: - Make protected mode use hVHE if available
:
: - Purge stale mpidr_data if a vcpu is created after the MPIDR
: map has been created
: .
KVM: arm64: Destroy mpidr_data for 'late' vCPU creation
KVM: arm64: Use hVHE in pKVM by default on CPUs with VHE support
KVM: arm64: Fix hvhe/nvhe early alias parsing
KVM: arm64: Convert kvm_mpidr_index() to bitmap_gather()
KVM: arm64: vgic: Allocate private interrupts on demand
KVM: arm64: Remove duplicated AA64MMFR1_EL1 XNX
KVM: arm64: Remove FFA_MSG_SEND_DIRECT_REQ from the denylist
KVM: arm64: Improve out-of-order sysreg table diagnostics
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/pkvm-6.10: (25 commits)
: .
: At last, a bunch of pKVM patches, courtesy of Fuad Tabba.
: From the cover letter:
:
: "This series is a bit of a bombay-mix of patches we've been
: carrying. There's no one overarching theme, but they do improve
: the code by fixing existing bugs in pKVM, refactoring code to
: make it more readable and easier to re-use for pKVM, or adding
: functionality to the existing pKVM code upstream."
: .
KVM: arm64: Force injection of a data abort on NISV MMIO exit
KVM: arm64: Restrict supported capabilities for protected VMs
KVM: arm64: Refactor setting the return value in kvm_vm_ioctl_enable_cap()
KVM: arm64: Document the KVM/arm64-specific calls in hypercalls.rst
KVM: arm64: Rename firmware pseudo-register documentation file
KVM: arm64: Reformat/beautify PTP hypercall documentation
KVM: arm64: Clarify rationale for ZCR_EL1 value restored on guest exit
KVM: arm64: Introduce and use predicates that check for protected VMs
KVM: arm64: Add is_pkvm_initialized() helper
KVM: arm64: Simplify vgic-v3 hypercalls
KVM: arm64: Move setting the page as dirty out of the critical section
KVM: arm64: Change kvm_handle_mmio_return() return polarity
KVM: arm64: Fix comment for __pkvm_vcpu_init_traps()
KVM: arm64: Prevent kmemleak from accessing .hyp.data
KVM: arm64: Do not map the host fpsimd state to hyp in pKVM
KVM: arm64: Rename __tlb_switch_to_{guest,host}() in VHE
KVM: arm64: Support TLB invalidation in guest context
KVM: arm64: Avoid BBM when changing only s/w bits in Stage-2 PTE
KVM: arm64: Check for PTE validity when checking for executable/cacheable
KVM: arm64: Avoid BUG-ing from the host abort path
...
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/nv-eret-pauth:
: .
: Add NV support for the ERETAA/ERETAB instructions. From the cover letter:
:
: "Although the current upstream NV support has *some* support for
: correctly emulating ERET, that support is only partial as it doesn't
: support the ERETAA and ERETAB variants.
:
: Supporting these instructions was cast aside for a long time as it
: involves implementing some form of PAuth emulation, something I wasn't
: overly keen on. But I have reached a point where enough of the
: infrastructure is there that it actually makes sense. So here it is!"
: .
KVM: arm64: nv: Work around lack of pauth support in old toolchains
KVM: arm64: Drop trapping of PAuth instructions/keys
KVM: arm64: nv: Advertise support for PAuth
KVM: arm64: nv: Handle ERETA[AB] instructions
KVM: arm64: nv: Add emulation for ERETAx instructions
KVM: arm64: nv: Add kvm_has_pauth() helper
KVM: arm64: nv: Reinject PAC exceptions caused by HCR_EL2.API==0
KVM: arm64: nv: Handle HCR_EL2.{API,APK} independently
KVM: arm64: nv: Honor HFGITR_EL2.ERET being set
KVM: arm64: nv: Fast-track 'InHost' exception returns
KVM: arm64: nv: Add trap forwarding for ERET and SMC
KVM: arm64: nv: Configure HCR_EL2 for FEAT_NV2
KVM: arm64: nv: Drop VCPU_HYP_CONTEXT flag
KVM: arm64: Constraint PAuth support to consistent implementations
KVM: arm64: Add helpers for ESR_ELx_ERET_ISS_ERET*
KVM: arm64: Harden __ctxt_sys_reg() against out-of-range values
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Linux 6.9 has introduced new bitmap manipulation helpers, with
bitmap_gather() being of special interest, as it does exactly
what kvm_mpidr_index() is already doing.
Make the latter a wrapper around the former.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240502154247.3012042-1-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
In order to determine whether or not a VM or vcpu are protected,
introduce helpers to query this state. While at it, use the vcpu
helper to check vcpus protected state instead of the kvm one.
Co-authored-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Fuad Tabba <tabba@google.com>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240423150538.2103045-19-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
pKVM maintains its own state at EL2 for tracking the host fpsimd
state. Therefore, no need to map and share the host's view with
it.
Signed-off-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240423150538.2103045-12-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
To avoid direct comparison against the fp_owner enum, add a new
function that performs the check, host_owns_fp_regs(), to
complement the existing guest_owns_fp_regs().
To check for fpsimd state ownership, use the helpers instead of
directly using the enums.
No functional change intended.
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240423150538.2103045-4-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
guest_owns_fp_regs() will be used to check fpsimd state ownership
across kvm/arm64. Therefore, move it to kvm_host.h to widen its
scope.
Moreover, the host state is not per-vcpu anymore, the vcpu
parameter isn't used, so remove it as well.
No functional change intended.
Signed-off-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240423150538.2103045-3-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Pointer Authentication comes in many flavors, and a faithful emulation
relies on correctly handling the flavour implemented by the HW.
For this, provide a new kvm_has_pauth() that checks whether we
expose to the guest a particular level of support. This checks
across all 3 possible authentication algorithms (Q5, Q3 and IMPDEF).
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240419102935.1935571-12-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
It has become obvious that HCR_EL2.NV serves the exact same use
as VCPU_HYP_CONTEXT, only in an architectural way. So just drop
the flag for good.
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240419102935.1935571-5-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The unsuspecting kernel tinkerer can be easily confused into
writing something that looks like this:
ikey.lo = __vcpu_sys_reg(vcpu, SYS_APIAKEYLO_EL1);
which seems vaguely sensible, until you realise that the second
parameter is the encoding of a sysreg, and not the index into
the vcpu sysreg file... Debugging what happens in this case is
an interesting exercise in head<->wall interactions.
As they often say: "Any resemblance to actual persons, living
or dead, or actual events is purely coincidental".
In order to save people's time, add some compile-time hardening
that will at least weed out the "stupidly out of range" values.
This will *not* catch anything that isn't a compile-time constant.
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240419102935.1935571-2-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
In retrospect, it is fairly obvious that the FP state ownership
is only meaningful for a given CPU, and that locating this
information in the vcpu was just a mistake.
Move the ownership tracking into the host data structure, and
rename it from fp_state to fp_owner, which is a better description
(name suggested by Mark Brown).
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
As the name of the field indicates, host_fpsimd_state is strictly
a host piece of data, and we reset this pointer on each PID change.
So let's move it where it belongs, and set it at load-time. Although
this is slightly more often, it is a well defined life-cycle which
matches other pieces of data.
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
As for the rest of the host debug state, the host copy of mdcr_el2
has little to do in the vcpu, and is better placed in the host_data
structure.
Reviewed-by : Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Keeping host_debug_state on a per-vcpu basis is completely
pointless. The lifetime of this data is only that of the inner
run-loop, which means it is never accessed outside of the core
EL2 code.
Move the structure into kvm_host_data, and save over 500 bytes
per vcpu.
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
In order to facilitate the introduction of new per-CPU state,
add a new host_data_ptr() helped that hides some of the per-CPU
verbosity, and make it easier to move that state around in the
future.
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Pull kvm updates from Paolo Bonzini:
"S390:
- Changes to FPU handling came in via the main s390 pull request
- Only deliver to the guest the SCLP events that userspace has
requested
- More virtual vs physical address fixes (only a cleanup since
virtual and physical address spaces are currently the same)
- Fix selftests undefined behavior
x86:
- Fix a restriction that the guest can't program a PMU event whose
encoding matches an architectural event that isn't included in the
guest CPUID. The enumeration of an architectural event only says
that if a CPU supports an architectural event, then the event can
be programmed *using the architectural encoding*. The enumeration
does NOT say anything about the encoding when the CPU doesn't
report support the event *in general*. It might support it, and it
might support it using the same encoding that made it into the
architectural PMU spec
- Fix a variety of bugs in KVM's emulation of RDPMC (more details on
individual commits) and add a selftest to verify KVM correctly
emulates RDMPC, counter availability, and a variety of other
PMC-related behaviors that depend on guest CPUID and therefore are
easier to validate with selftests than with custom guests (aka
kvm-unit-tests)
- Zero out PMU state on AMD if the virtual PMU is disabled, it does
not cause any bug but it wastes time in various cases where KVM
would check if a PMC event needs to be synthesized
- Optimize triggering of emulated events, with a nice ~10%
performance improvement in VM-Exit microbenchmarks when a vPMU is
exposed to the guest
- Tighten the check for "PMI in guest" to reduce false positives if
an NMI arrives in the host while KVM is handling an IRQ VM-Exit
- Fix a bug where KVM would report stale/bogus exit qualification
information when exiting to userspace with an internal error exit
code
- Add a VMX flag in /proc/cpuinfo to report 5-level EPT support
- Rework TDP MMU root unload, free, and alloc to run with mmu_lock
held for read, e.g. to avoid serializing vCPUs when userspace
deletes a memslot
- Tear down TDP MMU page tables at 4KiB granularity (used to be
1GiB). KVM doesn't support yielding in the middle of processing a
zap, and 1GiB granularity resulted in multi-millisecond lags that
are quite impolite for CONFIG_PREEMPT kernels
- Allocate write-tracking metadata on-demand to avoid the memory
overhead when a kernel is built with i915 virtualization support
but the workloads use neither shadow paging nor i915 virtualization
- Explicitly initialize a variety of on-stack variables in the
emulator that triggered KMSAN false positives
- Fix the debugregs ABI for 32-bit KVM
- Rework the "force immediate exit" code so that vendor code
ultimately decides how and when to force the exit, which allowed
some optimization for both Intel and AMD
- Fix a long-standing bug where kvm_has_noapic_vcpu could be left
elevated if vCPU creation ultimately failed, causing extra
unnecessary work
- Cleanup the logic for checking if the currently loaded vCPU is
in-kernel
- Harden against underflowing the active mmu_notifier invalidation
count, so that "bad" invalidations (usually due to bugs elsehwere
in the kernel) are detected earlier and are less likely to hang the
kernel
x86 Xen emulation:
- Overlay pages can now be cached based on host virtual address,
instead of guest physical addresses. This removes the need to
reconfigure and invalidate the cache if the guest changes the gpa
but the underlying host virtual address remains the same
- When possible, use a single host TSC value when computing the
deadline for Xen timers in order to improve the accuracy of the
timer emulation
- Inject pending upcall events when the vCPU software-enables its
APIC to fix a bug where an upcall can be lost (and to follow Xen's
behavior)
- Fall back to the slow path instead of warning if "fast" IRQ
delivery of Xen events fails, e.g. if the guest has aliased xAPIC
IDs
RISC-V:
- Support exception and interrupt handling in selftests
- New self test for RISC-V architectural timer (Sstc extension)
- New extension support (Ztso, Zacas)
- Support userspace emulation of random number seed CSRs
ARM:
- Infrastructure for building KVM's trap configuration based on the
architectural features (or lack thereof) advertised in the VM's ID
registers
- Support for mapping vfio-pci BARs as Normal-NC (vaguely similar to
x86's WC) at stage-2, improving the performance of interacting with
assigned devices that can tolerate it
- Conversion of KVM's representation of LPIs to an xarray, utilized
to address serialization some of the serialization on the LPI
injection path
- Support for _architectural_ VHE-only systems, advertised through
the absence of FEAT_E2H0 in the CPU's ID register
- Miscellaneous cleanups, fixes, and spelling corrections to KVM and
selftests
LoongArch:
- Set reserved bits as zero in CPUCFG
- Start SW timer only when vcpu is blocking
- Do not restart SW timer when it is expired
- Remove unnecessary CSR register saving during enter guest
- Misc cleanups and fixes as usual
Generic:
- Clean up Kconfig by removing CONFIG_HAVE_KVM, which was basically
always true on all architectures except MIPS (where Kconfig
determines the available depending on CPU capabilities). It is
replaced either by an architecture-dependent symbol for MIPS, and
IS_ENABLED(CONFIG_KVM) everywhere else
- Factor common "select" statements in common code instead of
requiring each architecture to specify it
- Remove thoroughly obsolete APIs from the uapi headers
- Move architecture-dependent stuff to uapi/asm/kvm.h
- Always flush the async page fault workqueue when a work item is
being removed, especially during vCPU destruction, to ensure that
there are no workers running in KVM code when all references to
KVM-the-module are gone, i.e. to prevent a very unlikely
use-after-free if kvm.ko is unloaded
- Grab a reference to the VM's mm_struct in the async #PF worker
itself instead of gifting the worker a reference, so that there's
no need to remember to *conditionally* clean up after the worker
Selftests:
- Reduce boilerplate especially when utilize selftest TAP
infrastructure
- Add basic smoke tests for SEV and SEV-ES, along with a pile of
library support for handling private/encrypted/protected memory
- Fix benign bugs where tests neglect to close() guest_memfd files"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (246 commits)
selftests: kvm: remove meaningless assignments in Makefiles
KVM: riscv: selftests: Add Zacas extension to get-reg-list test
RISC-V: KVM: Allow Zacas extension for Guest/VM
KVM: riscv: selftests: Add Ztso extension to get-reg-list test
RISC-V: KVM: Allow Ztso extension for Guest/VM
RISC-V: KVM: Forward SEED CSR access to user space
KVM: riscv: selftests: Add sstc timer test
KVM: riscv: selftests: Change vcpu_has_ext to a common function
KVM: riscv: selftests: Add guest helper to get vcpu id
KVM: riscv: selftests: Add exception handling support
LoongArch: KVM: Remove unnecessary CSR register saving during enter guest
LoongArch: KVM: Do not restart SW timer when it is expired
LoongArch: KVM: Start SW timer only when vcpu is blocking
LoongArch: KVM: Set reserved bits as zero in CPUCFG
KVM: selftests: Explicitly close guest_memfd files in some gmem tests
KVM: x86/xen: fix recursive deadlock in timer injection
KVM: pfncache: simplify locking and make more self-contained
KVM: x86/xen: remove WARN_ON_ONCE() with false positives in evtchn delivery
KVM: x86/xen: inject vCPU upcall vector when local APIC is enabled
KVM: x86/xen: improve accuracy of Xen timers
...
|
|
FEAT_FPMR defines a new EL0 accessible register FPMR use to configure the
FP8 related features added to the architecture at the same time. Detect
support for this register and context switch it for EL0 when present.
Due to the sharing of responsibility for saving floating point state
between the host kernel and KVM FP8 support is not yet implemented in KVM
and a stub similar to that used for SVCR is provided for FPMR in order to
avoid bisection issues. To make it easier to share host state with the
hypervisor we store FPMR as a hardened usercopy field in uw (along with
some padding).
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240306-arm64-2023-dpisa-v5-3-c568edc8ed7f@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Testing KVM with DEBUG_ATOMIC_SLEEP enabled doesn't get far before hitting the
first splat:
BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:1578
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 13062, name: vgic_lpi_stress
preempt_count: 1, expected: 0
2 locks held by vgic_lpi_stress/13062:
#0: ffff080084553240 (&vcpu->mutex){+.+.}-{3:3}, at: kvm_vcpu_ioctl+0xc0/0x13f0
#1: ffff800080485f08 (&kvm->arch.config_lock){+.+.}-{3:3}, at: kvm_arch_vcpu_ioctl+0xd60/0x1788
CPU: 19 PID: 13062 Comm: vgic_lpi_stress Tainted: G W O 6.8.0-dbg-DEV #1
Call trace:
dump_backtrace+0xf8/0x148
show_stack+0x20/0x38
dump_stack_lvl+0xb4/0xf8
dump_stack+0x18/0x40
__might_resched+0x248/0x2a0
__might_sleep+0x50/0x88
down_write+0x30/0x150
start_creating+0x90/0x1a0
__debugfs_create_file+0x5c/0x1b0
debugfs_create_file+0x34/0x48
kvm_reset_sys_regs+0x120/0x1e8
kvm_reset_vcpu+0x148/0x270
kvm_arch_vcpu_ioctl+0xddc/0x1788
kvm_vcpu_ioctl+0xb6c/0x13f0
__arm64_sys_ioctl+0x98/0xd8
invoke_syscall+0x48/0x108
el0_svc_common+0xb4/0xf0
do_el0_svc+0x24/0x38
el0_svc+0x54/0x128
el0t_64_sync_handler+0x68/0xc0
el0t_64_sync+0x1a8/0x1b0
kvm_reset_vcpu() disables preemption as it needs to unload vCPU state
from the CPU to twiddle with it, which subsequently explodes when
taking the parent inode's rwsem while creating the idreg debugfs file.
Fix it by moving the initialization to kvm_arch_create_vm_debugfs().
Fixes: 891766581dea ("KVM: arm64: Add debugfs file for guest's ID registers")
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240227094115.1723330-3-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Debugging ID register setup can be a complicated affair. Give the
kernel hacker a way to dump that state in an easy to parse way.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240214131827.2856277-27-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
We unconditionally enable FEAT_MOPS, which is obviously wrong.
So let's only do that when it is advertised to the guest.
Which means we need to rely on a per-vcpu HCRX_EL2 shadow register.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Link: https://lore.kernel.org/r/20240214131827.2856277-25-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
We already trap a bunch of existing features for the purpose of
disabling them (MAIR2, POR, ACCDATA, SME...).
Let's move them over to our brand new FGU infrastructure.
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240214131827.2856277-20-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
In order to efficiently handle system register access being disabled,
and this resulting in an UNDEF exception being injected, we introduce
the (slightly dubious) concept of Fine-Grained UNDEF, modeled after
the architectural Fine-Grained Traps.
For each FGT group, we keep a 64 bit word that has the exact same
bit assignment as the corresponding FGT register, where a 1 indicates
that trapping this register should result in an UNDEF exception being
reinjected.
So far, nothing populates this information, nor sets the corresponding
trap bits.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240214131827.2856277-18-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
In order to reduce the number of lookups that we have to perform
when handling a sysreg, register each AArch64 sysreg descriptor
with the global xarray. The index of the descriptor is stored
as a 10 bit field in the data word.
Subsequent patches will retrieve and use the stored index.
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240214131827.2856277-15-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
VNCR-backed "registers" are actually only memory. Which means that
there is zero control over what the guest can write, and that it
is the hypervisor's job to actually sanitise the content of the
backing store. Yeah, this is fun.
In order to preserve some form of sanity, add a repainting mechanism
that makes use of a per-VM set of RES0/RES1 masks, one pair per VNCR
register. These masks get applied on access to the backing store via
__vcpu_sys_reg(), ensuring that the state that is consumed by KVM is
correct.
So far, nothing populates these masks, but stay tuned.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Link: https://lore.kernel.org/r/20240214131827.2856277-4-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
In order to make it easier to check whether a particular feature
is exposed to a guest, add a new set of helpers, with kvm_has_feat()
being the most useful.
Let's start making use of them in the PMU code (courtesy of Oliver).
Follow-up changes will introduce additional use patterns.
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Co-developed--by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240214131827.2856277-3-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for Linux 6.8
- LPA2 support, adding 52bit IPA/PA capability for 4kB and 16kB
base granule sizes. Branch shared with the arm64 tree.
- Large Fine-Grained Trap rework, bringing some sanity to the
feature, although there is more to come. This comes with
a prefix branch shared with the arm64 tree.
- Some additional Nested Virtualization groundwork, mostly
introducing the NV2 VNCR support and retargetting the NV
support to that version of the architecture.
- A small set of vgic fixes and associated cleanups.
|
|
* kvm-arm64/nv-6.8-prefix:
: .
: Nested Virtualization support update, focussing on the
: NV2 support (VNCR mapping and such).
: .
KVM: arm64: nv: Handle virtual EL2 registers in vcpu_read/write_sys_reg()
KVM: arm64: nv: Map VNCR-capable registers to a separate page
KVM: arm64: nv: Add EL2_REG_VNCR()/EL2_REG_REDIR() sysreg helpers
KVM: arm64: Introduce a bad_trap() primitive for unexpected trap handling
KVM: arm64: nv: Add include containing the VNCR_EL2 offsets
KVM: arm64: nv: Add non-VHE-EL2->EL1 translation helpers
KVM: arm64: nv: Drop EL12 register traps that are redi |
