| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 5.10, take #1
- Force PTE mapping on device pages provided via VFIO
- Fix detection of cacheable mapping at S2
- Fallback to PMD/PTE mappings for composite huge pages
- Fix accounting of Stage-2 PGD allocation
- Fix AArch32 handling of some of the debug registers
- Simplify host HYP entry
- Fix stray pointer conversion on nVHE TLB invalidation
- Fix initialization of the nVHE code
- Simplify handling of capabilities exposed to HYP
- Nuke VCPUs caught using a forbidden AArch32 EL0
|
|
We finalize caps before initializing kvm hyp code, and any use of
cpus_have_const_cap() in kvm hyp code generates redundant and
potentially unsound code to read the cpu_hwcaps array.
A number of helper functions used in both hyp context and regular kernel
context use cpus_have_const_cap(), as some regular kernel code runs
before the capabilities are finalized. It's tedious and error-prone to
write separate copies of these for hyp and non-hyp code.
So that we can avoid the redundant code, let's automatically upgrade
cpus_have_const_cap() to cpus_have_final_cap() when used in hyp context.
With this change, there's never a reason to access to cpu_hwcaps array
from hyp code, and we don't need to create an NVHE alias for this.
This should have no effect on non-hyp code.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Cc: David Brazdil <dbrazdil@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201026134931.28246-4-mark.rutland@arm.com
|
|
Pull KVM updates from Paolo Bonzini:
"For x86, there is a new alternative and (in the future) more scalable
implementation of extended page tables that does not need a reverse
map from guest physical addresses to host physical addresses.
For now it is disabled by default because it is still lacking a few of
the existing MMU's bells and whistles. However it is a very solid
piece of work and it is already available for people to hammer on it.
Other updates:
ARM:
- New page table code for both hypervisor and guest stage-2
- Introduction of a new EL2-private host context
- Allow EL2 to have its own private per-CPU variables
- Support of PMU event filtering
- Complete rework of the Spectre mitigation
PPC:
- Fix for running nested guests with in-kernel IRQ chip
- Fix race condition causing occasional host hard lockup
- Minor cleanups and bugfixes
x86:
- allow trapping unknown MSRs to userspace
- allow userspace to force #GP on specific MSRs
- INVPCID support on AMD
- nested AMD cleanup, on demand allocation of nested SVM state
- hide PV MSRs and hypercalls for features not enabled in CPUID
- new test for MSR_IA32_TSC writes from host and guest
- cleanups: MMU, CPUID, shared MSRs
- LAPIC latency optimizations ad bugfixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (232 commits)
kvm: x86/mmu: NX largepage recovery for TDP MMU
kvm: x86/mmu: Don't clear write flooding count for direct roots
kvm: x86/mmu: Support MMIO in the TDP MMU
kvm: x86/mmu: Support write protection for nesting in tdp MMU
kvm: x86/mmu: Support disabling dirty logging for the tdp MMU
kvm: x86/mmu: Support dirty logging for the TDP MMU
kvm: x86/mmu: Support changed pte notifier in tdp MMU
kvm: x86/mmu: Add access tracking for tdp_mmu
kvm: x86/mmu: Support invalidate range MMU notifier for TDP MMU
kvm: x86/mmu: Allocate struct kvm_mmu_pages for all pages in TDP MMU
kvm: x86/mmu: Add TDP MMU PF handler
kvm: x86/mmu: Remove disallowed_hugepage_adjust shadow_walk_iterator arg
kvm: x86/mmu: Support zapping SPTEs in the TDP MMU
KVM: Cache as_id in kvm_memory_slot
kvm: x86/mmu: Add functions to handle changed TDP SPTEs
kvm: x86/mmu: Allocate and free TDP MMU roots
kvm: x86/mmu: Init / Uninit the TDP MMU
kvm: x86/mmu: Introduce tdp_iter
KVM: mmu: extract spte.h and spte.c
KVM: mmu: Separate updating a PTE from kvm_set_pte_rmapp
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Updates for the interrupt subsystem:
Core:
- Allow trimming of interrupt hierarchy to support odd hardware
setups where only a subset of the interrupts requires the full
hierarchy.
- Allow the retrigger mechanism to follow a hierarchy to simplify
driver code.
- Provide a mechanism to force enable wakeup interrrupts on suspend.
- More infrastructure to handle IPIs in the core code
Architectures:
- Convert ARM/ARM64 IPI handling to utilize the interrupt core code.
Drivers:
- The usual pile of new interrupt chips (MStar, Actions Owl, TI
PRUSS, Designware ICTL)
- ARM(64) IPI related conversions
- Wakeup support for Qualcom PDC
- Prevent hierarchy corruption in the NVIDIA Tegra driver
- The usual small fixes, improvements and cleanups all over the
place"
* tag 'irq-core-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (59 commits)
dt-bindings: interrupt-controller: Add MStar interrupt controller
irqchip/irq-mst: Add MStar interrupt controller support
soc/tegra: pmc: Don't create fake interrupt hierarchy levels
soc/tegra: pmc: Allow optional irq parent callbacks
gpio: tegra186: Allow optional irq parent callbacks
genirq/irqdomain: Allow partial trimming of irq_data hierarchy
irqchip/qcom-pdc: Reset PDC interrupts during init
irqchip/qcom-pdc: Set IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND flag
pinctrl: qcom: Set IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND flag
genirq/PM: Introduce IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND flag
pinctrl: qcom: Use return value from irq_set_wake() call
pinctrl: qcom: Set IRQCHIP_SET_TYPE_MASKED and IRQCHIP_MASK_ON_SUSPEND flags
ARM: Handle no IPI being registered in show_ipi_list()
MAINTAINERS: Add entries for Actions Semi Owl SIRQ controller
irqchip: Add Actions Semi Owl SIRQ controller
dt-bindings: interrupt-controller: Add Actions SIRQ controller binding
dt-bindings: dw-apb-ictl: Update binding to describe use as primary interrupt controller
irqchip/dw-apb-ictl: Add primary interrupt controller support
irqchip/dw-apb-ictl: Refactor priot to introducing hierarchical irq domains
genirq: Add stub for set_handle_irq() when !GENERIC_IRQ_MULTI_HANDLER
...
|
|
kvm-arm64/hyp-pcpu
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Host CPU context is stored in a global per-cpu variable `kvm_host_data`.
In preparation for introducing independent per-CPU region for nVHE hyp,
create two separate instances of `kvm_host_data`, one for VHE and one
for nVHE.
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200922204910.7265-9-dbrazdil@google.com
|
|
Hyp keeps track of which cores require SSBD callback by accessing a
kernel-proper global variable. Create an nVHE symbol of the same name
and copy the value from kernel proper to nVHE as KVM is being enabled
on a core.
Done in preparation for separating percpu memory owned by kernel
proper and nVHE.
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200922204910.7265-8-dbrazdil@google.com
|
|
Minor cleanup to move all macros related to prefixing nVHE hyp section
and symbol names into one place: hyp_image.h.
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200922204910.7265-3-dbrazdil@google.com
|
|
Owing to the fact that the host kernel is always mitigated, we can
drastically simplify the WA2 handling by keeping the mitigation
state ON when entering the guest. This means the guest is either
unaffected or not mitigated.
This results in a nice simplification of the mitigation space,
and the removal of a lot of code that was never really used anyway.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The GIC's internal view of the priority mask register and the assigned
interrupt priorities are based on whether GIC security is enabled and
whether firmware routes Group 0 interrupts to EL3. At the moment, we
support priority masking when ICC_PMR_EL1 and interrupt priorities are
either both modified by the GIC, or both left unchanged.
Trusted Firmware-A's default interrupt routing model allows Group 0
interrupts to be delivered to the non-secure world (SCR_EL3.FIQ == 0).
Unfortunately, this is precisely the case that the GIC driver doesn't
support: ICC_PMR_EL1 remains unchanged, but the GIC's view of interrupt
priorities is different from the software programmed values.
Support pseudo-NMIs when SCR_EL3.FIQ == 0 by using a different value to
mask regular interrupts. All the other values remain the same.
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200912153707.667731-3-alexandru.elisei@arm.com
|
|
KVM has a one instruction window where it will allow an SError exception
to be consumed by the hypervisor without treating it as a hypervisor bug.
This is used to consume asynchronous external abort that were caused by
the guest.
As we are about to add another location that survives unexpected exceptions,
generalise this code to make it behave like the host's extable.
KVM's version has to be mapped to EL2 to be accessible on nVHE systems.
The SError vaxorcism code is a one instruction window, so has two entries
in the extable. Because the KVM code is copied for VHE and nVHE, we end up
with four entries, half of which correspond with code that isn't mapped.
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The following files in hyp/ contain only code shared by VHE/nVHE:
vgic-v3-sr.c, aarch32.c, vgic-v2-cpuif-proxy.c, entry.S, fpsimd.S
Compile them under both configurations. Deletions in image-vars.h reflect
eliminated dependencies of nVHE code on the rest of the kernel.
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200625131420.71444-14-dbrazdil@google.com
|
|
timer-sr.c contains a HVC handler for setting CNTVOFF_EL2 and two helper
functions for controlling access to physical counter. The former is used by
both VHE/nVHE and is duplicated, the latter are used only by nVHE and moved
to nvhe/timer-sr.c.
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200625131420.71444-13-dbrazdil@google.com
|
|
sysreg-sr.c contains KVM's code for saving/restoring system registers, with
some code shared between VHE/nVHE. These common routines are moved to
a header file, VHE-specific code is moved to vhe/sysreg-sr.c and nVHE-specific
code to nvhe/sysreg-sr.c.
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200625131420.71444-12-dbrazdil@google.com
|
|
debug-sr.c contains KVM's code for context-switching debug registers, with some
code shared between VHE/nVHE. These common routines are moved to a header file,
VHE-specific code is moved to vhe/debug-sr.c and nVHE-specific code to
nvhe/debug-sr.c.
Functions are slightly refactored to move code hidden behind `has_vhe()` checks
to the corresponding .c files.
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200625131420.71444-11-dbrazdil@google.com
|
|
switch.c implements context-switching for KVM, with large parts shared between
VHE/nVHE. These common routines are moved to a header file, VHE-specific code
is moved to vhe/switch.c and nVHE-specific code is moved to nvhe/switch.c.
Previously __kvm_vcpu_run needed a different symbol name for VHE/nVHE. This
is cleaned up and the caller in arm.c simplified.
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200625131420.71444-10-dbrazdil@google.com
|
|
tlb.c contains code for flushing the TLB, with code shared between VHE/nVHE.
Because common code is small, duplicate tlb.c and specialize each copy for
VHE/nVHE.
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200625131420.71444-9-dbrazdil@google.com
|
|
hyp-init.S contains the identity mapped initialisation code for the
non-VHE code that runs at EL2. It is only used for non-VHE.
Adjust code that calls into this to use the prefixed symbol name.
Signed-off-by: Andrew Scull <ascull@google.com>
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200625131420.71444-8-dbrazdil@google.com
|
|
hyp-entry.S contains implementation of KVM hyp vectors. This code is mostly
shared between VHE/nVHE, therefore compile it under both VHE and nVHE build
rules. nVHE-specific host HVC handler is hidden behind __KVM_NVHE_HYPERVISOR__.
Adjust code which selects which KVM hyp vecs to install to choose the correct
VHE/nVHE symbol.
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200625131420.71444-7-dbrazdil@google.com
|
|
Once hyp functions are moved to a hyp object, they will have prefixed symbols.
This change declares and gets the address of the prefixed version for calls to
the hyp functions.
To aid migration, the hyp functions that have not yet moved have their prefixed
versions aliased to their non-prefixed version. This begins with all the hyp
functions being listed and will reduce to none of them once the migration is
complete.
Signed-off-by: Andrew Scull <ascull@google.com>
[David: Extracted kvm_call_hyp nVHE branches into own helper macros, added
comments around symbol aliases.]
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200625131420.71444-6-dbrazdil@google.com
|
|
Add new folders arch/arm64/kvm/hyp/{vhe,nvhe} and Makefiles for building code
that runs in EL2 under VHE/nVHE KVM, repsectivelly. Add an include folder for
hyp-specific header files which will include code common to VHE/nVHE.
Build nVHE code with -D__KVM_NVHE_HYPERVISOR__, VHE code with
-D__KVM_VHE_HYPERVISOR__.
Under nVHE compile each source file into a `.hyp.tmp.o` object first, then
prefix all its symbols with "__kvm_nvhe_" using `objcopy` and produce
a `.hyp.o`. Suffixes were chosen so that it would be possible for VHE and nVHE
to share some source files, but compiled with different CFLAGS.
The nVHE ELF symbol prefix is added to kallsyms.c as ignored. EL2-only symbols
will never appear in EL1 stack traces.
Due to symbol prefixing, add a section in image-vars.h for aliases of symbols
that are defined in nVHE EL2 and accessed by kernel in EL1 or vice versa.
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200625131420.71444-4-dbrazdil@google.com
|
|
For historical reasons, the primary entry routine living somewhere in
the inittext section is called stext(), which is confusing, given that
there is also a section marker called _stext which lives at a fixed
offset in the image (either 64 or 4096 bytes, depending on whether
CONFIG_EFI is enabled)
Let's rename stext to primary_entry(), which is a better description
and reflects the secondary_entry() routine that already exists for
SMP boot.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20200326171423.3080-1-ardb@kernel.org
Reviwed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Commit 9f9223778 ("efi/libstub/arm: Make efi_entry() an ordinary PE/COFF
entrypoint") modified the handover code written in assembler, and for
maintainability, aligned the logic with the logic used in the 32-bit ARM
version, which is to avoid cache maintenance on the remaining instructions
in the subroutine that will be executed with the MMU and caches off, and
instead, branch into the relocated copy of the kernel image.
However, this assumes that this copy is executable, and this means we
expect EFI_LOADER_DATA regions to be executable as well, which is not
a reasonable assumption to make, even if this is true for most UEFI
implementations today.
So change this back, and add a __clean_dcache_area_poc() call to cover
the remaining code in the subroutine. While at it, switch the other
call site over to __clean_dcache_area_poc() as well, and clean up the
terminology in comments to avoid using 'flush' in the context of cache
maintenance. Also, let's switch to the new style asm annotations.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: linux-efi@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20200228121408.9075-6-ardb@kernel.org
|
|
We currently parse the command non-destructively, to avoid having to
allocate memory for a copy before passing it to the standard parsing
routines that are used by the core kernel, and which modify the input
to delineate the parsed tokens with NUL characters.
Instead, we call strstr() and strncmp() to go over the input multiple
times, and match prefixes rather than tokens, which implies that we
would match, e.g., 'nokaslrfoo' in the stub and disable KASLR, while
the kernel would disregard the option and run with KASLR enabled.
In order to avoid having to reason about whether and how this behavior
may be abused, let's clean up the parsing routines, and rebuild them
on top of the existing helpers.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Expose efi_entry() as the PE/COFF entrypoint directly, instead of
jumping into a wrapper that fiddles with stack buffers and other
stuff that the compiler is much better at. The only reason this
code exists is to obtain a pointer to the base of the image, but
we can get the same value from the loaded_image protocol, which
we already need for other reasons anyway.
Update the return type as well, to make it consistent with what
is required for a PE/COFF executable entrypoint.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
It seems that LLVM's linker does not correctly handle variable assignments
involving section positions that are updated during the SECTIONS
parsing. Commit aa69fb62bea1 ("arm64/efi: Mark __efistub_stext_offset as
an absolute symbol explicitly") ran into this too, but found a different
workaround.
However, this was not enough, as other variables were also miscalculated
which manifested as boot failures under UEFI where __efistub__end was
not taking the correct _end value (they should be the same):
$ ld.lld -EL -maarch64elf --no-undefined -X -shared \
-Bsymbolic -z notext -z norelro --no-apply-dynamic-relocs \
-o vmlinux.lld -T poc.lds --whole-archive vmlinux.o && \
readelf -Ws vmlinux.lld | egrep '\b(__efistub_|)_end\b'
368272: ffff000002218000 0 NOTYPE LOCAL HIDDEN 38 __efistub__end
368322: ffff000012318000 0 NOTYPE GLOBAL DEFAULT 38 _end
$ aarch64-linux-gnu-ld.bfd -EL -maarch64elf --no-undefined -X -shared \
-Bsymbolic -z notext -z norelro --no-apply-dynamic-relocs \
-o vmlinux.bfd -T poc.lds --whole-archive vmlinux.o && \
readelf -Ws vmlinux.bfd | egrep '\b(__efistub_|)_end\b'
338124: ffff000012318000 0 NOTYPE LOCAL DEFAULT ABS __efistub__end
383812: ffff000012318000 0 NOTYPE GLOBAL DEFAULT 15325 _end
To work around this, all of the __efistub_-prefixed variable assignments
need to be moved after the linker script's SECTIONS entry. As it turns
out, this also solves the problem fixed in commit aa69fb62bea1, so those
changes are reverted here.
Link: https://github.com/ClangBuiltLinux/linux/issues/634
Link: https://bugs.llvm.org/show_bug.cgi?id=42990
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Will Deacon <will@kernel.org>
|
